all

Arai GP-7 SA2020 Helmet A driver favorite, the Arai GP-7 SA2020 helmet combines the most popular Arai features with new, improved upgrades. The Arai GP-7 is constructed with Arai’s own PBcLc (Peripherally Belted Complex Laminate) shell construction and the same shell shape as the Formula One-grade GP-7SRC model. New ventilation, a soft EPS liner, and a wider eye port for optimized peripheral vision are part of this new shell which gives the driver notable strength and flexibility. Replaceable cheek pads make racing comfortable for any driver, as do the three larger, closeable intake vents and two larger exhaust vents on the ventilation system. The Arai GP-7 helmet is Snell SA2020 certified with factory-installed M6 washers/nuts. Drivers of any skill level can install their own Head and Neck Restraint system using a 6mm bolt. The FIA-8859-2015 certification sticker is applied to the interior liner of the helmet. THE ARAI GP-7 AUTO RACING HELMET POSITIVE SHIELD LATCH Simple yet effective, the positive latch mechanism on the Arai GP-7 SA2020 helmet gives the driver solid shield latching, but is seamlessly integrated into the standard shield system for ease of use. NEW SHIELD PIVOT HARDWARE FOR THE ARAI GP-7 HELMET The Arai GP-7 SA2020 features new shield pivot hardware with improved aerodynamics based on the updated track slider design. An increased peripheral field of view is featured on the 6 series, which surpasses the 5 series in visibility. The wider eye port, shield, and pivot hardware were all developed on the RC and adapted to the Arai GP-7 SA2020 helmet. Additional Arai GP-7 shields in various tints and colors available here. ARAI GP-7 AUTO RACING HELMET VENTILATION Increased airflow is key to the GP-7 SA2020 helmet’s design. This includes bigger, closeable intake vents with large 10mm holes in both front and rear. Larger rear vents also provide better airflow. M6 ANCHORS FOR THE ARAI GP-7 HELMET Drivers of all skill levels will appreciate the integrated, pre-installed M6 threaded washer/nut with 6mm threads which accepts a range of Head and Neck Restraint devices. A flat surface area around the mounting nut will let the anchor post base to rest flush along the surface of the helmet and around the full perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material. NEW CHINBAR FOR THE ARAI GP-7 The Arai GP-7 SA2020’s new, ergonomic chinbar and ridge at the bottom edge of the shell lowers the center of gravity and increases the structural integrity of the helmet. Additional improvements include a rise in the shell above the shoulders for increased clearance. EJECT READY CROWN PAD OF THE ARAI GP-7 HELMET Arai's optional Eject system can be easily accommodated via a pre-cut pocket under the helmet’s crown pad. ARAI GP-7 HELMET SIZES XS (54cm) - L (60cm) ARAI GP-7 HELMET COLORS Gloss White and Matte Black Be sure to check out the Competition Motorsport Performance Racing Helmet Bag to keep your new Arai GP-7 safe and secure throughout each race weekend. The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

OMP ONE Nomex Balaclava FIA 8856-2018 HOMOLOGATED The Top level balaclava made with comfortable fire retardant seamless fabric that ensures the best comfort. Two later seams on top for the best fitting. Two sizes available.OMP One Series of fire-retardant underwear is designed to work together with OMP's Dry System fire suits (the ONE and Tecnica Evo lines) to allow for maximum cooling regardless of the heat. The ONE Nomex balaclava's slim-cut design allows for a smooth, comfortable fit under your helmet, improving moisture wicking to keep your head cool and dry. his open face balaclava features ultra-flat seams for ultimate comfort even on long stints. Made from soft-knitted advanced technology fabric for high breathability and an anatomic shape for an excellent fit. Available in both regular and small sizes (perfect for kids). OMP ONE EVO BALACLAVA FEATURES FIA 8856-2018 Homologation Open face ultra-light balaclava Anatomic shape for increased comfort Ultra-flat, anti-rubbing seams mean fewer pressure points inside your helmet OMP Dry System 3D breathable material in the face for a real cooling effect

Sparco Track Set Seat Slider The Sparco Track Set, more commonly known as seat sliders, are recommended for any seat application1. This seat track set allows you to adjust your seat position fore and aft for a customized, comfortable cockpit. Sparco seat tracks employ a double locking mechanism for increased safety. 1 Note: seat sliders not intended for racing or competition use. Sparco Track Set Seat Slider Details Manufacturer: Sparco Manufacturer part no.: 00493 Double locking mechanism for increased safety Seat tracks are not intended for race applications

Sparco Dry-Tech Helmet Bag with Dryer The Sparco Dry-Tech Helmet & HANS Bag w/ Dryer is designed to keep your helmet dry and protected1. The Dry-Tech is a unique built-in drying system with a 12V fan and ventilation holes. The 12V fan is powered by a USB cord, so any powered USB adapter up to 12V will work (e.g., a phone or tablet chargers). The Sparco Dry-Tech Helmet Bag is constructed from 600D polyester with neoprene and synthetic leather inserts. It can even accommodate a helmet with a HANS device still attached. For transport convenience, the Sparco Dry-Tech Helmet Bag features two carrying handles and a shoulder strap. Sparco Dry-Tech Helmet Bag with Dryer Details Manufacturer: Sparco Manufacturer part no.: 016441NRSI Built-in drying system (USB 12V power) with cover Ventilation holes for passive drying/breathability HANS device compatible Zippered expansion for increased capacity Two carry handles and shoulder strap 1 Note: helmet and HANS device (shown) are sold separately.

