all

CMS Performance Bolt-In Harness Bar For C8 Corvette This Harness Bar Fits the Following Cars: Chevrolet Corvette Stingray & Z51 (C8) 2020+ Chevrolet Corvette Z06 (C8) 2023+ Does not fit the Convertible / Roadster The Best Harness Bar in the World for the C8 The C8 Corvette is an incredible, affordable track-day car that easily achieves race car performance on track. Managing that kind of performance wearing nothing but the three-point seat belt is a chore and leaves a lot to be desired in terms of safety. That's where we come in with the CMS Performance C8 Corvette Harness Bar. This provides a rock-solid, high-strength bar to mount shoulder straps for a 4-, 5-, or 6-point racing harness to keep you firmly and safely in your seat. The CMS Performance C8 Harness Bar is the strongest, most elegantly designed C8 harness bar on the market. It seamlessly integrates into your C8 interior, and we custom powder coat it whatever color you choose, including factory color-matched hues. The CMS C8 bar allows full seat travel while locating your harness shoulder belts at the proper height for maximum on-track safety and security. Installation requires no drilling or other modification of the chassis, and only minor modification of your interior trim. Click Here For Installation Instructions Engineered. Fabricated. Powder Coated. All Under One Roof. CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving. The C8 Corvette Harness Bar Made in America Every CMS harness bar is handcrafted in America by master fabricators for a perfect fit, beautifully 360o TIG welded for high strength, and fully powder-coated in our facility for a brilliant, durable finish. And there's no extra charge for custom colors. CMS operates a complete powder-coating facility to offer you color-matched Corvette factory colors1, giving your C8 a customized look that will last. CNC mandrel bent and fully 360º TIG welded from premium Docol R8 Advanced High-Strength Steel (stronger than 4130 CrMo or DOM) and finished in rich powder-coat. Complete, detailed instructions make installation pretty simple (figure about an hour if you're reasonably handy). Installation requires modifying the two lock/seat belt trim panels and the upper trim of your center console. Our installation instructions also include cutting templates should you decide to modify your existing trim. Add Harnesses To Complete Your Safety Upgrade Add optional four-point Schroth Profi II ASM or Sabelt Steel Series harnesses along with the CMS Performance Harness Install Kit, and you're ready to hit the track with greatly improved driver and passenger safety. These harnesses were specifically designed for use in street cars with no sub strap pass-through in the seat. CMS Performance C8 Corvette Harness Bar Details Materials: 1.50″ x .095" Docol R8 Advanced High-Strength Steel for superior safety Construction: Full 360o TIG welding for ultimate strength, integrity, and beauty Finish: Custom-color powder coating in any color you can imagine Weight: 18 lbs. (8.2 kg) Features: Unobstructed rear view; designed, built, and finished in the USA; allows full seat travel with any seat Comes with all necessary hardware 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car. This product is intended for off-road race track use only.

Sparco 6 Point 3" Competition Pull Down Steel Racing Harness (2029 Expiry) When you’re pushing the limits on track, your harness is your lifeline. The Sparco 6-Point Competition H-3 PD Racing Harness is engineered to keep you secure, focused, and in control through every braking zone and corner. The Sparco FIA H-3 Competition 6-Point Steel Racing Harness boasts 3" shoulder straps, 2" lap and sub belts, an aluminum camlock, and Steel adjusters. The snap-in hardware and eyebolts included with the six mounting points facilitate a simple installation process. Its professional aircraft-style camlock buckle guarantees effortless belt engagement, while the steel adjusters allow for easy adjustments. Whether you're chasing tenths in time attack or racing wheel-to-wheel, this FIA-approved harness is built for serious performance and protection. Why Choose the Sparco Pull Down Steel Racing Harness? 6-Point Design: Helps keep the driver stable and secure under braking and cornering loads. 3" FHR Shoulder Straps: Designed for use with HANS and other FHR devices. 2" lap and sub strap belts Aluminum Buckle: Lightweight quick-release design for fast exit. Steel Adjusters: Durable hardware for a secure fit. Pull-Down Abdominal Adjusters: Easy tightening and adjustment. Snap Hooks and Compact T-Bar: Secure attachment and straightforward installation. Sparco Pull Down Steel Racing Harness Specifications Type: 6-Point Racing Harness Strap Width: 3" FHR-specific Material: High-strength webbing with aluminum and steel components Adjusters: High-resistance steel with pull-down abdominal adjustment Attachment: Snap hooks with compact T-bar FIA Certification: HOM. NO: SH.076.20-T-6 Sparco Pull Down Steel Racing Harness FAQs Is this harness FIA approved?Yes. It carries FIA HOM. NO: SH.076.20-T-6 certification for competition use. Can I use it with a HANS device?Yes. The 3-inch shoulder straps are designed for FHR compatibility. How does it install?The harness uses snap hooks for easy mounting. Reinforced eye-bolt anchors are recommended for custom installations. Is it suitable for endurance racing?Yes. The pull-down adjusters and compact T-bar help maintain comfort and alignment during long sessions. Lock In. Stay Safe. Drive Faster. The Sparco 6-Point Competition H-3 PD Racing Harness delivers FIA-approved protection, secure fitment, and race-ready confidence for serious drivers.

