all

Sparco Land Martini Racing Nomex Gloves The Sparco Land Martini Racing Nomex Gloves celebrate one of rally racing’s most recognizable partnerships. Their period-inspired design recalls the historic Sparco and Martini Racing equipment used during the golden era of international rally competition, while updated materials and current FIA homologation make them suitable for modern motorsport. Embroidered Sparco and Martini Racing patches give the gloves an authentic heritage appearance. An ergonomic palm, reinforced stitching, suede grip surfaces, and elastic wrist support provide the control and comfort required for competitive driving. Available in Navy or Red, the Sparco Land Martini Racing glove is designed for drivers who want classic motorsport character without giving up contemporary fire-resistant protection. Historic Martini Racing Design The Land glove recreates the clean, understated appearance of vintage Sparco racing equipment associated with Martini Racing. Period-correct embroidered patches preserve the traditional look more effectively than modern printed graphics. The result is a glove that complements historic race cars, rally-inspired builds, vintage racing suits, and drivers who appreciate authentic motorsport heritage. Updated for Modern Competition Although the styling is inspired by earlier generations of Sparco equipment, the construction has been updated to meet current performance and safety expectations. Modern fire-resistant materials and FIA 8856-2018 approval provide protection suitable for many present-day racing environments. This combination of vintage appearance and current homologation allows drivers to maintain a period-correct look without relying on outdated protective equipment. Ergonomic Palm Construction The palm follows the natural position of the hand around the steering wheel. Reinforced stitching helps the glove maintain its shape while reducing excess material and bunching in high-contact areas. The shaped construction supports more consistent steering feedback and improves comfort during repeated steering inputs, gear changes, and extended driving sessions. Suede Grip Surfaces Suede material across the palm and fingertips improves traction against the steering wheel. The textured surface provides a secure, traditional grip while preserving the tactile feedback many drivers prefer from a classic racing glove. Additional fingertip grip also improves control when operating switches, steering-wheel buttons, shifters, and other cockpit equipment. Reinforced Stitching Reinforced seams support the areas exposed to repeated flexing and steering-wheel contact. The durable construction helps the glove retain its fit and performance through regular racing use. The stitching is positioned to complement the ergonomic palm design while maintaining the clean appearance associated with vintage motorsport equipment. Elastic Wrist Support An elasticated wrist helps hold the glove securely in place without requiring a bulky external strap. The streamlined closure supports comfortable overlap with the sleeve of a compatible racing suit. The elastic wrist also allows quick entry and removal between sessions while maintaining a close fit during competition. FIA 8856-2018 Approved The Sparco Land Martini Racing Gloves are approved to the FIA 8856-2018 standard for protective clothing used in automobile competition. This homologation combines modern fire-resistant protection with the glove’s heritage-inspired appearance. Drivers should verify the certification requirements and homologation validity rules of their racing organization before competition. Sparco Land Martini Racing Glove Details Classic Martini Racing heritage design Period-correct embroidered Sparco and Martini Racing patches Modern fire-resistant Nomex construction Ergonomic palm follows the natural driving position Reinforced stitching improves durability Suede palm provides dependable steering-wheel grip Suede fingertips improve control and feedback Elastic wrist support provides a secure fit Available in Navy or Red FIA 8856-2018 approved Sparco Land Martini Racing Specifications Manufacturer: Sparco Collection: Martini Racing Model: Land Product Type: Nomex Auto Racing Gloves Palm: Ergonomic design with reinforced stitching Grip Material: Suede palm and fingertips Wrist: Elastic support Available Colors: Navy and Red Homologation: FIA 8856-2018 Vintage Character Without Vintage Compromises The Sparco Land Martini Racing glove is intended for drivers who want equipment that looks appropriate in a historic or rally-inspired cockpit but still provides current protective performance. Its embroidered branding, suede grip, and simple construction reflect the character of classic racing gloves, while the updated Nomex materials and FIA approval provide the protection expected from modern Sparco equipment. Sparco Martini Racing Land Nomex Glove Size Chart Frequently Asked Questions Are the Sparco Land Martini Racing Gloves FIA approved?Yes. They are approved to the FIA 8856-2018 standard. Are these reproductions of vintage Sparco gloves?They are heritage-inspired reproductions that preserve the period Martini Racing appearance while using updated Sparco materials and current homologation. Are the Martini Racing logos embroidered?Yes. The gloves use period-correct embroidered Sparco and Martini Racing patches. What material provides the steering-wheel grip?Suede material on the palm and fingertips provides traction and tactile feedback. What colors are available?The Sparco Land Martini Racing Gloves are available in Navy and Red. Do the gloves use a wrist strap?No. An elastic wrist support holds the glove securely in place without a separate closure strap. How should the Sparco Land Gloves fit?They should fit closely around the hand and fingers without restricting movement or leaving excessive material at the fingertips. Are these gloves appropriate for a historic race car?Yes. Their vintage-inspired appearance is especially well suited for historic racing, rally restorations, and period-themed motorsport equipment.