Sparco 600 Series Seat Mounting Base Fitment for a Wide Range of Cars and Trucks Sparco 600 Series seat bases utilize the factory seat mounts on your car's or truck's floor to give you a strong, flat mounting surface for your Sparco racing seat. Sparco 600 Series seat bases are vehicle specific for an easy, bolt-in installation. The 600 Series Sparco racing seat base is constructed with 3/16" steel providing a strong, flex-free mount. Sparco 600 Series racing seat mounting bases are powder coated in a black wrinkle finish for a clean look. In addition to the mounting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform for custom installation of side mounts directly to the base (drilling required). Direct installation is handy in race vehicles where the lowest seat position is desired. Note: We carry Sparco 600 Series seat mounting bases for dozens of popular fitments in stock. For less-common fitments, it may take up to 10 business days for your mounting base to ship. Photos are of various Sparco 600 Series Mounting Bases. Your seat mounting base may differ. Sparco Seat Mounting 600 Series Base Details: Manufacturer: Sparco Manufacturer part no.: 600SB Construction: 3/16" steel Finish: wrinkle-finish black powder coating Outer mounting holes for wide side-mount racing seats Mounting surface allows direct installation of side mounts (some drilling may be required) Proper Installation of Your Sparco Racing Seat Requires: (1) Sparco 600 Series Seat Mounting Base (1) Set of two side mount brackets (steel or aluminum) (1) Side mounting hardware kit (50002) Optional (1) Track Set Seat Slider (00493)1 1 The Track Set Seat Slider allows for forward and aft seat adjustment. It is not SFI or FIA certified. Check with your sanctioning body before installing. Sparco 600 Series Seat Mounting Base Part Numbers Copy the SKU from the chart below and paste it into the "Input Part Number" field above when adding to cart.

