All Racing Gloves

OMP ONE-S Racing Gloves The OMP ONE-S Racing Gloves combine lightweight construction, direct steering feedback, and long-session comfort in a proven competition design. Updated graphics give the ONE-S a modern appearance, while external seams, pre-curved fingers, and ergonomically positioned silicone grip zones help the glove feel natural around the steering wheel. A diagonal-cut gauntlet keeps excess material away from the wrist, and the strapless elastic closure allows quick entry without adding bulk. FIA 8856-2018 homologation provides current fire-resistant protection for competitive motorsport. Pre-Curved for a Natural Driving Position The ONE-S is shaped around the position of the hand while gripping a steering wheel. Its pre-curved construction reduces resistance when closing the fingers and helps prevent excess fabric from gathering across the palm. This natural shape allows the driver to maintain a more relaxed grip, which can reduce hand fatigue during longer races and repeated track sessions. External Seams for Improved Comfort External stitching moves the primary finger seams away from the inside of the glove. This creates a smoother interior and reduces pressure points against the fingers while holding the wheel. The external-seam construction also improves fingertip comfort without compromising the close fit needed for accurate use of shifters, switches, buttons, and cockpit controls. Ergonomic Silicone Palm Grip Thin fire-retardant silicone-rubber inserts are printed directly onto the palm to improve steering-wheel traction while preserving sensitivity. The updated grip layout follows the contact areas of the hand rather than covering the entire palm with unnecessary material. Strategic placement helps reduce bunching and allows the glove to flex naturally as the driver changes grip or steering position. Direct Feedback Without a Bulky Palm The low-profile silicone print adds traction without creating a thick barrier between the hand and the steering wheel. This helps the driver feel steering effort, vibration, and changes in front-end grip more clearly. The result is a secure connection that does not require excessive squeezing pressure to maintain control. Diagonal-Cut Gauntlet The ONE-S uses a distinctive diagonal-cut gauntlet designed to reduce interference around the wrist. The angled cuff follows the natural overlap between the glove and racing suit sleeve, helping maintain freedom of movement. Its extended length provides the additional wrist coverage required by modern FIA standards while keeping the glove streamlined. Strapless Elastic Wrist An elastic wrist band keeps the glove securely positioned without using a hook-and-loop strap. The simple closure makes the ONE-S easy to put on and remove while eliminating a bulky adjustment point beneath the suit sleeve. The close wrist fit also helps prevent the glove from shifting during rapid steering corrections and high-load cornering. Latex-Treated Interior The interior receives a latex treatment designed to improve resistance and help the glove remain stable against the hand. This treatment supports a more consistent fit and reduces unwanted internal movement during aggressive driving. OMP ONE-S Racing Glove Construction Lightweight fire-resistant racing glove design Pre-curved construction follows the natural driving position External seams reduce pressure points inside the fingers Thin silicone-rubber grip inserts printed directly onto the palm Ergonomic grip placement helps reduce material bunching Diagonal-cut gauntlet improves wrist movement Elastic wrist provides secure strapless retention Latex-treated interior improves grip and resistance Extended cuff provides increased wrist coverage OMP ONE-S Racing Glove Protection Fire-resistant Nomex construction Extended cuff developed for modern homologation requirements Designed to protect the hands and wrists against heat and flame exposure FIA 8856-2018 homologated OMP ONE-S Racing Glove Specifications Manufacturer: OMP Model: ONE-S Product Type: Nomex Auto Racing Gloves Finger Construction: External seams Fit: Pre-curved Palm: Fire-retardant silicone-rubber grip inserts Interior: Latex-treated Wrist: Elasticated, strapless design Gauntlet: Diagonal-cut extended cuff Homologation: FIA 8856-2018 Why the Diagonal Cuff Matters Most racing gloves use a straight cuff that can create additional material around the wrist. The ONE-S diagonal gauntlet removes material where it is not needed and provides coverage where the racing suit sleeve and glove overlap. This small design detail improves wrist flexibility and helps the glove remain comfortable when the hands are positioned at different points around the wheel. OMP ONE-S Nomex Glove Size Chart Frequently Asked Questions Are the OMP ONE-S Racing Gloves FIA approved?Yes. The OMP ONE-S is homologated to the FIA 8856-2018 standard. What is the benefit of external seams?External seams move the main stitching away from the inside of the fingers, reducing pressure points and improving comfort. Do the ONE-S Gloves have silicone palm grip?Yes. Thin fire-retardant silicone-rubber inserts are printed directly onto the palm for improved traction and steering sensitivity. Why are the grip inserts strategically positioned?The grip is placed in the primary steering-wheel contact zones to improve control while reducing unnecessary material and bunching. What is the purpose of the diagonal-cut gauntlet?The angled cuff improves wrist mobility and creates a cleaner overlap with the sleeve of a compatible racing suit. Do the gloves have a wrist strap?No. The ONE-S uses an elastic wrist band for secure retention and quick entry. What does the latex-treated interior do?It improves resistance and helps reduce movement between the glove and the driver’s hand. How should the OMP ONE-S Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excess material at the fingertips.

OMP Sport Gloves FIA 8856-2018 The OMP Sport Gloves provide modern FIA-certified protection, dependable steering-wheel grip, and lightweight comfort at an accessible price. Designed for drivers who need certified fire-resistant gloves without unnecessary bulk, the OMP Sport combines a silicone-printed palm, flexible construction, and an elastic wrist opening for a secure, straightforward fit. Certified to FIA 8856-2018, these gloves are built for competitive motorsport while remaining comfortable enough for extended driving sessions. Multiple color options make it easy to coordinate the OMP Sport Gloves with your racing suit, shoes, helmet, or team colors. Lightweight Fire-Resistant Racing Gloves The OMP Sport is designed to provide essential protection without making the glove feel heavy or restrictive. Its lightweight fire-resistant construction allows natural finger movement and helps reduce hand fatigue during longer sessions. The streamlined design also minimizes unnecessary material between the driver and the steering wheel, supporting clear feedback and precise control. Silicone-Printed Palm Grip A silicone grip pattern is printed directly onto the palm to improve traction against the steering wheel. The low-profile application provides a secure hold without adding the thickness of a separate reinforcement layer. The printed silicone helps the driver maintain consistent control during braking, cornering, shifting, and repeated steering corrections while preserving sensitivity through the wheel. Reliable Grip as Temperatures Rise Steering wheels and cockpit surfaces can become warm during extended sessions. The silicone-printed palm helps maintain traction as temperatures increase, reducing the need to squeeze the wheel excessively. A more relaxed grip can improve comfort and help the driver maintain smoother steering inputs over the course of a race or track session. Elastic Wrist Entry An elasticated wrist opening makes the OMP Sport Gloves easy to put on and remove while maintaining a snug fit once worn. The strapless design avoids bulky closures and allows clean overlap with a compatible racing suit sleeve. The elastic wrist also helps prevent the glove from shifting during aggressive steering inputs or rapid cockpit movements. Comfort for Extended Driving Sessions The OMP Sport Gloves are shaped to remain comfortable during prolonged use. Their lightweight materials and uncomplicated construction allow the hand to flex naturally around the steering wheel, shifter, and cockpit controls. The glove’s close fit helps reduce excess material at the fingertips and palm, improving dexterity without sacrificing fire-resistant coverage. FIA 8856-2018 Homologated Protection The OMP Sport Gloves are certified to the FIA 8856-2018 homologation standard for protective clothing used in automobile competition. This certification makes them suitable for racing organizations and events that require current FIA-approved fire-resistant driver gloves. Drivers should confirm the specific equipment rules of their sanctioning organization before competition. OMP Sport Nomex Glove Features Lightweight fire-resistant racing glove construction Silicone-printed palm provides dependable steering-wheel grip Low-profile grip pattern preserves steering sensitivity Elastic wrist allows easy entry and secure retention Strapless design reduces bulk beneath the racing suit sleeve Comfortable construction for extended driving sessions Available in multiple color options FIA 8856-2018 homologated OMP Sport Racing Glove Specifications Manufacturer: OMP Model: Sport Product Type: Fire-Resistant Auto Racing Gloves Palm: Silicone-printed grip Wrist: Elasticated entry Closure: Strapless Construction: Lightweight fire-resistant material Homologation: FIA 8856-2018 Accessible FIA-Certified Performance The OMP Sport focuses on the features drivers need most: certified fire protection, secure palm grip, comfortable wrist retention, and a lightweight feel. Its simple construction makes it a practical option for drivers purchasing their first FIA-approved gloves or replacing older equipment with a current homologation. For drivers who value straightforward performance and reliable protection, the OMP Sport delivers a strong balance of comfort, grip, and affordability. OMP Sport Nomex Glove Size Chart Frequently Asked Questions Are the OMP Sport Gloves FIA approved?Yes. The OMP Sport Gloves are homologated to the FIA 8856-2018 standard. Can these gloves be used for wheel-to-wheel racing?Yes, provided the racing organization accepts FIA 8856-2018-certified gloves. Always confirm the current rules for your series or event. How do the OMP Sport Gloves fit?They follow OMP’s standard glove fit and should feel close around the fingers and palm without restricting movement. A snug new fit may relax slightly after several sessions. Do the gloves have silicone palm grip?Yes. Silicone is printed directly onto the palm to improve steering-wheel traction while preserving sensitivity. Does the silicone maintain grip when the steering wheel becomes warm?Yes. The printed silicone is designed to provide consistent traction during extended driving sessions as cockpit temperatures increase. Do the OMP Sport Gloves have a wrist strap?No. An elasticated wrist opening keeps the gloves securely fitted without a separate adjustment strap. Are the OMP Sport Gloves comfortable for long sessions?Yes. Their lightweight construction and low-bulk palm design help reduce hand fatigue during extended driving. How should racing gloves fit at the fingertips?There should be minimal excess material beyond the fingertips. The gloves should fit closely without compressing the fingers or limiting movement.

