pagid

Pagid Racing Brake Pad Shape 4921 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 GT3 Cup [PFC calipers 22/20 mm] 2013 + X Porsche 991 GT3 Cup MR [PFC calipers 22/20 mm] 2013 + X Porsche Cayman GT4 Clubsport [PFC calipers 22/20 mm] 2016 + X Porsche Cayman GT4 MR [PFC calipers 22/20 mm] 2016 + X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications.

Pagid Racing Brake Pad Shape No. 8081 Pagid 8081 Brake Pad Fitment Guide (FMSI D1045) Make Model Engine / Variant Years Front Pad Shape Rear Pad Shape Audi A6 (C6 / 4F2) RS6 quattro 5.0L 2008–2011 FRP3133 FCP1655 Audi A6 Avant (C6 / 4F5) RS6 quattro 5.0L 2008–2010 FRP3133 FCP1655 Cadillac ATS-V 3.6L 2015+ FRP3133 — Cadillac ATS-V Coupe 3.6L 2015+ FRP3133 — Cadillac CTS-V 6.2L 2009+ FRP3133 — Cadillac CTS-V Coupe 6.2L 2008+ FRP3133 — Cadillac CTS-V Sport Wagon 6.2L 2011+ FRP3133 — Chevrolet Corvette C8 Z06 Stingray 5.5L V8 2023+ FRP3133 FRP3170 Chevrolet Corvette C8 Z06 5.5L V8 2024+ FRP3133 FRP3170 Chevrolet Camaro 6.2L, 298 kW 2012–2015 FRP3133 — Chevrolet Camaro 6.2L, 318 kW 2012–2015 FRP3133 — Chevrolet Camaro Convertible 6.2L, 298 kW 2012+ FRP3133 — Chevrolet Camaro Convertible 6.2L, 318 kW 2012+ FRP3133 — Chevrolet Camaro SS 1LE (6th Gen) 6.2L 2016+ FRP3133 FRP3137 Chevrolet Corvette C7 6.2L 2014+ FCP1334 / FRP3133 — Chevrolet Corvette C7 Z06 6.2L 2014+ FRP3133 — Chevrolet Corvette C7 Convertible 6.2L, 335 kW 2013+ FCP1334 / FRP3133 — Chevrolet Corvette C7 Convertible 6.2L, 343 kW 2014+ FCP1334 / FRP3133 — Chevrolet Corvette Z06 Stingray 6.2L V8 2023+ FRP3133 FRP3170 Jeep Grand Cherokee SRT8 (WK2) 6.4L 2011+ FRP3133 — Mercedes-Benz SL 55 AMG (R230) 5.4L 2006–2012 FRP3133 — Mercedes-Benz GL 63 AMG 4MATIC (X166) 5.5L 2012+ FRP3133 FCP4587 Mercedes-Benz ML 63 AMG 4MATIC (W166) 5.5L, 386 kW 2011+ FRP3133 FCP4587 Mercedes-Benz ML 63 AMG 4MATIC (W166) 5.5L, 410 kW 2011+ FRP3133 FCP4587 Mercedes-Benz CL 600 (C216) 5.5L 2006+ FRP3133 — Mercedes-Benz SL 600 (R230) 5.5L 2006–2012 FRP3133 — Mercedes-Benz SL 65 AMG (R230) 6.0L 2004–2012 FRP3133 — Mercedes-Benz SL 65 AMG Black Series (R230) 6.0L 2008–2012 FRP3133 — Mercedes-Benz C63 AMG (W204) 6.2L, 336 kW 2008+ FRP3133 — Mercedes-Benz C63 AMG (W204) 6.2L, 358 kW 2008+ FRP3133 — Mercedes-Benz C63 AMG Coupe (C204) 6.2L, 336 kW 2011+ FRP3133 — Mercedes-Benz C63 AMG Coupe (C204) 6.2L, 358 kW 2012+ FRP3133 — Mercedes-Benz C63 AMG Coupe (C204) 6.2L, 380 kW 2012+ FRP3133 — Mercedes-Benz C63 AMG Estate (S204) 6.2L, 336 kW 2008+ FRP3133 — Mercedes-Benz C63 AMG Estate (S204) 6.2L, 358 kW 2012+ FRP3133 — Mercedes-Benz CLK 63 AMG (C209) 6.2L 2007–2009 FRP3133 — Mercedes-Benz CLS 63 AMG (C219) 6.2L 2006–2010 FRP3133 — Mercedes-Benz E63 AMG (W211) 6.2L 2006–2008 FRP3133 — Mercedes-Benz E63 AMG Estate (S211) 6.2L 2006–2009 FRP3133 — Mercedes-Benz E63 AMG Estate (S212) 6.2L 2011+ FRP3133 — Mercedes-Benz SL 63 AMG (R230) 6.2L 2008–2012 FRP3133 — Mercedes-Benz SLS AMG (C197) 6.2L 2010+ FRP3133 —   