Club Benefits

Lamborghini Gallardo Super Trofeo Front Rotors (Girodisc A1-168) The Girodisc Front Rotor set for the Lamborghini Gallardo Super Trofeo delivers world-class braking performance for one of the most demanding race platforms. Designed as a direct replacement for the original equipment rotors, these two-piece rotors significantly reduce unsprung and rotating mass while improving cooling and braking consistency under extreme heat. Vehicle Fitment Girodisc A1-168 This Girodisc front rotor set fits the following Lamborghini models: Lamborghini Gallardo LP560 Super Trofeo Lamborghini Gallardo LP570-4 Super Trofeo May also fit other Gallardo race variants using the OEM Super Trofeo front brake system These rotors install directly with the factory calipers and hardware—no modifications required. Performance and Design By replacing the heavy factory rotors with lightweight Girodisc two-piece units, drivers experience improved suspension response, reduced brake fade, and enhanced pedal consistency. The aluminum hat is CNC-machined from U.S.-sourced 6061-T6 aircraft-grade material, while the friction rings are made from Girodisc’s proprietary cast iron for maximum strength and heat stability. The internal curved vane design acts as a centrifugal pump, pulling air through the disc for superior cooling efficiency under sustained track use. Features - Direct replacement for OEM Super Trofeo front rotors; no modifications required. - Two-piece floating rotor assembly reduces unsprung and rotating weight. - 6061-T6 aluminum hat paired with proprietary cast iron rings for optimal rigidity and heat management. - Curved vane design ensures efficient airflow and cooling during high-performance driving. - Floating mount system with 12 high-strength alloy steel drive pins allows controlled axial and radial float. - Anti-noise spring washers eliminate rattle and vibration during street or pit operations while allowing thermal expansion. - Cadmium-plated hardware and class 12.9 fasteners provide long-term corrosion resistance. - Designed, cast, and machined entirely in the USA to Girodisc’s motorsport-grade tolerances. Specifications Rotor Type: Two-piece floatingMaterial: Proprietary cast iron with 6061-T6 aluminum hatHardware: 12 high-strength alloy steel drive pins with spring washersFitment: Lamborghini Gallardo Super Trofeo front axleInstallation: Direct bolt-on to factory calipersSold as: Pair (left and right front rotors) FAQs: Lamborghini Gallardo Super Trofeo Front Rotors (Girodisc) Are these rotors compatible with the OEM Super Trofeo calipers? Yes. They are a direct bolt-on fit designed specifically for the Gallardo Super Trofeo braking system. What advantages do these rotors offer over OEM? They deliver reduced weight, improved cooling capacity, faster suspension response, and better braking consistency over long sessions. Will they produce noise or rattle? No. The use of anti-noise spring washers allows the discs to expand freely under heat without producing unwanted vibration or rattle. Can the rotors be serviced? Yes. When the iron friction rings wear out, they can be replaced independently while retaining the original aluminum hats and hardware. Ordering Information Sold and priced per pair. Includes left and right Girodisc front rotors for the Lamborghini Gallardo Super Trofeo.