Sparco Prime LT Limited Edition Driver Race Suit The Sparco Prime LT is a limited edition driver's race suit available only for the US market. The Sparco Prime LT race suit has a bold design  two featuring two colorways. This is a limited edition suit, the Sparco Prime LT is available only as long as supplies last. The Sparco Prime LT uses suit material originally developed for the McLaren Formula One team, making it one of the lightest FIA approved racing suits in the world. The Sparco Prime LT boasts unparalleled technological features created in the Sparco R&D laboratories, a project optimizing every detail of materials and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa wrists and ankle cuffs, the neck and shoulder pads were further reduced, thinner thread was used and the stitching flattened even more. The Sparco Prime LT features a three-layer construction using proprietary Sparco technology. The third, outer layer is a double-faced mesh made from original DuPont Nomex Comfort woven using the Kompact system. The material contains a high percentage of antistatic fibers, giving it extremely effective antistatic properties as well as excellent breathability. The Sparco Prime LT racing suit weighs from 240 to 270 grams per square meter (depending on size). Sparco Prime LT Driver Race Suit Details: Lightest FIA approved racing suit in the world Exclusive DuPont Nomex fibers provide superior fire protection, breathability, and comfort Pre-curved arms and legs Lightweight zipper and collar Breathable stretch panels throughout FIA 8856-2000 approved

Paragon Drain Kit Paragon’s Drain Kit is the ultimate accessory for draining water from Paragon cooling garments, hose sets, coolers, and bags. The Paragon Drain Kit includes two male connectors and two female connectors.

Paragon Guardian Water Hose Set Paragon’s innovative Guardian Water Supply/Return Hose Set is designed for efficiency and durability. The Guardian Hose is insulated to keep your cooling garment supplied with icy cold water from a Paragon Viking or Arctic Fox cooler. The supply side of the Paragon Guardian Water Supply Hose delivers cooling water to the tubing inlet of your garment, while the return side of the hose set returns water warmed by body heat back to the cooler to be re-chilled and recirculated. Foam insulation acts as a thermal barrier to properly maintain the temperature of the water being supplied to your cooling garment. Paragon Guardian connectors on the hose set are designed for emergency release, allowing you to easily disconnect with a quick pull on the hose set or garment. Paragon Guardian Supply Hose Lengths 4 feet (2 lbs.) 8 feet (2 lbs.) 12 feet (3 lbs.) 20 feet (4 lbs.)

Sparco Ice Vest Introducing the Sparco Ice Vest: Unleash Your Full Potential with Advanced Driver CoolingTake your racing performance to new heights with the Sparco Ice Vest, a cutting-edge solution designed to optimize driver cooling before and after races. Engineered with precision and backed by extensive research, this vest is a game-changer for drivers who prioritize peak performance and recovery. The Sparco Ice Vest was originally developed for Sparco’s professional drivers in Formula 1 and INDY Car. The Ice Vest is designed to be used before and after racing. Cooling the body core temperature before driving has proven to help driver performance. The Ice Vest uses eight reusable medical grade ice packs placed strategically in the vest. The Ice Vest has internal mesh pockets for maximum cold transfer and a waterproof membrane. The medical ice packs are non-allergenic and reusable. Available in X-Small - XXX-Large.Key Features of the Sparco Ice Vest:Advanced Cooling Technology: The Sparco Ice Vest employs state-of-the-art cooling technology to regulate body temperature effectively. By utilizing advanced materials and innovative design, it ensures rapid cooling and heat dissipation, allowing you to maintain focus and perform at your best.Pre-Race Cooling: Before stepping into the cockpit, it's crucial to prepare your body for the demanding race ahead. The Sparco Ice Vest offers superior pre-race cooling, helping to lower core body temperature and optimize your physical and mental readiness. Experience heightened concentration and stamina from the moment the race begins.Post-Race Recovery: Racing can take a toll on your body, leading to heat buildup and fatigue. The Sparco Ice Vest provides exceptional post-race cooling, aiding in the recovery process. By reducing inflammation and promoting efficient heat dissipation, it accelerates recovery time, allowing you to bounce back faster and be ready for the next challenge.Ergonomic Design for Maximum Comfort: The Sparco Ice Vest is meticulously designed for a comfortable and ergonomic fit. Its lightweight construction ensures unrestricted movement, while adjustable straps allow for a personalized and secure fit. Stay cool and comfortable throughout the race, with no compromise on performance.Durable and High-Quality: Built to withstand the rigors of motorsport, the Sparco Ice Vest is made from premium materials, guaranteeing long-lasting performance. The vest's durability ensures it can withstand the demands of intense racing environments, providing reliable cooling support race after race.Be sure you can continue to operate at your full potential on the track with the Sparco Ice Vest. Engineered for optimal driver cooling before and after races, this innovative gear is a must-have for serious racers seeking a competitive edge.Don't let heat hinder your performance or delay your recovery. Invest in the Sparco Ice Vest today and experience the power of advanced driver cooling.