Schroth Enduro 2x2 Six-Point Racing Harness Endurance racing drivers need to be able to get in and out of the race car quickly and efficiently. On top of Schroth's legendary quality and durability, the Enduro 2x2 Racing Harness uses their latest, most innovative technology to ensure ease of use during quick driver changes in the most arduous circumstances. The Schroth Enduro 2x2 Racing Harness is considered the fastest, easiest harness to use among many drivers. It has been tested for quality and ease of use in the WEC endurance series and in 24-hour races at legendary venues like Germany’s Nürburgring Nordschleife (known as the "Green Hell"). The Pinnacle of Driver Restraint Technology The Schroth Enduro 2x2 Racing Harness sits at the top of the harness industry, constructed for racers who need top-level driver restraint technology. The newest design of Schroth's ZIP adjuster is integrated into the lap belts, perfectly positioning the adjusters for quick, precise tightening. The Schroth Enduro 2x2 Racing Harness also has ZIP adjusters on the shoulder belts, along with clearly marked release straps and extra large hand loops on the lap belts. The recently updated Enduro 2x2 Cam Lock now features Latch Guides, making low light driver changes even easier! All of this makes tightening or releasing the harness much smoother and more efficient, a huge plus when time is of the essence. And it makes the Schroth Enduro 2x2 Racing Harness the first choice for racing schools and corporate ride-alongs where transitioning customers in and out of the race car means more drivers per session! The Schroth Enduro 2x2 Racing Harness is available in either Black or Red. Check out Schroth's Harness Installation Checklist for advice and tips on proper racing harness installation and use. Schroth Enduro 2x2 Racing Harness Details Manufacturer: Schroth Manufacturer part no.: SR 94510 FIA certified ZIP adjusters in shoulder belts ensure an excellent fit Simple and easy-to-use ZIP adjusters integrated into the lap belt latches Extra large, easy-to-grab hand loops on the shoulder belts Sewn-in bungee loops on the shoulder belts Two-inch (50mm) lap belts provide superior safety and comfort Patented RFR lightweight buckle Included Hardware: (6) SG23 eyebolts (7/16 in.) (12) S3 washers (2) SG39 reinforcement plates

Sparco RW-4 Nomex Socks The Sparco RW-4 line of undergarments are designed to provide both comfort and protection. These RW-4 mid-calf socks feature the soft-touch interlock fabric that characterizes the whole Sparco RW-4 line. This ensures the socks are lightweight, breathable, and super comfortable, while the Nomex construction makes them fire-retardant and anti-static. The Sparco RW-4 line of racing underlayers offers long-lasting protection when it matters most. Sparco RW-4 Nomex Socks Details Manufacturer: Sparco Manufacturer part no.: 001516BI Soft and comfortable Regular fit Sized in European shoe sizes (see chart below to convert to US shoe sizes) FIA 8856-2018 approved

OMP ONE EVO Nomex Pants The OMP One Evo is a top-of-the-line underwear pants made with a comfortable fire retardant seamless fabric. The high breathability fabric inserts "3D cube" on main perspiration areas ensures the best comfort and a perfect fitting (3D Dry System Technology). Updated to meet the latest FIA 8856-2018 standard, the OMP ONE Series of fire-retardant underwear is designed to work together with OMP's Dry System Suits to allow for maximum cooling regardless of the heat. The ultra-lightweight ONE pants features 3D knitted inserts strategically placed to optimize body cooling. These high breathability inserts align with the breathable inserts of OMP's ONE and Tecnica Evo lines of fire suits, comprising the OMP DRY SYSTEM. The slim/athletic cut of the OMP ONE EVO pants allows for a smooth, comfortable fit under your fire suit and improves moisture wicking to keep you dry and cool. Ultra flat anti-rubbing seams are used throughout to keep you comfortable during even the longest stints. OMP ONE EVO Nomex Pants Features FIA 8856-2018 Homologation OMP Dry System aligning cooling panels of underlayers and ONE or Tecnica Evo fire suits Ultra-flat seams throughout Single smooth layer of aramidic fabric for ultra lightweight comfort