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: Pagid RS 14 Compound: The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound: Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSC 1 Compound (Ceramic Rotors Only): A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RST 1 Compound: Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Pagid Racing Brake Pads Shape No. 8087 Fits the Following Vehicles: Make Model Build (Year) Front Rear Aston Martin Vantage V8 GT4 ProDrive [race car] 6 piston front 2011 - 17     X Aston Martin Vantage V8 GT4 ProDrive [race car] 6 piston front. larger rear caliper 2011 - 17     X Aston Martin Vantage V12 GT3 [race car] 2013 - 14     X Aston Martin Vantage V12 GT3 [race car] sprint 2015 - 17     X Audi R8 LMS Ultra GT3 [race car] 2012 - 15     X Hyundai i30 N TCR race car [Brembo caliper] 2017 -     X Lamborghini Gallardo LP 600 GT3 [race car] 2013 - 15     X Maserati Trofeo MC 2013 +     X Maserati Trofeo GT4 2016 +     X Hyundai Veloster N TCR 2018 +     X Porsche 992 GT3 Cup 2021 +     X Porsche 992 GT3 Cup [Endurance] 2021+     X Fits the Following Calipers: Make Type Remarks Shape No. Brembo 07.7293 6-piston [type 164 or B24] 20mm, 22mm, 25mm, 29mm, 31mm 2488, 2687, 8038, 8087, 8173 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound: Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound: Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 2 Compound: The Pagid RST 2 Racing Brake Pads are a medium to high-friction pad designed for Rally, Sprint and Stock car racing. With aggressive in-stop behavior, instant pedal engagement, and a consistently firm feel regardless of temperature, the RST-2 gives maximum power regardless of the conditions. Excellent initial bite with excellent modulation and release characteristics. The medium torque Pagid RST-2 pads are fade resistant up to 800°C, and have the lowest thermal conductivity in the RST line Pagid RST 2E Compound: RST 2E is perfect as a front axle application in mid-endurance GT and touring car racing, in the range of 2-6h race duration. Front and rear axle application on rally race cars. RST 2 and RST 2E are semi-metallic resin bonded materials containing steel fibers. Cold friction and initial bite make these materials most appropriate for rallying and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST 5 Compound: Developed for high friction level sprint applications where extreme thermal stability is key. Comes in a variety of different pad shapes used in GT racing front axles, touring car front axles, rally sports, especially FIA Rally 3, Rally 2, Rally 1, and RX Rallycross. Excellent fade resistance as well as one of the highest initial bite and friction levels of the PAGID Racing compound portfolio. RST 5 is suitable for high-thermal load applications, making it a top choice for sprint racers in terms of performance. RST 5 delivers the ideal balance between maximum performance and excellent modulation.

