All

Sparco Air & Sky Replacement Shields The Sparco visor shields for the Air Pro and Sky helmets are constructed from strong, lightweight polycarbonate which provide distortion-free vision. The shields are available in dark smoke, silver iridium and blue iridium which enhance your vision during bright sunlight conditions. Clear replacement shields are also available. These Sparco visor shields will fit the Sparco Prime RF-9W, Sky RF-7W and Air Pro RF-5w full face helmets. Note: the Iridium Red and Yellow shields are not FIA approved.

Stilo ST6 Helmet Owner's Kit The Perfect Accessories For Your Stilo ST6 Helmet This kit has everything you need to get the most out of your Stilo ST6 helmet, including a premium Stilo Race Gear Bag to keep your helmet, HANS device, and other racing accessories safe and secure. Add in Molecule Refresher racing garment care and you'll ensure your helmet (and the rest of your gear) stays clean, fresh, and lasts for years. What Makes Up the Stilo ST6 Helmet Owner's Kit? Stilo YY0070 Race Gear Bag fits your Stilo ST6 helmet, head-and-neck restraint, and essential track accessories. Molecule Refresher 16 oz. spray gets the funk out and keeps your helmet (and the rest of your gear) looking & smelling fresh.

SS-0732 GiroDisc Street/Strip Pads for C5, C6 Corvette Rear Dual-Purpose Street and Strip Brake Pad Performance GiroDisc Street/Strip Pads are dual-purpose semi-metallic brake pads for drivers who need a more performance-minded option than a basic street pad. They are listed for specific caliper, vehicle, or pad-shape applications depending on the SKU. The SS-0732 listing is configured for C5, C6 Corvette Rear. Use the SKU, axle position, caliper reference, and application wording together when confirming the correct brake pad option for your vehicle or brake setup. Brake Pad Application Street/Strip Pads for C5, C6 Corvette Rear Street/Strip Brake Pad Features Dual-purpose street and performance-oriented pad option Semi-metallic brake pad construction Application-specific fitment by SKU A useful choice for drivers seeking stronger braking confidence Fitment Notes Brake pad fitment can depend on the caliper, conversion kit, rotor package, or exact pad-shape requirement. Review the application wording carefully and confirm compatibility before ordering, especially for race compounds and iron-conversion applications. SS-0732 GiroDisc Street/Strip Pads for C5, C6 Corvette Rear FAQs What are GiroDisc Street/Strip Pads intended for?They are positioned as a more performance-minded option for drivers who want stronger braking capability than a conventional street-only pad. Is SS-0732 the correct pad listing for C5, C6 Corvette Rear?This listing is specifically labeled for C5, C6 Corvette Rear. Confirm the vehicle, caliper, rotor conversion, or pad-shape requirement before ordering. Why does this brake pad listing use the SKU SS-0732?The SKU identifies the exact GiroDisc or Raybestos pad application listed here, which helps match the correct compound and shape to the braking setup. Should I confirm fitment before purchase?Yes. Brake pad selection can vary by caliper, rotor conversion, pad shape, and axle position, so verify the application details against your setup before ordering. Choose the brake pad compound and application that best matches your car, braking system, and intended use.

Racing Radios HD Thru-Hole Push-To-Talk PTT Racing Radios screw mount thru-hole PTT switch. Custom-made by the production team at Racing Radios, these push-to-talk switches are used by the top race teams around the world.  This screw mount switch provides a secure mount and reliable connection. Includes a rubber boot for protection. Racing Radios Thru-Hole PTT Switch Details Manufacturer: Racing Radios Manufacturer part no.: RPT-30 Industry standard 3-pin connection Fits in 9/16" hole

