all

Sparco Grid Q Racing Seat The Sparco Grid Q is engineered for superior lateral support, driver ergonomics, and safety. Its modular padding system uses individual Velcro-attached pads to fine-tune fit and create natural ventilation channels across the seating surface. A new shell design adds deep side bolsters and supportive shoulders for excellent hold under high-G loads. Built with Sparco’s QRT (Quick Resin Technology), the Grid Q achieves an ultra-light fiberglass composite shell while maintaining outstanding strength. Side cushions can be removed for additional hip room, and the harness slots accommodate a wide range of driver sizes. The Grid Q is FIA approved and HANS compatible. Sparco QRT Technology QRT delivers an exceptional strength-to-weight ratio, reducing shell weight by up to 30% versus traditional fiberglass methods—approaching carbon fiber performance at a more accessible price point. Features QRT ultralight fiberglass composite shell Deep side and shoulder bolsters for lateral support Modular Velcro padding with ventilation channels Removable side cushion for wider fit Harness slots fit a broad range of drivers HANS device compatible Fire-retardant, self-extinguishing upholstery with non-slip zones FIA 8855-1999 approved Dimensions

Sabelt X-Pad Racing Seat The Sabelt X-Pad is the perfect seat for those racing Miatas, Corvettes and other cars with limited interior space who still demand the safety of a full-containment seat. The X-Pad is Sabelt’s most compact seat yet, specifically designed to fit in smaller cockpits where drivers want the additional security of a full-containment / halo seat. Sabelt has managed to do this while keeping the interior seat dimensions able to fit most average racing drivers. Sabelt has achieved the interior fit of the seat by replacing bulky seat padding with a significantly thinner, but still comfortable, foam padding. Exterior dimensions of the seat were reduced by changing key elements such as eliminating the "rolled" upper edges of the seat, which reduces the width significantly without narrowing the seat to the point where it would only fit small drivers. The Sabelt X-Pad is a prime example of how game-changing innovation can be discovered in plain-sight; it doesn't always require a shake-up to standard conventions. Sabelt X-Pad Racing Seat Features FIA 8855-1999 homologation. Weight: 19.3 lbs (8.75 kg). Standard side mounting. Perfect full-containment seat for small-cockpit cars (Miata, Corvette, etc.) Shoulders and hips designed for Regulation 8862 to improve driver safety. Rear structural reinforcement. Dimensions

AiM ACC3 Analog CAN Converter (replaces AiM Sports MyChron Expansion Channel Multiplier X80MYCEXP00) The AiM ACC3 Analog CAN Converter is your ticket to unlocking virtually endless expansion for your vehicle’s data acquisition system. Compact, rugged, and easy to integrate, the ACC3 adds up to four fully configurable analog channels—or a mix of two analog and two digital—without using or altering any existing system inputs. Whether you’re tracking temps, voltages, or speeds, this device gives you the freedom to connect the sensors you need for deeper insights. Expand Your Data Logging Capabilities Engineered for versatility, the AiM ACC3 works seamlessly with a wide range of sensors, from thermocouples to 0–12V signal devices. Just note that thermocouples require dedicated compensated cables, so AiM offers different kits and harnesses to match your setup. The result? More data, more accuracy, and better performance analysis at the track. Features and Specifications Analog channels: four fully configurable channels, 200 Hz each (Thermocouple, Thermoresistor, 0–5 volts, 0–12 volts)Speed inputs: two (AN3-AN4), max frequency 10 kHz, internal pull-up for open drain/collector inputExternal power: 9–15 VDCConnection: 1 Analog 8-pin Binder 712 + AiM CAN 5-pin Binder 712Material: PA6 30% glassDimensions: 44.0 x 38.0 x 19.8 mmWeight: 50 gWaterproof rating: IP65 FAQs Can the AiM ACC3 be used with MXL2, MXS, or MXG systems? No, it is not compatible with MXL2, MXS, and MXG models. What types of sensors can I connect? It can handle thermocouples, 0–5V, and 0–12V sensors, plus speed sensors on the designated channels. Do I need special cables for thermocouples? Yes, thermocouples require dedicated compensated cables to ensure accurate readings. Is it suitable for use in wet conditions? Yes, with an IP65 waterproof rating, it’s protected against dust and low-pressure water jets. Maximize your data acquisition potential with the AiM ACC3 Analog CAN Converter—designed for racers who demand more insight and precision from their telemetry systems.