Focus RS Front Rotors (Girodisc A1-169) The Girodisc Front Rotor set for the Ford Focus RS offers a precision-engineered upgrade over the factory rotors, delivering improved heat management, reduced unsprung weight, and exceptional durability. Designed as a direct replacement for the OEM discs, these rotors bolt on with no modifications required, maintaining the factory brake bias and ABS performance while enhancing responsiveness and acceleration. Vehicle Fitment This Girodisc front rotor set is designed specifically for: Ford Focus RS (2016–2018) Fits directly to the factory calipers and hubs with no adapters or modifications required. Performance and Design Each Girodisc rotor weighs approximately 18.0 lbs compared to the OEM 23.1 lbs, reducing rotating and unsprung mass for improved handling, acceleration, and suspension control. The two-piece floating rotor design features a central hat machined from U.S.-sourced 6061-T6 aircraft-grade aluminum paired with a proprietary cast iron friction ring, both developed and machined in the USA. The 48 curved directional vanes act as a centrifugal pump, drawing cooling air through the rotor to manage heat during heavy braking. Girodisc A1-169 Features - Direct bolt-on replacement for OEM rotors; no modifications required. - Two-piece floating rotor design reduces unsprung and rotational mass for sharper handling. - 6061-T6 aluminum hat and proprietary cast iron rotor ring deliver strength and heat dissipation. - 48 curved directional vanes promote superior cooling under track and spirited driving conditions. - Floating mount system with 8–10 high-strength alloy steel drive pins allows for axial and radial float. - Anti-noise spring washers minimize rattle while maintaining free thermal expansion of the disc. - Grade 12 hardware and cadmium-plated pins ensure long-term corrosion resistance. - Maintains factory ABS and brake bias for consistent braking performance. - Designed, cast, and machined entirely in the USA to motorsport-level tolerances. Specifications Rotor Type: Two-piece floatingVane Count: 48 curved directionalWeight: 18.0 lbs each (stock 23.1 lbs)Material: Proprietary cast iron with 6061-T6 aluminum hatHardware: 8–10 alloy steel drive pins with anti-noise spring washersFitment: Ford Focus RS (2016–2018)Sold as: Pair (left and right front rotors) FAQs: Ford Focus RS Front Rotors (Girodisc) Do these rotors work with the OEM calipers? Yes, they are a direct replacement and bolt on using the stock calipers without any modifications. What are the main performance benefits? Reduced unsprung weight and improved thermal management result in quicker acceleration, sharper handling, and more consistent braking during aggressive driving or track use. Are these rotors noisy during daily driving? No. The spring washers eliminate the rattle commonly found in floating rotors while still allowing full thermal float. Can the rotors be rebuilt? Yes. Once installed, only the iron rings need to be replaced when worn, while the aluminum hats and hardware can be reused according to Girodisc’s service guidelines. Ordering Information Sold and priced per pair. Includes left and right Girodisc 2-piece floating front rotors for the 2016–2018 Ford Focus RS.

Acura NSX Front Rotors (Girodisc) – A1-174 Girodisc two-piece front rotors for the Acura NSX are a direct bolt-on upgrade that reduce unsprung and rotating mass, sharpen response, and improve cooling while maintaining factory brake bias and ABS performance. These rotors are compatible with cars originally equipped with iron or carbon-ceramic front rotors; note the pad shape requirement below. Pad shape note for carbon-ceramic cars For vehicles originally fitted with carbon-ceramic front rotors, you must switch to the D1405 front pad shape to use these rotors. Contact us if you need help selecting compatible pads. Features of Girodisc A1-174 Direct replacement for the OE front discs; no permanent modifications required. Two-piece construction with a US-sourced 6061-T6 aluminum hat and proprietary cast-iron disc for high thermal stability. Curved-vane internal design acts as a centrifugal pump to move cooling air through the rotor at speed. Floating mount system uses high-strength alloy steel drive pins with spring washers to allow controlled float, reduce noise when cold, and let the disc expand evenly under heat. Lower rotating and unsprung mass improves acceleration, steering feel, and suspension response. Factory brake bias and ABS calibration are preserved. Service-friendly design lets you replace only the iron rings when worn. What’s included One left and one right front rotor (sold and priced as a pair). FAQs: Acura NSX Front Rotors (Girodisc A1-174) Do these fit NSX models with carbon-ceramic front brakes? Yes. They fit both iron and carbon-ceramic applications, but carbon-ceramic cars must switch to the D1405 pad shape on the front calipers. Are any caliper spacers or brackets required? No spacers or brackets are required for installation with the factory calipers. Will these change pedal feel or ABS behavior? No. Rotor dimensions and effective radius are engineered to maintain factory bias and ABS operation while improving thermal capacity and weight. Are they noisy like some floating race rotors? The floating system uses spring washers to minimize rattle at low temperatures while still allowing thermal growth under heavy use. How do I service them later? When the friction rings wear out, you can replace just the iron rings and reuse the aluminum hats and hardware per manufacturer guidelines. Fitment and ordering Acura NSX front axle. Verify pad shape if converting from carbon-ceramic (use D1405 in front). Sold as a matched left and right pair under SKU A1-174.

