GiroDisc brake rotor with curved grooves, representative image for A1-447
A1-035 Girodisc Porsche 981 Front Rotors, incl. spacers & bolts $1,320.00
Porsche 981 Front Rotors, incl. spacers & bolts Enhance the braking performance of your Porsche 981 with Girodisc’s precision-engineered two-piece floating front rotors. These rotors are a direct replacement for the OEM discs and come complete with spacers and bolts for a seamless installation. By increasing rotor size and reducing weight, Girodisc provides improved cooling, reduced fade, and faster braking response without altering your car’s factory bias or ABS functionality. Precision Engineering Meets Porsche Performance Machined in the USA from proprietary high-carbon cast iron and paired with 6061-T6 aluminum hats, Girodisc rotors deliver superior strength and temperature control. The curved vane internal design acts like a centrifugal pump, forcing cooling air through the rotor under load. The floating mount system allows for natural expansion under heat, reducing warping and maintaining smooth, consistent braking performance on both street and track. Vehicle Fitment • 2013–2016 Porsche Boxster (981)• 2013–2016 Porsche Cayman (981)• 2015–2016 Porsche Cayman GTS• 2014–2016 Porsche Boxster GTS• 2016 Porsche Boxster Spyder• 2016 Porsche Cayman GT4 Girodisc A1-035 Features • Direct bolt-on replacement with included spacers and bolts• Two-piece floating design reduces unsprung and rotational weight• 6061-T6 aircraft-grade aluminum hats, U.S.-made• Proprietary cast iron rings with curved internal vanes• Floating drive pin system with anti-noise spring washers• Enhanced thermal stability and fade resistance• Sold/priced per pair Porsche 981 Front Rotor FAQs: Does this kit include hardware? Yes, it includes all necessary spacers and bolts for installation. Do these rotors fit GT4 models? Yes, they are compatible with all 981 variants, including the Cayman GT4 and Boxster Spyder. Will these improve braking performance? Absolutely—expect improved pedal feel, reduced fade, and faster braking recovery. Are replacement rings available? Yes, Girodisc offers replacement rings to reuse your original aluminum hats for future servicing. Upgrade your Porsche 981 braking system with Girodisc front rotors—precision-built for drivers who demand performance, reliability, and balance on every lap.
GiroDisc brake rotor with curved grooves, representative image for A1-447
D1-126 GiroDisc Replacement Rotors $950.00
REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT. Competition Motorsport is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.
GiroDisc brake rotor with curved grooves, representative image for A1-447
A1-039 Girodisc Chevrolet Camaro SS (5th Gen) Front Rotors $1,200.00
Chevrolet Camaro SS (5th Gen) Front Rotors Unlock the full braking potential of your 5th Gen Camaro SS with Girodisc’s two-piece floating front rotors—crafted to deliver lighter weight, improved cooling, and uncompromised OEM fitment. Designed for drivers who demand better response and durability without altering brake bias or ABS operation, these rotors are the ultimate upgrade for street and track performance. Race-Bred Engineering for Street Precision Each Girodisc rotor is precision-machined in the USA from proprietary high-carbon cast iron and paired with a 6061-T6 aircraft-grade aluminum hat. The floating mount system with anti-noise spring washers allows the rotor to expand and contract with heat cycles, eliminating rattle and ensuring smooth operation. The curved vane internal design actively pumps air through the rotor, enhancing cooling efficiency under extreme braking loads. Vehicle Fitment • 2010–2015 Chevrolet Camaro SS (6.2L V8)• Compatible with factory Brembo front calipers Girodisc A1-039 Features • Direct bolt-on replacement for OEM rotors• Two-piece floating design reduces unsprung and rotational weight• U.S.-sourced 6061-T6 aluminum hats• Proprietary cast iron with curved internal vanes for maximum cooling• Floating drive pin system with anti-noise spring washers• Enhanced fade resistance and pedal feel• Sold/priced per pair Camaro SS Front Rotor FAQs: Are these compatible with factory Brembos? Yes, they are designed to work perfectly with the OEM Brembo calipers on the 5th Gen Camaro SS. Will they improve braking performance? Definitely. Reduced unsprung weight and better cooling deliver faster response and reduced fade. Can they handle track use? Yes, Girodisc rotors are track-proven and ideal for spirited driving or HPDE events. Can I replace just the rings later? Yes, replacement rings are available—simply reuse your aluminum hats for a cost-effective refresh. Take your Camaro SS braking to the next level with Girodisc’s proven two-piece rotor design—engineered for precision, endurance, and performance you can feel.
