Racing Radios
Racing Radio Velcro Earpiece Mount Tab Kit
$15.00
Racing Radio Earpiece Mount Tab Kit
Racing Radio Earpiece Mount Tab Kit uses a hourglass shaped tab to wrap around your earbud jack that secures to a matching tab (included) that you mount inside your helmet against the inside shell. This kit allows for securely mounting your Racing Radios ear bud jack to your helmet with no drilling.
Racing Radio Earpiece Mount Tab Kit Details:
Manufacturer: Racing Radios
Manufacturer part number: VELCRO-TAB
Racing Radios
Racing Radio Replacement Foam for Earbuds
$15.00
Racing Radio Replacement Foam for Ear Buds
For the purpose of hygiene and safety, this product is not eligible for return.
If you have a set of in-ear buds on which the foam is starting to get worn and/or dirty, this kit is the direct replacement to easily bring your earbuds back to the like-new dB lowering, comfortable fit once again.
How to replace the foam on the end of your current earpieces:
Cut the old foam earpieces using a new razor blade - slicing like a banana without cutting the wire, transducer, or sound tube
Peel off the foam and use your finger nail or the edge of tweezers to remove the remaining glue
Insert the tweezers into the foam hole and stretch the hole from the flat side of the foam for 30 seconds
Slide the transducer into the elongated hole until the sound tube is near the end of the round part and let sit for 1 minute
Put a micro dot of super glue on the wire to foam connection on flat side and you are done
Racing Radio Replacement Foam for Ear Buds Details
Manufacturer: Racing Radios
Manufacturer part number: CE31/A-FOAMS-COVERS
Quantity in kit: two
Paragon
Paragon Everlast Ice
$13.00
Paragon Everlast Ice
Paragon’s Everlast Ice allows for longer cooling periods when added to ice and water in any Paragon cooler or Paragon cooler bag. Paragon Everlast Ice should be kept in a freezer until you're ready to use it. Compatible with non-Paragon coolers. Paragon Everlast Ice is the perfect solution for keeping the water in your Paragon Viking cooler ice-cold at the track. No more running to the store for more ice!
Paragon Everlast Ice Details
Manufacturer: Paragon
Weight: 1 lb.
Reusable and economical
Leakproof, non-toxic gel
Long lasting cold
Efficient transfer of energy
Paragon
Paragon O-Ring Pack
$13.00
Paragon O-Ring Pack
The Paragon O-Ring Pack contains six new O-rings to replace a dry, cracked, or torn O-ring on any Paragon male connector.
Molecule
Molecule Rain Repel Spray 4oz
$13.00
Molecule Rain Repel Spray 4oz
Improves visibility in wet weather. Easy to apply formula repels rain and water. For use on windshields, visors, goggles or windscreens.
Molecule Rain Repel Spray Details:
Manufacturer: Molecule Labs
Manufacturer part number: MOL-MLHRR-41
Size: 4oz
Apply to visors, goggles, windshields or windscreens and watch rain fly off
Spray on, allow slight haze, reapply Molecule RAIN REPEL to ensure uniform coverage
Wipe final haze with dry cloth and watch rain easily keep clear
Environmentally friendly, biodegradable and non-hazardous
Designed to increase the surface tension of water to quickly shed large beads from visors. As rain falls, it sticks to the microscopic edges on the surface of visors or screens. Rain Repel reduces the friction between water droplets and the surface to keep vision clear.
Pro Tip: Do not use any Molecule shield product on your Stilo visors as it is not compatible with the Stilo special anti-fog coating.
Competition Motorsport
Porsche Alignment Camber Shims (992 Front )
from $13.00
Anodized Aluminum Front Camber Shims for Porsche 992 GT3/GT3RS/Cup Car
Precision laser-cut from 6061-T6 aluminum and anodized for durability, these shims are used to adjust camber by changing length of your Porsche 992 GT3/GT3RS/Cup Car OEM or similarly configured front lower control arms (such as RSS units). Thickness in millimeters is silk screened on each shim for easy sorting.
