Search results for "aim":

AiM Sports Solo2 Direct Power Cable 5-Pin 712 Male Add this direct power cable to your vehicle and never worry about charging your AiM Solo2 before or during an event again. This cable allows you to cleanly hard-wire your Solo2 to your car’s 12 VDC power system, keeping your lap timer and data logger powered continuously without relying on a cigarette lighter or external battery packs. Permanent Power for Your Solo2 Data Logger The AiM Sports Solo2 Direct Power Cable is designed for drivers who want a clean, reliable installation. By connecting directly to your vehicle’s 12-volt system, the Solo2 stays powered anytime the car is on, ensuring uninterrupted data logging during track days, autocross, or race sessions. Key Features 5-pin 712 male connector compatible with AiM Solo2 devices Direct-wire connection to vehicle 12 VDC power Eliminates the need for cigarette lighter charging cables Prevents mid-session battery loss or shutdowns Clean, professional installation for race or track cars Compatibility Designed specifically for the AiM Solo2 lap timer and data logger using a 5-pin 712 male connector. AiM Sports Solo2 Direct Power Cable FAQs Does this cable eliminate the need to charge my Solo2? Yes. Once installed, the Solo2 receives power directly from the vehicle, so charging before or during events is no longer necessary. Can this be installed in a street car? Yes. The cable can be installed in both street and track cars as long as a 12 VDC power source is available. Does this cable turn the Solo2 on and off automatically? The Solo2 will receive power whenever the vehicle’s electrical system is active, depending on how the cable is wired. Is professional installation required? Professional installation is recommended for the cleanest and safest wiring, but experienced DIY installers can also handle the installation. If you’re tired of charging cables, dead batteries, or unreliable power during events, this direct power solution keeps your AiM Solo2 ready every time you hit the track.

AiM SmartyCam HD Suction Mount This adjustable mount holds your AiM SmartyCam securely to your windshield or any other smooth, flat surface. Allows you to quickly mount your camera and keeping it pointed in the right direction during track days and other racing events. Two pivoting ball joints allow a wide range of adjustment and the 3 1/2" diameter, lever-actuated suction cup base mounts incredibly securely. What's In The Box? Suction cup Clamp base with ball (screws provided) 60mm single clamp arm Ball head with threaded stud Ridged washer Note: not for use with AiM SmartyCam bullet/lipstick cameras.

AiM Sports SmartyCam External Power Cable If you're not powering your AiM SmartyCam by connecting it to a Solo2 DL or an AiM Sports Dash, you'll need this external power cable in order to provide enough juice for your SmartyCam to record every session. Installation is quick and easy. Two meters (6.6 feet) in length. Note: Cable typically takes 3 to 5 business days to ship.

The Full-Size Color TFT Dash For Road Use The AiM Sports MXP Strada is a 6" color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and - optionally - the GPS09 Module. Integrated LED Shift Light Array Choose from a host of advanced multicolored RGB shift light patterns that can be customized as you like, and for each unique gear when required. Input and Output Flexibility AiM systems acquire data from the ECU of your vehicle.The list of available ECU drivers, constantly updated and upgraded, includes 1,000 + different ECUs, either Stock and Racing; they are sorted by manufacturer/vehicle model: for each ECU you find the proprietary communication protocols, including the standard OBDII ones. From a hardware point of view, AiM systems manage the following data lines: CAN, RS232 and K-Line. Analog/digital inputs AiM systems analog inputs are recorded up to 1,000 times per second each. You can connect and monitor all kinds of sensors, like: Ratiometric potentiometers Pressure sensors Thermo-resistors K-type thermocouples ... and many others, all your custom sensors included. Freely Configurable Display Pages You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managed pushing one or two pushbuttons. High Contrast Color TFT Display A high contrast TFT display identifies MXP Strada at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels. Flexible Alarms and Custom Street Icons MXP Strada, in its standard version, features five configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons. AiM MXP Digital Inputs Speed signals From the ECU, from the GPS and from the wheel sensors. RPM From the ECU or from a digital input connected to a square wave signal (8 to 50 V) or to a low voltage (from 150 to 400 V) of the coil. Lap signal Lap and split times are sampled by the GPS or via optical receiver/transmitter. Camera Inputs Including Rearview Mirror Camera Two analog camera inputs are available, to swap your display into a mirror camera,through pushbutton command or event management. Digital Output MXP Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU. This permits to automatically run externalsystems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certainevent happens. Race Studio 3 Analysis Software MXP 1.3 Strada is configured using your PC and Race Studio 3. You can create, customize, delete, import and export configurations with all channels, ECU drivers, Math Channels, Display Pages, Digital Output, Alarms, Shift Lights and all the expansions you need. AiM MXP 1.3 Strada Details 9.3" x 5.0" x 1.0" Anodized Aluminum housing Large 7.0" high-contrast color TFT display 800x480 pixel screen resolution Weight 2.1 lbs (950g) Waterproof IP65 AiM MXP 1.3 Strada Kit MXP 1.3 Strada digital dash USB cable 14-pin standard wiring 23-pin connector + contacts Installation CD with Race Studio 3 software All sensors and modules sold separately.