OMP First Racing Gloves The OMP First Racing Gloves combine lightweight construction, precise steering feedback, and premium comfort at an accessible price. Designed with features commonly found on higher-priced competition gloves, the OMP First uses external seams, a pre-curved hand shape, and low-profile silicone-rubber palm grip to improve control while reducing driver fatigue. An elasticated wrist keeps the glove securely positioned without adding a bulky closure, while the straight-cut extended gauntlet provides clean overlap with a compatible racing suit sleeve. FIA 8856-2018 homologation makes the OMP First suitable for modern motorsport competition where current FIA-approved driver gloves are required. Premium Racing-Glove Features at an Accessible Price The OMP First is designed for drivers who want comfort and performance without stepping into the highest-priced glove category. Its construction focuses on the features that have the greatest effect behind the wheel: smooth internal comfort, secure steering-wheel grip, natural hand movement, and certified fire-resistant protection. The result is a dependable racing glove that feels refined without becoming overly complicated or bulky. External Seams for Maximum Comfort The finger seams are positioned on the outside of the glove rather than against the driver’s skin. This creates a smoother internal surface and reduces pressure points when the fingers are wrapped around the steering wheel. External stitching is often reserved for premium racing gloves because it can significantly improve comfort during long races, testing sessions, and repeated track use. Pre-Curved Driving Fit The OMP First is shaped around the natural position of the hand while gripping a steering wheel. Pre-curved fingers require less effort to close and help prevent excess material from bunching across the palm. This design supports a more relaxed grip, helping reduce hand fatigue while maintaining precise control of paddle shifters, switches, buttons, and gear levers. Printed Silicone-Rubber Palm Grip Fire-retardant silicone-rubber inserts are printed directly onto the palm to provide dependable steering-wheel traction with minimal added thickness. The low-profile grip pattern helps maintain sensitivity and allows the driver to feel steering resistance, vibration, and changes in front-end grip. Because the silicone is printed directly onto the glove, it improves control without creating the bulk of a separate palm reinforcement layer. Secure Grip with Minimal Material Bunching The grip zones are positioned to support the primary contact areas between the hand and steering wheel. This placement improves traction while allowing the glove to flex naturally through braking, cornering, and rapid steering corrections. The combination of a pre-curved shape and thin printed grip helps the glove remain stable without restricting movement. Straight-Cut Extended Gauntlet The straight-cut gauntlet gives the OMP First a clean, traditional appearance while providing additional wrist coverage. Its extended length helps maintain proper overlap with the sleeve of a compatible fire-resistant racing suit. The longer cuff is designed in accordance with current FIA homologation requirements for improved protection against heat and flame exposure. Elasticated Wrist for Easy Entry An elastic band around the wrist keeps the glove securely fitted without requiring a hook-and-loop strap. The flexible opening makes the OMP First easy to put on and remove between sessions while helping prevent unwanted movement during aggressive steering inputs. The strapless design also eliminates a bulky adjustment point beneath the racing suit cuff. FIA 8856-2018 Homologated Protection The OMP First Racing Gloves are certified to the FIA 8856-2018 standard for protective clothing used in automobile competition. The fire-resistant construction and extended cuff provide current protection for the hands and wrists in demanding motorsport environments. Drivers should verify the exact glove certification required by their sanctioning body before competition. OMP First Racing Glove Construction Lightweight fire-resistant racing glove construction External seams reduce interior pressure points Pre-curved fingers follow the natural driving position Printed fire-retardant silicone-rubber palm inserts Low-profile grip preserves steering sensitivity Strategically positioned grip zones reduce bunching Straight-cut extended gauntlet Elastic wrist provides secure retention Easy on-and-off strapless design OMP First Racing Glove Protection Fire-resistant materials designed for motorsport use Extended cuff provides increased wrist coverage Designed for protection against heat and flame exposure FIA 8856-2018 homologated OMP First Racing Glove Specifications Manufacturer: OMP Model: First Product Type: Fire-Resistant Auto Racing Gloves Fit: Pre-curved Seams: External Palm: Printed fire-retardant silicone-rubber inserts Wrist: Elasticated Gauntlet: Straight-cut extended cuff Homologation: FIA 8856-2018 Why Drivers Choose the OMP First The OMP First delivers several construction features normally associated with more expensive racing gloves. External seams help keep stitching away from the fingers, the pre-curved shape reduces hand fatigue, and the printed silicone palm provides secure traction without dulling steering feedback. For drivers seeking an FIA-approved glove with a comfortable fit, dependable grip, and strong overall value, the OMP First remains a proven competition choice. OMP First Racing Glove Size Chart Frequently Asked Questions Are the OMP First Racing Gloves FIA approved?Yes. The OMP First Racing Gloves are homologated to the FIA 8856-2018 standard. What is the advantage of external seams?External seams move the main stitching away from the inside of the fingers, reducing pressure points while gripping the steering wheel. Do the OMP First Gloves have silicone palm grip?Yes. Fire-retardant silicone-rubber inserts are printed directly onto the palm to improve traction and steering sensitivity. How does the pre-curved design improve comfort?The pre-curved shape follows the natural position of the hand around the steering wheel, reducing resistance, material bunching, and fatigue. Do these gloves have a wrist strap?No. An elasticated wrist keeps the glove securely positioned without a separate closure strap. Why does the OMP First have an extended cuff?The extended gauntlet provides additional wrist protection and proper overlap with a compatible racing suit sleeve. How should the OMP First Racing Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips. Are the OMP First Gloves comfortable for long races?Yes. Their external seams, pre-curved construction, lightweight design, and low-profile palm grip are intended to improve comfort during extended driving sessions.

