Cobalt Racing D1853 Brake Pads
$689.00
Cobalt D1853 Racing Brake Pads
Cobalt D1853 Brake Pad Fitment Guide
Manufacturer
Model
Build (Year)
Front
Rear
Ford
Mustang Shelby GT350 [6 piston Brembo caliper / 15.5 disc]
15 -
X
Â
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION
The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE
Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE
Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Cobalt Racing GM6 Brake Pads
$329.00
Cobalt GM6 Racing Brake Pads
Cobalt GM6 Brake Pad Fitment Guide
Manufacturer
Model
Build (Year)
Front
Rear
Chevrolet
Camaro SS [Gen 6] 4 Piston Brembo caliper
16 -
X
Chevrolet
Camaro SS [Gen 6] 6 Piston Brembo caliper - upgrade kit
16 -
X
Chevrolet
Camaro SS 1LE [Gen 6] (6 piston Brembo)
16 -
X
Chevrolet
Camaro GT4 R [race car]
17 -
X
Chevrolet
Corvette C7 base
13 - 20
X
Chevrolet
Corvette C7 Z06 [iron brakes]
15 -
X
Chevrolet
Corvette C7 Z51
14 -
X
Ford
Mustang Shelby GT350 [6 piston Brembo caliper / 15.5 disc]
15 -
X
Â
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION
The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE
Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE
Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Cobalt Racing D2450 Brake Pads
$385.00
Cobalt D2450 Racing Brake Pads
Cobalt D2450 Brake Pad Fitment Guide
Manufacturer
Model
Build (Year)
Front
Rear
Toyota
Yaris GR / Corolla GR
2020+
X
Â
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION
The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE
Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE
Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Cobalt Racing D2451 Brake Pads
$299.00
Cobalt D2451 Racing Brake Pads
Cobalt D2451 Brake Pad Fitment Guide
Manufacturer
Model
Build (Year)
Front
Rear
Toyota
Yaris GR / Corolla GR
2020+
X
Â
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION
The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE
Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE
Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Cobalt Racing D1892 Brake Pads
$365.00
Cobalt D1892 Racing Brake Pads
Cobalt D1892 Brake Pad Fitment Guide
Manufacturer
Model
Build (Year)
Front
Rear
BMW
3 Series [G20. G21]: M340i, M340d, 320i - 330i M-Technik, 330e M-Technik, 316d - 330d M-Technik
19 -
X
BMW
Z4 Roadster [G29]: M40i. sDrive 20i-30i M-Technik
19 -
X
Toyota
Supra A90
2019
X
Toyota
GR Supra
19 -
X
BMW
4 Series Coupe [G22. G23, G82]: M440i, M440d, 420i - 430i M-Technik, 420d - 430d M-Technik
20 -
X
Â
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION
The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE
Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE
Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Cobalt Racing D1867 Brake Pads
$499.00
Cobalt D1867 Racing Brake Pads
Cobalt D1867 Brake Pad Fitment Guide
Manufacturer
Model
Build (Year)
Front
Rear
BMW
3 Series [G20. G21]: M340i, M340d, 320i - 330i M-Technik, 330e M-Technik, 316d - 330d M-Technik
19 -
X
BMW
Z4 Roadster [G29]: M40i. sDrive 20i-30i M-Technik
19 -
X
Toyota
Supra A90
2019
X
Toyota
GR Supra
19 -
X
BMW
4 Series Coupe [G22. G23, G82]: M440i, M440d, 420i - 430i M-Technik, 420d - 430d M-Technik
20 -
X
Â
Cobalt Friction Technologies, Inc. is a leading developer & manufacturer of friction compounds for high-performance and professional motorsport disc brake applications. With our industry-leading range of race-proven XR-Series Carbon-Ceramic materials, Cobalt has a solution to meet your most demanding performance requirements, while always exceeding your expectations with superior technical and race engineering support.
PASSION
The heart and soul of Cobalt Friction Technologies is fueled by our never-ending passion for motorsports. Our teams and drivers continually place greater demands on their equipment, and Cobalt Friction is there to satisfy these demands every step along the way.
PERFORMANCE
Cobalt Friction's customer-driven research & development is what sets us apart from the competition. Our engineers do not design compounds based on lab results alone or to solely meet overly simplified, uni-dimensional "performance criteria". Rather, we continually "step outside the box" by working with and collecting feedback from our drivers and teams at all levels of professional and amateur motorsports, right there at the race track...week in and week out. When being the best and finishing first is the only option, Cobalt Friction accepts zero compromises, and so do our customers and teams.
TECHNICAL EXCELLENCE
Cobalt-equipped drivers and teams are backed by race engineering support that is second to none. From the garages at the Rolex 24 at Daytona to the paddock at the SCCA Nationals, Cobalt Friction Technologies delivers the products, knowledge and power to win.
Carbotech CT592A Brake Pads (Rear)
from $252.00
Carbotech CT592A Brake Pads
Carbotech CT592A Brake Pad Fitment Guide
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vanquish
03 - 08
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Cadillac
CTS-V (6 piston front caliper)
10 - 14
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro ZL1 [Gen 5]
12 - 15
X
Chevrolet
Camaro ZL1 and ZL1 1LE [Gen 6]
16 -
X
Dodge
Challenger HellCat & 392
15 -
X
Dodge
Viper
01 - 02
X
Ferrari
360 all models
99 - 05
X
X
Ferrari
F430 [cast iron brakes]
05 - 10
X
X
KTM
X-Bow
08 -
X
Lancia
Delta 2.0 HF Int.16V Evo
91 - 94
X
Lotus
Esprit Turbo
94 - 96
X
X
Maserati
Ghibli (M157) [6 piston Brembo caliper / disc ø 360mm]
13 -
X
Maserati
Grand Turismo
07 -
X
Peugeot
406 Coupe Brembo brake
97 - 04
X
Renault
Clio II 3.0 V6 mid engine
00 - 05
X
X
Seat
Leon 1.8T Cupra R (Brembo)
03 - 06
X
Seat
Leon 2.8 Cupra 4 (Brembo)
01 - 06
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Available Carbotech Compounds
1521 — High-performance street compound with low dust, low noise, and excellent release and modulation.
