Bell

Bell Racing GTX.3 SA2020 Helmet   With its refined, aerodynamic design and lightweight carbon composite shell, the Bell Racing Helmets GTX.3 Composite SA2020 helmet provides the best performance and pro features for open wheel, open compartment, karting, formula and dirt track racers. This Bell GTX.3 Composite SA2020 has an integrated shield and dual screen anti-fog (DSAF) visor with rear-facing vents which are ideal for these forms of racing, allowing for air exchange and unobstructed vision without worrying about dust and dirt. Bell Racing GTX.3 Auto Racing Helmet Features Snell SA2020 and FIA 8859-2015 homologation Includes clear SE03 3mm DSAF shield (SV SE03/05 pivot system) with DSAF anti-fog insert Sleek aero styling with integrated wing Front chin bar Gurney ("duckbill") improves high-speed aerodynamic performance Venturi airflow system lets fresh air in, hollow synthetic rubber gasket seal keeps dirt, water and dust out High-strength, lightweight carbon-composite construction using new high-pressure molding system Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection Ultra-plush grey Comfort-Max FR® interior fabric wicks away moisture Install integrated drinking tube and radio microphone systems with the integrated face piece channels Multi-density foam interior and contoured cheek pads offer a professional fit Standard-sized eye port M6 terminal hardware and hex wrench for Head and Neck Restraint devices Additional visor shields for the Bell Racing GTX.3 available here. Add a Competition Motorsport Performance Racing Helmet Bag and keep your new Bell Racing GTX.3 racing helmet safe and secure throughout each race weekend.

Bell Racing Helmets GTX3 Carbon Helmet SA2020 The sleek, aerodynamic Bell Racing Helmets GTX3 Carbon Helmet SA2020 features an ultra-lightweight carbon fiber shell, a front chin-bar gurney and an integrated rear wing to provide the open-cockpit driver with improved aerodynamic performance and high-speed stability. The Bell Racing Helmets GTX3 Carbon is ideal for use in dusty, open-wheel environments with its integrated shield, double screen anti fog (DSAF) visor, rubber gasket seal, and rear-facing vents to help with air exchange and provide clear vision while racing in the elements. This stylish helmet carries Snell SA2020 approval, FIA 8859-2015 Homologation, and comes with M6 terminal hardware for your Head and Neck Restraint (HANS) device. These safety and comfort features make the Bell Racing Helmets GTX3 Carbon Helmet SA2020 is ideal for dirt track, karting, open-wheel, formula, and all types of open-compartment racing where clean, distraction-free airflow is essential for competition. Bell GTX3 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 1207Axx Homologation: Snell SA2020 and FIA 8859-2015 Shield: SE03 3mm DSAF Shield pivot system: SV SE03/05 Construction: high pressure-molded carbon fiber Interior: ultra-plush grey Comfort-Max FR® fabric Eye port: standard size Hardware included: M6 terminals for HANS, hex wrench Chin bar Gurney (duckbill): included Sizes: 57cm- to 61cm+ Bell GTX3 Carbon Fiber Features and Options: Sleek aerodynamic styling with integrated wing Venturi airflow system allows air exchange while preventing dust and dirt from entering the helmet Hollow synthetic rubber gasket keeps out dust, dirt, and water Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection Integrated channels for optional drink tube and radio systems Pro-style, multi -foam density interior with contoured cheek pads for professional fit Double Screen Anti-Fog (DSAF) visor insert for improved anti-fog performance This helmet will ship with signature required for delivery.