GiroDisc brake rotor with curved grooves, representative image for A1-447
D1-130 Girodisc Audi B8 S4/S5 Front Replacement Rings $720.00
D1-130 Girodisc Audi B8 S4, S5 Front Replacement Rings Enhance your Audi S4 or S5’s braking performance with Girodisc D1-130 345mm front replacement rings. These precision-machined rings bolt directly to your existing Girodisc aluminum hats using the supplied floating hardware kit. Each ring is crafted from Girodisc’s proprietary high-carbon cast iron, delivering improved cooling, reduced fade, and exceptional pedal consistency during high-performance street or track use. Vehicle Fitment Compatible with:• Audi S4 (B8/B8.5, 2010–2016)• Audi S5 Coupe & Cabriolet (B8/B8.5, 2008–2017)• Audi SQ5 (2014–2017)Note: Designed exclusively for Girodisc 345mm two-piece front rotor systems. Not compatible with OEM one-piece or carbon-ceramic rotors. Features • Sold as a left/right pair with complete floating hardware kit• Direct replacements for Girodisc 345mm two-piece front rotors• CNC-machined from high-carbon iron alloy for maximum strength and heat resistance• Directional curved vanes promote airflow and enhance heat dissipation• Maintains factory brake bias, ABS, and ESC calibration• Balanced and inspected to eliminate vibration• Designed exclusively for Girodisc aluminum hats Specifications • Diameter: 345 mm• Position: Front• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rotor rings and hardware kit• Sold/priced per pair Girodisc D1-130 Audi B8 S4/S5 Front Ring FAQs Can I use these rings with the OEM Audi rotor hats? No. These rings are only compatible with Girodisc aluminum hats and cannot mount to factory one-piece or ceramic setups. Which pad compounds are recommended? For street and light track use, Ferodo DS2500 are ideal. For aggressive track applications, use Pagid RS29 for consistent high-temperature performance. Are these rotors directional? Yes. Each rotor is clearly marked for left or right installation, ensuring the curved vanes channel air correctly through the disc for optimal cooling. What torque specification should I use on the hardware? Tighten all hardware bolts to 12 ft-lbs (16 Nm) using blue Loctite, and recheck torque after one full heat cycle or track session. Upgrade your Audi’s braking system with Girodisc D1-130 345mm front replacement rings — engineered for precision cooling, superior modulation, and performance that endures lap after lap.
GiroDisc brake rotor with curved grooves, representative image for A1-447
A1-053 Girodisc Audi B5 S4 with Alcon, StopTech BBK Front Rotors $1,050.00
Audi B5 S4 with Alcon, StopTech BBK Front Rotors Replace your aging or discontinued Stasis/Alcon rotors with precision-engineered Girodisc two-piece floating front rotors for the Audi B5 S4. These rotors are a complete replacement for the original hat and rotor assembly used in the 355x32mm Alcon or StopTech big brake kits, eliminating the need to chase rare or discontinued components. Designed for enthusiasts who demand top-tier braking control, Girodisc rotors combine advanced materials and race-proven design for consistent, fade-free performance. Engineered for Performance and Compatibility The Girodisc system bolts directly to your existing Alcon or StopTech calipers with no modifications required. Built from U.S.-sourced materials, each rotor features 6061-T6 aluminum hats mated to proprietary high-carbon cast iron rings. The result is a lighter, stronger, and more thermally stable rotor designed to handle extreme heat and repeated heavy braking without compromise. Vehicle Fitment • 2000–2002 Audi S4 (B5) with Alcon or StopTech 355x32mm BBK• 1998–2004 Audi A6 (C5) 2.7TT with Alcon or StopTech BBK• 2001–2005 Audi Allroad 2.7TT with Alcon or StopTech BBK***Does not fit RS6 or 4.2L V8 models.*** Features • Direct-fit replacement for Alcon and StopTech 355x32mm kits• 6061-T6 aluminum hats machined in the USA• Proprietary high-carbon iron rotor rings with curved vane internal cooling• Floating mount system with anti-noise spring washers• Lightweight two-piece design for improved handling and cooling• Sold/priced per pair Audi B5 S4 Front Rotor FAQs: Do these fit OEM brakes? No, these rotors are only for cars equipped with Alcon or StopTech 355x32mm big brake kits. Can these replace discontinued Stasis parts? Yes, they’re a direct replacement for the now-defunct Stasis/Alcon rotor setup. Are the hats reusable? Yes, Girodisc offers replacement rings so you can reuse the aluminum hats for future rebuilds. Will they improve braking performance? Absolutely—reduced unsprung mass, enhanced cooling, and consistent heat dissipation provide track-ready stopping confidence. Upgrade your Audi’s braking system with Girodisc precision rotors—made for enthusiasts who demand reliability, performance, and uncompromising quality.