AX6 — Autocross-focused compound with strong low-temperature bite and progressive control.
XP8 — Entry racing and track-day compound with strong fade resistance and rotor-friendly behavior.
XP10 — Higher-torque race compound with strong initial bite and excellent fade resistance.
XP12 — More aggressive race compound with added bite and high-temperature capability.
RP2 — Endurance racing compound designed for sustained performance and strong fade resistance.
XP20 — Very aggressive racing compound with high torque and extreme heat capability.
XP24 — Top-tier Carbotech race compound engineered for maximum torque and endurance-level demands.
How to Choose the Right Compound
1521 is the street-focused option. AX6 is intended for autocross. XP8, XP10, XP12, XP20, and XP24 are race-oriented compounds with increasing heat and torque capability. RP2 is designed for endurance racing. Track and racing compounds are not intended for normal street use.
Carbotech CT592A Brake Pads FAQs
How do I know if CT592A fits my vehicle?Review the Vehicle Fitment section above and compare the make, model, year range, and notes such as caliper, rotor, or trim details to your vehicle.
Which Carbotech compound is best for street driving?The 1521 compound is Carbotech's street-focused option. The other compounds in this listing are intended for autocross, track, or race applications.
Do I need to bed in Carbotech brake pads?Yes. Proper bedding is important for pad transfer, performance, and wear. Follow Carbotech's recommended bedding procedure for the chosen compound.
Choose the Carbotech CT592A compound that matches your vehicle and driving demands, then confirm fitment carefully before checkout.
A1-423 Girodisc Ferrari 296 Challenge Front Iron Rotor Conversion
$2,150.00
Girodisc Ferrari 296 Challenge Front Iron Rotor Conversion
Replace the factory race car’s front carbon-ceramic rotors with rebuildable, two-piece iron assemblies.
Required pads: D1405 shape in an iron-compatible compound.
Features
High-carbon iron rings
72 curved cooling vanes
Reusable black-anodized 6061-T6 aluminum hats
Cadmium-plated steel drive pins
Spring clips and washers control hardware noise
Major components manufactured in Bellingham, Washington
Vehicle Fitment
Ferrari 296 Challenge factory race car.
Technical Specifications
Part number: A1-423
Position: Front
Diameter: 408mm
Thickness: 36mm
Minimum thickness: 34mm
Weight: Approximately 30 lbs per assembly
Replacement rings: D1-423
FAQs
Are modifications required? Only the conversion rotors and correct D1405 pads are required.
Can the hats be reused? Yes, with D1-423 replacement rings.
When should rings be replaced? At minimum thickness or when a crack reaches the edge.
Manufacturer stock photography may differ from the actual product.
D1-423 Girodisc Ferrari 296 Challenge Front Replacement Rings
$1,290.00
GiroDisc Ferrari 296 Challenge Front Replacement Rings
Service your existing Girodisc A1-423 front iron rotor conversion with D1-423 replacement rings. This set renews the wear components while retaining your Girodisc hats.
Features
Replacement rings sold as a pair
Replacement hardware included
Reuse existing Girodisc hats
For servicing an existing iron conversion
Vehicle Fitment
Ferrari 296 Challenge equipped with the Girodisc A1-423 front iron rotor conversion.
Technical Specifications
Part number: D1-423
Position: Front
Product type: Replacement rotor rings
Quantity: Pair
Hardware: Included
Aluminum hats: Reuse existing Girodisc hats
FAQs
Will these fit factory or other-brand hats? No. Girodisc specifies compatibility with its own hats.
Is this a complete conversion kit? No. Choose A1-423 for the complete rotor conversion.
Is hardware supplied? Yes. Only your existing Girodisc hats are reused.
Manufacturer stock photography may differ from the actual product.
Race Technologies P1015 Racing Brake Pads (Front)
from $349.00
Race Technologies P1015 / 2368 Racing Brake Pads
Race Technologies P1015 / 2368 Racing Brake Pads Fitment Guide
Make
Model
Build (Year)
Front
Rear
Aston Martin
DB9
04 - 16
X
Aston Martin
Vanquish
03 - 08
X
Aston Martin
Vantage V8 GT4 ProDrive [race car] stock OE caliper
12 -
X
Cadillac
CTS-V (4 piston front caliper)
03 - 09
X
Cadillac
CTS-V (6 piston front caliper)
10 - 14
X
Chevrolet
Camaro SS [Gen 5]
09 - 15
X
Chevrolet
Camaro ZL1 [Gen 5]
12 - 15
X
Chevrolet
Camaro ZL1 and ZL1 1LE [Gen 6]
16 -
X
Dodge
Challenger HellCat & 392
15 -
X
Dodge
Viper
01 - 02
X
Ferrari
360 all models
99 - 05
X
X
Ferrari
F430 [cast iron brakes]
05 - 10
X
X
KTM
X-Bow
08 -
X
Lancia
Delta 2.0 HF Int.16V Evo
91 - 94
X
Lotus
Esprit Turbo
94 - 96
X
X
Maserati
Ghibli (M157) [6 piston Brembo caliper / disc ø 360mm]
13 -
X
Maserati
Grand Turismo
07 -
X
Peugeot
406 Coupe Brembo brake
97 - 04
X
Renault
Clio II 3.0 V6 mid engine
00 - 05
X
X
Seat
Leon 1.8T Cupra R (Brembo)
03 - 06
X
Seat
Leon 2.8 Cupra 4 (Brembo)
01 - 06
X
Volvo
S60 Turbo R Brembo brakes
03 - 07
X
Volvo
V70 R 2.5T Brembo brakes
03 - 07
X
Â
The Race Technologies P1015.15 brake pad features a compact, purpose-built backing plate designed for compatible high-performance braking systems. Measuring 110 mm wide by 69 mm high with a 52 mm friction material depth, the P1015 combines a distinctive curved friction surface with a low-profile mounting design for demanding performance driving applications.
