AiM Racing Data & Video

AiM Reverse/Side View Mirror Camera The AiM Reverse/Side View Mirror Camera delivers exceptional rear and side visibility on any sealed prototype racer or road car, featuring a wide 170° field of view and high-resolution imaging for seamless integration with AiM dash systems. Designed for Precision and Durability Key Features Manufacturer: AiM Part Number: XB1ZCAMHD00 Optical Sensor: 1/4 inch color CMOS TV System: NTSC Lens Field of View: 170° horizontal Resolution: 648×488 px Frame Rate: 60 fps Operating Temperature: –30 °C to 80 °C AiM Reverse/Side View Mirror Camera FAQs What dash systems are compatible? The camera outputs a standard NTSC signal that works with all modern AiM dash inputs. How wide is the field of view? With a 170° horizontal lens, you get expansive rear and side coverage on sealed-body race cars. Can it handle extreme temperatures? Yes—it operates reliably from –30 °C up to 80 °C for track or off-road use. Is installation plug-and-play? Simply mount the camera in your mirror housing and connect to your AiM dash via RCA video input. Upgrade your visibility on track with the AiM Reverse/Side View Mirror Camera—order now for clearer, safer corner exits.

AiM Kart Racing Steering Angle Sensor Kit Measure and log your kart driver's steering input with the AiM Steering Angle Sensor. Includes a rotary potentiometer with a male 4-pin 719-style connector, two toothed pulleys, one toothed belt, and one sensor mounting bracket. The steering shaft pulley is designed to fit a 7/8"-OD shaft. (Smaller shafts will need to add a bushing to fit the pulley.) This sensor is designed to measure up to five complete turns of the steering column. This sensor requires the addition of an Expansion Box or eBox when used with MyChron3 Extreme, MyChron4, MyChron5, or MyChron6 kart dash loggers. If your steering column is larger than 7/8" OD, consider using the AiM String Pot Steering Angle Sensor instead. The string pot sensor can work with any diameter steering shaft.

AiM Sports Pressure Sensor High-Accuracy Pressure Input for AiM Data Logging Systems Note: Sensors typically ship in 3–5 business days. The AiM Sports Pressure Sensor is designed to integrate seamlessly with AiM data logging systems, allowing you to capture precise pressure data for engine, brake, fuel, oil, or other monitored systems. Adding the correct pressure sensor to your AiM setup helps deliver the actionable data you need to fine-tune performance and improve on-track consistency. Each sensor is built for motorsport environments and includes a fixed-length cable for clean, reliable installation in race and track-day vehicles. Key Features Compatible with AiM data loggers and dash systems Designed for accurate, repeatable pressure measurement Ideal for engine, brake, fuel, oil, and auxiliary pressure monitoring Motorsport-grade construction for track use Technical Specifications Cable length: 40 cm (16 inches) Application: AiM data acquisition systems

AiM Sports Track Day Suction Mount The AiM Track Day Mount serves as an all-in-one solution for securely attaching both your AiM SmartyCam3 Sport or SmartyCam3 Corsa and Solo2 DL to your windshield.1 It is uniquely designed so your SmartyCam3 is securely mounted facing out the windshield and your Solo2 DL is facing you. The Track Day Mount is compact, straightforward to use, and consolidates your equipment neatly, eliminating the need for two separate mounts and minimizing cable clutter. The powerful suction cup provides a secure hold on any smooth, clean surface. The robust suction cup ensures a secure grip on any smooth, clean surface. With a custom-designed contoured arm and ball mounts, the AiM SmartyCam3 faces forward, capturing the view through the windshield, while the AiM Solo2 DL faces the driver. This specialized suction-cup mount from AiM is an ideal choice for track days! Add the Trackday Kit Short Cable to your order using the dropdown above and connect your Solo2 DL and SmartyCam3 with the absolute minimum of cable clutter! 1 AiM Solo2 DL and SmartyCam3 (pictured) each sold separately.

Aim Sports SmartyCam3, SmartyCam HD Rev. 2.1 ECU Harness Seamless ECU Connectivity for AIM SmartyCam Series Elevate your video and data logging setup with the AIM SmartyCam3, SmartyCam HD Rev. 2.1 ECU Harness. This high-quality cable is engineered to power and connect your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1, and SmartyCam GP 2.2 directly to your vehicle's ECU via its CAN bus, ensuring a seamless integration and access to a rich data set. Optimal Standalone Configuration: Designed for setups without a data logger connection, this harness includes unterminated leads for 12V, ground, CAN+, and CAN-. Enhanced Performance with GPS09 Module: For the best configuration, consider adding the GPS09 module to your system. Key Features 4m Length: Ample length for versatile installation. Camera Compatibility: SmartyCam3 Corsa (all models) SmartyCam3 GP SmartyCam HD Rev. 2.1 SmartyCam HD Rev. 2.2 (GP) Upgrade your racing setup with this AiM SmartyCam3, SmartyCam HD Rev. 2.1 ECU Harness for unparalleled data and video performance.