Racing Radio Foam Ear Buds European RCA Male Plug For the purpose of hygiene and safety, this item is not eligible for return. Foam driver earpieces for European RCA-style helmet connections. In the USA we use a male 3.5mm TRS connector to connect to our earbud jack, but in many European series the wiring protocol is based on the RCA-style connection. Racing Radios RR-CE31-A/FOAMS-RCA has a 19-inch (48 cm) wiring lead and industry-standard foam earpieces used by Racing Radios for over 30 years. Racing Radio Foam Ear Buds Details Manufacturer: Racing Radios Manufacturer part number: CE31/A-FOAMS-RCA Helmet connection: European RCA Male Foam Tipped: Yes Wiring Length: 19" Entry level or Pro: European Pro This is a very special item only used in European racing series and will not work with most US radio components.  If we look closer at a Racing Radios earpiece, we notice there are quite a few differences. First, the outer foam piece is softer and closer to a smooth/soft material than the harder foam material used by lesser manufacturers. After a year of racing the foam was still soft, but starting to look pretty nasty, so upon trying to remove the foam I noticed that there is a micro drop of glue on the end of the wire to transducer that locked it to the foam earpiece. To remove the foam, I used a new razor blade and cut the foam like a banana and peeled the old foam out of the way. There I could inspect the perfect micro soldering on what is one of the words smallest (transducers) speaker not used for Top Secret surveillance. To install the new foam covers, I use a pair of tweezers to stretch the hole open for 30 seconds and before the hole closes I slide the mini-transducer into the new foam, keeping the end of the sound tube barely covered by the end of the foam. I put a 1/2 a drop of super glue on the wire to foam area and I am done.  Racing Radios is considered the go to for professional race teams of all series and their quality is second to none. Racing Radios foam earpieces are not the cheapest on the web, but they are the best on the web. Trust Racing Radios for the best in race car driver communication.

AiM Sports Track Day Suction Mount The AiM Track Day Mount serves as an all-in-one solution for securely attaching both your AiM SmartyCam3 Sport or SmartyCam3 Corsa and Solo2 DL to your windshield.1 It is uniquely designed so your SmartyCam3 is securely mounted facing out the windshield and your Solo2 DL is facing you. The Track Day Mount is compact, straightforward to use, and consolidates your equipment neatly, eliminating the need for two separate mounts and minimizing cable clutter. The powerful suction cup provides a secure hold on any smooth, clean surface. The robust suction cup ensures a secure grip on any smooth, clean surface. With a custom-designed contoured arm and ball mounts, the AiM SmartyCam3 faces forward, capturing the view through the windshield, while the AiM Solo2 DL faces the driver. This specialized suction-cup mount from AiM is an ideal choice for track days! Add the Trackday Kit Short Cable to your order using the dropdown above and connect your Solo2 DL and SmartyCam3 with the absolute minimum of cable clutter! 1 AiM Solo2 DL and SmartyCam3 (pictured) each sold separately.

Chillout Systems Rapid Release Shirt Handle The Rapid Release dry break system, makes driver changes fast and effortless. No fumbling with tubes or connectors while under pressure. Just a quick press, and coolant/water starts flowing instantly. In an emergency, the connectors release when a force greater than 10 lbs is applied. Features Effortless dry break system Emergency release feature  Included Items 2 x 1/4" barbed quick-release fittings 1 x driver-side handle 2 x 36" reinforced, non-kinking extensions 2 x 1/4th to 5/16th barrel connectors 2 x 1/4th to 1/4th barrel connectors 2 x 36" reinforced cooling tubes