Pagid Racing Brake Pad Shape No. 8091 Fitment Guide for Pagid 8091 Brake Pad Make Model Build (Year) Front Rear Chevrolet Camaro Z28 [Gen 5] [ceramic brakes] 2015 - 17 X Chevrolet Corvette C6 Brembo [ceramic brakes] 2009 - 13 X Chevrolet Corvette C6 Brembo [6-piston iron rotors] 2009 - 13 X Chevrolet Corvette C7 Z06 [ceramic brakes] 2015 + X Ferrari 430 Challenge [ceramic brakes] X Ferrari 430 Scuderia [ceramic brakes] 2007 - 10 X Ferrari 458 Italia [ceramic brakes] 2010 - 15 X Ferrari 488 Challenge race car [ceramic brakes] 2016 + X Ferrari 599 GTB Fiorano [iron rotors] 2006 - 12 X Ferrari Several ceramic (CCM) brakes X McLaren 570S [ceramic brakes] 2015 + X McLaren 650S / Spyder [ceramic brakes] 2014 - 17 X McLaren 675LT [ceramic brakes] 2015 + X McLaren MP4-12C [ceramic brakes] 2011 - 14 X Fits the Following Calipers: Make Type Remarks Shape No. Brembo XA5.71.xx 6-piston D85 16mm 8091 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 1 Compound: Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. In the 8091 pad shape, the RSL 1 comes in an RSL 1 Special compound, both specified for Brembo and Ford Multimatic applications. Pagid RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSC 1 Compound (Ceramic Rotors Only): A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 2 Compound (Ceramic Rotors Only): Pagid RSC 2 is a special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing. RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications. Pagid RSC 3 Compound (Ceramic Rotors Only): RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.

Pagid Racing Brake Pad Shape No. 8100 Pagid 8100 Brake Pad Fitment Guide Make Model Engine / Variant Years Front Pad Shape Rear Pad Shape Aston Martin Vantage V8 GTE 4.0L 2018+ FRP3153 FRP1078 Aston Martin Vantage AMR GT3 6.0L 2018–2023 FRP3153 FRP1078 Aston Martin Vantage AMR GT3 EVO 6.0L 2024+ FRP3153 FRP1078 Audi R8 LMS GT2 5.2L 2019+ FRP3153 FRP1078 Audi R8 LMS GT3 5.2L 2015–2018 FRP3153 FRP3156 / FRP1078 Audi R8 LMS GT3 EVO1 5.2L 2019–2021 FRP3153 FRP1078 Audi R8 LMS GT3 EVO2 5.2L 2022+ FRP3153 FRP1078 Bentley Continental GT3 4.0L 2018+ FRP3153 FRP1078 BMW M8 GTE 4.0L 2018+ FRP3153 FRP3156 Chevrolet Camaro GT4 R 6.2L 2018+ FRP3153 FRP3137 Dodge Viper SRT GT3 R 8.0L 2013–2017 FRP3153 FRP3156 Ferrari 488 GTE — — FRP3153 FRP1078 Ferrari 458 GT3 Endurance 4.5L — FRP3153 FRP1078 Ferrari 458 GTE 4.5L 2014–2016 FRP3153 FRP3156 Ferrari 488 GT3 4.5L 2018+ FRP3128 / FRP3153 FRP1078 Honda NSX GT3 3.5L 2024+ FRP3153 FRP3156 Lamborghini Huracan GT3 Evo1 5.2L 2018+ FRP3153 FRP3156 Lamborghini Huracan GT3 Evo2 5.2L 2023+ FRP3168 / FRP3153 FRP1078 / FRP3029 McLaren 650 S GT3 Race Car — 2020+ FRP3153 FRP1078 McLaren 720 S GT3 EVO — 2019+ FRP3153 FRP1078 Toyota GR Supra GT4 3.0L 2020+ FRP3153 FRP3156   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid Pre-Bedding Service Some Pagid racing brake pads are available pre-bedded and “ready to race”. Good preparation and adjustment of the car is the basic requirement for any successful race. Bedding the brake components requires good concentration, experience and a lot of training time. But time is often crucial and you need to save it for other purposes. Incorrectly bedded brakes reduce the controllability and the lifetime of the pads and discs. The maximum braking performance can only be achieved by correctly bedded brake parts. To save time and money, we offer pre-bedding brake pads via a computer controlled system. Using the right sensory input, we can precisely bed in your pads free from environmental influences like traffic, rain, and even driver training. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST 5 Compound: Developed for high friction level sprint applications where extreme thermal stability is key. Comes in a variety of different pad shapes used in GT racing front axles, touring car front axles, rally sports, especially FIA Rally 3, Rally 2, Rally 1, and RX Rallycross. Excellent fade resistance as well as one of the highest initial bite and friction levels of the PAGID Racing compound portfolio. RST 5 is suitable for high-thermal load applications, making it a top choice for sprint racers in terms of performance. RST 5 delivers the ideal balance between maximum performance and excellent modulation.