Bell HP10 Carbon Open Face Helmet Introducing the Bell HP10 Carbon Open Face Helmet, the ultimate choice for rally racing aficionados seeking uncompromised safety, comfort, and performance. Crafted with precision and innovation, the new HP10 Carbon incorporates the advanced technology of Bell's HP7 state-of-the art Advanced Helmets in a sleek and modern design that provides the ultimate open-face helmet protection. The Bell HP10 Carbon features an ultra-lightweight carbon shell, adjustable carbon fiber peak, brand new adjustable integrated sunscreen, and highly comfortable professional fit. The HP10 is perfect for racers who want the feeling of an open-face helmet but demand outstanding comfort and superior performance. Constructed from advanced high-strength carbon fiber, the HP10 Carbon boasts exceptional strength and durability while remaining incredibly lightweight. This means you can race comfortably for extended periods without the burden of a heavy helmet. Its open face design provides optimal visibility, allowing you to stay fully aware of your surroundings and make split-second decisions on the challenging terrain encountered during rally races. The HP10 Carbon also features a superior ventilation system, ensuring a constant flow of fresh air to keep you cool and focused on conquering the toughest off-road stages. With its FIA 8860-2018 certification, the Bell HP10 Carbon Open Face Helmet provides the peace of mind that you're equipped with top-tier protection, meeting the strictest safety standards for motorsports. Elevate your rally racing experience with this premium helmet that merges style, comfort, and unmatched safety, making it the ideal choice for off-road racing enthusiasts who demand the best. Bell HP10 Helmet Features Homologation: FIA 8860-2018 approved. Exterior: matte finish carbon fiber. Interior: dark grey high-strength Comfort FR® fabric. Ultra-lightweight advanced full carbon shell. Factory-installed HANS anchors. Multi-density, multi-piece liner maximizes energy absorption and impact performance. Adjustable carbon fiber sun peak. Adjustable integrated anti-scratch sunscreen: ML Red mirror (M10S-Short) installed plus Dark Smoke (M10-Long) in the box. Removable cheek pads with multi-density materials for optimal comfort. Flexible sound-insulating ear muffs provide excellent sound insulation. Air extraction holes maximize cooling. Bell HP10 Carbon Open Face Helmet Options Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (each by special order). Adjustable sunscreens available in various colors and two lengths to ensure optimal visual comfort. Bell HCB (Half Chin Bar) compatible. Sizes (in cm): 54, 55, 56, 57, 58 ,59, 60, 61, and 61+.

Bell HP10 Rally Helmet  Introducing the Bell HP10 Rally helmet - the epitome of advanced helmet technology, drawing inspiration from Bell's esteemed HP7 Advanced Helmets. Proudly FIA 8860-2018 approved, this modern masterpiece is not just an open-face rally helmet; it's a statement of performance. Crafted with an ultra-lightweight carbon shell, it features a quick-detach Half Chin Bar (HCB), adjustable carbon fiber peak, and a state-of-the-art adjustable integrated sunscreen. Prioritizing both comfort and sound insulation, it stands as the go-to choice for rally drivers and co-drivers aiming for the pinnacle of their craft. Bell Racing Helmets dedicated R&D team collaborated with audio experts and elite rally drivers, ensuring unparalleled sound insulation and communication. Embedded with ZeroNoise® electronics, potent speakers, and a noise-cancelling microphone, the Bell HP10 Rally helmet promises unmatched safety, comfort, and communication.  Bell HP10 Rally Helmet Features Homologation: FIA 8860-2018 Exterior: matte finish carbon fiber Interior: dark grey high-strength Comfort FR® fabric. Open face design with ultra-lightweight advanced full carbon shell. Removable carbon Half Chin Bar (HCB) easily detaches for fast airway access in an emergency. ZeroNoise® electronics, high-power speakers, and noise-cancelling mic integrated in HCB. Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance. Factory installed HANS anchors. Adjustable integrated anti-scratch sunscreens: ML Red Mirror (M10S-Short) installed,  Dark Smoke (M10-Long) supplied in the box. Removable cheek pads with multi-density advanced materials for optimal comfort. Ultra-reliable, heavy duty in-molded female Nexus connector. Adjustable carbon fiber sun peak. Air extraction holes maximize cooling. Bell HP10 Rally Helmet Options Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (each by special order). Adjustable sunscreens available in various colors and two lengths to ensure optimal visual comfort. Sizes (in cm): 54, 55, 56, 57, 58, 59, 60, 61, and 61+.