Antigravity SC-10 Super-Charger The Antigravity SC-10 Super-Charger is the high-output 10-Amp charging solution that keeps every vehicle battery in your garage ready for action. Whether you’re maintaining a race car between track days, waking up a lithium battery with BMS protection, or topping off the truck before a weekend haul, this Super-Charger handles it all with speed, safety, and intelligence. No guesswork, no clunky old chargers—just modern charging performance in one compact package. Next-generation charging for every battery AntiGravity SC-10 Features Large LCD display: real-time readouts for voltage, current, state of charge, and function icons. No vague LED lights—just clear, accurate information. Easy two-button operation: select battery type or special function in seconds. Charger remembers your last setting after power loss. Voltage test mode: instantly check battery health without a separate multimeter. Multi-use versatility: cars, trucks, motorcycles, ATVs, UTVs, RVs, boats, tractors, and more. Multi-chemistry support: compatible with Lithium (LiFePO4/LFP) and Lead/Acid (AGM, STD, GEL, WET, VRLA). Multi-voltage charging: works with 6v and 12v lithium plus 12v lead/acid batteries. BMS Re-Set: wakes lithium batteries that have gone into protection mode. Power supply mode: delivers up to 10A at 12–14V to maintain vehicle electronics during battery swaps or power small 12V devices. Recondition mode: helps restore performance in damaged or sulfated lead/acid batteries. Maintenance charging: safe low-amp mode for smaller lead/acid batteries such as lawn tractors. Automatic Winter Mode: snowflake icon shows when charging adapts for cold weather. Complete protection suite: safeguards against short-circuit, overload, low/high voltage, over-charge, over-discharge, over-temp, and reverse connection. Specifications Input Voltage 110–120V AC ~ 50–60 Hz (US plug) Output Voltage 6V / 12V DC Max Output Current @ 6V 2A Max Output Current @ 12V STD/AGM/LFP 10A Battery Capacity Range 3Ah – 200Ah Recondition Mode 16.5V DC / 2.5A (lead/acid only) Operating Temperature -4°F to 104°F (-20°C to 40°C) Protection Class Class II, IP65 Dimensions 9.4" × 4.4" × 2.5" Warranty 3 years UPC 711811704918 SKU AG-BC-SC-10 FAQs: Antigravity SC-10 Super-Charger What does the LCD screen show? It displays voltage, amps, charge level (20–100%), battery type (STD, AGM, LFP), and function icons like BMS reset, voltage test, power supply, and winter mode. Is it easy to use for someone not technical? Yes. With only two buttons, it’s simple to set up. Just pick your battery type, select a function if needed, and connect the clamps. The charger does the rest automatically. Can I use the power supply mode for ECU tuning? No. The SC-10 delivers up to 10A at 12–14V, which is perfect for swaps and small 12V devices, but not high-current ECU tuning that requires specialized equipment. Will it recover an old battery? The Recondition function can help revive lead/acid batteries damaged by sulfation or undercharging. Results vary depending on battery condition, but it gives you a chance to restore performance before replacing. Keep every vehicle ready to fire up with the Antigravity SC-10 Super-Charger. Order today and enjoy a modern, versatile charging system built for performance and reliability.

Racetech RTB2115B Seat Back Bracket The Racetech RTB2115B bracket for back-mounting seats is made from 5mm 5083 aluminum alloy. This bracket bolts to the rear shoulder section of Racetech 119-Series racing seats and works in conjunction with Racetech RTB2005C clamps. This allows you to brace your racing seat to a lateral or diagonal roll cage or roll bar tube. Four holes must be drilled into the RTB2115B bracket to accept the Racetech clamps once you have your racing seat set-up in the optimum driving position. For more info, take a look at these racing seat back-mounting instructions. Racetech RTB2115B Is Compatible With These Racetech Seats: RT4119HRW RT4119THR RT4119WHR RT4119WTHR RT9119HR RT9119THR RT9119WHR RT9119WTHR

