Racetech

Racetech Door Pulls High-quality door pull strap mounts to an 11mm (7/16") bolt hole. Made from plyable webbing, approximately 180mm (7") long and 25mm (1") wide. We have found that these can also function well as grab handles or as keychains. Available in Red, Blue, Orange, Black, Yellow, Pink, Silver, Teal and Green with an embroidered Racetech logo. Actual colors may vary slightly from picture. Please note: Each purchase includes one door pull.

Racetech Ram Air Ducting Kit Now you can provide forced air induction to your Racetech 119 or 129 series race seat. Increase driver comfort by removing latent heat to the lower back. Especially useful in longer or enduro race events, this air-cooling maintains a level of comfort for the driver, enabling optimum performance and less heat stress and fatigue. KIT INCLUDES: 12V inline blower motor @122 CFM.  Silicone reducer (76mm to 51mm). Four-foot high-temp duct hose. Two tie wraps. For maximum cooling performance, use with NACA duct and 3” intake hose.

Racetech RT1000 Racing Seat The Racetech RT1000 racing seat meets the demands of motorsport enthusiasts who demand all the function and safety of a premium racing seat, but have no need for frills. With a total seat weight of just 8.9 kg (19.6 lbs.) and homologated to FIA 8855-1999 standards, the Racetech RT1000 racing seat makes it easy to put a professional-level racing seat in your car. The Racetech RT1000 is a great fit for smaller classic race cars. And it comes in any color you want, as long as its black! Racetech RT1000 Racing Seat Details Manufacturer: Racetech FIA homologation: 8855-1999 Gel-coat: gloss black Seat cover: black fire-retardant nylon fabric with Spacer® mesh through the torso Shell construction: fiberglass composite Shell weight: 6.6 kg (14.5 lbs)  Seat size: Standard Back mount compatible: no

Racetech RT4100 Series Racing Seats Introducing the all-new Racetech 4100 Series racing seats! The RT4100 is a standard-sized fiberglass race seat. Racetech focused on achieving a lightweight seat shell with optimized geometry, straddling the line between designing the seat to be wide enough in the shoulders to suit the athletic build, but narrow enough to fit in most cockpits. The Racetech 4100 Series patented back-mounted technology has trickled down from the 119 and 129 Series, giving you the option of fixing the seat to the roll bar or cage at shoulder level. The large harness guides and a removable molded base cushion of the Racetech RT4100 Series racing seats allow a range of drivers of varying heights to fit. Breathable Spacer® fabric, parallel sides and pronounced thigh support round off the features of this accomplished motorsport seat. Racetech RT4100 Racing Seat Options RT4100: Standard size, FIA approved RT4100T: Tall size, FIA approved RT4100WT: Wide & tall size, FIA approved All 4100 Series seats use Racetech RTB1009M alloy side mounting brackets (can be added separately). Racetech RT4100 Racing Seat Details Manufacturer: Racetech FIA homologation: 8855-1999 Seat sizes: Standard, Tall (T), or Wide & Tall (WT) Shell weight: 5.7kg (12.5 lbs) to 6.0kg (13.2 lbs) Shell construction: fiberglass composite Gel-coat: gloss black Seat covering: black fire-retardant nylon fabric with Spacer® mesh through the torso Back-mount compatible: yes

Racetech RT4100 Series Racing Seat 2027 Expiry The Racetech RT4100 is a standard-sized fiberglass race seat. Racetech focused on achieving a lightweight seat shell with optimized geometry, straddling the line between designing the seat to be wide enough in the shoulders to suit the athletic build, but narrow enough to fit in most cockpits. The Racetech 4100 Series patented back-mounted technology has trickled down from the 119 and 129 Series, giving you the option of fixing the seat to the roll bar or cage at shoulder level. The large harness guides and a removable molded base cushion of the Racetech RT4100 Series racing seats allow a range of drivers of varying heights to fit. Breathable Spacer® fabric, parallel sides and pronounced thigh support round off the features of this accomplished motorsport seat. Racetech RT4100 (2027 Expiry) Racing Seat Options RT4100: Standard size, FIA approved RT4100WT: Wide & tall size, FIA approved All 4100 Series seats use Racetech RTB1009M alloy side mounting brackets (can be added separately). Racetech RT4100 Racing Seat Details Manufacturer: Racetech FIA homologation: 8855-1999 Expiration: 2028 Seat sizes: Standard or Wide & Tall (WT) Shell weight: 5.7kg (12.5 lbs) to 6.0kg (13.2 lbs) Shell construction: fiberglass composite Gel-coat: gloss black Seat covering: black fire-retardant nylon fabric with Spacer® mesh through the torso Back-mount compatible: yes

