
AiM Sports
AiM Sports Solo 2-Solo 2 DL Suction Mount
$45.00
RAM Windshield Suction Mount
Among the great advantages to the AiM Solo family of GPS lap timers is that, unlike other timers, you don't have to connect any wires to use it. That makes it ideal for use in daily-driven track-day cars (or for moving from one car to another). The RAM windshield mount lets you to mount your AiM Solo2 or Solo2 DL (and older Solo versions) to your windshield quickly and securely. Installation is as easy as pushing a lever; removal is as easy as lifting the lever.
Two pivoting ball joints allow a wide range of adjustment. Two 6mm screw holes match the holes in the standard mounting plate included with your AiM Solo2 or Solo2 DL.
There's no better, more convenient way to mount your AiM Solo2 / Solo2 DL.

AiM Sports
AiM Sports Solo 2 DL Data Logging Lap Timer
$799.00
AiM Sports Solo 2 DL Data Logging Lap Timer
THE BRAND NEW DATA-LOGGING GPS LAP TIMER FOR MOTORSPORTS
The new Solo 2 DL receives data from two satellite constellations, GPS and Glonass; this is a huge step forward since it is unbelievably faster and more precise than the previous version. Power-on requires only a few seconds and lap times are calculated with a max 2/100 sec. of tolerance thanks to 10Hz GPS sampling. A sleek newly-designed case with easier-to-use metal buttons add a premium look and feel to the world's most popular data-logger and GPS lap timer.
The screen can be back-lighted in one of the seven colors:
ECU CONNECTION
Solo 2 DL -- the Solo with an ECU connection -- has over a thousand ECU protocols in its database. Easily connect your Solo 2 DL to your ECU and get reams information with just one cable. In case your ECU protocol isn't in the database, no problem: an ECU Driver Builder is available in the included Race Studio 3 software, allowing you to create your protocol yourself. This gives you access to a huge amount of data from your car that can be overlaid with GPS data to create an incredibly powerful analysis and learning tool!
Choose your ECU cable:
OBD2: the standard vehicle diagnostic port beneath your dash supplies the Solo 2 DL with a wealth of information. This is the standard cable most people will use.
CAN/RS232: the Solo 2 DL can be connected to your CAN Bus for an even richer, broader spectrum of information than OBD2. This cable can require a bit more know-how to connect, however.
Coil RPM: the Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V each signal) or pulse signals (150-450 V ignition coil trigger – primary circuit).
FIND YOUR TRACK QUICKLY
Solo 2 DL has access to a database of more than 3,000 tracks all over the world! As soon as it switches on, the Solo 2 DL identifies its position, recognizes the starting line coordinates of the track, and is ready to start sampling lap times. If your track isn't in the database, no problem: the Solo 2 DL will automatically enter into autolearning mode, figures out the characteristics of the track, and starts lap-timing anyway.
PREDICTIVE LAP TIME LEDS
The new Solo 2 DL's predictive lap time engine is now even more reliable. And with configurable RGB LEDs, it will give you a clear, fast indication of how your current lap compares with your best possible lap. That's functionality you typically find only on expensive driver-coaching electronic aids; now it's at your fingertips with the Solo 2 DL!
RACE MODE SELECTION
Solo 2 DL can manage different types of races:
Speed races in a closed circuit
Point to-point races
Regularity
Performance tests (0-100 km/h etc.)
In each of these configurations, Solo 2 DL gives the relevant information during the race/test along with powerful data review immediately after each session.
WiFi & iPHONE CONNECTION
WiFi communication with your laptop is easy, fast, and with no connectors or cables. It's the best way to configure your Solo 2 DL, manage the track database, and download lap data to your PC.
Connect your Solo 2 DL to your iPhone for quick and easy data analysis, managing your track database, etc.
SMARTYCAM INTEGRATION
The perfect connection: the Solo 2 DL takes all the data from your ECU, merges it with GPS lap information, and transmits everything seamlessly to a SmartyCam HD or SmartyCam GP HD . The resulting video includes your ECU and lap data in a graphical overlay!
Feel free to give us a call at (844) 438-7244 to discuss the cool new features and capabilities of AiM's latest, greatest compact datalogger/lap timer today!