CMS Performance Racing Seat Side Mounts CMS Performance Racing Seat Side Mounts provide a strong, the most highly adjustable solution for mounting compatible side-mount racing seats while also incorporating dedicated mounting points for your racing harness lap belts.  No other side mount allows for more adjustments than any other side mounts on the market Available in both Short and Tall versions, these mounts give drivers and builders the ultimate flexibility to fine-tune seat height, rake, and overall driving position while simplifying the installation of the lap portion of a multi-point racing harness. Integrated Racing Harness Lap Belt Mounting Points Unlike basic racing seat side brackets, the CMS Performance Side Mounts incorporate dedicated attachment points for the left and right lap belts of a compatible racing harness. This helps create a cleaner, more integrated seat and harness installation without requiring separate universal lap belt brackets. The lap belt mounting locations are built directly into the seat mounting system, keeping the attachment points close to the seat and helping provide proper harness routing across the driver's pelvis. Choose Short or Tall Side Mounts Short Side Mounts: The Short version features a compact profile for installations where less vertical mounting range is required. It is an excellent choice for lower seating positions and tighter cockpit installations. Tall Side Mounts: The Tall version provides additional vertical adjustment range, giving you more flexibility when setting seat height, seat rake, and overall driver position. CMS Performance Racing Seat Side Mount Features Available in Short and Tall versions Designed for compatible side-mount racing seats Integrated left and right racing harness lap belt mounting points Eliminates the need for separate universal lap belt mounting brackets in compatible installations Multiple seat mounting slots and adjustment positions Allows adjustment of racing seat height and rake Helps fine-tune driver seating position Strong, rigid construction for secure seat mounting Black finish for a clean motorsport appearance Ideal for track, race, and performance vehicle builds Dial In Your Racing Seat Position A properly positioned racing seat is critical for driver control, comfort, and harness fit. The CMS Performance Side Mounts provide numerous mounting positions to help position the seat correctly in relation to the steering wheel, pedals, roll bar or cage, helmet clearance, and harness system. The multiple horizontal and vertical mounting locations allow you to achieve a more customized seating position instead of being limited to only a few fixed mounting points. Short Side Mounts The CMS Performance Short Side Mounts are ideal when a compact mounting profile is preferred. They provide substantial adjustment for many racing seat installations while keeping the overall bracket height low. Compact side-mount profile Ideal for lower seating positions Great for tighter cockpit installations Multiple adjustment positions for seat rake and height Integrated racing harness lap belt mounting points Tall Side Mounts The CMS Performance Tall Side Mounts provide increased vertical mounting range for installations requiring additional height or a greater range of seat-angle adjustment. Taller side-mount profile Increased vertical adjustment range Greater flexibility when setting seat rake Ideal for custom seating positions requiring additional height Integrated racing harness lap belt mounting points Designed for Side-Mount Racing Seats These brackets are intended for compatible fixed-back racing seats that use side mounting points. They can be incorporated into a complete racing seat and harness installation using the appropriate vehicle-specific floor mount, seat base, or slider system. Always verify racing seat, harness, seat base, and mounting hardware compatibility before installation. Product Details Manufacturer: CMS Performance Product Type: Racing Seat Side Mounts Available Versions: Short or Tall Application: Compatible side-mount racing seats Harness Mounting: Integrated lap belt mounting points Adjustment: Multiple seat height, rake, and positioning options Finish: Black Use: Track, race, and performance vehicle applications Questions About CMS Performance Racing Seat Side Mounts Do these side mounts include racing harness lap belt mounting points?Yes. The CMS Performance Side Mounts incorporate dedicated mounting points for the left and right lap belts of a compatible racing harness. What is the difference between the Short and Tall versions?The Short version has a more compact profile for lower seating positions. The Tall version provides additional vertical adjustment range for installations requiring greater seat height or rake adjustment. Can I adjust the angle of my racing seat?Yes. The multiple mounting positions allow you to fine-tune both seat height and rake depending on your seat and installation. Will these fit every racing seat?They are designed for compatible side-mount racing seats. Always verify your specific racing seat's side-mount hole pattern before ordering. Do I still need shoulder and sub-strap mounting points?Yes. These side mounts provide lap belt mounting points. The shoulder belts and anti-submarine straps of a multi-point harness require their own appropriate mounting locations.