Available from Competition Motorsport in RE10 racing and TS20 street/track compounds, the Race Technologies P1015.15 allows drivers to select the friction characteristics best suited to their vehicle, brake system, tire grip, and intended use. Whether preparing for an HPDE event, track day, or competitive race weekend, proper pad shape identification and compound selection are essential for consistent braking performance.
Race Technologies P1015 / 2368 Brake Pad Specifications
Pad Shape: P1015
Part Designation: P1015.15
Overall Width: 110 mm
Overall Height: 69 mm
Friction Material Depth: 52 mm
Nominal Pad Thickness: 15 mm
Available Compounds: RE10 and TS20
Intended Use: HPDE, track days, club racing, and motorsport, depending on compound
The P1015 features two upper retaining openings, a curved upper friction edge, and a shallow concave lower profile. Its distinctive mounting geometry makes accurate shape identification essential when replacing existing brake pads or selecting friction materials for compatible brake calipers.
Always compare the P1015 technical drawing and dimensions with your existing brake pads or caliper manufacturer's specifications before ordering.
RE10 Racing Brake Compound
Race Technologies RE10 is an endurance-focused racing friction material developed for demanding track and competition environments. Designed to deliver consistent braking characteristics under sustained high temperatures, RE10 emphasizes predictable modulation, thermal stability, and low pad and rotor wear.
RE10 is well suited to advanced HPDE, sprint racing, club racing, and endurance competition where repeatable braking performance and durability are priorities. Its controlled friction response helps drivers maintain confidence during repeated heavy braking and extended track sessions.
As a competition-focused compound, RE10 is intended primarily for track and racing applications. Increased brake noise and dust may occur during lower-temperature street operation.
TS20 Street and Track Brake Compound
Race Technologies TS20 offers a versatile friction option for performance vehicles used in both street and track environments. Designed for responsive initial braking, predictable modulation, and more street-friendly noise and dust characteristics than a dedicated racing compound, TS20 is an attractive choice for drivers seeking dependable braking across a broad range of operating conditions.
TS20 is particularly well suited to spirited street driving, HPDE events, and track days where braking performance and everyday drivability are both important.
RE10 vs. TS20: Which Compound Should You Choose?
Choosing the correct Race Technologies P1015 brake compound depends on how the vehicle is used and the demands placed on its braking system.
RE10: Recommended for dedicated track cars, sprint racing, club racing, and endurance applications requiring sustained high-temperature capability, consistent friction, and competition-oriented durability.
TS20: Recommended for performance street cars, HPDE, and dual-purpose street/track vehicles where responsive braking and more street-friendly characteristics are important.
Vehicle weight, tire grip, rotor configuration, brake cooling, operating temperatures, and driving style all influence compound selection. Contact Competition Motorsport for assistance choosing the appropriate friction material for your application.
Why Choose Race Technologies P1015 Brake Pads?
The Race Technologies P1015 combines a compact 110 mm overall width with a 69 mm height and 52 mm friction material depth. Its distinctive backing plate geometry and performance-oriented compound options make it a specialized replacement choice for compatible braking systems.
Distinctive Race Technologies P1015 backing plate geometry
110 mm overall width and 69 mm overall height
52 mm friction material depth
15 mm nominal pad thickness
Choice of RE10 racing or TS20 street/track compounds
Race Technologies P1015 Brake Pad Fitment
The Race Technologies P1015 pad shape is intended for brake calipers requiring its specific backing plate dimensions, retaining features, and friction material geometry. Proper fitment depends on caliper design, vehicle brake configuration, and required pad thickness.
Before ordering, verify the 110 mm overall width, 69 mm overall height, 52 mm friction material depth, 15 mm thickness, and mounting-hole locations against your existing brake pads or caliper manufacturer's specifications.
Vehicle make and model alone may not establish compatibility, particularly when optional brake packages or aftermarket performance calipers are installed.
Buy Race Technologies P1015 Brake Pads at Competition Motorsport
Competition Motorsport specializes in premium racing brake pads, performance brake components, and motorsport equipment for track-day enthusiasts, club racers, professional race teams, and performance shops.
Select your preferred Race Technologies P1015.15 RE10 or TS20 compound above, or contact our motorsports specialists for assistance confirming pad fitment and selecting the appropriate friction material for your vehicle.
GiroDisc Porsche Caliper Stud Kit 13 BCS-13
$180.00
GiroDisc Porsche Caliper Stud Kit 13 – BCS-13
The GiroDisc Porsche Caliper Stud Kit 13 (BCS-13) converts compatible Porsche brake caliper mounting points from conventional bolts to stainless steel studs and removable nuts. It is designed for owners who service their brakes regularly, including track-day drivers and club racers.