AiM Sports
AiM Sports Solo 2 Lap Timer
$459.00
AiM Sports Solo 2 Lap Timer
The new Solo 2 receives data from two satellite constellations, GPS and Glonass; this is a huge step forward since it is unbelievably faster and more precise than the previous version. The power-on requires only a few seconds and the lap times are calculated with a max 0.02 seconds tolerance. A sleek new case with easier-to-use metal buttons give the new SOLO 2 a premium look and feel.
The screen can be backlighted in one of the seven available colors:
FIND YOUR TRACK
Solo 2 has access to a database of more than 3,000 tracks all over the world! As soon as it switches on, the Solo 2 identifies its position, recognizes the starting line coordinates of the track, and is ready to start sampling lap times. If your track isn't in the database, no problem: the Solo 2 will automatically enter into autolearning mode, figures out the characteristics of the track, and starts lap-timing anyway.
PREDICTIVE LAP TIME LEDS
The new Solo 2's predictive lap time engine is now even more reliable. And with configurable RGB LEDs, it will give you a clear, fast indication of how your current lap compares with your best possible lap. That's functionality you typically find only on expensive driver-coaching electronic aids -- now it's at your fingertips with the Solo 2!
RACE MODE SELECTION
Solo 2 can manage different types of races:
Speed races in a closed circuit
Point to-point races
Regularity
Performance tests (0-100 km/h etc.)
In each of these configurations, Solo 2 gives the relevant information during the race/test along with powerful data review immediately after each session.
ON-SCREEN DATA
At the end of your session or race, you can quickly review key lap information right on the Solo 2 color TFT display.
WiFi AND iPHONE
WiFi communication with your laptop is easy, fast, and with no connectors or cables. It's the best way to configure your Solo 2, manage the track database, and download lap data to your PC.
Connect your Solo 2 to your iPhone for a quick and comfortable data analysis, managing your track database, etc.
Feel free to give us a call at (844) 438-7244 to discuss the cool new features and capabilities of AiM's latest, greatest compact lap timer today!

AiM Sports
AiM Sports MyChron 5S Karting Dash and Data Logger
$599.00
AiM Sports MyChron5S Digital Datalogging Dash For Kart Racing
Data acquisition for karts enters a totally new dimension: the AiM MyChron5S. Besides sampling all your kart data, MyChron5S features all the advantages of GPS timing and tracking, plus a lot of new functions designed to provide more complete and reliable information both during and after each race:
Lap and split times
Speed
RPM
Head, H2O, or Exhaust Temperature (or two temps with 2T!)
Track Position
Acceleration
Much more!
MyChron5S has been designed to provide both basic info (for new racers) and the most sophisticated data to karting professionals. Fully configurable layout lets you customize the data, color, LED indicators, etc. to suit your individual needs. Plus, the MyChron5S 2T adds sampling of a second temperature to the basic MyChron5S. Using a two-satellite sensor, the MyChron5 provides super-accurate GPS data for lap/split times, position, speed, etc. We have a huge track database for easy download of detailed track info.
For ten years, the MyChron4 was the benchmark gauge in karting data acquisition. AiM re-establishes the benchmark with the MyChron5S -- a leap ahead of the 4 (all its imitators). At the same time, the MyChron5 is fully compatible with all MyChron4 peripherals, as well as a Lambda controller, Data Hub, MyChron Expansion, and SmartyCam. Features include:
Automatic Start
Rechargeable Li-Ion battery lasts up to 10 hours
1 MB memory for over 3 hours of data logging
One Temperature channel (two on the 2T; both include thermocouple)
Seven fully-configurable LEDs (alarm, shift, etc.)
LCD screen with configurable color
Wireless data download via secure Wi-Fi connection
Intuitive menu design for easy configuration
Call us with any questions you have about the incredible new MyChron5S from AiM Sports!
* Configurable as Shift Lights or RPM/Lap Times Alert