Bell Helmets HP6 8860-2018 Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11400 Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 8860-2018 Features & Options: Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 8860-2018 Carbon Fiber Helmet: Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell Helmets HP6 8860-2018 RD-4C Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 RD-4C 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11410X Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Integrated Hydration and Electronics for ear buds (ear buds not included) Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 RD-4C 8860-2018 Features & Options Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 RD-4C 8860-2018 Carbon Fiber Helmet Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell Helmets HP6 8860-2018 RD-4C/EC Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 RD-4C/EC 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11410X Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Integrated Hydration and Electronic Ear Cup Speakers Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 RD-4C/EC 8860-2018 Features & Options: Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 RD-4C/EC 8860-2018 Carbon Fiber Helmet: Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell HP7 EVO III Carbon Fiber FIA 8860-2018 Helmet The Bell Racing Helmet Designed to FIA Super Helmet Standards Developed through close collaboration with leading F1 drivers and teams, the carbon fiber Bell HP7 EVO III is aerodynamically sleek, lightweight and efficient, designed to excel under the intense demands of open-wheel and open-cockpit racing. The updated Bell HP7 EVO-III meets the FIA's FIA8860-2018 "super helmet" standard, the most advanced sport helmet standard in the world. Designed for professional drivers competing at the highest levels of motorsports, the Bell HP7 EVO III Carbon Fiber helmet allows racers to take advantage of technological innovations like aerospace composite materials and advanced energy absorbing liner systems. Bell HP7 Carbon Fiber FIA 8860-2018 Helmet Details: Manufacturer: Bell Helmets Model number: 11010xx Construction: High-strength and high-modulus carbon fiber ultra-light shell Color: Carbon, Matte Finish Homologation: FIA 8860-2018 Sizes: 54cm to 61+cm Interior: Advanced multi-density, multi-piece liner Visor: Optical-grade SE07 Double Screen Anti-Fog (DSAF) Ventilation: Top and chin bar ventilation system with 12 intake and extraction channels Bell HP7 EVO III Carbon Fiber Additional Features: Shell and shield optimized for aerodynamic performance, low internal noise, and impact energy management Integrated channels to install drink tube and radio systems Available with or without duckbill (chin spoiler) Top spoiler, top and chin bar gurneys available separately Factory installed HANS anchors included Add a Competition Motorsport Performance Racing Helmet Bag to keep your new Bell HP7 Carbon Fiber helmet safe and secure throughout each a race weekend. Bell HP7 Carbon Fiber FIA 8860-2018 Helmet Interior Colors Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order, additional charges will apply). Grey interior is standard. This helmet will ship with signature required for delivery.

Bell HP77 2024 Alex Albon 1:2 Mini Helmet Due to high demand, shipping times may vary Bell has teamed up with Formula 1 driver Alex Albon to create this 1:2 scale replica special edition Mini Helmet featuring Alex Albon's helmet livery for the 2024 Formula 1 season. This meticulously-crafted replica, at a scale of 1:2, faithfully captures the essence of his original helmet. Alex worked closely with Bell's paint team to ensure the graphics and signature elements are closely matched to his own F1 helmet. Show your support for Alex Albon with this new replica helmet from Bell! Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.

Bell HP77 2024 Esteban Ocon 1:2 Mini Helmet Due to high demand, shipping times may vary Bell has teamed up with Formula 1 driver Esteban Ocon to create this 1:2 scale replica special edition Mini Helmet featuring Esteban Ocon's helmet livery with BWT Alpine Racing for the 2024 F1 season. This meticulously-crafted replica, at a scale of 1:2, faithfully captures the essence of his original helmet. Esteban worked closely with Bell's paint team to ensure the graphics and signature elements are closely matched to his own F1 helmet. Show your support for Esteban Ocon with this new replica helmet from Bell! Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.

Bell HP77 2024 Fernando Alonso 1:2 Mini Helmet IN-STOCK! Bell has teamed up with Formula 1 World Champion Fernando to create this 1:2 scale replica special edition Mini Helmet featuring Fernando Alonso's helmet graphics from the Aston Martin 2024 Season. This meticulously-crafted replica, at a scale of 1:2, faithfully captures the essence of the original helmet. Fernando worked closely with Bell's paint team to ensure the graphics and signature elements are closely matched to his own F1 helmet. Show your support for Fernando Alonso with the new replica helmet from Bell! Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.

