Brand

AiM MXS 1.2 Color TFT 5" Dash And Data Logger Check Out The MX Series User Manual Here The MXS 1.2, the evolution of MXS, is a beautifully executed compact dash/data logger designed to put data at your fingertips. It can acquire data from your ECU, its internal accelerometer and gyro, the included GPS08 Module, analog/digital inputs and pre-defined math channels. The incredibly sharp, full-color TFT display puts it all front-and-center, in incredible color with a high contrast ratio. It even automatically adjusts its backlight based on ambient light to optimize visibility. Freely configurable pages let you define all the custom pages you wish, choosing from a wide library of page styles and defining which data to display, their end of scale and units of measure. Swapping between pages is as easy as pushing a button! GPS08 Thanks to the included GPS08 Module and AiM's Race Studio 3 software, you can immediately get lap times along with all data needed for engine tuning, shaking down car and driver, and for improving and refining driving technique. A MULTITUDE OF DISPLAYS The MXS 1.2 displays your RPM scale plus all the data you need (speed, water temp, oil pressure, lap times and much more) in pre-configured pages.  Or you can customize pages as you wish, choosing from a wide library of page styles and defining which data to be shown, their end of scale and measure units. Swapping between pages is quite easy using push buttons. A 4GB non-volatile memory stores hours of information for detailed analysis using AiM's Race Studio 3 software. All data can be downloaded to your computer using a built-in secure Wi-Fi connection (no cable required). LOTS OF INPUT/OUTPUT FLEXIBILITY Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). CAN Inputs allow you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam, or even channel expansion hubs, without using any analog channels. A separate CAN Output allows you to send messages to the existing CAN network, adding to the vehicle system control possibilities! The MXS 1.2 can also be connected to many different ECUs to log data gathered by each ECU. An internal three-axis accelerometer, gyroscope, and magnetometer; GPS08 input; four wheel-speed channels; lap time receiver input; and two digital outputs add up to a flexible, expandable data logger that can grow with you. It even has a screw-in port to add analog cameras used for back-up or rear view in visibility-challenged race cars! SHIFT LIGHTS & ALARMS Flexible alarms on the MXS 1.2 include six configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. The integrated shift light array features a host of advanced multicoloured RGB shift light patterns that can be customized as you like, including RPM max for each individual gear. DIGITAL OUTPUTS The MXS 1.2 features two digital outputs (low-side type, switch to ground) that can be configured to activate/deactivate external systems (switch on/off additional lights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs. WiFi CONNECTIVITY A secure 802.11 WiFi connection makes it even more convenient to configure, calibrate, and download your data wirelessly! No need to move your PC close to the vehicle anymore, you can do it from your trailer or tow vehicle up to 60 yards away. TECHNICAL SPECS: Compact 6.7" x 3.8" x 0.9" anodized aluminum housing 5" TFT high-contrast color display Internal 4GB memory Screen resolution 800x480 pixels Two Motorsport connectors and one Binder connector Weight 1.2 lb. (530g) Waterproof IP65 KIT INCLUDES: MXS 1.2 Unit GPS08 Module with cable USB cable 37-pin standard Deutsch-connector harness Software installation CD with Race Studio 3 software. All other sensors and modules sold separately.