This kit is selected by the vehicle's brake equipment, axle and caliper mounting arrangement. Other applications require separate confirmation. Do not assume BCS-13 is interchangeable with a different numbered stud kit.
Protect Your Porsche Caliper Mounting Threads
Repeated caliper removal means repeatedly threading a mounting bolt into the suspension upright. A stud conversion allows the stud to remain in place while the caliper is removed using the mounting nuts. This helps reduce repeated wear at the upright threads and makes it easier to guide the caliper back into position.
The BCS-13 is useful during rotor replacement, brake inspections and other service requiring caliper removal. Its benefits are especially practical for Porsche owners who perform frequent brake maintenance throughout a track season.
GiroDisc BCS-13 Features
17-4 PH stainless steel caliper mounting studs
ARP stainless steel 12-point nuts
Corrosion-resistant mounting hardware
Studs remain installed during routine caliper removal
Helps guide the caliper into position during installation
Reduces repeated threading into the suspension upright
Mounting hardware for two calipers on one axle
Application: Specified rear caliper mounting configurations
GiroDisc Porsche Caliper Stud Kit 13 Specifications
Manufacturer: GiroDisc
Manufacturer Part Number: BCS-13
Product Type: Brake Caliper Mounting Stud Conversion Kit
Stud Material: 17-4 PH Stainless Steel
Nut Type: ARP Stainless Steel 12-Point
Installation Location: Rear in the applications listed below
Mounting Configuration: Specified rear caliper mounting configurations
Coverage: One Axle Per Kit
What's Included With GiroDisc BCS-13
Four brake caliper mounting studs
Four ARP 12-point nuts
Four washers
Medium-strength thread-locking compound
One kit provides hardware for two calipers. Converting both axles requires two kits, and the front and rear may require different part numbers.
GiroDisc BCS-13 Porsche Vehicle Fitment (Rear)
997 Turbo, including PCCB
997.1 GT3/RS with steel or PCCB
997.2 GT3/RS with iron or PCCB
991.1 Carrera S/4S/GTS with PCCB
Fitment depends on the exact brake configuration, axle and spacer arrangement. The applications above are a selection guide. Confirm the part number against the current GiroDisc application information for the vehicle and rotor setup before purchase.
Factory Mounting Positions and GiroDisc Spacer Upgrades
Some Porsche GiroDisc rotor upgrades use caliper spacers to accommodate a larger rotor. A change in caliper position can change the required mounting hardware. A stud kit listed for a factory mounting position should not automatically be carried over to a spacer conversion.
The BCS-13 is intended for specified rear caliper mounting configurations. Check the front and rear requirements individually, including whether the car has factory iron brakes or Porsche Ceramic Composite Brakes (PCCB).
Installation Information
Follow GiroDisc's instructions for thread preparation, thread-locking compound, stud engagement and nut torque. Confirm the required caliper spacing and hardware before installation. A technician familiar with the vehicle's braking system should perform the work.
GiroDisc Porsche Caliper Stud Kit 13 FAQs
What does the GiroDisc BCS-13 caliper stud kit do?
It replaces the conventional caliper mounting bolts in compatible applications with studs and removable nuts, helping protect the upright threads during repeated brake service.
How many calipers does one BCS-13 kit cover?
One kit contains mounting hardware for two calipers on one axle. Check which kit is specified for each axle before ordering a complete front and rear conversion.
Where is BCS-13 installed?
Its installation location is rear in the applications listed below. Use the vehicle fitment section above to identify the relevant brake configuration.
Are the BCS-13 studs stainless steel?
Yes. The studs use 17-4 PH stainless steel, and the kit includes ARP stainless steel 12-point nuts.
Can I choose BCS-13 using only my Porsche model name?
No. Vehicle generation, brake equipment, axle and any caliper spacers must also match. Kits with different numbers should not be treated as interchangeable.
Will BCS-13 work with a GiroDisc rotor upgrade?
Only when this part number is specified for that rotor and caliper arrangement. Check whether the upgrade retains the factory mounting position or requires spacers.
Can the same stud kit be used on the front and rear?
Some applications specify the same kit on both axles, while others require different kits. Confirm the front and rear part numbers separately.
Does the kit replace the brake rotors or calipers?
No. This is a caliper mounting hardware conversion. Rotors, calipers and any required relocation spacers are separate components.
GiroDisc Porsche Caliper Stud Kit 11 BCS-11
$180.00
GiroDisc Porsche Caliper Stud Kit 11 – BCS-11
The GiroDisc Porsche Caliper Stud Kit 11 (BCS-11) converts compatible Porsche brake caliper mounting points from conventional bolts to stainless steel studs and removable nuts. It is designed for owners who service their brakes regularly, including track-day drivers and club racers.
This kit is selected by the vehicle's brake equipment, axle and caliper mounting arrangement. BCS-11 is the spacer-position rear option. BCS-10 is listed for the factory rear mounting position on these applications.
Protect Your Porsche Caliper Mounting Threads
Repeated caliper removal means repeatedly threading a mounting bolt into the suspension upright. A stud conversion allows the stud to remain in place while the caliper is removed using the mounting nuts. This helps reduce repeated wear at the upright threads and makes it easier to guide the caliper back into position.
The BCS-11 is useful during rotor replacement, brake inspections and other service requiring caliper removal. Its benefits are especially practical for Porsche owners who perform frequent brake maintenance throughout a track season.