AiM Sports Data Hub Extend the capabilities of your AiM MXL, MXL2, MXG, MXS dash logger or EVO4 data logger without occupying any more channels or running more cables to your dash. Connect up to four CAN peripherals to each Data Hub. You can even "stack" Data Hubs, connecting up to four more hubs to each hub, multiplying the number of available connections! Accepts any AiM CAN accessory, including GPS, LCU-One Lambda Controller, Memory Key, or TC (Thermocouple) Hubs. Any channel can be selected for display on the dash. This data hub can also be used to link your SmartyCam to any AiM dash.

AiM Two-Port CAN Powered Data Hub for AiM MXS, MXM, MXG, MXL, EVO3, EVO4 Do you have an AiM data-logging dash like the MXS, MSM, MXG, Pista or MXL and want to run multiple devices like a SmartyCam HD and other powered items? This AIM Two-Port Powered CAN Data Hub is for you. If you use an ECU bridge or are powering your SmartyCam(s) from your five-pin cable using ECU power, you now can have a more stable power supply to run your cameras for an extended stint.This unit is also for use with the SmartyCam3 Sport to connect to an external 12V direct power source, removing the need for charging in between on-track sessions and race stints. Accepts any AiM CAN accessory, including GPS, LCU-One Lambda Controller, Memory Key, or TC (Thermocouple) Hubs. Any channel can be selected for display on the dash. 15" cable. This allows you to add multiple SmartyCams to your AiM system. AiM 2-Port Powered CAN Data Hub for AiM Dash Details Manufacturer: AiM Sports Manufacturer Part Number: X08HB2GK0

AiM Patch Cable With Microphone AiM CAN patch cable with integrated external microphone to connect any supported AiM data-logger to a SmartyCam HD Rev 2.1 / SmartyCam GP HD Rev 2.1. Not compatible with SmartyCam GP HD Rev 2.2. AiM CAN Patch Cable Details Manufacturer: AiM Sports Manufacturer part no.: V02566240 Length: 4 meters (13.1 feet) Connectors: 7-pin 712 male to 5-pin 712 male

AiM Patch Cables With 3.5mm Microphone Input The original AiM SmartyCam, the SmartyCam HD Rev 2, and the SmartyCam HD GP Rev 2.1 all have an internal microphone to capture great racing sound, but it does limit your mic placement options. This specially-designed cable has a 3.5mm mono input jack to connect a second external microphone to your SmartyCam. The input from this jack is automatically mixed with the sound from the SmartyCam's internal microphone. SmartyCam Microphone Cable Fitment Original SmartyCam (2009-13, with the viewing screen on top) Exp port to AiM dash/logger or SMC Bridge SmartyCam HD Rev 2 or later (2015+) Exp port to AiM dash/logger or SMC Bridge SmartyCam HD GP Rev 2.1 or earlier (to 2018) Exp port to AiM dash/logger or SMC Bridge AiM SmartyCam CAN Cable with Microphone Jack, 4M Details Manufacturer: AiM Sports Manufacturer part number: V02566300 Alternate part number: MC-552 Dash, Solo DL, Solo2 DL End: 5 Pin Male 712 SmartyCam End: 7 Pin Male 712 Microphone jack: 3.5mm female mono Cable length: 4 meters (13.1 feet) Length from 7 pin 712 to "Y" Adapter: 50mm Length from Y adapter to 5 pin 712" 4 Meter Length from Y adapter to microphone 3.5mm female jack: 900mm The 7-pin 712 connector plugs into the CAN port on the original AiM SmartyCam. A 5-pin connector on the other end connects your SmartyCam to your AiM data logger, SMC Bridge, etc. Measures four meters (13..1 feet) long. 3.5mm mono microphone jack is attached to the lead. This cable is not compatible with the first SmartyCam HD, which has a 5-pin plug.

AiM Sports SmartyCam GP Base Mount Kit The Best Mount for Your SmartyCam Bullet Camera This strong, adjustable mount holds your AiM Sports SmartyCam bullet camera base unit securely to your roll bar or harness bar. Two pivoting ball joints give you lots of adjustment while keeping it safe and secure during races and track days while the V-shaped base and two different size hose clamps fit a wide range of tubing sizes, from 1" to 2" OD. The rectangular base adapter provides a stable, bolt-on base for secure mounting of the SmartyCam unit. The wide range of adjustment lets you aim the viewing screen in just about any direction. Includes V-base with ball, double clamp arm, top ball with two-bolt diamond mounting flange, rectangular mount base adapter, two hose clamps, and rubber isolator strap.