The Compact Color TFT Dash For Road Use WIDE RANGE OF DATA & DISPLAYS MXS 1.3 Strada is a beautifully-designed, feature-rich color digital dash display. It is basically the MXS 1.3 without the datalogging function. The MXS 1.3 Strada features a compact 5" High Contrast TFT color screen with great visual impact, configurable to show lap times, RPM, and a huge range of info coming from your Engine Control Unit, analog/digital inputs, pre-defined math channels and an optional GPS08 Module. Programmable multicolor shift and alarm LEDs round out an incredibly powerful package. There's even a version with "Street Icon" LEDs instead of the traditional "plain" LEDs! The MXS 1.3 Strada displays your RPM, selected gear, speed, plus all the data you choose (water temp, oil pressure, trans temp, lap times and much more) in either pre-configured or user-customized pages. Swapping between pages is as easy as pushing buttons. Plus the MXS 1.3 Strada puts a huge amount of control over your car's systems at your fingertips. INPUT & OUTPUT FLEXIBILITY Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). Choose between OBDII and CAN/RS232 versions to suit your needs and level of customization. Both receive rich data from your ECU. An OBDII input connection is an easy, plug-and-play option. A hardwired CAN input allows you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam, or even channel expansion hubs, without using any analog channels. A separate CAN output allows you to send messages to your car's existing CAN network, adding to the vehicle system control possibilities!   ALARMS & SHIFT LIGHTS The ten multicolored RGB shift lights can be customized to define the max RPM  for each single gear.  The same flexibility applies to the configurable RGB alarm LEDs: you can configure them to turn on/off depending on analog or digital inputs, ECU values, expansion values, math channels or GPS information (with the optional GPS08). You choose conditions, colors, and select a solid alarm or flashing one (including flash frequency). It's also possible to configure an accompanying text message.   DIGITAL OUTPUT The MXS 1.3 Strada features a low-side (switch to ground) digital output that can be configured to activate/deactivate external systems (switch on/off additional lights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs.   RACE STUDIO 3 INTEGRATION MXS 1.3 Strada is configured using your PC and Race Studio 3. You can create, customize, delete, import and export configurations with all channels, ECU drivers, Math Channels, Display Pages, Digital Output, Alarms, Shift Lights and all the expansions you need. TECHNICAL SPECS: Compact 6.7" x 3.8" x 0.9" anodized aluminum housing 5" TFT high-contrast color display Choose Standard or Street Icon LEDs Screen resolution 800x480 pixels Weight 1 lb. (480g) Waterproof IP65 KIT INCLUDES: MXS 1.3 Strada digital dash USB cable 14-pin standard wiring 23-pin Connector + contacts Installation CD with Race Studio 3 software All sensors and modules sold separately.

AiM 23-Pin MXS/MXP Strada Harness This add-on harness plugs into the 23 pin AMP connector on the AiM MXS 1.2 Strada, MXP Strada, and MXG 1.2 Strada street dashes to unlock certain dash features. If you don't want to build your own harness, this harness is required in order to use the following features: Analog input channels (8) Digital wheel speed channel (1) RPM input Digital output CAN2 stream input Manufacturer: AiM Manufacturer part number: V02573220 For use with AiM MXS 1.2 Strada (Standard and "Street Icons"), MXP Strada, and MXG 1.2 Strada only. Not for original MXS Strada, MXS/MXP/MXG data logging dashes, or any other dash or logger.  