Sparco Pit Stop Crew Shoes The Sparco Pit Stop Crew Shoes are purpose-built for pit crews, mechanics, track workers, and racers who need durable footwear with greater cushioning and protection than a traditional thin-soled racing shoe. Their supportive high-top construction, reinforced wear areas, and high-grip rubber outsole make them well suited for fast-paced pit-lane work, off-road racing, and other demanding motorsports environments. The upper combines soft suede with durable leather reinforcement panels around the toe box and heel. Perforated sections in the tongue and heel promote airflow, while the padded collar and anatomical insole provide the support needed for long days in the garage, paddock, or pit lane. An internal lacing system helps keep the laces contained and protected from snagging on tools, vehicle components, or equipment. A wide adjustable hook-and-loop ankle strap adds stability and helps maintain a secure fit during quick movements and physically demanding work. Designed for Pit Crew and Over-the-Wall Use The Sparco Pit Stop was specifically developed for motorsports crew members who need secure footing, ankle support, and added protection while working around race vehicles. Its durable construction is suitable for tire changes, fueling support, mechanical work, vehicle recovery, and other trackside responsibilities. Durable Suede Upper The upper is constructed from suede for a comfortable balance of flexibility, support, and abrasion resistance. The material allows the shoe to move naturally with the foot while maintaining the durability needed for regular motorsports use. Reinforced Leather Toe and Heel Panels Leather panels reinforce the toe box and heel, two areas that commonly experience wear during kneeling, walking, climbing, and working around vehicles. The reinforced construction improves durability and provides additional protection against contact with tools and equipment. Protective Toe-Cap Design The rubber sole extends upward around the front of the shoe to create a protective toe cap. This raised section helps shield the toe area when kneeling beside the vehicle or working close to wheels, jacks, bodywork, and other pit equipment. Breathable Perforated Construction Perforations in the tongue and heel encourage airflow around the foot. This targeted ventilation helps reduce heat buildup during long track days, warm-weather events, and extended periods of physical activity. Internal Lacing System The internal laces provide an adjustable fit while keeping most of the closure system protected beneath the upper. Containing the laces helps reduce the chance of snagging while moving quickly or working in confined areas around the race car. Padded Collar and Adjustable Ankle Strap Extra padding around the collar supports the ankle and improves comfort. A wide hook-and-loop strap allows the upper fit to be adjusted and helps stabilize the foot during quick movements, lifting, kneeling, and mechanical work. Pre-Shaped Anatomical Insole A pre-shaped cushioned insole supports the natural contours of the foot and helps distribute pressure more evenly. The added cushioning reduces fatigue during long periods of standing, walking, or working throughout the paddock. High-Grip Rubber Outsole The thicker rubber outsole is designed to provide dependable traction on pit-lane, garage, paddock, and off-road surfaces. Its durable construction offers more cushioning and walking support than the ultra-thin soles typically used on conventional driver racing shoes. Anti-Static and Fluid-Resistant Sole The outsole features anti-static properties and is resistant to fuel and oil. These characteristics make the Pit Stop Crew Shoes suitable for professional motorsports environments where contact with automotive fluids and equipment is common. Sparco Pit Stop Crew Shoe Features Designed specifically for pit crew and over-the-wall use Suitable for off-road racing and applications requiring a thicker sole Durable suede upper construction Leather reinforcement panels at the toe box and heel Protective raised rubber toe cap Perforated tongue and heel for improved airflow Internal lacing system helps reduce snagging Wide adjustable hook-and-loop ankle strap Extra-padded collar for ankle support Pre-shaped anatomical cushioned insole Thick, high-grip rubber outsole Anti-static sole construction Fuel-resistant outsole Oil-resistant outsole SFI 3.3/5 approved Available in black Available in US sizes 7.5–15 Technical Specifications Product: Sparco Pit Stop Crew Shoes Manufacturer: Sparco Product Type: Pit crew, mechanic, and motorsports work shoes Upper Material: Suede with leather reinforcement panels Ventilation: Perforated tongue and heel Closure: Internal laces with adjustable hook-and-loop ankle strap Collar: Extra-padded supportive construction Insole: Pre-shaped anatomical cushioned footbed Toe Protection: Raised rubber toe-cap design Outsole: Thick, high-grip rubber Sole Properties: Anti-static, fuel resistant, and oil resistant Certification: SFI 3.3/5 Color: Black US Sizes: 7.5–15 Sparco Pit Stop Crew Shoes Sizing Chart Frequently Asked Questions Are the Sparco Pit Stop Crew Shoes SFI approved? Yes. The Sparco Pit Stop Crew Shoes are approved to the SFI 3.3/5 standard. Drivers and crew members should verify the current footwear requirements for their racing organization, team, and event. Who are the Sparco Pit Stop Crew Shoes designed for? They are designed for over-the-wall pit crews, mechanics, track workers, off-road racers, and motorsports professionals who need durable footwear with added cushioning, grip, and protection. Can the Sparco Pit Stop Shoes be used for driving? Yes. They can be used for racing applications where a thicker and more durable sole is preferred. However, drivers wanting the thinnest possible sole and maximum pedal sensitivity may prefer a dedicated lightweight racing shoe. Are the Sparco Pit Stop Shoes suitable for off-road racing? Yes. Their thicker outsole, reinforced construction, ankle support, and protective toe design make them a strong option for off-road racing and other applications involving rough or uneven surfaces. What is the benefit of the internal lacing system? The internal laces help keep the closure system contained and reduce the risk of snagging on tools, bodywork, suspension parts, or other equipment. What does the ankle strap do? The adjustable hook-and-loop ankle strap stabilizes the upper foot and ankle. It also helps keep the shoe securely positioned during running, kneeling, lifting, and rapid pit-lane movements. Do the Sparco Pit Stop Shoes provide toe protection? Yes. Leather reinforcement protects the toe box, while the rubber outsole wraps upward to create a protective toe cap for added coverage when kneeling or working close to the vehicle. Are the Sparco Pit Stop Shoes breathable? Yes. Perforated sections in the tongue and heel help circulate air around the foot and reduce heat buildup during long or physically demanding events. Are the soles resistant to fuel and oil? Yes. The rubber outsole is resistant to fuel and oil and also includes anti-static properties for professional motorsports environments. Are these shoes comfortable for long track days? Yes. The padded collar, pre-shaped anatomical insole, thicker outsole, and supportive high-top design provide greater walking and standing comfort than many traditional thin-soled racing shoes. How should Sparco Pit Stop Crew Shoes fit? The shoes should fit securely without painful pressure points or restricted circulation. The heel should remain stable, and the ankle strap should provide support without limiting natural movement. How should the Sparco Pit Stop Crew Shoes be cleaned? Allow the shoes to air dry naturally after use. Remove dirt with a soft suede brush or damp cloth, keep them away from direct heat, and use cleaning products intended for suede and leather materials. Durable Protection for the Pit Lane and Beyond The Sparco Pit Stop Crew Shoes combine durable suede, reinforced leather panels, a protective toe cap, internal laces, and a supportive ankle strap. Their cushioned insole and thick fluid-resistant outsole make them a dependable choice for pit crews, mechanics, off-road racers, and motorsports professionals who need all-day comfort and SFI-approved protection.