Forgeline Motorsport Series WheelsPorsche 991 GT3 Track Package This Forgeline Wheels Package Fits The Following: Porsche 991.1 GT3 (2014-2016) Porsche 991.2 GT3 (2018-2019) The Easy Way to Buy Forgeline Wheels for Your Porsche The best way to get Forgeline wheels for your Porsche 991 GT3 is in the Competition Motorsport dedicated track package. We have sold hundreds of Forgelines for the Porsche 991 GT3, and we boiled all of that experience with offsets, wheel sizes, brake and fender clearance, ABS functionality, etc., into this easy to use Track Package for the 991 GT3. Competition Motorsport is taking the guesswork out of upgrading to Forgeline wheels. Forgeline Motorsport Series lightweight forged racing wheels are engineered for race cars and dedicated track duty, although they are also excellent for everyday driving. Forgeline wheels are machined from billets of forged 6061-T6 aluminum and include features like I-beamed spokes, deeply-machined centers, and aggressive load ratings that make them extremely strong, stiff, and lightweight.Simply choose your wheel style and finish (Standard or Premium) and we'll get your Forgeline Motorsport Series wheels started.1  It's that easy! What Is Included in the Forgeline Wheels Track Package The base price includes two front and two rear Forgeline Porsche center lock wheels finished in any standard powder coat color. Also included are knurled tire beads to keep tires from slipping around the rims. (Tires get hot; it happens!) The Competition Motorsport Forgeline Wheels Track Package for the Porsche 991 GT3 is built around the Forgeline GE1R, GS1R, NW105, and VX1R racing wheels. We've found these to be extremely popular with GT3 owners and complementary to the 991 GT3's styling. Of course, if you prefer another style of Forgeline Wheels or you just have questions, talk to one of our Forgeline specialists at (844) 438-7244. They will get you set up with a Forgeline Wheels Track Package that's precisely tailored to your needs. Forgeline GE1R Wheel Eight-spoke Forgeline GE1R wheels represent the latest in advanced wheel technology for the Porsche 991 GT3. With one-piece forged monoblock construction, motorsport-engineered design, and I-beamed spokes and spans, it combines head-turning good looks with race-ready strength and durability. Forgeline GS1R Wheel Originally designed for professional racing teams in the IMSA Continental Tire SportsCar Challenge, the Forgeline Wheels GS1R combines advanced wheel technology with motorsport-engineered design. From its one-piece forged monoblock construction and I-beamed spokes to its 2100-lb. street-tire load rating, the GS1R is fully engineered to withstand the rigors of top-level endurance racing. Forgeline NW105 Wheel Forgeline NW105 racing wheels are one-piece forged monoblock wheels designed specifically for the Porsche 991 GT3. The Forgeline NW105 combines cutting-edge race engineering and sleek aesthetics to enhance the overall performance and appearance of the 991 GT3. A key aspect of the Forgeline NW105 is its bold, seven-spoke layout with tapered angular spokes strategically designed to optimize airflow and enhance brake cooling. Forgeline Wheels VX1R With a load rating suitable for dedicated track duty, the Forgeline VX1R racing wheel was engineered for beauty and braun! It's a fully track-ready competition wheel equal in strength to Forgeline's benchmark GS1R competition wheel. The VX1R features a sharp Y-spoke design with long spokes flowing into the center lock. The Forgeline Wheels VX1R is one of the most popular racing wheels for the Porsche GT3. Forgeline Wheels Offers Amazing Finishes for the Porsche GT3 Forgeline Wheels can be finished many beautiful and durable standard colors at no extra charge. Or, upgrade to one of several premium machined or brushed finishes available for your Forgeline Wheels Track Package. Combined with clear or tinted-clear powder coats, you can create a truly stunning customized look for your 991 GT3. Notes... 1 Forgeline Motorsport Series wheels for the Porsche 991 GT3 are custom made to order. Lead time for Forgeline Wheels is typically three to five weeks. Competition Motorsport carries a large inventory of Forgeline Wheels for Porsche fitments on-hand. We may have what you are looking for in stock and ready for immediate shipment. Feel free to give us a call at (844) 438-7244 to discuss lead time for your Forgeline Track Package.