AiM MXT 1.3 Logger with GPS Ready to elevate your racing game? Meet the AiM MXT 1.3 Logger with GPS – the ultimate data logging dash that transforms your track day into a high-tech mission. This bad boy isn't just a dashboard; it's your new best friend on the circuit. Features And Benefits Flexibility and Customization Galore: The AiM MXT 1.3 boasts an extra-large 1280x480 pixel (10" diagonal) TFT display, breaking free from the boring, factory-designed LCDs. Want your data your way? You got it! The customizable screen lets you set up eight different pages with unique designs. Data Overload (In the Best Way): With eight analog input channels, you can sample, log, and display a wide array of temperatures, pressures, and potentiometers (think throttle and steering positions). And that's just the start. A CAN input allows endless expansion with AiM CAN Data Hubs (sold separately). Connect Lambda (O2) sensors, SmartyCam, or even more channels without using analog inputs! Ultimate Compatibility: Hook up to multiple ECUs to log any data your engine management system gathers. The MXT 1.3 also includes an internal gyroscope, 3-axis g-sensor, GPS module, four-wheel speed channels, a lap time receiver input, and two digital outputs. It's a data-logging beast that grows with you. Visual Delight: Housed in a sleek, anodized aluminum frame (10.94" x 5.3"), the 9.6" x 3.6" screen auto-dims to match your environment. Configure ten shift light LEDs and six alarm LEDs to flash in any of seven colors, triggered by your custom conditions. Set shift lights for each gear, choose colors, and more! Rear-View Magic: An extra port lets you connect analog cameras to use the dash as a backup or rear-view mirror display. Note: this doesn't work with the SmartyCam, but it's perfect for other cameras. Massive Storage and Easy Downloads: With 4GB of non-volatile memory, store hours of race data for deep dives later. Download everything to your computer using the built-in secure Wi-Fi – no cables needed. What’s in the Box? The MXT 1.3 data logging display, wiring harness with a 37-pin Deutsch connector, and the GPS09 module. Note: All sensors are sold separately, and for additional connections, you’ll need the AiM MX-Series Auxiliary Wiring Harness with 22-Pin Deutsch Connector (also sold separately). Product Specifications: Display: 1280x480 pixel (10" diagonal) TFT Housing: 10.94" x 5.3" anodized aluminum Channels: 8 analog inputs, 1 CAN input Sensors: Internal gyroscope, 3-axis g-sensor, GPS module, 4 wheel speed channels Memory: 4GB non-volatile Connectivity: Secure Wi-Fi, 2 digital outputs Power Supply: 9 - 15V external FAQs Q: Can the MXT 1.3 connect to my car's ECU? A: Absolutely! The MXT 1.3 can connect to a wide range of ECUs to log any data collected by the engine control unit. Q: How many pages can I customize on the display? A: You can create up to eight different pages, each with its unique screen design. Q: Do I need a separate power supply? A: Yes, the MXT 1.3 requires a 9 - 15V external power supply. Q: Is the SmartyCam compatible with the camera input port? A: No, the extra port on the MXT 1.3 is not compatible with the SmartyCam. It’s designed for other analog cameras. Q: What do I need for additional connections? A: For analog channels 5-8, speed inputs 2-4, digital outputs, and RS232 ECU connection, you’ll need the AiM MX-Series Auxiliary Wiring Harness with 22-Pin Deutsch Connector (sold separately). Ready to dominate the track? The AiM MXT 1.3 Logger with GPS is your ticket to precision, performance, and endless customization. Don’t just drive – thrive. Grab yours today and leave your competition in the dust! Call To Action: Don’t wait – gear up for your next race with the AiM MXT 1.3 Logger with GPS. Click "Add to Cart" now and transform your driving experience! All other sensors and modules sold separately.

AiM MyChron5 Kart Racing Steering Wheel The MyChron5 Kart Steering Wheel has been specifically designed for oval karts; its shape allows a perfect view of the track and your MyChron5 is placed in the best position to keep data available at a glance. The ideal complement for your newest MyChron5, light-weight and ergonomical, it allows you to put your MyChron5 in the best position: right in front of you. You can fully access the power of the MyChron5, viewing your data at a glance while maintaining optimum driving precision. Designed with a flat bottom and curved top, the AiM MyChron5 Steering Wheel is made of an anodized aluminum frame with Alcantara grips and durable Nabuk covering on the sides. The rugged and ergonomic MyChron5 Oval Steering Wheel is a balanced mix of great design, excellent feel, and top technology all at your fingertips! SAFETY IS THE PRIMARY GOAL The outer rim has been designed without edges, to avoid any problem in case of accident. Different from traditional aluminum/steel steering wheels, the MyChron5 Steering Wheel utilizes polyurethane to minimize vibration on the driver's hands. This greatly reduces driver fatigue. The MyChron5 Karting Wheel is easy to install, resistant to all weather conditions, and jet-washable without any problem. SPECS Weight: 600g (1.3 lbs.) Diameter: 340mm (13.4 in.) Chassis: Anodized aluminum Covering: Alcantara and Nabuk Leather Call us with any questions you have about the AiM MyChron5 Kart Racing Steering Wheel from Competition Motorsport!