AiM Sports
AiM Sports Pressure Sensor
$139.00
AiM Sports Pressure Sensor
NOTE: Sensors typically take 3 to 5 business days to ship.
Add the appropriate AiM Sports Pressure Sensor to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level!
All sensors have a 40 cm (16 inch) cable length

AiM Sports
AiM Sports MyChron 5S 2T Dual-Temperature Karting Dash and Data Logger
$699.00
AiM Sports MyChron5S 2T Dual-Temp Digital Datalogging Dash For Kart Racing
Data acquisition for karts enters a totally new dimension: MyChron 5S 2T. Besides sampling all your kart data, MyChron5S 2T features all the advantages of GPS timing and tracking, dual-temperature inputs, plus a lot of new functions designed to provide more complete and reliable information both during and after each race:
Lap and split times
Speed
RPM
Combine EGT with either CHT or H2O temps
Track Position
Acceleration
Much more!
MyChron5S 2T has been designed to provide both basic info (for new racers) and the most sophisticated data to karting professionals. Fully configurable layout lets you customize the data, color, LED indicators, etc. to suit your individual needs. The MyChron 5S 2T comes with a Y-Cable for temperature sensors, an EGT thermocouple, and your choice of either a CHT (cylinder head temp) or H2O (water jacket) thermocouple. Using a two-satellite sensor, the MyChron 5S 2T provides super-accurate GPS data for lap/split times, position, speed, etc. We have a huge track database for easy download of detailed track info.
For ten years, the MyChron4 was the benchmark gauge in karting data acquisition. AiM re-establishes the benchmark with the MyChron 5S 2T -- a leap ahead of the 4 (and all its imitators). At the same time, the MyChron5 2T is fully compatible with all MyChron4 peripherals, as well as a Lambda controller, Data Hub, MyChron Expansion, and SmartyCam.
FEATURES:
Automatic Start
Rechargeable Li-Ion battery lasts up to 10 hours
1 MB memory for over 3 hours of data logging
Two Temperature channels
Seven fully-configurable LEDs (alarm, shift, etc.)
LCD screen with configurable color
Wireless data download via secure Wi-Fi connection
Intuitive menu design for easy configuration
Call us with any questions you have about the incredible MyChron5S 2T from AiM!

AiM Sports
AiM Sports SmartyCam HD Roll Bar Mount Kit
$72.00
AiM Sports SmartyCam HD Roll Bar Mount Kit
This adjustable mount holds your AiM SmartyCam HD Rev 2.1 securely to your roll bar or harness bar. Allows you to quickly, securely mount your camera and keeping it pointed in the right direction during track days and other racing events.
Two pivoting ball joints allow a wide range of adjustment and cast aluminum base mounts incredibly securely.
KIT INCLUDES:
Cast aluminum lower mount
Jubilee clamp
60mm single clamp arm
Ball head with 1/4-20 threaded stud
Ridged washer