OMP FIRST BALACLAVA FIA 8856-2018 / SFI 3.3/5 You’re strapped into your cockpit, the engine roars like a wild beast, and the temperature inside feels like a sauna on wheels. Enter the FIRST Balaclava—your ultimate wingman for fiery track days and high-octane racing. Designed with FIA 8856-2018 and SFI 3.3/5 compliance, this entry-level fire-retardant balaclava keeps your face cool, comfortable, and—most importantly—protected when things heat up. OMP First Balaclava Features & Benefits Fire-Retardant Protection: Made for heroes who live life in the fast lane, this balaclava meets the highest safety standards, so you can focus on the finish line instead of the flames. Flat Seams: Say goodbye to itch and irritation. Flat seams ensure a snug fit without the scratchy distractions. It’s like a second skin—one that’s flame-resistant. Breathable Fabric: Designed to keep your head in the game (literally), the fabric wicks away sweat and lets you breathe easy, even when the heat is on. OMP First Balaclava Specifications Material: Advanced fire-retardant blend Certifications: FIA 8856-2018 and SFI 3.3/5 Fit: One size fits most with a snug, stretchable design Color: Classic white (because style counts, even under the helmet!) OMP First Balaclava FAQs Q: Is this balaclava required for racing events?A: Absolutely, if your racing series mandates FIA or SFI-rated gear. Even if it’s not required, it’s a smart move to stay safe. Q: Can I wash this balaclava?A: Yes! Hand wash with mild detergent and air dry to keep it in peak condition. Avoid bleach—it’s not a good look. Q: Does it fit under all helmets?A: Yes, it’s designed to fit snugly under standard racing helmets without adding bulk. Why Wait? Safety isn’t just an option—it’s a necessity. With the FIRST Balaclava, you’re not just meeting regulations; you’re elevating your game. Don’t let fire hazards or discomfort slow you down. Click Add to Cart now and get ready to own the track like a pro.  

Stilo Short Top Air System For Maglock Keep Your Stilo ST5 or ST6  Helmet Ventilated With The Stilo Top Air Maglock Kit The exclusive Stilo "Top Air System" for ST5 or ST6 helmets takes fresh air to the driver's head and is fitted with an outlet designed to work with a Maglock system. With the new innovative Top Air outlet you can now quickly connect your fresh-air system to your Stilo ST5 helmet. This kit does not come with a flow adjuster. Air enters your Stilo ST5 or ST6 through four small ventilation holes molded into the top of the helmet shell. That way, forced cooling air fed into the Top Air is directed to the top of the head . Warm, moist exhaust air flows out through the side holes on top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Short Top Air Maglock System can be fitted to all Stilo ST5 and ST6 model helmets.

HANS Quick Click Anchors Introducing the revolutionary HANS Quick Click Anchors - the ultimate solution for quick and easy release during high-speed racing. These anchors feature pull strings that allow for lightning-fast release, ensuring maximum safety and efficiency on the track. The pull strings are equipped with velcro patches sewn onto the ends, providing a secure and reliable grip for quick and effortless removal. With the HANS Quick Click Anchors, you can say goodbye to the hassle of traditional anchor systems and hello to a new level of convenience and speed. Upgrade your racing experience with the HANS Quick Click Anchors, available now at Competition Motorsport. Don't miss out on this innovative product that is changing the game for racers everywhere.

Sparco Helmet Shields  The Sparco Helmet Shields for the Stealth RF helmet are built for racers who want clear vision under any conditions. Whether you’re cutting through glare, rain, or dust, these visors deliver the optical clarity and protection Sparco helmets are known for. Available in multiple tints and finishes, each shield provides distortion-free visibility and exceptional durability on track or in the pits. Precision-Made for Stealth RF Helmets Engineered exclusively for the Sparco Stealth RF and Stealth RF Carbon helmets, these replacement shields maintain perfect fit and aerodynamic efficiency. Each lens includes Sparco’s anti-scratch and anti-fog treatment, so you can keep your focus on the race line instead of your visor. Features • Compatible with Sparco Stealth RF and Stealth RF Carbon helmets• Available in clear, tinted, and mirrored finishes• Anti-scratch and anti-fog coatings for maximum clarity• Easy tool-free replacement design• Lightweight, high-impact resistant construction• Designed to accept tear-offs for track or endurance use Vehicle Fitment Universal — designed for use with Sparco Stealth RF and Stealth RF Carbon helmets only. Not compatible with other Sparco models. Sparco Helmet Shields (Stealth RF) FAQs: Are these visors interchangeable with other Sparco helmets? No, they’re designed specifically for Stealth RF and Stealth RF Carbon helmets to ensure perfect fit and performance. Do they come with tear-offs? Tear-offs are sold separately, but the shields are pre-drilled and ready for them. Can I use a mirrored visor at night? It’s not recommended. Use a clear visor for night racing or low-light conditions. How do I prevent fogging on humid days? The shields come with anti-fog coating, but applying an additional visor treatment before a race can help in extreme conditions. How do I replace the shield? Simply release the pivot screws on each side, remove the old visor, and snap the new one into place — no special tools needed. Upgrade your vision with Sparco Helmet Shields designed to keep you focused and protected on every lap.