GiroDisc BCS-11 Features
17-4 PH stainless steel caliper mounting studs
ARP stainless steel 12-point nuts
Corrosion-resistant mounting hardware
Studs remain installed during routine caliper removal
Helps guide the caliper into position during installation
Reduces repeated threading into the suspension upright
Mounting hardware for two calipers on one axle
Application: Specified GiroDisc rear caliper spacer configurations
GiroDisc Porsche Caliper Stud Kit 11 Specifications
Manufacturer: GiroDisc
Manufacturer Part Number: BCS-11
Product Type: Brake Caliper Mounting Stud Conversion Kit
Stud Material: 17-4 PH Stainless Steel
Nut Type: ARP Stainless Steel 12-Point
Installation Location: Rear
Mounting Configuration: Specified GiroDisc rear caliper spacer configurations
Coverage: One Axle Per Kit
What's Included With GiroDisc BCS-11
Four brake caliper mounting studs
Four ARP 12-point nuts
Four washers
Medium-strength thread-locking compound
One kit provides hardware for two calipers. Converting both axles requires two kits, and the front and rear may require different part numbers.
GiroDisc BCS-11 Porsche Vehicle Fitment
Rear (with specified GiroDisc spacers):
996 Carrera 4S, Turbo and early European GT3
997.1& 997.2 Carrera S/4S/GTS
Fitment depends on the exact brake configuration, axle and spacer arrangement. The applications above are a selection guide. Confirm the part number against the current GiroDisc application information for the vehicle and rotor setup before purchase.
Factory Mounting Positions and GiroDisc Spacer Upgrades
Some Porsche GiroDisc rotor upgrades use caliper spacers to accommodate a larger rotor. A change in caliper position can change the required mounting hardware. A stud kit listed for a factory mounting position should not automatically be carried over to a spacer conversion.
The BCS-11 is intended for specified girodisc rear caliper spacer configurations. Check the front and rear requirements individually, including whether the car has factory iron brakes or Porsche Ceramic Composite Brakes (PCCB).
Installation Information
Follow GiroDisc's instructions for thread preparation, thread-locking compound, stud engagement and nut torque. Confirm the required caliper spacing and hardware before installation. A technician familiar with the vehicle's braking system should perform the work.
GiroDisc Porsche Caliper Stud Kit 11 FAQs
What does the GiroDisc BCS-11 caliper stud kit do?
It replaces the conventional caliper mounting bolts in compatible applications with studs and removable nuts, helping protect the upright threads during repeated brake service.
How many calipers does one BCS-11 kit cover?
One kit contains mounting hardware for two calipers on one axle. Check which kit is specified for each axle before ordering a complete front and rear conversion.
Where is BCS-11 installed?
Its installation location is rear. Use the vehicle fitment section above to identify the relevant brake configuration.
Are the BCS-11 studs stainless steel?
Yes. The studs use 17-4 PH stainless steel, and the kit includes ARP stainless steel 12-point nuts.
Can I choose BCS-11 using only my Porsche model name?
No. Vehicle generation, brake equipment, axle and any caliper spacers must also match. Kits with different numbers should not be treated as interchangeable.
Will BCS-11 work with a GiroDisc rotor upgrade?
Only when this part number is specified for that rotor and caliper arrangement. Check whether the upgrade retains the factory mounting position or requires spacers.
Can the same stud kit be used on the front and rear?
Some applications specify the same kit on both axles, while others require different kits. Confirm the front and rear part numbers separately.
Does the kit replace the brake rotors or calipers?
No. This is a caliper mounting hardware conversion. Rotors, calipers and any required relocation spacers are separate components.
GiroDisc Porsche Caliper Stud Kit 12 BCS-12
$180.00
GiroDisc Porsche Caliper Stud Kit 12 – BCS-12
The GiroDisc Porsche Caliper Stud Kit 12 (BCS-12) converts compatible Porsche brake caliper mounting points from conventional bolts to stainless steel studs and removable nuts. It is designed for owners who service their brakes regularly, including track-day drivers and club racers.
This kit is selected by the vehicle's brake equipment, axle and caliper mounting arrangement. BCS-12 is the factory-position front option. Specified GiroDisc spacer upgrades can require BCS-01.
Protect Your Porsche Caliper Mounting Threads
Repeated caliper removal means repeatedly threading a mounting bolt into the suspension upright. A stud conversion allows the stud to remain in place while the caliper is removed using the mounting nuts. This helps reduce repeated wear at the upright threads and makes it easier to guide the caliper back into position.
The BCS-12 is useful during rotor replacement, brake inspections and other service requiring caliper removal. Its benefits are especially practical for Porsche owners who perform frequent brake maintenance throughout a track season.
GiroDisc BCS-12 Features
17-4 PH stainless steel caliper mounting studs
ARP stainless steel 12-point nuts
Corrosion-resistant mounting hardware
Studs remain installed during routine caliper removal
Helps guide the caliper into position during installation
Reduces repeated threading into the suspension upright
Mounting hardware for two calipers on one axle
Application: Specified factory front caliper mounting configurations
GiroDisc Porsche Caliper Stud Kit 12 Specifications
Manufacturer: GiroDisc
Manufacturer Part Number: BCS-12
Product Type: Brake Caliper Mounting Stud Conversion Kit
Stud Material: 17-4 PH Stainless Steel
Nut Type: ARP Stainless Steel 12-Point
Installation Location: Front
Mounting Configuration: Specified factory front caliper mounting configurations
Coverage: One Axle Per Kit
What's Included With GiroDisc BCS-12
Four brake caliper mounting studs
Four ARP 12-point nuts
Four washers
Medium-strength thread-locking compound
One kit provides hardware for two calipers. Converting both axles requires two kits, and the front and rear may require different part numbers.