AiM MXP Midsize Color Racing Dash 50% Bigger Display Than MXS in a Similar-Sized Package This brilliant dash logger from AiM features a stunning high-contrast color 6" TFT display, an integrated LED shift array, configurable multicolor LED alarms, drag and drop multi page configuration, Wi-Fi and USB connectivity, included GPS08 Module, inertial platform, analog and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections! That all adds up to an incredibly flexible, powerful, and useable information center at your fingertips in your race car. Wide Range of Data Sources The AiM MXP samples data coming from your ECU, the GPS Module, its internal nine-axis inertial platform (accelerometer, gyro and magnetometer), eight fully configurable analog inputs, six digital inputs, predefined math channels and a second CAN. Performance info and data acquired can be expanded by adding up to eight expansion modules. Multi-Configurable Pages You can define all the custom pages you wish, choosing from a wide library of page styles, defining which data to be shown, their end of scale and units of measure. Swapping between pages is as simple as pushing one or two buttons! Flexible Alarms and Icons The MXP features five configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one (and the flashing frequency), choose to have an accompanying text message, and set alarm priorities. You can also choose the street icons you need from a large list in Race Studio 3 - Icons Management, then set them up any way you prefer. They're all fully configurable, and if that's not enough, you can upload and set-up your own customized icons! Twin Digital Outputs MXP features two digital outputs. They can be configured to respond to the analog or digital inputs to automatically run external systems (e.g. to switch on/off additional lights, activate/de-activate a cooling fan or fluid circulation pumps, etc.) Dual Motorsports Camera Inputs Two analog camera inputs are available to swap your display into a mirror camera or rear-view camera through either push button command or in response to certain programmable events. Especially useful in a race car with limited visibility/sight lines. LED Shift Light Array Choose from a host of advanced multicolored RGB shift light patterns that can be customized as you like, including RPM settings for each individual gear. WiFi Connectivity It's so convenient to configure, calibrate, and download your data wirelessly using a secure 802.11 WiFi connection. No need to move your PC close to the vehicle anymore, you can do it  from your trailer or tow vehicle up to 60 yards away. AiM MXP Midsize Color TFT Dash/Data Logger Details Midsized 6" high-contrast color TFT display 800x480 pixel screen resolution 7.5" x 4.2" x 1.0" anodized aluminum housing Three CAN/RS232 connections 15 configurable RGB LEDs Weight 1.4 lbs (640g) 4GB internal memory Waterproof IP65 The AiM MXP Kit Includes: AiM MXP data-logger dash GPS09 Module with cable USB cable 37-pin Deutsch connector harness Installation CD with Race Studio 3 software

D1-154 Girodisc Porsche 410mm Front Replacement Rings Refresh your Porsche’s braking system with Girodisc D1-154 410mm front replacement rings. These precision-engineered rings bolt directly to your existing Girodisc aluminum hats using the included floating hardware kit. Each rotor ring is machined from Girodisc’s proprietary high-carbon cast iron, ensuring exceptional heat resistance, consistent friction, and fade-free braking through repeated track sessions or spirited road use. Vehicle Fitment Compatible with:• Porsche 991 GT3 / GT3 RS (2014–2019)• Porsche 991 Turbo / Turbo S (2014–2019)• Porsche 992 GT3 (Iron conversion applications)Note: Designed for Girodisc 410mm two-piece front rotor systems. Not compatible with OEM PCCB carbon-ceramic discs or one-piece factory iron rotors. Features • Sold as a left/right pair with complete floating hardware kit• Direct replacements for Girodisc 410mm two-piece front rotors• High-carbon iron construction provides excellent thermal stability and long wear life• Directional curved vanes increase airflow and cooling efficiency under sustained braking• Maintains factory brake bias, ABS, and stability control calibration• Precision-balanced for smooth and consistent performance• Designed exclusively for Girodisc aluminum hats used in Porsche iron-conversion kits Specifications • Diameter: 410 mm• Position: Front• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rotor rings and new hardware kit• Sold/priced per pair Girodisc D1-154 Porsche 410mm Front Replacement Ring FAQs Can these be used with OEM Porsche carbon-ceramic hardware? No. The D1-154 rings are specifically for Girodisc iron conversion hats and cannot mount to PCCB carbon-ceramic assemblies. What pad compounds work best with these rotors? For dual street/track use, Pagid RS29 or Ferodo DS1.11 are recommended. For daily use, choose low-dust compounds like Ferodo DS2500 or Hawk HPS 5.0. What torque should I apply to the hardware bolts? Torque each bolt to 12 ft-lbs (16 Nm) using blue Loctite. After one full heat cycle, verify all fasteners are secure. Are these rotors directional? Yes. Each rotor is marked for left or right installation. Follow the rotation arrows to ensure proper airflow through the curved vane structure for optimal cooling. Upgrade your Porsche’s braking confidence with Girodisc D1-154 410mm front replacement rings — precision-crafted for heat control, consistency, and race-proven performance lap after lap.

