Auto Racing Driver Safety Gear at CMS – Page 19

Stilo S.r.l. Stilo ST5 Side Air Kit $70.00

Side Air Kit For All Stilo ST5 and ST5.1 Helmets Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. Th Stilo Side Air Kit allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet. It's especially useful in small, low cockpits where there's not enough room for a top-air kit. Must be used in conjunction with the Stilo Side Air Adapter Hose YA0639.

Chillout Systems Chillout Systems 3" Air Duct Plenum $68.00

Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system. The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED: 3" Air Duct Plenum

HANS Sport 3 Tether Kits - Competition Motorsport

HANS Performance Products HANS Sport 3 Tether Kits $84.00

HANS Sport 3 Tether Kits Ensure the safety and functionality of your HANS Sport 3 with our replacement tether kits. Designed for use with Sliding tethers and post anchors, these kits allow you to easily swap out your existing tether for a longer or shorter one. In the event of an incident, it is crucial to have a reliable and secure tether in place, and our HANS Sport 3 Tether Kits provide just that. Made with high-quality materials, these kits are built to withstand the demands of competitive motorsports. Keep your HANS Sport 3 in top condition with our reliable and durable tether kits.

Sparco S.p.A. Sparco X-Cool Recharge Kit $59.00

Sparco X-Cool Recharge Kit The easy-to-apply Sparco X-Cool Recharge Kit helps revive your Sparco fire suit or nomex underwear to it's original high-temperature performance. Simply add to your washing machine along with your performance apparel. Each kit can treat one Sparco fire suit or one complete set of Sparco Nomex underlayers (balaclava, shirt, pants, and socks). Sparco X-Cool Recharge Kit Details Manufacturer: Sparco Manufacturer part no.: 001157RECHARGE Treats: one Sparco driver fire suit OR one set of Sparco Nomex underlayers Size: 60ml (2.0 fl oz)

Stilo S.r.l. Stilo ST5 Tear Offs Thick (4 mil) $49.00

Stilo ST5 .004" Thick Tear-Off Pack Protect your Stilo ST5 helmet shield from rocks, dirt, and debris with these 4 mil (.004" or 0.1 mm) thick visor tear-offs. Measuring 4/1000ths of an inch in thickness (the most popular for open cockpit and harsh-environment racers), these tear offs are intended for road racing or dirt track use. One package of tear-offs contains in four stacks of three tear-offs. Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo 4-Mil Tear-Off Pack Details Manufacturer: Stilo Manufacturer part numbers: 3459C Thickness each: 4 mil (0.004") Tint: Clear Fits all Stilo ST5 Helmets: Yes Fits Stilo ST4F and Stilo ST4W Helmets: No Four stacks of three tear-offs (total of 12). Note: these are the thicker of tear-offs (4 mil) for your Stilo ST5 series helmets. They are used primarily in open-cockpit road racing cars, dirt track racing, and other harsh racing environments.

alpinestars-engine-pit-gloves_black/grey/yellow_imagert

Alpinestars Alpinestars Engine Pit Gloves $63.00

Alpinestars Engine Pit Gloves The Engine Glove is a hybrid multi-material glove which offer high levels of comfort and protection. Soft, lightweight and flexible, the glove has mesh panels for optimum levels of breathability, while the tough synthetic suede leather palm means it is highly durable. It’s also reassuringly protective thanks to the strategically positioned TPR on the knuckles. Another neat feature is the conductive print on the palm and fingers which allows mechanics to operate a tablet while wearing the gloves. Alpinestars Engine Pit Glove Features Advanced TPR knuckle insert offers impact protection without compromising dexterity. Ergonomic stretch insert between thumb and palm and on backhand offers flexibility to vastly improve hand movement. Sublimated, fade-resistant color on back of the hand for a distinctive look. Synthetic suede thumb reinforcement for durability and seam reinforcement. Touchscreen compatible fingertip for use with handheld devices. Short cuff styling. Alpinestars Engine Pit Glove Construction Lightweight, multi-material glove incorporating a stretch mesh and stretch fabric on the top of the hand. Stretch mesh and stretch fabric offer comfort and cooling performance. Synthetic suede palm with padding provides grip, durability and tactility. Hook and loop grip cuff closure on the back of the hand for a precise fit. Strategic 2mm foam padding on fingers for fit and comfort. Alpinestars Engine Pit Glove Size Chart

Sparco S.p.A. Sparco Meca 3 Pit Gloves $59.00

Sparco Meca 3 Pit Gloves The back of the Sparco Meca 3 pit mechanic's glove is made from elasticized, printed, scuff resistant fabric. The palms are synthetic scuff resistant hide, giving you excellent dexterity and feel with reinforcements positioned between the thumb and index finger. Pads between the fingers provide excellent breathability and comfort. The Meca 3 has a velcro wrist strap for a secure, comfortable fit. Note: these gloves are not fire- or heat-resistant, and are not for use in competition environments requiring Nomex gloves. Sparco Meca 3 Pit Glove Size Chart

