Brand

A1-127 Girodisc Two-Piece 380mm Front Brake Rotors FITMENT: Porsche 997.1 GT2/GT3 (2007-2011) w/ OEM PCCB This Girodisc system is a direct 380mm replacement for the OEM front rotors on the Porsche 997.1 GT3/GT2 with OEM PCCB brakes. No modifications are necessary, allows use of factory unmodified pads unlike most aftermarket solutions for this application. The Girodisc rotors will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with lightweight, high performance replacements (as opposed to a big brake kit), your factory bias is maintained as well as your ABS efficiency. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-128 Girodisc Two-Piece Front Brake Rotors FITMENT: Ferrari 458 Challenge Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-133 Girodisc Two-Piece Front Iron Rotor Replacement FITMENT: Ferrari 430 with OEM CCM Rotors This Girodisc system is an direct replacement1 of the Ferrari CCM front rotors with a two-piece steel rotor and aluminum hat combination. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly1. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair. 1 Note: These Girodisc rotors have a different annulus (pad swept area) than the OEM CCM rotors, to maintain their light weight. A brake pad with an annulus of 66mm or less must be used with these Girodisc rotors. The necessary pad shape is very common, found on the Nissan GT-R, Cadillac CTS-V, and most AMG Mercedes equipped with six-piston calipers. If there's a specific pad and/or compound you're after please, contact us at (844) 438-7244 and we'll get you what you need!

A1-139 Girodisc Two-Piece Front Brake Rotors FITMENT: Renault Megane III RS, Front (2017+) This 350mm Girodisc system is a direct replacement for the OEM 340mm Renault rotors, no modifications are necessary. The rotors will bolt directly to the car and work with your OEM calipers using the supplied billet spacers to accommodate the 10mm larger Girodisc rotors. By upgrading your brakes with lightweight high performance replacements (as opposed to a big brake kit), your factory brake bias is maintained as well as your ABS efficiency. The Girodisc front rotors are approx. 22.0 lbs. vs. 25.2 lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-145 Girodisc Two-Piece Front Brake Rotors FITMENT: Chevy Corvette Z06/Z07 (C7), Front w/ OEM CCM Iron Rotor Conversion The A1-145 Girodisc system is a two-piece steel rotor and aluminum hat combination that directly replaces the fragile and expensive front ceramic brake rotors on the C7 Corvette Z06 with the Z07 package1. Upgrading your brakes with these lightweight, high-performance replacements is an excellent solution to the expensive, fragile ceramic rotors on the C7 Corvette Z06 w/Z07 package. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair. 1 Note: These Girodisc rotors have a different annulus (pad swept area) than the OEM CCM rotors, to maintain their light weight. A brake pad with an annulus of 66mm or less must be used with these Girodisc rotors. We recommend using the Cobalt C7 Z07 racing brake pads with this system. If there's another pad and/or compound you're after please, contact us at (844) 438-7244 and we'll get you what you need!

