GiroDisc Titanium Brake Pad Heat Shields for Chevrolet Corvette C6 Z06 1-piece Pad - TS-1185-4
$125.00
GiroDisc Titanium Brake Pad Heat Shields for Chevrolet Corvette C6 Z06 1-piece Pad - TS-1185-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for Chevrolet Corvette C6 Z06 1-piece Pad (TS-1185-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-1185-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Depends on the specified caliper / brake pad shape
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: Chevrolet Corvette C6 Z06 1-piece Pad
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Chevrolet Corvette C6 Z06: front brakes using the one-piece pad configuration
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-1185-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for Porsche 997 GT3 / GT2 / Turbo Rear - TS-1300-4
$100.00
GiroDisc Titanium Brake Pad Heat Shields for Porsche 997 GT3 / GT2 / Turbo Rear - TS-1300-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for Porsche 997 GT3 / GT2 / Turbo Rear (TS-1300-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-1300-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Rear
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: Porsche 997 GT3 / GT2 / Turbo Rear
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Porsche 911 997 GT3: compatible rear brake package
Porsche 911 997 GT2: compatible rear brake package
Porsche 911 997 Turbo: compatible rear brake package
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-1300-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for Brembo 6-piston D55 Caliper - TS-1365-4
$125.00
GiroDisc Titanium Brake Pad Heat Shields for Brembo 6-piston D55 Caliper - TS-1365-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for Brembo 6-piston D55 Caliper (TS-1365-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-1365-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Depends on the specified caliper / brake pad shape
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: Brembo 6-piston D55 Caliper
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Caliper / pad-shape application: Brembo 6-piston caliper using D55 pad shape. Vehicle model alone does not establish fitment; confirm your installed caliper and pad shape before ordering.
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-1365-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for Front 1382 / 1405 Pad Shape - TS-1382-4
$125.00
GiroDisc Titanium Brake Pad Heat Shields for Front 1382 / 1405 Pad Shape - TS-1382-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for Front 1382 / 1405 Pad Shape (TS-1382-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-1382-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Front
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: Front 1382 / 1405 Pad Shape
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Caliper / pad-shape application: Front caliper using 1382 or 1405 pad shape. Vehicle model alone does not establish fitment; confirm your installed caliper and pad shape before ordering.
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-1382-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for Front 1389 Pad Shape - TS-1389-4
$125.00
GiroDisc Titanium Brake Pad Heat Shields for Front 1389 Pad Shape - TS-1389-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for Front 1389 Pad Shape (TS-1389-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-1389-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Front
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: Front 1389 Pad Shape
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Caliper / pad-shape application: Front caliper using 1389 pad shape. Vehicle model alone does not establish fitment; confirm your installed caliper and pad shape before ordering.
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-1389-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for BMW F8X 6-piston Caliper - TS-1648-4
$125.00
GiroDisc Titanium Brake Pad Heat Shields for BMW F8X 6-piston Caliper - TS-1648-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for BMW F8X 6-piston Caliper (TS-1648-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-1648-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Depends on the specified caliper / brake pad shape
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: BMW F8X 6-piston Caliper
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
BMW F8X-platform performance models: only with the matching 6-piston brake caliper
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-1648-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for Rear 1718 Pad Shape - TS-1718-4
$100.00
GiroDisc Titanium Brake Pad Heat Shields for Rear 1718 Pad Shape - TS-1718-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for Rear 1718 Pad Shape (TS-1718-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-1718-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Rear
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: Rear 1718 Pad Shape
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Caliper / pad-shape application: Rear caliper using 1718 pad shape. Vehicle model alone does not establish fitment; confirm your installed caliper and pad shape before ordering.
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-1718-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for Porsche 991 / 992 / GT4 Front - TS-1741-4
$125.00
GiroDisc Titanium Brake Pad Heat Shields for Porsche 991 / 992 / GT4 Front - TS-1741-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for Porsche 991 / 992 / GT4 Front (TS-1741-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-1741-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Front
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: Porsche 991 / 992 / GT4 Front
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Porsche 911 991 / 992: compatible front brakes with the specified pad shape
Porsche Cayman GT4 / 718 GT4: compatible front brakes; verify iron versus PCCB package
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-1741-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for Ford Mustang GT350 Front - TS-1853-4
$125.00
GiroDisc Titanium Brake Pad Heat Shields for Ford Mustang GT350 Front - TS-1853-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for Ford Mustang GT350 Front (TS-1853-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-1853-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Front
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: Ford Mustang GT350 Front
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Ford Mustang Shelby GT350 and GT350R: compatible front caliper / pad configuration
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-1853-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for Brembo M Caliper - TS-M-4
$125.00
GiroDisc Titanium Brake Pad Heat Shields for Brembo M Caliper - TS-M-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for Brembo M Caliper (TS-M-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-M-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Depends on the specified caliper / brake pad shape
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: Brembo M Caliper
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Caliper / pad-shape application: Brembo M caliper (confirm version and pad backing plate). Vehicle model alone does not establish fitment; confirm your installed caliper and pad shape before ordering.
