Checkered Flag Garage Sale

Bell Racing GTX.3 SA2020 Helmet With its refined, aerodynamic design and lightweight carbon composite shell, the Bell Racing Helmets GTX.3 Composite SA2020 helmet provides the best performance and pro features for open wheel, open compartment, karting, formula and dirt track racers. This Bell GTX.3 Composite SA2020 has an integrated shield and dual screen anti-fog (DSAF) visor with rear-facing vents which are ideal for these forms of racing, allowing for air exchange and unobstructed vision without worrying about dust and dirt. Bell Racing GTX.3 Auto Racing Helmet SIZE CHART Bell Racing GTX.3 Auto Racing Helmet Features Snell SA2020 and FIA 8859-2015 homologation Includes clear SE03 3mm DSAF shield (SV SE03/05 pivot system) with DSAF anti-fog insert Sleek aero styling with integrated wing Front chin bar Gurney ("duckbill") improves high-speed aerodynamic performance Venturi airflow system lets fresh air in, hollow synthetic rubber gasket seal keeps dirt, water and dust out High-strength, lightweight carbon-composite construction using new high-pressure molding system Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection Ultra-plush grey Comfort-Max FR® interior fabric wicks away moisture Install integrated drinking tube and radio microphone systems with the integrated face piece channels Multi-density foam interior and contoured cheek pads offer a professional fit Standard-sized eye port M6 terminal hardware and hex wrench for Head and Neck Restraint devices Additional visor shields for the Bell Racing GTX.3 available here. Add a Competition Motorsport Performance Racing Helmet Bag and keep your new Bell Racing GTX.3 racing helmet safe and secure throughout each race weekend.

Sparco Air Pro RF-5W - Blow Out Sale! SPARCO AIR PRO RF-5W AUTO RACING HELEMT SNELL SA2020 The Sparco helmet line is a result of over 40 years of research and development experience, including wind tunnel testing. The new SPARCO AIR PRO RF-5W range was designed to meet the requirements of the new Snell SA2020 and FIA 8859 ratings. The 2020 type-approval introduces new impact requirements, the helmets need to dissipate large amounts of energy in different ways. To meet these requirements Sparco is introducing new innovations for driver safety and comfort. All shells now have layers of carbon-Kevlar for greater strength. The helmets have also been wind-tunnel tested to maximize exterior vent placement and flow. The EPS interiors and padding have also been redesigned for increased airflow and driver comfort. Sparco also introduces a new size: Medium/Large. This M/L size takes advantage of using the smaller shell which is lighter and more compact.  Also, don't forget to check out the Competition Motorsport Performance Racing Helmet Bag to keep your new Sparco Air Pro RF-5W helmet safe and secure throughout each race weekend. SPARCO AIR PRO RF-5W AUTO RACING HELMET TECHNOLOGY Lightweight carbon-kevlar/fiberglass construction New Medium/Large size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Pre-molded interior to accommodate drink tubes and an intercom system (sold separately) Snell SA2020 and FIA 8859-2015 approved SPARCO AIR PRO RF-5W AUTO RACING HELMET SIZES: XS (54CM)  - XXL (62CM) SPARCO AIR PRO RF-5W AUTO RACING HELMET COLORS: GLOSS WHITE AND MATTE BLACK The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Bell Racing BR8 Helmet SA2020 Designed for dirt track and other forms of off-road racing, the versatile Bell Racing BR8 can be used in multiple configurations including standard, left- or right-side forced air, left- or right-3/4 top forced air, or top forced air. Bell has developed an innovative system (the kit is included with the helmet) so racers can customize the BR8 to adapt to different forms of racing and seat configurations, providing the ultimate flexibility in one auto racing helmet model. The Bell Racing BR8 features an aerodynamic front duckbill, Double Screen Anti-Fog (DSAF) insert to create a positive visor seal that prevents shield fogging, and rear-facing venturi airflow vents to prevent dust from entering the helmet while still allowing forced air to flow in. The Bell Racing BR8 features a unique air chamber system that evenly distributes airflow around the head regardless of the top air configuration used. The helmet can be used with or without ear cups. Bell BR8 Auto Racing Helmet Colors & Sizes The Bell Racing BR8 helmet comes in Gloss White and Matte Black in the following sizes: 57-58cm 58-59cm 60cm 61+cm Bell BR8 Auto Racing Helmet Details Construction: Lightweight composite shell Safety Technology: Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Comfort Technology: Integrated channels in face piece offer multiple options to install drink tube and radio system Aero: +Includes front duckbill to enhance aerodynamic performance Ventilation: Comes standard with rear facing vents that create a Venturi effect allowing air to exchange and circulate in the helmet white preventing dust and dirt from entering Interior: Black High Strength/High Comfort FR Fabric Colors: Gloss White or Matte Black Homologation: Snell SA2020 Forced air kits available for aftermarket including quick lock (V10) and are fully compatible with Maglock M6 terminals pre-installed for FHR/HANS anchor attachment Additional Bell Racing BR8 Visor Shields Available Here Add a Competition Motorsport Performance Racing Helmet Bag to your order and keep your new Bell Racing BR8 helmet safe and secure throughout each race weekend.