Racetech RT4100 Series Racing Seat 2028 Expiry The Racetech RT4100 is a standard-sized fiberglass race seat. Racetech focused on achieving a lightweight seat shell with optimized geometry, straddling the line between designing the seat to be wide enough in the shoulders to suit the athletic build, but narrow enough to fit in most cockpits. The Racetech 4100 Series patented back-mounted technology has trickled down from the 119 and 129 Series, giving you the option of fixing the seat to the roll bar or cage at shoulder level. The large harness guides and a removable molded base cushion of the Racetech RT4100 Series racing seats allow a range of drivers of varying heights to fit. Breathable Spacer® fabric, parallel sides and pronounced thigh support round off the features of this accomplished motorsport seat. Racetech RT4100 (2028 Expiry) Racing Seat Options RT4100: Standard size, FIA approved RT4100WT: Wide & tall size, FIA approved All 4100 Series seats use Racetech RTB1009M alloy side mounting brackets (can be added separately). Racetech RT4100 Racing Seat Details Manufacturer: Racetech FIA homologation: 8855-1999 Expiration: 2028 Seat sizes: Standard or Wide & Tall (WT) Shell weight: 5.7kg (12.5 lbs) to 6.0kg (13.2 lbs) Shell construction: fiberglass composite Gel-coat: gloss black Seat covering: black fire-retardant nylon fabric with Spacer® mesh through the torso Back-mount compatible: yes

Racetech RT4100HR Racing Seats Announcing the all new Racetech 4100HR Series racing seats with head restraints! The RT4100HR is a standard-sized fiberglass race seat equipped with head restraint wings for enhanced safety. The Racetech 4100HR Series is focused on achieving a lightweight seat shell with optimized geometry, straddling the line between a seat wide enough in the shoulders to suit an athletic build, but narrow enough to fit in most cockpits. Racetech's patented back-mount technology has migrated down from the 119- and 129-Series, giving you the option of fixing the seat to your roll cage at shoulder level. Large harness guides and a removable molded base cushion allow a range of drivers of varying heights to fit comfortably. Breathable Spacer® fabric, parallel sides, and pronounced thigh support round out the features of this accomplished motorsport seat. For the larger driver, the RT4100WTHR is 6cm taller and 4cm wider than the Standard size. For those wanting a seat without head restraints, check out the Racetech RT4100 and RT4100WT. All Racetech 4100 Series seats use Racetech RTB1009M alloy side mounting brackets. Racetech RT4100HR Racing Seat Details Manufacturer: Racetech FIA homologation: 8855-1999 Seat sizes: Standard, Tall (T), or Wide & Tall (WT) Shell construction: fiberglass composite Shell weight: 6.1 kg (13.4 lbs) to 6.6 kg (14.5 lbs) Gel-coat: gloss black Seat cover: black fire-retardant nylon fabric with Spacer® mesh through the torso Back-mount compatible: yes Racetech RT4100HR Racing Seat Options RT4100HR: Standard size, head restraints, FIA approved RT4100THR: Tall size, head restraints, FIA approved RT4100WTHR: Wide & tall size, head restraints, FIA approved All Racetech 4100 Series seats use Racetech RTB1009M alloy side mounting brackets (can be added separately)

Racetech RT4119HR Head Restraint Racing Seat Building upon the successful 129-Series, the Racetech RT4119HR Series of head restraint equipped racing seats offer the same ergonomic form and incredible features in a lighter and more affordable package. The Racetech RT4119HR is used by many professional teams at both the national and international levels. There are four sizes available: Standard, Wide, Tall, and Wide & Tall. Customize your Racetech RT4119HR racing seat further by adding low-profile base cushions, or add side cushions for support in the thigh area. The Racetech RT4119 Series seats are compliant with FIA 8855-1999 standards.1 Racetech RT4119HR Racing Seat Details Manufacturer: Racetech Homologation: FIA 8855-1999 Shell construction: Glass Reinforced Plastic (GRP) composite Shell weight: 7.6 kg (16.7 lbs) to 8.3 kg (18.3 lbs) Back-mount compatible: yes Large harness guides Air ducting vented to the driver's lower back Racetech RT4119HR Racing Seat Options RT4119HRW: Standard size, FIA approved RT4119THR: Tall size, FIA approved RT4119WHR: Wide size, FIA approved RT4119WTHR: Wide & tall size, FIA approved Side mounts: Racetech RTB1009M aluminum brackets Back mount:2 RTB2115B bracket + RTB2005C clamps 1 Note: to comply with FIA 8855-1999, all RT4119HR racing seats except the RT4119HRW must be back-mounted to the roll cage at shoulder level. For back mounting, see instructions here. 2 Back-mounting improves seat strength and stability during an impact, increases driver feel and reduces driver fatigue. Check out this video for more great info.

