All

A1-302 Girodisc Lamborghini Huracán STO Front Iron Rotor Conversion These Girodisc A1-302 2-piece rotors directly replace the factory carbon-ceramic front rotors on the Lamborghini Huracán STO. They reuse the OEM calipers and require the D1130 pad shape (iron-rotor friction compound recommended). Replacement rings later: D1-302. Vehicle Fitment 2021+ Lamborghini Huracán STO (front, CCB-equipped) High-Carbon Rings, 72 Curved Vanes Proprietary high-carbon iron with 72 curved vanes acts as a centrifugal pump to pull cooling air through the disc. Floating hardware with spring preload controls thermal growth and keeps street noise low. Features Direct CCB-to-iron conversion; OEM calipers retained 2-piece floating design reduces unsprung/rotational mass Reusable 6061-T6 aluminum hats; new hardware included 72-vane internal geometry for strong airflow Manufactured and assembled in Bellingham, WA Sold/priced per pair A1-302 FAQs Which pads do I use? D1130 pad shape in an iron-rotor compound. Any coding or spacers? No coding or spacers required for STO; designed for OEM calipers. Minimum thickness? Replace front rings at 32 mm or sooner if a crack reaches the edge. Related Products D1-302 Girodisc Lamborghini Huracán STO Front Replacement Rings A2-302 Girodisc Lamborghini Huracán STO Rear Iron Rotor Conversion D2-302 Girodisc Lamborghini Huracán STO Rear Replacement Rings

Girodisc McLaren 390mm Rear Rotors These Girodisc 2-piece front rotors are a direct replacement for McLaren applications equipped with 390 mm front brakes. They reduce unsprung weight and improve cooling for repeatable performance on street and track. A1-206  Vehicle Fitment McLaren 600LT  McLaren 720S Lightweight, High-Performance Rotor Assemblies The rotor rings are machined from proprietary high-carbon iron to Girodisc specifications for durability and thermal stability. The 48 curved vanes act as a centrifugal pump, pulling air through the hub for excellent cooling under heavy braking. The serviceable two-piece design allows the aluminum hats to be reused with front replacement rings (D1-206). A1-206  Features Direct OEM replacement, no modifications required 2-piece floating rotor assemblies reduce unsprung weight High-carbon iron rings for consistent braking performance 48 curved vanes for efficient cooling Reusable 6061-T6 aluminum hats with black anodized finish Manufactured and assembled in Bellingham, WA Girodisc McLaren 390mm Front Rotors FAQs: Are these rotors a direct fit? Yes, they bolt on with factory calipers and hardware for 390 mm front brake applications. Do they work with OEM pads? Yes, and they are compatible with performance pad compounds. Can I reuse the hats when the rings wear out? Yes, use D1-206 front replacement rings. Are these suitable for track days? Yes, they are designed for repeated heat cycles with strong cooling. Related Products A1-206 Girodisc McLaren 390mm Front Rotors D2-206 Girodisc McLaren 390mm Rear Replacement Rings D1-206 Girodisc McLaren 390mm Front Replacement Rings