GiroDisc BCS-12 Porsche Vehicle Fitment
Front in specified factory configurations: 996 Carrera 4S, Turbo and early European GT3.
Front in specified factory configurations: 997.1/997.2 Carrera S/4S/GTS and 981 base Cayman/Boxster.
Fitment depends on the exact brake configuration, axle and spacer arrangement. The applications above are a selection guide. Confirm the part number against the current GiroDisc application information for the vehicle and rotor setup before purchase.
Factory Mounting Positions and GiroDisc Spacer Upgrades
Some Porsche GiroDisc rotor upgrades use caliper spacers to accommodate a larger rotor. A change in caliper position can change the required mounting hardware. A stud kit listed for a factory mounting position should not automatically be carried over to a spacer conversion.
The BCS-12 is intended for specified factory front caliper mounting configurations. Check the front and rear requirements individually, including whether the car has factory iron brakes or Porsche Ceramic Composite Brakes (PCCB).
Installation Information
Follow GiroDisc's instructions for thread preparation, thread-locking compound, stud engagement and nut torque. Confirm the required caliper spacing and hardware before installation. A technician familiar with the vehicle's braking system should perform the work.
GiroDisc Porsche Caliper Stud Kit 12 FAQs
What does the GiroDisc BCS-12 caliper stud kit do?
It replaces the conventional caliper mounting bolts in compatible applications with studs and removable nuts, helping protect the upright threads during repeated brake service.
How many calipers does one BCS-12 kit cover?
One kit contains mounting hardware for two calipers on one axle. Check which kit is specified for each axle before ordering a complete front and rear conversion.
Where is BCS-12 installed?
Its installation location is front. Use the vehicle fitment section above to identify the relevant brake configuration.
Are the BCS-12 studs stainless steel?
Yes. The studs use 17-4 PH stainless steel, and the kit includes ARP stainless steel 12-point nuts.
Can I choose BCS-12 using only my Porsche model name?
No. Vehicle generation, brake equipment, axle and any caliper spacers must also match. Kits with different numbers should not be treated as interchangeable.
Will BCS-12 work with a GiroDisc rotor upgrade?
Only when this part number is specified for that rotor and caliper arrangement. Check whether the upgrade retains the factory mounting position or requires spacers.
Can the same stud kit be used on the front and rear?
Some applications specify the same kit on both axles, while others require different kits. Confirm the front and rear part numbers separately.
Does the kit replace the brake rotors or calipers?
No. This is a caliper mounting hardware conversion. Rotors, calipers and any required relocation spacers are separate components.
GiroDisc Porsche Caliper Stud Kit 10 BCS-10
$180.00
GiroDisc Porsche Caliper Stud Kit 10 – BCS-10
The GiroDisc Porsche Caliper Stud Kit 10 (BCS-10) converts compatible Porsche brake caliper mounting points from conventional bolts to stainless steel studs and removable nuts. It is designed for owners who service their brakes regularly, including track-day drivers and club racers.
This kit is selected by the vehicle's brake equipment, axle and caliper mounting arrangement. BCS-10 is the factory-position rear option in these applications. The specified GiroDisc spacer arrangement uses BCS-11.
Protect Your Porsche Caliper Mounting Threads
Repeated caliper removal means repeatedly threading a mounting bolt into the suspension upright. A stud conversion allows the stud to remain in place while the caliper is removed using the mounting nuts. This helps reduce repeated wear at the upright threads and makes it easier to guide the caliper back into position.
The BCS-10 is useful during rotor replacement, brake inspections and other service requiring caliper removal. Its benefits are especially practical for Porsche owners who perform frequent brake maintenance throughout a track season.
GiroDisc BCS-10 Features
17-4 PH stainless steel caliper mounting studs
ARP stainless steel 12-point nuts
Corrosion-resistant mounting hardware
Studs remain installed during routine caliper removal
Helps guide the caliper into position during installation
Reduces repeated threading into the suspension upright
Mounting hardware for two calipers on one axle
Application: Specified factory rear caliper mounting configurations
GiroDisc Porsche Caliper Stud Kit 10 Specifications
Manufacturer: GiroDisc
Manufacturer Part Number: BCS-10
Product Type: Brake Caliper Mounting Stud Conversion Kit
Stud Material: 17-4 PH Stainless Steel
Nut Type: ARP Stainless Steel 12-Point
Installation Location: Rear
Mounting Configuration: Specified factory rear caliper mounting configurations
Coverage: One Axle Per Kit
What's Included With GiroDisc BCS-10
Four brake caliper mounting studs
Four ARP 12-point nuts
Four washers
Medium-strength thread-locking compound
One kit provides hardware for two calipers. Converting both axles requires two kits, and the front and rear may require different part numbers.
GiroDisc BCS-10 Porsche Vehicle Fitment
Rear in specified factory configurations: 996 Carrera 4S, Turbo and early European GT3.
Rear in specified factory configurations: 997.1/997.2 Carrera S/4S/GTS.
Fitment depends on the exact brake configuration, axle and spacer arrangement. The applications above are a selection guide. Confirm the part number against the current GiroDisc application information for the vehicle and rotor setup before purchase.
Factory Mounting Positions and GiroDisc Spacer Upgrades
Some Porsche GiroDisc rotor upgrades use caliper spacers to accommodate a larger rotor. A change in caliper position can change the required mounting hardware. A stud kit listed for a factory mounting position should not automatically be carried over to a spacer conversion.
The BCS-10 is intended for specified factory rear caliper mounting configurations. Check the front and rear requirements individually, including whether the car has factory iron brakes or Porsche Ceramic Composite Brakes (PCCB).
