Pagid Racing 8222 Brake Pads
from $817.17
Pagid Racing Brake Pad Shape 8222
Pagid Racing shape 8222 brake pads are engineered for demanding motorsport and high-performance braking applications. 25 mm endurance/sprint racing pad shape for multiple AP Racing and Alcon six-piston calipers.
Pagid Racing 8222 Brake Pad Fitment Guide
Make / Caliper
Type / Application
Remarks
Shape No.
AP Racing
CP6080 / CP6210 / CP6230 / CP6269 / CP9665
25 mm
8222
Alcon
Applicable 6-piston racing calipers
25 mm
8222
KTM
X-Bow GT4 – front
25 mm
8222
Pagid Racing brake pads are designed to deliver consistent stopping power, modulation, fade resistance, and dependable pedal feel under severe track conditions. Select the compound that best matches your vehicle, brake system, and intended use.
Pagid Racing compounds are intended for steel/cast-iron rotors unless the selected compound is specifically engineered for ceramic composite brake discs, such as RSC compounds.
Pagid Racing 8222 RSL 1 Compound
RSL 1 is a high-friction endurance compound with strong heat resistance, consistent friction across a wide temperature range, good modulation, and low pad and disc wear.
Pagid Racing 8222 RSL 2 Compound
RSL 2 is an endurance compound with medium-high friction, stable performance across a wide temperature range, and strong pad and disc life for applications with efficient brake cooling.
Pagid Racing 8222 RST 1 Compound
RST 1 is a very high-friction sprint and rally compound with strong initial bite, a progressive torque curve, and excellent fade resistance. It is well suited to heavy race cars and applications that require high brake torque.
Pagid Racing 8222 RST 5 Compound
RST 5 is a very high-friction sprint and rally compound designed for exceptional thermal stability, strong recovery, and high initial bite under severe competition use.
Important Fitment Information
Brake pad shape and caliper configuration must be verified before ordering. Vehicle applications can vary by model year, trim, brake package, rotor type, and caliper option. Compare the existing pad shape and dimensions with the listed specifications when necessary.
PAGID 8222 BRAKE PAD FAQ
What is the PAGID Racing shape number for this listing?The brake pad shape is 8222.
Are all compounds suitable for street use?No. Many PAGID Racing compounds are developed specifically for competition and track use. Choose a compound appropriate for your application.
Can these pads be used with ceramic brake rotors?Only compounds specifically designed for ceramic composite discs, such as compatible RSC compounds, should be used on ceramic brake systems.
How do I confirm fitment?Verify the caliper, pad shape, pad dimensions, axle position, and brake package before ordering.
Pagid 4917 Racing Brake Pads
from $748.16
Pagid Racing Brake Pad 4917
Pagid Racing shape 4917 brake pads are engineered for demanding motorsport and high-performance braking applications. Large front pad shape used on select Porsche and Volkswagen high-performance brake systems.
Pagid Racing 4917 Brake Pad Fitment Guide
Make / Caliper
Type / Application
Remarks
Shape No.
Porsche
Cayenne with applicable cast-iron/ceramic brake package – front
16 mm
4917
Porsche
Panamera with applicable brake package – front
16 mm
4917
Volkswagen
Touareg with applicable ceramic brake package – front
16 mm
4917
Pagid Racing brake pads are designed to deliver consistent stopping power, modulation, fade resistance, and dependable pedal feel under severe track conditions. Select the compound that best matches your vehicle, brake system, and intended use.
Pagid Racing compounds are intended for steel/cast-iron rotors unless the selected compound is specifically engineered for ceramic composite brake discs, such as RSC compounds.
Pagid Racing 4917 RSL 29 Compound
RSL 29 is a proven endurance and track-day compound with a medium friction level, excellent modulation, easy bedding, and long pad and disc life.
Pagid Racing 4917 RSC 1 Compound
RSC 1 is a medium-friction racing and track-day compound engineered for ceramic composite brake discs, with good all-around characteristics and disc-friendly behavior.
Pagid Racing 4917 RSC 3 Compound
RSC 3 is a ceramic-disc racing compound for demanding high-performance applications. Use only with compatible ceramic composite brake systems.
Pagid Racing 4917 RSL 1 Compound
RSL 1 is a high-friction endurance compound with strong heat resistance, consistent friction across a wide temperature range, good modulation, and low pad and disc wear.
Important Fitment Information
Brake pad shape and caliper configuration must be verified before ordering. Vehicle applications can vary by model year, trim, brake package, rotor type, and caliper option. Compare the existing pad shape and dimensions with the listed specifications when necessary.
Pagid 4917 Brake Pad FAQ
What is the PAGID Racing shape number for this listing?The brake pad shape is 4917.
Are all compounds suitable for street use?No. Many PAGID Racing compounds are developed specifically for competition and track use. Choose a compound appropriate for your application.
Can these pads be used with ceramic brake rotors?Only compounds specifically designed for ceramic composite discs, such as compatible RSC compounds, should be used on ceramic brake systems.
How do I confirm fitment?Verify the caliper, pad shape, pad dimensions, axle position, and brake package before ordering.
Pagid 8061 Racing Brake Pads
$788.63
Pagid Racing Brake Pad 8061
Pagid Racing shape 8061 brake pads are engineered for demanding motorsport and high-performance braking applications. Racing brake pad shape for the Brembo XA5.71.M2 six-piston caliper.
Pagid Racing 8061 Brake Pad Fitment Guide
Make / Caliper
Type / Application
Remarks
Shape No.
Brembo
XA5.71.M2 6-piston D48 caliper
16.8 mm
8061
Pagid Racing brake pads are designed to deliver consistent stopping power, modulation, fade resistance, and dependable pedal feel under severe track conditions. Select the compound that best matches your vehicle, brake system, and intended use.
Pagid Racing compounds are intended for steel/cast-iron rotors unless the selected compound is specifically engineered for ceramic composite brake discs, such as RSC compounds.
Pagid Racing 8061 RSL 29 Compound
RSL 29 is a proven endurance and track-day compound with a medium friction level, excellent modulation, easy bedding, and long pad and disc life.
Pagid 8061 Brake Pad FAQ
What is the PAGID Racing shape number for this listing?The brake pad shape is 8061.
Are all compounds suitable for street use?No. Many PAGID Racing compounds are developed specifically for competition and track use. Choose a compound appropriate for your application.
Can these pads be used with ceramic brake rotors?Only compounds specifically designed for ceramic composite discs, such as compatible RSC compounds, should be used on ceramic brake systems.