CMS Performance Harness Install Kit For Gen 6 Camaro This Product Fits The Following Cars: Chevrolet Camaro Coupe, all (2016+) Quick, Easy Installation of Harness Lap Belts in the Gen 6 Camaro The CMS Performance Harness Install Kit for the Gen 6 Camaro provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your Gen 6 Camaro. Each CMS Performance Gen 6 Camaro Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance Gen 6 Camaro Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the Gen 6 Camaro, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the Gen 6 Camaro without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-G6C Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

Sparco Stealth RF Carbon Fiber Racing Helmet – Snell SA2025 / FIA 8859-2024 The Sparco Stealth RF Carbon Racing Helmet combines lightweight carbon fiber construction, advanced impact protection, and professional motorsport technology for drivers who demand exceptional performance on track. Certified to Snell SA2025 and FIA 8859-2024, this premium full-face racing helmet delivers modern safety engineering, effective ventilation, and lasting comfort for competitive racing. Engineered around an ultra-lightweight carbon fiber shell, the Sparco Stealth RF Carbon helps reduce helmet weight while maintaining excellent strength and energy absorption characteristics. Its advanced ventilation system combines chin bar intakes, upper air vents, and rear exhaust ports to promote cooling during demanding racing sessions. The helmet also features removable and washable fire-resistant interior padding, a three-position adjustable shield with a secure central locking mechanism, and factory-installed HANS/FHR posts. With provisions for optional hydration and racing communications, the Stealth RF Carbon is equally suited for sprint racing, GT competition, endurance events, and high-performance track driving. Sparco Stealth RF Carbon Helmet Key Features Snell SA2025 and FIA 8859-2024 Certified: Meets current automotive racing helmet standards for a wide range of motorsport applications. Premium Carbon Fiber Shell: Lightweight carbon construction engineered for excellent strength-to-weight performance and driver comfort. Advanced Impact Protection: Engineered shell and energy-absorbing EPS liner work together to manage impact forces. High-Efficiency Ventilation: Multiple front chin bar intakes, upper air vents, and rear exhaust ports help regulate internal helmet temperature. Three-Position Adjustable Shield: Allows drivers to select shield positions for ventilation and visibility. Central Shield Locking Mechanism: Designed to securely retain the shield during demanding racing conditions. Removable Fire-Resistant Interior: Washable comfort padding makes helmet cleaning and maintenance easier. Factory-Installed HANS/FHR Posts: Supplied ready for connection to compatible head and neck restraint systems. Optional Hydration Compatibility: Designed to accommodate a compatible drink system for endurance racing. Communication System Ready: Supports installation of compatible racing radio components, including microphones and in-ear communication equipment. Dual Shell Sizes: Two shell sizes help optimize fit, comfort, and overall helmet weight. Seven Fit Options: Available in XS, S, M, M+, L, XL, and XXL. Lightweight Carbon Fiber Shell Construction The Sparco Stealth RF Carbon features a premium carbon fiber shell engineered to provide high strength while minimizing unnecessary helmet weight. Reducing helmet mass can help minimize the load supported by a driver's neck during high-speed cornering, braking, and extended racing sessions. The carbon shell works with an advanced impact-absorbing EPS liner to manage impact energy and provide the protection required by its motorsport homologations. For drivers looking to upgrade from a traditional fiberglass racing helmet, the Stealth RF Carbon offers a premium carbon construction without requiring the investment associated with Sparco's FIA 8860 premium helmet series. Advanced Ventilation for Maximum Driver Comfort Managing cockpit heat is essential for maintaining concentration and comfort during demanding racing conditions. The Sparco Stealth RF Carbon incorporates a high-efficiency ventilation system featuring multiple air intake and extraction points throughout the helmet. Front Chin Bar Intakes: Introduce fresh air into the helmet. Upper Ventilation Ports: Help circulate airflow around the head. Rear Exhaust Vents: Support the removal of warm air and moisture. This ventilation system helps limit heat buildup during long track sessions, making the helmet particularly well suited for road racing, time attack, GT competition, and endurance racing. Three-Position Shield With Central Locking System The Sparco Stealth RF Carbon incorporates a three-position adjustable shield system engineered for racing visibility and ventilation control. The adjustable shield allows drivers to select different positions depending on their ventilation requirements and track conditions. A central locking mechanism provides secure closure and helps maintain shield retention during high-speed driving. The helmet is compatible with selected Sparco Stealth replacement shield options, including smoke, spectrum, and anti-fog configurations, sold separately. Removable and Washable Fire-Resistant Interior Comfort and helmet maintenance are especially important for drivers who spend extended periods on track. The Stealth RF Carbon features removable fire-resistant interior padding designed to provide a comfortable, secure fit while simplifying regular cleaning. The washable interior components can be removed and cleaned according to Sparco's instructions to help maintain freshness between racing events. Interior options include black and red configurations, allowing drivers to select their preferred appearance. Factory-Installed HANS and FHR Posts The Sparco Stealth RF Carbon comes equipped with factory-installed frontal head restraint posts as standard equipment. These posts allow connection to compatible HANS and other approved FHR systems without requiring the installation of additional helmet posts. Proper head and neck restraint compatibility is essential for racing safety. Always confirm that your chosen FHR device and tether system are compatible with the helmet hardware. Hydration and Racing Communications Compatibility The Stealth RF Carbon is designed with professional motorsport applications in mind, including endurance events where communication and hydration are