AiM Sports MyChron5S 2T Dual-Temp Digital Datalogging Dash For Kart Racing Data acquisition for karts enters a totally new dimension: MyChron 5S 2T. Besides sampling all your kart data, MyChron5S 2T features all the advantages of GPS timing and tracking, dual-temperature inputs, plus a lot of new functions designed to provide more complete and reliable information both during and after each race: Lap and split times Speed RPM Combine EGT with either CHT or H2O temps Track Position Acceleration Much more! MyChron5S 2T has been designed to provide both basic info (for new racers) and the most sophisticated data to karting professionals. Fully configurable layout lets you customize the data, color, LED indicators, etc. to suit your individual needs. The MyChron 5S 2T comes with a Y-Cable for temperature sensors, an EGT thermocouple, and your choice of either a CHT (cylinder head temp) or H2O (water jacket) thermocouple. Using a two-satellite sensor, the MyChron 5S 2T provides super-accurate GPS data for lap/split times, position, speed, etc. We have a huge track database for easy download of detailed track info. For ten years, the MyChron4 was the benchmark gauge in karting data acquisition. AiM re-establishes the benchmark with the MyChron 5S 2T -- a leap ahead of the 4 (and all its imitators). At the same time, the MyChron5 2T is fully compatible with all MyChron4 peripherals, as well as a Lambda controller, Data Hub, MyChron Expansion, and SmartyCam. FEATURES: Automatic Start Rechargeable Li-Ion battery lasts up to 10 hours 1 MB memory for over 3 hours of data logging Two Temperature channels Seven fully-configurable LEDs (alarm, shift, etc.) LCD screen with configurable color Wireless data download via secure Wi-Fi connection Intuitive menu design for easy configuration Call us with any questions you have about the incredible MyChron5S 2T from AiM!

AiM Sports MyChron5S Digital Datalogging Dash For Kart Racing Data acquisition for karts enters a totally new dimension: the AiM MyChron5S. Besides sampling all your kart data, MyChron5S features all the advantages of GPS timing and tracking, plus a lot of new functions designed to provide more complete and reliable information both during and after each race: Lap and split times Speed RPM Head, H2O, or Exhaust Temperature (or two temps with 2T!) Track Position Acceleration Much more! MyChron5S has been designed to provide both basic info (for new racers) and the most sophisticated data to karting professionals. Fully configurable layout lets you customize the data, color, LED indicators, etc. to suit your individual needs. Plus, the MyChron5S 2T adds sampling of a second temperature to the basic MyChron5S. Using a two-satellite sensor, the MyChron5 provides super-accurate GPS data for lap/split times, position, speed, etc. We have a huge track database for easy download of detailed track info. For ten years, the MyChron4 was the benchmark gauge in karting data acquisition. AiM re-establishes the benchmark with the MyChron5S -- a leap ahead of the 4 (all its imitators). At the same time, the MyChron5 is fully compatible with all MyChron4 peripherals, as well as a Lambda controller, Data Hub, MyChron Expansion, and SmartyCam. Features include: Automatic Start Rechargeable Li-Ion battery lasts up to 10 hours 1 MB memory for over 3 hours of data logging One Temperature channel (two on the 2T; both include thermocouple) Seven fully-configurable LEDs (alarm, shift, etc.) LCD screen with configurable color Wireless data download via secure Wi-Fi connection Intuitive menu design for easy configuration Call us with any questions you have about the incredible new MyChron5S from AiM Sports! * Configurable as Shift Lights or RPM/Lap Times Alert

AiM MyChron Expansion The AiM MyChron Expansion is an add-on for the MyChron4 or MyChron5 Kart Racing Data Logging Dash. It plugs into the CAN expansion port on your MyChron dash to expand its capabilities. The Expansion has a single CAN expansion port plus four additional sensor inputs. All four inputs can accept common karting sensors (brake/throttle pedal position, temperature, steering angle, etc.). One of the four inputs can accept a speed sensor instead. Requires an external 12-volt power source such as your kart's battery. The MyChron Expansion channel multiplier improves MyChron5 and MyChron5 2T (and also MyChron4 and MyChron4 2T) performance, thanks to four additional channels and a further CAN bus connector. Through this last connector, the systems can be connected to LCU-One Lambda controller and SmartyCam HD (and to GPS and Data key for MyChron4 systems). Thanks to its specific wirings, MyChron Expansion powers the systems and their peripherals with an external battery, avoiding internal battery consumption. All channels are easily configurable as analog through the system menu to sample data coming from: Exhaust gas valve position sensor (very important to understand at which RPM value the exhaust port opens) Wheel speed sensor: the first input on the left can be configured also as digital input No contact brake pedal position sensor No contact throttle pedal position sensor Brake pressure sensor Water temperature or cylinder head temperature (PT100 thermo-resistor only) Steering angle potentiometer (to highlight over/under steering situations) Brake pedal potentiometer Throttle pedal potentiometer MyChron Expansion is a complete, value-for-money instrument for professional kart analysis. Call us with any questions you have about the MyChron Expansion from AiM Sports!