Ferodo FCP4664 Porsche Front Brake Pads Ferodo FCP4664 Front Brake Pad Fitment: Make Model Build (Year) Front Rear Porsche 991 GT3 [iron brakes] 14 - 16 X Porsche 991 GT3 RS [iron brakes] 16 X Porsche 991 Turbo [iron brakes] 13 - X Porsche 991 Turbo S [iron brakes] 13 - X Porsche 991.2 GT3 [iron brakes] 18 - 19 X Porsche 991.2 GT3 RS [iron brakes] 19 X Porsche 991 911 Speedster [iron brakes] 19  X Porsche 992 3.0 Carrera S [iron brakes] 20 - X Porsche 992 3.0 Carrera 4S [iron brakes] 20 - X Porsche 718 Cayman GT4 4.0 [982] [iron brakes] 19 - X Porsche Cayman GT4 [981] 16 - X Porsche 718 Cayman GTS 4.0 [982] [iron brakes] 2016 X Porsche 992 Turbo [iron brakes] 2020 - X Porsche 992 GT3 [iron brakes] 2022 - X Porsche 718 Cayman GT4RS [iron brakes] 23 - X Designed for use with iron brake rotors only. Not for use with carbon-ceramic rotors. Ferodo DS3.12 Brake Compound Details The DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Ferodo DS1.11 Brake Compound Details The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. Ferodo DSUNO Brake Compound Details For our customers who enjoy the performance of the DS1.11, but just want a little more bite, we recommend the DSUNO. It doesn't wear quite as long as the DS1.11, but it does offer a higher overall mu once it reaches track temperatures. Ferodo DS2500 Brake Compound Details Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat. Ferodo FCP4664 Comparison Chart Out of all the pad compounds we've ever tested, from all manufacturers, the Ferodo DS3.12 shows the flattest torque curve across the broadest temperature range. That means on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu (µ) than Ferodo's other compounds, so not as much pedal pressure is required to initiate the desired response. It is also un-fadable, showing no drop in performance at any temperature your brakes will ever see. Ferodo FCP4664 Coefficient of Friction (Mu) Comparison Chart In dyno testing, the Ferodo DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to brake rotors. We believe the Ferodo DS3.12 will become the gold standard by which other race compounds will be judged. Ferodo FCP4664 Operating Temperature Comparison Chart Porsche 991 GT3 Brake Pads, Porsche 991 Turbo Brake Pads, Porsche 981 GT4 Brake Pads, Porsche 718 GTS 4.0 Brake Pads, Porsche 991.2 GT3 Brake Pads, Porsche 991.2 GT3 RS Brake Pads, Porsche 718 GT4 RS Brake Pads, Porsche 992 GT3 Brake Pads, Ferodo FCP4664

Sparco RW-4 Nomex Balaclava The RW-4 line of undergarments are designed to provide both comfort and protection. The RW-4 features a soft-touch interlock fabric. The RW-4 line is FIA 8856-2018 approved.   The balaclava offers superior breathability and durability, so it can be worn under the harshest racing conditions. Its design also ensures a comfortable fit, making it ideal for long-term wear.SPARCO RW-4 NOMEX BALACALVA TECHNOLOGYSoft and comfortableRegular FitFIA 8856-2018 Approved

Sparco Air & Sky Replacement Shields The Sparco visor shields for the Air Pro and Sky helmets are constructed from strong, lightweight polycarbonate which provide distortion-free vision. The shields are available in dark smoke, silver iridium and blue iridium which enhance your vision during bright sunlight conditions. Clear replacement shields are also available. These Sparco visor shields will fit the Sparco Prime RF-9W, Sky RF-7W and Air Pro RF-5w full face helmets. Note: the Iridium Red and Yellow shields are not FIA approved.