Sparco 6 Point 3" Competition Pull Down Aluminum Racing Harness (2030 Expiry) When you’re pushing the limits on track, your harness is your lifeline. The Sparco 6-Point Competition H-3 PD Racing Harness is engineered to keep you secure, focused, and in control through every braking zone and corner. The Sparco FIA H-3 Competition 6-Point Aluminum Racing Harness boasts 3" shoulder straps, 2" lap and sub belts, an aluminum camlock, and aluminum adjusters. The snap-in hardware and eyebolts included with the six mounting points facilitate a simple installation process. Its professional aircraft-style camlock buckle guarantees effortless belt engagement, while the steel adjusters allow for easy adjustments. Whether you're chasing tenths in time attack or racing wheel-to-wheel, this FIA-approved harness is built for serious performance and protection. Why Choose the Sparco Pull Down Aluminum Racing Harness? 6-Point Design: Helps keep the driver stable and secure under braking and cornering loads. 3" FHR Shoulder Straps: Designed for use with HANS and other FHR devices. 2" lap and sub strap belts Aluminum Buckle: Lightweight quick-release design for fast exit. Aluminum Adjusters: Durable hardware for a secure fit. Pull-Down Abdominal Adjusters: Easy tightening and adjustment. Snap Hooks and Compact T-Bar: Secure attachment and straightforward installation. Sparco Pull Down Aluminum Racing Harness Specifications Type: 6-Point Racing Harness Strap Width: 3" FHR-specific Material: High-strength webbing with aluminum and steel components Adjusters: High-resistance steel with pull-down abdominal adjustment Attachment: Snap hooks with compact T-bar FIA Certification: HOM. NO: SH.076.20-T-6 Sparco Pull Down Aluminum Racing Harness FAQs Is this harness FIA approved?Yes. It carries FIA HOM. NO: SH.076.20-T-6 certification for competition use. Can I use it with a HANS device?Yes. The 3-inch shoulder straps are designed for FHR compatibility. How does it install?The harness uses snap hooks for easy mounting. Reinforced eye-bolt anchors are recommended for custom installations. Is it suitable for endurance racing?Yes. The pull-down adjusters and compact T-bar help maintain comfort and alignment during long sessions. Lock In. Stay Safe. Drive Faster. The Sparco 6-Point Competition H-3 PD Racing Harness delivers FIA-approved protection, secure fitment, and race-ready confidence for serious drivers.

Sparco FIA Approved Racing Tow Strap When the unexpected happens, your Sparco tow strap gets you back in the game without skipping a beat. Performance That Moves You Forward Key Features: Precision Engineering: Designed with the racer’s mindset for maximum performance and safety. Lightweight Strength: Every gram saved matters when you’re chasing lap times and podiums. The Sparco Tow Strap is a lightweight fabric alternative to traditional steel tow hooks. It is rated for 6,600 lbs. maximum load. Built for Competition: Meets the standards serious racers demand on and off the track. Specifications: High-performance materials Track-tested durability Optimized for professional motorsports Tow Strap features a light weight fabric construction in high visibility red Tow Strap rated for 6,600 lbs. max pull FIA compliant Hole diameter: 15mm FAQs: Is this product certified for racing use?Yes, it is FIA approved and meets all relevant racing standards for its category. Can it be used for street or track only?This product is specifically optimized for track and race environments. How does it compare to similar products?Designed for maximum performance, it offers superior durability and functionality over typical alternatives. Why Buy from Competition Motorsport? We live racing. That means offering only track-proven gear, expert advice, and fast shipping so you’re never left waiting in the paddock. Let’s get you dialed in for success. Competition Motorsport sales@competitionmotorsport.com | 844-438-7244