Antigravity SAE MagCode Charging Pigtail, Model FL (Lithium Ferraris) Safe Charging for Ferrari Factory Lithium Batteries The Antigravity SAE MagCode Charging Pigtail, Model FL is designed exclusively for Ferraris equipped with the factory Ferrari lithium battery. This specialized harness lets you safely connect Antigravity Super-Chargers—or any compatible 12V SAE lithium charger—to your Ferrari’s OEM MagCode charging port without modifying the vehicle. Factory lithium-equipped Ferraris require the correct wiring to avoid damaging sensitive electronics. The Model FL pigtail delivers a secure, plug-and-play solution specifically for these applications, ensuring safe and effective charging every time. Key Features & Benefits MagCode to SAE Adapter: Enables Antigravity Super-Chargers to connect to factory lithium Ferraris. Purpose-Built for Lithium Systems: Correct wiring for Ferrari lithium battery charging circuits. Exclusive Compatibility: For Pista, F8 Tributo, and 812 Competizione models only. 16-Inch Harness: Compact length with included dust cap for clean installation. Safe Charging: Supports chargers up to 10 amps (12V lithium chargers only). Universal SAE End: Works with most 12V lithium-compatible chargers using SAE connectors. High-Quality Construction: Durable wiring and sealed connectors for long-term reliability. Plug-and-Play: No splicing, no hardwiring—preserves your Ferrari’s OEM harness integrity. Vehicle Compatibility Ferrari Models with Factory Lithium Batteries: 488 Pista 488 Pista Spider F8 Tributo 812 Competizione ⚠️ Important: Do not use this harness on Ferraris originally equipped with AGM/lead-acid batteries. Those models require the Antigravity “Model F” MagCode pigtail (different wiring). Use only chargers designed specifically for 12V LiFePO4 (LFP) batteries. Avoid lead/acid chargers with desulfation mode. Specifications Product Type SAE to MagCode charging pigtail Model FL (Factory Ferrari Lithium) Length 16 inches Max Charger Output 10 amps Connector Type Standard SAE to MagCode Dust Cap Included Compatibility 12V lithium-compatible SAE chargers UPC 711811705045 SKU AG-SAE-MC-FL Included in the Box SAE MagCode Charging Pigtail (Model FL) Dust cap Product information sheet Why Choose the Model FL? High-end vehicles with factory lithium systems demand precision—and the Antigravity SAE MagCode Charging Pigtail, Model FL is built to meet that need. Specifically wired for Ferrari lithium-equipped models, this harness ensures your charger communicates safely with your car’s advanced electrical system, preventing damage from incorrect polarity or desulfation pulses. It’s the safest and simplest way to keep your Ferrari’s lithium battery fully charged and ready to perform.

The Ultimate Helmet & Gear Hauler Your Race Gear Deserves VIP Treatment You wouldn't trust a budget mechanic with your race car, so why put your premium Stilo helmet and racing gear into a beat-up duffel bag? The Stilo Race Gear Bag is designed to transport your helmet, FHR (frontal head restraint), and essential track-day accessories in total style and security. This bag isn’t just a carrying case—it’s a mobile pit crew for your gear. With input from pro drivers and passionate weekend warriors alike, Stilo engineered this bag to make your track life easier and more organized. Stilo Race Gear Bag Key Features Spacious, Yet Compact – Perfectly sized to hold your Stilo helmet and HANS/FHR device with room to spare for gloves, visors, and small essentials. Easy-Access Dual Zipper System – Load and unload your gear in seconds with the oversized, smooth-gliding zippers. Front Storage Pocket – Keep your race-day notes, track maps, or even a snack (because let’s be honest, track days get long) within easy reach. Premium Protection – Padded interior to shield your gear from impacts, bumps, and overenthusiastic pit crew members. Sleek, Stilo Styling – Designed with the same attention to detail as their industry-leading helmets—because your gear should look as good as you do on race day. Why Settle for Less? A scratched helmet or a misplaced visor can ruin your entire track day. The Stilo Race Gear Bag ensures that every piece of your race kit stays protected, organized, and ready for action. Whether you're heading to a casual track day or prepping for competition, this bag is an essential part of your racing arsenal. Stilo Race Gear Bag FAQs Will this bag fit helmets from other brands?Absolutely! While designed with Stilo helmets in mind, most full-face racing helmets will fit snugly inside. Can I store additional items in the bag?Yes! There’s extra space for gloves, visors, and other small gear, plus a front pocket for documents or race-day essentials. Is the bag water-resistant?It offers light water resistance, but we wouldn’t recommend testing it in a downpour. Keep it trackside, not poolside. Does it have a shoulder strap?Nope, but the sturdy carry handle ensures a comfortable grip even when fully loaded. Get Yours Today Stop stuffing your expensive helmet into an old gym bag. Upgrade your race day experience with the Stilo Race Gear Bag 2024 and keep your gear protected, organized, and looking pro. Order now and take the first step towards a smoother, more stylish track day! Stilo Race Gear Bag SKU: YY0070