AiM Sports Solo2 DL Data Logging Lap Timer The Premier Data-Logging & GPS Lap Timer For Motorsports Enthusiasts The AiM Solo2 DL receives data from two satellite constellations, GPS and Glonass; this is a huge step forward since it is unbelievably faster and more precise than the previous version. Power-on requires only a few seconds and lap times are calculated within a 0.02-second tolerance thanks to 10Hz (ten times per second) GPS sampling. A sleek, newly-designed case with easier-to-use metal buttons add a premium look and feel to the world's most popular data-logger and GPS lap timer. The screen can be back-lighted in one of seven colors! The AiM Solo2 DL With An ECU Connection Solo2 DL -- the Solo with an ECU connection -- has over a thousand ECU protocols in its database. Easily connect your Solo2 DL to your ECU and get reams information with just one cable. In case your ECU protocol isn't in the database, no problem: an ECU Driver Builder is available in the included Race Studio 3 software, allowing you to create your protocol yourself. This gives you access to a huge amount of data from your car that can be overlaid with GPS data to create an incredibly powerful analysis and learning tool! Choose your ECU Cable: OBD2: the standard vehicle diagnostic port beneath your dash supplies the Solo2 DL with a wealth of information. This is the standard cable most people will use. CAN/RS232: the Solo2 DL can be connected to your CAN Bus for an even richer, broader spectrum of information than OBD2. This cable can require a bit more know-how to connect, however. Coil RPM: the Solo2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V each signal) or pulse signals (150-450 V ignition coil trigger – primary circuit).  Find Your Race Track Quickly and Easily Solo2 DL has access to a database of more than 3,000 tracks all over the world! As soon as it switches on, the Solo2 DL identifies its position, recognizes the starting line coordinates of the track, and is ready to start sampling lap times. If your track isn't in the database, no problem: the Solo2 DL will automatically enter into autolearning mode, figures out the characteristics of the track, and starts lap-timing anyway. Predictive Lap Time LEDs The new Solo2 DL's predictive lap time engine is now even more reliable. And with configurable RGB LEDs, it will give you a clear, fast indication of how your current lap compares with your best possible lap. That's functionality you typically find only on expensive driver-coaching electronic aids; now it's at your fingertips with the Solo2 DL! Race Mode Selection The AiM Solo2 DL can manage different types of races, such as the following: Speed races in a closed circuit Point to-point races Regularity Performance tests (0-100 km/h etc.) In each of these configurations, the Solo2 DL gives the relevant information during the race/test along with powerful data review immediately after each session. WiFi & iPhone Connectivity WiFi communication with your laptop is easy, fast, and with no connectors or cables. It's the best way to configure your Solo2 DL, manage the track database, and download lap data to your PC. Connect your Solo2 DL to your iPhone for quick and easy data analysis, managing your track database, etc. Post-Race Data Analysis With RaceStudio 3 After downloading on-track data gathered by the AiM Solo2 DL to your laptop, you can easily analyze that data in AiM's amazing RaceStudio 3 software. Compare laps, lines, driver and car performance parameters, and much more to learn where you can trim tenths and outrun your competition! AiM SmartyCam Data Integration AiM gives your SmartyCam the perfect connection: the Solo2 DL takes data from your ECU, merges it with GPS lap information, and transmits everything seamlessly to your AiM SmartyCam. The resulting video includes your ECU and lap data in a graphical overlay! Feel free to give us a call at (844) 438-7244 to discuss the cool new features and capabilities of AiM's latest, greatest compact data-logger/lap timer today!