GiroDisc brake rotor with curved grooves, representative image for A1-447
A1-152 Girodisc 2pc Front Brake Rotors for Audi TT RS (380mm) $1,200.00
Audi TT RS (8J) Front Rotors The Girodisc Front Rotors for the Audi TT RS (8J) are engineered to deliver superior braking performance and reduced weight compared to the factory setup. Designed as a direct replacement for the OEM rotors, this lightweight two-piece system improves stopping consistency, acceleration, and suspension response without altering factory brake balance or ABS calibration. Lightweight Direct Replacement Rotors The Girodisc system bolts directly to your Audi TT RS without any modifications. By replacing the heavy factory rotors with high-performance two-piece units, you retain the car’s stock brake bias and ABS efficiency while enjoying reduced rotational and unsprung mass. Each Girodisc front rotor weighs approximately 19.8 lbs compared to 26.6 lbs for the OEM version — saving nearly 7 lbs per corner for sharper handling and quicker throttle response. Vehicle Fitment These Girodisc Front Rotors are designed specifically for: Audi TT RS (8J) — All model years equipped with OEM front brakes Features The central hat section is crafted from U.S.-sourced 6061-T6 aircraft-grade aluminum for strength and lightness. The rotor rings are made from Girodisc’s proprietary cast iron, poured and precision-machined entirely in-house in the USA. Each disc uses a curved vane design developed through motorsport testing to act as a centrifugal pump, drawing cooling air through the rotor to lower temperatures and reduce fade. The floating mount system connects the rotor ring to the aluminum hat using 8 or 10 high-strength alloy steel drive pins, cadmium plated for corrosion resistance. These pins are secured with grade 12 cap screws and hardened washers for maximum durability. Anti-noise spring washers allow for thermal expansion while eliminating rattle, ensuring smooth, quiet operation both on the street and track. The floating design also allows the rotor to self-center between pads, maintaining consistent brake feel under all conditions. Once installed, the Girodisc system makes future maintenance simple — only the cast iron rotor rings need replacement when worn, while the aluminum hats can be reused for years of service. FAQs: Audi TT RS (8J) Front Rotors Do these rotors fit my Audi TT RS without modifications? Yes, the Girodisc system is a direct bolt-on replacement for OEM rotors and works perfectly with factory calipers. How much lighter are these than stock? Each Girodisc rotor is approximately 7 lbs lighter per corner than the OEM rotors, improving acceleration and suspension performance. Are these suitable for track use? Absolutely. The Girodisc rotors are engineered to withstand high temperatures and repeated heavy braking while maintaining excellent pedal feel and durability. What makes the Girodisc rotors different from other aftermarket options? Girodisc rotors are fully machined in the USA from proprietary cast iron and use aircraft-grade aluminum hats for optimal strength-to-weight ratio and long-term reliability. Do I need to change my brake pads? You can continue using your factory pad shape or upgrade to high-performance compounds — Girodisc rotors are compatible with all OEM-spec pads. Upgrade your Audi TT RS braking system with Girodisc Front Rotors and experience lighter, stronger, and more consistent stopping performance engineered for both street and track use.