Girodisc Lamborghini Gallardo Super Trofeo Rear Rotors Take your Gallardo Super Trofeo’s braking performance to the next level with Girodisc’s precision-engineered 380mm rear rotors. These lightweight, two-piece rotors replace the factory 365mm units and include caliper spacers for a seamless fit. The result is improved cooling, sharper response, and reduced unsprung weight—essential upgrades for serious racers and track-day drivers. Racing-Grade Design for the Gallardo Super Trofeo Each Girodisc rotor features a CNC-machined 6061-T6 aluminum hat paired with Girodisc’s proprietary cast iron friction ring, both made in the USA. The curved vane design works as a centrifugal pump, forcing air through the disc to manage heat under extreme braking loads. The floating two-piece system allows thermal expansion without distortion, maintaining perfect pad contact and pedal feel lap after lap. Features • Direct replacement for OEM rear rotors – includes required caliper spacers• Increases rotor diameter from 365mm to 380mm for greater heat capacity• Lightweight 6061-T6 aluminum hats with anodized finish• Proprietary high-carbon cast iron rings cast and machined in the USA• Floating mount system with 12 cadmium-plated steel drive pins• Anti-noise spring washers eliminate rattle while maintaining proper float• Curved internal vanes maximize airflow for cooling• Approx. 24.5 lbs vs. 27 lbs for factory units – reduced rotational and unsprung weight• Fully rebuildable—replace only the rotor rings when worn• Sold/priced per pair Vehicle Fitment Lamborghini Gallardo Super Trofeo (All years)Includes caliper spacers for use with OEM Brembo calipers and factory hub assembly. Girodisc A2-168 Rear Rotor FAQs: Do these rotors fit directly onto the Super Trofeo without modification? Yes. They’re designed as a direct replacement for OEM rotors, and include the necessary caliper spacers to accommodate the larger 380mm size. Why upgrade from 365mm to 380mm? The larger rotor provides increased thermal capacity and greater mechanical leverage for improved braking performance under sustained track use. How much weight savings can I expect? Each Girodisc rotor is about 2.5 lbs lighter than the OEM unit, reducing both unsprung and rotational mass for better handling and acceleration. Are these suitable for endurance racing? Yes. Girodisc rotors are proven in long-duration competition, offering excellent temperature stability and resistance to warping over repeated heat cycles. Experience the precision, reliability, and stopping confidence your Gallardo Super Trofeo deserves with Girodisc’s 380mm rear rotor upgrade—purpose-built for the demands of serious track performance.