CMS Performance Bolt In Roll Bar For BMW E92 M3 This Roll Bar Fits the Following Cars (does not fit E90 or E93): BMW E92 M3 (2008-2013) BMW E92 M3 Competition Package ZCP (2011-2013) BMW E92 M3 GTS (2011) The Premium Roll Bar for BMW's Legendary E92 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the BMW E92 M3. It is engineered to easily bolt into any E92 variant, giving you rollover protection while adding to the motorsport-derived style of the E92 M3. Engineered with a premium put on safety and structural rigidity, the exceptional design of the CMS Performance E92 M3 Roll Bar integrates perfectly with the car's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength, energy dissipation, and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used by other roll bar manufacturers. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. A Roll Bar Design as Bulletproof as the M3 Itself Click Here for Installation Instructions CMS Performance designed the E92 roll bar with a one-piece main roll hoop featuring reinforced X-bracing along with a horizontal harness bar. (X-brace gussets can be added as an option add even more strength and rigidity.) The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0° to -20°) in most seating positions. Every CMS Performance E92 M3 roll bar bolts directly to the BMW's chassis, forming the rock-solid backbone of your roll-over and impact protection. Rearward kicker support angles are optimized for structural integrity and easy installation, while preserving your unobstructed rear view.  Cuting Edge Materials and Direct Bolt-In The CMS Performance BMW E92 M3 Roll Bar is designed to bolt directly to the M3 chassis' strong points without the need for any modification of existing interior trim or use of backing plates underneath the car. Full 360o TIG welding throughout gives every CMS Performance roll bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched BMW M3 factory colors1. We also offer technical color powder coat finishes like the amazing Superchrome! Or, go with satin black for a more understated appearance. CMS Performance has over 5,000 custom powder coat colors to give you a truly customized look. The Best Materials, Design and Construction Set CMS Performance Apart Our unwavering focus on using cutting-edge materials, unsurpassed design and construction, and premium fit&finish has taken CMS Performance Roll Bars to the top of the industry. The BMW E92 M3 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to your M3 whether on the street or at the track! BMW E92 M3 Roll Bar Options Main hoop X-brace gussets can be added for $200 CMS Roll Bar Harness Collars help keep your harness shoulder straps where you want them CMS Performance BMW E92 M3 Roll Bar Details Manufacturer: CMS Performance Manufacturer part no.: CPRB-E92 Material: 1.75″ X .090" Docol R8 Advanced High Strength Steel tubing Design: one-piece main hoop and three-piece kickers ease installation Hardware: American-made Grade 8 hardware included BMW E92 M3 Roll Bar Features CNC-cut mounting plates Designed, built, and finished by CMS Performance in the USA American-made CNC machined solid steel interlocking joints Allows full seat travel with virtually any seat Detailed installation instructions 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car. Installation requires removal of the factory rear seat bottom cushion. This product is intended for off-road race track use only.

Ferrari 458, 488 Challenge Front Iron Rotor Conversion The Girodisc front iron rotor conversion is the ultimate solution for Ferrari 458 and 488 Challenge drivers seeking to replace worn carbon-ceramic rotors without sacrificing braking performance. Designed as a direct replacement for the OE CCM discs, these rotors install seamlessly while maintaining the factory brake bias, ABS function, and pedal feel. To keep the rotor weight reasonable, a different brake pad with a 66mm annulus (pad swept area) or smaller is required. This common pad shape is shared with high-performance models like the Nissan GT-R, Cadillac CTS-V, and AMG Mercedes 6-piston calipers, making replacements easy to source for both street and track applications. Precision-Engineered Performance Vehicle Fitment Ferrari 458 Challenge Ferrari 488 Challenge Features Direct OE replacement: Installs without modifications, maintaining factory brake bias and performance balance. Lightweight and durable: Reduced annulus pad area keeps overall mass low for improved response and acceleration. Advanced cooling: Curved vane internal structure acts as a centrifugal pump to draw cooling air through the disc during hard braking. Floating mount design: Twelve alloy steel drive pins with anti-noise spring washers allow controlled expansion and quiet operation. U.S.-made quality: 6061-T6 aluminum hats and proprietary cast iron discs, poured and machined entirely in-house by Girodisc. FAQs Do I need special pads for these rotors? Yes. You’ll need a pad with a 66mm or smaller annulus, which is commonly available from multiple manufacturers. Are these a direct fit for my Challenge car? Yes, they’re a direct replacement for the OE CCM front discs on both the 458 and 488 Challenge. Do they retain factory brake feel? Absolutely. Girodisc rotors preserve OEM brake bias and provide a familiar pedal response with improved cooling and longevity. Are these sold individually? No. Girodisc iron rotor conversions are sold and priced per pair. Experience the precision of Girodisc on your Ferrari Challenge car with this iron rotor conversion—combining race-proven durability, improved thermal stability, and cost-effective serviceability for track and performance use.