AiM Patch Cable With Microphone AiM CAN patch cable with integrated external microphone to connect any supported AiM data-logger to a SmartyCam HD Rev 2.1 / SmartyCam GP HD Rev 2.1. Not compatible with SmartyCam GP HD Rev 2.2. AiM CAN Patch Cable Details Manufacturer: AiM Sports Manufacturer part no.: V02566240 Length: 4 meters (13.1 feet) Connectors: 7-pin 712 male to 5-pin 712 male

AiM Sports SmartyCam Bullet Camera Roll Bar Mount This strong, adjustable mount holds your AiM SmartyCam bullet camera securely to your roll bar or harness bar. Two pivoting ball joints give you lots of adjustment, keeping it pointed in the right direction during races and track days. The cast aluminum base and stainless steel clamp create a solid base for this heavy-duty mount. What's In The Box? Cast aluminum lower mount Jubilee clamp 60mm (2.4 inch) single clamp arm Ball head with 1/4-20 threaded stud Ridged lock washer

AiM Sports 712 to 719 Four-Pin Patch Cables Add the appropriate AiM Sports 712 to 719 4-Pin Extension Cables to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level! The AiM Sports 712 to 719 4-Pin Patch Cables have a female 4-pin 719 (plastic) connector at one end and a male 4-pin 712 (threaded) connector at the other to connect most analog automotive sensors to the MyChron3, XG-Log Auto Dash, AiM EVO4, or AiM EVO4s Data Logger. Available in 0.5 thru 4 Meter lengths. The AiM 712 to 719 Cable is Compatible With: MyChron Expansion AiM Data Hub Channel Expansion EVO4 Logger EVO4s Logger PART NUMBERS: V02PCB05BTXG – cable length: 0.5 meter (1.6 ft) V02PCB10BTXG – cable length: 1 meter (3.3 ft) V02PCB15BTXG – cable length: 1.5 meter (4.9 ft) V02PCB20BTXG – cable length: 2 meters (6.6 ft) V02PCB25BTXG – cable length: 2.5 meters (8.2 ft) V02PCB30BTXG – cable length: 3 meters (9.8 ft) V02PCB35BTXG – cable length: 3.5 meters (11.5 ft) V02PCB40BTXG – cable length: 4 meters (13.1 ft) V02PCB50BTXG – cable length: 5 meters (16.4 ft) Note: Cables typically take 3 to 5 business days to ship.

719 to 3-pin 712 Adapter Cable Only for Rotax Temp Sensor This patch cable has a 719 push-on connector at one end and a 3-pin 712 screw-in connector at the other. It is only used in karting applications, usually with the Rotax engine. This is the same cable included with the AiM Rotax Water Temperature Sensor Kit (Part No. AIM-MC-040). 719 to 3-pin 712 Adapter Cable for Rotax Temp Sensor Details Manufacturer: AiM Sports Manufacturer part number: V02PCB15BTR Kart Only: Yes Cable End 1: 719 push-on Cable End 2: 3-pin 712 screw on

AiM Solo 2 DL Vehicle Power Wiring Harness Now you can power your AiM Solo2 DL for your entire endurance race without the need to charge the battery. The power cable that comes with the AiM Solo 2 in the package is set up for a cigarette lighter connection, but this is a hard wire connection for true race cars. This harness connects your AiM Solo2 DL to your vehicle's fuse box wiring. One end has a 5-pin 712 (screw-in) connector to fit the Solo, and the other has 2 non-terminated wires (Power and Ground). AiM Solo2 DL Vehicle Power Wiring Harness Details: Manufacturer: Aim Manufacturer part number: V02589020 Fits Solo DL: No Fits Solo 2 DL: Yes Fits Solo Base Model: No Fits Solo 2 Base Model: No Pins on AiM Solo Side: 7 Pin Thread on connector Vehicle Chassis Ends: 2 Non terminated wires Vehicle Chassis Ends Break Out: Power, and Ground If you are putting a Solo2 into an older vehicle and need a direct to battery/fuse box power supply cable, use this harness for an easy install.   

Aim Sports SmartyCam3, SmartyCam HD Rev. 2.1 ECU Harness Seamless ECU Connectivity for AIM SmartyCam Series Elevate your video and data logging setup with the AIM SmartyCam3, SmartyCam HD Rev. 2.1 ECU Harness. This high-quality cable is engineered to power and connect your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1, and SmartyCam GP 2.2 directly to your vehicle's ECU via its CAN bus, ensuring a seamless integration and access to a rich data set. Optimal Standalone Configuration: Designed for setups without a data logger connection, this harness includes unterminated leads for 12V, ground, CAN+, and CAN-. Enhanced Performance with GPS09 Module: For the best configuration, consider adding the GPS09 module to your system. Key Features 4m Length: Ample length for versatile installation. Camera Compatibility: SmartyCam3 Corsa (all models) SmartyCam3 GP SmartyCam HD Rev. 2.1 SmartyCam HD Rev. 2.2 (GP) Upgrade your racing setup with this AiM SmartyCam3, SmartyCam HD Rev. 2.1 ECU Harness for unparalleled data and video performance.