Alpinestars Tech-1 ZX v2 Nomex Racing Gloves The Alpinestars Tech-1 ZX v2 Nomex Racing Gloves are premium fire-resistant driving gloves engineered for exceptional comfort, steering-wheel feel, and protection. Designed for serious competitors, the Tech-1 ZX v2 combines strategically positioned seams, a lightweight aramidic construction, and advanced palm grip technology. Internal stitching around the thumb improves sensitivity when operating steering-wheel buttons and cockpit controls, while externally stitched finger seams reduce pressure points and provide a smooth, comfortable fit during long races. Premium Nomex Racing Glove Construction The Tech-1 ZX v2 features a flame-resistant aramidic fiber main construction with a bonded aramidic lining. This lightweight assembly helps regulate temperature while maintaining the flexibility and sensitivity required for precise driving. Alpinestars uses lightweight printed graphics instead of heavier sewn-on details, helping reduce overall glove weight without sacrificing its professional appearance. Alpinestars Tech-1 ZX v2 Glove Features FIA 8856-2018 homologated for motorsport competition Flame-resistant aramidic fiber main construction Bonded aramidic lining for temperature control and comfort Internal thumb seam for improved control sensitivity External finger seams to reduce pressure points Ergonomic chassis with pre-curved fingers Strategically positioned silicone grip on the palm and fingers Latex-treated inner palm to help reduce micro-slipping Outer grip zones for precise cockpit control Touchscreen-compatible thumb and index fingertips Open-cuff design with a 180-degree elasticated wrist Extended cuff length for increased fire and heat protection Lightweight printed graphics Advanced Palm Grip and Control The inner palm is treated with latex to reduce small movements between the hand and glove while gripping the steering wheel. This helps provide a more secure and consistent connection during high-intensity driving. Ergonomically positioned silicone grip sections across the palm and fingers improve traction without making the glove feel overly stiff. Additional outer grip zones provide improved control when operating switches, paddles, and other cockpit equipment. Internal and External Seam Construction The Tech-1 ZX v2 uses internal stitching around the thumb to improve tactile feedback when operating multiple push-buttons commonly found on modern racing steering wheels. The four fingers use external seams that move bulky stitching away from the inside of the glove. This reduces pressure points and improves comfort, especially during endurance racing and extended track sessions. Pre-Curved Ergonomic Fit The ergonomic chassis and pre-curved fingers follow the natural position of the hands while holding a steering wheel. This helps reduce material bunching and driver fatigue while maintaining a secure and responsive fit. An open-cuff design with a 180-degree elasticated wrist makes the gloves easier to put on and remove while keeping them securely positioned during competition. FIA 8856-2018 Protection The Alpinestars Tech-1 ZX v2 Gloves are certified to the FIA 8856-2018 homologation standard. The extended cuff provides increased wrist and forearm coverage to help protect against fire and heat when worn with an approved racing suit. Touchscreen Compatibility Touch-sensitive material on the thumb and index fingertips allows drivers to operate compatible touchscreen devices, including mobile timing applications and data acquisition equipment, without removing their gloves. Sizing Chart Alpinestars Tech-1 ZX v2 Nomex Racing Gloves FAQs Are the Alpinestars Tech-1 ZX v2 Gloves FIA approved?Yes. The gloves are certified to the FIA 8856-2018 homologation standard for fire-resistant motorsport apparel. Why are the finger seams located on the outside?External finger seams reduce internal pressure points and provide a smoother, more comfortable fit while driving. Why is the thumb seam stitched internally?The internal thumb seam improves sensitivity when operating steering-wheel buttons, switches, and other cockpit controls. What improves the steering-wheel grip?The palm combines a latex treatment with strategically positioned silicone grip sections to reduce slipping and improve control. Are the Tech-1 ZX v2 Gloves touchscreen compatible?Yes. The thumb and index fingertips are designed to operate compatible touchscreen devices. Do these gloves have pre-curved fingers?Yes. The fingers are pre-curved to follow the natural driving position and help reduce material bunching and fatigue. How does the open-cuff design work?The open cuff and 180-degree elasticated wrist make the gloves easier to put on and remove while providing a secure fit around the wrist.

Sparco Arrow K Karting Gloves The Sparco Arrow K Karting Gloves are premium performance gloves developed for drivers who want a close connection with the steering wheel. Their lightweight PA jersey construction, anatomically shaped palm, and high-grip silicone treatment combine precise steering feedback with the flexibility needed for demanding kart competition. Pre-curved fingers follow the natural shape of the hand around the wheel, while external seams reduce pressure against the fingers during long sessions. Touchscreen-compatible material on the thumb and index finger adds practical functionality between races without compromising the glove’s streamlined fit. Direct Steering Feel for Competitive Karting Kart steering systems transmit significant chassis movement and tire feedback directly through the wheel. The Arrow K is designed to preserve that information by using lightweight, flexible materials rather than thick padding or bulky reinforcement layers. The close-fitting construction allows the glove to move naturally with the hand, helping the driver feel changes in steering load, front-tire grip, and track surface conditions. Ultra-Grip Silicone Palm A high-traction silicone treatment covers key areas of the palm to create a secure connection with the steering wheel. The tacky surface helps resist unwanted hand movement during hard braking, rapid direction changes, and high-load corners. Improved traction also allows the driver to hold the wheel with less gripping force. Maintaining a more relaxed grip can reduce strain in the fingers and forearms during extended sessions. Anatomically Shaped Seamless Palm The palm is shaped to follow the natural contours of the hand and minimize excess material around the primary steering-wheel contact areas. Reducing folds and overlapping seams helps create a smoother, more consistent feel against the wheel. This anatomical construction is especially useful for drivers who prioritize detailed steering feedback and find that heavily reinforced gloves feel disconnected or bulky. Pre-Curved Finger Construction The fingers are formed around the position the hand naturally assumes while gripping a kart steering wheel. This pre-curved shape reduces resistance when closing the hand and limits material bunching around the finger joints. The ergonomic design can improve comfort during long races, testing sessions, and repeated heats by reducing the effort required to maintain a consistent driving position. External Seams for Reduced Pressure External finger seams move the stitching away from sensitive areas inside the glove. This creates a smoother interior and helps reduce rubbing, pressure points, and fingertip irritation. Drivers who spend long periods behind the wheel may notice the greatest benefit because the seams are less likely to press against the fingers during repeated steering movement. Lightweight PA Jersey Construction The Arrow K uses flexible PA jersey fabric that stretches with the hand while maintaining a close performance fit. The lightweight material supports natural finger movement and helps prevent the glove from feeling stiff or restrictive. Its streamlined construction also makes the Arrow K well suited to warm-weather karting and physically demanding race conditions where heavier gloves can become uncomfortable. Touchscreen-Compatible Fingertips Touch-sensitive material on the thumb and index finger allows the driver to operate many compatible smartphones, tablets, lap-timing devices, and data displays without removing the gloves. This feature is useful between sessions when checking lap times, reviewing schedules, entering setup notes, or communicating with team members. Close Performance Fit The Arrow K is intended to fit closely around the palm and fingers. A proper fit prevents the glove from shifting independently of the hand and helps the silicone grip remain consistently positioned against the steering wheel. The fingertips should be fully filled without painful pressure, curled fingers, or excess loose material. Drivers between sizes should compare their hand measurements with the Sparco chart rather than relying only on their casual glove size. Sparco Arrow K Karting Glove Features Lightweight PA jersey karting-glove construction Ultra-grip silicone palm for steering-wheel traction Anatomically shaped seamless palm Pre-curved fingers support a natural driving position External seams reduce internal pressure points Close-fitting design preserves steering sensitivity Flexible construction supports natural hand movement Touchscreen-compatible thumb and index finger Designed specifically for kart racing Sparco Arrow K Karting Glove Specifications Manufacturer: Sparco Model: Arrow K Product Type: Kart Racing Gloves Main Material: Lightweight PA Jersey Palm: Anatomically Shaped Seamless Construction Grip: High-Traction Silicone Print Finger Shape: Pre-Curved Seams: External Touchscreen Compatibility: Thumb and Index Finger How the Arrow K Compares with the Sparco Tide K The Arrow K emphasizes lightweight construction, direct steering feel, and a silicone-printed palm. The Sparco Tide K uses Sparco’s more heavily structured 3D HTX palm material, which is designed to add vibration absorption along with grip. Drivers who prefer maximum sensitivity and a lighter glove may favor the Arrow K. Racers seeking more palm cushioning and vibration damping may prefer the Tide K. Who Should Choose the Sparco Arrow K? The Arrow K is a strong option for racers who want a premium glove with high steering sensitivity rather than thick palm padding. Its external seams and pre-curved construction are particularly valuable for drivers who experience finger pressure or fatigue in conventionally stitched gloves. It is also well suited to drivers who regularly use timing devices or smartphones at the track and want touchscreen access without removing their gloves. Sparco Arrow K Karting Glove Size Chart Frequently Asked Questions Is the correct model name Arrow K or Arrow Infinity?Sparco identifies the karting model as the Arrow K. Some retailers may use additional wording in their listings, but Arrow K is the official model designation. Does the Arrow K use the same HTX palm as the Sparco Tide K?No. The Arrow K uses a high-grip silicone palm treatment. The Tide K uses Sparco’s raised 3D HTX material, which provides more vibration absorption and a different steering feel. Is the Arrow K designed more for steering feel or palm cushioning?It is primarily designed for lightweight sensitivity and direct steering feedback. Drivers seeking substantial cushioning may prefer a glove with a thicker or vibration-damping palm. Will the ultra-sticky silicone make it difficult to reposition my hands?The silicone provides strong traction, so the driver may need to lift the hand slightly rather than slide it across the wheel. Most kart racers consider this increased security beneficial during aggressive steering inputs. Are the Arrow K Gloves suitable for long endurance races?Yes. The pre-curved shape and external seams help reduce fatigue and pressure points. However, racers who experience significant steering vibration may prefer a more heavily padded glove. Why does the Arrow K use external seams?External seams keep bulky stitching away from the inside of the fingers, creating a smoother fit and reducing pressure during long sessions. Can the gloves operate a phone while using a screen protector?The thumb and index finger are touchscreen compatible, but responsiveness can vary depending on the device, screen protector thickness, and moisture on the glove or screen. Do these gloves run tighter than casual gloves?They are intended to have a close competition fit. Measure around the widest part of the hand and compare the result with the Sparco size chart rather than selecting by casual glove size alone. What should I do if my fingers fit but the palm feels tight?A slightly snug fit may relax with use, but the glove should not restrict circulation or hand movement. Drivers with wider palms may need to move up one size even when the finger length appears correct. Are the Arrow K Gloves suitable for sim racing?Yes. Their lightweight materials, silicone grip, and external seams can work well for sim racing, though their construction and price are aimed primarily at kart competition. Can these gloves be machine washed?Hand cleaning is safer for the fabric, seams, graphics, and silicone grip. Use cool water and mild soap, then allow the gloves to air dry away from direct heat. How can I keep the silicone palm from wearing prematurely?Use the gloves primarily for driving and avoid handling rough bodywork, tools, exposed fasteners, or abrasive surfaces. Allow them to dry completely before storing them.