Alpinestars Graphic 2 Engineered for precision and comfort in virtual racing The Alpinestars Graphic 2 Sim Racing Gloves are purpose-built for virtual racers demanding professional-grade control, precision, and comfort. Designed with feedback from top Sim drivers around the world, these gloves deliver the feel and responsiveness needed to perform at your peak during every session — whether you’re running an endurance race or perfecting lap times on your favorite circuit. Features Developed specifically for Sim racing with input from elite eSports and virtual racing professionals to meet the evolving demands of the Sim community. Lightweight, stretchable bonded textile construction provides maximum comfort, adaptability, and natural steering feedback during long sessions. Supremely soft Nanofront® palm fabric delivers exceptional tactile sensitivity, allowing precise throttle, brake, and steering inputs. Large perforations across the back of the hand, paired with smaller palm and finger perforations, promote optimal airflow and minimize sweat buildup. Elastic wrist cuff ensures a snug, secure fit while maintaining easy entry and removal. Bold printed graphics reflect Alpinestars’ racing heritage, combining professional aesthetics with advanced performance engineering. FAQs: Alpinestars Graphic 2 Are these gloves made for real racing or Sim use? These gloves are designed specifically for Sim racing, providing exceptional comfort, breathability, and control for long virtual racing sessions. Do they work with all Sim wheels and setups? Yes, the gloves are optimized for a wide range of steering wheels, including Alcantara, suede, and leather finishes. What makes the Nanofront® palm fabric special? The Nanofront® material offers superior grip, sensitivity, and feedback compared to traditional Sim gloves, improving fine control during driving. Are they breathable for long races? Absolutely. The perforated design ensures excellent ventilation, keeping your hands cool and comfortable even during endurance events. The Alpinestars Graphic 2 Sim Racing Gloves combine the brand’s motorsport DNA with next-generation materials, giving virtual racers the perfect blend of comfort, feedback, and control. Whether you're chasing podiums in iRacing or fine-tuning your technique in Assetto Corsa, these gloves deliver championship-level performance for your setup.

Sparco Martini Racing Tour Bag Race weekends should be about lap times, camaraderie, and fun...not luggage struggles. Enter the Sparco Martini Racing Tour Bag, the ultimate rolling duffel designed specifically for racers who need style, storage, and serious durability. Whether you're a weekend warrior or a seasoned pro, this Martini Racing edition delivers the legendary racing heritage you crave, plus all the compartments you need to keep your gear safe, organized, and track-ready. Why Choose the Sparco Martini Racing Tour Bag? Designed for Racers: A massive 127L capacity gives you room for everything—helmet, race suit, shoes, gloves, and even those last-minute track day snacks. Dedicated Helmet & Shoe Compartments: Because cramming your sweaty race gear into one pocket isn’t ideal.Reinforced for the Long Haul: Protective padding, quilted lining, and a reinforced under compartment keep your gear secure even when baggage handlers test its limits. Effortless Mobility: Reinforced wheels and a sturdy telescoping handle mean you can roll through paddocks, airports, and pit lanes like a pro. Secure & Organized: Double adjustable closure straps keep everything in place, while a front document pocket ensures your racing license and event paperwork are always within reach. Iconic Martini Racing Livery: Show off your love for motorsport history with the legendary Martini Racing colors—because fast gear deserves fast stripes. Sparco Martini Racing Tour Bag Details Manufacturer: Sparco Manufacturer part no.: 016437 Dimensions: H16" x L33" x W15" Capacity: 127 liters (4.5 cu. ft.) Weight: 10.3 lbs. (4.7 kg) Features: Dedicated helmet and shoe compartments Protective padding with quilting Reinforced wheels & telescoping handle Front document pocket Double adjustable closure straps Available in two colors: Black/Red or Black/Silver FAQs – Because We Know You’re Wondering… Q: Can this bag fit a full racing kit?A: Absolutely! The 127-liter capacity is designed to hold a helmet, suit, gloves, shoes, and more, with room to spare. Q: Is this bag carry-on size?A: Nope—this beast is made for serious gear hauling, so it’s best suited for checked baggage or throwing in the back of your tow rig. Q: Are the wheels durable enough for track life?A: Yes! The reinforced wheels and sturdy construction mean it can handle everything from smooth airport floors to paddock gravel. Q: Will the Martini Racing logos fade over time?A: Absolutely not. The high-quality materials and print used by Sparco ensure that those legendary stripes stay looking fresh for the long haul. Pack Like A Pro, Travel Like A Champion From the iconic Martini Racing design to the purpose-built racer-friendly compartments, the Sparco Martini Racing Tour Bag is the ultimate gear hauler for any serious driver. Whether you're heading to a local track day or an international race event, this bag ensures your gear arrives in style, safety, and total convenience. Don’t just show up—show off. Grab your Sparco Martini Racing Tour Bag today!