Girodisc Acura NSX Rear Rotors Bring world-class braking performance to your Acura NSX with Girodisc’s lightweight two-piece rear rotors. Designed as a direct OEM replacement, these rotors reduce unsprung weight, improve cooling, and deliver consistent pedal feedback for the hybrid supercar’s advanced braking system. Engineered for Precision and Performance The Girodisc system bolts directly to the NSX’s factory calipers and hubs—no modifications required. Each rotor is built around a CNC-machined 6061-T6 aluminum hat paired with Girodisc’s proprietary high-carbon cast iron friction rings. This floating two-piece construction allows for thermal expansion without warping, ensuring smooth, consistent braking whether you’re carving through mountain roads or attacking apexes at the track. Features • Direct replacement for OEM Acura NSX rear rotors• Lightweight two-piece design reduces unsprung and rotational mass• U.S.-sourced 6061-T6 billet aluminum hats with hard anodized finish• Proprietary high-carbon cast iron rings poured and machined in the USA• Floating mount system with cadmium-plated drive pins and anti-noise washers• Curved vane internal design promotes superior airflow and cooling• Fully rebuildable—replace only the iron rings when worn• Sold/priced per pair Vehicle Fitment Acura NSX (2017–2022, all variants)Compatible with OEM Brembo rear calipers and factory braking hardware. Girodisc A2-174 Rear Rotor FAQs: Is this rotor setup compatible with the NSX’s hybrid regenerative braking system? Yes. Girodisc rotors integrate perfectly with the NSX’s factory electronics and regenerative braking calibration—no software or sensor changes needed. How much lighter are these than stock rotors? Each Girodisc rotor saves several pounds over the factory cast units, reducing unsprung weight and improving suspension response. Can I use factory brake pads with these rotors? Absolutely. Girodisc rotors are fully compatible with OEM pad shapes, or you can upgrade to performance compounds for track use. What difference will I notice on track? Expect more consistent braking during long sessions, improved modulation, and reduced fade under high-temperature conditions thanks to Girodisc’s curved vane cooling design. Unlock sharper braking response and race-proven durability with Girodisc rear rotors for the Acura NSX—engineered to perform flawlessly on road and track alike.

BBS FI BMW Forged Line Exclusive Wheels Call and talk to a Competition Motorsport custom wheel specialist at (844) 438-7244. We'll make sure you get the set of wheels you've always wanted at a price no one can beat. BBS FI BMW Forged Line Exclusive Series wheels are one-piece forged aluminum wheels designed and produced in the BBS Motorsports Department. The FI are the ultimate wheels for performance-minded or track-bound BMW drivers. Covered by U.S. Pat. D606,921 and European OHIM Reg. No. 000 803 952 WHEEL WEIGHTS 20x9.5: 19.4 lbs. 20x10.5: 21.0 lbs. While many popular fitments are stocked and ready to ship, some fitments are made to order, increasing lead times. Check with a Competition Motorsport wheels specialist at (844) 438-7244 for a complete quote and estimated lead time. Prices and weights are per wheel.

BBS FI-R Audi/Lamborghini Forged Line Exclusive Wheels BBS FI-R Forged Line Exclusive Wheels are one piece forged aluminum wheels designed and produced in the BBS Motorsports department. These are the ultimate wheels for performance-minded or track-bound Audi and Lamborghini owners. WHEEL WEIGHTS 20x9.0: 17.9 lbs. 20x9.5: 18.8 lbs. 20x11.5: 20.05 lbs. While many popular fitments are stocked and ready to ship, some fitments are made to order, increasing lead times. Talk with a Competition Motorsport wheels specialist at (844) 438-7244 for a complete quote and estimated lead time. "PFS" centerbore designation means the wheel comes with the BBS Precision Fitment System. Prices and weights are per wheel.

BBS FI Ferrari Forged Line Exclusive Wheels BBS FI Ferrari Forged Line Exclusive Series wheels are one-piece forged aluminum wheels designed and produced by the renowned BBS Motorsports Department. They are the ultimate wheels for performance-minded or track-bound Ferrari owners. Covered by U.S. Pat. D606,921 and European OHIM Reg. No. 000 803 952. FEATURES One-Piece Forged Aluminum Wheels designed and produced in the BBS Motorsports department Wheels require the OEM Ferrari center caps WHEEL WEIGHTS 19x8.75: 17.5 lbs. 19x11.25: 20.3 lbs. 20x8.75: 19.7 lbs. 20x10.75: 22.55 lbs. While many popular fitments are stocked and ready to ship, some fitments are made to order, increasing lead times. Talk with a Competition Motorsport wheels specialist at (844) 438-7244 for a complete quote and estimated lead time. Prices and weights are per wheel.