Sparco 6 Point 3" Competition Pull Down Aluminum Racing Harness (2030 Expiry) When you’re pushing the limits on track, your harness is your lifeline. The Sparco 6-Point Competition H-3 PD Racing Harness is engineered to keep you secure, focused, and in control through every braking zone and corner. The Sparco FIA H-3 Competition 6-Point Aluminum Racing Harness boasts 3" shoulder straps, 2" lap and sub belts, an aluminum camlock, and aluminum adjusters. The snap-in hardware and eyebolts included with the six mounting points facilitate a simple installation process. Its professional aircraft-style camlock buckle guarantees effortless belt engagement, while the steel adjusters allow for easy adjustments. Whether you're chasing tenths in time attack or racing wheel-to-wheel, this FIA-approved harness is built for serious performance and protection. Why Choose the Sparco Pull Down Aluminum Racing Harness? 6-Point Design: Helps keep the driver stable and secure under braking and cornering loads. 3" FHR Shoulder Straps: Designed for use with HANS and other FHR devices. 2" lap and sub strap belts Aluminum Buckle: Lightweight quick-release design for fast exit. Aluminum Adjusters: Durable hardware for a secure fit. Pull-Down Abdominal Adjusters: Easy tightening and adjustment. Snap Hooks and Compact T-Bar: Secure attachment and straightforward installation. Sparco Pull Down Aluminum Racing Harness Specifications Type: 6-Point Racing Harness Strap Width: 3" FHR-specific Material: High-strength webbing with aluminum and steel components Adjusters: High-resistance steel with pull-down abdominal adjustment Attachment: Snap hooks with compact T-bar FIA Certification: HOM. NO: SH.076.20-T-6 Sparco Pull Down Aluminum Racing Harness FAQs Is this harness FIA approved?Yes. It carries FIA HOM. NO: SH.076.20-T-6 certification for competition use. Can I use it with a HANS device?Yes. The 3-inch shoulder straps are designed for FHR compatibility. How does it install?The harness uses snap hooks for easy mounting. Reinforced eye-bolt anchors are recommended for custom installations. Is it suitable for endurance racing?Yes. The pull-down adjusters and compact T-bar help maintain comfort and alignment during long sessions. Lock In. Stay Safe. Drive Faster. The Sparco 6-Point Competition H-3 PD Racing Harness delivers FIA-approved protection, secure fitment, and race-ready confidence for serious drivers.