OMP First Evo Racing Gloves   The OMP First Evo Racing Gloves deliver premium comfort, responsive steering feel, and FIA-certified protection at an accessible price. Their lightweight construction combines external seams, a pre-curved hand shape, and low-profile silicone-rubber palm inserts to provide many of the features normally associated with higher-priced competition gloves. An elasticated wrist keeps the glove securely positioned without adding a bulky closure, while the straight-cut extended gauntlet provides clean overlap with a compatible racing suit sleeve. FIA 8856-2018 homologation makes the OMP First Evo a dependable option for modern motorsport competition. Premium Comfort Without the Premium Price The OMP First Evo is designed for drivers who want advanced glove construction without moving into the highest price category. Its streamlined design focuses on the features that make the greatest difference behind the wheel: reduced pressure points, secure grip, natural hand movement, and lightweight fire-resistant protection. This combination makes the First Evo a strong choice for drivers who value both performance and overall value. External Seams Reduce Pressure Points The primary finger seams are positioned on the outside of the glove rather than against the driver’s skin. This creates a smoother interior and reduces pressure along the fingers while gripping the steering wheel. External stitching is often found on premium racing gloves because it can significantly improve comfort during endurance races, testing sessions, and long track days. Pre-Curved Driving Fit The OMP First Evo is shaped around the natural position of the hand while holding a steering wheel. Its pre-curved fingers require less effort to close and help prevent excess material from gathering across the palm. This driving-specific shape promotes a more relaxed grip, reducing hand fatigue while maintaining precise operation of paddle shifters, switches, buttons, and gear levers. Printed Silicone-Rubber Palm Grip Fire-retardant silicone-rubber inserts are printed directly onto the palm to provide dependable steering-wheel traction with minimal added thickness. The low-profile grip improves control while preserving sensitivity through the wheel. Drivers can maintain a secure hold while still feeling steering resistance, vibration, and changes in front-end grip. Maximum Grip with Minimum Bulk The printed grip surface eliminates the need for a thick, separate palm reinforcement layer. This helps the glove flex naturally and keeps unnecessary material away from the primary steering-wheel contact areas. The combination of silicone grip and a pre-curved palm allows the driver to maintain control without squeezing the wheel excessively. Straight-Cut Extended Gauntlet The straight-cut gauntlet gives the OMP First Evo a clean, traditional appearance while providing additional wrist coverage. Its extended length helps maintain proper overlap with the sleeve of a compatible fire-resistant racing suit. The longer cuff is designed in accordance with current FIA homologation requirements for increased protection against heat and flame exposure. Elasticated Wrist for Secure Retention An elastic band around the wrist keeps the glove securely fitted without requiring a hook-and-loop strap. The flexible opening makes the First Evo easy to put on and remove while helping prevent unwanted movement during aggressive steering inputs. The strapless design also eliminates a bulky adjustment point beneath the racing suit sleeve. FIA 8856-2018 Homologated Protection The OMP First Evo Racing Gloves are certified to the FIA 8856-2018 standard for protective clothing used in automobile competition. Their fire-resistant construction and extended cuff provide current protection for the hands and wrists in demanding motorsport environments. Drivers should verify the exact glove certification required by their sanctioning organization before competition. OMP First Evo Nomex Glove Construction Lightweight fire-resistant racing glove construction External seams reduce interior pressure points Pre-curved fingers follow the natural driving position Printed fire-retardant silicone-rubber palm inserts Low-profile grip preserves steering sensitivity Straight-cut extended gauntlet Elastic wrist provides secure retention Easy on-and-off strapless design OMP First Evo Nomex Glove Protection Fire-resistant construction developed for auto racing Extended cuff increases wrist and sleeve coverage Designed for protection against heat and flame exposure FIA 8856-2018 homologated OMP First Evo Racing Glove Specifications Manufacturer: OMP Model: First Evo Product Type: Fire-Resistant Auto Racing Gloves Fit: Pre-curved Seams: External Palm: Printed fire-retardant silicone-rubber inserts Wrist: Elasticated Gauntlet: Straight-cut extended cuff Homologation: FIA 8856-2018 Why Drivers Choose the OMP First Evo The OMP First Evo combines several construction features normally associated with more expensive racing gloves. External seams help keep stitching away from the fingers, the pre-curved shape reduces hand fatigue, and the printed silicone palm provides secure traction without dulling steering feedback. For drivers seeking an FIA-approved glove with a refined fit, dependable grip, and strong overall value, the OMP First Evo is an excellent competition-ready choice. OMP First Evo Nomex Glove Size Chart Frequently Asked Questions Are the OMP First Evo Racing Gloves FIA approved?Yes. The OMP First Evo is homologated to the FIA 8856-2018 standard. What is the benefit of external seams?External seams move the main stitching away from the inside of the fingers, reducing pressure points and improving comfort while holding the steering wheel. Do the OMP First Evo Gloves have silicone palm grip?Yes. Fire-retardant silicone-rubber inserts are printed directly onto the palm to improve traction and steering sensitivity. How does the pre-curved shape improve comfort?The pre-curved design follows the natural position of the hand around the steering wheel, reducing resistance, material bunching, and fatigue. Do these gloves use a wrist strap?No. An elasticated wrist keeps the gloves securely positioned without a separate closure strap. Why does the OMP First Evo have an extended cuff?The extended gauntlet provides additional wrist protection and proper overlap with a compatible racing suit sleeve. How should OMP First Evo Racing Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips. Are the OMP First Evo Gloves comfortable for long races?Yes. Their external seams, pre-curved construction, lightweight design, and low-profile palm grip are intended to improve comfort during extended driving sessions.

