Bell
Bell M.8 Carbon Fiber Helmet SA2020
$1,159.95
Bell M.8 Carbon Fiber Helmet SA2020
The Bell M.8 Carbon Fiber SA2020 is designed with comfort in mind while keeping with traditional Bell M style. Its large eye port opening and adjustable forehead vents to reduce potential fogging are designed for the driver who wears sunglasses or eyeglasses.
The Bell M.8 Carbon Fiber SA2020 helmet is available in seven sizes, from XS to XL+, providing a near-custom fit with a wide spectrum of sizes. The helmet is certified for use with HANS devices with integrated M6 female threaded inserts for HANS post anchors, which are sold separately.
The Bell M.8 Carbon Fiber SA2020 helmet includes a clear face shield and black visor strip, shield hardware with a hex wrench, and a drawstring helmet bag to keep it all together.
The Bell M.8 Carbon Fiber is Snell SA2020 and FIA 8859-2015 approved.
Don't forget to pick up the Competition Motorsport Performance Racing Helmet Bag to keep your new Bell M.8 Carbon safe and sound throughout race weekends!
BELL M.8 CARBON FIBER AUTO RACING HELMET FEATURES
Snell SA2020 and FIA 8859-2015 homologated.
Carbon fiber shell is ultra-lightweight (Size M = 2.9 lbs./1.3 kg).
High-pressure molding system improves shell strength.
High-impact custom bead absorbing liner is multi-piece/multi-density for low- and high-velocity impact protection.
Integrated channels for optional drinking tube and radio microphone systems.
Black Comfort-Plus FR® interior fabric for excellent moisture wicking.
Exceptional fit with multi-density foam interior.
Best-in-class ventilation system includes direct-flow chin vents and manual level air intakes.
Hollow synthetic rubber gasket seal keeps out water, dust, and dirt.
Large eye port for eyeglass wearers.
Includes clear SRV-8 3mm SRV shield (SRV-1 pivot system). Additional Tinted shields also available Here.
M6 terminal hardware and hex wrench for Head and Neck Restraint anchors.
Available only in carbon fiber finish.
This helmet will ship with signature required for delivery.
Stilo
Stilo Venti WRC Composite Helmet FIA 8859 & SA2020
$1,150.00
Stilo Venti WRC Composite Helmet
Uncompromising Safety and Performance
The Stilo Venti WRC helmet line, including the Venti WRC Composite, is an update of Stilo's legendary WRC helmets worn by multiple rally racing champions. The Stilo Venti WRC Composite helmet features several improvements, most notably the innovative wireless (WL) communication system. An available wireless key allows the driver and co-driver to continue to communicate even when outside the race car.
The new Stilo Venti WRC Composite auto racing helmet features lightweight construction using the smallest of Stilo's helmet shells for the lightest, most compact helmet available. The Stilo Venti WRC Composite helmet is FIA 8859-2015 and SA2020 certified. With its unique ventilation system, the Stilo Venti WRC Composite helmet offers superior airflow, keeping you cool and focused during long races and under extreme conditions.
The interior padding of the Stilo Venti WRC Composite helmet can be easily removed and cleaned, ensuring a fresh and comfortable fit for every race. The Venti WRC Composite is equipped with innovative noise-canceling features and a redesigned mic boom with improved geometry for maximum sound quality and visibility.
The Stilo Venti WRC Composite helmet has an all-new aggressive design featuring an adjustable visor, allowing you to customize your field of view for different driving conditions (e.g., low sun). The Stilo Venti WRC Composite helmet is a professional helmet at the pinnacle of safety, performance, and value in motorsport.
Wireless Communication Innovations Only From Stilo
The microphone boom in the Stilo Venti WRC Composite has been reshaped to reject more cabin noise, improving communication clarity between driver and co-driver. The dynamic noise-canceling microphone is adjustable to allow for optimum spacing from the mouth, further reducing noise and improving clarity. The speakers in the Stilo Venti WRC Composite helmet sit in noise-attenuating ear muffs, greatly reducing external noise and improving comfort. The Stilo Venti WRC helmet's electronics are compatible with traditional wired amplifiers or the new wireless amplifiers.
The Stilo Venti WRC helmet is supplied with factory-fitted HANS post anchors as standard.
Stilo Venti WRC Composite Helmet Details:
Manufacturer: Stilo Helmets
Manufacturer part no.: AA0220BG2T
Homologation: FIA 8859-2015 and Snell SA2020
Shell material: Fiberglass Kevlar MSF(Multi-Sandwich Fiber)
Weight1: Small Shell ~3.3 lbs; Medium Shell ~3.4 lbs; Large Shell ~3.6 lbs.