Sparco X-Light+ Racing Shoes The Sparco X-Light+ is the ultimate ultra-lightweight racing shoe. It was designed for the top level of professional drivers looking to save weight in every possible way while maintaining safety and high performance. The X-Light + is the only racing shoe on the market featuring a full fabric upper. This unique fireproof stretch fabric was developed by Sparco engineers to be breathable and durable while maintaining heat- and flame-resistance. The X-Light+ stretch fabric wraps around the foot like a second skin, preventing dust, soil, and other materials from entering the shoe. Kevlar cables woven into the upper give your foot just the right amount of support. This combination provides an extremely comfortable, highly breathable fit while offering a high level of protection. The X-Light+ is also the only racing shoe on the market with a carbon fiber midsole. This special carbon fiber was developed by Sparco engineers in the Sparco OEM Seating Division. Uniquely developed to be flexible, this carbon fiber is inlayed into the sole and runs from the heel to the toe. Carbon fiber is visible through the ultra-thin, oil-resistant, antistatic outsole, offering exceptional pedal sensitivity. The cushioned inner sole of the X-Light+ has a unique printed silicon pattern, giving this racing shoe added traction and pedal feel. The Sparco X-Light + is available the following colors: Black White/Black Black/Orange Black/Yellow Black/Red Sparco X-Light+ Racing Shoe Technology FIA 8856-2018 approved Ultra-lightweight fire-retardant stretch fabric and soft leather construction Highly breathable upper fits like a second skin Full carbon fiber inlayed sole is ultra thin, anti-static, oil- and fuel-resistant Printed silicon cushioned inner sole for maximum pedal feel

Bell K1 Pro Helmet SA2020 The Bell Racing Helmets K1 Pro composite auto racing helmet is a multi-use, full-featured helmet with superior ventilation, aero styling and Bell's aggressive chin bar design and front chin Gurney (duckbill). The K1 Pro is a great helmet for open wheel racers, closed car racers and kart racers who demand superior features including light weight, excellent fit, and multiple ventilation options. The Bell Racing Helmets K1 Pro can be used in an open wheel configuration with air intake (included), or in a closed car configuration with the top forced air insert (sold separately). BELL K1 PRO AUTO RACING HELMET COLORS Gloss White Matte Black Circuit Blue Circuit Red ADDITIONAL BELL K1 PRO SHIELD OPTIONS AVAILABLE HERE Add a Competition Motorsport Performance Racing Helmet Bag and keep your new BELL K1 PRO racing helmet safe and secure throughout each race weekend. BELL K1 PRO AUTO RACING HELMET SIZE CHART BELL K1 PRO AUTO RACING HELMET FEATURES Snell SA2020 homologation. All sizes are in centimeters. All-purpose, versatile helmet. Aggressive Bell aero styling. Lightweight composite shell. Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection. Integrated channels in the face piece for integrated radio mic systems. Black Comfort Plus FR® interior fabric for durable performance. Multi-density foam interior padding for superior fit. Excellent ventilation system includes direct-flow upper and lower chin bar vents, 10 intake and extraction vents, and a clear 2mm air intake vent. Top forced-air option available (sold separately). Hollow synthetic rubber gasket seal ensuring no air, water or dirt leaks into the helmet. Standard-size eyeport. 287 3mm SRV clear shield (SRV-1 pivot system). M6 terminal hardware and hex wrench for Head and Neck Restraint devices

Bell Racing Helmets M.8 SA2020 Helmet The Bell Racing M.8 Composite Helmet SA2020 succeeds the Bell M-Series Concept, ideal for racers who want a larger field of vision (perfect for eyeglass wearers) along with the latest Bell performance and styling.  The Bell M.8 Composite racing helmet has traditional styling while offering a wide range of updated features for all types of racing: open wheel, closed car, karting, and more. The lightweight composite shell of the Bell M.8, Comfort-Plus FR® interior, manual air intake vents, and bigger eye opening all contribute to superior protection, comfort, and air flow to keep you safe and cool under pressure. ADDITIONAL BELL M.8 HELMET SHIELDS AVAILABLE HERE Add a Competition Motorsport Performance Racing Helmet Bag and keep your new BELL M.8 racing helmet safe and secure throughout each race weekend. BELL M.8 AUTO RACING HELMET SIZE CHART BELL M.8 AUTO RACING HELMET AVAILABLE COLORS Gloss White Matte Black BELL M.8 AUTO RACING HELMET FEATURES Snell SA2020 homologation. All sizes are in centimeters. SRV-8 3mm SRV clear shield (SRV-1 pivot system). Lightweight composite shell with high-pressure molding system for improved shell strength. High-impact, multi-piece, multi-density custom bead absorbing liner improves low- and high-velocity impact protection. Install integrated radio microphone, drinking tube systems (both sold separately) with integrated channels in the face piece. Black Comfort-Plus FR® interior fabric for excellent moisture wicking and durable quality. Multi-foam density standard interior for superior fit. Optimum airflow ventilation system with direct-flow chin bar vents, manual level air intake vents. Air, dirt, and water won’t get past the hollow synthetic rubber gasket seal. Larger eyeport than many other models. M6 terminal hardware and hex wrench to install your Head and Neck Restraint Device