Alpinestars Tech-1 Race v3 Nomex Gloves The Alpinestars Tech-1 Race v3 Nomex Gloves deliver excellent steering feel, lightweight protection, and premium driving comfort at an accessible price. Developed with construction techniques found in higher-priced racing gloves, the Tech-1 Race v3 combines a bonded aramidic fiber shell, pre-curved fingers, strategically printed silicone grip, and a full-length protective gauntlet. A minimal-seam design helps reduce bulk and pressure points, while the open cuff and 180-degree elasticated wrist allow quick entry without sacrificing a secure fit. Certified to FIA 8856-2018, the Tech-1 Race v3 provides current fire-resistant protection for competitive motorsport. Lightweight Aramidic Fiber Construction The glove’s main structure is made from flame-resistant aramidic fiber bonded for an effective balance of protection, flexibility, and comfort. Alpinestars combines lightweight materials with carefully selected construction methods to reduce overall glove weight without compromising coverage. The lighter design allows the driver to move naturally between the steering wheel, shifter, paddle controls, and cockpit switches while helping reduce fatigue during extended sessions. Pre-Curved Fingers and Palm The Tech-1 Race v3 is shaped around the natural position of the hand while gripping a steering wheel. Pre-curved fingers and a contoured palm reduce the effort required to close the hand and help prevent material from bunching in high-contact areas. This driving-specific shape promotes a more relaxed grip, allowing the driver to maintain control without unnecessary hand tension. Comfort-Focused Finger Construction Inside-stitched seams on all five fingers create a clean exterior and support dependable durability. The carefully shaped finger construction provides a close, responsive fit while maintaining the flexibility needed for steering and cockpit operation. Minimal seam placement across the glove helps reduce unnecessary material and creates a smoother connection between the hand and steering wheel. Extended Silicone Grip Printing Silicone printing extends across the palm and fingers to improve steering-wheel traction and tactile control. The grip pattern is positioned in key contact areas to help the driver maintain a secure hold during braking, cornering, shifting, and rapid steering corrections. Because the silicone is printed directly onto the glove, it provides dependable grip without the thickness of a separate palm layer. Direct Steering Feel and Control The lightweight palm and low-profile silicone print preserve sensitivity through the steering wheel. Drivers can feel steering resistance, vibration, and changes in vehicle balance while maintaining consistent traction. This combination of grip and feedback helps reduce the need to squeeze the wheel excessively, supporting improved comfort and precision over longer runs. Single-Panel Full-Gauntlet Top A full-gauntlet single-panel upper provides streamlined coverage from the hand through the extended cuff. Reducing the number of material transitions helps lower weight and creates a clean, close-fitting profile. The extended cuff provides additional protection around the wrist and supports proper overlap with the sleeve of a compatible fire-resistant racing suit. Open Cuff with 180-Degree Elasticated Wrist Alpinestars’ open-cuff design makes the Tech-1 Race v3 quick and easy to put on between sessions. A 180-degree elasticated wrist holds the glove securely once fitted without requiring a bulky external strap. The design combines easy entry in the pits with stable retention while the driver is in the car. Reduced-Weight Printed Graphics External printed design details give the glove a distinctive Alpinestars appearance without adding the weight and stiffness associated with heavier embroidered overlays. The low-profile graphics complement the glove’s lightweight construction while maintaining a professional competition look. FIA 8856-2018 Homologated Protection The Alpinestars Tech-1 Race v3 Nomex Gloves are certified to the FIA 8856-2018 standard for protective clothing used in automobile competition. The fire-resistant aramidic construction and extended cuff meet modern requirements for heat and flame protection. Drivers should verify the homologation requirements of their specific racing organization before competition. Alpinestars Tech-1 Race v3 Glove Construction Bonded flame-resistant aramidic fiber main construction Lightweight materials reduce overall glove weight Minimal-seam design improves comfort and sensitivity Inside-stitched seams on all five fingers Pre-curved fingers and palm follow the natural driving position Full-gauntlet single-panel upper construction Extended silicone printing across the palm and fingers Low-profile printed graphics reduce added weight Alpinestars Tech-1 Race v3 Glove Features Excellent steering-wheel feel and tactile feedback Silicone palm and finger grip improves control Pre-curved construction helps reduce hand fatigue Open cuff allows easy entry and removal 180-degree elasticated wrist provides secure retention Extended cuff improves wrist and sleeve coverage Lightweight construction supports natural hand movement FIA 8856-2018 homologated Alpinestars Tech-1 Race v3 Glove Specifications Manufacturer: Alpinestars Model: Tech-1 Race v3 Product Type: Nomex Auto Racing Gloves Main Material: Flame-resistant aramidic fiber Finger Construction: Pre-curved with inside-stitched seams Palm: Extended silicone grip print Upper: Single-panel full-gauntlet construction Wrist: 180-degree elasticated design Cuff: Open extended gauntlet Homologation: FIA 8856-2018 Premium Performance Without the Premium Price The Tech-1 Race v3 offers a strong combination of advanced fit, lightweight materials, secure silicone grip, and modern FIA protection. Its pre-curved shape supports natural steering control, while the minimal-seam construction and elasticated wrist improve comfort and convenience. For drivers seeking a responsive FIA-approved glove with many of the features found in Alpinestars’ higher-level models, the Tech-1 Race v3 delivers excellent performance and value. Alpinestars Tech-1 Race v3 Nomex Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 Race v3 Gloves FIA approved?Yes. The gloves are homologated to the FIA 8856-2018 standard. What material are the gloves made from?The main construction uses bonded flame-resistant aramidic fiber for protection, comfort, and reduced weight. Do the gloves have silicone palm grip?Yes. Extended silicone printing is positioned across the palm and fingers to improve grip and steering control. How do the pre-curved fingers improve comfort?The pre-curved shape follows the natural position of the hand around the steering wheel, helping reduce resistance, bunching, and fatigue. Do the Tech-1 Race v3 Gloves have a wrist strap?No. A 180-degree elasticated wrist provides secure retention without a separate adjustment strap. What is the benefit of the open-cuff design?The open cuff makes the gloves easier to put on and remove while the elasticated wrist keeps them securely positioned during driving. Why is the cuff extended?The extended gauntlet provides additional wrist coverage and proper overlap with a compatible racing suit sleeve. How should the Tech-1 Race v3 Gloves fit?They should fit closely around the palm and fingers without restricting movement or leaving excessive material at the fingertips.

OMP Sport Gloves FIA 8856-2018 The OMP Sport Gloves provide certified fire-resistant protection, dependable steering-wheel grip, and lightweight comfort at an accessible price. Homologated to the FIA 8856-2018 standard, these racing gloves are well suited for HPDE events, autocross, time trials, club racing, and other motorsport applications requiring approved driver equipment. Silicone printing across the palm creates a secure connection with the steering wheel, while the elasticated wrist makes the gloves easy to put on and helps keep them securely positioned throughout each session. Their straightforward construction gives drivers the protection and control they need without unnecessary bulk. Certified Protection at an Accessible Price The OMP Sport Gloves are designed for drivers who need current FIA-approved protection without moving into a premium racing-glove price category. They combine essential safety features with a comfortable construction that works well for both developing drivers and experienced club-level competitors. FIA 8856-2018 homologation makes them suitable for many competitive motorsport events requiring certified fire-resistant driver apparel. Drivers should always confirm the specific equipment requirements of their sanctioning organization or racing series. Silicone-Printed Palm Grip Silicone printing across the palm improves traction between the glove and steering wheel. The low-profile design helps provide a secure grip without adding a bulky reinforcement layer that could reduce steering feedback. The additional traction allows the driver to maintain control with a more relaxed grip, which can help reduce unnecessary hand and forearm fatigue during longer sessions. Lightweight Driving Comfort The lightweight construction allows natural hand movement and maintains sensitivity through the steering wheel. This makes the OMP Sport a practical option for track days, qualifying sessions, sprint races, and extended driving events. A close-fitting design minimizes excess material around the hand while allowing the driver to operate paddle shifters, switches, buttons, and other cockpit controls with confidence. Elasticated Wrist Entry An elasticated wrist opening allows quick entry and removal while helping keep the glove securely positioned during competition. The streamlined closure eliminates the need for a bulky adjustment strap and provides a clean overlap with compatible racing-suit sleeves. Versatile OMP Styling The OMP Sport Gloves are offered in multiple color combinations, allowing drivers to coordinate them with OMP racing suits, shoes, helmets, and other equipment. Their modern graphics provide a recognizable competition look while maintaining a practical, performance-focused design. OMP Sport Racing Glove Features Fire-resistant auto racing glove construction FIA 8856-2018 homologated Silicone-printed palm for secure steering-wheel grip Low-profile grip design preserves steering sensitivity Lightweight construction for extended driving comfort Elasticated wrist for easy entry and secure retention Close-fitting design supports dexterity and cockpit control Available in multiple OMP color combinations OMP Sport Glove Specifications Manufacturer: OMP Model: Sport Product Type: Fire-Resistant Auto Racing Gloves Palm: Silicone-Printed Grip Wrist Closure: Elasticated Entry Homologation: FIA 8856-2018 Recommended Use: HPDE, Autocross, Time Trial, Club Racing, and Competitive Motorsport Why Choose the OMP Sport Gloves? The OMP Sport Gloves focus on the features drivers use every lap: certified fire protection, secure steering grip, comfortable hand movement, and a simple elasticated wrist. Their approachable price makes them a strong choice for new competitors purchasing their first FIA-approved gloves or experienced drivers looking for dependable track equipment. OMP Sport Glove Size Chart Frequently Asked Questions Are the OMP Sport Gloves FIA approved?Yes. The OMP Sport Gloves are homologated to the FIA 8856-2018 standard for fire-resistant driver clothing. Can these gloves be used for wheel-to-wheel racing?Yes, provided FIA 8856-2018-approved gloves meet the requirements of the racing series, sanctioning organization, or event. Are the OMP Sport Gloves suitable for beginners?Yes. Their combination of certified protection, comfortable construction, dependable grip, and accessible pricing makes them a practical choice for developing drivers. Do the palms have silicone grip?Yes. Silicone printing across the palm improves traction and steering-wheel control without adding excessive bulk. How do the OMP Sport Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips. Most drivers begin with their usual OMP glove size. Do the gloves have an adjustable wrist strap?No. The elasticated wrist provides a secure fit without requiring a separate hook-and-loop adjustment strap. Are they comfortable for long track sessions?Yes. Their lightweight construction and streamlined fit are designed to support comfort and dexterity during extended driving sessions. How should the OMP Sport Gloves be cleaned?Gently hand wash them using mild soap and cool water, then allow them to air dry. Avoid bleach, harsh chemicals, machine drying, and direct high heat.