Sparco Futura Racing Gloves The Sparco Futura Racing Gloves combine certified fire-resistant protection, dependable steering-wheel grip, and Sparco Full Efficiency regenerated fabric technology. Designed for competitive auto racing, the Futura offers a comfortable anatomical fit with breathable construction and hybrid finger stitching. The fingers use a combination of internal and external seams to balance durability with interior comfort. A printed silicone palm provides secure steering-wheel traction while preserving the sensitivity and dexterity required for precise vehicle control. Available in four colorways and sizes 8 through 13, the Sparco Futura is approved to FIA 8856-2018 and SFI 3.3/5 standards. Sparco Full Efficiency Regenerated Fabric The Sparco Futura is constructed with Sparco Full Efficiency fabric, a regenerated textile technology developed to reduce manufacturing waste while maintaining the performance required for motorsport use. Excess textile material that would normally be discarded is recovered and processed into regenerated fibers. Sparco then uses proprietary spinning and weaving techniques to create new racing apparel materials within a more controlled production cycle. The Full Efficiency program targets a minimum of 51 percent regenerated material within applicable production while preserving the comfort, protection, and durability expected from Sparco racing equipment. Breathable Upper Construction A breathable upper helps manage heat and moisture inside the glove during demanding driving sessions. The flexible construction allows the glove to move naturally as the driver grips and releases the steering wheel. This combination of airflow and flexibility helps improve comfort during qualifying laps, sprint races, endurance events, and extended track sessions. Hybrid Finger Stitching The Sparco Futura uses hybrid finger stitching that combines internal and external seams. External stitching is placed in areas where interior seam pressure could affect comfort, while internal stitching helps protect selected seams from abrasion and wear. This construction creates a close, responsive fit while helping reduce pressure points around the fingers during prolonged steering-wheel contact. Printed Silicone Palm Grip Printed silicone across the palm provides dependable traction against the steering wheel. The low-profile grip surface improves control without adding unnecessary thickness between the driver's hands and the wheel. Enhanced palm traction allows the driver to maintain control with less gripping pressure, which can help reduce hand fatigue during longer races and repeated driving sessions. Anatomical Racing Fit The Sparco Futura follows the natural shape of the hand for a close, ergonomic fit. Its streamlined construction reduces excess material while supporting the dexterity needed to operate paddle shifters, steering-wheel buttons, switches, and other cockpit controls. FIA and SFI-Approved Protection The Sparco Futura Racing Gloves are approved to FIA 8856-2018 and SFI 3.3/5 standards. These certifications make them suitable for many professional, amateur, club-level, endurance, rally, and road-racing applications. Drivers should confirm the required certification with their racing organization or sanctioning body before competition. Sparco Futura Racing Glove Features Fire-resistant auto-racing glove construction Made with Sparco Full Efficiency regenerated fabric Breathable upper helps manage heat and moisture Hybrid internal and external finger stitching Comfort-focused seam placement reduces pressure points Printed silicone palm provides secure steering-wheel grip Close anatomical fit improves dexterity and control Designed for sprint and endurance racing Available in four colorways Available in sizes 8 through 13 FIA 8856-2018 approved SFI 3.3/5 approved Sparco Futura Racing Glove Specifications Manufacturer: Sparco Model: Futura Product Type: Auto Racing Gloves Material: Full Efficiency regenerated fire-resistant fabric Upper: Breathable construction Palm: Printed high-grip silicone Seams: Hybrid internal and external stitching Available Sizes: 8–13 Available Colorways: Four Homologation: FIA 8856-2018 and SFI 3.3/5 Ideal for Multiple Motorsport Applications The Sparco Futura Racing Gloves are suitable for a wide range of competitive and performance-driving applications, including: Circuit racing Endurance racing Sprint racing Sports-car competition Touring-car racing Rally and time trials Autocross Driver instruction HPDE and performance track driving Why Choose Sparco Futura Racing Gloves? The Sparco Futura combines environmentally conscious material technology with the protection and performance required for competition. Its Full Efficiency regenerated fabric helps reduce textile waste, while the breathable upper and hybrid stitching provide comfort during demanding driving sessions. A printed silicone palm delivers dependable steering-wheel grip and precise feedback. For drivers seeking FIA and SFI-approved racing gloves with modern construction and a reduced-waste manufacturing approach, the Sparco Futura is a strong choice. Sparco Full Efficiency Technology Proprietary regenerated textile technology Life Cycle Assessment certification supports the development process Controlled textile supply chain Innovative spinning and weaving of regenerated fibers Manufacturing process developed toward a zero-waste target At least 51 percent of applicable production uses regenerated materials Sparco Futura Racing Glove Size Chart Frequently Asked Questions Are the Sparco Futura Racing Gloves FIA approved?Yes. The Sparco Futura is approved to the FIA 8856-2018 standard. Are the Sparco Futura Gloves SFI approved?Yes. They are also approved to the SFI 3.3/5 standard. What is Sparco Full Efficiency technology?Full Efficiency is Sparco's regenerated textile program that recovers excess material and converts it into new fibers using specialized spinning and weaving processes. What does hybrid finger stitching mean?Hybrid stitching combines internal and external seams to balance comfort, durability, and reduced pressure around the fingers. What type of grip is used on the palm?The palm features printed silicone designed to improve steering-wheel traction and control. Are the Sparco Futura Gloves breathable?Yes. The upper construction is designed to improve airflow and help manage heat during extended driving sessions. What sizes are available?The Sparco Futura Racing Gloves are available in sizes 8 through 13. How many colorways are available?The Sparco Futura is offered in four colorways. Are these gloves suitable for endurance racing?Yes. Their breathable upper, hybrid seams, anatomical fit, and silicone palm grip make them well suited for longer driving sessions. How should Sparco Futura Racing Gloves fit?They should fit closely around the hands and fingers without restricting movement or creating uncomfortable pressure at the fingertips.