Alpinestars Knoxville v2 Driver Race Suit The Alpinestars Knoxville v2 race suit suit has a three-layer construction with a strong fire-resistant cotton twill and Feltro padding for optimum levels of driver protection. This suit is also equipped with stretch panels on the crotch, waist and underarm for an enhanced fit, and a twill fire-resistant cotton outer shell and lining for maximum driver comfort. Other key design features of the Alpinestars Knoxville v2 include stretchable arm construction, pre-curved arms and legs, stretch panels on the crotch, waist and shoulders for driver comfort, and an optimized fit. The Alpinestars Knoxville v2 has a boot-cut leg with inner knitted elasticated cuff for maximum fire protection. Alpinestars Knoxville v2 Racing Fire Suit Details: Certified to SFI 3.2A/5 Alpinestars stretch arm construction with aramidic knit fabric ensures minimal material resistance while driving Multi-layer construction with knitted stretch panels for maximum comfort and excellent heat resistance. Aramidic knitted stretchable panels on the back, waist, and crotch enhance comfort and ease of movement. Extended, ergonomic collar with soft knitted lining Fire-resistant fabric throughout for high heat- and flame-resistance. Alpinestars-exclusive shoulder epaulette construction eases driver extraction in the event of a crash. Alpinestars Knoxville v2 Construction: Ribbed, stretchable wrist and foot cuffs for optimum driver comfort. Premium metal double slidered zipper personalized for a versatile and customizable fit. Thigh pockets for convenient, peace-of-mind storage. Belted waist ensures a precise fit. Anatomical arm, leg and torso patterned paneling optimize fit in the driving position Comfort fit design. Fabric weight 550 g/m2

HJC H70 Top Air Auto Racing Helmet   Whether you're navigating the sand dunes of Baja or on the banked turns of the Nürburgring, HJC Motorsports has you covered with the release of its most versatile helmet to date: the all-new H70. Designed with a straightforward approach, the H70 is at home in nearly any driving conditions with the help of a few key attachments already in the box: a rear spoiler for open-cockpit driving and a top forced-air kit for vehicles outfitted with filtered air systems. Complete with factory installed M6 terminals for your favorite head and neck restraint, the HJC H70 will have you ready to take on your favorite race track anywhere in the world. HJC H70 AUTO RACING TOP AIR HELMET FEATURES Snell SA2020 and FIA 8859-2015 approved Advanced Fiberglass Composite Shell (with two shell sizes, XS-M and L-XXL) Advanced Air Circulation System: two front intakes and eight top vents Fire resistant moisture-wicking removable and washable cheek pads and head liner Polycarbonate anti-fog shield with tear-off posts Double D-ring retention system Pre-installed M6 terminals for head and neck restraints Optional shields available: Amber, Dark Smoke, Dark Blue, Fire Red, and Black Chrome Sizes: XS - XXL HJC H70 AUTO RACING TOP AIR HELMET INCLUDED ACCESSORIES Vent Plugs (8 pcs) Lower Vent Cover Top Forced Air Rear Spoiler ADDITIONAL SHIELDS AVAILABLE HERE Add a Competition Motorsport Performance Racing Helmet Bag and keep your new HJC H70 racing helmet safe and secure throughout each race weekend.  