Alpinestars Tech-1 Start v3 Nomex Racing Gloves The Alpinestars Tech-1 Start v3 Nomex Gloves are engineered to provide lightweight protection, precise steering-wheel control, and lasting comfort for competitive auto racing. Designed with a single upper panel and an innovative finger construction, these racing gloves reduce excess material throughout the fingers while lowering the overall weight of the glove. The streamlined design creates a close, anatomically optimized fit that is especially beneficial inside confined racing cockpits. Drivers receive improved freedom of movement, reduced bulk, and a more direct connection with the steering wheel and vehicle controls. Lightweight Single-Panel Construction The single-panel upper construction minimizes unnecessary seams and material across the glove. This helps improve flexibility and reduces potential pressure points during long races, qualifying sessions, and track days. By reducing excess fabric in the fingers, the Tech-1 Start v3 offers a more precise fit and improved dexterity without sacrificing the protection required for motorsport competition. Innovative Finger Design Box-cut fingertip construction provides a comfortable and natural finger position while helping reduce material buildup near the fingertips. The middle and ring fingers use a seamless, no-fourchette design that eliminates the traditional fabric panels between the fingers. This construction creates a less restrictive feel and allows the glove to conform more closely to the driver’s hand. The reduced bulk is particularly useful when operating steering-wheel buttons, switches, paddles, and other controls inside compact racing cockpits. Silicone Palm Grip Ergonomically positioned silicone-printed zones across the palm provide enhanced grip on the steering wheel. The strategically placed silicone helps reduce unwanted hand movement and allows the driver to maintain control without applying excessive gripping pressure. The improved grip can help reduce hand fatigue while providing a more consistent steering feel during demanding driving conditions. Extended Elasticated Cuff The close-fitting, straight cuff extends beyond the wrist to provide dependable coverage between the gloves and racing suit. An elasticated wrist allows for easy entry while helping keep the glove securely positioned once fitted. The streamlined cuff design also reduces unnecessary bulk around the wrist and fits comfortably beneath or over the cuff of a compatible racing suit. FIA and SFI-Certified Racing Protection The Alpinestars Tech-1 Start v3 Gloves are certified to FIA 8856-2018 and SFI 3.3/5 standards for use in sanctioned motorsport competition. These certifications make the gloves suitable for many professional, club-level, endurance, road-racing, and grassroots motorsport applications. Always confirm the required safety standard with your racing organization or sanctioning body before competition. Alpinestars Tech-1 Start v3 Nomex Glove Features Lightweight Nomex auto-racing glove construction Single upper panel reduces seams and overall weight Innovative finger construction reduces excess material Box-cut fingertip design for improved comfort and fit Seamless no-fourchette construction on the middle and ring fingers Anatomically optimized for confined racing cockpits Ergonomically positioned silicone palm grip zones Enhanced steering-wheel grip and control Close-fitting straight extended cuff Elasticated wrist for easy entry and a secure fit Designed to improve dexterity and reduce hand fatigue FIA 8856-2018 certified SFI 3.3/5 certified Ideal for Multiple Racing Applications The Tech-1 Start v3 is an excellent choice for drivers who need certified protection without the weight and bulk of a heavier racing glove. Its close-fitting design and silicone palm grip make it suitable for road racing, autocross, time trials, endurance racing, track days, and other forms of competitive motorsport. Why Choose the Alpinestars Tech-1 Start v3 Gloves? These gloves combine certified fire-resistant protection with a lightweight, driver-focused construction. The reduced-material finger design improves comfort and dexterity, while the silicone palm zones provide the grip needed for accurate steering input. For drivers seeking an affordable Alpinestars racing glove with FIA and SFI certification, the Tech-1 Start v3 delivers a strong balance of protection, comfort, and control. Alpinestars Tech-1 Start v3 Nomex Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 Start v3 Gloves fire resistant?Yes. These gloves are designed for auto racing and use fire-resistant materials appropriate for certified motorsport competition. What certifications do the Tech-1 Start v3 Gloves have?They are certified to FIA 8856-2018 and SFI 3.3/5 standards. What is a no-fourchette finger design?A no-fourchette design removes the traditional material panels between selected fingers. This reduces bulk and creates a closer, more anatomically optimized fit. Do these gloves have silicone on the palm?Yes. Ergonomically positioned silicone-printed zones provide enhanced grip on the steering wheel. Are these gloves suitable for kart racing?They are designed as fire-resistant auto-racing gloves. Karting organizations may use different certification requirements, so drivers should confirm the rules for their specific series. How should Alpinestars racing gloves fit?They should fit closely without restricting movement or causing uncomfortable pressure at the fingertips. A secure fit helps preserve steering feel and control.

Sparco CRW Racing Gloves The Sparco CRW Racing Gloves are purpose-built for drivers competing in cold, damp, and challenging weather conditions. Their thermal neoprene construction helps retain warmth while maintaining the flexibility and steering-wheel feel needed for precise vehicle control. Thermally sealed seams help reduce moisture penetration, while the coated high-grip palm provides dependable traction when rain, spray, and low temperatures make the cockpit more difficult to manage. A flexible nylon and spandex outer layer supports natural hand movement without adding unnecessary bulk. Cold-Weather Protection for Motorsport Low temperatures can reduce hand dexterity, steering sensitivity, and driver comfort. The Sparco CRW Gloves provide added insulation for wet karting sessions, rally stages, autocross events, and other motorsport activities held in cold or unpredictable weather. The close-fitting construction helps preserve control of the steering wheel, paddle shifters, switches, and other cockpit components while providing more warmth than a traditional lightweight driving glove. Thermal Neoprene Construction Flexible neoprene forms the primary thermal layer of the Sparco CRW. The material helps retain body heat while conforming closely to the hand, allowing the driver to maintain a secure and natural grip. Unlike bulky winter gloves, the CRW is designed specifically for driving. Its streamlined shape limits excess material around the fingers and palm, helping preserve steering feedback and cockpit dexterity. Thermally Sealed Seams Thermally sealed seams help limit the entry of water and cold air through the glove construction. This provides improved comfort during light rain, track spray, damp paddock conditions, and low-temperature competition. The sealed design also helps retain warmth inside the glove, allowing the driver to remain focused when weather conditions begin to deteriorate. High-Grip Coated Palm A coated high-grip palm creates a secure connection between the driver and steering wheel. The grip surface is especially beneficial when the cockpit, wheel, or gloves become damp during wet-weather driving. The low-profile coating adds traction without creating excessive thickness, helping the driver retain steering sensitivity while reducing the need to squeeze the wheel tightly. Flexible Nylon and Spandex Outer Layer The exterior coating is constructed from 80% nylon and 20% spandex. This combination provides durability, stretch, and flexibility while allowing the glove to move naturally with the hand. The stretch outer layer supports repeated steering inputs and finger movement without compromising the thermal benefits of the neoprene construction. Elasticized Wrist An elasticized wrist provides a close, secure fit and helps reduce the entry of cold air. The streamlined closure also makes the gloves easy to put on and remove without requiring a bulky external adjustment strap. The extended wrist area provides additional coverage and can overlap with compatible outerwear or driving apparel for improved protection from the elements. Water-Resistant Construction The Sparco CRW Gloves are designed to resist moisture during damp and wet-weather use. Their neoprene materials and sealed seams help keep the hands warmer and more comfortable when exposed to rain or track spray. These gloves should be considered water resistant rather than completely waterproof, particularly during prolonged exposure or full immersion. Sparco CRW Racing Glove Features Thermal neoprene construction for cold-weather driving Thermally sealed seams help reduce moisture penetration Coated high-grip palm improves steering-wheel control Ergonomic shape supports natural hand movement Flexible construction helps preserve steering feedback Elasticized wrist helps retain warmth and block cold air Water-resistant design for damp and wet conditions Outer coating constructed from 80% nylon and 20% spandex Suitable for karting, rally, autocross, and track-day use Sparco CRW Glove Specifications Manufacturer: Sparco Model: CRW Product Type: Cold and Wet-Weather Racing Gloves Primary Material: Thermal Neoprene Outer Material: 80% Nylon and 20% Spandex Palm: Coated High-Grip Surface Seams: Thermally Sealed Wrist: Elasticized Entry Weather Protection: Water Resistant Recommended Conditions: Cold, Damp, and Wet-Weather Motorsport Why Choose the Sparco CRW Gloves? The Sparco CRW is designed for weather conditions where a conventional lightweight driving glove may not provide enough warmth or moisture protection. Its thermal neoprene construction, sealed seams, elasticized wrist, and coated palm work together to provide a practical balance of insulation, flexibility, and grip. For cold karting events, wet rally stages, early-season autocross competition, and rainy track days, the CRW helps drivers maintain comfort and confidence without sacrificing essential steering control. Sparco CRW Glove Size Chart Frequently Asked Questions Are the Sparco CRW Gloves waterproof?The gloves are water resistant and designed to help repel moisture during wet-weather driving. They are not intended to remain completely waterproof during prolonged exposure or full immersion. What conditions are the Sparco CRW Gloves designed for?They are designed for cold, damp, and wet motorsport conditions where additional warmth and moisture resistance are beneficial. What materials are used in the Sparco CRW Gloves?The gloves use a thermal neoprene construction with an outer coating made from 80% nylon and 20% spandex. Do the palms provide good steering-wheel grip?Yes. The coated high-grip palm is designed to improve traction and control, including when the steering wheel or gloves become damp. Will the neoprene construction restrict hand movement?The ergonomic shape and flexible materials are designed to provide warmth while preserving finger movement, steering feel, and cockpit dexterity. Do the gloves have sealed seams?Yes. Thermally sealed seams help reduce the entry of moisture and cold air while retaining warmth inside the gloves. Are the Sparco CRW Gloves suitable for karting?Yes. They are suitable for karting, rally, autocross, track days, and other driving activities held in cold or wet conditions. Are these gloves FIA homologated?The Sparco CRW is designed primarily as a cold and wet-weather driving glove. Confirm the current product certification and your sanctioning organization’s requirements before using it in an event that requires homologated fire-resistant gloves. Are the Sparco CRW Gloves suitable for warm-weather racing?They are primarily intended for cold and wet environments. A lighter and more breathable racing glove may be more comfortable in warm, dry conditions. How should the Sparco CRW Gloves be cleaned?Gently hand wash them with mild soap and cool water, then allow them to air dry completely. Avoid bleach, harsh chemicals, machine drying, and direct high heat.