Sparco Six-Point Martini Pull Down Racing Harness 2" HANS Shoulder Belts with Aluminum Adjusters Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. Each strap attaches in the center using an aircraft-quality quick-release aluminum buckle with integrated anti-submarine belts. The lightweight aluminum adjusters allow for smooth, quick adjustments and perfect clamping. All belts attach to your car or seat mounts using clip-in fixtures. Sparco Martini Racing Harness Technology Pull-up lap belts Lightweight aluminum adjusters for smooth and quick tensioning FIA Approved Available in black, blue, or red.

Stand21 Porsche Motorsport Evo V3 Nomex Pants  Officially-licensed Porsche Motorsport safety gear from Stand21 is now available at Competition Motorsport. The Evo V3 nomex pants combine top-tier technologies in fire resistance and comfort to create a lightweight, breathable, and comfortable shirt designed specifically for the Porsche Motorsport enthusiast. Stand21 Porsche Motorsport Evo V3 Pants Details Manufacturer: Stand21 Manufacturer part no.: S21EvoV3-Pants FIA 8856-2000 homologated Aramid/viscose construction Sizes Small through XXL Soft and comfortable waistband Note: the Stand21 Porsche Motorsport Ev0 V3 Pants do not feature the "Porsche Motorsport" logo

AiM Sports MyChron6 Digital Data Logging Dash For Kart Racing Available now! The world's #1 racing go kart data logger just got even better. Get your hands on the latest innovation in karting data logging and analysis, the AiM MyChron6 Data Logger for racing go karts. The AiM MyChron6 is an advanced karting data logger, specifically designed for competitive kart racers looking to monitor, analyze, and enhance their performance. The MyChron6 features improved GPS technology (compared to MyChron 5) for precise lap timing. Its configurable display gives you real-time data logging that integrates seamlessly into AiM's famous Race Studio 3 software for data analysis and management. New In The AiM MyChron6 The MyChron6 now boasts an improved 20-hour battery life, doubling the 10-hour battery life of the MyChron 5. This allows for extended racing sessions without frequent recharges. Integrated Bluetooth for connection to smart watches to monitor heart and health vitals. Improved GPS accuracy with GPS09, further improving data collection The visual on-screen Delta Lap Timer function allows drivers to instantly view sector times and compare laps more effectively, helping refine racing lines and shave seconds off lap times. The MyChron6 features a larger screen measuring 150 x 79 x 36.6mm, compared to the MyChron 5’s 137 x 88 x 30mm display. This wider display allows for clearer data presentation and enables an exclusive on-screen delta bar animation, which provides real time graphical feedback comparing your current lap time to your best. The USB Type-C port ensures faster downloads and rapid charging, making data transfer between the device and your laptop, phone or tablet even more efficient. Introducing the MyChron6, a cutting-edge data logger engineered specifically for karting enthusiasts. Available now, this powerful device combines advanced sensor technology, rugged construction, and a user-friendly interface to give racers at every level the ultimate performance insights. Crystal-Clear Display & LED Alerts High-Resolution LCD: 320×136-pixel, 16-level grayscale display with 8 configurable RGB backlight colors for excellent visibility. Shift Lights & Alarm LEDs: Five customizable RGB shift lights plus two alert LEDs ensure you never miss critical information. Next-Generation Connectivity Wi-Fi & Bluetooth: Seamless data transfer, firmware updates, and configuration via wireless connection. Aux CAN Connection: Allows for easy integration of additional modules and sensors. USB Port: Convenient data download, mass storage support, and battery charging.Precision Timing & Track Mapping 25 Hz GPS: Highly accurate lap timing and real-time position tracking. Built-in track database recognizes circuits automatically. Digital Inputs/Outputs: Optical and magnetic lap signal inputs, plus one programmable output for high/low activation. Advanced Sensor Array Temperature Input: Monitor critical engine temperature for optimal tuning. Choose between cylinder head temperature (CHT), exhaust gas temperature (EGT), or water/coolant temperature. 6-Axis Inertial Platform: Captures acceleration and gyro data at 100 Hz for in-depth analysis of cornering, braking, and handling. Rugged, Expandable & Versatile External Module Support: Compatible with MyChron Expansion, IR Temperature Controller, SmartyCam 3 Series, and Lambda (LCU-One/LCU1S). 4 GB Onboard Memory: Ample storage for session logs and telemetry.Built to Last Rugged Body: PA6 GS30% composite construction for exceptional durability.IP67 Waterproof: Designed to withstand wet and dusty racing conditions. Compact & Lightweight: 150.0 × 79.0 × 36.6 mm, 370 g. Rechargeable Lithium Battery: Provides long-lasting power for extended track sessions.