How do I confirm fitment?Verify the caliper, pad shape, pad dimensions, axle position, and brake package before ordering.
Sabelt UI-600 Underlayer Package (Regular)
$622.95
Complete Sabelt UI-600 FIA Racing Underwear Package
Get fully equipped with Sabelt's premium UI-600 racing underwear system in one complete package. The Sabelt UI-600 Nomex Racing Underwear Bundle combines the UI-600 slim-fit shirt, slim-fit pants, balaclava, and racing socks for complete FIA 8856-2018 certified fire-resistant protection underneath your racing suit.
Developed for drivers who want maximum comfort without sacrificing protection, the UI-600 collection uses advanced stretch-fit construction and lightweight technical materials to provide exceptional breathability and freedom of movement. The nearly seamless design helps reduce pressure points and irritation during long sessions in the car.
Sabelt combines Lenzing FR fiber with modacrylic and elastane to create an underlayer system that is lightweight, durable, moisture-managing, and highly elastic. The two-way stretch warp-knit construction follows the driver's movements while helping keep the body dry and comfortable during demanding track sessions, sprint races, and endurance events.
What's Included
1x Sabelt UI-600 Slim-Fit Nomex Racing Shirt – FIA 8856-2018 certified lightweight racing underlayer
1x Sabelt UI-600 Nomex Racing Balaclava – FIA 8856-2018 certified stretch-fit head and neck protection
1x Sabelt UI-600 Slim-Fit Nomex Underlayer Pants – FIA 8856-2018 certified lightweight racing underwear
1x Sabelt UI-600 Nomex Racing Socks – FIA 8856-2018 certified fire-resistant racing socks
Sabelt UI-600 Features
FIA Certification: FIA 8856-2018 certified racing underwear system
Complete Driver Underlayer: Includes shirt, pants, balaclava, and socks
Stretch-Fit Construction: Designed to conform closely to the driver's body while maintaining freedom of movement
Nearly Seamless Design: Helps minimize irritation and pressure points inside the racing suit
Breathable Performance: Designed to help manage heat and moisture during demanding driving conditions
Technical Materials: Lenzing FR fiber, modacrylic, and elastane construction
Two-Way Stretch: Warp-knit fabric delivers excellent elasticity and mobility
Lightweight: Built to reduce unnecessary bulk underneath a racing suit
Durable: High wear resistance for repeated motorsport use
Made in Italy: Premium Sabelt motorsport construction
Why Buy the Complete UI-600 Bundle?
A properly equipped driver needs more than just a racing suit. FIA-rated fire-resistant underwear provides an additional layer of protection between the driver and the suit while also improving comfort during long periods in the cockpit.
This bundle makes it easy to build a complete Sabelt UI-600 underlayer system without purchasing each component separately. Choose the appropriate options for the shirt, pants, balaclava, and socks to create your complete racing underwear setup.
Sizing
The UI-600 shirt and pants use Sabelt racing underwear sizing. Select the appropriate size for each garment when configuring your bundle.
Sabelt UI-600 racing socks are sized using European shoe sizes. Select the sock size that corresponds with your normal footwear size.
FIA 8856-2018 Certified Racing Underwear
The Sabelt UI-600 collection is designed for motorsport applications requiring FIA 8856-2018 certified fire-resistant driver apparel. Pair the complete UI-600 underwear system with an FIA-approved racing suit, gloves, shoes, and helmet for a professional motorsport safety setup.
Schroth Harness Adjuster Grips
$17.95
Schroth Harness Adjuster Grips
Schroth's street legal harnesses have loops sewn into the end of each adjusting strap. Schroth Harness Adjuster Grips are customized high-impact plastic dowels that go through those loops, giving you a firmer grip when adjusting the belts. This is especially an advantage when temperatures are high and hands get sweaty, or when you're wearing racing gloves. Schroth Harness Adjuster Grips make it easier to get your harness belts as tight as they should be.
Priced/sold as a set of four, enough for one street legal harness.
Schroth Harness Adjuster Grip Details
Manufacturer: Schroth
Manufacturer part number: 00092
Material: high-impact plastic
Color: black
Contents: four harness adjuster grips
Harness not included.
Bell HP77 Fernando Alonso 1:2 Scale F1 Mini Helmet | Aston Martin 2026 F1 Season
$169.95
Bell Fernando Alonso 2026 F1 Mini Helmet
Celebrate Fernando Alonso’s 2026 Formula 1 season with the Bell HP77 1:2 Scale Fernando Alonso Mini Helmet, a detailed collectible inspired by the helmet worn by Alonso while competing with the Aston Martin Formula One Team.
This half-scale display helmet recreates the unmistakable look of Alonso’s full-size Bell HP77 in a compact collectible format. The 2026 design features his signature blue and yellow Asturias-inspired color scheme, Spanish flag accents, and sharp racing graphics associated with one of Formula 1’s most recognizable drivers.
Handmade using Bell’s specialized mini-helmet manufacturing process, this collectible is designed for Formula 1 fans, Fernando Alonso supporters, motorsport memorabilia collectors, and anyone looking for a premium display piece for an office, shelf, desk, trophy room, or dedicated mini helmet collection.
Key Features
Official 1:2 Scale Replica: Detailed half-scale reproduction of the Bell HP77 Formula 1 helmet.
Fernando Alonso 2026 Design: Inspired by Alonso’s 2026 Aston Martin Formula One Team helmet graphics.
Asturias-Inspired Colors: Features Alonso’s signature blue and yellow color combination.
Spanish Flag Accents: Red detailing pays tribute to Alonso’s Spanish heritage.
Handmade Construction: Produced using Bell’s specialized mini-helmet manufacturing process.
Detailed Interior: Designed to recreate the appearance and character of a full-size racing helmet at half scale.
Display Ready: Ideal for Formula 1 collections, offices, desks, shelves, trophy rooms, and mini helmet display cases.
Presentation Box: Supplied in an individual cardboard presentation box featuring dedicated graphics.
Technical Details
Scale: 1:2 scale
Helmet Model: Bell HP77 replica
Helmet Dimensions: 6.49 x 5.07 x 5.19 in (16.5 x 12.9 x 13.2 cm)
Box Dimensions: 7.09 x 5.31 x 5.51 in (180 x 135 x 140 mm)
Approximate Packaged Weight: 13 oz (355 g)
Materials: Fiber-reinforced plastic, cotton fabric, foam, and hardware
Country of Origin: Kingdom of Bahrain
Manufacturer Part Number: 4100556
Perfect for Formula 1 Collectors
The Fernando Alonso 2026 mini helmet is an excellent addition to any Formula 1 memorabilia collection. Its compact 1:2 scale makes it easy to display while retaining the distinctive graphics and visual details associated with Alonso’s racing helmet.