essential. The helmet supports installation of compatible optional hydration equipment, allowing drivers to integrate a drinking system for extended racing sessions. It is also prepared for compatible racing communication accessories, including microphone and earpiece components. Hydration equipment, radio systems, microphones, and related accessories are sold separately unless otherwise specified. Two Shell Sizes and Seven Helmet Fit Options The Sparco Stealth RF Carbon uses two shell sizes to provide a more tailored fit across its available size range. Seven helmet fit options are available, covering XS through XXL, including an intermediate M+ size. The helmet is designed to fit securely around the head without excessive pressure points. Proper helmet fit is essential for impact protection and driver comfort. Before selecting a helmet, measure your head circumference around the widest part of your head, approximately one inch above the eyebrows, and compare the measurement with Sparco's official helmet fitting guide. Sparco Stealth RF Carbon Technical Specifications Manufacturer: Sparco Model: Stealth RF Carbon Manufacturer Part Number Series: BRH0003B0 Helmet Type: Full-Face Racing Helmet Snell Certification: SA2025 FIA Homologation: FIA 8859-2024 Shell Material: Carbon Fiber Impact Liner: Energy-Absorbing EPS Shell Sizes: Two Available Sizes: XS, S, M, M+, L, XL, XXL Exterior Finish: Exposed Carbon Fiber Interior Options: Black or Red Interior Material: Fire-Resistant Comfort Padding Removable Interior: Yes Washable Interior: Yes, According to Manufacturer Instructions Shield System: Three-Position Adjustable Shield Lock: Central Locking Mechanism Ventilation: Front, Upper, and Rear Ventilation Ports HANS/FHR Posts: Factory Installed Hydration Compatible: Yes, Optional Accessories Required Communication Compatible: Yes, Optional Accessories Required Primary Application: Automotive Racing and Track Driving Quantity: Sold Individually Sparco Stealth RF Carbon Helmet Sizing Chart Sparco Stealth RF Carbon Helmet Care and Maintenance Proper maintenance helps preserve the appearance, comfort, and protective performance of your Sparco racing helmet. Exterior Care: Clean the carbon fiber shell using a soft microfiber cloth and helmet-safe cleaning products. Avoid abrasive cleaners, harsh solvents, or chemicals that could damage the exterior finish. Interior Care: Remove and clean the washable fire-resistant padding according to Sparco's care instructions. Allow all interior components to dry completely before reinstalling them. Shield Maintenance: Inspect the shield regularly for scratches, cracks, or damage that could interfere with visibility. Use appropriate shield-cleaning products and replace worn components with compatible Sparco parts. Inspection and Storage: Inspect the shell, liner, chin strap, shield hardware, and FHR posts before use. Store the helmet in a cool, dry environment away from direct sunlight, excessive heat, and chemical exposure. Sparco Stealth RF Carbon Helmet FAQs Is the Sparco Stealth RF Carbon Snell SA2025 certified?Yes. The Sparco Stealth RF Carbon is available with Snell SA2025 and FIA 8859-2024 homologations. Always verify certification on the helmet's actual homologation labels and confirm eligibility with your racing organization. Is the Sparco Stealth RF Carbon FIA approved?Yes. The helmet carries FIA 8859-2024 homologation. Acceptance depends on the specific safety requirements of your racing series or sanctioning organization. Is the Sparco Stealth RF Carbon made from real carbon fiber?Yes. The Stealth RF Carbon uses a lightweight carbon fiber shell designed to optimize strength and reduce helmet weight. What is the difference between the Sparco Stealth RF and Stealth RF Carbon?The standard Stealth RF uses a fiberglass-based shell, while the Stealth RF Carbon features premium carbon fiber construction. The carbon version is designed for drivers who prioritize weight reduction and high-performance materials. Does the Sparco Stealth RF Carbon include HANS posts?Yes. Factory-installed FHR posts are included for use with compatible head and neck restraint systems. Can I remove and wash the helmet lining?Yes. The fire-resistant interior padding is removable and washable. Follow the manufacturer's cleaning instructions to preserve its fit and performance. Does the helmet include a locking shield?Yes. The Stealth RF Carbon features a three-position adjustable shield with a central locking mechanism for secure closure. Can I add a hydration system?Yes. The helmet is designed to accommodate compatible optional drink systems, making it suitable for endurance racing applications. Can I install a racing radio system?Yes. The Stealth RF Carbon is compatible with optional racing communication equipment, including microphones and earpieces. Communication accessories are not included unless otherwise specified. How many helmet sizes are available?The Stealth RF Carbon is offered in seven sizes: XS, S, M, M+, L, XL, and XXL, across two shell sizes. Is this helmet suitable for endurance racing?Yes. Its lightweight carbon fiber construction, efficient ventilation, removable fire-resistant interior, and compatibility with optional hydration and communications make it well suited for endurance racing. Does FIA 8859-2024 certification mean the helmet is FIA 8860 approved?No. FIA 8859-2024 and FIA 8860 are different homologation standards. Drivers whose racing series requires FIA 8860 certification should select a helmet carrying the appropriate FIA 8860 homologation. Experience Lightweight Carbon Fiber Racing Performance The Sparco Stealth RF Carbon SA2025 Racing Helmet delivers professional-level protection, lightweight carbon fiber construction, advanced ventilation, and exceptional comfort in a modern full-face racing design. With FIA 8859-2024 and Snell SA2025 certification, factory-installed HANS posts, removable fire-resistant padding, and a secure adjustable shield system, the Stealth RF Carbon is built to meet the demands of serious motorsport competitors. Upgrade your racing safety equipment with the Sparco Stealth RF Carbon and experience the strength, comfort, and performance of premium carbon fiber helmet technology.

CMS Performance Rear Seat Delete BMW G87 M2 The CMS Performance rear seat delete for the BMW G87 M2 is specifically designed and manufactured by CMS Performance in the USA to fit seamlessly with the CMS Performance Roll Bar for BMW G87 M2 (2023+). It has cut-outs located specifically to fit the CMS Performance roll bar.