AiM Patch Cable With Microphone   CAN cable with external mic to connect a supported AiM data logger or dash logger to SmartyCam HD Rev 2.1 / SmartyCam GP HD Rev 2.1.  *Not compatible with SmartyCam GP HD Rev 2.2 4 meters in length. 7-pin 712/male to 5-pin 712/male  

Aim Sports Patch Cable: 4 Pin 712-712 Male to Female   The AiM 712-712 male to female four pin patch lead has metal screw-on connectors. This is an extension cable with 4-pin Male and Female ends of various lengths.  AiM 712-712 Male to Female 4 Pin Patch Lead The AiM 712-712 male to female four pin patch lead has metal screw-on connectors. This is an extension cable with 4-pin Male and Female ends of various lengths. This cable style is typically used to connect sensors to the Channel Expansion Hub or extend the wiring of an existing component.This patch lead is usually used with the MXL Strada, MXL Pista and the EVO4 Data Logger to connect the Infrared lap timing receiver. Key Features: 712-712 patch lead 4 pin male to female  High-quality connectors Various lengths available  

  AiM Sports 5-pin 712 To 712 CAN Patch Cable These cables each have a female 5-pin 712 (screw-in) connector on one end and a male 5-pin 712 connector on the other. The 5-pin 712 connector is used on all AiM dash and data logger CAN inputs. These cables will extend the reach of CAN hubs and other accessories.  Part numbers:  V02552700 – cable length: 1 Meter  V02552720 – cable length: 2 Meters  V02552730 – cable length: 3 Meters  V02552740 – cable length: 4 Meters

  AiM Sports 712 to 719 Four-Pin Patch Cables NOTE: Cables typically take 3 to 5 business days to ship.   Add the appropriate AiM Sports 712 to 719 4-Pin Extension Cables to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level!   The AiM Sports 712 to 719 4-Pin Patch Cables have a female 4-pin 719 (plastic) connector at one end and a male 4-pin 712 (threaded) connector at the other to connect most analog automotive sensors to the MyChron3, XG-Log Auto Dash, AiM EVO4, or AiM EVO4s  Data Logger. Available in 0.5 thru 4 Meter lengths. CONNECTS TO: MyChron3 Data Hub XG-Log Auto Dash EVO4 Logger EVO4s Logger PART NUMBERS: V02PCB05BTXG – cable length: 0.5m (1.6 ft) V02PCB10BTXG – cable length: 1 meter (3.3 ft) V02PCB15BTXG – cable length: 1.5 meter (4.9 ft) V02PCB20BTXG – cable length: 2 meters (6.6 ft) V02PCB25BTXG – cable length: 2.5 meters (8.2 ft) V02PCB30BTXG – cable length: 3 meters (9.8 ft) V02PCB35BTXG – cable length: 3.5 meters (11.5 ft) V02PCB40BTXG – cable length: 4 meters (13.1 ft) V02PCB50BTXG – cable length: 5 meters (16.4 ft)                

AiM Sports Position Sensors NOTE: Sensors typically take 3 to 5 business days to ship. Add the appropriate AiM Sports Position Sensor to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level! All sensors have a 30cm (12 inch) cable length

AiM Sports Pressure Sensor NOTE: Sensors typically take 3 to 5 business days to ship. Add the appropriate AiM Sports Pressure Sensor to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level! All sensors have a 40 cm (16 inch) cable length