Whether displayed alongside other Formula 1 mini helmets, driver memorabilia, die-cast models, or Aston Martin collectibles, the Bell Fernando Alonso HP77 mini helmet makes a standout centerpiece for motorsport enthusiasts.
Important Information
This product is a collectible display helmet only. It is not a wearable racing helmet, is not approved for motorsport competition, and is not intended for children under 14 years old.
FAQ
Is this a full-size Fernando Alonso racing helmet?No. This is a 1:2 scale collectible replica of Fernando Alonso’s Bell HP77 Formula 1 helmet.
Is this based on Fernando Alonso’s 2026 helmet?Yes. The graphics are inspired by Alonso’s 2026 Formula 1 season with the Aston Martin Formula One Team.
Can this mini helmet be worn?No. This helmet is designed strictly as a collectible display piece and is not intended to be worn.
Is this helmet certified for racing?No. The mini helmet carries no motorsport safety certification and must not be used for competition or driving.
Does it come with a display box?It is supplied in an individual cardboard presentation box with dedicated graphics.
What are the dimensions of the mini helmet?The helmet measures approximately 6.49 x 5.07 x 5.19 inches (16.5 x 12.9 x 13.2 cm).
Bell HP77 Esteban Ocon 1:2 Scale F1 Mini Helmet | Haas 2026 F1 Season
$169.95
Bell Esteban Ocon 2026 F1 Mini Helmet
Celebrate Esteban Ocon’s 2026 Formula 1 season with the Bell HP77 1:2 Scale Esteban Ocon Mini Helmet, a detailed collectible inspired by the helmet worn by Ocon while competing with the Haas F1 Team.
Ocon’s 2026 helmet design features a bold red finish with crisp white graphics and his signature Eiffel Tower motif across the top. The distinctive styling gives the helmet an unmistakable look while paying tribute to Ocon’s French identity.
Handmade using Bell’s specialized mini-helmet manufacturing process, this collectible recreates the appearance of the full-size Bell HP77 in a compact half-scale format. It is an ideal display piece for Esteban Ocon fans, Haas F1 Team supporters, Formula 1 collectors, and motorsport enthusiasts.
Key Features
Official 1:2 Scale Replica: Detailed half-scale reproduction of the Bell HP77 Formula 1 helmet.
Esteban Ocon 2026 Design: Inspired by Ocon’s distinctive red helmet graphics for the 2026 Formula 1 season.
Bold Red and White Graphics: Features a striking red finish highlighted by crisp white detailing.
Signature Eiffel Tower Motif: Includes one of the most recognizable elements associated with Ocon’s helmet designs.
Handmade Construction: Produced using Bell’s specialized mini-helmet manufacturing process.
Detailed Interior: Designed to recreate the character and appearance of a full-size Formula 1 racing helmet at half scale.
Display Ready: Ideal for Formula 1 collections, offices, shelves, desks, trophy rooms, and dedicated mini helmet display cases.
Presentation Box: Supplied in an individual cardboard presentation box with dedicated graphics.
Technical Details
Scale: 1:2 scale
Helmet Model: Bell HP77 replica
Helmet Dimensions: 6.49 x 5.07 x 5.19 in (16.5 x 12.9 x 13.2 cm)
Box Dimensions: 7.09 x 5.31 x 5.51 in (180 x 135 x 140 mm)
Approximate Packaged Weight: 13 oz (355 g)
Materials: Fiber-reinforced plastic, cotton fabric, foam, and hardware
Country of Origin: Kingdom of Bahrain
Manufacturer Part Number: 4100565
Perfect for Formula 1 Collectors
The Esteban Ocon 2026 mini helmet is a distinctive addition to any Formula 1 memorabilia collection. Its compact 1:2 scale makes it easy to display while retaining the bold red graphics and signature design elements associated with Ocon’s race helmet.
Whether displayed alongside other Formula 1 mini helmets, Haas F1 Team memorabilia, die-cast models, or Esteban Ocon collectibles, this Bell HP77 mini helmet makes a standout display piece for motorsport enthusiasts.
Important Information
This product is a collectible display helmet only. It is not a wearable racing helmet, is not approved for motorsport competition, and is not intended for children under 14 years old.
FAQ
Is this a full-size Esteban Ocon racing helmet?No. This is a 1:2 scale collectible replica inspired by Esteban Ocon’s Bell HP77 Formula 1 helmet.
Is this based on Esteban Ocon’s 2026 helmet?Yes. The design is inspired by Ocon’s 2026 Formula 1 season with the Haas F1 Team.
Does the helmet include Ocon’s Eiffel Tower design?Yes. The helmet features Ocon’s recognizable Eiffel Tower motif across the top as part of the 2026 graphics.
Can this mini helmet be worn?No. This helmet is designed strictly as a collectible display piece and is not intended to be worn.
Is this helmet certified for racing?No. The mini helmet carries no motorsport safety certification and must not be used for competition or driving.
What are the dimensions of the mini helmet?The helmet measures approximately 6.49 x 5.07 x 5.19 inches (16.5 x 12.9 x 13.2 cm).
Chillout Systems IceBox Maintenance Formula
$40.00
Chillout Systems IceBox Maintenance Formula
Keep your personal driver cooling system clean, lubricated, and performing at its best with Chillout Systems IceBox Maintenance Formula. Designed for the Chillout IceBox and other personal ice-based cooling systems, this specialized additive helps remove damaging residue and mineral buildup from critical internal components.
Regular use lubricates the pump, valves, and cooling lines while helping inhibit corrosion throughout the system. Chillout Systems recommends adding the Maintenance Formula with every fill to maintain consistent cooling performance and help extend the life of your equipment.
Key Features
Helps remove residue and mineral buildup
Lubricates the pump, valves, and cooling lines
Helps inhibit corrosion inside the cooling system
Supports consistent cooling-system performance
Designed for the Chillout IceBox and other personal ice-based cooling systems
Biodegradable formulation
Resealable stand-up pouch for convenient storage and dispensing
Contains 50.7 fl oz / 1.5 liters
Recommended Use and Dosage
Chillout Systems recommends using the IceBox Maintenance Formula every time the cooling system is filled. For the 17-liter Chillout IceBox, add 2 oz of Maintenance Formula per fill.