Available in 1mm, 3mm, and 5mm thickness. For reference, one degree of negative camber is approximately a 5mm shim.
You're Going to Need A Bunch, Might As Well Save!
Enthusiast Pack (two of each shim) save 10%
Racer Pack (four of each shim) save 15%
Team Pack (eight of each shim) save 20%
A Note About Shim Fitment
These shims fit the FRONT two-piece Porsche lower control arms that come standard on the 992 GT3, GT3RS, and Cup Car. They are typically used in pairs or in multiple-shim combinations.
For the appropriate rear shims for the 992, use these shims.
Competition Motorsport
Porsche Alignment Camber Shims (991/992 Rear)
from $13.00
Anodized Aluminum Porsche GT3 Rear Control Arm Shims
For Porsche 991 or 992 Two-Piece "GT3" Rear Lower Control Arms
Save 60% vs OEM shims!
Precision laser-cut from 6061-T6 aluminum and anodized for durability, these shims are used to adjust camber by changing length of your Porsche OEM or similarly configured lower control arm (such as RSS units). Thickness in millimeters is silk screened on each shim for easy sorting.
Available in 1mm, 3mm, and 5mm shim thickness. For reference, one degree of negative camber is approximately 5mm shim.
Might As Well Save Money With A Pack Of Shims
Enthusiast Pack (two of each shim) save 10%
Racer Pack (four of each shim) save 15%
Team Pack (eight of each shim) save 20%
A Note About Shim Fitments
These shims fit REAR two-piece Porsche lower control arms (LCA) found in the 991 and 992 GT3 and GT3 RS. They are typically used in pairs or in multiple-shim combinations.
The front LCA of the 991 uses these shims. The front of the 992 uses these shims.
Molecule
Molecule Anti-Fog Visor Spray 4 oz.
$13.00
Molecule Anti-Fog Spray
Molecule Anti-Fog spray improves visibility and is designed specifically to inhibit fog causing moisture on the interior of your helmet visor shield. Apply to the inside surface of visors, goggles, wind screens, etc. to guard against foggy distortion.
Features & Benefits
Cleans and polishes helmets, visors in easy application
Safely removes bugs, oils, dirt & grime
Recommended for use on all gloss finishes
Reduces fogging & improves visibility
Cleans surface of dirt & chemicals
Recommended for helmet visors, goggles and wind screens
Caution: Not for use on Stilo ST5 helmet visors.
Molecule
Molecule Helmet Cleaner Polish 4 oz.
$13.00
Molecule Cleaner Polish for Helmets
Molecule Cleaner Polish is designed to keep exterior of helmets clean, shiny and protected in a simple application. Safe to use on visors and gloss finishes, simply spray and wipe off.
Features & Benefits
Cleans and polishes helmets, visors in easy application.
Safely removes bugs, oils, dirt & grime.
Recommended for use on all gloss finishes.
Safe to use on visors and gloss finishes, simply spray and wipe off.
Cleans and polishes helmets, visors in easy application Safely removes bugs, oils, dirt & grime Recommended for use on all gloss finishes.
Molecule
Molecule Visor Cleaner and Rain Repel 4 oz.
$13.00
Molecule Visor Cleaner and Rain Repel Spray
Molecule Visor Cleaner safely cleans helmet exterior visors while improving visibility in wet weather with Rain Repel technology. Easy to apply formula, also repels rain and other liquids from sticking to the visor. For use on visors, goggles and wind screens.
Features & Benefits
Safely remove bugs, oils, dirt & grime from visor in one easy step
Water quickly beads & clears to improve wet weather visibility
Can be applied to helmet visors, goggles & wind screens
Convenient 4-oz. spray bottle is easy to throw in your helmet bag
Molecule
Molecule Matte Helmet Detailer
$13.00
Molecule Matte Helmet Detailer
Specially formulated to keep the low luster of matte helmets intact and maintain a uniform flat finish.
Product overview
Features
Cleans and details matte finish helmets in one easy step.
Safely removes bugs, oils, dirt and grime.
Specially formulated to keep the low luster of matte helmets intact and maintain a uniform flat finish.