Installation Information
Follow GiroDisc's instructions for thread preparation, thread-locking compound, stud engagement and nut torque. Confirm the required caliper spacing and hardware before installation. A technician familiar with the vehicle's braking system should perform the work.
GiroDisc Porsche Caliper Stud Kit 10 FAQs
What does the GiroDisc BCS-10 caliper stud kit do?
It replaces the conventional caliper mounting bolts in compatible applications with studs and removable nuts, helping protect the upright threads during repeated brake service.
How many calipers does one BCS-10 kit cover?
One kit contains mounting hardware for two calipers on one axle. Check which kit is specified for each axle before ordering a complete front and rear conversion.
Where is BCS-10 installed?
Its installation location is rear. Use the vehicle fitment section above to identify the relevant brake configuration.
Are the BCS-10 studs stainless steel?
Yes. The studs use 17-4 PH stainless steel, and the kit includes ARP stainless steel 12-point nuts.
Can I choose BCS-10 using only my Porsche model name?
No. Vehicle generation, brake equipment, axle and any caliper spacers must also match. Kits with different numbers should not be treated as interchangeable.
Will BCS-10 work with a GiroDisc rotor upgrade?
Only when this part number is specified for that rotor and caliper arrangement. Check whether the upgrade retains the factory mounting position or requires spacers.
Can the same stud kit be used on the front and rear?
Some applications specify the same kit on both axles, while others require different kits. Confirm the front and rear part numbers separately.
Does the kit replace the brake rotors or calipers?
No. This is a caliper mounting hardware conversion. Rotors, calipers and any required relocation spacers are separate components.
GiroDisc Porsche Caliper Stud Kit 5 BCS-05
$180.00
GiroDisc Porsche Caliper Stud Kit 5 – BCS-05
The GiroDisc Porsche Caliper Stud Kit 5 (BCS-05) converts compatible Porsche brake caliper mounting points from conventional bolts to stainless steel studs and removable nuts. It is designed for owners who service their brakes regularly, including track-day drivers and club racers.
This kit is selected by the vehicle's brake equipment, axle and caliper mounting arrangement. The same Porsche model may require BCS-03 or another kit when a GiroDisc upgrade adds caliper spacers. Verify both axles separately.
Protect Your Porsche Caliper Mounting Threads
Repeated caliper removal means repeatedly threading a mounting bolt into the suspension upright. A stud conversion allows the stud to remain in place while the caliper is removed using the mounting nuts. This helps reduce repeated wear at the upright threads and makes it easier to guide the caliper back into position.
The BCS-05 is useful during rotor replacement, brake inspections and other service requiring caliper removal. Its benefits are especially practical for Porsche owners who perform frequent brake maintenance throughout a track season.
GiroDisc BCS-05 Features
17-4 PH stainless steel caliper mounting studs
ARP stainless steel 12-point nuts
Corrosion-resistant mounting hardware
Studs remain installed during routine caliper removal
Helps guide the caliper into position during installation
Reduces repeated threading into the suspension upright
Mounting hardware for two calipers on one axle
Application: Specified factory caliper mounting configurations
GiroDisc Porsche Caliper Stud Kit 5 Specifications
Manufacturer: GiroDisc
Manufacturer Part Number: BCS-05
Product Type: Brake Caliper Mounting Stud Conversion Kit
Stud Material: 17-4 PH Stainless Steel
Nut Type: ARP Stainless Steel 12-Point
Installation Location: Front or rear, depending on application
Mounting Configuration: Specified factory caliper mounting configurations
Coverage: One Axle Per Kit
What's Included With GiroDisc BCS-05
Four brake caliper mounting studs
Four ARP 12-point nuts
Four washers
Medium-strength thread-locking compound
One kit provides hardware for two calipers. Converting both axles requires two kits, and the front and rear may require different part numbers.
GiroDisc BCS-05 Porsche Vehicle Fitment
Front and rear (in specified factory configurations):
997.2 Carrera/Carrera 4
991.1 Carrera/Carrera 4 and Carrera S/4S/GTS,
991.2 Carrera/Carrera 4 and Carrera S/4S
Front:
997 Turbo
997.1 GT3/RS with steel brakes
981 S
718 Base/S
996 GT2/GT3 and selected PCCB-equipped 996/997/981 models
Fitment depends on the exact brake configuration, axle and spacer arrangement. The applications above are a selection guide. Confirm the part number against the current GiroDisc application information for the vehicle and rotor setup before purchase.
Factory Mounting Positions and GiroDisc Spacer Upgrades
Some Porsche GiroDisc rotor upgrades use caliper spacers to accommodate a larger rotor. A change in caliper position can change the required mounting hardware. A stud kit listed for a factory mounting position should not automatically be carried over to a spacer conversion.
The BCS-05 is intended for specified factory caliper mounting configurations. Check the front and rear requirements individually, including whether the car has factory iron brakes or Porsche Ceramic Composite Brakes (PCCB).
Installation Information
Follow GiroDisc's instructions for thread preparation, thread-locking compound, stud engagement and nut torque. Confirm the required caliper spacing and hardware before installation. A technician familiar with the vehicle's braking system should perform the work.
GiroDisc Porsche Caliper Stud Kit 5 FAQs
What does the GiroDisc BCS-05 caliper stud kit do?
It replaces the conventional caliper mounting bolts in compatible applications with studs and removable nuts, helping protect the upright threads during repeated brake service.
How many calipers does one BCS-05 kit cover?
One kit contains mounting hardware for two calipers on one axle. Check which kit is specified for each axle before ordering a complete front and rear conversion.