Consistent use helps prevent mineral deposits and residue from restricting fluid flow or reducing cooling-system performance. Always follow the dosing instructions provided with your specific cooling system.
Product Details
Manufacturer: Chillout Systems
Product: IceBox Maintenance Formula
Part Number: CO-IBMF
Container Size: 50.7 fl oz / 1.5 liters
17L IceBox Dosage: 2 oz per fill
Application: Personal ice-based driver cooling systems
Package: Resealable stand-up pouch with dispensing spout
Storage and Handling
Store the Maintenance Formula at room temperature and keep the pouch securely sealed when it is not in use. If the formula freezes, allow it to thaw completely to room temperature and shake the pouch before use.
Frequently Asked Questions
What does Chillout IceBox Maintenance Formula do?It helps remove residue and mineral buildup while lubricating the pump, valves, and cooling lines. It also helps inhibit corrosion inside the cooling system.
How much Maintenance Formula should I use?For the 17-liter Chillout IceBox, add 2 oz of Maintenance Formula each time the system is filled.
Should I use the formula with every fill?Yes. Chillout Systems recommends using the Maintenance Formula with every fill to help maintain cooling performance and protect internal components.
Can it be used with other driver cooling systems?The formula is designed for the Chillout IceBox and other personal ice-based cooling systems. Follow the dosing instructions for your specific cooling system.
How much formula is included?Each resealable pouch contains 50.7 fluid ounces, or 1.5 liters, of IceBox Maintenance Formula.
What should I do if the formula freezes?Allow it to thaw completely to room temperature, then shake the pouch thoroughly before use.
Shrader Performance Rear Seat Delete Gen 5 Camaro (2010-2015)
from $424.99
Shrader Performance Rear Seat Delete For Gen 5 Camaro
The Shrader Performance rear seat delete for the 5th generation Chevy Camaro includes features like a fold-down rear panel for access through the trunk. Simply pop out four plastic pins and the rear panel folds down in seconds. Shrader Performance also built the support braces under the rear seat delete's lower panels to support over 100 lbs. of cargo!
The lower panels can be lifted to provide access to a small out-of-sight storage space for things like small tools, a handbag, and anything else you don’t want visible. Or this space can be used to mount aftermarket components.
Strong, Rigid, and Beautiful
The foundation of Shrader Performance rear seat delete kits is a strong ABS plastic platform, formed for superior rigidity and strength and covered in high quality black carpet to match the factory OEM carpeting. They are the only manufacturer using this exclusive design, and all rear seat delete kits are made at their facility in North Carolina.
Shrader puts sound-insulating padding on all carpeted panels as standard equipment to help subdue exterior road noise. Still, your Camaro will instantly shed about 20 lbs.!
Installation is easy with the link to full instructions below. No removal of the interior side panels is needed. Simply remove your seats and a few components and install the new RSD panels. Completely reversible in minutes if you decide to put your seats back in.
Shrader Performance Rear Seat Delete Fits:
2010 - 2015 Chevrolet Camaro Hardtop Coupe (not convertible)
Can be easily modified to fit the CMS Performance Roll Bar for Gen 5 Camaro
Installation Notes
Tools required include basic metric sockets and a T50 Torx bit. Some cutting is involved to fit the rear seat delete around a CMS Performance Roll Bar, or you can choose to have your rear seat delete pre-cut to fit the CMS Performance Roll Bar.
Click here for basic installation instructions
Sabelt Enduro Platinum 2" FIA 8853-2016 Racing Harness
$1,679.96
$2,099.95
Sabelt Enduro Platinum Full 2" Racing Harness
The Sabelt Enduro Platinum Full 2" Racing Harness is Sabelt's flagship six-point endurance harness, engineered for professional GT, endurance, touring, and high-level track applications. Designed around rapid driver changes and compact race-car cockpits, the Enduro Platinum combines premium lightweight hardware with accessible adjustment and full 2-inch webbing.
At the center of the system is Sabelt's lightweight billet-machined camlock, designed to help guide the belt tongues into position for quick, positive engagement. Integrated pull-down lap-belt adjusters remain close to the buckle, making them easier for the driver or crew to reach in deeply bolstered racing seats and confined cockpits.
Full 2-inch shoulder belts provide an excellent interface with modern HANS and other frontal head restraint (FHR) devices, while compact hardware and high-visibility adjustment loops make the Enduro Platinum particularly well suited to multi-driver endurance racing.
Sabelt Enduro Platinum Harness Features
FIA 8853-2016 homologated six-point racing harness
Designed specifically for GT and endurance racing
Full 2-inch shoulder, lap, and anti-submarine belts
Optimized for HANS and other FHR devices
Lightweight billet-machined camlock
Camlock geometry helps guide belt tongues into position
Integrated pull-down lap-belt adjusters
Lap adjusters positioned close to the buckle for easy access
Compact center buckle and sub-belt arrangement
Lightweight shoulder-belt adjusters
High-visibility adjustment loops
Shoulder-belt grip treatment helps maintain positioning on the FHR
Shoulder-belt details help manage intercom wiring
Available in Black, Blue, and Red
Designed for Endurance Racing and Fast Driver Changes
Harness ergonomics become especially important during endurance racing. Drivers may need to enter a hot, confined cockpit while managing a helmet, FHR device, radio cables, drink tube, window net, and steering-wheel clearance—all while the crew is working to secure the restraint system quickly and correctly.
The Enduro Platinum addresses this with pull-down lap adjusters located close to the center buckle. Instead of placing the adjustment hardware farther toward the seat or chassis mounting point, the adjustment mechanism remains within easy reach of the driver or crew.
This configuration helps make driver changes faster while allowing the lap belts to be positioned and tensioned consistently across the pelvis.
Billet-Machined Endurance Camlock
One of the defining features of the Enduro Platinum is its lightweight billet-machined camlock. The belt entry points are shaped to help guide the tongues into the buckle, making engagement easier when visibility is limited or the crew is working quickly during a pit stop.
The compact buckle and integrated sub-belt arrangement also reduce unnecessary hardware around the driver's hips and lower torso—an important advantage in tightly packaged GT and endurance cockpits.
Full 2-Inch FHR-Compatible Harness
The Enduro Platinum uses full 2-inch shoulder belts designed to interface naturally with modern frontal head restraint systems. The narrower webbing sits cleanly on the belt-bearing surface of a HANS or comparable FHR device, while grip treatment in the shoulder area helps keep the belts properly positioned.
The result is a compact, modern restraint configuration designed around the driver, racing seat, and FHR as a complete safety system.