AiM Sports
AiM Sports MXG 1.2 Strada Large Color TFT Dash
$1,599.00
The Full-Size Color TFT Dash For Road Use
MXG 1.2 Strada ("street" in Italian) is a beautifully-designed, feature-rich color digital dash display. It is basically the MXG 1.2 without the datalogging function. The MXG 1.2 Strada features a wide 7" High Contrast TFT color screen with great visual impact, configurable to show lap times, RPM, and a huge range of info coming from your Engine Control Unit, analog/digital inputs, pre-defined math channels and an optional GPS08 Module. Programmable multicolor shift and alarm LEDs round out an incredibly powerful package.
The MXG 1.2 Strada displays your RPM, selected gear, speed, plus all the data you choose (water temp, oil pressure, trans temp, lap times and much more) in either pre-configured or user-customized pages. Swapping between pages is as easy as pushing buttons. Plus the MXG 1.2 Strada puts a huge amount of control over your car's systems at your fingertips. There's even a version with "Street Icon" LEDs instead of the traditional "plain" LEDs!
INPUT & OUTPUT FLEXIBILITY
Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). Available only in a CAN/RS232 version for the maximum level of customization and data access.
The CAN input allows you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam, or even channel expansion hubs, without using any analog channels. A separate CAN output allows you to send messages to your car's existing CAN network, adding to the vehicle system control possibilities!
ALARMS & SHIFT LIGHTS
The ten multicolored RGB shift lights can be customized to define the max RPM for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them to turn on/off depending on analog or digital inputs, ECU values, expansion values, math channels or GPS information (with the optional GPS08). You choose conditions, colors, and select a solid alarm or flashing one (including flash frequency). It's also possible to configure an accompanying text message.
DIGITAL OUTPUT
The MXG 1.2 Strada features a low-side (switch to ground) digital output that can be configured to activate/deactivate external systems (switch on/off additionallights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs.
RACE STUDIO 3
MXG 1.2 Strada is configured using your PC and Race Studio 3. You can create, customize, delete, import and export configurations with all channels, ECU drivers, Math Channels, Display Pages, Digital Output, Alarms, Shift Lights and all the expansions you need.
TECHNICAL SPECS:
9.3" x 5.0" x 1.0" Anodized Aluminum housing
Large 7.0" high-contrast color TFT display
800x480 pixel screen resolution
Weight 2.1 lbs (950g)
Waterproof IP65
KIT INCLUDES:
MXG 1.2 Strada digital dash
USB cable
14-pin standard wiring
23-pin connector + contacts
Installation CD with Race Studio 3 software
All sensors and modules sold separately.

AiM Sports
AiM Sports 719 to719 Patch Cables
$29.00
AiM Sports 719 Extension Cables
NOTE: Cables typically take 3 to 5 business days to ship
Add the appropriate AiM Sports 719 Extension Cables to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level!
Use these extension cable to connect additional sensors to the following AiM Sports Dashes:
MXG
MXS
MXL2
MXL Strada/Pista/Pro 05
Part numbers:
V02PCB05B – cable length: 0.5m - 1.6ft
V02PCB10B – cable length: 1m - 3.3ft
V02PCB15B – cable length: 1.5m - 4.9ft
V02PCB20B – cable length: 2m - 6.6ft
V02PCB25B – cable length: 2.5m - 8.2ft
V02PCB30B – cable length: 3m - 9.8ft