Where is BCS-05 installed?
Its installation location is front or rear, depending on application. Use the vehicle fitment section above to identify the relevant brake configuration.
Are the BCS-05 studs stainless steel?
Yes. The studs use 17-4 PH stainless steel, and the kit includes ARP stainless steel 12-point nuts.
Can I choose BCS-05 using only my Porsche model name?
No. Vehicle generation, brake equipment, axle and any caliper spacers must also match. Kits with different numbers should not be treated as interchangeable.
Will BCS-05 work with a GiroDisc rotor upgrade?
Only when this part number is specified for that rotor and caliper arrangement. Check whether the upgrade retains the factory mounting position or requires spacers.
Can the same stud kit be used on the front and rear?
Some applications specify the same kit on both axles, while others require different kits. Confirm the front and rear part numbers separately.
Does the kit replace the brake rotors or calipers?
No. This is a caliper mounting hardware conversion. Rotors, calipers and any required relocation spacers are separate components.
GiroDisc Porsche Caliper Stud Kit 8 BCS-08
$180.00
GiroDisc Porsche Caliper Stud Kit 8 – BCS-08
The GiroDisc Porsche Caliper Stud Kit 8 (BCS-08) converts compatible Porsche brake caliper mounting points from conventional bolts to stainless steel studs and removable nuts. It is designed for owners who service their brakes regularly, including track-day drivers and club racers.
This kit is selected by the vehicle's brake equipment, axle and caliper mounting arrangement. BCS-08 is the rear kit for these applications. Confirm the front kit separately rather than ordering two identical kits automatically.
Protect Your Porsche Caliper Mounting Threads
Repeated caliper removal means repeatedly threading a mounting bolt into the suspension upright. A stud conversion allows the stud to remain in place while the caliper is removed using the mounting nuts. This helps reduce repeated wear at the upright threads and makes it easier to guide the caliper back into position.
The BCS-08 is useful during rotor replacement, brake inspections and other service requiring caliper removal. Its benefits are especially practical for Porsche owners who perform frequent brake maintenance throughout a track season.
GiroDisc BCS-08 Features
17-4 PH stainless steel caliper mounting studs
ARP stainless steel 12-point nuts
Corrosion-resistant mounting hardware
Studs remain installed during routine caliper removal
Helps guide the caliper into position during installation
Reduces repeated threading into the suspension upright
Mounting hardware for two calipers on one axle
Application: Specified rear caliper mounting configurations
GiroDisc Porsche Caliper Stud Kit 8 Specifications
Manufacturer: GiroDisc
Manufacturer Part Number: BCS-08
Product Type: Brake Caliper Mounting Stud Conversion Kit
Stud Material: 17-4 PH Stainless Steel
Nut Type: ARP Stainless Steel 12-Point
Installation Location: Rear
Mounting Configuration: Specified rear caliper mounting configurations
Coverage: One Axle Per Kit
What's Included With GiroDisc BCS-08
Four brake caliper mounting studs
Four ARP 12-point nuts
Four washers
Medium-strength thread-locking compound
One kit provides hardware for two calipers. Converting both axles requires two kits, and the front and rear may require different part numbers.
GiroDisc BCS-08 Porsche Vehicle Fitment (Rear)
991 GT3/GT3 RS and GT2 RS in the specified iron-brake or PCCB configuration
981 Cayman GT4 with iron or PCCB
Fitment depends on the exact brake configuration, axle and spacer arrangement. The applications above are a selection guide. Confirm the part number against the current GiroDisc application information for the vehicle and rotor setup before purchase.
Factory Mounting Positions and GiroDisc Spacer Upgrades
Some Porsche GiroDisc rotor upgrades use caliper spacers to accommodate a larger rotor. A change in caliper position can change the required mounting hardware. A stud kit listed for a factory mounting position should not automatically be carried over to a spacer conversion.
The BCS-08 is intended for specified rear caliper mounting configurations. Check the front and rear requirements individually, including whether the car has factory iron brakes or Porsche Ceramic Composite Brakes (PCCB).
Installation Information
Follow GiroDisc's instructions for thread preparation, thread-locking compound, stud engagement and nut torque. Confirm the required caliper spacing and hardware before installation. A technician familiar with the vehicle's braking system should perform the work.
GiroDisc Porsche Caliper Stud Kit 8 FAQs
What does the GiroDisc BCS-08 caliper stud kit do?
It replaces the conventional caliper mounting bolts in compatible applications with studs and removable nuts, helping protect the upright threads during repeated brake service.
How many calipers does one BCS-08 kit cover?
One kit contains mounting hardware for two calipers on one axle. Check which kit is specified for each axle before ordering a complete front and rear conversion.
Where is BCS-08 installed?
Its installation location is rear. Use the vehicle fitment section above to identify the relevant brake configuration.
Are the BCS-08 studs stainless steel?
Yes. The studs use 17-4 PH stainless steel, and the kit includes ARP stainless steel 12-point nuts.
Can I choose BCS-08 using only my Porsche model name?
No. Vehicle generation, brake equipment, axle and any caliper spacers must also match. Kits with different numbers should not be treated as interchangeable.
Will BCS-08 work with a GiroDisc rotor upgrade?
Only when this part number is specified for that rotor and caliper arrangement. Check whether the upgrade retains the factory mounting position or requires spacers.
Can the same stud kit be used on the front and rear?
Some applications specify the same kit on both axles, while others require different kits. Confirm the front and rear part numbers separately.
Does the kit replace the brake rotors or calipers?
No. This is a caliper mounting hardware conversion. Rotors, calipers and any required relocation spacers are separate components.