Molecule Matte Helmet Detailer Specially formulated to keep the low luster of matte helmets intact and maintain a uniform flat finish. Product overview Features Cleans and details matte finish helmets in one easy step. Safely removes bugs, oils, dirt and grime. Specially formulated to keep the low luster of matte helmets intact and maintain a uniform flat finish. Cleans and details matte finish helmets in one easy step Safely removes bugs, oils, dirt and grime Apply and allow to dry .  

OMP KS-X Kart Racing Gloves The OMP KS-X Kart Racing Gloves are premium competition gloves developed for racers who demand precise steering feedback, dependable grip, and lasting comfort. Approved to the FIA 8877-2022 karting standard, the KS-X combines a lightweight stretch construction with external seams, pre-curved fingers, and strategically positioned silicone grip. Breathable mesh inserts help manage heat during demanding sessions, while the elasticated upper follows the shape of the hand for a close, responsive fit. The result is a high-performance kart glove designed to keep the driver connected to the steering wheel through rapid corrections, heavy steering loads, and extended races. Precision Grip for Competitive Karting Direct steering feedback is essential in kart racing, where every chassis movement is transmitted through the wheel. Silicone printing across the palm creates a secure contact surface that helps prevent unwanted hand movement during braking, cornering, and quick steering corrections. The low-profile grip pattern improves traction without placing a thick reinforcement layer between the driver and steering wheel. This helps preserve the detailed feedback needed to understand front-tire grip and chassis behavior. Pre-Curved Ergonomic Construction The KS-X uses a pre-curved shape that follows the natural position of the fingers around a kart steering wheel. This design reduces material bunching and minimizes the effort required to keep the hands closed during a race. By supporting a more natural hand position, the glove can help reduce fatigue and improve dexterity during long sessions, endurance events, and repeated on-track runs. External Seams for a Smoother Interior External finger seams move bulky stitching away from the inside of the glove. This creates a smoother contact surface around the fingers and helps reduce pressure points during extended use. The external-seam construction also allows the glove to fit more closely around the hand, improving sensitivity and reducing distractions while driving. Stretch Fabric Upper Elasticated stretch fabric across the upper glove conforms closely to the hand while allowing unrestricted movement. The flexible construction supports repeated steering inputs without creating unnecessary stiffness or resistance. Its close-fitting design helps prevent excess material from shifting around the fingers, allowing the driver to maintain consistent control throughout each session. Breathable Mesh Inserts Strategically positioned mesh panels improve airflow and help reduce heat buildup inside the glove. This added ventilation is especially beneficial during warm-weather events and physically demanding races. The breathable construction helps maintain comfort without compromising the glove’s close fit or steering-wheel sensitivity. Internal Anti-Slip Silicone Points Silicone points positioned inside the glove help reduce movement between the driver’s hand and the glove lining. This creates a more stable fit when perspiration increases during intense competition. Reducing internal slipping allows the glove and hand to move together more consistently, helping preserve steering accuracy and tactile response. Elasticated Wristband An elastic wristband keeps the KS-X securely positioned without requiring a bulky adjustment strap. The flexible opening allows quick entry while creating a snug fit around the wrist. This streamlined closure helps prevent the glove from shifting and keeps the driver focused on the track rather than readjusting equipment. FIA 8877-2022 Karting Approval The OMP KS-X is homologated to the FIA 8877-2022 standard for karting apparel. This approval makes it suitable for many national and international karting competitions requiring current FIA-compliant gloves. Drivers should confirm the exact equipment regulations of their championship, sanctioning organization, or event before competition. OMP KS-X Kart Racing Glove Features FIA 8877-2022 homologated for kart racing Lightweight elasticated stretch-fabric upper Pre-curved fingers support a natural steering position Silicone-printed palm improves steering-wheel traction Low-profile grip pattern preserves tactile feedback External finger seams reduce internal pressure points Breathable mesh inserts improve airflow Internal silicone points help prevent hand movement Elasticated wristband provides secure retention Close-fitting construction supports dexterity and control Suitable for indoor and outdoor kart competition OMP KS-X Kart Racing Glove Specifications Manufacturer: OMP Model: KS-X Product Type: Kart Racing Gloves Upper Material: Elasticated Stretch Fabric Palm: Silicone-Printed Grip Finger Construction: Pre-Curved with External Seams Ventilation: Breathable Mesh Inserts Internal Grip: Anti-Slip Silicone Points Wrist: Elasticated Wristband Homologation: FIA 8877-2022 Why Choose the OMP KS-X? The OMP KS-X is designed for drivers who want a more refined karting glove with improved grip, ventilation, and sensitivity. Its pre-curved shape supports a natural driving position, while the external seams and stretch upper create a close, comfortable fit. Silicone grip on the palm and anti-slip points inside the glove work together to keep the hand securely connected to the steering wheel. For serious racers seeking current FIA approval and professional-level control, the KS-X delivers a balanced combination of comfort, performance, and precision. OMP KS-X Kart Racing Gloves Size Chart Frequently Asked Questions Are the OMP KS-X Gloves FIA approved?Yes. The KS-X is homologated to the FIA 8877-2022 standard for karting apparel. What type of grip do the OMP KS-X Gloves use?The palms feature silicone printing that improves steering-wheel traction while maintaining precise feedback. Do the gloves have external seams?Yes. External finger seams move the stitching away from the inside of the glove, reducing pressure points and improving comfort. Are the fingers pre-curved?Yes. The pre-curved construction follows the natural shape of the hand around the steering wheel and helps reduce material bunching. Are the OMP KS-X Gloves breathable?Yes. Mesh inserts and lightweight stretch materials improve airflow and help manage heat during demanding sessions. What are the internal silicone points for?They help reduce movement between the driver’s hand and the inside of the glove, creating a more secure and responsive fit. Do the gloves have an adjustable wrist strap?No. An elasticated wristband keeps the gloves securely positioned without requiring a separate adjustment strap. Are the OMP KS-X Gloves suitable for outdoor karting?Yes. They are suitable for both indoor and outdoor kart racing, provided they meet the event’s equipment requirements. How do the KS-X Gloves compare with the OMP KS-2 or KS-3?The KS-X is positioned as a premium karting glove, with a greater focus on ergonomic shaping, external seams, ventilation, and precise silicone grip. How should the OMP KS-X Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excess material at the fingertips.

