All

AiM Sports Solo2 Direct Power Cable 5-Pin 712 Male Add this direct power cable to your vehicle and never worry about charging your AiM Solo2 before or during an event again. This cable allows you to cleanly hard-wire your Solo2 to your car’s 12 VDC power system, keeping your lap timer and data logger powered continuously without relying on a cigarette lighter or external battery packs. Permanent Power for Your Solo2 Data Logger The AiM Sports Solo2 Direct Power Cable is designed for drivers who want a clean, reliable installation. By connecting directly to your vehicle’s 12-volt system, the Solo2 stays powered anytime the car is on, ensuring uninterrupted data logging during track days, autocross, or race sessions. Key Features 5-pin 712 male connector compatible with AiM Solo2 devices Direct-wire connection to vehicle 12 VDC power Eliminates the need for cigarette lighter charging cables Prevents mid-session battery loss or shutdowns Clean, professional installation for race or track cars Compatibility Designed specifically for the AiM Solo2 lap timer and data logger using a 5-pin 712 male connector. AiM Sports Solo2 Direct Power Cable FAQs Does this cable eliminate the need to charge my Solo2? Yes. Once installed, the Solo2 receives power directly from the vehicle, so charging before or during events is no longer necessary. Can this be installed in a street car? Yes. The cable can be installed in both street and track cars as long as a 12 VDC power source is available. Does this cable turn the Solo2 on and off automatically? The Solo2 will receive power whenever the vehicle’s electrical system is active, depending on how the cable is wired. Is professional installation required? Professional installation is recommended for the cleanest and safest wiring, but experienced DIY installers can also handle the installation. If you’re tired of charging cables, dead batteries, or unreliable power during events, this direct power solution keeps your AiM Solo2 ready every time you hit the track.

Schuberth SP1 Individual Top Vent Scoops Individual vent scoops direct cooler air into the Schuberth SP1 Carbon helmet's top vents. Can be purchased individually or in packs of three or six.      

Antigravity SC-2 Super-Charger Compact. Smart. Always Ready. The Antigravity SC-2 Super-Charger is a next-generation 2-amp charger and maintainer for lithium (LiFePO4/LFP) and lead/acid batteries. Engineered with advanced microchip-controlled technology, it delivers safe, precise charging to extend battery life and maintain peak performance. Compact and easy to use, the SC-2 is ideal for small-capacity batteries up to 60Ah in motorcycles, powersports vehicles, cars, and more. Whether you’re storing your bike for the off-season or maintaining a lawn tractor that only runs occasionally, the SC-2 keeps your batteries fully charged and ready to start at a moment’s notice. Key Features & Benefits 2-Amp Smart Charging: Perfect for small-capacity batteries from 3Ah to 60Ah. Multi-Chemistry Support: Works with Lithium (LiFePO4/LFP) and Lead/Acid (AGM, STD, GEL, WET, FLA, VRLA) batteries. Multi-Voltage Capability: Charges 6V & 12V lithium and 12V lead/acid systems. Advanced LCD Display: Shows real-time voltage, capacity, and charge status. Recondition Mode: Restores performance of aging lead/acid batteries (not for lithium). Automatic Winter Mode: Adjusts charging profile for cold temperatures. Complete Safety Protection: Overcharge, reverse-polarity, and short-circuit protection built in. Simple One-Button Operation: Hassle-free use for quick setup and maintenance. Durable & Compact: IP65-rated weather-resistant case for shop or garage use. Universal Compatibility: Ideal for motorcycles, ATVs, UTVs, cars, trucks, RVs, boats, tractors, and mowers. Specifications Input Voltage 110–120V AC ~ 50–60 Hz (US plug) Output Voltage 6V / 12V DC Max Output Current 2A Battery Capacity Range 3Ah – 60Ah Recondition Mode 16.5V DC / 1.5A (lead/acid only) Operating Temperature -4°F to 104°F (-20°C to 40°C) Protection Class Class II, IP65 Dimensions 6.2" × 3.3" × 1.8" Warranty 3 years UPC 711811704895 SKU AG-BC-SC-2 Included in the Box SC-2 Super-Charger unit Battery clamp leads Ring terminal pigtail lead User manual The SC-2 includes an attached 6-ft power cable and 5-ft SAE charging lead, plus two 16-inch interchangeable accessories (clamps and pigtail) that connect via the SAE connector. Why Choose the SC-2? Unlike basic trickle chargers, the SC-2 delivers precise microprocessor-controlled charging to ensure optimal performance and extended battery life. It’s purpose-built for smaller-capacity batteries, providing gentle maintenance charging to prevent sulfation, parasitic drain, and premature failure. Backed by Antigravity’s 3-year warranty, the SC-2 is the smart choice for keeping your garage of vehicles fully powered and always ready to ride, drive, or work.