Alpinestars Flow v3 Drying Helmet Bag Attention all race track aficionados and tarmac adventurers! Introducing the Alpinestars Flow V3 Helmet Bag - not just any pit stop for your headgear, but a luxury penthouse suite! This isn't just a bag; it's the VIP treatment your helmet deserves after a day of white-knuckled, pedal-to-the-metal action. Constructed from a lightweight and durable polyester shell, the Flow V3 isn't just another pretty face in the pit lane. It's tough enough to handle the rigors of travel without weighing you down – because we know the last thing you need is extra baggage on race day. Designed with your full-face helmet and HANS device in mind, it cradles your gear like a newborn, but with the muscle of a pit lane pro. The plush fleece lining is so soft, your helmet might just get a little too comfortable. But hey, even your head's champion deserves a cozy spot, right? Drying Makes A World Of Difference Now, let's talk about the built-in USB powered helmet dryer and mesh inserts. These features are like having a personal pit crew for your helmet, working overtime to wick away moisture and keep your helmet as fresh as your reflexes on the start line. Because nothing says "ready to rumble" like a crisp, dry helmet. Don't even get us started on the rubberized bottom base. It’s as rigid and reliable as your determination to nail the apex on every turn. It ensures your helmet’s safe and sound, no matter if you're on gravel or grass. Space To Spare Spacious side compartment is an understatement. You could fit your gloves, glasses, and probably a sandwich in there (because who races on an empty stomach?). The fleece inner lining in this pocket is like adding a silk robe to your helmet's wardrobe, extra protection for those extra special accessories. Transportation is a breeze with double grab handles and a removable shoulder strap that makes carrying it as effortless as cruising down the straightaway. With a parallel zip opening, you'll have your gear in and out faster than a pit stop at Monza. Alpinestars Flow v3 Drying Helmet Bag Details Manufacturer: Alpinestars Manufacturer part no.: SKU 6150224-12-O/S Lightweight and durable polyester shell Full-face helmet and HANS device accommodation Built-in helmet dryer and mesh inserts for moisture wicking Internal USB in the main compartment Rigid, rubberized base for secure placement Spacious side compartment for accessories Plush fleece lining for protection Double grab handles and removable shoulder strap for easy transportation Quick access with parallel zip opening Fasten Your Seatbelt! Don’t let your helmet sit slumped in some mundane bag. Give it the luxury pit stop it deserves with the Alpinestars Flow V3 Helmet Bag. Click that button, seal the deal, and keep your headgear as pampered and prepared as you are on race day. Order now and secure the ultimate co-pilot for your helmet – because your head's chariot should ride in style!  Note: helmet and HANS device are sold separately.

Alpinestars Goanna Gear Bag The Alpinestars Goanna bag stores all the gear you need at the race track in one well-organized place. A separate, waterproof shoe compartment keeps your racing shoes away from your suit, helmet, and other gear. Available in three colorways: Black/Anthracite/Fluorescent Yellow, Black/Anthracite/White, or Black/Blue/Red/Yellow Fluorescent Goanna Racing Gear Bag Details One flat front pocket to store documents and keys Two-strap handle can be used to carry on the shoulder Large lid opening for full access to the main compartment Inner flat zippered mesh pocket Boots/shoes compartment with waterproof removable bag Two side handles to move the bag easily Big screen-printed logos High-visibility lining Premium YKK zipper Bottom and side panels made of waterproof tarpaulin so the bag stays dry even in a wet paddock Webbing reinforcement to give the bag superior structure Inner compartment walls can be removed/reconfigured Goanna Gear Bag Dimensions Dimensions: 32in x 15in x 18in Capacity: 4.4 cu. ft. (125.6 liters)

Alpinestars Race v3 Nomex Fireproof Underlayer Shirt This lightweight Nomex® undergarment gives you exceptional breathability and comfort, along with flame-resistant properties. The Race v3 Series Formula 1 specification tech base layer incorporates a relaxed fit for comfort when wearing under a driving suit. Alpinestars Race v3 Nomex Shirt Construction Advanced tech base layer with Alpinestars innovative flame-resistant technology incorporating elastane fiber for improved engineered elasticity and high levels of comfort. Stretchable construction under the new homologation standard requirements.  Alpinestars Race v3 Nomex Shirt Protection  Certified to the new FIA 8856-2018 homologation standard. Lenzing FR® fire-resistant material Alpinestars Race v3 Nomex Shirt Key Features Soft-touch textile for feel and enhanced comfort. Lenzing FR® material is a natural viscose fiber with unique thermal insulation and flame resistance properties that help prevent heat stress.