Stand21 Porsche Motorsport Air-S Speed Racing Shoe (FIA 8856-2000) Officially Licensed Porsche Motorsport Gear The Stand21 Air-S Speed is, without exception, the lightest, most breathable and most comfortable racing shoe we've ever worn. The uppers are supple and breathable without sacrificing safety or durability. The stiff, oil-resistant soles are amazingly responsive, transmitting pedal feel at an incredible level. These are the first racing shoes we didn't want to take off immediately after a long stint -- they're that comfortable. The premium materials and superior craftsmanship are what we've come to expect from a brand like Stand21. The Porsche Motorsport embroidery is spectacular, a must-have for any Porsche enthusiast. Features FIA 8856-2000 and SFI 3.3/5 homologated Stretchable and breathable fire-retardant fabric Reinforced stiffened heel box Curved sole around the heel EVA Micro-Cellular material shock-absorbing heel Ergonomic, anti-vibration ATV hydrocarbon resistant sole Edge-to-edge assembly avoiding stuck shoes Firm hold by lacing up to the ankle US sizes 9.0 to 13.0

Sparco 6 Point 3" Competition Pull Down Steel Racing Harness (2029 Expiry) When you’re pushing the limits on track, your harness is your lifeline. The Sparco 6-Point Competition H-3 PD Racing Harness is engineered to keep you secure, focused, and in control through every braking zone and corner. The Sparco FIA H-3 Competition 6-Point Steel Racing Harness boasts 3" shoulder straps, 2" lap and sub belts, an aluminum camlock, and Steel adjusters. The snap-in hardware and eyebolts included with the six mounting points facilitate a simple installation process. Its professional aircraft-style camlock buckle guarantees effortless belt engagement, while the steel adjusters allow for easy adjustments. Whether you're chasing tenths in time attack or racing wheel-to-wheel, this FIA-approved harness is built for serious performance and protection. Why Choose the Sparco Pull Down Steel Racing Harness? 6-Point Design: Helps keep the driver stable and secure under braking and cornering loads. 3" FHR Shoulder Straps: Designed for use with HANS and other FHR devices. 2" lap and sub strap belts Aluminum Buckle: Lightweight quick-release design for fast exit. Steel Adjusters: Durable hardware for a secure fit. Pull-Down Abdominal Adjusters: Easy tightening and adjustment. Snap Hooks and Compact T-Bar: Secure attachment and straightforward installation. Sparco Pull Down Steel Racing Harness Specifications Type: 6-Point Racing Harness Strap Width: 3" FHR-specific Material: High-strength webbing with aluminum and steel components Adjusters: High-resistance steel with pull-down abdominal adjustment Attachment: Snap hooks with compact T-bar FIA Certification: HOM. NO: SH.076.20-T-6 Sparco Pull Down Steel Racing Harness FAQs Is this harness FIA approved?Yes. It carries FIA HOM. NO: SH.076.20-T-6 certification for competition use. Can I use it with a HANS device?Yes. The 3-inch shoulder straps are designed for FHR compatibility. How does it install?The harness uses snap hooks for easy mounting. Reinforced eye-bolt anchors are recommended for custom installations. Is it suitable for endurance racing?Yes. The pull-down adjusters and compact T-bar help maintain comfort and alignment during long sessions. Lock In. Stay Safe. Drive Faster. The Sparco 6-Point Competition H-3 PD Racing Harness delivers FIA-approved protection, secure fitment, and race-ready confidence for serious drivers.