Alpinestars Tech-1 K v2 Karting Shoes The Alpinestars Tech-1 K v2 Karting Shoes are engineered for drivers who want durable protection, a secure anatomical fit, and precise feedback through the brake and throttle pedals. Developed specifically for the demands of kart racing, the Tech-1 K v2 combines a supportive nubuck microfiber upper with lightweight ventilation and an ultra-thin Formula 1-inspired outsole. An improved anatomical profile creates a flatter forefoot and a more natural fit around the foot. This streamlined design reduces unnecessary bulk around closely spaced kart pedals while helping the driver maintain accurate control during braking, acceleration, and rapid pedal transitions. The dual asymmetric closure system combines aramidic speed lacing with a low-profile hook-and-loop strap. This arrangement distributes pressure more evenly across the foot and allows the fit to be adjusted for dependable support throughout practice, qualifying, and racing. Durable Nubuck Microfiber Upper The Tech-1 K v2 uses an advanced hybrid upper constructed from durable nubuck and microfiber materials. The supportive structure is designed to withstand repeated karting use while remaining lightweight and flexible. Strategically positioned perforated zones improve airflow through the shoe, helping reduce heat buildup during long indoor sessions and warm outdoor race weekends. Enhanced Anatomical Fit The revised anatomical design improves the shape of the forefoot and allows the shoe to sit more naturally around the driver’s foot. A flatter toe area helps reduce excess material and improves contact with closely positioned pedals. This close-fitting profile supports accurate pedal movement without creating unnecessary pressure around the toes or midfoot. Dual Asymmetric Closure System The asymmetric closure follows the natural shape of the foot rather than applying pressure directly down the center. Aramidic speed laces run through durable para-aramidic eyelets to provide a secure and personalized fit. An ultra-thin hook-and-loop ankle strap adds support while maintaining a low profile inside the kart. Ergonomic Heel Counter Alpinestars’ polypropylene foot counter supports the heel and helps maintain stability during aggressive braking. The ergonomic construction limits unwanted rear-foot movement while allowing the ankle to move naturally. External Toe Reinforcement Reinforcement on both sides of the toe improves abrasion resistance and protection in areas commonly exposed to pedals, chassis components, and repeated contact inside the kart. External Rear Heel Protection A protective rubber section at the rear of the heel helps resist abrasion and impact while entering the kart, operating the pedals, and walking through the paddock. Ultra-Thin Formula 1 Specification Sole The Tech-1 K v2 features an ultra-thin outsole developed using Alpinestars Formula 1 footwear technology. Its exclusive rubber compound is strategically ribbed to provide grip and sensitivity through the pedals. The rounded heel supports smooth movement between the brake and throttle, while the specialized tread provides dependable grip in both wet and dry conditions. Comfortable Low-Cut Collar The soft microfiber collar is cut lower around the rear of the ankle to reduce pressure against the Achilles area. This construction improves comfort and range of motion during repeated pedal operation. Nitrile Rubber Collar Padding Lightweight nitrile rubber padding provides support around the ankle without adding excessive bulk. The material helps maintain comfort during long karting sessions while preserving the shoe’s streamlined profile. Perforated Padded Tongue The soft padded tongue uses perforations to improve ventilation and comfort across the top of the foot. Its flexible construction works with the asymmetric closure to create an even, secure fit. Alpinestars Tech-1 K v2 Karting Shoe Features Designed specifically for indoor and outdoor kart racing Durable nubuck and microfiber hybrid upper Strategically positioned perforated ventilation zones Enhanced anatomical foot profile Flatter forefoot for improved pedal control Dual asymmetric closure system Aramidic speed lacing Durable para-aramidic lace eyelets Ultra-thin hook-and-loop ankle strap Ergonomic polypropylene heel counter External toe reinforcement on both sides External rear heel rubber protection Soft microfiber low-cut rear collar Lightweight nitrile rubber collar padding Perforated padded tongue Ultra-thin Formula 1 specification outsole Strategically ribbed rubber tread Responsive pedal feel and sensitivity Grip in wet and dry conditions Technical Specifications Product: Alpinestars Tech-1 K v2 Karting Shoes Manufacturer: Alpinestars Product Type: Kart racing shoes Upper: Nubuck and microfiber hybrid construction Ventilation: Strategically positioned perforated zones Closure: Aramidic speed laces with low-profile hook-and-loop strap Eyelets: Para-aramidic construction Heel Support: Ergonomic polypropylene foot counter Toe Protection: External reinforcement on both sides Heel Protection: External abrasion-resistant rubber reinforcement Collar: Soft microfiber with nitrile rubber padding Tongue: Perforated soft padding Outsole: Ultra-thin Formula 1 specification rubber sole Recommended Use: Indoor and outdoor kart racing Alpinestars Tech-1 K v2 Karting Shoe Size Chart Frequently Asked Questions What type of racing are the Alpinestars Tech-1 K v2 shoes designed for? The Tech-1 K v2 is designed specifically for kart racing, including indoor leagues, outdoor competition, practice sessions, and club-level events. Do the Tech-1 K v2 shoes provide good pedal feel? Yes. Their ultra-thin Formula 1 specification outsole is designed to provide direct brake and throttle feedback while maintaining dependable grip. What is the benefit of the asymmetric closure? The asymmetric design follows the natural shape of the foot and distributes pressure more evenly than a traditional centered lacing system. This helps create a supportive and personalized fit. Are the Alpinestars Tech-1 K v2 shoes breathable? Yes. Perforated sections in the upper and tongue improve airflow and help reduce heat buildup during longer karting sessions. What does the polypropylene heel counter do? The ergonomic heel counter supports and stabilizes the rear of the foot during braking and quick pedal transitions while helping limit unwanted heel movement. Are the toe and heel reinforced? Yes. External reinforcement protects both sides of the toe, while an abrasion-resistant rubber section protects the rear heel area. Are the Tech-1 K v2 shoes comfortable around the Achilles area? Yes. The rear collar is cut lower and uses soft microfiber to improve Achilles comfort and allow a greater range of ankle movement. Can the Tech-1 K v2 be used for indoor karting? Yes. The breathable construction, secure fit, and responsive outsole make the Tech-1 K v2 suitable for indoor and outdoor kart racing. Are these shoes fire-resistant? The Tech-1 K v2 is designed for kart racing and should not be used as a substitute for fire-resistant auto racing footwear. Drivers should use shoes approved to the standard required by their sanctioning organization. How should the Alpinestars Tech-1 K v2 fit? The shoes should fit snugly around the heel and midfoot without painful pressure points. Leave a small amount of space around the longest toe while wearing the socks normally used for racing. How should the Tech-1 K v2 Karting Shoes be cleaned? Clean the exterior with a soft damp cloth and mild soap, then allow the shoes to air dry naturally. Do not machine wash, fully submerge, or place them near direct heat. Durable Karting Support with Formula 1 Pedal Feel The Alpinestars Tech-1 K v2 Karting Shoes combine a durable ventilated upper, anatomical support, reinforced protection, and an ultra-thin Formula 1 specification outsole. Their secure asymmetric closure and responsive construction make them an excellent choice for kart racers seeking comfort, stability, and precise control.