GiroDisc brake rotor with curved grooves, representative image for A1-447
A1-007 Girodisc Subaru WRX STI (2004–2017) Front Rotors $995.00
Girodisc Subaru WRX STI (2004–2017) Front Rotors The Girodisc system is a direct replacement for the OEM front rotors on the 2004–2017 Subaru WRX STI. Weighing only 16.6 lbs per rotor, these lightweight 2-piece assemblies dramatically reduce unsprung and rotational mass, improving steering response, acceleration, and suspension control. Designed for both high-performance street use and demanding track conditions, the Girodisc system maintains factory brake bias and ABS functionality while delivering improved cooling and endurance. Precision Engineering The rotor rings are machined from Girodisc’s proprietary high-carbon iron alloy, poured and processed entirely in-house in Bellingham, Washington. This advanced metallurgy ensures superior thermal stability and wear resistance under extreme braking conditions. The 30 curved vanes act as centrifugal pumps, drawing air through the hub to enhance rotor cooling during high-load track sessions. Features Direct bolt-on replacement for OEM front rotors – no modifications required Lightweight two-piece floating design reduces unsprung weight Proprietary high-carbon iron rings ensure consistent performance and long life 6061-T6 aluminum hat, hard anodized for durability Floating hardware with spring clips and Belleville washers for quiet operation Curved vane internal design maximizes air flow and cooling Fully rebuildable – replace iron rings while reusing the hats and hardware Manufactured entirely in the USA using domestically sourced materials Vehicle Fitment Subaru WRX STI (2004–2017) Technical Specifications Part Number: A1-007 Position: Front Diameter: 326mm Thickness: 30mm Weight: 16.6 lbs per rotor Rotor Type: Two-piece floating Hat Material: 6061-T6 aluminum (black anodized) Disc Material: Proprietary high-carbon cast iron Vane Design: 30 curved directional vanes Drive Pins: High-strength steel alloy, cadmium-plated Sold/Price: Per pair FAQs for Girodisc A1-007 Are these a direct fit for my Subaru WRX STI? Yes. They bolt directly onto all 2004–2017 Subaru WRX STI models with factory calipers and require no additional hardware. Can I reuse the aluminum hats? Yes. The Girodisc system is fully rebuildable—only the iron rotor rings need to be replaced when worn. Will they make noise on the street? No. The included Belleville washers and spring clips eliminate the rattles commonly associated with floating rotors. Are these suitable for track days? Absolutely. Girodisc rotors are engineered for heavy braking, offering superior heat resistance, minimal fade, and consistent performance on the track. Upgrade your Subaru WRX STI with Girodisc’s precision-engineered floating front rotors—built to deliver race-proven performance, reduced weight, and uncompromising stopping power.
Girodisc replacement rotor rings
D1-103 Girodisc Porsche 964, 993 Front Replacement Rings $820.00
D1-103 Girodisc Porsche 964, 993 Front Replacement Rings Restore classic Porsche braking precision with Girodisc D1-103 322mm front replacement rings. These performance-engineered rotors bolt directly to your existing Girodisc aluminum hats using the included floating hardware kit. Machined from Girodisc’s proprietary high-carbon cast iron, they provide superior heat management, reduced fade, and consistent pedal feel — ideal for spirited road driving or vintage racing applications. Vehicle Fitment Compatible with:• Porsche 964 Carrera 2 / Carrera 4 (1989–1994)• Porsche 993 Carrera / Carrera S / Carrera 4S (1995–1998)Note: Designed exclusively for Girodisc 322mm two-piece front rotor systems. Not compatible with OEM one-piece or carbon-ceramic discs. Features • Sold as a left/right pair with full floating hardware kit• Direct replacements for Girodisc 322mm two-piece front rotors• CNC-machined from high-carbon cast iron for exceptional thermal stability• Directional curved vanes promote airflow and reduce heat buildup• Maintains factory brake balance, ABS, and stability control calibration• Precision-balanced for smooth, vibration-free performance• Designed exclusively for Girodisc aluminum hats Specifications • Diameter: 322 mm• Position: Front• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rotor rings and complete hardware kit• Sold/priced per pair Girodisc D1-103 Porsche 964, 993 Front Ring FAQs Will these fit OEM Porsche rotor hats? No. The D1-103 rings are designed exclusively for Girodisc aluminum hats and cannot mount to factory one-piece or carbon-ceramic systems. What pad compounds are recommended? For dual street/track driving, Pagid RS29 or Ferodo DS2500 offer excellent performance. For full racing, Pagid RSL1 or Endless ME20 provide consistent friction and heat control. Do these rotors improve cooling compared to OEM? Yes. The directional curved vane design channels air through the disc for more efficient cooling, reducing fade during repeated hard stops. What torque should be used for hardware installation? Torque each bolt to 12 ft-lbs (16 Nm) using blue Loctite, and verify torque after one complete heat cycle for proper float and safety. Upgrade your air-cooled Porsche’s braking system with Girodisc D1-103 322mm front replacement rings — precision-built for balance, durability, and consistent stopping power on road or track.