Bell K1 Sport Helmet SA2020 The Bell K1 Sport SA2020 is a race-ready, multi-use, full-featured auto racing helmet, combining superior ventilation with modern styling built for the entry-level racer demanding high quality at an affordable price. Incorporating a lightweight composite shell, excellent fit, and multiple ventilation options, the all-purpose K1 Sport is a perfect choice for racers on a budget or track-day enthusiasts just entering the sport. ADDITIONAL BELL K1 SPORT SHIELD OPTIONS AVAILABLE HERE Add a Competition Motorsport Performance Racing Helmet Bag and keep your new BELL K1 SPORT racing helmet safe and secure throughout each race weekend. BELL K1 SPORT AUTO RACING HELMET SIZE CHART BELL K1 SPORT AUTO RACING HELMET COLORS Gloss White Metallic Black Safety Orange (Offshore Racing) Titanium Silver BELL K1 SPORT AUTO RACING HELMET FEATURES Snell SA2020 approved. Lightweight composite shell. Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance. Versatile ventilation system featuring lower front chin bar ventilation and upper manual lever air intake vents that can be opened and closed. Superior ventilation with direct flow chin bar vents, forehead vents, and top vents. Air Intake, rear spoiler, top gurney, and chin bar gurneys available separately. Forced air attachments available separately for use with external cooling systems. M6 terminals for FHR anchor attachment and homologated for use with approved head and neck devices. Synthetic rubber gasket seal to prevent dirt and water from entering the helmet. Shield and pivot kit: 287 SRV, SRV-1. Sizes: XXS, XS, S, M, L, XL  

Sparco Prime-T Racing Shoes The Prime-T racing shoe was originally designed by Sparco for Formula One use and is currently being used by Formula One drivers. Formula One teams are always pushing for weight reductions and that push inspires innovative solutions. The Prime-T is one of the lightest race shoes available. It features a soft leather upper with a full Velcro closure system. The lightweight perforated Velcro closure covers a breathable cloth tongue which is extremely comfortable. The Prime-T has the next generation sole made in pure lightweight rubber which enhances the pedal feel and is also anti-static, fuel and oil resistant. The sole is was designed with a stiff setting for vehicles that require maximum pedal force for braking. The Prime-T is available in European sizes 37-48. SPARCO Prime-T Racing Shoe Technology Ultra-lightweight soft leather construction Velcro closure system Stiff sole for maximum pedal feel FIA approved 8856-2018

Sparco X-Light Racing Shoes The lightweight Sparco X-Light shoe was developed using feedback from Sparco’s professional drivers. This development program created some unique features for the new shoe. In place of a traditional tongue, the X-light uses a durable fabric called Jaquard that acts as an upper stretch panel. This unique upper reaches a whole new level in racing shoe comfort by letting them stretch and breath. The same Jaquard material is on the backside of the shoe, allowing the Achilles unrestricted movement. The X-Light has Sparco's next generation sole made from lightweight pure rubber, enhancing pedal feel while remaining anti-static, fuel- and oil-resistant. The mid-cut design features a full ultra-soft calf skin leather upper with perforated vents. The X-Light has a pre-formed cushioned insole. The Sparco X-Light is available in four colors: White/Red, Blue/White, Grey/Orange and Black in European sizes 37 through 48. Sparco X-Light Shoe Technology Unique stretch tongue upper panel Ultra-soft calf skin leather mid-boot design with Achilles stretch panel for mobility and comfort Pre-formed cushioned insole Next-gen sole in pure lightweight rubber for excellent pedal feel Anti-static, fuel and oil resistant sole Speed laces and standard laces included FIA 8856-2018 approved

Sparco RW-10 Seamless Nomex Shirt (Garage Sale) The Sparco RW-10 line of Nomex undergarments is the lightest and most breathable on the market that is homologated to the new FIA 8856-2018 standard. When designing this new line of undergarments, Sparco studied the drivers seating position to ensure ultimate fit and comfort. The RW-10 features a fully seamless structure with ultra-soft stretchable material for a very comfortable fit. RW-10 shirts and underpants are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool treatment has an anti-bacterial effect. The RW-10 Undershirt is a seamless design with no seams for additional comfort. It is available in four sizes: X-Small, Small/Medium, Large/XL, and XXL. The RW-10 undershirt is a compression type fit, so if you prefer a looser fit you should choose one size larger than you normally wear. Available in Black, Grey, Navy, or White. Sparco RW-10 Nomex Shirt Technology Newest FIA rating, FIA 8856-2018 Seamless stretchable Nomex in key areas for mobility Designed for comfort in the driving position Minimal external seams increase driver comfort X-Cool Silver draws heat from the body surface to cool the driver X-Cool Silver has anti-bacterial effect