BBS RI-S 2-Pc Forged Line Exclusive Wheels Call and talk to a Competition Motorsport custom wheel specialist at (844) 438-7244. We'll make sure you get the set of wheels you've always wanted at a price no one can beat. BBS RI-S Two-Piece Forged Line Exclusive Wheels are forged aluminum wheels designed and produced in the renowned BBS Motorsports Department. The RI-S two-piece wheels use titanium fasteners and the rims are machined using a BBS-patented process to reduce weight. They all come with a diamond-cut rim and clear protective top coat. All RI-S 2-Pc Forged Line Exclusive wheel weights are optimized using FEA (Finite Element Analysis). FEATURES Two-piece forged aluminum wheel. Titanium fasteners. Rim sections machined using a BBS patented process to reduce weight. Weight optimized by FEM analysis. WHEEL WEIGHTS 20x8.5: 24.5 lbs. 20x9.0: 26.0 lbs. 20x10.0: 26.0 lbs. While many popular fitments are stocked and ready to ship, some fitments are made to order, increasing lead times. Check with a Competition Motorsport wheels specialist at (844) 438-7244 for a complete quote and estimated lead time. "PFS" centerbore designation means the wheel comes with the BBS Precision Fitment System. Prices and weights are per wheel.

BBS RI-D Forged Line Exclusive Wheels Call and talk to a Competition Motorsport custom wheel specialist at 844-438-7244. We'll make sure you get the set of wheels you've always wanted at a price no one can beat. BBS RI-D Forged Line Exclusive Wheels are one-piece forged aluminum wheels designed and produced by BBS Japan using a special 7000-series aluminum, giving these wheels the ultimate combination of lightness and strength. The RI-D by BBS is unlike nearly any other wheel on the market today. Covered by U.S. Pat. D606,921 and European OHIM Reg. No. 000 803 952 Available in Diamond Black with protective top coat only. WHEEL WEIGHTS 20x9.0: 18.35 lbs. 20x10.0: 18.65 to 19.3 lbs. While many popular fitments are stocked and ready to ship, some fitments are made to order, increasing lead times. Talk with a Competition Motorsport wheels specialist at (844) 438-7244 for a complete quote and estimated lead time. "PFS" centerbore designation means the wheel comes with the BBS Precision Fitment System. Prices and weights are per wheel.

BBS FS Die-Forged Line Exclusive Wheels (Bolt Pattern 5 x 112) Call and talk to a Competition Motorsport custom wheel specialist at (844) 438-7244. We'll make sure you get the set of wheels you've always wanted at a price no one can beat. The Die-Forged Series of wheels by BBS offers exceptional weight savings through industry-leading FEA (Finite Element Analysis) without compromising design, strength or build quality. Available in a wide range of sizes, finishes and bolt patterns, the Die-Forged Series offers legendary BBS quality for nearly every application. WHEEL WEIGHTS 19x8.0: 20.6 lbs. 19x8.5: 20.2 lbs. 19x9.0: 20.5 lbs. 19x9.5: 22.2 lbs. FEATURES Bolt Pattern: 5 x 112 One-Piece Die Forged Aluminum Wheel Weight optimized by FEM analysis Centerbore: PFS (Precision Fitment System) While many popular fitments are stocked and ready to ship, some fitments are made to order, increasing lead times. Check with a Competition Motorsport wheels specialist at (844) 438-7244 for a complete quote and estimated lead time. Some finishes may not be available on all fitments. Prices and weights are per wheel.

BBS RF Die-Forged Line Exclusive Wheels Call and talk to a Competition Motorsport custom wheel specialist at (844) 438-7244. We'll make sure you get the set of wheels you've always wanted at a price no one can beat. The Die-Forged Series of wheels by BBS offer exceptional weight savings through industry-leading FEM analysis without compromising design or build quality. Available in a wide range of sizes, finishes and bolt patterns the Die-Forged Series has something for everyone. Available in Diamond Black with protective top coat only. FEATURES One-Piece Die Forged Aluminum Wheel Weight optimized by FEM analysis WHEEL WEIGHTS 17x7.5: 15.6 lbs. 18x8.0: 18.0 lbs. 18x8.5: 19.1 lbs. 18x9.0: 18.1 lbs. PLEASE NOTE Centerbore: PFS (Precision Fitment System). While many popular fitments are stocked and ready to ship, some fitments are made to order, increasing lead times. Check with a Competition Motorsport wheels specialist for a complete quote and estimated lead time. Prices and weights are per wheel.