Pagid racing brakes pad shape no. 4906
Girodisc GP-Series Pads No. 1001 (Rear) from $490.00
Girodisc GP-Series Pads No. 1001 (Rear) The Girodisc GP-Series No. 1001 rear pad family delivers precise fitment and confident braking for Porsche 981, 718, and 991 Carrera models equipped with iron rotors. Available in GP10 street, GP35 all-around race, and GP40 sprint race compounds, these pads allow drivers to match braking performance to their driving style—whether that’s daily commuting, frequent HPDE events, or aggressive track use. Fits the Following Vehicles: Make Model Years Front Rear Porsche 981 Cayman / Boxster 2013–2016 X Porsche 718 Cayman / Boxster 2017–Present X Porsche 991.1 Carrera (Base, S, 4, 4S) 2012–2016 X Porsche 991.2 Carrera (Base, S, 4, 4S) 2017–2019 X Features Multiple compound options to match street, HPDE, and sprint racing use Direct-fit 1001 pad shape for OEM Porsche rear calipers Smooth and predictable torque delivery for confident modulation Designed for consistent braking performance on iron rotors Sold and priced per rear axle set Compound Overview GP10 Street Pads for 1001 Shape – GP10-1001.15Designed for performance-minded drivers, GP10 semi-metallic pads balance daily drivability with the ability to handle occasional track sessions. They offer reduced noise and dust compared to full race pads while maintaining responsive pedal feel and consistent stopping power when speeds increase. For frequent or extended track use, Girodisc recommends moving to a dedicated race compound for improved heat capacity. GP35 Race Pads for 1001 Shape – GP35-1001.15GP35 is the all-around race compound that blends sprint-level bite with endurance-style durability. It beds quickly and is designed to work cleanly with both street-car ABS and motorsport-grade ABS. A smooth, linear torque curve delivers excellent modulation and release under trail braking, making GP35 a popular choice for advanced HPDE drivers and cars competing in a wide range of racing environments. Compatible only with iron rotors. GP40 Sprint Race Pads for 1001 Shape – GP40-1001.15GP40 offers strong race-ready bite without excessive rotor wear, sitting between a pure sprint and endurance formulation. It maintains pedal feel and heat stability during intense lapping sessions and has been proven in demanding race conditions. GP40 is ideal for drivers seeking aggressive braking performance with controlled wear characteristics. Specifications Pad Shape: 1001 Position: Rear Available Compounds: GP10 performance street, GP35 all-around race, GP40 sprint race Thickness: 15 mm (1001.15 specification) Rotor Type: Iron rotors only Sold as one rear axle set Girodisc GP-Series 1001 Pad FAQs Is GP10 suitable for daily driving? Yes. GP10 is designed for street use with reduced noise and dust while allowing occasional track sessions without sacrificing pedal feel. When should I choose GP35? GP35 is the right choice for frequent HPDE or club racing where a single compound needs to handle a wide range of conditions with strong bite and excellent modulation. Who is GP40 intended for? GP40 is ideal for aggressive track drivers and sprint-race applications requiring higher friction and strong initial bite while keeping rotor wear manageable. Are these pads compatible with carbon-ceramic rotors? No. All GP10, GP35, and GP40 1001 pads are designed exclusively for iron rotors and should not be used with carbon-ceramic systems. Do these pads work with factory ABS systems? Yes. All compounds in the 1001 series are formulated to function properly with OEM ABS and stability-control systems when correctly bedded. Upgrade your Porsche with Girodisc GP-Series 1001 pads and choose the compound that matches how you drive—whether that means quiet street comfort, versatile all-around performance, or sprint-race capability.