AiM Sports
AiM Sports SmartyCam 3 Sport Data Logger Camera
$899.00
AiM Sports SmartyCam 3 Sport
The new AiM SmartyCam 3 Sport takes AiM your motorsports video to the next level. Specs include a resolution of 1920x1080 FHD with 60 frames per second (fps) utilizing H.264 (MPEG-4 Advanced Video Coding), bringing you the best video quality of any AiM camera ever. This is not a plastic "action-sports" camera, it's a real motorsports camera built to live up to the rigors that a race car demands. The AiM SmartyCam 3 Sport is the latest generation of the best motorsports cameras. If you have an AiM dash and want to add great videos that include all the technical information that will help you improve your performance, the AiM SmartyCam 3 Sport is your answer.
AiM SmartyCam 3 Sport Video Camera with Data Overlay Details:
Manufacturer: AiM
Manufacturer part number (67° FOV): XS3S674U
Manufacturer part number (84° FOV): XS3S844U
Included cable length: 4M (13 feet)
Connector to dash harness or data hub: SmartyCam 712 female
Audio: Internal microphone
Automatic On/Off
AiM SmartyCam 3 Sport can be switched on/off automatically by the logger it is connected to. Simply decide what period of non-activity triggers the camera to switch-off. Both operations can also be carried out using the keyboard if you prefer.
Recording can also be started/stopped automatically or via keyboard: the camera will start recording when a set speed or RPM threshold is exceeded. You simply decide how long after dropping below the selected threshold the video will automatically stop.
Straight Cut Dog Box, Solid Motor Mounts, Engine Harmonics
Engine rumble causes vibrations, which are not good for video recording. With the AiM SmartyCam 3 Sport, you'll never again experience that seasick "wave effect" you see when watching in-race videos recorded by a generic camera in a car screaming at 7000 RPM. The AiM SmartyCam 3 Sport is designed for that environment and for those vibrations. "Wave effect" is now just a memory.
Generic action cameras are designed to record videos in many different situations, such as skiing or surfing. But in motorsports they tend to record misleading videos, straightening out the view ahead. When on track, this distorted view makes the corners seem to disappear. So, when you review your track performance those videos are useless because the images are distorted.
Being a camera dedicated to motorsports, AiM SmartyCam 3 Sport features lenses specifically designed to eliminate distortion. The camera is available in two versions: 67º and 84º field-of-view. The former is most suited to in-car, closed-cockpit use. The latter is best used mounted to the exterior of either open- or closed-cockpit cars.
Real Time Data Overlay
With no driver input, the AiM SmartyCam 3 Sport will automatically overlay all the data you need onto your videos: speed, RPM, lap number, gear shifts and much more. Simply choose the data and the graphic layout you prefer from the huge selection of overlays available.
What Kind of Data?
AiM SmartyCam 3 Sport overlays data from different sources onto your videos. All this info can be overlayed on videos at each single point of the track.
From a GPS: track map and vehicle position, speed, lap- and split-times.
From an Aim logger connected to your ECU: RPM, throttle, engaged gear, acceleration, temperatures, pressures, and additional sensor values (if available).
Smarty Manager 3 Software
With Smarty Manager 3, the AiM SmartyCam 3 Sport dedicated software, you can add your logo and track map to your videos. There's also a wide choice of graphical objects available, allowing you to choose from a list of pre-determined sets with the same layout, or to combine single objects from different sets. Now your videos will be truly “yours” in all details, from data to their graphic design.

AiM Sports
AiM Sports SmartyCam GP HD Bullet Cam Roll Bar Mount Kit
$72.00
AiM Sports SmartyCam GP HD Roll Bar Mount
This strong, adjustable mount holds your AiM SmartyCam GP HD bullet camera securely to your roll bar or harness bar. Two pivoting ball joints give you lots of adjustment, keeping it pointed in the right direction during races and track days. The cast aluminum base and stainless steel clamp create a solid base for this heavy-duty mount.
INCLUDED IN THE PACKAGE:
Cast aluminum lower mount
Jubilee clamp
60mm single clamp arm
Ball head with 1/4-20 threaded stud
Ridged lock washer

AiM Sports
AiM Sports Data Hub
$76.99
Aim Sports Data Hub
Extend the capabilities of your AiM MXL, MXL2, MXG, MXS or EVO 4 data logger without occupying any more channels or running more cables to your dash. Connect up to four CAN peripherals to each Data Hub. You can even "stack" Data Hubs, connecting up to four more hubs to each hub, multiplying the number of available connections!
Accepts any AiM CAN accessory, including GPS, LCU-One Lambda Controller, Memory Key, or TC (Thermocouple) Hubs. Any channel can be selected for display on the dash.
This data hub can also be used to link your SmartyCam HD or SmartyCam GP HD to any AiM dash.

AiM Sports
AiM Sports Patch Cable: 5-pin 712 To 712 CAN
$39.00
AiM Sports 5-pin 712 To 712 CAN Patch Cable
These cables each have a female 5-pin 712 (screw-in) connector on one end and a male 5-pin 712 connector on the other. The 5-pin 712 connector is used on all AiM dash and data logger CAN inputs. These cables will extend the reach of CAN hubs and other accessories.
Part numbers:
V02552700 – cable length: 1 Meter
V02552720 – cable length: 2 Meters
V02552730 – cable length: 3 Meters
V02552740 – cable length: 4 Meters