Stilo ST6 GT ZERO Carbon Fiber Racing Helmet  The Stilo ST6 GT ZERO Carbon Fiber 8860-2018 Racing Helmet represents the pinnacle of Stilo's lightweight, high-performance motorsport helmet engineering. Developed for professional racers who demand advanced protection, exceptional visibility, and maximum driving comfort, the ST6 GT ZERO combines Stilo's exclusive PURO carbon technology with FIA 8860-2018 homologation. As the evolution of the championship-winning ST5 platform, the ST6 introduces improved aerodynamics, redesigned ventilation, an expanded field of vision, enhanced interior comfort, and an innovative dual-locking visor system. Engineered with input from professional motorsport teams and drivers, the Stilo ST6 GT ZERO is the lightest helmet in the ST6 GT lineup. Its premium carbon fiber shell, integrated communication accessory ports, and advanced safety features make it an exceptional choice for endurance racing, GT competition, prototype racing, and other demanding motorsport applications. Stilo ST6 GT ZERO 8860-2018 Helmet Features FIA 8860-2018 Homologated: Advanced motorsport safety certification for high-level racing competition. Ultra-Lightweight ZERO Carbon Shell: High-tensile carbon fiber construction developed to minimize helmet weight while maintaining structural strength. Stilo PURO Technology: Specialized manufacturing process minimizes unnecessary fillers, lacquers, and clear coats. Improved Aerodynamics: Refined shell geometry developed and tested for exceptional stability at racing speeds. Enhanced Front Ventilation: Redesigned intake system improves airflow and driver comfort. Integrated Top Ventilation: Ventilation openings help channel air through the helmet's internal structure. Increased Downward Visibility: Updated eyeport design provides improved awareness of cockpit controls and track surroundings. Dual-Locking Visor System: Secure visor retention in both fully closed and approved ventilation positions. Injection-Molded Shield: High-performance visor design featuring an improved washable anti-fog treatment. Redesigned Visor Hardware: Updated mechanism designed for smooth operation and convenient shield replacement. Improved Interior Comfort: Redesigned cheek padding supports stability and comfort during extended races. Integrated Side Accessory Ports: Compatible with select Stilo communication, hydration, and ventilation accessories. HANS/FHR Compatible: Supports approved head and neck restraint systems. Intermediate Oval Fit: Interior shape designed to accommodate a broad range of racing drivers. Multiple Shell Sizes: Three shell sizes across the manufacturer's listed size range. New Shell Size Options: Now offered in four shell sizes, the Stilo ST6 auto racing helmet allows you to receive the lightest and smallest shell size possible for your head shape. Stilo PURO Carbon Technology – The Ultimate Lightweight Racing Helmet The ST6 GT ZERO features Stilo PURO carbon fiber technology, a specialized manufacturing process developed to reduce unnecessary weight while preserving strength and protective performance. Traditional carbon fiber helmets often incorporate additional layers of fillers, lacquer, and clear coatings. Stilo's PURO process minimizes these finishing materials to create a lighter helmet without compromising the advanced carbon fiber construction. The result is a distinctive carbon fiber finish that showcases the helmet's premium materials while helping reduce weight at the driver's head. Lower helmet weight can help reduce neck fatigue during sustained cornering loads, heavy braking, and long endurance races. For competitive drivers, this can translate into improved comfort and reduced physical strain over extended sessions. FIA 8860-2018 Homologation for Professional Motorsport The Stilo ST6 GT ZERO is certified to FIA 8860-2018, an advanced motorsport helmet standard developed for demanding professional racing environments. FIA 8860-2018 establishes stringent requirements for impact protection, penetration resistance, flame resistance, and structural performance. The ST6 GT ZERO combines its high-tensile carbon fiber shell with advanced impact-absorbing construction to meet these demanding requirements. Certification Note: This model is FIA 8860-2018 homologated. It is not the separate ST6 FN ABP model and should not be advertised as FIA 8860-2018 ABP certified. Always verify your racing organization's helmet requirements before competition. Advanced Aerodynamics Developed for High-Speed Racing The Stilo ST6 platform incorporates aerodynamic improvements developed through professional motorsport testing and feedback. The refined shell profile is designed to improve stability in high-speed airflow while reducing unnecessary aerodynamic disturbance around the helmet. These improvements are particularly beneficial in GT and endurance racing, where consistent helmet stability and comfort are important during extended competition. The ST6 GT ZERO also supports compatible Stilo aerodynamic accessories for drivers who require additional customization based on vehicle configuration. Redesigned Ventilation for Increased Airflow The ST6 GT ZERO incorporates an upgraded ventilation system designed to improve airflow without compromising helmet protection. Redesigned front ventilation channels direct fresh air into the helmet, while integrated upper ventilation openings allow airflow through the internal impact-absorbing structure. This design helps manage heat and moisture buildup during demanding racing conditions. The ST6 platform's improved airflow is especially valuable in enclosed cockpits, where temperatures can increase significantly during long racing sessions. Improved Downward Visibility and Driver Awareness Visibility is essential for precision driving, especially when monitoring steering wheel displays, dashboard information, and surrounding competitors. The Stilo ST6 GT ZERO features an updated eyeport design that improves downward visibility compared with the previous ST5 platform. The redesigned opening allows drivers to see more of the cockpit environment while maintaining the helmet's