Adjustable peak visor
HANS post anchors pre-installed
Also available with FIA 8860-2018 certification
How to Measure Your Head for a Properly-Fitting Racing Helmet
The most effective auto racing helmet is one that fits your head properly. Your helmet should fit snug all around your head without putting undue pressure on any point. It should not move around when you shake your head side-to-side or up-and-down. (If it does, imagine what it will do in a crash.)
To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
1 Weight may vary based on installed accessories.
Sparco
Sparco Sky RF-7W Carbon Fiber Helmet SA2020
$1,099.00
Sparco Sky RF-7W Carbon SA2020
The Sparco Sky RF-7W has a carbon fiber outer shell reinforced with layers of carbon-Kevlar. It includes a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase circulation to a redesigned interior. The interior has channels which not only cool the driver, but has additional channels which route air towards the visor, which reduces the chance of visor fogging. Sky RF-7W has removable, washable padding that can be repositioned for a comfortable fit. All interior seams have been removed from areas where greater pressure is exerted on the head.
The Sparco Sky RF-7W has been designed to accommodate a drink tube and an intercom system. Available in sizes XS to XL (including new M/L size using Sparco's smaller, lighter shell) with a red or black interior. Sky RF-7W has HANS posts pre-installed. SNELL 2020 and FIA 8859-2015 approved.
ADDITIONAL SPARCO SKY RF-7W HELMET SHIELDS AVAILABLE HERE
SPARCO SKY RF-7W CARBON FIBER HELMET FEATURES
Choose red or black interior color
Light weight carbon fiber with carbon-kevlar base layers
New "Medium/Large" size uses the lighter and more compact shell
HANSÂ posts pre-installed
Anodized aluminum chin strap hardware
Removable, washable lining
Wind tunnel optimized venting with anti-fog air channels
Pre-molded interior to accommodate drink tubes and an intercom system (sold separately).
SNELL SA2020 and FIA 8859-2015 approved
Â
Don't forget to check out the Competition Motorsport Performance Racing Helmet Bag, the perfect way to keep your new Sparco Sky RF-7W auto racing helmet safe and secure throughout each race weekend.
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
HJC
HJC H10 Carbon Fiber Helmet SA2020
$799.99
HJC H10 Carbon Fiber SA2020 Helmet
Â
The HJC H10 Carbon Fiber SA2020 helmet is the ideal helmet for all types of racing. From the your local track day to the starting line at SCCA Nationals, its comfortable fire-resistant, moisture-wicking Comfort-Carbon interior and Advanced Ventilation System keep you cool and comfortable. The HJC H10 Carbon is an affordable alternative to more expensive carbon fiber helmets without sacrificing fit, feel or safety.
HJC H10 CARBON FIBER AUTO RACING HELMET FEATURES
Snell SA2020 approved
HJC H10 carbon fiber Helmet weight (size L): 3.2 lbs (1.45 kg)
Carbon fiber composite weave shell is extremely light weight
Superior fit and comfort using advanced CAD technology
ACS (Advanced Channeling System) provides front-to-back airflow flushing heat and humidity up and out
Optional shields available: Amber, Dark Smoke, Dark Blue, and Black Chrome
Optional clear spoiler is available
Polycarbonate anti-fog shield with tear-off posts
Pre-installed M6 terminals for head and neck restraints
Improved front ventilation
Double D-ring retention system
HJC H10 CARBON FIBER AUTO RACING HELMET SIZES
Sizes XS-XXL
ADDITIONAL HJC H10 CARBON FIBER HELMET SHIELDS AVAILABLE HERE
Also, check out the Competition Motorsport Performance Racing Helmet Bag, the best way to keep your new HJC H10 Carbon safe and secure throughout each race weekend.
SIZE CHART
SIZE
CENTIMETER
HAT SIZE
INCHES
XS
54-55
6 3/4 – 6 7/8
21 1/4 – 21 5/8
S
56-57
7 – 7 1/8
22 – 22 1/2
M
58-59
7 1/4 – 7 3/8
22 7/8 – 23 1/4
L
60-61
7 1/2 – 7 5/8
23 5/8 – 24
XL
62-63
7 3/4 – 7 7/8
24 3/8 – 24 3/4
XXL
64-65
8 – 8 1/8
25 1/4 – 25 5/8
Â