AiM Sports
AiM Sports MXS 1.3 Strada Compact Color TFT Dash
$1,299.00
The Compact Color TFT Dash For Road Use
WIDE RANGE OF DATA & DISPLAYS
MXS 1.3 Strada is a beautifully-designed, feature-rich color digital dash display. It is basically the MXS 1.3 without the datalogging function. The MXS 1.3 Strada features a compact 5" High Contrast TFT color screen with great visual impact, configurable to show lap times, RPM, and a huge range of info coming from your Engine Control Unit, analog/digital inputs, pre-defined math channels and an optional GPS08 Module. Programmable multicolor shift and alarm LEDs round out an incredibly powerful package. There's even a version with "Street Icon" LEDs instead of the traditional "plain" LEDs!
The MXS 1.3 Strada displays your RPM, selected gear, speed, plus all the data you choose (water temp, oil pressure, trans temp, lap times and much more) in either pre-configured or user-customized pages. Swapping between pages is as easy as pushing buttons. Plus the MXS 1.3 Strada puts a huge amount of control over your car's systems at your fingertips.
INPUT & OUTPUT FLEXIBILITY
Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). Choose between OBDII and CAN/RS232 versions to suit your needs and level of customization. Both receive rich data from your ECU.
An OBDII input connection is an easy, plug-and-play option. A hardwired CAN input allows you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam, or even channel expansion hubs, without using any analog channels. A separate CAN output allows you to send messages to your car's existing CAN network, adding to the vehicle system control possibilities!
ALARMS & SHIFT LIGHTS
The ten multicolored RGB shift lights can be customized to define the max RPM for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them to turn on/off depending on analog or digital inputs, ECU values, expansion values, math channels or GPS information (with the optional GPS08). You choose conditions, colors, and select a solid alarm or flashing one (including flash frequency). It's also possible to configure an accompanying text message.
DIGITAL OUTPUT
The MXS 1.3 Strada features a low-side (switch to ground) digital output that can be configured to activate/deactivate external systems (switch on/off additional lights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs.
RACE STUDIO 3 INTEGRATION
MXS 1.3 Strada is configured using your PC and Race Studio 3. You can create, customize, delete, import and export configurations with all channels, ECU drivers, Math Channels, Display Pages, Digital Output, Alarms, Shift Lights and all the expansions you need.
TECHNICAL SPECS:
Compact 6.7" x 3.8" x 0.9" anodized aluminum housing
5" TFT high-contrast color display
Choose Standard or Street Icon LEDs
Screen resolution 800x480 pixels
Weight 1 lb. (480g)
Waterproof IP65
KIT INCLUDES:
MXS 1.3 Strada digital dash
USB cable
14-pin standard wiring
23-pin Connector + contacts
Installation CD with Race Studio 3 software
All sensors and modules sold separately.

AiM Sports
AiM Sports Patch Cables: 712 to 719
$39.00
AiM Sports 712 to 719 Four-Pin Patch Cables
NOTE: Cables typically take 3 to 5 business days to ship.
Add the appropriate AiM Sports 712 to 719 4-Pin Extension Cables to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level!
The AiM Sports 712 to 719 4-Pin Patch Cables have a female 4-pin 719 (plastic) connector at one end and a male 4-pin 712 (threaded) connector at the other to connect most analog automotive sensors to the MyChron3, XG-Log Auto Dash, AiM EVO4, or AiM EVO4s Data Logger. Available in 0.5 thru 4 Meter lengths.
CONNECTS TO:
MyChron3
Data Hub
XG-Log Auto Dash
EVO4 Logger
EVO4s Logger
PART NUMBERS:
V02PCB05BTXG – cable length: 0.5m (1.6 ft)
V02PCB10BTXG – cable length: 1 meter (3.3 ft)
V02PCB15BTXG – cable length: 1.5 meter (4.9 ft)
V02PCB20BTXG – cable length: 2 meters (6.6 ft)
V02PCB25BTXG – cable length: 2.5 meters (8.2 ft)
V02PCB30BTXG – cable length: 3 meters (9.8 ft)
V02PCB35BTXG – cable length: 3.5 meters (11.5 ft)
V02PCB40BTXG – cable length: 4 meters (13.1 ft)