Arai GP-7SRC 8860-2018 Carbon Helmet The Arai GP-7SRC Carbon Racing Helmet is Arai's elite closed-cockpit auto racing helmet, engineered for drivers who demand an exceptionally lightweight carbon shell, advanced impact management, excellent airflow, and FIA 8860-level protection. Built around Arai's proprietary racing carbon fiber construction, the GP-7SRC combines high strength with controlled flexibility to help manage impact energy while keeping helmet size and weight to a minimum. Arai specifically developed the GP-7SRC for the demands of high-level closed-cockpit motorsport, and the helmet meets or exceeds the FIA 8860-2018 standard. FIA 8860-2018 Homologated The GP-7SRC is homologated to FIA 8860-2018, one of the highest-level helmet standards used in professional motorsport. This version is the standard GP-7SRC and should not be confused with the separate GP-7SRC ABP model, which adds Advanced Ballistic Protection certification. :contentReference Proprietary Racing Carbon Fiber Shell The defining feature of the GP-7SRC is its proprietary Arai carbon fiber shell. Rather than relying only on stiffness, Arai engineers the material and weave to provide exceptional strength along with a degree of flexibility intended to help manage impact energy. Multiple reinforcing materials are incorporated into the shell to increase performance while minimizing unnecessary weight and bulk. The result is a premium racing helmet designed specifically for drivers competing at the highest levels of closed-cockpit racing. :contentReference Arai Glancing-Off Shell Philosophy Arai's helmet design philosophy emphasizes a smooth, rounded shell that can help redirect energy by allowing the helmet to glance away from an obstacle rather than unnecessarily catching against it. On the GP-7SRC, the shield pivot hardware has been repositioned lower on the shell, increasing the smooth shell area above the eyeport. The pivot system uses a one-piece track slider with T20 Torx adjustment hardware. :contentReference Advanced GP-7 Ventilation The GP-7SRC uses three large closeable intake vents, larger 10mm ventilation openings, and two additional center exhaust vents to move more air through the helmet. A redesigned rear exhaust cowling helps hot air escape while also improving aerodynamic performance. This increased airflow is especially valuable during long sessions in enclosed race cars where cockpit temperatures can climb quickly. :contentReference Positive Shield Latch Arai's positive shield latch provides secure visor closure while still allowing normal shield operation. Rather than functioning as a separate add-on, the latch is engineered as an integrated component of the GP-7 shield system. :contentReference FCS Cheek Pads for a Secure Racing Fit The GP-7SRC uses sculpted FCS cheek pads designed to grip the driver's lower jaw more securely. This gives the helmet a more encapsulated feel and can help reduce unwanted movement and outside wind noise at speed. Replacement GP-7 cheek pads are also available in multiple thicknesses, allowing the interior fit to be fine-tuned when appropriate. :contentReferenceFHR and HANS Compatible The GP-7SRC incorporates factory-installed M6 threaded mounting provisions designed to accommodate compatible Head and Neck Restraint anchor systems. A flat mounting surface around each threaded location allows compatible anchor bases to sit flush against the helmet shell, simplifying installation of many HANS and other FHR systems. :contentReference Eject System Ready A pre-cut pocket beneath the crown pad allows the optional Eject helmet removal system to be installed without extensive modification to the interior.Drink Tube Compatible The GP-7SRC's center chin liner can be removed to simplify