BBS RI-S 2-Pc Forged Line Exclusive Wheels Call and talk to a Competition Motorsport custom wheel specialist at (844) 438-7244. We'll make sure you get the set of wheels you've always wanted at a price no one can beat. BBS RI-S Two-Piece Forged Line Exclusive Wheels are forged aluminum wheels designed and produced in the renowned BBS Motorsports Department. The RI-S two-piece wheels use titanium fasteners and the rims are machined using a BBS-patented process to reduce weight. They all come with a diamond-cut rim and clear protective top coat. All RI-S 2-Pc Forged Line Exclusive wheel weights are optimized using FEA (Finite Element Analysis). FEATURES Two-piece forged aluminum wheel. Titanium fasteners. Rim sections machined using a BBS patented process to reduce weight. Weight optimized by FEM analysis. WHEEL WEIGHTS 20x8.5: 24.5 lbs. 20x9.0: 26.0 lbs. 20x10.0: 26.0 lbs. While many popular fitments are stocked and ready to ship, some fitments are made to order, increasing lead times. Check with a Competition Motorsport wheels specialist at (844) 438-7244 for a complete quote and estimated lead time. "PFS" centerbore designation means the wheel comes with the BBS Precision Fitment System. Prices and weights are per wheel.

Girodisc Lamborghini Gallardo Super Trofeo Rear Rotors Take your Gallardo Super Trofeo’s braking performance to the next level with Girodisc’s precision-engineered 380mm rear rotors. These lightweight, two-piece rotors replace the factory 365mm units and include caliper spacers for a seamless fit. The result is improved cooling, sharper response, and reduced unsprung weight—essential upgrades for serious racers and track-day drivers. Racing-Grade Design for the Gallardo Super Trofeo Each Girodisc rotor features a CNC-machined 6061-T6 aluminum hat paired with Girodisc’s proprietary cast iron friction ring, both made in the USA. The curved vane design works as a centrifugal pump, forcing air through the disc to manage heat under extreme braking loads. The floating two-piece system allows thermal expansion without distortion, maintaining perfect pad contact and pedal feel lap after lap. Features • Direct replacement for OEM rear rotors – includes required caliper spacers• Increases rotor diameter from 365mm to 380mm for greater heat capacity• Lightweight 6061-T6 aluminum hats with anodized finish• Proprietary high-carbon cast iron rings cast and machined in the USA• Floating mount system with 12 cadmium-plated steel drive pins• Anti-noise spring washers eliminate rattle while maintaining proper float• Curved internal vanes maximize airflow for cooling• Approx. 24.5 lbs vs. 27 lbs for factory units – reduced rotational and unsprung weight• Fully rebuildable—replace only the rotor rings when worn• Sold/priced per pair Vehicle Fitment Lamborghini Gallardo Super Trofeo (All years)Includes caliper spacers for use with OEM Brembo calipers and factory hub assembly. Girodisc A2-168 Rear Rotor FAQs: Do these rotors fit directly onto the Super Trofeo without modification? Yes. They’re designed as a direct replacement for OEM rotors, and include the necessary caliper spacers to accommodate the larger 380mm size. Why upgrade from 365mm to 380mm? The larger rotor provides increased thermal capacity and greater mechanical leverage for improved braking performance under sustained track use. How much weight savings can I expect? Each Girodisc rotor is about 2.5 lbs lighter than the OEM unit, reducing both unsprung and rotational mass for better handling and acceleration. Are these suitable for endurance racing? Yes. Girodisc rotors are proven in long-duration competition, offering excellent temperature stability and resistance to warping over repeated heat cycles. Experience the precision, reliability, and stopping confidence your Gallardo Super Trofeo deserves with Girodisc’s 380mm rear rotor upgrade—purpose-built for the demands of serious track performance.