Sabelt Racing Tow Straps Performance That Keeps You in the Race Sabelt's Racing Tow Strap is simple and straightforward to install, available in multiple colors to complement any vehicle, and makes sure you can always get pulled out of trouble if/when the time comes! Key Features: Precision Engineering: Designed with the racer’s mindset for maximum performance and safety. Lightweight Strength: Every gram saved matters when you’re chasing lap times and podiums. Built for Competition: Meets the standards serious racers demand on and off the track. Specifications: Length: 10 7/8 in. (276 mm) Mounting hole: 15 mm diameter High-performance materials Track-tested durability Optimized for professional motorsports Sabelt Racing Tow Strap FAQs: Is this product certified for racing use?Yes, it meets all relevant racing standards for its category. Can it be used for street or track only?This product is specifically optimized for track and race environments. How does it compare to similar products?Designed for maximum performance, it offers superior durability and functionality over typical alternatives. Why Buy From Competition Motorsport? We live racing. That means offering only track-proven gear, expert advice, and fast shipping so you’re never left waiting in the paddock. Let’s get you dialed in for success.

Sparco EVO QRT Racing Seats As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the  Sparco Evo QRT. Starting with the shoulder bolsters, Sparco trimmed down the width to help them fit into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo QRT fits perfectly in a Miata!), the Sparco Evo QRT is sure be a mainstay at the track! The Sparco EVO QRT series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. Available in cloth or vinyl. The Sparco EVO QRT is FIA approved. Sparco EVO QRT Racing Seat Sizes The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO S – Small (up to 32” waist) EVO – Medium (up to 34” waist) EVO L – Large (up to 36” waist) EVO XL – Extra Large (38” waist) What Is Sparco QRT Technology? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco EVO QRT Racing Seat Features QRT ultra-light fiberglass composite shell Excellent fitment into small cockpits Four Sizes: Small through XL Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA 8855-1999 approved Dimensions EVO S Dimensions: EVO Dimensions: EVO L / XL Dimensions:

CMS Performance Bolt-In Roll Bar for Porsche 911 (991 Gen) This Roll Bar Fits The Following Cars: 991.1 Porsche GT3 (2014-2016) 991.2 Porsche GT3 (2018-2019) 991.1 Porsche GT3RS (2015-2016) 991.2 Porsche GT3RS (2018-2019) 991.2 Porsche GT2RS (2018-2019) 991 (all) Porsche Carrera/Turbo w/ factory sunroof (2012-2019)1 The Best Roll Bar For The Iconic Porsche 991 The CMS Performance Porsche 991 Roll Bar is the strongest, safest, and highest quality bolt-in roll bar on the market for your 991 Carrera, GT2RS, GT3 or GT3RS, period. In designing and building the CMS Performance Roll Bar, safety and structural rigidity are our primary goals. That's why we fully TIG welded 1.75" Docol R8 Advanced High-Strength Steel tubing instead of the less-expensive but inferior 4130 CrMo others use. It's why we use the strongest chassis mounting points and cross-brace the main hoop. Precision And Innovation Set CMS Performance Apart Click Here for Installation Instructions The CMS Performance Roll Bar for the Porsche 991 is designed to locate your racing harness shoulder straps at precisely the right angle (0° to -20° front-to-back) and distance (as close as possible, not more than eight inches) to the driver and passenger, regardless of your seat position. Our use of high-tech Docol R8 tubing and main-hoop cross bracing gives you an unobstructed rear view without the need for more extensive braces that roll bars made of Chromoly or mild steel have to use. CMS Performance designed the rear kickers of the Porsche 991 Roll Bar to bolt to the rear shock towers (same as the factory GT3 Cup roll cage). Using the strongest mounting points adds rigidity to the chassis and suspension to improve handling precision. The CMS Performance main roll hoop is mounted to the steel sub-structure beneath the vehicle just like the factory cage. Built Like A Tank, Finished Like A Porsche The CMS Performance Roll Bar for the Porsche 991 is fully TIG welded by master welders giving it unsurpassed structural integrity and a precision fit in the car. CMS Performance powder coats each roll bar in-house to ensure a premium finish. This allows us to offer a full range of powder coats color-matched to your Porsche's OEM color palette2. You can also get your roll bar powder coated in one of our custom technical finishes like the amazing Superchrome! Or, you can choose a rich satin black if stealth is more your thing. Every finish option is included in the price of the CMS Performance Roll Bar. Don't Settle For Anything Less Than The Best From CMS Superior engineering and design, premium materials, expert construction, and a beautiful custom finish at an affordable price. That's what sets CMS Performance apart from any other manufacturer. All backed by our legendary customer service, it adds up to this: you can certainly pay a lot more for a roll bar, but you can only get the best from CMS. Add Premium Harnesses to Complete Your Safety Upgrade Using the drop-downs above, you can add six-point Schroth Enduro 2x2 GT3, Schroth Flexi 2x2 GT3, or Sabelt Silver Series GT3 harnesses to your order for a truly comprehensive safety upgrade. Or add specially-engineered Schroth Profi II ASM GT3 or Sabelt Porsche GT3 four-point harnesses to your order for a simpler installation. Both six- and four-point harnesses are specially designed to bolt directly to your Porsche lightweight carbon bucket seats. (Some passenger seats do not have a factory sub-strap pass through.) When installing six-point harnesses in your Porsche, we strongly recommend adding the CMS Performance Sub Strap Mount to each seat. Custom designed to fit the Porsche lightweight carbon bucket seats, they provide solid, properly located anchors for your anti-submarine straps and are very easy to install alongside your CMS Performance roll bar. CMS Performance Porsche 991 Roll Bar Details Manufacturer: CMS Performance Manufacturer Part: CPRB-991 Material: Docol R8 Advanced High-Strength Steel, 1.75" O.D. Construction: Full-penetration 360o TIG welding, one-piece main hoop and three-piece kickers, CNC-cut precision mounting plates, CNC-machined steel interlocking clamps ease installation American-made Grade 8 hardware included Full seat travel with any seat Detailed installation instructions & all necessary hardware for a seamless installation 1 Be sure to select "Yes" under the Sunroof Version option above when ordering a roll bar for your 991 equipped with the factory sunroof. This version is slightly shorter than the non-sun roof roll bar. 2 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car. This product is intended for off-road race track use only.