PFC-PERFORMACNE-FRICTION_BRAKE-PAD-1469-SHAPE-IMAGE
Girodisc GP-Series Pads GP35 No. 1469 (Rear) $490.00
Girodisc GP-Series Rear Brake Pads 1469 The Girodisc GP35 compound offers a versatile race-ready pad engineered for drivers who demand confident, repeatable braking on the track. Designed for the rear axle of BMW G8X chassis vehicles, these pads deliver smooth modulation, strong heat stability, and predictable release characteristics under heavy braking conditions. They work seamlessly with both factory ABS and motorsport ABS systems, making them a proven choice for advanced drivers and competitive track use. Fits the Following Vehicles: Make Model Years Front Rear BMW G80 M3 2021–Present X BMW G82 M4 2021–Present X BMW G83 M4 Convertible 2021–Present X BMW G87 M2 2023–Present X Features • Designed for dedicated track use with stable high-temperature performance• Smooth and linear torque curve for excellent modulation and release• Works effectively with performance street tires, R-compound tires, and race slicks• Consistent pedal feel during extended lapping sessions• Precision cut to pad shape 1469 for direct rear fitment• Sold/priced per axle set Specifications • Pad Shape: 1469• Position: Rear• Compound: GP35 race formulation• Rotor Type: Iron rotors only• Compatible Systems: OEM BMW G8X rear iron rotor braking systems• Sold/priced as one pair (one axle set) Girodisc GP-Series Pad FAQs Can these pads be used with carbon-ceramic rotors? No. The GP35 compound is designed exclusively for iron rotors and is not compatible with CCB systems. Are these pads suitable for street use? They can be driven on the street but are optimized for track conditions. Some noise or dust is expected during low-speed or cold operation. Do these work with factory ABS? Yes. The GP35 compound is designed to work cleanly with both OEM ABS and motorsport ABS systems. What type of track driving are these intended for? GP35 pads are a balanced compound suitable for sprint races, advanced HPDE, and general track competition where consistent braking and easy modulation are critical.
Sold out
Technical drawing of a Pagid 8214 brake pad with dimensions labeled
Pagid 8214 Racing Brake Pads $400.80
Pagid Racing Brake Pad Shape 8214 Pagid 8214 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Lotus Evora 3.5 2010 - 15      X Lotus Evora 3.5 S (supercharged) 2010 - 14      X Lotus Exige V6 Sport 350 2016 - 19      X Fits the Following Calipers: Make Type Remarks Shape No. AP Racing CP6627 D51 16.7 mm 8214 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
Pagid racing brake pads shape no. 4122 historic racing Porsche, BMW, Alfa Romeo
Pagid 4122 Racing Brake Pads from $240.26
Pagid Racing Brake Pad Shape 4122 Pagid 4122 Racing Brake Fitment Guide Make Model Build (Year) Front Rear Alfa Romeo Giulia 1.3/1.6 1966 - 76 X Alfa Romeo Sprint GT 1600 1963 - 66 X BMW 3.0 CSL [E9] 1971 - 75 X Porsche 356 1.6 C/SC 1963 - 66 X Porsche 904 Carrera GTS & 904/6 1963 - 65 X Porsche 911 2.0 M-Calipers 1965 - 69 X Porsche 912 1965 - 70 X Porsche 914/4 1970 - 72 X Saab 99 1967 - 74 X   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSH 42 Historic Compound The characteristics of Pagid RSH 42 make this material appropriate for small formula cars. Furthermore you can use it as rear axle compound in combination with the RSH 29E on the front axle. An excellent classic rally pad which is also very popular in small formula cars. RSH 29E Compound The RSH 29E is excellent for endurance racing with historic cars. It convinces with its long pad and disc life and requires less pedal effort during the race. A further advantage is the constant friction level over a wide range of temperatures. Typical applications are GT and touring cars in endurance races. Due to its friction level, you can use it in sprint races as well.