Sabelt Enduro Platinum Technical Specifications
Specification
Details
Brand
Sabelt
Model
Enduro Platinum Full 2"
Configuration
6-Point
FIA Homologation
FIA 8853-2016
Shoulder Belt Width
2"
Lap Belt Width
2"
Sub-Belt Width
2"
Lap Adjustment
Pull-Down
Lap Adjuster Location
Integrated near the camlock / buckle tongue
Camlock
Lightweight Billet-Machined Camlock
FHR / HANS Compatible
Yes
Primary Application
GT, Endurance, Touring, and Professional Motorsport
Available Colors
Black, Blue, Red
Ideal Applications
GT racing
Endurance racing
Touring cars
Prototype racing
Professional and club road racing
Multi-driver race cars
Premium HPDE and track cars
Porsche, BMW, Corvette, Ferrari, Radical, and similar track builds
Harness Installation and Fitment
The Sabelt Enduro Platinum is a motorsport restraint system rather than a vehicle-specific seat belt. Proper fitment depends on the racing seat, driver position, harness mounting points, cage or harness bar, and applicable competition regulations.
Before installation, verify that the racing seat has appropriate shoulder, lap, and anti-submarine belt openings and that the vehicle provides suitable structural mounting locations. Shoulder, lap, and sub-belt routing and mounting angles must follow current Sabelt instructions and the requirements of your sanctioning organization.
Attachment of the shoulder belts requires an appropriate roll bar or harness bar, with the anti-submarine straps mounted to suitable structural mounting points beneath the seat.
Frequently Asked Questions
Is the Sabelt Enduro Platinum FIA approved?
Yes. The Sabelt Enduro Platinum Full 2" is homologated to FIA 8853-2016. Always verify that the homologation is accepted by your specific series, class, and sanctioning organization.
Can I use the Enduro Platinum with a HANS device?
Yes. Its full 2-inch shoulder belts are designed to work with modern HANS and other frontal head restraint systems.
Why does the Enduro Platinum use 2-inch shoulder belts?
Modern FHR devices provide a relatively narrow belt-bearing surface. Two-inch shoulder webbing interfaces naturally with this surface and is commonly used in modern professional motorsport restraint systems.
What are pull-down lap adjusters?
Pull-down refers to the direction the free end of the lap belt is pulled to tighten it. The Enduro Platinum positions these adjusters close to the center buckle, keeping them accessible to the driver or crew even in deeply bolstered racing seats.
Why is the Enduro Platinum well suited to endurance racing?
Its accessible pull-down adjusters, compact center buckle, guided belt engagement, lightweight hardware, and highly visible adjustment loops are designed to make securing different drivers faster and more repeatable during driver changes.
What makes the Platinum camlock different?
Sabelt uses a lightweight billet-machined camlock with belt-entry geometry designed to help guide the belt tongues into position. It is one of the primary hardware features distinguishing the Platinum from Sabelt's lower-priced endurance harnesses.
Can multiple drivers use the same harness?
Yes. Multi-driver applications are one of the Enduro Platinum's strengths. Its accessible adjustment system makes it easier to accommodate drivers of different sizes during endurance racing and shared-car track use.
Can I install this harness with a factory seat?
The Enduro Platinum is intended to be part of a properly engineered motorsport restraint system using a compatible racing seat and appropriate structural harness mounting points. It should not be treated as a direct replacement for a factory three-point seat belt.
Why Buy Sabelt from Competition Motorsport?
Competition Motorsport specializes in professional racing safety equipment. Our team can help you evaluate the complete restraint system—including the harness, racing seat, HANS or FHR device, mounting arrangement, and intended type of competition—to make sure the components work together correctly.
If you're comparing the Sabelt Enduro Platinum with another racing harness, contact Competition Motorsport and we'll help you select the right configuration for your car and racing program.
Bell 1:2 Scale F1 Mini Helmet Oliver Bearman / Haas - 2026 F1 Season
$169.95
Bell 1:2 Scale Oliver Bearman Haas 2026 F1 Mini Helmet
Celebrate Oliver Bearman's 2026 Formula 1 season with the Bell 1:2 Scale F1 Mini Helmet Oliver Bearman / Haas. This premium collectible recreates the helmet design worn by Bearman with Haas F1 Team in the 2026 Formula 1 World Championship, capturing the bold colors, graphics, and details of his full-size Bell HP77 race helmet.
Featuring a brighter blue, yellow, and white color palette along with Bearman's distinctive bear graphic, this half-scale replica is designed for Formula 1 fans, Haas supporters, and serious motorsport collectors who want an authentic display piece tied directly to one of the sport's rising young drivers.
Manufactured by Bell Racing Helmets using processes and materials inspired by its full-size racing helmets, the Oliver Bearman 2026 Mini Helmet delivers exceptional detail, premium construction, and a highly authentic appearance.
Official Oliver Bearman 2026 Helmet Design
This 1:2 scale collectible replicates the helmet design used by Oliver Bearman during the 2026 Formula 1 season with Haas F1 Team.
The design features a vibrant combination of blue, yellow, and white along with Bearman's recognizable bear motif, creating a distinctive helmet that reflects both his identity and British racing heritage.
From the shell graphics to the visor and interior detailing, Bell has recreated the look of Bearman's full-size HP77 helmet in a compact display format.
Authentic Bell HP77 Half-Scale Replica
The Oliver Bearman 2026 Mini Helmet is modeled after Bell's HP77 Formula 1 racing helmet and manufactured at approximately half the size of the full racing helmet.
Bell produces its F1 mini helmets using manufacturing methods derived from its full-size competition helmets, giving the replica a level of construction and detail that sets it apart from standard decorative models.
The result is a premium collectible that closely captures the proportions, appearance, graphics, and overall character of the helmet Bearman wears on track.
Premium Collectible Construction
Bell constructs this mini helmet using fiber-reinforced plastic, fabric, foam, and detailed hardware to create a realistic representation of the full-size racing helmet.
77% fiber-reinforced plastic
15% cotton fabric and foam
8% hardware
Detailed visor and helmet hardware
Realistic interior padding
Authentic Bell Racing helmet proportions
High-quality graphics replicating Bearman's 2026 helmet design
Perfect for Display
At half scale, the Bell Oliver Bearman Mini Helmet is large enough to showcase the helmet's intricate details while remaining compact enough for a desk, bookshelf, display cabinet, office, race room, or motorsport collection.