Bell HP77 2024 Guanyu Zhou 1:2 Mini Helmet This is a pre-order item should ship Q4 2024 Bell has teamed up with Formula 1 driver Guanyu Zhou to create this 1:2 scale replica special edition Mini Helmet featuring Guanyu Zhou's amazing helmet graphics for the 2024 F1 season. This meticulously-crafted replica, at a scale of 1:2, faithfully captures the essence of Zhou's original helmet. Guanyu worked closely with Bell's paint team to ensure the graphics and signature elements are closely matched to his own F1 helmet. Show your support for Guanyu Zhou with this new replica helmet from Bell! Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.

Bell HP77 2024 Kevin Magnussen 1:2 Mini Helmet This is a pre-order item should ship Q4 2024 Bell teamed up with Formula 1 driver Kevin Magnussen to create this 1:2 scale replica special edition Mini Helmet featuring Kevin Magnussen and Haas livery for the 2024 Formula 1 season. This meticulously-crafted replica, at a scale of 1:2, faithfully captures the essence of Kevin's original helmet. In fact, Magnussen worked closely with Bell's paint team to ensure the graphics and signature elements are closely matched to his own F1 helmet. Show your support for Kevin Magnussen and Haas with this new replica helmet from Bell! Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.

Bell HP77 2024 Lando Norris 1:2 Mini Helmet Last Run of these before they are retired....get one while you can. Bell teamed up with Formula 1 hero Lando Norris to create this 1:2 scale replica special edition Mini Helmet featuring the iconic Lando Norris and McLaren livery for the 2024 F1 season. Lando Norris is leading the reborn McLaren team that seek to return where they belong: at the front of the grid. This meticulously-crafted replica, at a scale of 1:2, faithfully captures the essence of Norris' original helmet. Lando worked closely with Bell's paint team to ensure the graphics and signature elements closely match his own F1 helmet. Show your support for Lando Norris with this new replica helmet from Bell! Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.

Bell HP77 8860-2018 Carbon Fiber Helmet Bell Helmets Championship Pedigree Auto Racing Helmet Based on Bell’s highly successful F1 World Champion proven HP7 design, the Bell HP77 8860-2018 provides the latest impact protection by lowering the visor opening 12 mm and reinforcing the front of the helmet with advanced ballistic protection (ABP). The HP77 is the most advanced FIA8860-2018 helmet in Bell’s line-up, setting a new standard for lightweight, aerodynamically superior carbon fiber helmet performance to meet the intense demands of open-wheel and open-cockpit racing. The Bell HP77 carbon fiber helmet is homologated to the FIA 8860-2018 ABP standard, the most rigorous sport helmet standard on the planet. The Bell HP77 carbon fiber helmet was designed for professional formula racers competing at the highest levels of the sport and for any other racing driver who considers safety of paramount importance. Bell HP77 8860-2018 Carbon Fiber Helmet Details: Homologation: FIA8860-2018 ABP Visor opening lowered 12 mm adding ballistic protection from medium-size debris High-strength and high-modulus carbon fiber shell Advanced multi-density, multi-piece liner for energy absorption and impact performance Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor Top and chin bar ventilation system with 12 intake and exhaust channels Shell and shield design optimized for aerodynamic performance Integrated channels for drink tube and radio systems Top spoiler, top and chin bar gurneys available separately Factory-installed HANS anchors HP helmet bag included Color: Matte Carbon Fiber Finish Sizes: 54cm to 59+ Compatible Shields: SE077 Shield Pivot Kit: SV (SE07, SE077) Bell HP77 Interior Fabric Color Options: Custom interior fabric is available in Black, White, Red, Tan, Purple, Blue, Green or Neon Yellow. These are special order, additional charges will apply. Grey interior fabric is standard.

Bell HP77 2024 Charles Leclerc 1:2 Mini Helmet Last Run of these before they are retired....get one while you can. Bell has teamed up with Formula 1 driver Charles Leclerc to create this 1:2 scale replica helmet in red and white Ferrari colors. Charles worked closely with Bell's paint team to ensure the graphics and signature elements are closely matched to his own F1 helmet. Show your support for Forza Ferrari with this new replica helmet from Bell! Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.