AiM 23-Pin MXS/MXP/MXG Strada Harness This add-on harness plugs into the 23 pin AMP connector on the AiM MXS 1.2 Strada, MXP Strada, and MXG 1.2 Strada street dashes to unlock certain dash features. If you don't want to build your own harness, this harness is required in order to use the following features: Analog input channels (8) Digital wheel speed channel (1) RPM input Digital output CAN2 stream input Manufacturer: AiM Manufacturer part number: V02573220 For use with AiM MXS 1.2 Strada (Standard and "Street Icons"), MXP Strada, and MXG 1.2 Strada only. Not for original MXS Strada, MXS/MXP/MXG data logging dashes, or any other dash or logger.

AiM Sports SmartyCam Cable For Solo2 DL / Dash Logger Have more than one vehicle with a dash or Solo2 DL? Want to make swapping your SmartyCam between vehicles easier? Grab this extra four-meter cable for your second car, route the cable as needed and leave it in place to power your SmartyCam when you drive that car. This cable takes the headache out of the process for people with more than one vehicle but only one SmartyCam.Connectors are 7-pin 712 male to 5-pin 712 male designed to fit the AiM SmartyCam HD Rev 2.1 or SmartyCam GP HD Rev 2.1. Four meters (13.1 feet) in length. Note: Cables typically take 3 to 5 business days to ship.

AiM Solo2 Vehicle Power Wiring Harness Now you can power your AiM Solo2 DL for your entire endurance race without the need to charge the battery. The power cable that comes with the AiM Solo2 DL in the package is set up for a cigarette lighter connection, but this is a hard wire connection for true race cars. This harness connects your AiM Solo2 DL to your vehicle's fuse box wiring. One end has a 5-pin 712 (screw-in) connector to fit the Solo2 DL, and the other has two non-terminated wires (Power and Ground). AiM Solo 2  Vehicle Power Wiring Harness Details Manufacturer: AiM Sports Manufacturer part number: V02589020 Pins on AiM Solo Side: 5-pin thread-on connector Vehicle Chassis Ends: two non-terminated wires (Power and Ground) If you are putting a Solo2 DL into an older vehicle and need a direct to battery/fuse box power supply cable, use this harness for an easy install. 

SmartyCam GP HD 2.2 to AiM Dash Connection Cable AiM SmartyCam GP HD 2.2 and SmartyCam HD Version 1 (Black Box Camera) replacement connection cable to connect to your Solo DL, MXS, MXG, MXP, MXL2, AiM Data Logger or SMC Bridge. This is a connection cable that has a 712 5 pin male connector on one end and another 712 5 pin male connector on the other end. SmartyCam GP HD 2.2 to AiM Dash Connection Cable Details Manufacturer: AiM Sportline Manufacturer part number: V02554820 Alternate part number: AIM-MC-267 SmartyCam GP HD 2.2 and HD to AiM Dash or Data Hubs Included with all SmartyCam HD kits Length: 4 Meters (12ft) End 1: 5 Pin Male 712 Thread-On Connector End 2: 5 Pin Male 712 Thread-On Connector These CAN cables have male 5-pin 712 (screw-in) connectors at each end to connect the AiM SmartyCam GP HD 2.2, SmartyCam HD (version 1 black box looking camera) to your Solo DL. This cable also is used to connect your AiM SmartyCam HD (version 1) to your AiM logger or SMC Bridge. Note: Not compatible with the original SmartyCam (gray unit with the viewing screen on top) or the later SmartyCam HD "Rev 2". The version 1 can be identified by a 7/8" diameter lens with either a 67 or 87 degree field of view, and a viewfinder flush with the front of the housing. Later SmartyCam HD Rev 2 had a larger 1 3/8" OD lens marked as 60 or 120 degree field of view and a cover over the front viewfinder held on by 8 screws. The original SmartyCam and SmartyCam HD Rev 2 require a CAN cable with a 7-pin connector. Although the connectors are correct, this cable can NOT be used to connect the SmartyCam HD GP bullet camera to the base recording unit, the internal wiring is different. How do I make sure I have an original SmartyCam H.D. Rev 1? First, your SmartyCam does not have any type of microphone. Second there is a 5 pin connection (for this control cable) and a 4 pin connection for GPS antenna. If you have a 4 pin and 7 pin, the you have a new Rev 2.

AiM 4 Pin 719 Female Connector AiM 4 Pin 719 Female Connector to replace or add to your AiM Data system. AiM 719 fittings are the most commonly used temperature and pressure sensor connector fittings, linear & string potentiometers and AiM extension cables. AiM 4 Pin 719 Female Connector Details Manufacturer: AiM Sports Manufacturer part number: 997647004 Pins: four Connector Type: 719 Female