protective construction. This improvement supports greater awareness during braking, cornering, and high-speed competition. Innovative Dual-Locking Visor System One of the most significant improvements introduced with the ST6 series is its dual-locking visor mechanism. Unlike conventional systems that secure the visor only when fully closed, the ST6 visor is designed to lock securely in both the fully closed position and an approved ventilation position. This gives drivers the ability to maintain controlled ventilation while retaining secure visor positioning. The system is engineered to meet applicable FIA requirements and provide reliable operation under demanding racing conditions. Injection-Molded Visor with Washable Anti-Fog Treatment The ST6 GT ZERO uses a redesigned injection-molded visor engineered for optical performance, durability, and convenient maintenance. The shield features an advanced washable anti-fog treatment that helps maintain visibility during changing temperature and humidity conditions. Updated visor hardware provides smoother operation and simplifies shield replacement when changing between compatible clear and tinted Stilo ST6 shields. Optional anodized visor hardware is available for drivers seeking additional customization. Redesigned Interior Padding and Cheek Pads The ST6 platform features updated interior padding designed to improve fit, comfort, and helmet stability. Redesigned cheek pads provide supportive contact around the driver's face while helping minimize unnecessary movement during high-speed driving. The black fire-resistant Nomex interior provides motorsport-appropriate materials while maintaining a comfortable fit during extended sessions. The helmet also incorporates provisions for compatible communication accessories, allowing drivers to customize their setup for different racing applications. Integrated Communication, Hydration, and Air System Compatibility The Stilo ST6 GT ZERO retains the integrated side accessory ports that made the ST5 platform popular among professional racing drivers. These ports accommodate compatible Stilo accessories while helping maintain a clean helmet profile. Depending on the selected equipment, compatible accessories may include: Stilo integrated communication systems Compatible microphone and speaker equipment Hydration systems and drinking tubes Side-air and ventilation accessories Selected aerodynamic components Communication electronics, hydration systems, and external ventilation accessories are sold separately unless specifically included in the selected configuration. HANS and Frontal Head Restraint Compatibility The Stilo ST6 GT ZERO is designed for use with compatible HANS and other approved Frontal Head Restraint systems. The helmet supports appropriate head and neck restraint anchor hardware to provide the connection required for compatible FHR devices. Always verify anchor hardware compatibility and follow the helmet and restraint manufacturers' installation instructions. Stilo ST6 GT ZERO Carbon Fiber Helmet Specifications Manufacturer: Stilo Model: ST6 GT ZERO Manufacturer Part Number Family: AA0800AG3R Helmet Type: Full-face automotive racing helmet Safety Certification: FIA 8860-2018 Shell Material: High-tensile ZERO carbon fiber Construction Technology: Stilo PURO carbon Finish: Premium carbon fiber Helmet Fit: Intermediate Oval Shell Sizes: Three, per current manufacturer specifications Visor: Clear injection-molded shield included Visor System: Dual locking, fully closed and ventilation positions Anti-Fog: Washable anti-fog treatment Ventilation: Redesigned front and upper ventilation Interior: Black Nomex fire-resistant lining Chin Strap: Double D-ring closure FHR Compatibility: HANS and approved head and neck restraint systems Communication Compatibility: Integrated side accessory ports Hydration Compatibility: Compatible with optional Stilo hydration accessories Helmet Bag: Included Compatible Shields: Stilo ST6 helmet shields Stilo ST6 GT ZERO vs. ST5 GT ZERO The ST6 represents the next generation of Stilo's professional motorsport helmet platform, with improvements across several key performance areas. Reduced Weight: Updated construction and shell engineering focus on lower overall weight. Improved Ventilation: Redesigned front intake system enhances airflow. Greater Visibility: Updated eyeport shape improves downward viewing angles. Advanced Aerodynamics: Refined shell geometry supports improved high-speed stability. Updated Interior: Redesigned padding helps improve comfort and helmet stability. New Visor Design: Injection-molded construction and improved anti-fog treatment. Dual Visor Lock: Secure closure in fully closed and ventilation positions. Improved Shield Hardware: Updated pivot components support smoother operation and maintenance. These upgrades make the ST6 GT ZERO an advanced successor for drivers who appreciate the lightweight performance and integrated accessory compatibility of the ST5 series. Stilo ST6 GT ZERO vs. ST6 GT Carbon The ST6 GT ZERO and standard ST6 GT Carbon share the same core ST6 platform and FIA 8860-2018 certification, but the ZERO places additional emphasis on minimizing helmet weight. The ST6 GT ZERO uses Stilo's lightweight PURO carbon construction with reduced finishing materials to achieve the lightest configuration in the ST6 GT range. The standard ST6 GT Carbon offers advanced carbon fiber construction and many of the same platform improvements, while the ZERO is designed for drivers who prioritize maximum weight reduction. Stilo ST6 GT ZERO Helmet Sizing Chart  The ST6 GT ZERO features an Intermediate Oval interior shape and multiple shell sizes to help deliver a comfortable, secure fit. To measure your head, use a flexible measuring tape around the largest circumference of your head, approximately one inch above your eyebrows. Keep the tape level and measure around the widest point at the back of your head. Repeat the measurement two or three times and compare the result with Stilo's official helmet size guide. Fitment Tip: Some drivers who normally wear size 59 in other helmet brands find Stilo size 60 