all

OMP ONE EVO FX Gloves The OMP ONE EVO FX Gloves are professional-level racing gloves developed for drivers who demand precise steering feedback, dependable grip, and lasting comfort during demanding competition. Their advanced pre-curved shape supports a natural driving position, helping reduce material bunching and unnecessary hand fatigue during extended sessions. Lightweight honeycomb fabric promotes airflow throughout the glove, while strategically positioned silicone grip zones improve steering control without sacrificing sensitivity. External finger seams reduce pressure points, and the internally stitched thumb provides refined feel when operating steering-wheel buttons, rotary controls, and paddle shifters. Ergonomic Construction for Natural Steering Control The ONE EVO FX is shaped around the position a driver’s hands naturally assume on the steering wheel. Its pre-curved fingers and palm reduce resistance when closing the hand, allowing the driver to maintain a secure grip with less effort. This ergonomic construction minimizes excess material across the palm and fingertips, helping preserve tactile feedback while reducing fatigue during long races, endurance stints, and repeated high-load steering inputs. Directional Silicone Grip Zones Strategically arranged silicone sections provide traction where the glove makes the most contact with the steering wheel. The directional grip pattern helps resist unwanted hand movement during cornering, braking, and rapid steering corrections. Rather than covering the entire palm with a heavy reinforcement layer, the focused silicone layout maintains a direct connection with the wheel and preserves the sensitivity needed for precise vehicle control. External Finger Seams for Reduced Pressure External seams move potentially irritating stitching away from the inside of the fingers. This construction reduces pressure points and improves comfort during extended periods behind the wheel. The smoother internal finger area also helps the glove conform more closely to the hand, limiting distractions caused by bulky seams or excess material. Internally Stitched Thumb for Enhanced Feedback The thumb uses an internal seam configuration to improve sensitivity and control around modern steering-wheel equipment. This construction gives the driver a more precise feel when using push buttons, switches, rotary controls, and paddle-shift systems. Combining external finger seams with an internally stitched thumb allows OMP to optimize different areas of the glove for their specific driving functions. Breathable Honeycomb Fabric Lightweight honeycomb fabric across the outer glove encourages airflow and helps manage heat inside the cockpit. The breathable construction is especially beneficial during endurance competition, warm-weather events, and long sessions where moisture buildup can affect comfort. The flexible material follows the hand through repeated steering movements without creating unnecessary stiffness or bulk. Slanted Elastic Cuff An elasticated cuff keeps the ONE EVO FX securely positioned throughout the session. Its slanted wrist opening follows the natural angle of the forearm, making the glove easier to put on while creating a comfortable overlap with compatible racing-suit sleeves. The streamlined cuff eliminates the need for a bulky external adjustment strap and maintains a clean, competition-focused fit. FIA 8856-2018 Homologated Protection The OMP ONE EVO FX Gloves are homologated to the FIA 8856-2018 standard for fire-resistant driver clothing. This certification makes them suitable for many professional, amateur, and club-level motorsport events requiring current FIA-approved racing gloves. Drivers should confirm the specific safety-equipment requirements of their racing series or sanctioning organization before competition. OMP ONE EVO FX Glove Features FIA 8856-2018 homologated racing-glove construction Advanced pre-curved shape supports a natural driving position Directional silicone grip zones improve steering control Low-profile grip layout preserves tactile feedback External finger seams reduce internal pressure points Internal thumb seams improve sensitivity around wheel controls Breathable honeycomb fabric promotes airflow Lightweight materials help reduce hand fatigue Elastic cuff provides secure retention Slanted wrist opening allows easier entry Updated OMP competition styling Available in multiple color combinations OMP ONE EVO FX Glove Specifications Manufacturer: OMP Model: ONE EVO FX Product Type: Fire-Resistant Auto Racing Gloves Construction: Lightweight Pre-Curved Design Outer Fabric: Breathable Honeycomb Material Grip: Directional Silicone Zones Finger Seams: External Thumb Seam: Internal Cuff: Elasticated with Slanted Opening Available Sizes: XS, S, M, L, XL, and XXL Homologation: FIA 8856-2018 Available Colors White — 020 Red — 061 Black — 071 Fluorescent Yellow — 099 Navy Blue/Cyan — 244 Why Choose the OMP ONE EVO FX? The ONE EVO FX stands apart through its carefully balanced seam construction, ergonomic shaping, and directional grip design. Every major contact area is configured to improve comfort or control, from the pressure-reducing external finger seams to the sensitive internally stitched thumb. For drivers competing in sprint, endurance, touring-car, formula, or GT environments, the OMP ONE EVO FX provides a refined combination of certified protection, ventilation, steering precision, and fatigue-reducing comfort. OMP ONE EVO FX Racing Glove Size Chart Frequently Asked Questions Are the OMP ONE EVO FX Gloves FIA approved?Yes. The gloves are homologated to the FIA 8856-2018 standard for fire-resistant driver apparel. What makes the ONE EVO FX different from a basic racing glove?It uses pre-curved ergonomics, directional silicone grip zones, breathable honeycomb fabric, and specialized seam placement to improve steering precision and long-session comfort. Why are the finger seams positioned externally?External finger seams move the stitching away from the inside of the fingers, reducing pressure points and improving comfort. Why does the thumb use an internal seam?The internally stitched thumb provides a closer, more sensitive feel when operating steering-wheel buttons, rotary controls, and paddle shifters. Do the gloves have silicone across the palm?Yes. Strategically positioned silicone grip zones improve traction while preserving steering-wheel sensitivity. Are the OMP ONE EVO FX Gloves suitable for endurance racing?Yes. Their pre-curved shape, breathable construction, and pressure-reducing seams are well suited for long sessions and endurance stints. What sizes are available?The OMP ONE EVO FX Gloves are available in sizes XS through XXL. How should the gloves fit?They should fit closely around the palm and fingers without restricting movement or leaving excess material at the fingertips. How should the OMP ONE EVO FX Gloves be cleaned?Follow the care instructions supplied by OMP. In general, avoid bleach, harsh chemicals, machine drying, and direct high heat that could damage the fire-resistant materials or silicone grip.

Bell GT6 ULTRA Carbon Fiber Helmet Discover Your Competitive Edge The Bell GT6 ULTRA Carbon Fiber Helmet brings modern design, lightweight protection, and advanced safety certification together for serious closed-cockpit racers. Inspired by the top-tier HP6, the GT6 ULTRA Carbon combines a sleek carbon shell with a wide eye port, customizable ventilation, and optional communication integration for drivers who demand peak performance and comfort. Built to the latest FIA 8859-2024 and Snell SA2025 standards, the Bell GT6 ULTRA Carbon is designed for endurance, GT, and touring car drivers. Its lightweight carbon construction enhances strength without sacrificing comfort, while multiple cooling and communication options make it a versatile tool for long stints behind the wheel. Whether you’re chasing podiums or logging training laps, this helmet ensures maximum focus and protection. Bell GT6 ULTRA SA2025 Carbon Fiber Helmet Key Features FIA 8859-2024 and Snell SA2025 approved Equipped with Bell Racing SmartLock Mechanism Lightweight carbon-composite shell with gloss finish Wide eye port for superior visibility in closed-cockpit racing Multi-density liner for maximum energy absorption and impact performance Direct-flow chin and extraction vents for excellent ventilation Compatible with optional top- and side-air intakes Integrated channels for drink tube and radio system installation Optional ear cups available for improved noise insulation Interior finished in dark grey FR fabric (other colors available special order) Factory-installed HANS® anchors for head-and-neck restraint systems Compatible with Bell SE06 3mm DSAF shield system Includes tear-off posts and hex wrench Bell GT6 ULTRA SA2025 Carbon Fiber Helmet Size Chart   Bell GT6 ULTRA SA2025 Carbon Fiber Helmet FAQs What certifications does the Bell GT6 ULTRA have? The helmet meets both FIA 8859-2024 and Snell SA2025 standards, making it approved for use in major series worldwide. Can I connect a cooling system to this helmet? Yes, the GT6 ULTRA can be paired with optional top- and side-air intakes and external cooling systems for endurance use. What comes in the box? The package includes the helmet, a clear SE06 shield (installed), tear-off posts, a hex wrench, and a Bell drawstring helmet sack. Is this helmet compatible with HANS devices? Yes, it comes with factory-installed M6 threaded HANS anchors ready for use with your device. Lightweight, strong, and engineered for closed-cockpit racing, the Bell GT6 ULTRA FIA 8859-2024/SA2025 carbon fiber helmet is a trusted choice for competitive drivers. Order today and upgrade your racing safety with one of Bell’s finest designs.

Stilo ST5.1 GT Offshore Composite Racing Helmet Snell SA2020 / FIA 8859-2015 The Stilo ST5.1 GT Offshore Composite Racing Helmet combines professional motorsport protection, lightweight composite construction, and Stilo's legendary modular helmet design in a distinctive high-visibility orange finish. Developed from the highly successful Stilo ST5 GT platform, the Offshore Composite is designed for offshore powerboat racing while offering the versatility required for GT racing, endurance competition, and other demanding motorsport applications. Featuring a multi-sandwich fiberglass composite shell, large eyeport, advanced comfort interior, and integrated accessory ports, the ST5.1 GT Offshore provides exceptional flexibility for drivers who require professional racing helmet technology. This Competition Motorsport configuration is listed with communications pre-installed in the left-side helmet port, providing a convenient starting point for compatible racing intercom systems. Certified to Snell SA2020 and FIA 8859-2015, the helmet features a clear 3mm anti-fog shield, removable fit padding, noise-attenuating ear cushions, and pre-installed M6 threaded inserts for compatible frontal head restraint anchors. Stilo ST5.1 GT Offshore Composite Helmet Key Features Snell SA2020 and FIA 8859-2015 Certified: Meets established automotive motorsport helmet safety standards for qualifying racing applications. High-Visibility Offshore Orange: Bright orange exterior designed for increased visibility in offshore racing environments. Multi-Sandwich Fiberglass Composite Shell: Advanced composite construction engineered for strength, impact protection, and comfort. ST5 GT Helmet Platform: Developed from Stilo's proven racing helmet design with a taller eyeport and versatile accessory compatibility. Wide Eyeport: Provides excellent forward and peripheral visibility. Clear 3mm Anti-Fog Shield: Factory-supplied shield with anti-fog treatment to help maintain visibility. Center Shield Lock: Convenient central visor locking mechanism. Integrated Communication Provisions: Compatible with Stilo racing electronics and communication accessories. Left-Port Communications: Pre-installed communications specified for this Competition Motorsport offering. Modular Side Ports: Allow installation of compatible communication, hydration, and forced-air accessories. Noise-Attenuating Ear Cushions: Help reduce unwanted cockpit noise and improve driver comfort. Removable Cheek and Crown Padding: Compatible replacement components allow customized helmet fit. Two Shell Sizes: Shell construction designed to reduce unnecessary bulk across the available size range. M6 FHR Mounting Inserts: Pre-installed threaded inserts for compatible HANS/FHR post anchors. Compatible ST5 Accessories: Supports selected Stilo ST5 shields, aerodynamic accessories, air kits, and replacement components. High-Visibility Offshore Orange Racing Helmet The Stilo ST5.1 GT Offshore Composite features a distinctive bright orange shell designed to improve helmet visibility in demanding racing environments. For offshore powerboat racing, high-visibility equipment can be particularly valuable where drivers and safety personnel operate in challenging conditions. Beyond its offshore racing applications, the striking orange finish makes the ST5.1 GT Offshore an excellent choice for drivers seeking a distinctive motorsport appearance. The helmet retains the proven ST5 GT shell geometry, enlarged eyeport, and integrated modular accessory provisions. Advanced Multi-Sandwich Fiberglass Composite Construction The ST5.1 GT Offshore uses Stilo's advanced multi-sandwich fiberglass composite construction, engineered to provide a balance of strength, impact energy management, and reduced weight. The composite shell provides a more economical alternative to Stilo's premium carbon fiber helmets while maintaining the ST5 platform's professional motorsport features. The helmet uses two shell sizes to provide a more optimized fit across its size range. Rather than relying on excessive interior padding inside a single oversized shell, Stilo uses different shell dimensions to help improve comfort and minimize unnecessary bulk. Approximate helmet weights vary by shell size and installed accessories. Integrated Communication System and Modular Side Ports One of the most important advantages of the Stilo ST5.1 GT Offshore Composite is its modular accessory platform. The helmet features integrated side ports that accommodate compatible motorsport communication electronics, hydration accessories, and forced-air cooling equipment. The Competition Motorsport configuration is specified with communications pre-installed in the left-side port. This arrangement allows a compatible communication system to be integrated into the helmet without requiring loose external wiring or unnecessary modifications to the shell. Depending on the selected equipment, the ST5 GT platform can accommodate: Compatible Stilo racing communication equipment Integrated microphone and earpiece configurations Driver and co-driver communication systems Optional hydration tubes and drinking valves Optional top or side forced-air cooling systems Compatible aerodynamic accessories Communication compatibility: Confirm the installed communication connector and amplifier compatibility before connecting the helmet to an existing racing intercom system. Additional electronics and accessories may be required. Large Eyeport and Clear Anti-Fog Shield The Stilo ST5.1 GT Offshore Composite incorporates the larger eyeport design introduced with the ST5 helmet platform. Compared with previous ST4 models, the taller eyeport provides an expanded field of view and improved visibility of the surrounding racing environment. The helmet includes a clear 3mm shield with an anti-fog treatment designed to help maintain visibility during changing temperatures and humid conditions. A center-mounted shield locking mechanism provides convenient visor operation while wearing racing gloves. The helmet is compatible with selected Stilo ST5 replacement shields, allowing drivers to choose alternative shield finishes and tint options. Noise-Attenuating Ear Cushions for Driver Comfort Offshore powerboat racing and enclosed competition vehicles can produce considerable engine, wind, and mechanical noise. The ST5.1 GT Offshore Composite includes noise-attenuating earmuff cushions designed to help isolate the ears from surrounding noise. These cushions support driver comfort while providing a suitable foundation for compatible racing communication equipment. Removable ear cushions also allow drivers to customize their helmet configuration using compatible Stilo replacement components. Removable Interior Padding and Customizable Fit Proper helmet fit is essential for driver comfort and safety. The ST5.1 GT Offshore Composite features removable cheek and crown padding, with compatible replacement components available in different thicknesses. These options allow drivers to refine their helmet fit without changing the basic shell construction. Stilo also offers different earmuff cushion options for additional comfort and noise management. Stilo Fit Tip: Drivers who normally wear a 59cm helmet in another brand may prefer a 60cm Stilo configuration. Helmet fit varies by head shape, so measurements and a proper fitting are recommended. HANS and Frontal Head Restraint Compatibility The Stilo ST5.1 GT Offshore Composite includes factory-installed M6 threaded inserts for compatible frontal head restraint anchor hardware. These inserts allow installation of approved HANS/FHR post anchors for use with compatible head and neck restraint systems. Important: The standard helmet includes the threaded mounting provisions, but HANS/FHR post anchors are not included unless specifically listed as part of the purchased configuration. Always follow the restraint manufacturer's installation instructions and the regulations of your racing organization. Stilo ST5.1 GT Offshore Composite Technical Specifications Manufacturer: Stilo Helmets Model: ST5.1 GT Offshore Composite Manufacturer Part Number: DA0702BF2T Series Helmet Type: Full-Face Racing Helmet Color: Offshore Orange Finish: Gloss Snell Certification: SA2020 FIA Homologation: FIA 8859-2015 Shell Material: Multi-Sandwich Fiberglass Composite Shell Sizes: Two Helmet Size Range: 54cm to 64cm Shield: Clear 3mm Anti-Fog Shield Lock: Center Locking Mechanism Replacement Shields: Compatible Stilo ST5 Shields Interior: Fire-Resistant Comfort Lining Removable Cheek Padding: Yes Replaceable Crown Padding: Yes Noise-Attenuating Ear Cushions: Included Integrated Side Ports: Yes Communication Configuration: Left-Side Pre-Installed Communications on CMS Offering Forced-Air Compatible: Yes, With Optional Accessories Hydration Compatible: Yes, With Optional Accessories FHR Mounting: Pre-Installed M6 Threaded Inserts HANS Post Anchors: Sold Separately Unless Specified Chin Strap: Double D-Ring Helmet Bag: Included Primary Application: Offshore Powerboat Racing, GT Racing, Road Racing, and Endurance Racing Quantity: Sold Individually Compatible Stilo ST5 Helmet Accessories The Stilo ST5.1 GT Offshore Composite supports a variety of compatible Stilo ST5 accessories, allowing drivers to personalize their equipment. Stilo ST5 replacement racing helmet shields Compatible Stilo shield hardware and tear-offs Stilo racing communication accessories Compatible hydration tubes and drinking systems Optional forced-air helmet cooling kits Stilo replacement cheek and crown padding Compatible noise-attenuating ear cushions Approved HANS/FHR post anchors Selected Stilo aerodynamic accessories Additional Stilo ST5.1 GT Offshore helmet shields available here Always confirm compatibility with the specific helmet and installed communication equipment before purchasing accessories. Stilo ST5.1 GT Offshore Helmet Sizing Chart   Stilo ST5.1 GT Offshore Helmet Care and Maintenance Proper cleaning and maintenance help keep your Stilo helmet in race-ready condition. Exterior Care: Clean the composite shell using a soft microfiber cloth and helmet-safe cleaning products. Avoid abrasive cleaners, solvents, and aggressive chemicals. Shield Care: Clean the clear anti-fog shield with approved non-abrasive products. Inspect regularly for scratches or damage that may affect visibility. Interior Care: Clean removable comfort padding according to Stilo's instructions. Allow all components to dry completely before reinstalling. Communication Equipment: Inspect the installed communication connections regularly. Protect electronic components from excessive moisture and follow the electronics manufacturer's maintenance instructions. Storage: Store the helmet in a cool, clean, dry environment away from direct sunlight, excessive heat, and chemical exposure. Stilo ST5.1 GT Offshore Composite Helmet FAQs Is the Stilo ST5.1 GT Offshore Snell SA2020 certified?Yes. The ST5.1 GT Offshore Composite carries Snell SA2020 certification. Verify that the certification remains accepted by your racing organization before competition. Is the Stilo ST5.1 GT Offshore FIA approved?Yes. Manufacturer specifications list FIA 8859-2015 homologation alongside Snell SA2020. Check the helmet's certification labels and applicable racing regulations. What is the ST5.1 GT Offshore helmet made from?The helmet features multi-sandwich fiberglass composite construction designed to provide strength, protection, and comfort. Is this helmet designed for offshore powerboat racing?Yes. The Offshore version features a high-visibility orange finish and is designed for offshore racing applications while retaining the versatility of the ST5 GT platform. Does the helmet include racing communications?The Competition Motorsport offering is specified with communications pre-installed in the left-side port. Confirm the connector and communication package compatibility with your existing intercom equipment. Can I install additional communication accessories?Yes. The ST5 GT platform supports compatible integrated communication accessories and configurations through its modular side ports. Can I add a forced-air cooling system?Yes. The helmet supports compatible optional Stilo forced-air cooling accessories. Can I install a hydration system?Yes. Compatible hydration accessories can be integrated using the helmet's modular accessory provisions. Does the helmet include an anti-fog shield?Yes. A clear 3mm anti-fog shield is included as standard equipment. Are replacement helmet shields available?Yes. Compatible Stilo ST5 replacement shields are available separately in selected colors and finishes. Are the cheek pads removable?Yes. The helmet features removable cheek and crown padding, with compatible replacement options for fit customization. Does the helmet include HANS anchors?The helmet includes factory-installed M6 threaded inserts for compatible HANS/FHR anchor installation. Post anchors are not standard equipment unless specifically included in the purchased configuration. What sizes are available?The ST5.1 GT Offshore Composite is offered in sizes ranging from 54cm to 64cm, subject to remaining inventory. How should I choose my Stilo helmet size?Measure the circumference of your head approximately one inch above your eyebrows. The helmet should fit securely without excessive movement or painful pressure points. Consult Stilo's sizing recommendations and arrange a fitting whenever possible. Can I use this helmet for automotive road racing?Yes, when its Snell SA2020 or FIA 8859-2015 certification meets the specific rules of the racing organization and event. Race With Confidence in the Stilo ST5.1 GT Offshore Composite The Stilo ST5.1 GT Offshore Composite SA2020 Racing Helmet delivers the proven performance of Stilo's ST5 GT platform with a high-visibility orange finish, advanced composite construction, integrated communications provisions, and extensive accessory compatibility. From offshore powerboat racing to GT and endurance competition, its large eyeport, anti-fog shield, customizable interior, and modular design make it a versatile choice for serious racers. Shipping Notice: This helmet ships with signature confirmation required upon delivery.

SilverRocket Seamless Carbon Roll Cage for Porsche 991 or 992 GT3/GT3RS This product fits the following cars: Porsche 992 GT3/GT3RS Porsche 991 GT3/GT3RS Redefining Lightweight Safety with Seamless Precision This SilverRocket Seamless Dry Carbon Fiber Roll Cage for Porsche 991 or 992 GT3/GT3RS sets a new standard in lightweight safety innovation. Building on the carbon fiber roll cage concept first pioneered by Porsche, SilverRocket takes it further with a seamless carbon weave finish and advanced engineering enhancements tailored for serious track enthusiasts and performance-focused drivers. Unlike the original Porsche carbon fiber roll cage, the SilverRocket Roll Cage features a completely seamless carbon fiber weave—eliminating visible texture seams and delivering a cleaner, more refined aesthetic. TÜV crash-tested to meet stringent FIA 253 safety standards, this roll cage ensures uncompromising protection whether on the street or at the track. Unique Octagonal Monocoque Structure 50+ layers of aerospace-grade dry carbon fiber sheets are used to form the SilverRocket Roll Cage's unique octagon-shaped monocoque structure, resulting in the strongest and lightest roll cage on the market for your GT3/GT3RS. Based on CAE stress analysis, multiple layers of uni-directional carbon fiber cloths are laid in a proprietary direction during the manufacturing process against the impact force direction to achieve optimal strength and rigidity at specific angles. The SilverRocket Carbon Fiber Roll Cage, equipped with a racing harness, meets the latest FIA safety standards. It supports up to 30 kN of pulling force, with the harness bar positioned at the optimal height to achieve a 0° to -20° harness angle, in accordance with FIA regulations. Key Features & Benefits Seamless carbon weave: Superior visual appeal with no texture seams, offering a true motorsport-inspired look. FIA 253 compliant: TÜV crash-tested for maximum safety and peace of mind. Symmetrical design: Fully symmetrical structure for equal protection of both left- and right-side occupants. Lowered rear structure: Curved design improves rear visibility without compromising strength. Integrated mounting system: Simplified installation with enhanced fitment and structural integrity. Improved accessibility: Larger central opening for easier access to rear storage space. Optimized carbon fiber layup: Stronger and lighter at just 12.8 kg (28.2 lbs.), compared to the original 14.2 kg (31.2 lbs.) cage. Specifications: Material: Seamless dry carbon fiber Weight: 12.8 kg/28.2 lbs. (vs. 14.2 kg/31.2 lbs. OEM) Fitment: Porsche 991 or 992 GT3 / GT3 RS Certification: TÜV crash-tested, FIA 253 compliant This SilverRocket carbon fiber roll cage is designed for those who demand the ultimate blend of safety, precision engineering, and cutting-edge aesthetics. Upgrade your Porsche 991 or 992 GT3 or GT3 RS with a roll cage that reflects your commitment to performance and style. Available now at Competition Motorsport — your trusted source for advanced motorsport safety equipment and expert support. Order today to transform your track experience. This product is intended for off-road, race track use only.

Alpinestars Tech-M Pit Crew Gloves The Alpinestars Tech-M Pit Crew Gloves are purpose-built for professional motorsport mechanics who need fire-resistant protection, impact absorption, dependable grip, and fast on-and-off performance in the pit lane. Designed and developed through competition in the World Endurance Championship, the Tech-M combines a lightweight bonded aramid-fiber construction with strategically positioned protective foam, abrasion-resistant reinforcement, and textured leather palm inserts. The pre-curved design helps reduce material bunching while operating wheel guns, handling wheels, and completing other demanding pit-stop tasks. An open cuff with a 180-degree elasticated wrist provides a secure fit while allowing mechanics to quickly put on or remove the gloves. Developed for Professional Pit-Crew Use The Tech-M was designed specifically around the needs of motorsport pit crews. Its construction supports the rapid hand movements, tool control, grip, and protection required during high-pressure pit stops. The reduced-material design helps preserve dexterity and tactile feedback while maintaining protection in areas exposed to impact, abrasion, vibration, and heat. Flame-Resistant Aramid Construction The main glove body is made from bonded flame-resistant aramid fiber. This lightweight construction provides a balance of protection, comfort, flexibility, and durability for professional motorsport environments. The flame-resistant materials help provide the coverage required for pit-lane personnel working around fuel, hot components, brakes, wheels, and other competition hazards. Impact-Absorbing Knuckle and Finger Protection Silicon FR-coated protective patches incorporate foam reinforcement across the knuckles and fingers. These strategically positioned areas help absorb impact during wheel changes, equipment handling, and other pit activities. The protective construction is designed to provide additional coverage without creating unnecessary bulk or significantly restricting hand movement. Reinforced Thumb and Index-Finger Area A Silicon FR-reinforced aramid patch is positioned between the thumb and index finger. This high-contact area experiences substantial wear when gripping wheel guns, handles, tools, and other pit equipment. The reinforcement improves abrasion resistance while helping the glove maintain its shape and performance through repeated use. Textured Goat Nappa Leather Palm Inserts Strategically positioned 1 mm Textured Goat Nappa leather inserts provide grip, abrasion resistance, and shock absorption across key palm contact areas. The leather reinforcement helps mechanics maintain control of wheel guns, wheels, tools, and equipment while reducing vibration and impact transmitted through the hands. Pre-Curved Fingers and Palm The fingers and palm are pre-curved to follow the natural gripping position of the hand. This construction reduces excess material and bunching when holding a wheel gun or other pit equipment. The ergonomic shape helps improve dexterity, comfort, and control during fast, repetitive pit-stop procedures. Open Cuff with 180-Degree Elasticated Wrist The wide cuff opening allows mechanics to quickly put on the gloves when preparing for a pit stop. A 180-degree elasticated wrist helps hold the glove securely in place without requiring a bulky closure system. An integrated silicone pull tab assists with removal, helping pit crew members transition quickly between tasks. Durable Embroidered Graphics Fully embroidered Alpinestars graphics provide a professional appearance and improved durability compared with basic surface printing. The branding is designed to withstand repeated professional use and frequent handling. FIA Homologated Pit-Crew Protection The Alpinestars Tech-M Pit Crew Gloves comply with the FIA 8856-2000 homologation standard. This makes them suitable for many professional motorsport applications requiring approved protective equipment for pit-lane personnel. Teams and crew members should confirm the required certification with their racing organization, series, or sanctioning body before competition. Alpinestars Tech-M Pit Crew Glove Features Designed specifically for professional motorsport pit crews Developed through World Endurance Championship competition Bonded flame-resistant aramid-fiber construction Lightweight reduced-material design Impact-absorbing foam reinforcement at the knuckles and fingers Silicon FR-coated protective patches Reinforced thumb and index-finger contact area Textured 1 mm Goat Nappa leather palm inserts Enhanced grip, abrasion resistance, and shock absorption Pre-curved fingers and palm reduce material bunching Wide open cuff allows quick entry 180-degree elasticated wrist provides a secure fit Silicone pull tab assists with glove removal Durable embroidered Alpinestars graphics FIA 8856-2000 homologated Alpinestars Tech-M Pit Crew Glove Specifications Manufacturer: Alpinestars Model: Tech-M Product Type: Pit Crew Racing Gloves Main Material: Bonded flame-resistant aramid fiber Protection: Foam-reinforced Silicon FR knuckle and finger patches Palm: Textured 1 mm Goat Nappa leather inserts Fit: Pre-curved fingers and palm Wrist: 180-degree elasticated construction Cuff: Wide open aperture with silicone removal tab Homologation: FIA 8856-2000 Ideal for Pit-Lane and Motorsport Workshop Tasks The Alpinestars Tech-M Pit Crew Gloves are designed for demanding motorsport tasks, including: Wheel changes Wheel-gun operation Tire and wheel handling Endurance-racing pit stops Sports-car and touring-car competition Professional race-team service work Trackside mechanical support Motorsport workshop preparation Why Choose Alpinestars Tech-M Pit Crew Gloves? The Alpinestars Tech-M combines fire-resistant protection with the grip, impact absorption, and dexterity required for professional pit-lane work. Its reinforced knuckles, fingers, palm, and thumb area help protect the hands during wheel changes and tool operation. The lightweight pre-curved construction improves control while reducing bunching, and the wide cuff allows quick entry during time-sensitive pit stops. For mechanics who need FIA-homologated protection developed specifically for motorsport service work, the Tech-M is a purpose-built solution. Alpinestars Tech-M Pit Crew Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-M Gloves FIA approved?Yes. The Tech-M Pit Crew Gloves comply with the FIA 8856-2000 homologation standard. Are these gloves designed for drivers or pit crew members?They are specifically designed for motorsport pit crews and mechanics performing wheel changes, tool operation, and other pit-lane tasks. Do the Tech-M Gloves have impact protection?Yes. Foam-reinforced Silicon FR patches are strategically positioned across the knuckles and fingers to help absorb impact. What material is used on the palm?The palm uses strategically positioned 1 mm Textured Goat Nappa leather inserts for grip, abrasion resistance, and shock absorption. Are the gloves suitable for using a wheel gun?Yes. Their palm reinforcement, pre-curved fit, grip inserts, and impact-absorbing construction are designed for wheel-gun operation and wheel changes. What is the benefit of the pre-curved design?The pre-curved fingers and palm follow the natural gripping position of the hand, reducing material bunching and improving control. How do the gloves stay secure around the wrist?A 180-degree elasticated wrist provides a close, secure fit without requiring a bulky external closure. Are the gloves easy to remove quickly?Yes. The wide cuff opening and integrated silicone tab make them easier to put on and remove during fast pit-lane transitions. Are the Alpinestars graphics printed or embroidered?The gloves feature fully embroidered graphics for improved durability and a professional appearance.

Stilo ST5 Earcup Set Stilo passive noise attenuating removable earcups. Not for use with helmets equipped with built-in earcup communications. Can be used in conjunction with 3.5mm jack and in-ear buds, or without any communications installed.

Schuberth SP1 Top Air  Add Top Air Ventilation to Your Schuberth SP1 Schuberth's flat, low-headroom top air attachment lets you connect your Schuberth SP1 helmet to your forced-air ventilation system. The Schuberth SP1 Top Air attaches to the top of the SP1 using high strength double-sided adhesive, and allows drivers to pump fresh air through the dedicated air channels within the helmet EPS. Add cooling fresh air to your Schuberth SP1 Carbon helmet without compromising roof clearance. Choose from large- or small-inlet connector.

CMS Performance Sub Strap + Lap Belt Mount for GR Supra Fits the Following Vehicles: Toyota GR Supra, A90/91 (2020+) Toyota GR86 (2022+) Subaru BRZ, ZN8 (2022+) The Best Way to Mount Harness Lap and Sub Belts in Your Toyota/Subaru The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-001 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

Schuberth Helmet Bag Carry your helmet safely and securely in this premium-quality Schuberth Helmet Bag. Designed to fit both a Frontal Head Restraint/HANS device and your favorite racing helmet, the Schuberth Helmet Bag is the perfect way to help protect your Schuberth SP1 or any helmet!

Sparco K-Rapid Kart Racing Shoes The Sparco K-Rapid Kart Racing Shoes combine fast, precise adjustment with lightweight construction and responsive pedal control. Developed for competitive kart racing, the K-Rapid features Sparco’s rotor quick-closure system, allowing drivers to fine-tune the fit without traditional laces. A smooth microfiber upper provides a supportive and flexible feel, while the breathable lining helps manage heat during demanding indoor and outdoor karting sessions. The elasticated rear ankle bellow allows natural movement when braking and accelerating without sacrificing heel support. The ultra-light natural rubber outsole uses differentiated grip textures to balance pedal sensitivity with dependable traction. Its oil-resistant and wet-surface grip characteristics help maintain control both inside the kart and while moving through the paddock. Rotor Quick-Closure System The K-Rapid uses a dial-operated rotor closure that evenly tensions the cable across the foot. This system allows quick and precise adjustments, helping the shoe maintain a secure fit throughout practice, qualifying, and racing. The low-profile cable design also eliminates loose conventional laces that can require readjustment or become caught around kart components. Smooth Microfiber Upper The upper is constructed from lightweight microfiber leather for a comfortable balance of flexibility, support, and durability. Its smooth profile reduces unnecessary bulk while allowing the shoe to conform closely to the foot. Breathable Interior Lining A breathable inner lining promotes airflow around the foot and helps reduce heat buildup. This improves comfort during long races, warm-weather events, and physically demanding indoor karting sessions. Elasticated Rear Ankle Bellow The flexible rear bellow allows the ankle and Achilles area to move naturally during pedal operation. This unrestricted movement helps reduce pressure while maintaining support around the heel. Shock-Absorbing Footbed An internal shock-absorbing footbed helps isolate vibration transferred through the kart chassis and pedals. Reducing vibration can improve comfort and limit foot fatigue during long sessions. Ultra-Light Natural Rubber Sole The lightweight rubber outsole is designed specifically for kart racing. Differentiated grip textures provide an effective balance of traction, flexibility, and direct pedal feedback. Grip on Wet and Oily Surfaces The natural rubber compound provides dependable traction on kart pedals and trackside surfaces, including areas that may be damp or exposed to oil and automotive fluids. Abrasion-Resistant Protection High-abrasion-resistant reinforcement is positioned around the toe and heel, helping protect the shoe from repeated contact with pedals, chassis components, and paddock surfaces. FIA 8877-2022 Karting Approval The Sparco K-Rapid is homologated to the FIA 8877-2022 karting equipment standard. This makes it suitable for competitions requiring footwear certified to the latest FIA karting requirements. Sparco K-Rapid Kart Racing Shoe Features FIA 8877-2022 homologated Designed specifically for competitive kart racing Precision rotor quick-closure system Fast and evenly distributed fit adjustment Smooth lightweight microfiber upper Breathable and comfortable inner lining Elasticated rear ankle bellow Supportive fit with unrestricted ankle movement Shock-absorbing internal footbed Helps reduce vibration and foot fatigue Ultra-light natural rubber outsole Differentiated grip textures Responsive brake and throttle pedal feel Grip on wet and oily surfaces Abrasion-resistant toe reinforcement Abrasion-resistant heel protection Suitable for indoor and outdoor kart racing Technical Specifications Product: Sparco K-Rapid Kart Racing Shoes Manufacturer: Sparco Product Type: Kart racing shoes Upper Material: Smooth microfiber leather Closure: Rotor-operated cable closure system Lining: Breathable interior lining Rear Construction: Elasticated ankle bellow Footbed: Shock-absorbing insole Outsole: Ultra-light natural rubber Sole Design: Differentiated grip textures Protection: Abrasion-resistant toe and heel reinforcement Certification: FIA 8877-2022 European Sizes: 36–48 Sparco K-Rapid Kart Racing Shoe Size Chart Frequently Asked Questions Are the Sparco K-Rapid Kart Racing Shoes FIA approved? Yes. The Sparco K-Rapid is homologated to the FIA 8877-2022 karting equipment standard. Drivers should verify the current footwear requirements for their racing series, class, and event. How does the rotor closure system work? The rotor dial tightens the cable across the shoe to create an evenly distributed and adjustable fit. It can be quickly tightened or released between sessions without tying conventional laces. Do the Sparco K-Rapid shoes provide good pedal feel? Yes. The ultra-light rubber outsole is designed to provide direct brake and throttle feedback while maintaining dependable pedal grip. What is the benefit of the elasticated rear ankle bellow? The rear bellow allows the ankle to move naturally during braking and acceleration while maintaining support around the heel and Achilles area. Are the Sparco K-Rapid shoes breathable? Yes. The interior uses a breathable lining designed to improve airflow and reduce heat buildup during long karting sessions. Are the Sparco K-Rapid Kart Racing Shoes fireproof? No. The K-Rapid is designed and homologated specifically for kart racing. It should not replace fire-resistant footwear required for auto racing. Can the Sparco K-Rapid be used for indoor karting? Yes. The secure closure, breathable construction, and responsive sole make the K-Rapid suitable for both indoor and outdoor kart racing. Does the K-Rapid provide grip on wet surfaces? Yes. The natural rubber outsole is designed to maintain traction on wet or oily surfaces while providing the sensitivity needed for precise pedal control. What sizes are available? The Sparco K-Rapid is generally available in European sizes 36 through 48. Refer to the Sparco karting shoe size chart before choosing a size. How should Sparco K-Rapid Kart Racing Shoes fit? Karting shoes should fit securely around the heel and midfoot without painful pressure points. The rotor closure should feel supportive without restricting circulation or natural ankle movement. Do karting shoes improve driving performance? Karting shoes do not automatically reduce lap times, but their thin, responsive soles and secure fit can improve pedal feedback, consistency, and driver confidence. Should special socks be worn with the K-Rapid? Special socks are not required, although thin moisture-wicking karting socks can improve comfort and reduce heat buildup during long sessions. How should the Sparco K-Rapid shoes be cleaned? Clean the exterior using a damp cloth and mild soap, then allow the shoes to air dry naturally. Do not machine wash, submerge them in water, or place them near direct heat. Quick Adjustment and Precise Karting Control The Sparco K-Rapid Kart Racing Shoes combine a precision rotor closure, breathable microfiber construction, flexible ankle support, and a high-grip natural rubber outsole. Their FIA 8877-2022 homologation makes them a premium choice for kart racers seeking secure fit adjustment, durable protection, and responsive pedal feel.

Sparco X-Light+ Racing Shoes The Sparco X-Light+ Racing Shoes are designed for professional drivers who want the lightest possible race shoe without sacrificing safety, comfort, or pedal feel. Built with advanced fire-retardant stretch fabric, soft leather details, and a unique carbon fiber sole insert, the X-Light+ delivers an ultra-responsive connection between the driver and the pedals. Created for top-level motorsport competition, the Sparco X-Light+ wraps around the foot like a second skin for a secure, breathable fit. Its lightweight construction helps reduce fatigue, while the thin sole design gives the driver excellent sensitivity and control during braking, throttle modulation, and quick footwork. Ultra-Lightweight Racing Shoe Performance The X-Light+ is engineered around a full fabric upper that uses a fire-retardant stretch material developed by Sparco. This breathable upper conforms to the foot while helping keep dust, soil, and debris out of the shoe during racing use. Kevlar cables woven into the upper provide the right amount of structure and support without adding unnecessary bulk. The result is a racing shoe that feels flexible, lightweight, and precise while still delivering the protection required for competition. Carbon Fiber Sole For Maximum Pedal Feel The Sparco X-Light+ features a carbon fiber midsole developed using Sparco’s advanced materials experience. This flexible carbon fiber insert runs from the heel to the toe and is visible through the ultra-thin outsole. The outsole is oil-resistant, fuel-resistant, and antistatic, giving drivers a stable and responsive platform for high-performance driving. A cushioned inner sole with a printed silicone pattern adds grip inside the shoe for improved comfort and pedal control. Key Features FIA 8856-2018 approved racing shoes Ultra-lightweight construction for professional motorsport use Fire-retardant stretch fabric upper Soft leather construction details Breathable upper wraps around the foot like a second skin Kevlar cable support woven into the upper Carbon fiber inlaid sole for excellent pedal sensitivity Ultra-thin outsole for precise driver feedback Oil-resistant, fuel-resistant, and antistatic outsole Cushioned inner sole with printed silicone grip pattern Designed for maximum pedal feel and reduced weight Available Colors Black White/Black Black/Orange Black/Yellow Black/Red Built For Serious Drivers The Sparco X-Light+ is ideal for drivers who want an extremely lightweight racing shoe with exceptional flexibility and control. Its stretch upper, carbon fiber sole insert, and thin outsole make it a strong choice for road racing, endurance racing, formula cars, touring cars, and other motorsport disciplines where precision matters. For drivers who prioritize low weight, breathability, and high pedal sensitivity, the X-Light+ is one of Sparco’s most advanced racing shoe options. Sparco X-Light+ Racing Shoes Sizing Chart Frequently Asked Questions Are the Sparco X-Light+ Racing Shoes FIA approved? Yes. The Sparco X-Light+ Racing Shoes are FIA 8856-2018 approved for motorsport competition. What makes the Sparco X-Light+ lightweight? The X-Light+ uses a fire-retardant stretch fabric upper, lightweight support construction, and an advanced carbon fiber sole insert to reduce unnecessary weight. Do these shoes have a carbon fiber sole? Yes. The Sparco X-Light+ features a carbon fiber inlaid sole that runs from heel to toe for improved pedal sensitivity and support. Are the Sparco X-Light+ Racing Shoes breathable? Yes. The stretch fabric upper is designed to be breathable while fitting closely around the foot for comfort and control. What colors are available? The Sparco X-Light+ is available in Black, White/Black, Black/Orange, Black/Yellow, and Black/Red. Who should use the Sparco X-Light+? The X-Light+ is best for serious racers and professional drivers who want an ultra-lightweight FIA-approved shoe with maximum pedal feel and a close, flexible fit.    

Sabelt TB-11 Zero Gravity Race Shoe The Sabelt TB-11 Zero Gravity Race Shoe is an ultra-lightweight professional racing shoe designed for drivers who want maximum pedal feel, breathable comfort, and FIA-approved protection. Weighing just 184g in UK size 8 / EU 42, the TB-11 Zero Gravity is built to feel incredibly light while still delivering the support, grip, and safety needed for serious competition. Made in Italy with a fire-retardant printed fabric upper, carbon fiber insole, 3D honeycomb internal structure, and an ultra-thin high-grip sole, the Sabelt TB-11 Zero Gravity gives drivers a precise connection to the pedals. It is designed for racers who want a lightweight shoe that stays comfortable through long sessions without sacrificing control. Sabelt TB-11 Zero Gravity Race Shoe Features FIA 8856-2018 approved for motorsport competition use. Ultra-lightweight design weighs just 184g in UK size 8 / EU 42. Made in Italy with premium motorsport craftsmanship. Fire-retardant printed fabric upper reduces weight while maintaining protection. Carbon fiber insole provides the ideal balance of stiffness and pedal dexterity. 3D honeycomb internal construction improves airflow and comfort. Ultra-thin high-grip sole enhances pedal sensitivity. Oil-resistant sole construction is built for racing environments. Lightweight quick lace-up system delivers a secure, fast fit. Designed for professional racing, club racing, endurance racing, and track use. Ultra-Lightweight Racing Performance The TB-11 Zero Gravity is built for drivers who want to save weight without giving up safety or feel. At only 184g in UK size 8 / EU 42, this shoe gives the driver a barely-there fit while maintaining the structure needed for controlled braking, throttle modulation, and smooth pedal transitions. Carbon Fiber Insole The carbon fiber insole is designed to give drivers a precise balance of stiffness, flexibility, and pedal sensitivity. This helps improve feedback through the brake, throttle, and clutch pedals so the driver can make more accurate inputs in the car. Breathable 3D Honeycomb Interior The 3D honeycomb internal structure helps airflow move through the shoe, reducing heat buildup during long stints and hot cockpit conditions. This breathable design helps keep the driver more comfortable and focused during demanding race sessions. Ultra-Thin High-Grip Sole The ultra-thin sole is designed for direct pedal feel and confident grip. Its high-grip, oil-resistant construction helps maintain traction on the pedals while supporting the sensitivity drivers need for smooth and accurate control. Quick Lace Closure The lightweight quick lace-up system helps secure the shoe quickly and evenly around the foot. This closure system keeps the fit snug without adding unnecessary bulk, making the TB-11 Zero Gravity easy to tighten before heading to grid. FIA 8856-2018 Approved Protection The Sabelt TB-11 Zero Gravity Race Shoe is FIA 8856-2018 approved for motorsport competition. The fire-retardant fabric upper and race-focused construction provide modern protection while keeping the shoe extremely light and breathable. Sabelt TB-11 Zero Gravity Race Shoe Specifications Approval: FIA 8856-2018 Weight: 184g in UK size 8 / EU 42 Upper: Fire-retardant printed fabric Insole: Carbon fiber insole Interior: 3D honeycomb internal construction Sole: Ultra-thin, high-grip, oil-resistant sole Closure: Lightweight quick lace-up system Origin: Made in Italy Use: Auto racing, endurance racing, club racing, track days, and competition driving Sabelt TB-11 Zero Gravity Race Shoe Sizing Chart Sabelt TB-11 Zero Gravity Race Shoe FAQs Are the Sabelt TB-11 Zero Gravity Race Shoes FIA approved?Yes. The Sabelt TB-11 Zero Gravity Race Shoe is FIA 8856-2018 approved for motorsport competition use. How much does the Sabelt TB-11 Zero Gravity weigh?The TB-11 Zero Gravity weighs just 184g in UK size 8 / EU 42, making it an extremely lightweight racing shoe. Does the TB-11 Zero Gravity have a carbon fiber insole?Yes. It features a carbon fiber insole designed to balance stiffness, flexibility, and pedal sensitivity. Are these shoes comfortable for long races?Yes. The lightweight construction, breathable 3D honeycomb internals, and quick lace fit make the TB-11 Zero Gravity well suited for long sessions and endurance racing. What kind of sole does the TB-11 Zero Gravity use?It uses an ultra-thin high-grip sole that is oil resistant and designed to maximize pedal feel. Where are the Sabelt TB-11 Zero Gravity Race Shoes made?The Sabelt TB-11 Zero Gravity Race Shoes are made in Italy.

OMP First ELLE Racing Driver Suit The OMP First ELLE Racing Driver Suit is an FIA 8856-2018 homologated women’s racing suit designed for female drivers who need dependable fire protection, comfort, and a proper motorsport fit. OMP updated the First ELLE with lightweight fabrics while keeping its classic styling, making it a strong entry-level FIA race suit for drivers moving into competition. Designed, sized, and tailored specifically for female racing drivers, the First ELLE helps deliver a better fit in the driving position. A well-fitted fire suit is an important part of driver safety, and OMP’s women-specific cut helps reduce excess bulk while improving comfort behind the wheel. FIA-Certified Women’s Racing Suit The OMP First ELLE is FIA 8856-2018 certified, meeting current international motorsport safety standards for fire-resistant driver apparel. Its two-layer construction combines a durable fire-retardant outer shell with a soft knitted inner layer for comfort during long sessions in the car. Lightweight Comfort and Driver Mobility The revised First ELLE is lighter than previous versions, with a fabric weight of 385 g/m². Full-floating arms with elastic bellows give the driver greater freedom of movement, while the elastic knitted lower-back insert improves mobility when seated. OMP also uses ultra-flat internal seams to help reduce rubbing and improve comfort. OMP First ELLE Driver Suit Protection Features FIA 8856-2018 homologated racing driver suit Designed, sized, and tailored for female racing drivers Lightweight two-layer fire-resistant construction Durable fire-retardant exterior layer Soft knitted inner material for comfort Classic OMP styling with updated lightweight fabrics OMP First ELLE Driver Suit Key Details Women-specific fit for improved comfort and safety Full-floating arms for greater freedom of movement Elastic bellows for improved mobility Elastic knitted lower-back insert Ultra-flat non-rubbing internal seams Modern fishbone quilting designed for seated driver ergonomics Classic-fit design Weight: 385 g/m² Why Choose the OMP First ELLE Racing Suit? The OMP First ELLE is a smart choice for female racers who want an FIA-certified suit with a proper women’s fit, comfortable two-layer construction, and dependable OMP quality. With its lightweight feel, floating arms, soft inner layer, and mobility-focused design, the First ELLE delivers the safety and comfort needed for race weekends, track events, and competitive driving. OMP First ELLE Racing Suit FAQs Is the OMP First ELLE FIA certified?Yes, the OMP First ELLE Racing Driver Suit is certified to the FIA 8856-2018 homologation standard. Is the OMP First ELLE designed for women?Yes, the First ELLE is specifically designed, sized, and tailored to better fit female racing drivers. How heavy is the OMP First ELLE suit?The OMP First ELLE has a fabric weight of 385 g/m². Does the OMP First ELLE have floating arms?Yes, the suit features full-floating arms with elastic bellows for improved range of motion. What type of construction does the OMP First ELLE use?The First ELLE uses a lightweight two-layer fire-resistant construction with a durable exterior and a soft knitted inner layer. Is the OMP First ELLE comfortable for long race sessions?Yes, the soft knitted inner material, ultra-flat seams, elastic lower-back insert, and floating arm design all help improve comfort while seated in the car.

Chillout Systems Insulated Coolant Y-Hose The Chillout Systems Insulated Coolant Y-Hose is made of insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield. The primary end of the hose is 6 ft. long branching off into dual 4 ft. hose ends that enable multiple cooling garments to be connected to one driver cooling unit with ¼” fittings. Hose too long for your set-up? It's easy to cut the hose to desired length. Our hoses comes with extra supply of matching shrink wrap for a flawless, clean, durable finish. Chillout Systems Insulated Coolant Y-Hose Features 10-foot overall length, includes additional heat shrink tubing for custom sizing while maintaining a finished look Male connectors, four pieces Female dual-prong connector to connect cooler, one piece Can be connected to other hoses to extend length including additional Y-connector Double-insulation: one layer to protect the hoses and insulation, the other to keep your coolant cool and efficient