AiM Sports SmartyCam 3 Dual Data Logger Camera One AiM SmartyCam Is Great, But Two Are Better! The AiM SmartyCam 3 Dual is a true dual-lens HD motorsports camera and data logger, designed for the extraordinary rigors of race track competition. Taking the best features of the SmartyCam 2.1 and 2.2 GPHD, the SmartyCam 3 Dual brings two full HD images from independent cameras at a resolution of 1920x1080 pixels and a crystal-clear 60 fps. Dual Motorsports Cameras The SmartyCam 3 Dual features two separate bullet cameras that are easily placed anywhere in the cockpit with the included 2M (6.6 ft) SMA cables. SMA cables are small, shielded, and feature threaded connections on each end for the best in video data in the harshest of race conditions. Video Streaming Output SmartyCam 3 Dual features a video streaming output channel with SDI interface. Your 3G-SDI format video and audio stream is now able to be sent to a data streamer at your choice of 30 or 60 fps. Live data streaming has never been easier. AiM RaceStudio 3: The Benchmark in Video Racing Analysis AiM RaceStudio 3 software is included to allow you to customize and configure your overlays in a virtually infinite variety of ways. You can easily add your team logo, sponsor information, track map or graphic objects from a list of pre-determined sets with the same layout or single objects from different sets, This could even be adding your second camera video in Picture-In-Picture mode with your team logo and a track map showing. AiM RaceStudio 3 is powerful and fully customizable for your team and sponsor needs. Your entire video session can also be split easily. Individual videos of separate laps can now be simultaneously viewed side-by-side to identify best race line and lowest lap time. The "Share And Compare" feature lets you compare video of your best lap alongside your friend's or teammate's personal best. AiM RaceStudio 3 makes lower lap times a whole lot easier to achieve. Internal Data Logger Built-in The SmartyCam 3 Dual has a second ECU CAN interface allowing for CAN expansions without the need for an ECU bridge. Both your video and CAN data is stored on a standard removable SD card (not included) with capacity of up to 2TB, with all data stored in the mp4 file format. At the end of your stint or session, your SD card contains all the information you need for a deep data dive, helping you find the tweaks needed for lower lap times. Designed for the Extremes of Motorsports The SmartyCam 3 Dual is a true motorsports camera protected by a solid aluminum housing with a hard anodized finish. Built for the rigors of racing with an IP65 waterproof rating, the SmartyCam 3 Dual is at home in your Porsche GT3 Cup, Super Trofeo, TA2 Camaro, F4, or 125cc Shifter Kart. Whatever you drive, you can trust the AiM SmartyCam 3 Dual to get you great video and data. Automatic Start & Stop Easy integration and automation with your AiM family of data components. The SmartyCam 3 Dual can be set up to automatically power on, start recording, stop recording, lock your data and video file and power down. Focus on your competition, not your proven data system. No "Wave Effect" with Global Shutter CMOS Solid motor mounts, straight cut gearboxes, and high-revving race engines affect most wave type shutter systems found on ordinary action video cameras. If you have ever seen a video that gets wavy and wobbly at high RPMs, you've seen the limits of wave shutters. The AiM SmartyCam 3 Dual uses a solid CMOS Global Shutter to provide quality, crisp, clear videos even in the most aggressive race cars. High Quality Video in a Small File Size Optimized video compression in H.264 allows a more compact video file size for the perfect balance of file size and video quality. Full HD is accomplished without the massive file sizes normally required. Championship World Racing League, SRO, and ChampCar teams swap video cards at every practice, qualifying, and race pit stop. This data is only readable after it's uploaded, so the H.264 allows for a faster data download of your driver and vehicle performance as well as vehicle health. AiM Sports SmartyCam 3 Dual Data Logger Camera Details: Manufacturer: AiM Manufacturer part number, 67°: XS3DB6767L2L200 Manufacturer part number, 84°: XS3DB8484L2L200 Manufacturer part number, 120°: XS3DB120120L2L200 Video format: H.264 compression; 1920x1080 pixels @ 60 fps Display resolution: 2.4 inches, 240x320 pixels Lens: Low distortion camera lens (x2) CMOS Sensor: Global shutter Field-of-view: choose 67°, 84° or 120° Internal battery: Rechargeable lithium battery Video out: 3G-SDI External power: 9V to 15V Supported MicroSD Card (not included): up to 2TB Usage temperatures: -10°C to 50°C (14°F to 122°F) Auto Power On/Off: Yes Auto Start/Stop Recording: Yes Body construction: anodized aluminum Dimensions (main unit): 154.4 x 109.6 x 42.0 mm (6.1 x 4.3 x 1.7 in) Dimensions (bullet camera): ø 24 mm x 48.2 mm Connectors: Deutsch 22 pin (x1); SMA SDI Video out (x1); SMA bullet connection (x2); USB-C (x1) Bullet camera cable length: 2M (6.6 ft) Weight: main unit, 800g (1.8 lb); bullet camera (each) 45g (1.6 oz) Waterproof: IP65