Paragon 4.4AH Li-Ion Arctic Wolf/Fox Battery Paragon’s Arctic Wolf/Fox Battery is a 4.4 Amp-hour lithium-ion battery designed for use with your Paragon Arctic Wolf or Arctic Fox Cooler Bag. The Arctic Wolf/Fox 7.4V battery provides up to 132 minutes of continuous run time with each full charge. Paragon Arctic Wolf/Fox Battery Charger sold separately. Paragon Li-Ion Battery For Arctic Wolf/Fox Details Manufacturer: Paragon Manufacturer part no.: 02-29400 Battery voltage: 7.4V Battery amp/hours: 4.4 AH Charger included: no Weight: 1 lb.

Motorola Antenna Adapter For BPR40/CP185/CP200 Antenna Adapter for Motorola BPR40, CP200 and CP185 Portable Radio To BNC Antenna Adapter. Use this to connect your 1/4 turn BNC antenna to the fully threaded adapter on the back of your Motorola BPR40, CP200 or CP185 Motorola Antenna Adapter For BPR40/CP185/CP200 Details Manufacturer: Motorola Manufacturer Part Number: PMDN4041BR Use: Adapt BNC Antenna to Motorola BPR40 / CP185 / CP200 Portable Radios Antenna end: BNC 1/4 turn

Motorola Antenna Adapter For Digital Base Units Motorola Base Unit To BNC Antenna Adapter. Use this to connect your 1/4 turn BNC antenna to the fully threaded adapter on the back of your Motorola Base Unit radio. Motorola Antenna Adapter For Digital Base Units Details Manufacturer: Motorola Manufacturer part number: 5880367B23

Stilo ST6 Helmet Aero Kits These aero kits from Stilo provide all the downforce needed for open-cockpit drivers to reduce helmet lift. They are especially popular for IndyCar, Formula Atlantic, and Radical drivers. Choose between front and rear aero, or both for the best performance!      

Alpinestars Tech-1 K Race v2 Pure Karting Gloves Ready to feel like a pro on the track? Slip into the Alpinestars Tech-1 K Race v2 Pure Karting Gloves and watch your driving game go from zero to hero. These lightweight gloves aren’t just about looking cool (though, let’s be real—they do); they’re about making every lap smoother, faster, and more controlled. Designed for the karting and racing enthusiast who demands nothing less than peak performance, these gloves offer durability, grip, and comfort in one sleek package. Alpinestars Tech-1 K Race v2 Pure Karting Gloves Features Lightweight Polyester-Mesh Construction: Who needs sweaty hands at the wheel? The Tech-1 K Race v2’s lightweight design keeps your hands cool and comfy, even on those hot race days. Durability Meets Comfort: Bonded polyester mesh and synthetic suede palms create an unbeatable combo. You get enhanced grip, feel, and comfort without sacrificing toughness. Mesh & Lycra Combo Fingers: Need flexibility AND airflow? No problem. Mesh on one side and Lycra on the other means your fingers will stay nimble while getting plenty of ventilation. Pre-Curved Fingers: Because gloves should fit like… well, a glove. The pre-curved design reduces material bunching, so you’re always in control. Silicone Surface Treatment: Say goodbye to slippery fingers. Silicone on the palms and fingers ensures superior grip and control, so you’re always one step ahead. Touchscreen Compatibility: Forgot to snap a pic of that epic lap? No sweat. With touchscreen-compatible thumbs and index fingers, you can whip out your phone without ever removing your gloves. Elasticated Wrist for Easy Fit: Who has time to wrestle with a tight cuff? The 180° elasticated wrist lets you slide these on in a snap while keeping them secure during your entire run. Benefits that’ll make you feel like a champion: Imagine this: You're hitting those corners, feeling the perfect balance between grip and comfort. With the Alpinestars Tech-1 K Race v2 gloves, you can feel every turn, every throttle adjustment, like you're part of the kart itself. The lightweight build ensures your hands won't fatigue, while the pre-curved fit means you’re not fighting against the glove, just your opponents. Alpinestars Tech-1 K Race v2 Pure Karting Gloves Specifications Material: Lightweight polyester mesh, synthetic suede palm Grip: Ergonomically designed silicone print Cuff: Gauntlet cuff with 180° elasticated wrist Touchscreen compatibility: Yes Fit: Pre-curved fingers for reduced bunching Ventilation: Mesh and Lycra fourchettes for optimal airflow Weight: Featherlight for long-lasting comfort Alpinestars Tech-1 K Race v2 Pure Karting Gloves Size Chart Alpinestars Tech-1 K Race v2 Pure Karting Gloves FAQs Q: Are the TECH-1 K Race V2 gloves FIA or CIK certified?A: No, these gloves are not FIA 8877-2022 or CIK-FIA certified, making them ideal for recreational or club-level racing where certification is not required. Q: What type of grip do they provide?A: The gloves feature a synthetic suede palm with silicone grip zones for enhanced steering feel and control. Q: Do they use external or internal seams?A: These gloves have external seams, reducing internal pressure points for better comfort and feel. Q: Are they good for long stints or endurance sessions?A: Yes. The combination of lightweight materials and ergonomic fit helps reduce hand fatigue during long sessions. Q: Are they breathable?A: Absolutely. The stretch upper allows for excellent airflow and moisture management. Q: Are these gloves suitable for youth racers?A: The TECH-1 K Race V2 is available in a wide range of sizes, including smaller sizes suitable for junior drivers. Q: How do they compare to the TECH-1 KX V3 gloves?A: The Race V2 offers great value and comfort, while the KX V3 is a premium-level glove with advanced materials and FIA 8877-2022 certification.