Its detailed construction makes it an excellent centerpiece alongside die-cast Formula 1 cars, autographed memorabilia, team apparel, race-used collectibles, and other F1 mini helmets.
Collector's Display Packaging
The helmet is supplied in presentation packaging designed to protect the collectible during storage and display.
The packaging also makes the Bell Oliver Bearman 2026 Mini Helmet an excellent gift for Formula 1 fans, Haas supporters, Bell helmet collectors, and Oliver Bearman fans.
Bell Oliver Bearman 2026 Mini Helmet Features
Official-style Oliver Bearman 2026 Formula 1 helmet design
Haas F1 Team 2026 season collectible
1:2 scale Bell HP77 helmet replica
Signature Oliver Bearman bear graphic
Vibrant blue, yellow, and white design
Detailed visor and helmet hardware
Realistic interior construction
Premium Bell Racing craftsmanship
Compact size ideal for home or office display
Collector's presentation packaging
Excellent gift for Formula 1 and Haas fans
Designed exclusively as a collectible display piece
Bell Oliver Bearman Mini Helmet Dimensions
Length: 6.49 in / 16.5 cm
Width: 5.07 in / 12.9 cm
Height: 5.19 in / 13.2 cm
Packaging Specifications
Box Length: 180 mm
Box Width: 135 mm
Box Height: 140 mm
Gross Weight: 13 oz / 355 g including packaging
Manufacturer Information
Manufacturer: Bell Racing Helmets
Model: Oliver Bearman Haas 2026 F1 Mini Helmet
Scale: 1:2
Full-Size Helmet Inspiration: Bell HP77
Manufacturer Part Number: 4100564
For Display and Collecting Only
This Bell 1:2 Scale F1 Mini Helmet is a collectible display item only. It is not a protective helmet and must not be worn or used for motorsport, karting, cycling, or any other activity requiring head protection.
Bell Oliver Bearman 2026 F1 Mini Helmet FAQs
Q: Is this Oliver Bearman's 2026 Formula 1 helmet?A: This is a 1:2 scale collectible replica based on Oliver Bearman's 2026 helmet design with Haas F1 Team.
Q: What full-size helmet is the mini helmet based on?A: The collectible is modeled after the Bell HP77 helmet used by Oliver Bearman in Formula 1 competition.
Q: What scale is this mini helmet?A: It is a 1:2 scale replica, approximately half the size of the full racing helmet.
Q: Is this an actual wearable racing helmet?A: No. This mini helmet is designed strictly for display and collecting and does not provide protective functionality.
Q: What makes the 2026 Oliver Bearman design distinctive?A: The 2026 design features a vibrant blue, yellow, and white color scheme along with Bearman's signature bear graphic.
Q: Is the interior detailed?A: Yes. Bell mini helmets incorporate realistic interior padding, visor hardware, and construction details to closely resemble the full-size helmet.
Q: What are the dimensions?A: The helmet measures approximately 6.49 inches long, 5.07 inches wide, and 5.19 inches high.
Q: Does it come with collector's packaging?A: Yes. The helmet is supplied in presentation packaging suitable for storage, display, or gifting.
Q: What is the Bell part number?A: The manufacturer part number is 4100564.
A Must-Have Oliver Bearman and Haas F1 Collectible
The Bell 1:2 Scale Oliver Bearman Haas 2026 F1 Mini Helmet brings one of the most recognizable pieces of a Formula 1 driver's equipment into a premium collectible format.
With authentic Bell styling, detailed HP77-inspired construction, Bearman's distinctive 2026 graphics, and a display-friendly half-scale size, it is an outstanding addition to any Formula 1, Haas, Bell Racing, or Oliver Bearman collection.
CMS Performance Harness Lap Belt Mounts for Subaru WRX
from $125.00
CMS Performance Lap Belt Mounts for Subaru WRX
Secure Racing Harness Lap Belt Mounting for Your Subaru WRX
The CMS Performance Lap Belt Mounts for Subaru WRX provide strong, dedicated mounting points for the lap belts of your racing harness while retaining the factory seats and normal seat operation.
Designed specifically around the Subaru WRX seat mounting system, the CMS Performance Lap Belt Mounts install beneath the factory seat slider tracks using the vehicle's existing seat mounting locations. No drilling, cutting, welding, or permanent modification to your WRX is required.
The Right Way to Mount Harness Lap Belts in Your Subaru WRX
A properly installed racing harness requires strong and correctly positioned mounting points. The CMS Performance Subaru WRX Lap Belt Mounts eliminate the need for improvised mounting solutions by providing dedicated attachment points specifically for your harness lap belts.
The mounts utilize the factory seat mounting locations beneath the seat slider assembly, creating a clean and secure installation while keeping the hardware tucked discreetly beneath the seat.
1/4-Inch Solid Carbon Steel Construction
CMS Performance Lap Belt Mounts are manufactured from 1/4-inch solid carbon steel and feature fully TIG-welded harness mounting tabs for exceptional strength and rigidity.
Each mount is finished in a durable satin black powder coat that protects the steel and allows the hardware to blend cleanly into the Subaru WRX interior.
1/4-inch solid carbon steel construction
Fully TIG-welded harness mounting tabs
Dedicated racing harness lap belt mounting points
Durable satin black powder-coated finish
Low-profile vehicle-specific design
True Bolt-In Installation With No Drilling
The CMS Performance Subaru WRX Lap Belt Mounts install using existing factory seat mounting locations and hardware.
There is no need to drill holes through the chassis, cut the interior, or weld mounting plates into the vehicle. The mounts can also be removed without leaving permanent modifications behind, making them an excellent option for street-driven WRXs that also see track use.
Retains Factory Seat Adjustment
The CMS Performance Lap Belt Mounts are engineered to integrate with the factory Subaru WRX seating system without sacrificing normal seat operation.
Fits driver or passenger seat applications
Maintains full fore/aft seat adjustment
Maintains factory up/down seat adjustment
Does not interfere with the OEM three-point seat belt
Does not interfere with factory airbag hardware
Installs beneath the factory seat slider tracks
No drilling or cutting required
Built for Street and Track Subaru WRXs
For Subaru WRX owners participating in track days, HPDE events, time trials, autocross, or other motorsport activities, the CMS Performance Lap Belt Mounts provide a clean solution for adding dedicated racing harness mounting points while retaining the factory interior.
The low-profile design keeps the mounts nearly invisible once installed while providing convenient attachment points when your racing harness is in use.
Designed and Manufactured in the USA
The CMS Performance Subaru WRX Lap Belt Mounts are designed, manufactured, TIG welded, and powder coated in-house in the USA.
