All

Trac-Com Ear Bud Connector Helmet Clip The Trac-Com Ear Bud Connector Clip was designed to securely attach the Trac-Com 3.5MM earbud connector onto the side of a helmet without the need for drilling. This innovative clip comes in two versions, one for carbon helmets and one for composite helmets, making it a versatile option for a variety of helmet types. While it fits many helmets, please note that it may not work with every model. Trac-Com Ear Bud Connector Clip Features Universal clip that works with most helmets Simple, secure fitment to your helmet No drilling required for installation Available in two versions for either carbon fiber or composite helmets

Stilo ST5 Thick Perimeter Seal Tear-Offs 9-Pack Protect your stilo ST5 helmet shield from rocks, dirt, and debris with these 4 mil (0.1 mm) thick tear-offs. Measuring 4/1000th of an inch thick (the most popular thickness for open-cockpit and harsh environment racers), these tear-offs are perfect for road racing and dirt track use. The perimeter seal system used in these tear-offs provides a tighter fit against your Stilo ST5 visor, preventing dirt, dust, and water from getting between the visor and tear-off stack. This package of 4 mil tear-offs consists of three stacks of three tear-offs each, for nine tear-offs total. Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo Perimeter Seal Tear-Off Pack Details Manufacturer: Stilo Manufacturer part numbers: 3459CP Thickness each: 4 mil (0.1 mm) Gradient/tint: clear Fits all Stilo ST5 helmets Does not fit Stilo ST4F or Stilo ST4W helmets Three stacks of three tear-offs (nine total) Note: These are the thicker tear-offs (4 mil) for your Stilo ST5 series helmet. They are used primarily in open-cockpit road racing and other harsh racing environments.

Stilo Crown Pads Replacement crown pads for Stilo ST5 / ST5.1 helmets help you customize your helmet to provide the perfect fit!

c

Garmin Direct Power Cable is built for performance-minded racers who expect more from their gear. Here's why it belongs in your setup: Garmin Direct Power Cable For use with the Garmin Catalyst Driver Performance Optimizer. It is not recommended to hardwire Garmin automotive products to a 12-volt power source unless using a specifically-designed, Garmin-made accessory with a compatible device. Hardwiring a device in any other way may cause damage. Damage incurred in this way is not covered under warranty.

Stilo ST5 Earcup Set Stilo passive noise attenuating removable earcups. Not for use with helmets equipped with built-in earcup communications. Can be used in conjunction with 3.5mm jack and in-ear buds, or without any communications installed.

Hub-Centric Racing Wheel Spacer Kit for BMW Fits BMW cars with the following: Bolt Pattern: 5 x 120 Center Bore: 72.6 mm Competition Motorsport premium BMW hub-centric racing wheel spacers add a much-needed wider, more aggressive stance to your BMW. The resulting wider track not only enhances aesthetics, it also improves handling and cornering grip. Competition Motorsport wheel spacers are precision CNC-machined from solid forgings of high-strength 7075-T6 aerospace-grade aluminum (stronger than 6061 aluminum). This allows us to skeletonize each spacer, machining out as much material as possible for ultra-light weight while maintaining superior strength. Then we hard-anodize them a deep black for exceptional beauty and durability. The result is the strongest, lightest, most durable spacers for your BMW! BMW Wheel Spacer Details Two hub-centric, 7075-T6 hard anodized BMW wheel spacers (5x120 bolt pattern). Precise CNC machining for perfect fit and balance. Ten high-tensile steel custom wheel bolts included. Optional Titanium wheel bolts for incredibly light weight and high strength. Choose either 14 x 1.25 or 12 x 1.50 bolt threads. Choose between 12, 15, 18, and 20mm spacers to customize the stance of your BMW sports car or sport sedan! Includes ten high-strength steel wheel bolts, or you can reduce unsprung weight with an upgrade to amazingly light and strong Titanium wheel bolts. Our Titanium lug bolts are forged from Ti-6Al-4V aerospace-grade titanium, with rolled threads for ultimate strength. They are incredibly light weight (35% lighter than steel bolts) with higher tensile strength than even high-strength steel.

Titanium Wheel Lug Bolts for BMW Fits All Modern BMWs with 12x1.50 or 14x1.25 Bolts Competition Motorsport Titanium Lug Bolts come in sets of 10 for your BMW. They are machined from aerospace-grade Ti-6Al-4V titanium alloy for superior strength exceptionally light weight (45% lighter than high-strength steel). Competition Motorsport Titanium Lug Bolts feature rolled threads -- never cut -- for for superior strength, precision, and durability. Titanium Bolts in OEM and Plus Lengths For Wheel Spacers OEM lengths are used for cars with no added wheel spacers. Longer sizes are available for those using wheel spacers. Just choose the thickness of your spacers and we'll size the appropriate titanium lug bolts. Titanium Lug Bolt Details Grade 5 Ti-6AL-4V Titanium Alloy: Yield Strength: 128,000 psi Ultimate Tensile Strength: 138,000 psi Shear Strength: 79,800 psi Density: 0.160 lb/in3 Extremely high resistance to corrosion Low heat conductivity. Note: Competition Motorsport Titanium Lug Bolts for BMW are sold in sets of ten (10) lug bolts. Two sets of lug bolts are required for one complete car.