Pagid Racing Brake Pad Shape 8287 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 992 GT3 Cup 2021 + X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RST D1 Compound: Pagid RST D1 is especially for race cars with high aerodynamic downforce levels and with a wide brake balance range. Specifically developed for rear axle applications. The RST D1 compound provides benefits in terms of vehicle stability during the turn-in and corner-exit unloading of the front axle.

Pagid Racing Brake Pads Shape No. 4922 Fits The Following Vehicles: Make Model Build (Year) Front Rear Porsche 991 3.8 Carrera S / GTS [iron brakes] 2011 - 19 X Porsche 981 Boxster Spyder [iron brakes] 2015 - 20 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications.

Pagid Racing Brake Pads Shape No. 1283 Fits the Following Calipers: Make Model Year Front Rear Maserati Trofeo GT4 2016-    X Maserati Trofeo MC 2013-    X Mitsubishi Lancer Evo IX Gravel Rally 2005-2007    X Mitsubishi Lancer Evo X Gravel Rally / FIA Gr. N 2007-2016    X Mitsubishi Lancer Evo X Tarmac Rally [Brembo Caliper] 2007-2016    X Tatuus F3 [Brembo Caliper] 2018-    X    X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RS 42 Compound: Pagid RS 42 is a medium-friction compound with medium initial bite and good cold friction. It is a classic rally pad that is also very popular in small formula and touring cars. RS 42 is a low-metallic resin bonded material containing steel and aramid fibers. Pagid RST 1 Compound: Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to its combination of bite, friction and controllability. Pagid RST 4 Compound: RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typical use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing on tarmac and gravel and for front-engine cars. RST 4 is also used in NASCAR on long ovals. Pagid RST 5 Compound: RST 5 was developed for high-friction sprint and rally applications where extreme thermal stability is critical. It delivers very high initial bite, strong fade resistance and excellent recovery while keeping generated heat in the brake pad rather than transferring it into the brake fluid. RST 5 is designed for demanding rally, rallycross and other high-thermal-load competition applications.

Pagid Racing Brake Pad Shape No. 1595USA Fits the Following Vehicles: Make Model Build (Year) Front Rear Chevrolet GM Metric D154, several models X Pontiac GM Metric D154, several models X Fits the Following Calipers: Make Type Pad Thickness Shape No. Wilwood GM II, GM III, [D52] 15mm 1595USA Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.

Pagid Racing Brake Pad Shape No. 3830 USA Pagid 3830 Racing Brake Pad Fitment Guide Make Model Build (Year) Front Rear Mazda MX-5 Miata ND 16 - X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid R 01 Compound The R01 features a specially formulated compound designed for the Mazda MX5 ND race car. The R 01 excels in both street and light racing applications. This unique blend ensures consistent performance, allowing for quick heat recovery and reliable stopping power, whether you're navigating city streets or tackling a race track.