Maglock Air Connector Kit Maglock Air hose and air hose connector is sold separately.  If you don't already have a Maglock system, you need to order MLA-1000 plus the desired length hose.  This helmet kit only works if you already have a MLA-1000 kit. This kit attaches to your helmet's ventilation inlet to create a magnetic connection point for your Maglock air hose (sold separately). This Maglock magnetic hose connection greatly reduces neck fatigue during use and does not come loose in high-G or high impact environments. Yet it allows super-easy connection and disconnection from your air supply when needed. What's included: Maglock Air Connector (helmet side) Maglock Air dust cap Maglock visor sticker Tool kit

Alpinestars Race v4 Nomex Socks Alpinestars Race v4 Nomex racing underlayer socks are lightweight, comfortable, durable, and ergonomically designed to meet the demands of the world’s top drivers. Certified to FIA homologation standards, these socks offer excellent protection from fire and heat transfer, featuring flat seams for long-lasting comfort. Certified to the new FIA 8856-2018 homologation standard. Alpinestars Race v4 Nomex Sock Size Chart

Shock Doctor Eject Helmet Removal System Helps reduce the risk of post-crash neck and spine injuries! The Shock Doctor Eject emergency helmet removal system consists of a small inflatable bag worn inside the helmet. In the event of an incident, safety workers or EMTs inflate the bag, which safely pulls your helmet off without placing any strain on the neck. The bag weighs about one ounce and will not affect the fit of your helmet. Required by AMA, IRL, and IMSA.

HANS Sport 3 Tether Kits Ensure the safety and functionality of your HANS Sport 3 with our replacement tether kits. Designed for use with Sliding tethers and post anchors, these kits allow you to easily swap out your existing tether for a longer or shorter one. In the event of an incident, it is crucial to have a reliable and secure tether in place, and our HANS Sport 3 Tether Kits provide just that. Made with high-quality materials, these kits are built to withstand the demands of competitive motorsports. Keep your HANS Sport 3 in top condition with our reliable and durable tether kits.