Paragon 3.0" Air Supply Hose (5 Feet) Paragon’s 3” diameter x 5’ length Air Hose is designed to work with most NACA ducts on the market, channeling fresh air from outside the car to feed your Paragon 240 CFM blower. When connected to a Viking Pro Cooler, this provides optimized cool air flow into your helmet for excellent head cooling. Paragon 3.0" Air Supply Hose Details Manufacturer: Paragon Manufacturer part no.: 03-45000 Hose OD: 3.0" Hose length: 5 feet Weight: 2 lbs.

Lotus Emira Rear Caliper Rebuild Kit Been to a few too many track days? If your rear calipers are feeling sticky or weak, this kit replaces the hard-worked piston seals and dust boots to get them operating like new. Fitment Lotus Emira rear caliper. If you are unsure about compatibility, compare your caliper’s piston count and dimensions to your factory service information. Refresh your rear braking performance with a precise, track-tested kit Each kit services one front caliper and includes new piston seals and high-temperature dust boots built to our spec. Pair rebuilt calipers with titanium pad shields to reduce heat transfer and extend service intervals. CCRK2-388 Features One kit services one front caliper Includes piston seals and dust boots made to our specifications Designed to withstand high brake temperatures common on track Restores caliper feel, consistency, and pad release Recommended with titanium pad shields for added heat protection What’s included Piston seals and dust boots sufficient to rebuild one Lotus Emira rear brake caliper. Fitment Lotus Emira front caliper. If you are unsure about compatibility, compare your caliper’s piston count and dimensions to your factory service information. Installation notes Clean all components thoroughly; avoid scratching piston surfaces Use appropriate brake assembly lube and fresh DOT-rated brake fluid specified by the vehicle manufacturer After assembly, bleed the system and verify a firm, consistent pedal Follow torque specs and procedures in the factory service manual Lotus Emira Front Caliper Rebuild Kit CCRK2-388 FAQs Does one kit cover both front calipers? No. One kit services one caliper. Order two kits to service both rear calipers. How do I know my caliper seals need replacement? Common signs include uneven pad wear, dragging brakes, fluid seepage, a soft pedal, or pistons that don’t retract smoothly after braking. Can I install this at home? Experienced DIYers can rebuild calipers with the right tools and a service manual. If you are unsure, consult a professional technician. Do I need new brake fluid after the rebuild? Yes. Always use fresh fluid that meets the manufacturer’s specification and fully bleed the system after service. Will titanium pad shields really help? They reduce heat transfer from pads to pistons, helping protect seals and fluid, especially during repeated high-temperature track use. Ready to restore consistent braking performance? Add the Lotus Emira Rear Caliper Rebuild Kit to your cart, and consider titanium pad shields to keep your system cooler on track.

Lotus Emira Rear Caliper Rebuild Kit Been to a few too many track days? If your rear calipers are feeling sticky or weak, this kit replaces the hard-worked piston seals and dust boots to get them operating like new. Fitment Lotus Emira rear caliper. If you are unsure about compatibility, compare your caliper’s piston count and dimensions to your factory service information. Refresh your rear braking performance with a precise, track-tested kit Each kit services one rear caliper and includes new piston seals and high-temperature dust boots built to our spec. Pair rebuilt calipers with titanium pad shields to reduce heat transfer and extend service intervals. CCRK2-388 Features One kit services one rear caliper Includes piston seals and dust boots made to our specifications Designed to withstand high brake temperatures common on track Restores caliper feel, consistency, and pad release Recommended with titanium pad shields for added heat protection What’s included Piston seals and dust boots sufficient to rebuild one Lotus Emira rear brake caliper. Fitment Lotus Emira rear caliper. If you are unsure about compatibility, compare your caliper’s piston count and dimensions to your factory service information. Installation notes Clean all components thoroughly; avoid scratching piston surfaces Use appropriate brake assembly lube and fresh DOT-rated brake fluid specified by the vehicle manufacturer After assembly, bleed the system and verify a firm, consistent pedal Follow torque specs and procedures in the factory service manual Lotus Emira Rear Caliper Rebuild Kit CCRK2-388 FAQs Does one kit cover both rear calipers? No. One kit services one caliper. Order two kits to service both rear calipers. How do I know my caliper seals need replacement? Common signs include uneven pad wear, dragging brakes, fluid seepage, a soft pedal, or pistons that don’t retract smoothly after braking. Can I install this at home? Experienced DIYers can rebuild calipers with the right tools and a service manual. If you are unsure, consult a professional technician. Do I need new brake fluid after the rebuild? Yes. Always use fresh fluid that meets the manufacturer’s specification and fully bleed the system after service. Will titanium pad shields really help? They reduce heat transfer from pads to pistons, helping protect seals and fluid, especially during repeated high-temperature track use. Ready to restore consistent braking performance? Add the Lotus Emira Rear Caliper Rebuild Kit to your cart, and consider titanium pad shields to keep your system cooler on track.