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-M-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for StopTech ST60 Caliper - TS-2600-4
$125.00
GiroDisc Titanium Brake Pad Heat Shields for StopTech ST60 Caliper - TS-2600-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for StopTech ST60 Caliper (TS-2600-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-2600-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Depends on the specified caliper / brake pad shape
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: StopTech ST60 Caliper
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Caliper / pad-shape application: StopTech ST-60 / STR-60 6-piston calipers. Vehicle model alone does not establish fitment; confirm your installed caliper and pad shape before ordering.
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-2600-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for C8 Z51 Front - TS-4005-4
$125.00
GiroDisc Titanium Brake Pad Heat Shields for C8 Z51 Front - TS-4005-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for C8 Z51 Front (TS-4005-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-4005-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Front
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: C8 Z51 Front
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Chevrolet Corvette C8 Z51: front brakes with the specified pad shape
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-4005-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for 2018+ Subaru STI Rear - TS-6027-4
$100.00
GiroDisc Titanium Brake Pad Heat Shields for 2018+ Subaru STI Rear - TS-6027-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for 2018+ Subaru STI Rear (TS-6027-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-6027-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Rear
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: 2018+ Subaru STI Rear
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Subaru WRX STI 2018 and later: compatible rear brake package
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-6027-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for AP Racing CP7040 Caliper - TS-CP7040-4
$125.00
GiroDisc Titanium Brake Pad Heat Shields for AP Racing CP7040 Caliper - TS-CP7040-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for AP Racing CP7040 Caliper (TS-CP7040-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-CP7040-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Depends on the specified caliper / brake pad shape
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: AP Racing CP7040 Caliper
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Caliper / pad-shape application: AP Racing CP7040 caliper. Vehicle model alone does not establish fitment; confirm your installed caliper and pad shape before ordering.
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-CP7040-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for Audi / Lamborghini Front - TS-1029-8
$200.00
GiroDisc Titanium Brake Pad Heat Shields for Audi / Lamborghini Front - TS-1029-8
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for Audi / Lamborghini Front (TS-1029-8). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-1029-8
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Front
Material: Titanium
Package Quantity: Eight shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: Audi / Lamborghini Front
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
Select Audi and Lamborghini models using the matching front pad shape and caliper; vehicle fitment must be checked before purchase: Confirm matching caliper and backing plate before ordering.
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-1029-8 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.
GiroDisc Titanium Brake Pad Heat Shields for BMW F8X 4-piston Front Caliper - TS-1880-4
$125.00
GiroDisc Titanium Brake Pad Heat Shields for BMW F8X 4-piston Front Caliper - TS-1880-4
Help protect your performance braking system from excess heat transfer with the GiroDisc Titanium Brake Pad Heat Shields for BMW F8X 4-piston Front Caliper (TS-1880-4). Thin titanium pad shields install between the brake pad backing plate and caliper pistons to reduce heat conduction into brake fluid and caliper components during demanding braking.
Precision Titanium Pad Shields for Performance Brakes
Braking converts vehicle speed into heat. GiroDisc titanium shields add a low-conductivity barrier between hot brake pads and the caliper pistons. They can help manage caliper heat during repeated track sessions, but do not replace appropriate brake fluid, cooling, or routine inspections.
Features
Heat-transfer barrier: Helps slow conduction of brake pad heat into the caliper pistons.
Titanium construction: Low thermal conductivity compared with steel or aluminum.
Application-specific cut: Designed for the stated pad shape or caliper, not universal fitment.
Performance use: Useful for track days and repeated high-load braking.
Simple service concept: Installs between compatible brake pad backing plates and caliper pistons with adequate clearance.
Specifications
Brand: GiroDisc
SKU: TS-1880-4
Product Type: Titanium Brake Pad Heat Shields
Brake Position: Front
Material: Titanium
Package Quantity: Four shields (manufacturer SKU packaging; confirm contents before shipping)
Fitment: BMW F8X 4-piston Front Caliper
Installation: Between compatible brake pad and caliper pistons
Vehicle Fitment
BMW M2 (F87), M3 (F80), and M4 (F82/F83): compatible 4-piston front calipers; check factory brake option
Important Fitment Note: Brake pad shape and installed caliper take precedence over vehicle name, model year and trim. Different factory or aftermarket brake packages may require different shields. Confirm pad dimensions and installation clearance before ordering.
Why Use Titanium Heat Shields?
Titanium conducts less heat than common brake-system metals, helping reduce heat transfer into pistons, seals, dust boots and fluid. These shields are an additional thermal-management measure, not a guarantee against brake-fluid boiling.
Installation and Compatibility
Inspect calipers, pad hardware, pads and existing shims; confirm there is sufficient clearance for the shields. Follow the caliper manufacturer's brake-service instructions and verify normal pad movement and brake operation after installation. Do not force an incompatible pad-shape shield into place.
Frequently Asked Questions
Will TS-1880-4 fit my car? Match the exact installed caliper and pad backing plate to the listed application. Model name alone is not sufficient.
How do GiroDisc titanium shields work? They sit between brake pads and caliper pistons to reduce conductive heat transfer.
Are brake pads or rotors included? No. This product is a titanium pad shield kit; brake pads, calipers, and rotors are separate.
Do I need to check brake clearance? Yes. Confirm the pads, shields and retaining hardware fit correctly and operate freely after installation.
Will these shields eliminate brake fade or fluid boiling? No. They can help reduce heat transfer but cannot replace proper fluid, pad selection, cooling or brake maintenance.