OMP First-S Race Gloves The OMP First-S Race Gloves combine dependable fire-resistant protection, secure steering-wheel grip, and everyday comfort in an affordable competition glove. Updated to meet the FIA 8856-2018 homologation standard, the First-S is designed for drivers who want modern safety and straightforward performance without stepping into a premium price category. Silicone printing across the palms and fingers improves traction and control, while redesigned finger inserts provide a closer, more comfortable fit. A straight-cut cuff with an elasticated wrist allows quick entry and keeps the glove securely positioned throughout each session. Affordable FIA-Approved Performance The OMP First-S is built for drivers who need certified protection and reliable control at a practical price. Its lightweight construction focuses on the features that matter most behind the wheel: grip, comfort, flexibility, and current FIA approval. This makes the First-S a strong choice for drivers replacing older equipment or purchasing their first pair of FIA-homologated racing gloves. Silicone Palm and Finger Grip Silicone printing is applied across the palm and fingers to create a secure connection with the steering wheel. The low-profile grip pattern improves traction without adding the bulk of a separate reinforcement layer. Extending the silicone onto the fingers also improves control of paddle shifters, switches, buttons, and other cockpit controls. Improved Finger Inserts Redesigned finger inserts help the glove follow the natural shape of the hand more closely. The improved construction reduces excess material and supports better comfort around the fingers during repeated steering inputs. A more precise fit can also improve dexterity and reduce hand fatigue during longer sessions. Comfort for Extended Track Use The OMP First-S is designed to remain comfortable through repeated laps and long track days. Its lightweight materials allow natural hand movement while minimizing unnecessary pressure and bulk. The close-fitting construction helps the driver maintain a relaxed grip rather than squeezing the wheel excessively to stay in control. Straight-Cut Elasticated Wrist A straight-cut cuff gives the First-S a clean, traditional appearance and allows easy overlap with a compatible racing suit sleeve. The elasticated wrist keeps the glove securely positioned without requiring a bulky hook-and-loop strap. The flexible opening also makes the gloves quick and easy to put on or remove between sessions. Modern OMP Styling The OMP First-S features updated graphics and is available in multiple color options. Drivers can coordinate the gloves with OMP suits, shoes, helmets, and other racing equipment for a consistent competition look. FIA 8856-2018 Homologated Protection The OMP First-S Race Gloves are homologated to FIA 8856-2018, the current standard for fire-resistant driver clothing used in many forms of automobile competition. Drivers should always confirm the exact equipment requirements of their sanctioning organization before entering an event. OMP First-S Nomex Glove Features Lightweight fire-resistant racing glove construction Silicone printing across the palm and fingers Low-profile grip preserves steering sensitivity Improved finger inserts enhance fit and comfort Straight-cut cuff provides a clean, streamlined fit Elasticated wrist allows easy entry and secure retention Available in multiple modern colorways FIA 8856-2018 homologated OMP First-S Nomex Glove Specifications Manufacturer: OMP Model: First-S Product Type: Fire-Resistant Auto Racing Gloves Palm: Silicone-printed grip Fingers: Silicone grip print with improved inserts Wrist: Elasticated closure Cuff: Straight cut Available Sizes: XS through XXL Homologation: FIA 8856-2018 Why Choose the OMP First-S? The First-S offers a practical balance of certified protection, secure grip, and comfort. Its silicone palm and finger print improve control, while the updated finger construction and elasticated wrist keep the fit simple and dependable. For drivers seeking a current FIA-approved glove with strong value and recognizable OMP styling, the First-S is an excellent competition-ready option. OMP First-S Nomex Glove Size Chart Frequently Asked Questions Are the OMP First-S Race Gloves FIA approved?Yes. The OMP First-S is homologated to the FIA 8856-2018 standard. Can the OMP First-S Gloves be used for competitive racing?Yes, when FIA 8856-2018-approved gloves meet the requirements of the racing organization or event. Do the gloves have silicone grip on the fingers?Yes. Silicone printing covers both the palm and fingers to improve steering-wheel and cockpit control. What is the benefit of the improved finger inserts?They provide a closer, more comfortable fit while reducing excess material and helping maintain dexterity. Do the OMP First-S Gloves have a wrist strap?No. An elasticated wrist keeps the gloves securely positioned without a separate adjustment strap. What sizes are available?The OMP First-S Race Gloves are available in sizes XS through XXL. Are these gloves suitable for long races or track sessions?Yes. Their lightweight construction and improved finger fit are designed to reduce fatigue during extended use. How should I clean the OMP First-S Gloves?Hand wash them gently with mild soap and cool water, then allow them to air dry. Avoid machine washing, bleach, strong chemicals, and high heat. How should the OMP First-S Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips.

Alpinestars Engine Pit Gloves The Alpinestars Engine Pit Gloves combine lightweight comfort, practical hand protection, and the dexterity mechanics need when working in the garage, paddock, or pit lane. Their hybrid multi-material construction uses breathable stretch mesh, flexible fabric panels, and a durable synthetic suede palm to balance cooling performance with dependable grip and wear resistance. A strategically positioned TPR knuckle insert adds impact protection without making the glove feel excessively bulky. Conductive printing on the palm and fingers also allows mechanics and crew members to operate compatible tablets, phones, and handheld diagnostic devices without removing their gloves. Designed for Fast, Precise Pit Work Working around a race car requires a glove that protects the hands without interfering with tools, fasteners, switches, or small components. The Alpinestars Engine Pit Glove is shaped to support natural hand movement while maintaining the tactile feedback needed for detailed mechanical work. Its short-cuff design keeps the wrist area unrestricted, while the hook-and-loop closure allows the fit to be adjusted quickly and securely between jobs. Advanced TPR Knuckle Protection A flexible thermoplastic rubber insert is positioned across the knuckle area to help protect against bumps and impacts commonly encountered while working around engines, suspension components, bodywork, and workshop equipment. The low-profile design follows the shape of the hand, delivering added protection while preserving the flexibility required to grip tools and reach into confined areas. Breathable Stretch Construction Stretch mesh and flexible fabric panels across the top of the hand promote airflow and help reduce heat buildup during long work sessions. The lightweight materials conform to the hand and support repeated movement without creating unnecessary resistance. An ergonomic stretch insert between the thumb and palm improves mobility through one of the hand’s highest-movement areas, making it easier to grasp tools, lift parts, and operate equipment. Durable Synthetic Suede Palm The synthetic suede palm provides a combination of grip, durability, and tactile sensitivity. It helps the wearer maintain control of tools and components while remaining flexible enough for precision work. Strategic palm padding improves comfort when handling equipment or applying pressure, while reinforced synthetic suede around the thumb increases durability in an area exposed to frequent friction and wear. Touchscreen-Compatible Controls Conductive printing allows compatible touchscreen devices to be operated while the gloves remain on. This is useful for mechanics referencing setup data, entering service notes, checking timing information, or using diagnostic applications in the paddock. The touchscreen-compatible design reduces interruptions and helps keep the hands protected when moving between physical work and digital equipment. Strategic Finger Padding Two-millimeter foam padding is positioned along the fingers to improve comfort and fit without significantly reducing dexterity. The padding provides additional cushioning when handling tools, equipment, and vehicle components. The shaped finger construction supports a close, controlled fit, helping reduce excess material that could interfere with detailed tasks. Secure Short-Cuff Closure A hook-and-loop closure on the back of the hand allows the glove to be tightened for a precise and secure fit. The short cuff provides unrestricted wrist movement and makes the gloves quick to put on or remove during busy pit and workshop operations. Fade-Resistant Alpinestars Styling Sublimated graphics on the back of the hand create a distinctive Alpinestars appearance while resisting fading from regular use. The technical styling complements professional race-team apparel and workshop uniforms without compromising the glove’s functional design. Alpinestars Engine Pit Glove Features Hybrid multi-material mechanic and pit-crew glove Advanced TPR knuckle insert for low-profile impact protection Lightweight stretch