A1-229 GiroDisc Alpine A110 320mm Front Brake Rotors 1 "a"

$1,200.00

A1-229 GiroDisc Alpine A110 320mm Front Brake Rotors

$1,200.00

GiroDisc Alpine A110 Front Brake Rotors – 320mm Two-Piece Floating Slotted Rotors

GiroDisc racing brakes hero image featuring a black Porsche-style sports car from a front three-quarter angle, glowing orange front brake rotor, GiroDisc brake caliper, and dramatic wet nighttime racetrack with sparks and water spray.

Upgrade your Alpine A110 braking system with GiroDisc 320mm Two-Piece Floating Front Brake Rotors. Designed as direct replacements for the original front brake discs on compatible Alpine A110 models, the GiroDisc A1-229 rotor assemblies combine lightweight construction, advanced cooling technology, and replaceable friction rings for demanding street and track driving.

Featuring proprietary cast iron friction rings, precision-machined 6061-T6 aluminum hats, and a race-developed floating attachment system, these premium rotors help reduce unsprung weight while improving thermal management during repeated high-speed braking.

The curved slotted friction surface and directional internal cooling vanes provide performance-focused braking characteristics while retaining compatibility with the applicable original brake calipers.

Sold and priced as a pair of complete brake rotor assemblies. Includes left and right rotors with aluminum mounting hats and floating hardware.

High-Performance 320mm Floating Brake Rotors for Alpine A110

The GiroDisc A1-229 front rotor system is engineered for compatible Alpine A110, A110 S, and A110 R models equipped with the corresponding factory 320mm brake configuration.

Unlike a complete big brake kit, GiroDisc's direct replacement design allows the original brake calipers and factory braking configuration to remain in place. This helps preserve the vehicle's designed brake balance and ABS operation while introducing motorsport-developed rotor technology.

Each rotor features a lightweight aluminum mounting hat coupled to a proprietary cast iron friction ring. The floating construction permits controlled thermal expansion, helping accommodate the substantial temperature changes generated during demanding braking.

GiroDisc A1-229 Front Rotor Features

  • 320mm Rotor Diameter: Designed for compatible Alpine A110 factory brake systems.
  • 28mm Nominal Thickness: Matches the applicable original rotor dimensions.
  • Two-Piece Floating Construction: Lightweight aluminum hats paired with performance cast iron friction rings.
  • Curved Slotted Friction Surface: Motorsport-inspired slot design for consistent brake pad contact.
  • Direct OE Replacement: Fits compatible factory brake configurations without modifications.
  • Factory Caliper Compatibility: Designed to work with the corresponding original brake calipers.
  • Reduced Unsprung Weight: Two-piece construction reduces rotating mass compared with conventional one-piece cast iron rotors.
  • 6061-T6 Aluminum Hats: Precision-machined aluminum mounting hats manufactured from U.S.-sourced material.
  • Proprietary Cast Iron Rings: Cast in the USA and machined in-house by GiroDisc.
  • 48 Curved Cooling Vanes: Directional internal ventilation promotes airflow through the rotor.
  • High-Strength Drive Pins: Alloy steel attachment hardware transfers braking forces between the rotor ring and hat.
  • Cadmium-Plated Hardware: Protective finish helps resist corrosion.
  • Controlled Floating Movement: Accommodates thermal expansion and allows the rotor to self-center between the brake pads.
  • Anti-Noise Spring Washers: Reduce unwanted floating rotor rattle during normal driving.
  • Replaceable Friction Rings: Reuse the existing GiroDisc aluminum hats with compatible replacement rotor rings.
  • American Manufacturing: Major rotor components are produced by GiroDisc in the United States.
  • Sold as a Pair: Includes two complete rotor assemblies.

Race-Developed Cooling Technology for Alpine A110

The Alpine A110's lightweight, performance-focused chassis benefits from a braking system capable of maintaining consistent temperatures during spirited driving and track sessions.

GiroDisc uses 48 curved internal cooling vanes designed to act as a centrifugal pump. As the rotor spins, the ventilation passages direct cooling air outward through the cast iron friction ring, helping dissipate heat generated during braking.