CMS Performance components are engineered specifically for motorsport applications with an emphasis on strength, vehicle-specific fitment, straightforward installation, and clean integration with the factory vehicle.
CMS Performance Subaru WRX Lap Belt Mount Details
Manufacturer: CMS Performance
Product: Racing Harness Lap Belt Mounts
Vehicle: Subaru WRX
Construction: 1/4-inch solid carbon steel
Welding: TIG-welded construction
Finish: Satin black powder coat
Installation: Bolt-in using factory seat mounting locations
Seat Position: Driver or passenger
Vehicle Modification: No drilling or cutting required
Seat Adjustment: Retains full fore/aft and up/down adjustment
OEM Compatibility: Does not interfere with factory seat belts or airbag hardware
Manufacturing: Designed and manufactured in the USA
Frequently Asked Questions
What do the CMS Performance Subaru WRX Lap Belt Mounts do?They provide dedicated attachment points for the lap belt portion of a racing harness without requiring permanent modifications to the vehicle.
Do the Subaru WRX Lap Belt Mounts require drilling?No. They install using the factory seat mounting locations and require no drilling, cutting, or welding to the vehicle.
Can the mounts be installed on the driver and passenger sides?Yes. The mounts are designed for use with either the driver or passenger seat.
Will I still be able to adjust my factory seat?Yes. The mounts are designed to retain normal fore/aft and up/down factory seat adjustment.
Can I continue using my factory seat belt?Yes. The mounts are designed so they do not interfere with the OEM three-point seat belt or factory airbag hardware.
Are these mounts for the lap belts or sub straps?These mounts are specifically designed to provide mounting points for the lap belt portion of a racing harness. A sub strap mounting solution is required separately when installing a harness with anti-submarine straps.
Can the mounts be removed later?Yes. Because they utilize the factory seat mounting locations, the mounts can be removed without leaving drilled holes or other permanent modifications behind.
Where are the CMS Performance Subaru WRX Lap Belt Mounts made?They are designed, manufactured, TIG welded, and powder coated in-house in the USA.
CMS Performance Lap Belt Mount for Mustang GT350/GT350R/S550
from $125.00
CMS Performance Lap Belt Mount for Mustang GT350/GT350R/S550
Secure Harness Lap Belt Mounting for Your Ford Mustang
The CMS Performance Lap Belt Mount provides strong, properly positioned mounting points for racing harness lap belts in Ford Mustang GT350, GT350R, GT500, and S550 applications.
Designed for use with the factory Ford Performance seating system, this bolt-in mount installs beneath the factory seat slider tracks using the vehicle's original seat mounting locations. No drilling, cutting, or permanent modification to the vehicle is required.
Vehicle Fitment
The CMS Performance Lap Belt Mount fits all variants of the following vehicles:
Ford Performance Shelby GT350 (2015-2020)
Ford Performance Shelby GT350R (2016-2020)
Ford Performance Shelby GT500 (2021+)
Ford S550 Mustang GT (2015-2023)
Heavy-Duty TIG-Welded Steel Construction
Built for serious track and motorsport use, the CMS Performance Lap Belt Mount is manufactured from heavy-duty solid carbon steel and fully TIG welded to create a rigid, secure structure for mounting your racing harness lap belts.
The mount is finished in a durable satin black powder coat that blends cleanly into the interior and is nearly invisible once the seat is installed.
True Bolt-In Installation
The CMS Performance Lap Belt Mount attaches to the factory seat mounting points beneath the seat slider tracks and utilizes the original Ford seat mounting hardware.
Installation requires no drilling, welding, or cutting and can be reversed without leaving permanent modifications behind.
Maintains Factory Seat Function
Unlike improvised harness mounting solutions, the CMS Performance Lap Belt Mount is engineered specifically around the factory Mustang seat system.
Fits the driver or passenger seat
Maintains full fore/aft seat adjustment
Maintains factory seat height adjustment
Does not interfere with the OEM three-point seat belt
Does not interfere with factory airbag hardware
Provides dedicated mounting points for racing harness lap belts
Designed and Manufactured in the USA
The CMS Performance Lap Belt Mount is designed, manufactured, TIG welded, and powder coated entirely in-house in the USA.
Every mount is built specifically for motorsport applications where strength, proper harness positioning, vehicle compatibility, and clean installation are critical.
CMS Performance Lap Belt Mount Details
Manufacturer: CMS Performance
Product: Racing Harness Lap Belt Mount
Construction: TIG-welded solid carbon steel
Finish: Satin black powder coat
Installation: Bolt-in using factory seat mounting locations
Seat Position: Driver or passenger side
Vehicle Modification: No drilling or cutting required
Seat Adjustment: Retains full fore/aft and up/down adjustment
OEM Compatibility: Does not interfere with factory seat belts or airbag hardware
Manufacturing: Designed and manufactured in the USA
Frequently Asked Questions
Does installation require drilling or cutting?No. The CMS Performance Lap Belt Mount installs using the factory seat mounting locations and original mounting hardware.
Will the mount interfere with seat adjustment?No. The mount is designed to retain normal fore/aft and up/down seat adjustment.
Can it be installed on the driver and passenger seats?Yes. The mount can be used on either the driver or passenger side.
Can I continue using the factory seat belt?Yes. The mount is designed so it does not interfere with the factory three-point seat belt or associated airbag hardware.
Is this the Sub Strap + Lap Belt Mount?No. This listing is specifically for the CMS Performance Lap Belt Mount. A combination Sub Strap + Lap Belt mounting solution is available separately for applications requiring both lap belt and anti-submarine belt mounting points.
Where is the CMS Performance Lap Belt Mount made?It is designed, manufactured, TIG welded, and powder coated in the USA.
```
Pagid 1283 Racing Brake Pads
from $301.31
Pagid Racing Brake Pads Shape 1283
Pagid 1283 Brake Pad Fitment Guide
Make
Model
Year
Front
Rear
Maserati
Trofeo GT4
2016-
X
Maserati
Trofeo MC
2013-
X
Mitsubishi
Lancer Evo IX Gravel Rally
2005-2007
X
Mitsubishi
Lancer Evo X Gravel Rally / FIA Gr. N
2007-2016
X
Mitsubishi
Lancer Evo X Tarmac Rally [Brembo Caliper]
2007-2016
X
Tatuus
F3 [Brembo Caliper]
2018-
X
X
Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits.
Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.