mesh promotes airflow and cooling Flexible stretch fabric supports natural hand movement Ergonomic insert between the thumb and palm improves mobility Synthetic suede palm provides grip, durability, and tactility Padded palm improves comfort during demanding work Synthetic suede thumb reinforcement increases wear resistance Conductive print supports compatible touchscreen devices Strategic 2mm foam finger padding improves fit and comfort Hook-and-loop cuff closure provides a precise fit Short-cuff design allows unrestricted wrist movement Sublimated backhand graphics resist fading Alpinestars Engine Pit Glove Specifications Manufacturer: Alpinestars Model: Engine Product Type: Pit Crew and Mechanic Gloves Backhand: Stretch Mesh and Stretch Fabric Palm: Padded Synthetic Suede Knuckle Protection: Flexible TPR Insert Finger Padding: Strategic 2mm Foam Closure: Hook-and-Loop Wrist Adjustment Cuff: Short-Cuff Design Device Compatibility: Conductive Touchscreen Print Why Choose the Alpinestars Engine Pit Gloves? The Alpinestars Engine Pit Gloves are made for mechanics and crew members who need protection without losing the hand movement required for detailed work. Breathable materials help manage heat, the synthetic suede palm improves grip and durability, and the flexible TPR knuckle insert adds protection in a practical, low-profile design. Touchscreen compatibility and a secure short-cuff closure make the Engine Glove especially useful in modern racing environments where mechanics regularly move between tools, vehicle components, tablets, and diagnostic equipment. Alpinestars Engine Pit Glove Size Chart Frequently Asked Questions What are the Alpinestars Engine Pit Gloves designed for?They are designed for mechanics, technicians, pit crews, and other users who need lightweight hand protection, grip, and dexterity while working around vehicles and equipment. Do the gloves provide knuckle protection?Yes. A strategically positioned TPR insert helps protect the knuckles from minor impacts without significantly limiting hand movement. Are the Alpinestars Engine Gloves touchscreen compatible?Yes. Conductive printing on the palm and fingers allows operation of many compatible phones, tablets, and handheld devices. Are the gloves breathable?Yes. Stretch mesh and lightweight fabric panels on the back of the hand promote airflow and help reduce heat buildup. What material is used on the palm?The palm is made from padded synthetic suede for a combination of grip, durability, comfort, and tactile feedback. Do the gloves have finger padding?Yes. Strategic 2mm foam padding improves comfort and helps provide a secure fit around the fingers. How are the gloves secured at the wrist?A hook-and-loop closure on the back of the hand allows the wearer to adjust the short cuff for a precise and secure fit. Are these fire-resistant racing gloves?No fire-resistant certification is specified for the Alpinestars Engine Pit Gloves. They are intended primarily for mechanical, pit-crew, and workshop use rather than as homologated driver gloves. How should the Alpinestars Engine Pit Gloves fit?They should fit closely around the palm and fingers without restricting movement. A snug fit helps maintain control of tools and small components while minimizing excess material. How should the gloves be cleaned?Clean them gently with mild soap and cool water, then allow them to air dry. Avoid bleach, harsh chemicals, machine drying, and direct high heat.

Sparco Meca 3 Pit Gloves The Sparco Meca 3 Pit Gloves are lightweight mechanic gloves designed for precise work in the garage, paddock, workshop, and pit area. Their flexible construction gives technicians the hand movement and tactile feedback needed when handling tools, fasteners, vehicle components, and equipment. An elasticized, scuff-resistant backhand moves naturally with the hand, while the synthetic suede palm provides durability and dependable grip. Reinforcement between the thumb and index finger strengthens a high-wear area without adding unnecessary bulk. Built for Hands-On Mechanical Work The Meca 3 is designed for mechanics and crew members who need protection without sacrificing dexterity. Its close-fitting shape helps reduce excess material around the fingers, making it easier to work with sockets, wrenches, electrical connectors, body fasteners, and small components. The lightweight design also makes the gloves practical for repeated use during setup changes, inspections, repairs, loading, and general workshop tasks. Flexible Scuff-Resistant Backhand The back of the glove uses an elasticized printed fabric that stretches with the hand during movement. Its scuff-resistant construction helps withstand regular contact with tools, equipment, bodywork, and surrounding workshop surfaces. This flexible upper construction allows the fingers and knuckles to move naturally while helping the glove maintain a secure, controlled fit. Durable Synthetic Suede Palm A synthetic suede palm provides grip, durability, and tactile sensitivity for mechanical work. The material allows the wearer to maintain control of tools and components without the stiffness associated with heavier work gloves. The palm construction is intended to balance protection with the feedback needed for detailed tasks and repeated handling. Reinforced Thumb and Index-Finger Area Additional reinforcement is positioned between the thumb and index finger, an area that experiences frequent friction when gripping tools, lifting components, and turning fasteners. This targeted reinforcement improves durability while preserving flexibility across the rest of the hand. Breathable Finger Panels Breathable panels positioned between the fingers improve ventilation and help manage heat during extended work sessions. The added airflow supports comfort when working in warm garages, enclosed workshops, or busy pit environments. The flexible finger construction also allows the hand to open, close, and grip naturally without excessive resistance. Secure Adjustable Wrist Closure A hook-and-loop wrist strap allows the Meca 3 to be adjusted for a close and secure fit. The closure helps prevent the glove from shifting while working and makes it quick to put on or remove between tasks. Important Safety Information The Sparco Meca 3 Pit Gloves are not fire resistant or heat resistant. They are intended for mechanic, workshop, paddock, and pit-support use. Do not use these gloves as a substitute for FIA-, SFI-, or Nomex-certified racing gloves in competition environments that require homologated fire-resistant driver equipment. Sparco Meca 3 Pit Glove Features Lightweight pit-crew and mechanic glove construction Elasticized backhand supports natural hand movement Printed scuff-resistant fabric improves durability Synthetic suede palm provides grip and tactile feedback Reinforcement between the thumb and index finger Breathable panels between the fingers improve airflow Close-fitting design supports precision work Adjustable hook-and-loop wrist closure Suitable for workshop, paddock, garage, and pit-area tasks Sparco Meca 3 Pit Glove Specifications Manufacturer: Sparco Model: Meca 3 Product Type: Pit Crew and Mechanic Gloves Backhand: Elasticized Scuff-Resistant Fabric Palm: Synthetic Suede Reinforcement: Thumb and Index-Finger Grip Area Ventilation: Breathable Finger Panels Closure: Adjustable Hook-and-Loop Wrist Strap Fire Resistance: None Heat Resistance: None Why Choose the Sparco Meca 3? The Sparco Meca 3 delivers the dexterity, grip, and durability needed for everyday mechanical work. Its synthetic suede palm and reinforced grip area help manage wear, while the flexible backhand and breathable finger panels improve comfort during extended use. For mechanics and crew members who need a lightweight glove for precise vehicle work, the Meca 3 provides a practical combination of protection, control, and recognizable Sparco styling. Sparco Meca 3 Pit Glove Size Chart Frequently Asked Questions What are the Sparco Meca 3 Gloves designed for?They are designed for mechanics, technicians, pit crews, and workshop users who need lightweight hand protection and good dexterity. Are the Sparco Meca 3 Gloves fire resistant?No. These gloves are not fire resistant and should not be used where certified fire-resistant racing gloves are required. Are the Meca 3 Gloves heat resistant?No. They are not designed to protect against hot exhaust components, engines, brakes, flames, or other high-temperature surfaces. What material is used on the palm?The palm is made from durable synthetic suede that provides grip, scuff resistance, and tactile feedback. Do the gloves have reinforced wear areas?Yes. Reinforcement is positioned between the thumb and index finger to improve durability in a frequently used grip area. Are the Sparco Meca 3 Gloves breathable?Yes. Panels between the fingers improve airflow and help keep the hands more comfortable during extended work sessions. How are the gloves secured?An adjustable hook-and-loop wrist strap provides a close and secure fit. Can these gloves be used as racing driver gloves?No. They are mechanic gloves and should not replace FIA-, SFI-, or Nomex-certified driver gloves when fire-resistant equipment is required. How should the Sparco Meca 3 Gloves fit?They should fit closely around the palm and fingers without restricting movement. A snug fit improves tool control and reduces excess material around the fingertips. How should the gloves be cleaned?Gently clean them with mild soap and cool water, then allow them to air dry. Avoid bleach, harsh chemicals, machine drying, and direct high heat.