AiM Sports SmartyCam 3 Sport The new AiM SmartyCam 3 Sport takes your on-track racing videos to the next level. Specs include a resolution of 1920x1080 Full HD with a frame rate of 30 frames per second utilizing H.264 (MPEG-4 Advanced Video Coding), giving you the most advanced video quality of any AiM camera ever. This is not a plastic "action-sports" camera, it's a real motorsports camera built to live up to the rigors that a race car puts cameras through. The AiM SmartyCam 3 Sport is the latest generation of the best motorsports cameras. If you have an AiM dash and want to add great videos that include all the technical information that will help you improve your performance, the AiM SmartyCam 3 Sport is your answer. Get the Shot Every Time with Automatic On/Off AiM SmartyCam 3 Sport can be switched on/off automatically by the logger it is connected to. Simply decide what period of non-activity triggers the camera to switch-off. Both operations can also be carried out using the keyboard if you prefer. Recording can also be started/stopped automatically or via keyboard: the camera will start recording when a set speed or RPM threshold is exceeded. You simply decide how long after dropping below the selected threshold the video will automatically stop. No More Distorted "Wave Effect" Racing Videos Engine rumble causes vibrations, which are not good for video recording. With the AiM SmartyCam 3 Sport, you'll never again experience that seasick "wave effect" you see when watching in-race videos recorded by generic cameras in a car screaming at 7000 RPM. The AiM SmartyCam 3 Sport is designed for that environment and for those vibrations. "Wave effect" is now just a memory. Generic action cameras are designed to record videos in many different situations, such as skiing or surfing. But in motorsports they tend to record misleading videos, straightening out the view ahead. When on track, this distorted view makes the corners seem to disappear. So, when you review your track performance those videos are useless because the images are distorted. Lenses Designed Precisely for Motorsports Being a camera dedicated to motorsports, AiM SmartyCam 3 Sport features lenses specifically designed to eliminate distortion. The camera is available in two versions: 67º and 84º field-of-view. The former is most suited to in-car, closed-cockpit use. The latter is best used mounted to the exterior of either open- or closed-cockpit cars. Real Time Data Overlay With no driver input, the AiM SmartyCam 3 Sport will automatically overlay all the data you need onto your videos: speed, RPM, lap number, gear shifts and much more. Simply choose the data and the graphic layout you prefer from the huge selection of overlays available. What Kind of Data? AiM SmartyCam 3 Sport overlays data from different sources onto your videos. All this info can be overlayed on videos at each single point of the track. From a GPS: track map and vehicle position, speed, lap- and split-times. From an Aim logger connected to your ECU: RPM, throttle, engaged gear, acceleration, temperatures, pressures, and additional sensor values (if available). AiM RaceStudio 3 Software With RaceStudio 3, the AiM SmartyCam 3 Sport dedicated software, you can add your logo and track map to your videos. There's also a wide choice of graphical objects available, allowing you to choose from a list of pre-determined sets with the same layout, or to combine single objects from different sets.  Now your videos will be truly “yours” in all details, from data to their graphic design. Note: to use the AiM SmartyCam 3 Sport direct-wired to 12V power you will need AiM part no. X08HB2GK0. AiM SmartyCam 3 Sport Video Camera Details: Manufacturer: AiM Sportline Manufacturer part number 67°: XS3S674U Manufacturer part number 84°: XS3S844U Cable length: 4 meters (13 feet) Connector: SmartyCam 712 female Audio: Internal microphone