AiM SmartyCam Bullet Cam Suction Mount This adjustable mount holds your AiM SmartyCam bullet camera securely to your windshield, allowing you to quickly mount your camera and keep it pointed in the right direction during races, track days, and other driving events. Two pivoting ball joints allow a wide range of adjustment, and the 3 1/2" diameter lever-actuated suction cup base works on any smooth, clean, flat surface. The machined aluminum collar accepts a lipstick-type camera measuring 24mm (0.94") OD. You can also eliminate the collar to mount a lightweight, compact camera with a standard 1/4-20 tripod mount (including SmartyCam and SmartyCam HD). What's In The Box? Suction cup base Lower ball clamp 60mm (2.4 inch) clamp arm Top ball with 1/4-20 mounting stud Machined collar Mounting screws

AiM Sports SmartyCam Bullet Camera Roll Bar Mount This strong, adjustable mount holds your AiM SmartyCam bullet camera securely to your roll bar or harness bar. Two pivoting ball joints give you lots of adjustment, keeping it pointed in the right direction during races and track days. The cast aluminum base and stainless steel clamp create a solid base for this heavy-duty mount. What's In The Box? Cast aluminum lower mount Jubilee clamp 60mm (2.4 inch) single clamp arm Ball head with 1/4-20 threaded stud Ridged lock washer

AiM Solo2 DL CAN/RS232 Wiring Harness If you routinely move your Solo2 DL from one car to another and need another harness for only power or both power and data input, this is your cable. If you are putting a Solo2 DL into an older vehicle and need a power supply cable, use this and use only the + and - wires and fold back the CAN inputs. The AiM V02569050 harness connects your Solo2 DL to your ECU via CAN or RS232 wiring. One end has a 7-pin 712 (screw-in) connector to fit the Solo2 DL, and the other end has six non-terminated wires (CAN+, CAN-, RS232RX, RS232TX, Power, and Ground). Does not fit original AiM Solo DL. AiM Solo2 DL CAN/RS232 Wiring Harness Details Manufacturer: AiM Sports Manufacturer part number: V02589050 Fits Solo DL: No Fits Solo2 DL: Yes Pins on AiM Solo2 DL Side: 7-pin thread-on connector Vehicle Chassis Ends: six non-terminated wires Vehicle Chassis Ends Break Out: Red=12VDC, Black=Ground, Blue=ECU RS232 TX, Blue=ECU RS232 CAN-, Gray=ECU RS232 RX, Gray CAN+ AiM Solo 2 DL CAN/RS232 Wiring Harness Wiring Code Red: +9 to +15 VDC Black: Ground Grey: CAN+ Blue: CAN- Black: ECU RS232 RX Blue: ECU RS232 TX Both blue wires are the same color, but each wire has an identifier tag stating the connection type

AiM Sports Solo2 Direct Power Cable 5-Pin 712 Male Add this direct power cable to your vehicle and never worry about charging your AiM Solo2 before or during an event again. This cable allows you to cleanly hard-wire your Solo2 to your car’s 12 VDC power system, keeping your lap timer and data logger powered continuously without relying on a cigarette lighter or external battery packs. Permanent Power for Your Solo2 Data Logger The AiM Sports Solo2 Direct Power Cable is designed for drivers who want a clean, reliable installation. By connecting directly to your vehicle’s 12-volt system, the Solo2 stays powered anytime the car is on, ensuring uninterrupted data logging during track days, autocross, or race sessions. Key Features 5-pin 712 male connector compatible with AiM Solo2 devices Direct-wire connection to vehicle 12 VDC power Eliminates the need for cigarette lighter charging cables Prevents mid-session battery loss or shutdowns Clean, professional installation for race or track cars Compatibility Designed specifically for the AiM Solo2 lap timer and data logger using a 5-pin 712 male connector. AiM Sports Solo2 Direct Power Cable FAQs Does this cable eliminate the need to charge my Solo2? Yes. Once installed, the Solo2 receives power directly from the vehicle, so charging before or during events is no longer necessary. Can this be installed in a street car? Yes. The cable can be installed in both street and track cars as long as a 12 VDC power source is available. Does this cable turn the Solo2 on and off automatically? The Solo2 will receive power whenever the vehicle’s electrical system is active, depending on how the cable is wired. Is professional installation required? Professional installation is recommended for the cleanest and safest wiring, but experienced DIY installers can also handle the installation. If you’re tired of charging cables, dead batteries, or unreliable power during events, this direct power solution keeps your AiM Solo2 ready every time you hit the track.

AiM Sports SmartyCam Cable For Solo2 DL / Dash Logger Have more than one vehicle with a dash or Solo2 DL? Want to make swapping your SmartyCam between vehicles easier? Grab this extra four-meter cable for your second car, route the cable as needed and leave it in place to power your SmartyCam when you drive that car. This cable takes the headache out of the process for people with more than one vehicle but only one SmartyCam.Connectors are 7-pin 712 male to 5-pin 712 male designed to fit the AiM SmartyCam HD Rev 2.1 or SmartyCam GP HD Rev 2.1. Four meters (13.1 feet) in length. Note: Cables typically take 3 to 5 business days to ship.