Stilo Helmet Non-Adjustable Top Air Systems (Round or Aluminum Oval Intake) - Fits ST5 & ST6 Keep Your Stilo ST5 & ST6 Helmet Ventilated With The Stilo Top Air Kit Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This unique cooling system feeds air from your car’s fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 & ST6 helmet and does not require any drilling of the shell or modifications to the internal EPS foam. There are four small ventilation holes molded into the top of every ST5 helmet. Stilo's Top Air system fits over the forward two holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the rear holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. This Stilo Top Air System can be fitted to all Stilo ST5 & ST6 model helmets. It comes in two sizes to best fit your helmet: YA0834 Non-Adjustable oval for helmets XS (54cm) to L (59cm) YA0857 Non-Adjustable oval for helmets L+ (60cm) to XXXXL (64cm) YA0853 Non-Adjustable round for helmets XS (54cm) to L (59cm) YA0859 Non-Adjustable round for helmets L+ (60cm) to XXXXL (64cm)

Sparco RW-10 Seamless Nomex Balaclava The Sparco RW-10 line of Nomex undergarments is the lightest and most breathable on the market that is homologated to the new FIA 8856-2018 standard. When designing this new line of undergarments, Sparco studied the drivers seating position to ensure ultimate fit and comfort. The RW-10 features a fully seamless structure with ultra-soft stretchable material for a very comfortable fit. RW-10 shirts and underpants are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool treatment has an anti-bacterial effect. The RW-10 balaclava is seamless, designed with no seams across the mouth and chin area for comfort when wearing a helmet. The traditional center seam across the front of the forehead has been removed to lessen any chances of pressure when wearing a helmet. Sparco RW-10 Balaclava Technology Newest FIA rating: FIA 8856-2018 Seamless stretchable Nomex in key areas for mobility Designed for comfort in a driving position Minimal external seams increase driver comfort

Bell SRV-8 Replacement Helmet Shields Functional and Beautiful Tinted, Mirrored, or Amber Hi-Def The Bell SRV-8 is a 3mm injection-molded, optically correct polycarbonate face shield. The SRV-8 3mm shield uses the SRV-1 pivot kit (not included), is compatible with tear offs, and comes in a variety of tint colors and mirror finishes. You can order your SRV-8 shield with a Double Screen Anti Fog (DSAF) insert  to greatly improve fog control. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts (tear-offs sold separately). Bell SRV-8 Helmet Shield Tints and Finishes Blue Mirror Silver Mirror Gold Mirror Light Smoke Dark Smoke Amber Hi-Def Clear Bell SRV-8 Shields Fit the Following Helmets Bell Racing M.8 Bell Racing M.8 Carbon Bell Racing BR8 Bell Racing BR8 Carbon