Alpinestars KX v2 Karting Balaclava Alpinestars KX v2 Balaclava Summer is extremely lightweight and thin, while being incredibly soft to the touch for greatly enhanced comfort when wearing a full face helmet, and has extensive mesh panels on the rear for optimum levels of breathability.  

Sparco Martini Racing Water Bottle The legendary partnership between Sparco and Martini Racing returns with the Sparco Heritage Collection. Inspired by one of motorsport's most iconic liveries, the Sparco Martini Racing Aluminum Water Bottle combines timeless racing heritage with everyday practicality. Featuring authentic Martini Racing graphics and a bold Sparco logo, this premium bottle is perfect for race weekends, track days, travel, and daily use. Classic Motorsport Heritage Meets Everyday Functionality Celebrating the unforgettable Sparco and Martini Racing collaboration that became famous during the World Rally Championship era of the 1980s, this lightweight aluminum bottle delivers both style and performance. The leak-proof screw-top closure keeps beverages secure while the durable aluminum construction makes it ideal for life at the track, in the paddock, or on the go. Sparco Water Bottle Martini Racing Features Official Sparco Heritage Collection design Classic Martini Racing graphics printed on one side Bold Sparco logo featured on the reverse side Lightweight aluminum construction Leak-proof screw-top closure Durable design for daily use Ideal for motorsport enthusiasts, travel, and track days Inspired by the historic Sparco and Martini Racing partnership Perfect for Track Days, Racing Events, and Daily Use Whether you're spending a weekend at the racetrack, working in the shop, traveling, or simply showing your appreciation for motorsport history, the Sparco Martini Racing Aluminum Water Bottle offers a stylish and practical hydration solution. Sparco Water Bottle Martini Racing Frequently Asked Questions What collection is this water bottle part of?This bottle is part of the Sparco Heritage Collection, which celebrates iconic designs and partnerships from Sparco's motorsport history. Does the bottle feature official Martini Racing graphics?Yes. The bottle includes classic Martini Racing graphics on one side and a Sparco logo on the reverse side. Is the cap leak-proof?Yes. The screw-top closure is designed to provide a secure, leak-resistant seal during transport and everyday use. What material is the bottle made from?The bottle is constructed from lightweight and durable aluminum for long-lasting performance. Is this suitable for track day use?Absolutely. The lightweight design and secure closure make it an excellent companion for race weekends, track days, paddock use, and travel. Can this be used as an everyday water bottle?Yes. It is designed for both motorsport enthusiasts and everyday users who appreciate classic racing heritage. Celebrate one of motorsport's most iconic partnerships with the Sparco Martini Racing Aluminum Water Bottle. Shop now at Competition Motorsport for premium Sparco accessories, apparel, race gear, and motorsport lifestyle products.

AiM Sports 719 Extension Cables Add the appropriate length AiM Sports 719 Extension Cable to your AiM data set-up to retrieve exactly the information you need, maximizing your data acquisition and taking your racing to the next level! Use these extension cables to connect additional sensors to the following AiM Sports dashes: MXG MXS MXL2 MXL Strada/Pista/Pro 05 Part numbers: V02PCB05B – cable length 0.5 meter (1.6 feet) V02PCB10B – cable length 1.0 meter (3.3 feet) V02PCB15B – cable length 1.5 meters (4.9 feet) V02PCB20B – cable length 2.0 meters (6.6 feet) V02PCB25B – cable length 2.5 meters (8.2 feet) V02PCB30B – cable length 3.0 meters (9.8 feet) Note: Cables typically take 3 to 5 business days to ship.

Paragon 4.0" Blower Filter Housing Fitting Paragon’s 4” Blower Filter Housing Fitting is custom made for connecting Paragon’s 3” Air Hose to the 4" inlet of Paragon’s 240 CFM Air Blower. The Paragon 4” Blower Filter Housing Fitting is made to house Paragon’s Blower Air Filter Screen and Paragon’s Blower Air Filter (each sold separately).