Racetech RT4119W Racing Seat Racetech took their most popular racing seats and gave them a chop! The RT4119W (Wide) and RT4119WT (Wide & Tall) seats are based on Racetech's popular RT4119WHR and RT4119WTHR, but without the head restraints for improved visibility and access in track-day type vehicles. The Racetech RT4119W and RT4119WT racing seats retain Racetech's unique, patented back mount design to give the driver ultimate support and feel for the chassis not available in basic floor-mounted seats. Customize your Racetech racing seat further with low-height base cushions or side cushions for support in the thigh area. The Ideal Racing Seat for Track Days The Racetech RT4119W and RT4119WT racing seats are not FIA homologated. They do not include an air ducting spigot, but when it gets hot in your Porsche or Pro Touring Camaro, you're just going to turn on your air-conditioning, right? Ideal for HPDE/DE track cars, off-road desert trucks & outlaw drag cars when drivers can't use a head restraint seat. Brackets And Mounting Options Side mount: Racetech RTB1009M 5mm aluminum brackets Back mount:1 Racetech RTB2115B + RTB2005C Racetech RT4119W Racing Seat Details Manufacturer: Racetech FIA Homologation: not FIA approved Gel-coat: gloss black Seat cover: black fire-retardant fabric Wear patches: black perforated leather Shell construction: Glass-Reinforced Plastic composite (GRP) Shell weight: from 7.0 kg (15.5 lbs) Seat sizes: Wide (W) or Wide & Tall (WT) Air Ducting: none Back-mount compatible: yes 1 The Racetech RTB2115B is a 5mm aluminum bracket that bolts directly to the shoulder beam of the seat. The RTB2005C clamps to the RTB2115B (once holes have been drilled) and comes in three variants: 1-1/2" (38mm), 1-5/8" (41mm) or 1-3/4" (45mm) inside diameter to suit your roll cage or roll bar tubing diameter.

Racetech RT9119 Lightweight Racing Seat Building on the success of Racetech's 129 Series racing seats, the Racetech RT9119 racing seat offers the same ergonomic form and incredible features in a lighter, more protective package. Used by many professional race teams at both the national and international levels, this is the lightweight version using a precise combination of Carbon and Kevlar hybrid weave to achieve a shell weight as low as 9.9 lbs. (4.5 kg). The Racetech RT9119 is available in four shell sizes: Standard, Wide, Tall, and Wide & Tall. You can further customize your seat with low-profile base cushions or by adding side cushions for support in the thigh area. The Racetech RT9119 racing seat complies with FIA 8855-1999 standards.1 Racetech RT9119 Racing Seat Details Manufacturer: Racetech Gel-coat: clear finish Seat cover: black fire-retardant fabric FIA homologation: FIA 8855-1999 Shell construction: carbon/kevlar hybrid weave Shell weight: 4.5 kg (9.9 lbs) to 4.9 kg (10.8 lbs) Anti-abrasion patches in black perforated leather Integrated air ducting vented to the driver's lower back Back mount compatible (must be back mounted for FIA compliance) Racetech RT9119 Racing Seat Options RT9119HRW: Standard size, FIA approved RT9119THR: Tall size, FIA approved RT9119WTHR: Wide & tall size, FIA approved Racetech RTB1009M (side mount) Racetech RTB2115B + RTB2005C (back mount)1 1 Note: to comply with FIA 8855-1999, this Racetech seat must be back mounted to the roll cage at shoulder level. Back mounting instructions can be found here.    