Sabelt Steel Side Mount Brackets For use mounting most side mount racing seats. Sabelt Steel Side Mount Bracket Details Manufacturer: Sabelt  Manufacturer part no.: Z200087 Material: 3mm steel Finish: painted black Homologation: FIA compliant Bolt pattern: 290mm (11.4 in.) Standard length

Chillout Pro Sport SFI 3.3 Rated Fire-Resistant Balaclava Engineered for serious racers, the Chillout Pro Sport Single Layer Balaclava delivers SFI 3.3-rated fire resistance with advanced thermal regulation. Whether you're on the grid for a sprint or endurance event, this balaclava is designed to keep you cool, focused, and protected. Unmatched Cooling, Comfort, and Protection The Chillout Pro Sport underlayers are revolutionizing motorsports with thermal-regulating materials that can reduce skin temperature by up to 8°F—enhancing reflexes and reducing fatigue under pressure. Ultralight fabrics maximize airflow to keep you cool in the heat of competition. Woven with antibacterial technology, this balaclava neutralizes 99% of odor-causing bacteria, keeping you fresh during the longest stints. SFI Certification: 3.3 Compliant Sizes: One Size Fits Most Color Options: Black, Charcoal, White Material Composition: 42% M-Aramide, 42% Viscose FR, 16% EA Usage and Safety Guidelines Ensure a proper fit for optimal protection. The neck, wrists, and ankles must always be covered by at least two layers of fire-resistant gear. Overlap between balaclava and top underlayers must be a minimum of 3cm (1.2"), and 8cm (3.2") at the front center. Overlap between top and bottom garments must be at least 7cm (2.8"). Maintenance Tips Follow label instructions for cleaning and ironing. Avoid extended sunlight exposure, which can prematurely age materials and alter colors. Replace garments showing wear or damage. Minor repairs must use original materials. Chillout Systems assumes no responsibility for damage due to misuse or incorrect maintenance. European Certification This balaclava complies with EEC Directive 89/686 and meets essential health and safety standards. Certified by CSI S.p.a. (No. 0497) with routine production audits conducted by the certification body.

Stilo Crown Pads Replacement crown pads for Stilo ST5 / ST5.1 helmets help you customize your helmet to provide the perfect fit!

Trac-Com Chaser Adapter Cables Introducing the Trac-Com Chaser Adapter Cables, the perfect accessory for your Trac-Com Chaser system. These adapter cables feature a locking 5-pin connector that easily plugs into the Trac-Com intercom base unit (available separately or as a kit). With a cable length of five feet, you'll have plenty of room to move around without feeling restricted. These premium-quality cables are proudly manufactured and tested in the USA, ensuring top-notch performance and durability. You can choose from either male (Stilo) or female (IMSA/Roux) cable ends, depending on your helmet connector type. Each cable is priced individually, so you can purchase as many as you need for your specific setup. Upgrade your Trac-Com Chaser system with these reliable and high-quality adapter cables. Don't settle for anything less than the best when it comes to your racing equipment. Order yours today and experience the difference!