OMP KS-4 ART Kart Racing Gloves The OMP KS-4 ART Gloves combine lightweight comfort, responsive grip, and aggressive graphic styling for kart racers looking to improve steering precision and overall control. Designed for competitive and recreational karting, the KS-4 ART features internal seams and a silicone ultragrip palm to enhance feel during long sessions behind the wheel. Enhanced Grip and Steering Precision for Kart Racing The KS-4 ART glove is engineered to maximize steering input and driver comfort across changing track conditions. A lightweight palm construction improves feedback through the steering wheel, while the silicone rubber grip pattern helps maintain control under heavy cornering and braking loads. Internal seams reduce pressure points and irritation, helping drivers stay comfortable during extended races and practice sessions. OMP KS-4 ART Kart Racing Gloves Features • Silicone rubber ultragrip palm for improved steering control • Internal seams reduce friction and improve comfort • Lightweight construction enhances steering feel and responsiveness • Straight wrist cuff with elastic closure for secure fitment • Available in multiple printed graphic designs • Offered in adult and youth sizing options • Designed for karting competition and track-day use OMP KS-4 ART Kart Racing Gloves FAQs Are the OMP KS-4 ART gloves FIA approved? No. The KS-4 ART gloves are designed specifically for karting use and are not FIA homologated for auto racing applications requiring fire-resistant gloves. What type of grip does the KS-4 ART glove use? The gloves use a silicone rubber ultragrip palm pattern designed to improve steering wheel traction and control in dry driving conditions. Do the internal seams improve comfort? Yes. Internal seam construction helps reduce external pressure points and friction, improving comfort and steering feel during long sessions. Are youth sizes available for the KS-4 ART gloves? Yes. The KS-4 ART gloves are available in both adult and kids sizing ranges. What types of karting are these gloves suited for? The KS-4 ART gloves work well for sprint karting, rental kart racing, club racing, and recreational karting environments. Do the gloves have a secure wrist closure? Yes. The gloves feature a straight wrist design with an elastic closure to help maintain a secure and comfortable fit. The OMP KS-4 ART Kart Racing Gloves deliver lightweight comfort, dependable grip, and responsive steering feel for drivers competing at any level of karting. Contact Competition Motorsport at sales@competitionmotorsport.com or 844-438-7244 for sizing and availability. OMP KS-4 ART Kart Racing Gloves Size Chart

Garmin Tube Mount Kit Capture every lap with confidence using the Garmin Tube Mount Kit, engineered to securely attach your Garmin camera to a variety of round surfaces like roll cages, tubing, and frame bars. Whether you're recording high-speed laps or reviewing driving data, this mount ensures your footage stays stable—no matter the intensity of your race day. Designed for motorsport environments, the Garmin Tube Mount Kit is compatible with a wide range of Garmin action cameras and offers a rugged, low-profile solution for professional-grade video capture during track days, endurance events, and racing competitions. Key Features Compatible with most Garmin VIRB action cameras Fits round tubing 0.75” to 1.5” (19–38 mm) in diameter Perfect for mounting to roll cages, seat headrest bars, or frame rails Durable, vibration-resistant construction for stable video recording Includes mount, Allen wrench, and anti-slip inserts Whether you're a club racer, HPDE enthusiast, or professional driver, the Garmin Tube Mount Kit gives you the flexibility and durability you need to record every moment of your performance with precision.

Sparco Martini Stripes T-Shirt This isn’t just a T-shirt — it’s a badge of motorsport heritage. The Sparco Martini Stripes T-Shirt wraps you in the legendary Martini Racing colors, blending comfort with iconic paddock energy. Whether you're in the garage or watching from the stands, this is the tee that shows you live and breathe racing. Bold Martini Racing Style Meets Everyday Comfort Styled with the unmistakable Martini Racing stripes across the chest, this shirt makes a statement without saying a word. It's built with a premium cotton blend for a lightweight, athletic feel that’s right at home under a race suit or out to dinner after a track day. Features Iconic Martini Racing stripes printed across the front Ultra-soft stretch jersey (95% cotton, 5% elastane) Available in white, navy, or black Sizes Small–XXX-Large (runs small; consider sizing up) Designed by Sparco, trusted in racing worldwide Sparco Martini Stripes T-Shirt FAQs: Does this T-shirt shrink in the wash? It may shrink slightly if dried on high heat. We recommend machine washing cold and air drying for best results. Is this an official Martini Racing licensed product? Yes, this is officially licensed by Martini Racing through Sparco. How does the sizing compare to US sizes? It runs smaller than typical US fit. We recommend going one size up. Is it suitable for hot days at the track? Absolutely. The light stretch jersey fabric is breathable and perfect for warm conditions. Wear your love for racing with the Sparco Martini Stripes T-Shirt. Get yours now and rep the legacy.