Racetech RT1005M Aluminum Side Mounts Light Weight and Strong Racing Seat Side Brackets Racetech milled aluminum alloy bracket set for side-mounting seats to your car floor or chassis. CNC machined from from strong, lightweight 5mm thick 5083 aluminum alloy. Sold as a pair. Racetech RT1005M Brackets Fit the Following Seats: RT1000 RT4000W (discontinued) RT4000WX (discontinued) RT Saker (with modification) RT Road RT RoadW (discontinued) RT4000WLB RT4000WXLB RT1000LBHG Racetech RT1005M Specs and Details: Weight: 2.52 lbs (1.14 kg) per pair Materials: 5mm 5083 aluminum alloy Seat hole spacing: nominal 260mm; min 252mm; max 264mm

Racetech RT1009M Aluminum Side Mounts Lightweight and Strong Racing Seat Side Brackets Racetech mill-finish 5mm (5083 grade) aluminum brackets for side-mounting a racing seat. Five slots and five holes in each bracket provide plenty of height and tilt adjustment for the optimal driving position. Sold as a pair. Racetech RT1009M Brackets Fit the Following Seats: RT4009, RT4009W RT4009HR, RT4009THR, RT4009WHR, RT4009WTHR RT4100, RT4100WT, RT4100HR, RT4100WTHR RT4119HRW, RT4119THR, RT4119WHR, RT4119WTHR RT4129HRW, RT4129WHR, RT4129WTHR RT9009, RT9009HR RT9119HR, RT9119THR, RT9119WTHR RT9129HRW, RT9129THR, RT9129WHR, RT9129WTHRL Racetech RT1009M Specs and Details: Weight: 2.74 lbs (1.24 kg) per pair Materials: 5mm 5083 aluminum alloy Seat hole spacing: nominal 295mm; min 290mm; max 300mm

Racetech RTB2005C Seat Back Brace Clamps Racetech RTB2005C aluminum clamps for back-mounting seats. Precision cut from a 20mm-thick 5083 aluminum alloy. Sold as a pair, these clamps fit around a roll cage or roll bar tube and bolt to the Racetech RTB2115B Seat Back Brace. This allows you to effectively back-mount any Racetech 119-Series racing seat to your roll bar or roll cage at shoulder level. Supplied with two M8 bolts and two flat washers. Racetech RTB2005C Available Sizes: 1.50 inch (38.1mm) inside diameter 1.625 inch (41.3mm) inside diameter 1.75 inch (44.5mm) inside diameter

Racetech RTB2115B Seat Back Bracket The Racetech RTB2115B bracket for back-mounting seats is made from 5mm 5083 aluminum alloy. This bracket bolts to the rear shoulder section of Racetech 119-Series racing seats and works in conjunction with Racetech RTB2005C clamps. This allows you to brace your racing seat to a lateral or diagonal roll cage or roll bar tube. Four holes must be drilled into the RTB2115B bracket to accept the Racetech clamps once you have your racing seat set-up in the optimum driving position. For more info, take a look at these racing seat back-mounting instructions. Racetech RTB2115B Is Compatible With These Racetech Seats: RT4119HRW RT4119THR RT4119WHR RT4119WTHR RT9119HR RT9119THR RT9119WHR RT9119WTHR

Racetech Steel Side Mounting Brackets Racetech RTB2009S satin black powder coated 3mm steel brackets for side mounting seats. Sold as a pair. Alongside the Racetech 4100-Series seats, they have developed a classy but affordable new bracket set. A staggered hole-and-slot pattern allows fine adjustments for the optimal seating position. Slots in the foot of each bracket also allow a little more lateral tolerance during installation. Use With These Racetech Seats: RT4009, RT4009W RT4009HR, RT4009WHR, RT4009WTHR RT4100, RT4100WT, RT4100HR, RT4100WTHR RT4119HRW, RT4119THR, RT4119WHR, RT4119WTHR RT9119HRW, RT9119THR, RT9119WHR, RT9119WTHR Hole Spacing (Seat): Nominal: 295mm Minimum: 290mm Maximum: 300mm

Racetech Zinc-Plated Steel Side Mount Brackets Racetech zinc-plated, 3mm steel brackets for side-mounting seats. Sold as a pair. These brackets are suitable for use with the following seat models: RT1000 RT4000W (discontinued) RT4000WX (discontinued) RTSaker (with modification) RTRoad RTRoadW (discontinued) RT4000WLB RT4000WXLB RT1000LBHG