Lamborghini Gallardo Super Trofeo Front Rotors (Girodisc A1-168) The Girodisc Front Rotor set for the Lamborghini Gallardo Super Trofeo delivers world-class braking performance for one of the most demanding race platforms. Designed as a direct replacement for the original equipment rotors, these two-piece rotors significantly reduce unsprung and rotating mass while improving cooling and braking consistency under extreme heat. Vehicle Fitment Girodisc A1-168 This Girodisc front rotor set fits the following Lamborghini models: Lamborghini Gallardo LP560 Super Trofeo Lamborghini Gallardo LP570-4 Super Trofeo May also fit other Gallardo race variants using the OEM Super Trofeo front brake system These rotors install directly with the factory calipers and hardware—no modifications required. Performance and Design By replacing the heavy factory rotors with lightweight Girodisc two-piece units, drivers experience improved suspension response, reduced brake fade, and enhanced pedal consistency. The aluminum hat is CNC-machined from U.S.-sourced 6061-T6 aircraft-grade material, while the friction rings are made from Girodisc’s proprietary cast iron for maximum strength and heat stability. The internal curved vane design acts as a centrifugal pump, pulling air through the disc for superior cooling efficiency under sustained track use. Features - Direct replacement for OEM Super Trofeo front rotors; no modifications required. - Two-piece floating rotor assembly reduces unsprung and rotating weight. - 6061-T6 aluminum hat paired with proprietary cast iron rings for optimal rigidity and heat management. - Curved vane design ensures efficient airflow and cooling during high-performance driving. - Floating mount system with 12 high-strength alloy steel drive pins allows controlled axial and radial float. - Anti-noise spring washers eliminate rattle and vibration during street or pit operations while allowing thermal expansion. - Cadmium-plated hardware and class 12.9 fasteners provide long-term corrosion resistance. - Designed, cast, and machined entirely in the USA to Girodisc’s motorsport-grade tolerances. Specifications Rotor Type: Two-piece floatingMaterial: Proprietary cast iron with 6061-T6 aluminum hatHardware: 12 high-strength alloy steel drive pins with spring washersFitment: Lamborghini Gallardo Super Trofeo front axleInstallation: Direct bolt-on to factory calipersSold as: Pair (left and right front rotors) FAQs: Lamborghini Gallardo Super Trofeo Front Rotors (Girodisc) Are these rotors compatible with the OEM Super Trofeo calipers? Yes. They are a direct bolt-on fit designed specifically for the Gallardo Super Trofeo braking system. What advantages do these rotors offer over OEM? They deliver reduced weight, improved cooling capacity, faster suspension response, and better braking consistency over long sessions. Will they produce noise or rattle? No. The use of anti-noise spring washers allows the discs to expand freely under heat without producing unwanted vibration or rattle. Can the rotors be serviced? Yes. When the iron friction rings wear out, they can be replaced independently while retaining the original aluminum hats and hardware. Ordering Information Sold and priced per pair. Includes left and right Girodisc front rotors for the Lamborghini Gallardo Super Trofeo.

Ferrari F430 Front Iron Rotor Conversion Upgrade your Ferrari F430 with Girodisc’s Front Iron Rotor Conversion — a direct bolt-on replacement for the OEM carbon-ceramic rotors. This setup maintains your factory brake balance, ABS tuning, and pedal feel while improving heat control and reducing long-term maintenance costs. Designed for both street and track use, these rotors provide consistent performance without the fragility or expense of CCM components. To optimize performance and control weight, these rotors require brake pads with an annulus (swept area) of 66mm or less. Girodisc recommends the same pad shapes used on popular performance platforms such as the Nissan GT-R, Cadillac CTS-V, and AMG Mercedes with six-piston calipers. This makes sourcing replacement pads simple and affordable while maintaining exceptional braking response. Precision-Engineered Performance Vehicle Fitment Ferrari F430 (all models with OEM CCM rotors) Girodisc A1-133 Features Direct CCM-to-iron conversion: Replaces factory carbon-ceramic rotors with durable, serviceable iron components. Curved vane cooling: Directional vanes act as centrifugal pumps, forcing air through the rotor for maximum heat dissipation and reduced fade. Floating mount design: Twelve high-strength steel pins allow the iron rotor to expand under heat while eliminating rattle through anti-noise spring washers. U.S.-built precision: 6061-T6 aluminum hats and proprietary cast-iron rings are machined in-house by Girodisc using domestic materials. Serviceable two-piece system: Replace only the iron rings when worn, keeping your aluminum hats in service for years. Girodisc A1-133 FAQs Do these replace the OEM carbon-ceramic rotors? Yes, they are a direct conversion to a more durable and affordable iron rotor setup. Will they change brake bias? No. Girodisc rotors are engineered to maintain factory bias and ABS calibration. What brake pads do they use? Pads with a swept area of 66mm or less—FMSI 1405 shape is compatible and widely available. Are they quieter than CCM rotors? Yes, the anti-noise washers prevent rattle and ensure quiet operation in daily driving. How are they sold? Sold and priced per pair. Experience improved braking performance and simplified maintenance with Girodisc’s Iron Rotor Conversion for the Ferrari F430—precision-engineered, U.S.-made, and track-proven for supercar performance you can rely on.