Pagid Racing Brake Pad Shape No. 4623 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 924 2.0 1976 - 83 X Porsche 924 2.0 Turbo / 2.5 S 1979 - 88 X Porsche 928 4.5 1977 - 79 X Porsche 944 2.5/2.5 S/2.7 1981 - 91 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSH 42 Historic Compound: The characteristics of Pagid RSH 42 make this material appropriate for small formula cars. Furthermore you can use it as rear axle compound in combination with the RSH 29E on the front axle. An excellent classic rally pad which is also very popular in small formula cars.

Pagid Racing Brake Pad Shape No. 4634 Pagid 4634 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Ferrari 365 GTB4/Daytona 1967 - 76 X Ferrari 512 BB 1976 - 85 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSH 42 Historic Compound The characteristics of Pagid RSH 42 make this material appropriate for small formula cars. Furthermore you can use it as rear axle compound in combination with the RSH 29E on the front axle. An excellent classic rally pad which is also very popular in small formula cars.

Pagid Racing Brake Pad Shape No. 4907 Fits the Following Vehicles: Make Model Build (Year) Front Rear Audi A8 D3 [ceramic brakes] 2002 - 09 X Audi R8 4.2 and 5.2 FSI quattro [ceramic brakes] 2009 - 15 X Audi R8 5.2 FSI quattro (2nd Gen) 2015 + X Audi R8 5.2 FSI quattro (2nd Gen) [ceramic brakes] 2015 + X Audi S8 [ceramic brakes] 2002 - 10 X Lamborghini Gallardo [ceramic brakes] 2004 - 13 X Lamborghini Huracán and Performance [ceramic brakes] 2014 + X Lamborghini Several ceramic brakes X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 2 Compound (Ceramic Rotors Only) Pagid RSC 2 is a special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing. RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications. Pagid RSC 3 Compound (Ceramic Rotors Only) RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications. It is a special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.

Pagid Racing Brake Pads No. 4931 Pagid 4931 Brake Pad Fitment Guide Make Model Build (Year) Front Rear Alpina B3 [E90/E92] 2007 - 10 X BMW M135i [F20 & F21] 2011 - 16 X BMW M140i [F20] 2015 - 17 X BMW M2 [F87] 2015 - 21 X BMW M235i [F22] 2013 - 16 X BMW M240i [F22] 2015 + X BMW M3 [F80] 2014 - 18 X BMW M4 [F82] 2014 - 20 X BMW M4 [F82] Competition 2016 + X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.

Pagid Racing Brake Pad Shape No. 4932 Fits the Following Vehicles: Make Model Build (Year) Front Rear Alpina B5 F1 X 2015 + X Alpina B6 Biturbo [F12/F13] 2012 + X BMW M5 [F10] 2011 - 16 X BMW M5 [F10] [ceramic brakes] 2011 - 16 X BMW M6 [F13] 2012 - 18 X BMW M6 [F13] [ceramic brakes] 2012 + X BMW M3 [G80] 2021 + X BMW M4 [G82] 2021 + X BMW M2 [G87] 2022 + X   Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSC 2 Compound (Ceramic Rotors Only) Pagid RSC 2 is a special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing. RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications.

Pagid Racing Brake Pad Shape No. 4933   Fits the Following Cars: Make Model Build (Year) Front Rear Alpina B3 [E90/E92] 2007 - 10 X BMW M135i [F20 & F21] 2011 - 16 X BMW M140i [F20] 2015 - 17 X BMW M2 [F87] 2015 - 21 X BMW M235i [F22] 2013 - 16 X BMW M235i Racing [PFC front caliper] 2014 - 15 X BMW M235i Racing [AP front caliper] 2016 + X BMW M240i [F22] 2015 + X BMW M3 [F80] 2014 - 18 X BMW M4 [F82] 2014 - 20 X BMW M4 [F82] Competition 2016 + X BMW M240i Racing [AP front caliper] 2019 + X Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races.