OMP One Evo X Racing Shoes The OMP One Evo X Racing Shoes are premium competition shoes developed for drivers who demand excellent pedal sensitivity, lightweight comfort, and FIA-approved protection. The updated MY2024 design combines an ultrasoft leather upper with strategically placed fabric inserts for a close, flexible fit behind the wheel. A high-resistance, new-generation two-tone outsole provides dependable grip while maintaining the sensitivity needed for precise braking, throttle modulation, and clutch control. The low-profile structure helps the driver feel subtle pedal movements without adding unnecessary bulk inside the cockpit. Thin laces allow quick adjustment and smooth tightening, while the wide hook-and-loop ankle strap provides a secure fit. A flexible rear bellow supports natural ankle movement during braking, shifting, and rapid pedal transitions. Ultrasoft Leather Construction The OMP One Evo X uses an ultrasoft leather upper that conforms closely to the foot for increased comfort and control. Lightweight fabric inserts add flexibility and help reduce stiffness around key movement areas. Responsive Pedal Sensitivity The shoe’s structure is designed to improve the connection between the driver and the pedals. Its streamlined profile and thin outsole help provide accurate feedback when controlling brake pressure, throttle position, and clutch engagement. High-Grip Two-Tone Outsole A high-resistance, new-generation rubber outsole provides secure pedal grip and added protection around the foot. The two-tone sole combines durability with the flexibility required for precise pedal operation. Secure Lace and Ankle Closure Thin racing laces slide smoothly through the closure system for fast and accurate adjustment. A wide hook-and-loop ankle strap helps secure the foot, contain the laces, and maintain a stable fit while driving. Flexible Rear Bellow The rear bellow allows the ankle to move naturally while maintaining support around the heel. This flexible design improves comfort during long driving sessions and reduces restriction during pedal movement. OMP One Evo X Racing Shoe Features Premium FIA-approved auto racing shoes Updated MY2024 construction and styling Ultrasoft leather upper Lightweight fabric inserts Structure designed to increase pedal sensitivity High-resistance, new-generation two-tone outsole Low-profile design for precise pedal operation Thin racing laces for quick adjustment Wide hook-and-loop ankle strap Flexible rear bellow for freedom of movement FIA 8856-2018 homologated Technical Specifications Product: OMP One Evo X Racing Shoes Model Year: MY2024 Part Number: IC0-0833-A01 Upper Material: Ultrasoft leather with fabric inserts Outsole: High-resistance two-tone rubber Closure: Thin laces with hook-and-loop ankle strap Rear Construction: Flexible ankle bellow Certification: FIA 8856-2018 Sizes: EU 36–48 Colors: Black, White, Red, Fluorescent Yellow, and Navy Blue/Cyan OMP One Evo X Racing Shoes Sizing Chart Frequently Asked Questions Are the OMP One Evo X Racing Shoes FIA approved? Yes. The OMP One Evo X Racing Shoes are homologated to the FIA 8856-2018 standard. Drivers should confirm the current footwear requirements for their racing organization and class. What materials are used in the OMP One Evo X? The upper is made from ultrasoft leather with lightweight fabric inserts. This construction provides a close, flexible fit while maintaining the support needed for competitive driving. How do the OMP One Evo X Racing Shoes fit? The One Evo X has a close, performance-oriented fit. The thin laces allow precise adjustment, while the wide ankle strap helps secure the heel and upper foot. Do the OMP One Evo X Racing Shoes provide good pedal feel? Yes. The low-profile structure and thin outsole are designed to increase pedal sensitivity, helping the driver feel changes in braking pressure, throttle position, and clutch engagement. What does the rear bellow do? The flexible rear bellow allows the ankle to move more freely during pedal operation. It helps reduce restriction while maintaining support around the heel and ankle. Are the OMP One Evo X Racing Shoes suitable for HPDE events? Yes. Their secure fit, responsive sole, and lightweight construction make them suitable for professional competition, club racing, time trials, autocross, HPDE events, and track-day driving. Can these shoes be used for karting? They can be worn for karting, but the One Evo X is designed and certified as an auto racing shoe. Karting-specific footwear may provide an outsole better suited to walking through kart paddocks and pit areas. How should I care for the OMP One Evo X Racing Shoes? Allow the shoes to air dry naturally after use and keep them away from direct heat. Clean the leather with an appropriate leather-care product and avoid unnecessary walking on gravel, rough pavement, or other abrasive surfaces. Premium Comfort and Precise Pedal Control The OMP One Evo X Racing Shoes combine ultrasoft leather, a secure lace-and-strap closure, a flexible rear bellow, and a high-grip racing outsole. Their FIA-approved construction and responsive pedal feel make them an excellent choice for drivers competing in demanding motorsports environments.

Safecraft Restraint Systems Quick Release Kevlar Head Net *Picture shown with optional strap adapter.   The Safecraft Restraint Systems Quick-Release Kevlar Head Net adds driver security to your roll cage, preventing ejection in the event of a crash and helping keep the driver's head from impacting the roll cage (depending on orientation to the driver). The push-button quick release gets the net out of the way immediately for emergency egress or driver changes. Safecraft is a premium brand of racing safety equipment, run by racers with products designed and handcrafted in the USA by skilled craftsman. Some sanctioning organizations require a window net system for competition. SAFECRAFT RESTRAINT QUICK RELEASE KEVLAR HEAD NET FEATURES Choose SFI 37.1 or FIA 8863/2013 certification (+$45 for FIA)  Kevlar webbing Choose Left or Right side Measures: 15" tall (tallest vertical strap) by 26" long (tip to back of web), three 29" attachment straps Includes net and quick-release hardware Standard netting color is black