RSL 29 Compound
The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
Pagid RS 42 Compound
Pagid RS 42 is a medium-friction compound with medium initial bite and good cold friction. It is a classic rally pad that is also very popular in small formula and touring cars. RS 42 is a low-metallic resin bonded material containing steel and aramid fibers.
Pagid RST 1 Compound
Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications.
Pagid RST 3 Compound
RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to its combination of bite, friction and controllability.
Pagid RST 4 Compound
RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typical use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing on tarmac and gravel and for front-engine cars. RST 4 is also used in NASCAR on long ovals.
Pagid RST 5 Compound
RST 5 was developed for high-friction sprint and rally applications where extreme thermal stability is critical. It delivers very high initial bite, strong fade resistance and excellent recovery while keeping generated heat in the brake pad rather than transferring it into the brake fluid. RST 5 is designed for demanding rally, rallycross and other high-thermal-load competition applications.
Pagid Racing Brake Pads 2560
$1.00
Pagid 2560 Racing Brake Pads
Pagid 2560 Racing Brake Pad Fitment Guide
Make
Model
Engine / Variant
Years
Front Pad Shape
Rear Pad Shape
BMW
M4 GT3
3.0L
2022+
FRP3155
FRP1078
BMW
M4 GT4 (G82)
3.0L
2022+
FRP3155
FRP1078
Ferrari
296 GT3
3.0L
2022+
FRP3155
FRP1078 / FRP3156
Lexus
RC F GT3
—
2017+
FRP3155
FRP3156
McLaren
650 S GT3 Race Car
—
2017–2019
FRP3155
FRP1078
McLaren
650 S GT3 Race Car
—
2020+
FRP3153
FRP1078
Mercedes
AMG GT4
4.0L
2018+
FRP3155
FRP1078
Mercedes
AMG GT3
6.2L
2019+
FRP3155
FRP3156
Nissan
GT-R Nismo GT3 Race Car
—
2015+
FRP3155
—
Porsche
911 (991.2) GT3 R
4.0L
2019+
FRP3155
FRP1078
Porsche
911 (992) GT3 R
4.0L
2022+
FRP3155
FRP1078 / FRP3156
PAGID RSL2 / RSL2E COMPOUND
RSL 2E and RSL 2 are low metallic resin bonded materials containing steel and aramid fibers with characteristics often also used in sprint races. RSL 2E is perfect as a front axle application for long endurance GT racing with high cooling efficiency. They maintain a constant friction level over a wide range of temperatures. Their reduced wear rate and disc friendliness make these materials appropriate for endurance races on applications with high cooling efficiency. RSL 2E is further improved in terms of pad life and modulation, as well as friction stability at high temperatures and pad life with optimized cooling. RSL 2E is perfect as a front axle application for long endurance GT racing with high cooling efficiency.
PAGID RST 1 COMPOUND
Pagid RST 1 is a high-friction, aggressive pad with instant pedal response, quick release, a firm pedal at all temperatures, and a progressive torque curve. Suitable for applications with high down-force and/or very high grip. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications.
Pagid 8100 Racing Brake Pads
from $657.01
Pagid Racing Brake Pad Shape 8100
Pagid 8100 Brake Pad Fitment Guide
Make
Model
Engine / Variant
Years
Front Pad Shape
Rear Pad Shape
Aston Martin
Vantage V8 GTE
4.0L
2018+
FRP3153
FRP1078
Aston Martin
Vantage AMR GT3
6.0L
2018–2023
FRP3153
FRP1078
Aston Martin
Vantage AMR GT3 EVO
6.0L
2024+
FRP3153
FRP1078
Audi
R8 LMS GT2
5.2L
2019+
FRP3153
FRP1078
Audi
R8 LMS GT3
5.2L
2015–2018
FRP3153
FRP3156 / FRP1078
Audi
R8 LMS GT3 EVO1
5.2L
2019–2021
FRP3153
FRP1078
Audi
R8 LMS GT3 EVO2
5.2L
2022+
FRP3153
FRP1078
Bentley
Continental GT3
4.0L
2018+
FRP3153
FRP1078
BMW
M8 GTE
4.0L
2018+
FRP3153
FRP3156
Chevrolet
Camaro GT4 R
6.2L
2018+
FRP3153
FRP3137
Dodge
Viper SRT GT3 R
8.0L
2013–2017
FRP3153
FRP3156
Ferrari
488 GTE
—
—
FRP3153
FRP1078
Ferrari
458 GT3 Endurance
4.5L
—
FRP3153
FRP1078
Ferrari
458 GTE
4.5L
2014–2016
FRP3153
FRP3156
Ferrari
488 GT3
4.5L
2018+
FRP3128 / FRP3153
FRP1078
Honda
NSX GT3
3.5L
2024+
FRP3153
FRP3156
Lamborghini
Huracan GT3 Evo1
5.2L
2018+
FRP3153
FRP3156
Lamborghini
Huracan GT3 Evo2
5.2L
2023+
FRP3168 / FRP3153
FRP1078 / FRP3029
McLaren
650 S GT3 Race Car
—
2020+
FRP3153
FRP1078
McLaren
720 S GT3 EVO
—
2019+
FRP3153
FRP1078
Toyota
GR Supra GT4
3.0L
2020+
FRP3153
FRP3156
Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits.
Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.
Pagid Pre-Bedding Service
Some Pagid racing brake pads are available pre-bedded and “ready to race”. Good preparation and adjustment of the car is the basic requirement for any successful race. Bedding the brake components requires good concentration, experience and a lot of training time. But time is often crucial and you need to save it for other purposes.
Incorrectly bedded brakes reduce the controllability and the lifetime of the pads and discs. The maximum braking performance can only be achieved by correctly bedded brake parts.
To save time and money, we offer pre-bedding brake pads via a computer controlled system. Using the right sensory input, we can precisely bed in your pads free from environmental influences like traffic, rain, and even driver training.
Pagid RSL 1 Compound
Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.
Pagid RST 1 Compound
Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications.
Pagid RST 3 Compound
RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.
Pagid RST 5 Compound
Developed for high friction level sprint applications where extreme thermal stability is key. Comes in a variety of different pad shapes used in GT racing front axles, touring car front axles, rally sports, especially FIA Rally 3, Rally 2, Rally 1, and RX Rallycross.
Excellent fade resistance as well as one of the highest initial bite and friction levels of the PAGID Racing compound portfolio. RST 5 is suitable for high-thermal load applications, making it a top choice for sprint racers in terms of performance. RST 5 delivers the ideal balance between maximum performance and excellent modulation.