PFC_Brake_Pad_7690_Shape_Image
Performance Friction PFC 7690 Brake Pads $419.07
PFC Brake Pads 7690.332.16.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. The folks at PFC take pride in the accomplishments of the drivers and race teams that run PFC products. With More Championships than Any Other™, PFC are among the best racing brakes on the market. Known around the globe in the sports car market, PFC is involved with numerous sports car events including: IMSA Continental Tire Sports Car Challenge Porsche Cup Racing Pirelli World Challenge PFC 7690 Fitments: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brake caliper with RBD cast iron disc ] 11 -19 X Porsche 991 3.4 Carrera [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S [ceramic brake caliper with RBD cast iron disc] 11 -19 X Porsche 991 3.8 Carrera S [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S / GTS [iron brakes] 11 - 15 X Porsche 991.2 3.0 Carrera [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 15 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 17 - 19 X Porsche 992 3.0 Carrera [iron brakes] 20 -  X Porsche 992 3.0 Carrera S [iron brakes] 20 -  X Porsche 992 3.0 Carrera 4S [iron brakes] 20 -  X With over 35 years of friction knowledge and on-track experience, PFC's process enables them to provide you with the proper friction every time. No Compromises All PFC pad compounds have been thoroughly processed and are “race ready”. That means very easy burnishing to bed pads and rotors. PFC 332 Compound PFC 332 has been formulated with lower bite and torque for rear brake applications. With a smooth release, the PFC 332 compound offers excellent stability and control. PFC 332 has been designed to work with ABS applications and has exceptionally low wear rates.
Pagid 1607 Brake pad Technical drawing of a brake pad with dimensions labeled
Pagid Racing 1607 Brake Pads from $439.65
Pagid Racing Brake Pad Shape 1607 Pagid Racing 1607 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Aston Martin Vantage V8 GT4 ProDrive [race car] Alcon calipers 2018 - X McLaren 570S GT4 [race car] Alcon calipers 2018 - X Fits the Following Calipers Make Type Remarks Shape No. Alcon B type [4441] 16mm, 18mm, 20mm, 22mm, 25mm 1595, 1607, 1674, 8037, 8267 Brembo 07.5139 [type 132 or B13 family] 16mm, 20mm, 22mm, 25mm, 26.5mm, 29mm 1595, 1607, 1674, 2704, 8037, 8191 Wilwood GT 4000 20mm 1607   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid Racing 1607 Brake Pad RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid Racing 1607 Brake Pad RSL 19 Compound Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid Racing 1607 Brake Pad RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid Racing 1607 Brake Pad RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid Racing 1607 Brake Pad RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid Racing 1607 Brake Pad RST 4 Compound RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.
pagid racing brake pad shape 1595 image
Pagid Racing 1595 Brake Pads (Rear) from $408.48
Pagid Racing Brake Pad Shape 1595 Pagid Racing 1595 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Ferrari 360 Challenge 99 - 05 X Ford Fiesta R2 Tarmac Rally Spec 2016 15 - X Toyota GT86 2.0 GT R3 Rally 15 - X Fits the Following Calipers: Make Type Pad Thickness Shape No. Alcon B type [4441] 16mm, 18mm, 20mm, 22mm, 25mm 1595, 1607, 1674, 8037, 8267 Alcon R5 16mm 1595 Brembo 07.5139. [type 132 or B13 family] 16mm, 20mm, 22mm, 25mm, 26.5mm, 29mm 1595, 1607, 1674, 2704, 8037, 8191 Coleman Series III 16mm 1595   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid Racing 1595 Brake Pad RSL 29 Compound The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid Racing 1595 Brake Pad RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid Racing 1595 Brake Pad RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid Racing 1595 Brake Pad RST 3 Compound RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid Racing 1595 Brake Pad RST 4 Compound RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.
Sold out
pagid-racing-brakes-pad-shape-8287_Image
Pagid 8287 Racing Brake Pads from $473.80
Pagid Racing Brake Pad Shape 8287 Pagid 8287 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Porsche 992 GT3 Cup 2021 + X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 19 Compound Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RST D1 Compound Pagid RST D1 is especially for race cars with high aerodynamic downforce levels and with a wide brake balance range. Specifically developed for rear axle applications. The RST D1 compound provides benefits in terms of vehicle stability during the turn-in and corner-exit unloading of the front axle.
American Express Apple Pay Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Visa