Girodisc McLaren 390mm Front Rotors These Girodisc 2-piece front rotors are a direct replacement for McLaren applications equipped with 390 mm front brakes. They reduce unsprung weight and improve cooling for repeatable performance on street and track. A1-206  Vehicle Fitment McLaren 600LT  McLaren 720S Lightweight, High-Performance Rotor Assemblies The rotor rings are machined from proprietary high-carbon iron to Girodisc specifications for durability and thermal stability. The 48 curved vanes act as a centrifugal pump, pulling air through the hub for excellent cooling under heavy braking. The serviceable two-piece design allows the aluminum hats to be reused with front replacement rings (D1-206). A1-206  Features Direct OEM replacement, no modifications required 2-piece floating rotor assemblies reduce unsprung weight High-carbon iron rings for consistent braking performance 48 curved vanes for efficient cooling Reusable 6061-T6 aluminum hats with black anodized finish Manufactured and assembled in Bellingham, WA Girodisc McLaren 390mm Front Rotors FAQs: Are these rotors a direct fit? Yes, they bolt on with factory calipers and hardware for 390 mm front brake applications. Do they work with OEM pads? Yes, and they are compatible with performance pad compounds. Can I reuse the hats when the rings wear out? Yes, use D1-206 front replacement rings. Are these suitable for track days? Yes, they are designed for repeated heat cycles with strong cooling. Related Products A2-206 Girodisc McLaren 390mm Rear Rotors D2-206 Girodisc McLaren 390mm Rear Replacement Rings D1-206 Girodisc McLaren 390mm Front Replacement Rings

McLaren Front Rotors (Girodisc A1-159) The Girodisc 394mm Front Rotor Conversion for McLaren models provides a lightweight, high-performance alternative to the OEM carbon-ceramic rotors. Designed as a direct bolt-on replacement, these two-piece iron rotors retain full compatibility with the factory calipers while improving heat management, serviceability, and overall braking performance. By switching to iron rotors, drivers benefit from enhanced thermal durability and reduced maintenance costs without compromising braking balance or ABS functionality. Vehicle Fitment This Girodisc 394mm front rotor set fits the following McLaren models equipped with OEM carbon-ceramic front rotors: McLaren 540C McLaren 570S / 570GT McLaren 600LT McLaren 650S McLaren 675LT McLaren MP4-12C McLaren 720S (with 394mm front rotors) Direct fit for factory six-piston front calipers. No modifications required. Pad Compatibility To optimize performance and reduce unnecessary weight, these rotors are designed for pads with an annulus (swept area) of 66mm or less. The correct pad shape is the common FMSI D1405, also used on vehicles such as the Nissan GT-R, Cadillac CTS-V, and many AMG Mercedes models with six-piston calipers. Girodisc offers several pad compounds in this shape; contact us for recommendations. Performance and Design The rotor assembly combines a 6061-T6 aircraft-grade aluminum hat with a proprietary cast iron friction ring machined entirely in-house at Girodisc. The curved vane design acts as a centrifugal pump, pulling air through the disc to improve cooling efficiency under sustained high temperatures. The result is consistent braking performance, reduced fade, and improved pedal feel in both track and street conditions. Features - Direct replacement for OEM 394mm carbon-ceramic rotors; no modifications required. - Two-piece floating design reduces unsprung and rotating mass for sharper response. - 6061-T6 aluminum hat mated to a proprietary cast iron rotor ring for strength and thermal control. - Curved vane internal design promotes efficient airflow and heat dissipation. - Floating mount system with 12 high-strength alloy steel drive pins for controlled axial and radial float. - Anti-noise spring washers eliminate rattle during street use while maintaining float under race conditions. - Cadmium-plated hardware ensures corrosion resistance and longevity. - Fully machined and assembled in the USA to Girodisc motorsport-grade specifications. Specifications Rotor Diameter: 394mmRotor Type: Two-piece floatingPad Shape: FMSI D1405 (≤66mm annulus)Material: Proprietary cast iron with 6061-T6 aluminum hatHardware: 12 alloy steel drive pins with anti-noise spring washersFitment: McLaren models with 394mm OEM carbon-ceramic rotorsSold as: Pair (left and right front rotors) FAQs: McLaren 394mm Front Rotors (Girodisc) Why do I need to change the pad shape? To maintain optimal weight and heat capacity, the Girodisc rotors use a smaller 66mm swept area. The FMSI D1405 pad shape provides the correct fit and performance balance. Can I reuse my OEM pads? No. The OEM pads are designed for the full annulus of the carbon-ceramic rotors and are too large for this conversion. Are these rotors noisy? No. Anti-noise spring washers prevent rattle during normal driving while allowing full float under heat. What are the main benefits over OEM carbon-ceramic rotors? Improved serviceability, enhanced thermal consistency, and a major cost reduction for replacement and maintenance. Can the rotors be serviced? Yes. When the cast iron rings wear out, they can be replaced individually, allowing the aluminum hats and hardware to be reused. Ordering Information Sold and priced per pair. Includes left and right Girodisc 394mm front iron rotors for McLaren models equipped with OEM carbon-ceramic brakes. Requires FMSI D1405 pad shape for installation.