BBS RE-V Die-Forged Series Exclusive Wheels Call and talk to a Competition Motorsport custom wheel specialist at (844) 438-7244. We'll make sure you get the set of wheels you've always wanted at a price no one can beat. The Die-Forged Series of wheels by BBS offers exceptional weight savings through industry-leading FEM analysis without compromising design or build quality. Available in a wide range of sizes, finishes and bolt patterns, the Die-Forged Series from BBS has something for everyone. Available in Diamond Silver with protective top coat only. FEATURES One-Piece Die Forged Aluminum Wheel BBS Patented Milling Process inside the spoke area Weight optimized by FEM analysis WHEEL WEIGHTS 19x9.0: 23.9 lbs. 19x10.0: 25.0 lbs. While many popular fitments are stocked and ready to ship, some fitments are made to order, increasing lead times. Check with a Competition Motorsport wheels specialist for a complete quote and estimated lead time. "PFS" centerbore designation means the wheel comes with the BBS Precision Fitment System. Prices and weights are per wheel.

BBS SX Design Line Wheels THE INNOVATIVE NEWCOMER IN FRESH DOUBLE-SPOKE DESIGN Thia one-piece newcomer with a fresh double-spoke design and BBS design elements is produced exclusively in Germany. The SX wheel is manufactured using the low-pressure casting process, and is available in brilliant silver and crystal black (special-effect paint)  with a General Operating Permit (German abbreviation: ABE) for a variety of vehicles. In addition, for the first time there are ECE fitments – and thus Europe-wide registration-free – wheel applications in 17 and 18 inches in the program. Compatibility with standard tire pressure monitoring systems, a special coating and the unrestricted suitability for snow chains ensure enjoyment of the product. CLICK HERE FOR A FULL LIST OF SX APPLICATIONS Available in these dimensions: 17 x 7.5 18 x 8.0 19 x 8.5 20 x 9.0 Design Line wheels by BBS are a one-piece counter pressure cast wheel with FEM optimized weight savings. Available in a wide range of sizes, finishes and bolt patterns the BBS Design Line has something for everyone. Not all finish options may be available on all fitments, and some finish options will increase wheel cost. Please call us for a proper quote for wheels customized to your specifications. WHEEL WEIGHTS 17-inch: 24.6 to 25.3 lbs. 18-inch: 28.4 to 29.3 lbs. 19-inch: 29.9 to 31 lbs. 20-inch: 35.3 to 36.3 lbs. While many popular fitments are stocked and ready to ship, some fitments are made to order which can increase lead time. Please check with a Competition Motorsport wheels specialist for a complete quote and estimated lead time. "PFS" centerbore designation means the wheel comes with the BBS "Precision Fitment System".

Pagid Racing Brake Pad Shape 1141 Fitment Guide for Pagid 1141 Brake Pads Make Model Build (Year) Front Rear BMW 318is - 325i [E30] 82 - 93 X   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid 1141 Brake Pad RSL 19 Compound Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars.

Pagid Racing Brake Pad Shape No. 4623 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 924 2.0 1976 - 83 X Porsche 924 2.0 Turbo / 2.5 S 1979 - 88 X Porsche 928 4.5 1977 - 79 X Porsche 944 2.5/2.5 S/2.7 1981 - 91 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSH 42 Historic Compound: The characteristics of Pagid RSH 42 make this material appropriate for small formula cars. Furthermore you can use it as rear axle compound in combination with the RSH 29E on the front axle. An excellent classic rally pad which is also very popular in small formula cars.