installation of a hydration tube. Arai provides four possible drink-hose placement locations, allowing the setup to be tailored to the driver's cockpit and preference. :contentReference Arai GP-7SRC Features FIA 8860-2018 homologation Arai proprietary racing carbon fiber shell Designed for high-level closed-cockpit motorsport Strong yet flexible carbon construction for impact-energy management Multiple shell reinforcing materials Three large closeable intake vents Larger 10mm ventilation openings Two additional center exhaust vents Redesigned aerodynamic exhaust cowling Arai positive shield latch Lower-position shield pivot system T20 Torx shield adjustment hardware Sculpted FCS cheek pads Integrated M6 FHR mounting provisions Eject system-ready crown pad Drink tube compatible Intermediate Oval interior fit Available in sizes X-Small through Large GP-7SRC vs. GP-7SRC ABP The GP-7SRC meets FIA 8860-2018 and is engineered primarily for elite closed-cockpit racing. The GP-7SRC ABP is a separate version that meets the FIA 8860-2018 ABP specification and adds the additional forehead intrusion protection associated with Advanced Ballistic Protection. If your series specifically requires ABP certification, choose the GP-7SRC ABP rather than the standard GP-7SRC.  GP-7 Shield Compatibility The GP-7SRC uses the Arai GP-7 shield family. Replacement shields are available in multiple configurations, including clear, tinted, mirrored, and anti-fog options. :contentReference Getting the Proper GP-7SRC Fit Arai lists the GP-7SRC in X-Small, Small, Medium, and Large with an Intermediate Oval interior fit. Proper helmet fit is critical to comfort and performance, and head circumference should be measured around the widest portion of the head before selecting a size.  A new helmet should fit firmly and evenly around the head without concentrated pressure points. Because head shape matters in addition to circumference, trying the helmet on is the best way to confirm proper fit. Arai GP-7SRC 8860-2018 Sizing Chart Questions & Answers What certification does the Arai GP-7SRC have?The Arai GP-7SRC meets or exceeds the FIA 8860-2018 homologation standard.  Is the GP-7SRC the same as the GP-7SRC ABP?No. The GP-7SRC meets FIA 8860-2018, while the GP-7SRC ABP is a separate helmet that meets the enhanced FIA 8860-2018 ABP standard.  Is the GP-7SRC intended for closed-cockpit racing?Yes. Arai specifically describes the GP-7SRC as being engineered for the demands of high-end closed-cockpit racing.  Is the Arai GP-7SRC carbon fiber?Yes. It uses Arai's proprietary racing carbon fiber material and weave combined with additional reinforcing materials to provide high strength while controlling weight and shell size.  Does the GP-7SRC support HANS or other FHR systems?Yes. The helmet includes factory-installed M6 threaded mounting provisions designed for compatible Head and Neck Restraint anchor systems. Can I install an Eject system?Yes. A pre-cut pocket under the crown pad allows installation of an optional Eject helmet removal system.  Can a drink tube be installed?Yes. The removable chin liner is designed to simplify drink-tube installation and provides four potential hose-routing positions. :contentReference Can I change the cheek pads to adjust fit?Yes. Arai offers replacement GP-7 cheek pads in multiple thicknesses, allowing the cheek fit to be adjusted when needed.  Can the GP-7SRC be custom painted?Yes, but Arai warns that the helmet trims should not be removed during painting because removing them can void the FIA certification.  What sizes does the GP-7SRC come in?Arai currently lists X-Small, Small, Medium, and Large.  Does this helmet require a signature for delivery?Yes. This helmet ships with signature required for delivery.