The curved slotted friction surface complements the internally ventilated construction, providing a performance-oriented rotor design suited to demanding braking applications.

Curved Vane Cooling Benefits

  • Promotes airflow through the brake rotor
  • Helps dissipate heat during repeated heavy braking
  • Supports consistent braking temperatures
  • Uses race-developed directional cooling technology
  • Complements the thermal expansion benefits of floating rotor construction

Lightweight Aluminum Hats and Floating Rotor Technology

Traditional one-piece cast iron brake rotors combine the friction surface and mounting section in a single component. GiroDisc replaces this construction with separate cast iron friction rings and lightweight 6061-T6 aluminum mounting hats.

This design helps reduce unnecessary rotating mass and allows the friction ring to expand independently of the mounting hat during high-temperature braking.

High-strength steel drive pins connect the components while allowing controlled axial and radial movement. Anti-noise spring washers minimize the loose-hardware rattle associated with conventional fully floating racing rotors.

Floating Rotor Construction Benefits

  • Reduced rotating mass and unsprung weight
  • Controlled thermal expansion of the friction ring
  • Axial and radial floating movement
  • Rotor self-centering between the brake pads
  • Reduced unwanted floating hardware noise
  • Compatibility with the applicable factory braking system
  • Reusable aluminum mounting hats
  • Serviceable cast iron friction rings

GiroDisc A1-229 Alpine A110 Brake Rotor Specifications

Manufacturer GiroDisc
Part Number / SKU A1-229
Product Type Two-Piece Floating Brake Rotor Assembly
Listed Rotor Position Front
Quantity Pair (2 Complete Rotor Assemblies)
Vehicle Application Alpine A110 / A110 S / A110 R
Rotor Outside Diameter 320mm
Nominal Rotor Thickness 28mm
Minimum Rotor Thickness 26mm
Rotor Surface Curved Slotted
Rotor Construction Two-Piece Floating
Rotor Ring Material Proprietary Cast Iron
Rotor Hat Material 6061-T6 Aluminum
Cooling Vane Count 48 Curved Directional Vanes
Attachment System Floating Drive Pin System
Drive Pin Material High-Strength Alloy Steel
Drive Pin Finish Cadmium-Plated
Fasteners High-Strength Cap Screws and Hardened Washers
Anti-Noise Hardware Spring Washers
Installation Direct OE Replacement
Caliper Compatibility Compatible Factory Brake Calipers
Left Assembly A1-229SL
Right Assembly A1-229SR
Replacement Rotor Rings GiroDisc D1-229
Manufacturing USA
Intended Use Performance Street and Track Driving

Vehicle Fitment

  • Alpine A110 1.8 Turbo (2017+) – Compatible 320mm factory brake configuration.
  • Alpine A110 S 1.8 Turbo (2019+) – Compatible 320mm factory brake configuration.
  • Alpine A110 R 1.8 Turbo (2022+) – Compatible 320mm factory brake configuration.

Important Fitment Note: GiroDisc A1-229 is listed for the Alpine A110 320x28mm brake platform. Some Alpine A110 configurations use the same rotor dimensions at the front and rear, but brake-package compatibility must be confirmed before installing these assemblies on either axle. Verify model year, factory rotor size, and caliper configuration before ordering.

GiroDisc D1-229 Replacement Rotor Rings

One of the most valuable advantages of GiroDisc two-piece brake rotors is their long-term serviceability. Once the complete A1-229 assemblies have been installed, the aluminum mounting hats can be reused when the cast iron friction rings require replacement.

The compatible replacement ring set is GiroDisc D1-229 Alpine A110 Replacement Rotor Rings.

The replacement ring set is supplied with new attachment hardware and is designed for the corresponding GiroDisc aluminum mounting hats.

Important: D1-229 replacement rings are intended for compatible GiroDisc mounting hats, not universal factory or aftermarket hats.

Replacement Rotor Ring Advantages

  • Reusable GiroDisc aluminum mounting hats
  • Dedicated D1-229 replacement friction rings
  • Replacement attachment hardware supplied with ring kits
  • Serviceable two-piece brake rotor construction
  • Reduced need to replace complete rotor assemblies during future maintenance

Why Choose GiroDisc for Your Alpine A110?