A1-146 Girodisc Two-Piece Front Brake Rotors FITMENT: Porsche 991 GT3/GT3RS/GT2RS, Front (2014+) with steel brakes The Girodisc system is a direct replacement for the OEM front rotors on the Porsche 991 GT3, GT3RS, and GT2RS with OEM iron rotors. No modifications are necessary, including full use of factory unmodified pads unlike most aftermarket solutions for this application. The GIrodisc rotors will bolt directly to your car and work with OEM calipers perfectly. By upgrading your brakes with lightweight, high performance replacements -- as opposed to a big brake kit -- your factory brake bias and ABS efficiency are preserved. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-147 Girodisc Two-Piece Front Brake Rotors FITMENT: Chevy Corvette C7 Z06, Front Chevy Corvette C7 Grand Sport, Front Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Each Girodisc two-piece floating rotor is approx. 1.6 lbs. lighter than the stock units, 22.0 lbs. vs. 23.6 lbs. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-152 Girodisc Two-Piece 380mm Front Brake Rotors FITMENT: Audi TT RS (8J), Front This Girodisc system is an upgrade from the 365mm stock front brake rotors to a two-piece, 380mm steel rotors and aluminum hat combination . It is a direct replacement for the OEM brake rotors, needing no modifications. The two-piece floating rotors will bolt directly to your Audi and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-153 Girodisc Two-Piece 350mm Front Brake Rotors FITMENT: Porsche Boxster S and Cayman S (981), Front This Girodisc system is an upgrade from Porsche's 330mm one-piece OEM front rotors to 350mm two-piece floating steel rotors with aluminum hats, a direct replacement for the OEM brake disc. The two-piece floating disc will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-154 Girodisc Two-Piece 410mm Front Brake Rotors FITMENT: Porsche GT3 (991) w/ factory PCCB Porsche GT3RS (991) w/ factory PCCB Porsche GT2RS (991) w/ factory PCCB Porsche GT4RS (718) w/ factory PCCB This 410mm Girodisc conversion system is a direct front rotor replacement for the Porsche 991.1 or 991.2 GT3, GT3RS, GT2RS, and GT4RS originally equipped with PCCB brakes. These two-piece floating iron rotors with aluminum hats will bolt directly to your Porsche and work flawlessly with the OEM front calipers. You must use must use the pad shape used on the 991 GT3 with iron rotors. The annulus (pad swept height) of these rotors is smaller than the PCCBs to keep rotor weight low and allow far better pad selection. By upgrading your brakes with lightweight, high-performance Girodisc rotors, especially when paired with Girodisc A2-154 rear rotors, your Porsche's factory brake bias and ABS efficiency are maintained. The low rotational mass and unsprung weight of Girodisc rotors allows for quick acceleration and fast transient suspension response. Most racers replace the factory PCCBs with Girodisc rotors to avoid the inevitable damage to fragile carbon-ceramic discs when swapping wheels at the track. We suggest using these rotors with these Pagid 4924 or PFC brake pad profiles normally used in the Porsche 991 GT3 without PCCB. When combined with Competition Motorsport RF1 Racing brake fluid or the New HALO P1 High Performance Brake Fluid, you'll have an extremely reliable and durable solution to cracked or broken carbon-ceramic rotors at a fraction of the cost of factory PCCBs. The central hat section of the Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-156 Girodisc Two-Piece 410mm Front Brake Rotors FITMENT: Porsche 911 Carrera Turbo (991), Front Porsche Cayman GT4 (981), Front This Girodisc system is a 410mm two-piece steel rotor and aluminum hat combination, a direct-replacement upgrade for your car's OEM PCCB brakes1. The Girodisc A1-156 will bolt directly to your Porsche and work perfectly with your OEM calipers. There are two main reasons for replacing your PCCB: first, Girodisc rotors are designed to shed heat more effectively than the original rotors; second, the machined cast iron rotor rings are far more durable than the fragile PCCB rotors. This is critical when you're swapping wheels on-and-off the car for track days or racing. It's so easy to nick a carbon rotor and take a chunk out of it, rendering it useless. Pair these Girodisc rotors with Girodisc A2-156 rear rotors to maintain your factory brake bias and ABS efficiency. When used with Pagid or PFC performance brake pads, and CMS RF1 brake fluid, you have an excellent solution to easily cracked carbon-ceramic rotors. The central hat section of the Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair. 1 Note: you must use the same pad shape as that used on the Porsche 991/992 GT3/Turbo with factory iron rotors. The annulus (pad swept height) of these pads is smaller than that of the large PCCB pads.

A1-157 Girodisc Two-Piece Front Brake Rotors Fitment: BMW E9x M3 Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-159 Girodisc Two-Piece 394mm Front Brake Rotors FITMENT: McLaren 570S, Front McLaren 650S, Front This Girodisc system for the McLaren 650S or 570S is a direct replacement for the OEM McLaren carbon ceramic front rotors1. It is an upgrade to a two-piece steel rotor and aluminum hat combination. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. When used with the proper brake pads1 and high-temperature racing brake fluid, these Girodisc replacement rotors give you an excellent, race-proven solution to the fragile and expensive carbon-ceramic OEM rotors on your McLaren. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair. 1 Note: These Girodisc rotors have a different annulus (pad swept area) than the OEM carbon-ceramic rotors, in order to maintain their light weight. A brake pad with an annulus of 66mm or less must be used with these Girodisc rotors. We recommend the Pagid 8081 racing brake pads in either RS29 (endurance racing) or RS14 (sprint racing) compound.  If there's another specific pad and/or compound you're after please, contact us at (844) 438-7244 and we'll get you what you need!

A1-161 Girodisc Two-Piece Front Brake Rotors FITMENT: Ferrari 488 GTB, Front w/ factory CCB Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is a replacement for the factory Ferrari Carbon-Ceramic Brakes with a two-piece steel rotor and aluminum hat combination. It is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than typical brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads, and Competition Motorsport RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-162 Girodisc 2pc Front Brake Rotors FITMENT: Ford Shelby GT350/GT350R (2015+) This Girodisc system for the Ford Shelby GT350 and GT350R is a direct replacement for the OEM front brake rotors; no modifications are necessary. The rotors will bolt directly to your Shelby and work flawlessly with the OEM calipers. By upgrading your brakes with lightweight, high performance two-piece floating rotors (as opposed to a big brake kit) your factory dialed-in brake bias is maintained as well as your ABS effectiveness and efficiency. Together with our customers, we have thousands of track miles on Girodisc rotors on every conceivable car. They are the go-to rotor for any of our track-day and race-car builds. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 racing brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.

A1-164 Girodisc Two-Piece Front Brake Rotors FITMENT: Porsche 991 Cup Car Competition Motorsport is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from Competition Motorsport), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair.