Girodisc Porsche 350mm Rear Rings Restore precise braking feel in your Porsche with Girodisc D2-032 350mm rear replacement rings. These precision-machined rings bolt directly to existing Girodisc aluminum hats using the included floating hardware kit. Replace only the wear surface and maintain the lightweight, high-performance benefits of your Girodisc two-piece system — perfect for both road and track driving. Vehicle Fitment Compatible with:• Porsche 997 Carrera S (rear)• Porsche 997 Carrera 4S (rear)• Porsche 997 GTS (rear)• Porsche 997 Targa 4S (rear)Note: For Girodisc 350mm two-piece rear rotor systems only. Not compatible with OEM or PCCB carbon-ceramic rotors. Features • Sold as a left/right pair with new floating hardware kit• Direct replacements for Girodisc 350mm two-piece rear rotors• High-carbon cast iron delivers excellent heat dissipation and strength• Curved directional vanes maximize cooling and prevent fade• Maintains factory brake bias and ABS calibration• Designed exclusively for Girodisc aluminum hats – not compatible with OEM or other brands Specifications • Diameter: 350mm• Position: Rear• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rings and complete hardware kit• Sold/priced per pair• MSRP: $880.00 Girodisc D2-032 Porsche 997 Rear Replacement Ring FAQs Do these fit the factory Porsche two-piece rotors? No. These are designed only for Girodisc aluminum hats and are not compatible with OEM rotor assemblies. Can I use these with the factory calipers? Yes. These rings are designed to work seamlessly with the stock Porsche calipers when paired with Girodisc hats. Are they suitable for heavy track use? Absolutely. Girodisc’s floating design and high-carbon alloy handle repeated high-temperature braking without warping or cracking. When should I replace my Girodisc rings? Replace them when the rotors reach minimum thickness or show visible surface heat checking from repeated track cycles. Upgrade your Porsche’s braking performance with Girodisc D2-032 350mm rear replacement rings — precision-engineered for balance, cooling, and endurance under the toughest driving conditions.

D1-122 Girodisc Porsche Front Rings Maintain your Porsche’s precision braking feel with Girodisc D1-122 340mm front replacement rings. Designed to bolt directly to your existing Girodisc aluminum hats using the included floating hardware kit, these rings provide OEM fitment with track-proven performance. Each rotor ring is CNC-machined from Girodisc’s proprietary high-carbon cast iron, offering exceptional heat management, reduced unsprung weight, and improved consistency under demanding driving conditions. Vehicle Fitment Compatible with:• Porsche 991.1 Carrera S (2012–2016)• Porsche 991.1 Carrera 4S (2012–2016)• Porsche 991.1 Carrera GTS (2014–2016)Note: Designed exclusively for Girodisc 340mm two-piece front rotor systems. Not compatible with OEM one-piece or PCCB carbon-ceramic rotors. Features • Sold as a left/right pair with complete floating hardware kit• Direct replacements for Girodisc 340mm two-piece front rotors• High-carbon iron alloy ensures stable friction and long-term durability• Directional curved vanes optimize cooling airflow and reduce rotor temperatures• Maintains factory brake bias, ABS, and stability control calibration• Precision-balanced to eliminate vibration and ensure smooth braking• Designed exclusively for Girodisc aluminum hats Specifications • Diameter: 340 mm• Position: Front• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rotor rings and complete hardware kit• Sold/priced per pair Girodisc D1-122 Porsche Front Replacement Ring FAQs Can these be used with OEM Porsche rotor hats? No. These rings are engineered specifically for Girodisc aluminum hats and will not fit OEM one-piece or PCCB systems. Which brake pad compounds are recommended? For street and occasional track driving, Pagid RS29 or Ferodo DS2500 pads are excellent choices. For full track use, use higher-friction compounds such as Pagid RSL1. What torque specification is required for the hardware? Torque each bolt to 12 ft-lbs (16 Nm) with blue Loctite, then recheck after one full heat cycle for proper seating. Are these rotors directional? Yes. Each rotor is marked for left or right installation to ensure proper airflow through the curved internal vanes, maximizing cooling efficiency. Upgrade your Porsche 991.1 Carrera’s braking performance with Girodisc D1-122 340mm front replacement rings — designed for heat control, balance, and endurance from road to track.

A1-122 Girodisc Two-Piece 350mm Front Brake Rotors (Discontinued Design) FITMENT: Porsche Carrera S 991.2 Porsche Carrera 4S 991.2 Porsche Carrera GTS 991.2 Discontinued New old stock rotor.  These have the straight grooves as images show, not the new curved grooves.  Final Sale, no returns or exchanges. This Girodisc system is a direct replacement for OEM Porsche steel (cast iron) rotors1 with the use of the provided caliper spacers. The Girodisc rotors are slightly larger than the stock Porsche rotors at 350mm vs. 340mm, providing greater braking force and cooling capacity. The Girodisc front rotors are approximately 21.0 lbs. vs. 24.4 lbs. for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair. 1 Note: this Girodisc kit does not fit Porsche models with factory PCCB brakes.

Pagid Racing Brake Pad Shape No. 4927 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 918 Spyder 2015 X Porsche 991 GT3 [ceramic brakes] 14 - 18 X Porsche 991 GT3 RS [ceramic brakes] 15 - 18 X Porsche 991 Turbo [ceramic brakes] 13 - X Porsche 991 Turbo S [ceramic brakes] 13 - X Porsche 991.2 GT2 RS [ceramic brakes] 18 - X Porsche 991.2 GT3 [ceramic brakes] 19 - X Porsche 991.2 GT3 RS [ceramic brakes] 19 - X Porsche 991 R [ceramic brakes] 16 - X Porsche 992 3.0 Carrera 4S [ceramic brakes] 20 - X Porsche 718 Cayman GT4 4.0 [982] [ceramic brakes] 19 - X Porsche Cayman GT4 [981] [ceramic brakes] 16 - X Porsche 992 Carrera S [ceramic brakes] 20 - X Porsche 992 GT3 [ceramic brakes] 22 - X Porsche 718 Cayman GT4 4.0 RS [982] [ceramic brakes] 22 - X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.

Pagid Racing Brake Pads Shape No. 4922 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 3.8 Carrera S / GTS [iron brakes] 2011 - 19 X Porsche 981 Boxster Spyder [iron brakes] 2015 - 20 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications.

Pagid Racing Brake Pad Shape No. 4908 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brakes] 12 - 19 X Porsche 991 3.8 Carrera S [ceramic brakes] 12 - 19 X Porsche 991.2 3.0 Carrera [ceramic brakes] 16 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 16 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 16 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 17 - 19 X Porsche Cayman S [981] [ceramic brakes] 13 - 25 X Porsche 718 Cayman [982C] [ceramic brakes] 16 - 25 X Porsche 718 Cayman S [982C] [ceramic brakes] 16 - 25 X Porsche 718 Cayman T [982C] [ceramic brakes] 19 - 25 X Porsche 718 Cayman GTS [982C] [ceramic brakes] 17 - 20 X Porsche 718 Cayman GTS 4.0 [982C] [ceramic brakes] 20 - 25 X Porsche 718 Boxster [982] [ceramic brakes] 16 - 25 X Porsche 718 Boxster S [982] [ceramic brakes] 16 - 25 X Porsche 718 Boxster T [982] [ceramic brakes] 19 - 25 X Porsche 718 Boxster GTS [982] [ceramic brakes] 17 - 20 X Porsche 718 Boxster GTS 4.0 [982] [ceramic brakes] 20 - 25 X Porsche 718 Spyder [982] [ceramic brakes] 19 - 25 X Porsche 718 Cayman T [982C] [ceramic brakes] 19 - 25 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Ferodo FCP4955 Brake Pads Ferodo FCP4955 Brake Pad Fitment Guide Make Model Engine / Version Years Front Pad Shape Rear Pad Shape Porsche 911 (991) Carrera / Carrera 4 3.4 2011+ / 2012+ FCP4805 / FCP4955 FCP4424 / FCP4713 Porsche 911 Convertible (991) Carrera / Carrera 4 3.4 2012+ FCP4805 / FCP4955 FCP4424 / FCP4713 Porsche 911 Targa (991) Carrera 4 3.4 2014+ FCP4805 / FCP4955 FCP4424 / FCP4713 Porsche 911 (991) Carrera S / Carrera 4S 3.0 2015+ FCP4955 FCP4713 Porsche 911 Convertible (991) Carrera S / 4S 3.0 2015+ FCP4955 FCP4713 Porsche 911 Targa (991) Carrera 4S 3.0 2015+ FCP4955 FCP4713 Porsche 911 (991) Carrera S / Carrera 4S / GTS 3.8 2011+ FCP4955 FCP4713 Porsche 911 Convertible (991) Carrera S / 4S / GTS 3.8 2012+ FCP4955 FCP4713 Porsche 911 Targa (991) Carrera 4S / 4 GTS 3.8 2014+ FCP4955 FCP4713 Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo Compound DS3.12 The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Ferodo Compound DS1.11 The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. Ferodo Compound DS2500 Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. Ferodo 11 FCP4955 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo 11 FCP4955 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo 11 FCP4955 Operating Temperature Comparison Chart

Cobalt Brake Pads Porsche D1644 Racing Brake Pads (Front) - 16.6mm Cobalt D1644 Fits The Following Vehicles: Porsche 991 Carrera S (2012-19), Front w/ iron brakes Porsche 991 Carrera 4S (2012-19), Front w/ iron brakes Porsche 991 Carrera GTS (2015-19), Front w/ iron brakes Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.

Pagid Racing Brake Pad Shape No 4909 Pagid 4909 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brake caliper with RBD cast iron disc ] 2011 -19 X Porsche 991 3.4 Carrera [ceramic brakes] 2011 - 15 X Porsche 991 3.8 Carrera S [ceramic brake caliper with RBD cast iron disc] 2011 -19 X Porsche 991 3.8 Carrera S [ceramic brakes] 2011 - 15 X Porsche 991 3.8 Carrera S / GTS [iron brakes] 2011 - 15 X Porsche 991.2 3.0 Carrera [ceramic brakes] 2015 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 2015 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 2015 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 2017 - 19 X Porsche 992 3.0 Carrera [iron brakes] 2020 + X Porsche 992 3.0 Carrera S [iron brakes] 2020 + X Porsche 992 3.0 Carrera 4S [iron brakes] 2020 + X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Girodisc Front Brake Pads 1741 Fits the Following Vehicles: Make Model Years Front Rear Porsche 991 Carrera / Carrera S / Carrera 4 / Carrera 4S 2012–2016 X Porsche 991.2 Carrera / Carrera S / GTS 2017–2019 X Porsche 992 Carrera / Carrera S / GTS 2020–Present X Porsche 718 Cayman GT4 2020–Present X Girodisc GP-Series Brake Pad Overview The Girodisc GP-Series brake pads in the 1741 shape deliver high-performance braking for Porsche 991, 992, and 718 GT4 applications. Engineered for consistent torque, stable friction, and excellent pedal feel, these pads are available in three compound options to match your driving style—from daily street use to full-time track duty. All three compounds fit the same front calipers and rotor setup, making it easy to select the level of performance you need. GP10 Street Compound  Designed for spirited daily driving, the GP10 compound offers fast cold bite, low noise, and low dust while maintaining stable performance during aggressive street use. GiroDisc GP30 - Endurance Race Compound  Built for long stints, the GP30 delivers consistent friction over extended sessions with reduced wear and excellent rotor friendliness—ideal for endurance racing or heavy track use. GiroDisc GP35  - Race Pad for All Occasions Our GP35 compound combines the best of both worlds into one all-around race pad. We took some of the longevity of our endurance pads, some of the bite of our sprint pads, and worked to develop a compound that can do it all. As a bonus, it’s easy to bed, which means less time figuring your brakes out, and more time driving on the track. The GP35 is designed to work with street car ABS as well as motorsport-grade ABS found in factory-built race cars. The torque curve is designed to be smooth and linear, which leads to superior modulation and release under trail braking. These pads work with a wide range of tires, from DOT street tires to R-compounds to full race slicks. It has become our most popular compound and is the compound we recommend most frequently to track day drivers and shops running cars in professional racing series. Note: this compound is only compatible with iron rotors. Girodisc GP-Series Pad FAQs Which compound is best for everyday street driving? GP10 is the recommended choice for daily use thanks to low dust, quiet operation, and reliable cold bite. Are the GP30 or GP35 compounds okay to use on the street? They can be used, but both are optimized for track temperatures and may produce more noise and dust when cold. Do these pads fit the factory Porsche iron rotors? Yes, all GP-Series 1741 pads are fully compatible with OEM iron rotors as well as Girodisc two-piece steel rotors. Do these pads require a bedding procedure? Yes, proper bedding is necessary to establish an even transfer layer and achieve maximum performance. Are the pad shapes the same across GP10, GP40, and GP30? Yes — all three compounds use the exact same 1741 pad shape and fit the same vehicles.

Ferodo FCP4713 Brake Pads Ferodo FCP4713 Rear Brake Pad Fitment Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brake caliper with RBD cast iron disc ] 11 -19 X Porsche 991 3.4 Carrera [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S [ceramic brake caliper with RBD cast iron disc] 11 -19 X Porsche 991 3.8 Carrera S [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S / GTS [iron brakes] 11 - 15 X Porsche 991.2 3.0 Carrera [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 15 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 17 - 19 X Porsche 992 3.0 Carrera [iron brakes] 20 -  X Porsche 992 3.0 Carrera S [iron brakes] 20 -  X Porsche 992 3.0 Carrera 4S [iron brakes] 20 -  X Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo Compound DS3.12 The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Ferodo Compound DS1.11 The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. Ferodo Compound DS2500 Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. Ferodo 11 FCP4713 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo 11 FCP4713 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo 11 FCP4713 Operating Temperature Comparison Chart Porsche 991 Carrera Brake Pads, Porsche 991 Carrera S Brake Pads, Porsche 991 Carrera 4S Brake Pads, Porsche 991 GTS Brake Pads, Porsche 991.2 Carrera S Brake Pads, Porsche Panamera 970 Brake Pads, Porsche Cayenne 955 Brake Pads, Porsche Cayenne GTS Brake Pads, Porsche Cayenne Turbo S Brake Pads, Ferodo FCP4713

Cobalt Brake Pads Porsche D1417 Racing Brake Pads (Rear) - 16mm Cobalt D1417 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brake caliper with RBD cast iron disc ] 11 -19 X Porsche 991 3.4 Carrera [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S [ceramic brake caliper with RBD cast iron disc] 11 -19 X Porsche 991 3.8 Carrera S [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S / GTS [iron brakes] 11 - 15 X Porsche 991.2 3.0 Carrera [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 15 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 17 - 19 X Porsche 992 3.0 Carrera [iron brakes] 20 -  X Porsche 992 3.0 Carrera S [iron brakes] 20 -  X Porsche 992 3.0 Carrera 4S [iron brakes] 20 -  X Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support. PASSION The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way. PERFORMANCE Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams. TECHNICAL EXCELLENCE Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.

GiroDisc 1417 Rear Racing Brake Pads  GP30-1417.16 Brake Pads Designed to deliver race-level performance on the street, these pads blend aggressive stopping power with rotor preservation, making them an ideal choice for motorsport enthusiasts who demand reliability and precision. The GiroDisc GP30 Endurance Race Pads feature a premium compound optimized for the unique demands of automotive racing and spirited street driving. Their advanced formulation guarantees a firm, predictable bite that enhances braking confidence during high-speed track sessions or aggressive daily driving. These pads are designed to maintain their grip under intense conditions without excessive fade or rotor wear. GP35-1417.16 Brake Pads Our GP35 compound combines the best of both worlds into one all-around race pad. We took some of the longevity of our endurance pads, some of the bite of our sprint pads, and worked to develop a compound that can do it all. As a bonus, it’s easy to bed, which means less time figuring your brakes out, and more time driving on the track. The GP35 is designed to work with street car ABS as well as motorsport-grade ABS found in factory-built race cars. The torque curve is designed to be smooth and linear, which leads to superior modulation and release under trail braking. These pads work with a wide range of tires, from DOT street tires to R-compounds to full race slicks. It has become our most popular compound and is the compound we recommend most frequently to track day drivers and shops running cars in professional racing series. GP40-1417.16 Brake Pads GP40 compound falls between a sprint and an endurance compound. It maintains good bite and pedal feel while being friendly to your rotors. They are a favorite among our track day customers and shares a lineage with compounds found on cars competing in legendary races like the 24 Hours of Le Mans. These pads have been race-tested and hold up to the brutal conditions on the track. GiroDisc 1417 FITMENT GUIDE: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brake caliper with RBD cast iron disc ] 11 -19 X Porsche 991 3.4 Carrera [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S [ceramic brake caliper with RBD cast iron disc] 11 -19 X Porsche 991 3.8 Carrera S [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S / GTS [iron brakes] 11 - 15 X Porsche 991.2 3.0 Carrera [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 15 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 17 - 19 X Porsche 992 3.0 Carrera [iron brakes] 20 -  X Porsche 992 3.0 Carrera S [iron brakes] 20 -  X Porsche 992 3.0 Carrera 4S [iron brakes] 20 -  X

Girodisc 1740 Brake Pads The Girodisc 1740 provides improved bite, smooth modulation, and consistent braking for Porsche drivers who want enhanced performance without excessive dust or noise. Ideal for spirited road use, these pads offer excellent cold bite and stable friction while remaining quiet and easy to control. They are a direct-fit option for Girodisc 2-piece rear rotor systems. Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 918 Spyder 13 - 15 X Porsche 991 GT3 [ceramic brakes] 15 - 18 X Porsche 991 GT3 [iron brakes] 15 - 18 X Porsche 991 GT3 RS [ceramic brakes] 15 - 18 X Porsche 991 GT3 RS [iron brakes] 15 - 18 X Porsche 991 Turbo [ceramic brakes] 13 - X Porsche 991 Turbo [iron brakes] 13 - X Porsche 991 Turbo S [ceramic brakes] 13 - X Porsche 991 Turbo S [iron brakes] 13 - X Porsche 991.2 GT2 RS [ceramic brakes] 18 - X Porsche 991.2 GT3 [ceramic brakes] 18 - X Porsche 991.2 GT3 [iron brakes] 18 - X Porsche 991.2 GT3 RS [ceramic brakes] 18 - X Porsche 991.2 GT3 RS [iron brakes] 18 - X Porsche 991 R [ceramic brakes] 16 - X Porsche 991 911 Speedster [iron brakes] 19 - X Porsche 992 3.0 Carrera 4S [ceramic brakes] 18- X Porsche 718 Cayman GT4 4.0 [982] [cast iron brakes] 19 - X Porsche 718 Cayman GT4 4.0 [982] [ceramic brakes] 19 - X Porsche Cayman GT4 [981] 16 - X Porsche Cayman GT4 [981] [ceramic brakes] 16 - X Porsche 992 Turbo [iron brakes] 2020 - X Porsche 992 GT3 [iron brakes] 2021 - X Porsche 992 Carrera S [ceramic brakes] 2018 - X Porsche 992 GT3 [ceramic brakes] 2021 - X Porsche 992 Turbo [ceramic brakes] 20 - X Porsche 718 Cayman GT4 4.0 RS [982] [cast iron brakes] 21 - X Porsche 718 Cayman GT4 4.0 RS [982] [ceramic brakes] 21 - X Note: Designed specifically for Girodisc rear two-piece steel rotors, not PCCB systems. GiroDisc GP10 Compound refined for the street but built to perform Designed for performance-minded drivers, the GP10 semi-metallic brake pads strike the perfect balance between daily drivability and occasional track use. Optimized for street conditions, they offer a quiet, lower-dust experience without sacrificing the confident stopping power you need when the pace picks up. Whether you're navigating traffic or hitting the occasional track day, these pads deliver a responsive pedal feel, excellent heat resistance, and consistent braking performance. Built for longevity and reliability, they’re the ideal upgrade for enthusiasts who want everyday comfort with the capability to push harder when it counts. For drivers planning extensive track sessions or more aggressive track driving, we recommend considering our dedicated race pads, engineered to handle the extreme heat and demands of frequent high-performance track use. GiroDisc GP30 Compound - endurance race pad Our GP30 compound is an all-around endurance race pad. The GP30 is designed to work with street car ABS as well as motorsport-grade ABS found in factory-built race cars. These pads work with a wide range of tires, from DOT street tires to R-compounds to full race slicks. GiroDisc GP35 Compound - A race pad for all occasions Our GP35 compound combines the best of both worlds into one all-around race pad. We took some of the longevity of our endurance pads, some of the bite of our sprint pads, and worked to develop a compound that can do it all. As a bonus, it’s easy to bed, which means less time figuring your brakes out, and more time driving on the track. The GP35 is designed to work with street car ABS as well as motorsport-grade ABS found in factory-built race cars. The torque curve is designed to be smooth and linear, which leads to superior modulation and release under trail braking. These pads work with a wide range of tires, from DOT street tires to R-compounds to full race slicks. It has become our most popular compound and is the compound we recommend most frequently to track day drivers and shops running cars in professional racing series. Note: this compound is only compatible with iron rotors. GiroDisc 1740 Features • High-performance street-focused compound• Low dust and reduced noise levels• Strong cold bite for daily street use• Smooth, predictable pedal modulation• Stable friction across a broad temperature range• Direct-fit for Girodisc rear brake systems• Sold/priced per rear axle set GiroDisc 1740 Specifications • Compound: GP10 Street Performance• Position: Rear• Compatibility: Girodisc steel rotors• Operating Range: Optimized for street temperatures• Includes: One complete set of rear brake pads Girodisc 1740.18 Rear Pad FAQs Are these pads quiet enough for daily use? Yes. The GP10 compound is engineered to minimize noise and vibration while delivering excellent braking feel. Can these pads be used with OEM Porsche rotors? While they may physically fit, they are optimized for performance and wear when paired with Girodisc two-piece rotors. Are these suitable for track days? They can handle light HPDE use, but for full track sessions a more aggressive compound like Girodisc GP30 or the best selling GP35 are recommended. Do these pads create less dust than OEM pads? Yes. GP10 pads produce noticeably less dust, helping keep your wheels cleaner. How do these compare to factory Porsche performance pads? GP10 pads offer smoother modulation, better cold bite, and significantly reduced dust, making them ideal for spirited street driving. Enhance your Porsche's rear braking confidence with Girodisc GP10 Street Pads GP10-1740.18 — engineered for clean, quiet, and consistent performance.

PFC Brake Pads 7690.332.16.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. The folks at PFC take pride in the accomplishments of the drivers and race teams that run PFC products. With More Championships than Any Other™, PFC are among the best racing brakes on the market. Known around the globe in the sports car market, PFC is involved with numerous sports car events including: IMSA Continental Tire Sports Car Challenge Porsche Cup Racing Pirelli World Challenge PFC 7690 Fitments: Make Model Build (Year) Front Rear Porsche 991 3.4 Carrera [ceramic brake caliper with RBD cast iron disc ] 11 -19 X Porsche 991 3.4 Carrera [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S [ceramic brake caliper with RBD cast iron disc] 11 -19 X Porsche 991 3.8 Carrera S [ceramic brakes] 11 - 15 X Porsche 991 3.8 Carrera S / GTS [iron brakes] 11 - 15 X Porsche 991.2 3.0 Carrera [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [ceramic brakes] 15 - 19 X Porsche 991.2 3.0 Carrera S [iron brakes] 15 - 19 X Porsche 991.2 3.0 Carrera GTS [iron brakes] 17 - 19 X Porsche 992 3.0 Carrera [iron brakes] 20 -  X Porsche 992 3.0 Carrera S [iron brakes] 20 -  X Porsche 992 3.0 Carrera 4S [iron brakes] 20 -  X With over 35 years of friction knowledge and on-track experience, PFC's process enables them to provide you with the proper friction every time. No Compromises All PFC pad compounds have been thoroughly processed and are “race ready”. That means very easy burnishing to bed pads and rotors. PFC 332 Compound PFC 332 has been formulated with lower bite and torque for rear brake applications. With a smooth release, the PFC 332 compound offers excellent stability and control. PFC 332 has been designed to work with ABS applications and has exceptionally low wear rates.

Race Technologies Front Brake Pad - 2426.17 Fitment guide Race Technologies 2426.17 Brake Pad Make Model Build (Year) Front Rear Porsche 991 3.8 Carrera S / GTS [iron brakes] 11 - 19 X Porsche Boxster Spyder [981] 15 - 20 X RE10 COMPOUND Race Technologies RE10 is the ultimate endurance race compound, offering a balance of excellent stopping power, low thermal conductivity, and extremely low pad and rotor wear. Utilizing the latest friction material technology, RE10 offers consistent performance under the most demanding of environments. Typical Applications: Professional Endurance Racing, Club Racing, and HPDE on high demand brake platforms. TS20 COMPOUND The Race Technologies TS20 is the ideal dual purpose compound for street and light track use. The TS20 combines an aggressive initial bite, good heat resistance all while keeping dust and noise to a minimum.  Note: RE10 is a "racing use only" pad. Running a "racing use only" pad on the street could produce excessive noise and dust.Disc wear could be accelerated if driven at cold temperatures or used in the incorrect temperature range. Racing pads are designed to work in specific temperature ranges, so it's important to choose the right compound for the environment the vehicle will be used in. Pad compounds are run on a brake dynamometer over multiple brake applications ("stops") to test the materials in a controlled environment and obtain accurate data. Wear rates and operating temperatures can be influenced by car set-up, grip levels, track layout, and other variables.