Cleans and details matte finish helmets in one easy step Safely removes bugs, oils, dirt and grime Apply and allow to dry .
Competition Motorsport
Porsche Alignment Camber Shims (Original Shape)
from $13.00
Anodized Aluminum Porsche GT3 Control Arm Shims
Porsche GT3 And Similar Two-Piece Lower Control Arms
Precision laser-cut from 6061-T6 aluminum and anodized for durability, these shims are used to adjust camber by changing length of your Porsche OEM or similarly configured lower control arm (such as these RSS units). Thickness in millimeters is silk screened on each shim for easy sorting.
Available in 1mm, 3mm, and 5mm thickness. For reference, one degree of negative camber is approximately a 5mm shim.
You're Gonna Need A Bunch, Might As Well Save Money
Enthusiast Pack (two of each shim) save 10%
Racer Pack (four of each shim) save 15%
Team Pack (eight of each shim) save 20%
A Note About Fitments
These fit all two-piece Porsche lower control arms (LCA) (except 991 rear and 992 front and rear, which use a different shim shape). LCA shims are typically used in pairs or in multiple-shim combinations. These shims also fits 981 and 718 Cayman models equipped with the appropriate two-piece LCAs.
Competition Motorsport Performance shims can be used on the front and/or rear of any Porsche 986/987/996/997 fitted with two-piece lower control arms (commonly referred to as "GT3" control arms).
These shims only fit the FRONT lower control arm of the Porsche 991 with two-piece lower control arms. The rear require a different shim shape.
Schroth
Schroth Bolt- or Snap-in Brackets
from $11.00
Schroth Bolt-In or Snap-In Brackets
B24 Bracket
The B24 is the most economical bolt-in bracket offered. It's a heavy-duty steel bracket that cannot be bent to aid installation. Dimensions are 5mm thick, 69 x 46mm with a 13mm (1/2") bolt hole. There is a slight 10° bend so that this bracket can be bolted directly to a flat surface and leave room for webbing wrapped into it.
It can be sewn in or wrapped with an LV4 (recommended), LV10 or LV11. FIA and SFI 16.1/16.5 approved. Cannot be used for a lap belt bolt-in bracket under SFI 16.5. Three-inch webbing must be folded at the edges for use with this bracket.
B15 Bracket
The B15 snap-in bracket snaps to eyebolts or bolt-in bracket B23B. It can be sewn into 2" and 3" webbing, or wrapped with an LV4, LV10 or LV11. When wrapped into 3" webbing, one must fold the edges of the webbing in and use an LV7. Can be used on any point of a harness, including lap belt, sub strap, or shoulder belt. FIA and SFI 16.1 approved.
Competition Motorsport
Competition Motorsport Decals (4-pack)
from $9.00
Competition Motorsport Decals (pack of 4 in the size selected)
Sizes Available: 6"x1.5" / 9"x2" / 12"x3"
Show your support for Competition Motorsport and grab some high-quality, fade-resistant Competition Motorsport decals. They're perfect for cars, trucks, trailers, laptops, and the walls at Siebkens (if you don't understand this joke, you owe it to yourself to go to Elkhart Lake and enjoy a steak sandwich at Siebkins while reading the walls for a while).
Competition Motorsport
CMS Transponder Decal
$5.00
CMS Transponder Decal with Write-On Area
Some sanctioning bodies require this decal to mark the location of your transponder. Our 3 inch diameter red-on-white "T" decal has a special area for you to write in your transponder number, if desired.
Just write your transponder number using a ball point pen or Sharpie and you're good to go. Make sure the ink is waterproof if the decal will be exposed to the elements. If in doubt, we suggest you protect the write-on area with clear tape to keep the transponder number from smearing or washing away.
3" diameter
Die-cut vinyl decal
Competition Motorsport
CMS Tow Decal
$5.00
CMS Tow Decal
All professional sanctioning bodies require tow hooks on race cars if the roll cage is not easily accessible, and the tow hooks must be clearly marked for quick identification by safety crews.
Tow Decal Details
3" by 2"
Die-cut vinyl decal