Lamborghini Aventador Front Rotors The Girodisc two-piece floating front rotor upgrade is a precision-engineered replacement for the factory discs on all Lamborghini Aventador models. Designed for direct fitment with no modifications required, these rotors bolt straight to the OEM calipers, maintaining factory brake balance and ABS functionality while delivering massive gains in thermal efficiency, cooling, and durability. By replacing the stock one-piece rotors with Girodisc’s lightweight two-piece design, you’ll shed unsprung weight for sharper steering feedback and faster suspension response. Each rotor features a 6061-T6 aluminum hat paired with Girodisc’s proprietary cast-iron rotor rings—poured, machined, and finished entirely in the USA. The directional curved vane system acts as a centrifugal pump, pulling cool air through the disc to minimize fade and ensure consistent braking performance during high-speed track sessions or aggressive canyon runs. Precision-Built Performance Vehicle Fitment Lamborghini Aventador LP700-4 Lamborghini Aventador S / SV / SVJ Girodisc A1-119 Features Direct OEM replacement: Bolts directly to stock calipers with no adapters or modifications. Curved vane internal design: Actively pumps cooling air through the disc for exceptional heat management. Floating mount hardware: Uses cadmium-plated steel drive pins and anti-noise washers to allow thermal expansion without rattle. Lightweight construction: Reduces unsprung and rotational mass for better handling and response. Serviceable two-piece system: Replace only the cast-iron rings when worn—reuse the aluminum hats for long-term savings. Made in the USA: 100% designed, cast, and machined domestically for ultimate precision and quality control. Girodisc A1-119 FAQs Will these fit the stock Aventador calipers? Yes. The Girodisc rotors are a direct bolt-on replacement that works perfectly with OEM calipers. Do these rotors reduce weight? Absolutely. The two-piece design sheds unsprung weight compared to the factory setup, improving handling and acceleration. Are these rotors suitable for track use? Yes. The curved vane design and floating mount system are proven under extreme track temperatures. Do they affect brake balance or ABS? No. Girodisc rotors retain factory bias and full ABS functionality. How are they sold? Sold and priced per pair. Upgrade your Lamborghini Aventador’s braking performance with Girodisc front rotors—precision-crafted, race-proven, and engineered to outperform the factory setup both on the street and the circuit.