Stilo S.r.l. Stilo Hydration Kit | ST5 & ST6 Helmets $62.00

Stilo ST5/ST6 Helmet Hydration Kit Hydration Bite-Valve Kit Designed Specifically for Stilo Upgrade your racing experience with the Stilo Hydration Kit, designed to keep you hydrated during intense competitions. Designed specifically for Stilo ST5 and ST6 helmets, this kit includes three essential components: the Bite Valve (YA0601), Silicone Tubing (YA0602), and Straight Male Coupling End (YA0603).1 Engineered to seamlessly integrate into the helmet and run behind the cheek pad, the quick-release connector allows for easy attachment to a variety of drink devices found on the market. Whether you're driving the ST5 FN or GT model, this hydration system ensures convenient access to refreshment without compromising performance. With the ability to fit snugly into the ST5 GT side ports or front vent of the ST5 FN helmet, this kit offers versatility and comfort. Stay focused on the track while staying hydrated with the Stilo Hydration Kit. Stilo Helmet Hydration Kit Includes: (1) Male hydration connector (YA0603) (1) Hydration tubing (YA0602) (1) Bite valve (YA0601) 1 Note: female hydration connector YA0604 is sold separately.

Stilo S.r.l. Stilo ST5 Side Air Adapter Hose $70.00

Stilo ST5 Side Air Adapter Hose Connects Standard Forced-Air To Stilo ST5 Side Air Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This adapter hose allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet. Must be used in conjunction with Stilo Side Air Kit YA0653. Stilo ST5 Side Air Adapter Hose SKU: YA0639

Stilo S.r.l. Stilo ST5 Earcup Set $49.00

Stilo ST5 Earcup Set Stilo passive noise attenuating removable earcups. Not for use with helmets equipped with built-in earcup communications. Can be used in conjunction with 3.5mm jack and in-ear buds, or without any communications installed.

FluidLogic Maglock Air Hose quick-connect for driver cooling and helmet air supply

RainMaker Solutions, Inc. Maglock Air Hose from $45.00

Maglock Air Hose Maglock Air Hose is built to exacting specifications to ensure that you get the lightest, most flexible hose on the market today. Neck fatigue during use is greatly reduced, and this hose does not unintentionally disconnect from the magnetic Maglock Air in high-G or high impact environments. Used by top motorsports athletes including all Andretti IndyCar drivers, Ricky Stenhouse Jr. (NASCAR), Ricky Johnson (TT), and Guy Cosmo (IMSA). We highly recommend this hose being paired with the Maglock Air Hose-Side Connector (sold separately).

Chillout Systems 1.5 Liter Coolant Formula - Competition Motorsport

Chillout Systems Chillout Systems 1.5 Liter Coolant Formula $43.00

Chillout Systems 1.5 Liter Coolant Formula This 1.5 liters of coolant will last a single racer an entire season! Non-toxic and biodegradable coolant that circulates through your Chillout Systems cooler and cooling garments, keeping you cool and your cooler running in prime condition. Does not evaporate, greatly extending the amount of time between refilling your system. Chillout cooling garments encase tubular veins within the material, covering a large surface area of the body to keep you cool, dry, and focused. We suggest you replace the Chillout Coolant in your system at least once per race season. It takes less than two minutes and keeps your cooling system running in peak condition.

Bell Racing Helmets Bell Forced Air Low Profile Nozzle & Cover Plate | For HP6 & GT6 Helmets $42.00

Bell Forced Air Low Profile Nozzle & Cover Plate The Bell Forced Air Nozzle and Cover Plate adds a genuine Bell Helmets low-profile forced-air nozzle to your HP6 or GT6 helmet. This clear high-impact plastic forced-air kit consists of the following: (1) Forced-air low profile nozzle (1) Cover plate (2) Seal kits Each seal kit contains four pieces of double-sided adhesive tape, two pieces measuring 20 x 80 mm and two pieces measuring 20 x 120 mm.

Alpinestars KX v2 Karting Balaclava - Competition Motorsport

Alpinestars Alpinestars KX v2 Karting Balaclava $47.00

Alpinestars KX v2 Karting Balaclava Alpinestars KX v2 Balaclava Summer is extremely lightweight and thin, while being incredibly soft to the touch for greatly enhanced comfort when wearing a full face helmet, and has extensive mesh panels on the rear for optimum levels of breathability.

Molecule Molecule Race Fabric Protector 16 oz. $42.00

Molecule Race Fabric Protector 16 oz Specially engineered formula bonds technical fabrics, like Nomex, to help repel oils, grease and other liquid stains. Maintains breathability while keeping colors vibrant by shielding UV rays.