The GiroDisc A1-229 provides a premium rotor upgrade designed to complement the Alpine A110's lightweight sports car platform. Combining reduced rotating mass, improved brake cooling, and serviceable two-piece construction, GiroDisc delivers a performance-focused alternative to conventional one-piece brake rotors.

By retaining the compatible factory brake calipers and original mounting arrangement, the GiroDisc system offers a direct-fit braking upgrade without the additional components required for a complete big brake conversion.

Performance Advantages

  • Direct-fit design for compatible Alpine A110 brake configurations
  • 320mm diameter and 28mm nominal thickness
  • Lightweight aluminum mounting hats
  • Reduced unsprung weight and rotating mass
  • 48 curved internal cooling vanes
  • Curved slotted rotor friction surfaces
  • Controlled floating hardware for thermal expansion
  • Anti-noise spring washers
  • Reusable aluminum hats with replaceable friction rings
  • American-made major rotor components
  • Complete pair of brake rotor assemblies

GiroDisc Alpine A110 Brake Rotor FAQs

Will GiroDisc A1-229 rotors fit my Alpine A110?

GiroDisc A1-229 is designed for compatible Alpine A110 models equipped with the applicable 320x28mm brake configuration. Verify the original brake package before ordering.

Will these rotors fit the Alpine A110 S and A110 R?

Yes. Compatible A110 S and A110 R applications are listed for the A1-229 rotor platform. Fitment depends on the factory brake configuration.

Are GiroDisc A1-229 rotors sold individually or as a pair?

They are sold and priced as a pair, including complete left and right rotor assemblies with aluminum mounting hats.

What size are GiroDisc A1-229 brake rotors?

The rotor diameter is 320mm, with a nominal thickness of 28mm and a minimum service thickness of 26mm.

Can GiroDisc A1-229 rotors be used on the rear of an Alpine A110?

Some Alpine A110 configurations use matching rotor dimensions at both axles. Rear installation requires confirmation of the factory rotor and brake package compatibility.

Do I need to replace the factory brake calipers?

No. GiroDisc A1-229 is designed as a direct replacement for compatible original equipment brake discs and works with the corresponding factory calipers.

What are the advantages of two-piece floating brake rotors?

Two-piece construction combines lightweight aluminum hats with cast iron friction rings to reduce rotating mass while accommodating thermal expansion during braking.

How many cooling vanes do GiroDisc A1-229 rotors have?

GiroDisc specifies 48 curved directional cooling vanes that promote airflow through the friction ring during rotation.

Are the GiroDisc A1-229 rotors slotted?

Yes. These rotors feature curved slotted friction surfaces and internally ventilated cast iron rings.

Can I replace just the rotor rings?

Yes. GiroDisc D1-229 replacement rings allow the existing compatible aluminum mounting hats to be reused when the friction rings require replacement.

Will these floating rotors make noise?

GiroDisc uses anti-noise spring hardware to reduce rattling while maintaining the controlled movement needed for thermal expansion.

Are GiroDisc A1-229 rotors suitable for track use?

Yes. Their curved vane cooling, slotted friction surfaces, and floating two-piece construction are designed for demanding performance driving conditions.

Where are GiroDisc brake rotors manufactured?

GiroDisc manufactures its major rotor components in the United States, including the cast iron friction rings and aluminum mounting hats.

The Ultimate Auto Racing Helmet Buyer's Guide

We’ve sold tens of thousands of helmets here at Competition Motorsport and, in the process of doing that, answered a million questions (probably) about them. With that in mind, this article will give you the real lowdown on selecting a proper auto racing helmet. We’ll go over the why’s and how’s of size, shape, certification, pricing, features, and maintenance so you have the tools you need to select the perfect helmet.

Learn More

Driver Gear

If you wear it to protect yourself while racing, the Competition Motorsport Driver Gear collection is where you'll find it!

Racecar Gear

If you mount it on or install it in your vehicle for track days or wheel-to-wheel racing, the Competition Motorsport Racecar Gear collection is where you'll find it!

American Express Apple Pay Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Visa