Sparco Eagle 2.0 Race Suit Single-Layer Construction, Multi-Layer Performance The Sparco Eagle 2.0 Race Suit is the newest evolution of Sparco’s professional Eagle driver suit. Built with updated HOCOTEX® material that is softer and 30% thinner than before, the Eagle 2.0 delivers premium comfort, advanced fire protection, and modern FIA-approved performance in a lightweight single-layer design. With four new colorways, large stretch zones, 360-degree arm gussets, and improved breathability, the Eagle 2.0 is designed for serious racers who want maximum mobility without giving up protection. HOCOTEX Technology: Single Layer, Serious Protection The Eagle 2.0 is the result of more than three years of research and development. Sparco’s patented HOCOTEX® technology changes the way racing suits are built by creating a single-layer fabric that delivers the protective performance normally associated with multi-layer construction. Instead of relying on traditional quilted layers, HOCOTEX® uses a honeycomb structure with internal air cells. This design helps improve thermal protection while reducing bulk, weight, and restriction. Unprecedented Comfort And Breathability Thanks to HOCOTEX®, the Sparco Eagle 2.0 is three times more breathable than a suit made with traditional technology. The thinner fabric construction works with large side and back stretch panels to give drivers excellent comfort in the car. The Eagle 2.0 also features full 360-degree arm gussets for improved range of motion. Sparco’s new Eagle stretch fabric is lighter, more breathable, and more abrasion resistant than traditional stretch material, giving the suit better comfort and durability in high-movement areas. Improved Fire And Heat Resistance Traditional racing suits use multiple fabric layers sewn together in a quilted pattern, creating air spaces that expand during fire exposure to help protect the driver. HOCOTEX® takes a different approach with a honeycomb microcell structure that creates thousands of internal air chambers throughout the suit. While a traditional size 52 race suit may have around 300 air chambers, the Sparco Eagle 2.0 has more than 60,000 microcell air chambers. This structure helps deliver a 10 to 12 percent increase in heat protection performance while keeping the suit thin, light, and highly breathable. Sparco Eagle 2.0 Driver Race Suit Details FIA 8856-2018 homologated Single-layer construction with multi-layer protection Updated softer HOCOTEX® material Material is 30% thinner than the previous version 3X more breathable than a standard race suit Full 360-degree arm gussets for improved mobility Large stretch panels on the sides and back New breathable Eagle stretch fabric Reinforced arms and legs with anti-abrasive material More than 60,000 microcell air chambers Improved heat protection performance Patented Sparco HOCOTEX® technology Made in Italy Available in four colorways Developed through more than three years of research and development Why Choose The Sparco Eagle 2.0 Race Suit? The Sparco Eagle 2.0 Driver Race Suit is ideal for racers who want premium FIA-approved protection in a lightweight, highly breathable package. Its HOCOTEX® single-layer construction reduces bulk while delivering advanced thermal protection, and its large stretch panels help the suit move naturally in the driving position. For drivers who prioritize comfort, safety, and professional-level mobility, the Eagle 2.0 is one of Sparco’s most advanced race suits. Sparco Eagle 2.0 Driver Race Suit Sizing Chart Frequently Asked Questions Q: Is the Sparco Eagle 2.0 FIA approved?A: Yes. The Sparco Eagle 2.0 Race Suit is FIA 8856-2018 homologated. Q: What is HOCOTEX®?A: HOCOTEX® is Sparco’s patented single-layer fabric technology that uses a honeycomb microcell structure to provide multi-layer-style protection with less bulk. Q: Is the Eagle 2.0 a single-layer suit?A: Yes. The Eagle 2.0 uses single-layer construction while delivering protective performance normally associated with multi-layer suits. Q: How breathable is the Sparco Eagle 2.0?A: The Eagle 2.0 is three times more breathable than a suit produced with traditional technology. Q: Does the Eagle 2.0 have stretch panels?A: Yes. It has large stretch panels on the sides and back, plus 360-degree arm gussets for improved flexibility. Q: What makes the Eagle 2.0 more heat resistant?A: Its HOCOTEX® honeycomb structure creates more than 60,000 microcell air chambers, helping improve heat protection performance. Q: How many colorways are available?A: The Sparco Eagle 2.0 is available in four colorways. Q: Is the Sparco Eagle 2.0 made in Italy?A: Yes. The Eagle 2.0 uses patented Sparco HOCOTEX® technology made in Italy.