more comfortable, particularly when moving to a larger shell configuration. This is a general fitment observation, not a substitute for measuring and trying on the helmet. The correct racing helmet should fit snugly around the entire head without painful pressure points or excessive movement. Stilo ST6 GT ZERO Frequently Asked Questions What certification does the Stilo ST6 GT ZERO have? The Stilo ST6 GT ZERO is homologated to FIA 8860-2018, an advanced helmet safety standard used in professional motorsport. Is the ST6 GT ZERO the same as the ST6 FN ABP? No. The ST6 GT ZERO is an FIA 8860-2018 helmet. The ST6 FN ABP is a separate model designed to meet the enhanced ABP homologation requirements. What makes the ST6 GT ZERO different from the standard ST6 GT Carbon? The ZERO version uses Stilo's PURO carbon technology to reduce unnecessary finishing materials and minimize shell weight. What is Stilo PURO technology? PURO is Stilo's carbon fiber manufacturing approach that minimizes excess fillers, lacquer, and clear coatings to create an exceptionally lightweight carbon helmet. Does the Stilo ST6 GT ZERO have a dual-locking visor? Yes. The ST6 visor system locks in both the fully closed position and an approved ventilation position. Does the ST6 GT ZERO include a clear visor? Yes. The helmet includes a clear face shield with an advanced washable anti-fog treatment. Is the Stilo ST6 GT ZERO compatible with HANS devices? Yes. The helmet is designed for use with compatible HANS and other approved head and neck restraint systems. Does the helmet have integrated communication electronics? The ST6 GT ZERO includes integrated side accessory ports and supports compatible communication components. A complete intercom system is not included as standard. Can I install a drinking tube? Yes. The helmet supports compatible Stilo hydration accessories, which are available separately. Does the ST6 GT ZERO have improved ventilation compared with the ST5? Yes. The ST6 features redesigned front ventilation and additional airflow improvements developed for high-performance racing. What head shape fits the ST6 GT ZERO? The helmet features an Intermediate Oval interior fit. Proper size selection should be based on head measurements and an actual fit check. How many shell sizes does the ST6 GT ZERO use? The manufacturer's current specifications list three shell sizes across the available size range. Does the Stilo ST6 GT ZERO include a helmet bag? Yes. A helmet bag is included with the standard configuration. Can the Stilo ST6 GT ZERO be used in professional racing? Yes. The helmet is FIA 8860-2018 homologated and designed for professional motorsport applications. Always verify current event-specific requirements. Why Choose the Stilo ST6 GT ZERO Carbon Fiber Racing Helmet? The Stilo ST6 GT ZERO FIA 8860-2018 combines ultra-lightweight carbon fiber engineering, advanced aerodynamics, improved ventilation, exceptional downward visibility, and an innovative dual-locking visor system. For professional GT, endurance, and high-level motorsport drivers, the ST6 GT ZERO delivers one of Stilo's most advanced combinations of protective performance, driver comfort, and weight-saving technology. Experience the next generation of Stilo racing helmet innovation with the ST6 GT ZERO Carbon Fiber 8860-2018 Racing Helmet.

Sparco Stint Driver Race Suit Sparco Stint Driver Race Suit – SFI-Certified Protection, Premium Comfort, and Pro Style on a Budget Chase victory without breaking the bank in the Sparco Stint Driver Race Suit, the ultimate budget race suit for serious drivers who value safety, style, and performance. Designed for both amateur and club-level racers, the Stint combines two-layer SFI 3.2/5A homologated fire protection with breathable comfort and bold Sparco styling—delivering professional-grade performance at an unbeatable price. Constructed with a lightweight Nomex® outer layer and a soft aramidic inner lining, the Stint race suit is engineered to resist heat while keeping you cool under pressure. Ergonomic, pre-curved sleeves and strategically placed stretch panels ensure freedom of movement in the cockpit, while moisture-wicking fabrics keep you dry through long stints. Whether you're a weekend warrior or an aspiring pro, the Sparco Stint Race Suit offers best-in-class value without sacrificing quality or certification. Sparco Stint Driver Race Suit Highlights SFI 3.2/5A certified driver race suit for fully sanctioned motorsport use Two-layer Nomex® and aramidic construction for fire protection and breathability Ergonomic pre-curved arms and stretch panels for driving comfort and flexibility Bootcuff leg construction for maximum style Lightweight, moisture-wicking materials keep you cool during long sessions Bold styling and three colorways to stand out in the paddock and on the podium Sparco Stint Race Suit Details: SFI 3.2A/5 approved Two-layer construction Nomex outer layer, soft Aramidic inner liner Pre-curved arms for comfort  Boot-cuff pant leg   Sparco Stint Driver Race Suit FAQ's Q: Is the Sparco Stint race suit SFI certified? A: Yes, the Stint is SFI 3.2/5A homologated, making it legal for use in most national and international racing series. Q: What materials are used in the Stint suit? A: It features a two-layer construction: a durable Nomex® outer shell and a soft, breathable aramidic inner liner for comfort and heat resistance. Q: Is this a good race suit for drivers on a budget? A: Absolutely. The Stint is considered one of the best-value driver race suits on the market, offering high-end features at a low price point. Q: How comfortable is the Sparco Stint for long races? A: Very. It’s designed with pre-curved sleeves and breathable fabrics to reduce fatigue and keep you cool and focused throughout your stint. Q: What sizes and color options are available? A: The Stint is offered in a wide range of adult sizes and three color combinations to suit your style and team colors. Q: How does it compare to other low-cost race suits? A: Unlike many entry-level fire suits, the Stint uses Nomex instead of cotton blends, offering better protection and breathability.