Seat Accessories

CMS Performance Harness Install Kit For C8 Corvette This Product Fits The Following Cars: Chevrolet Corvette Stingray & Z51, C8 (2020+) Chevrolet Corvette Z06, C8 (2023+) Quick and Easy Installation of Harness Lap Belts in the C8 Corvette The CMS Performance Harness Install Kit for the C8 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C8 Corvette. The kit is typically used along with the CMS Performance C8 Harness Bar or Deluxe C8 Harness Bar. Together they give C8 Corvette driving enthusiasts an elegant, secure way to use a racing harness. Each CMS Performance C8 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C8 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C8 Corvette, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C8 Corvette that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness. CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C8 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, built, and powder coated in the USA This product is intended for off-road use only.

Racetech RT1005M Aluminum Side Mounts Light Weight and Strong Racing Seat Side Brackets Racetech milled aluminum alloy bracket set for side-mounting seats to your car floor or chassis. CNC machined from from strong, lightweight 5mm thick 5083 aluminum alloy. Sold as a pair. Racetech RT1005M Brackets Fit the Following Seats: RT1000 RT4000W (discontinued) RT4000WX (discontinued) RT Saker (with modification) RT Road RT RoadW (discontinued) RT4000WLB RT4000WXLB RT1000LBHG Racetech RT1005M Specs and Details: Weight: 2.52 lbs (1.14 kg) per pair Materials: 5mm 5083 aluminum alloy Seat hole spacing: nominal 260mm; min 252mm; max 264mm

Adjustable Sub Strap Mounting Bar R-9258/R-9259 The Brey Krause R-9258 and R-9259 Sub Strap Mounts are designed to mount directly to any Brey Krause variable-width side mounts and mounting adapters, including those designed to be used with seat sliders. The stainless steel bar is threaded on both ends to allow for length adjustment depending on seat width while keeping the sub-strap guide centered.. For seats up to 426mm wide, use R-9259. For seats over 426mm wide, use the R-9258. This sub-strap mount can be used with either driver- or passenger-side mounts. Brey Krause R-9258/R-9259 Sub Strap Mount Details Manufacturer: Brey Krause Manufacturer part no.: R-9258 or R-9259 Material: T304 stainless steel Finish: brushed stainless steel Weight: 2.0 lbs. Seat side mounts, sliders, and harness each sold separately

Racetech RTB2115B Seat Back Bracket The Racetech RTB2115B bracket for back-mounting seats is made from 5mm 5083 aluminum alloy. This bracket bolts to the rear shoulder section of Racetech 119-Series racing seats and works in conjunction with Racetech RTB2005C clamps. This allows you to brace your racing seat to a lateral or diagonal roll cage or roll bar tube. Four holes must be drilled into the RTB2115B bracket to accept the Racetech clamps once you have your racing seat set-up in the optimum driving position. For more info, take a look at these racing seat back-mounting instructions. Racetech RTB2115B Is Compatible With These Racetech Seats: RT4119HRW RT4119THR RT4119WHR RT4119WTHR RT9119HR RT9119THR RT9119WHR RT9119WTHR

Sub Strap Mounting Bar for 2016+ Gen 6 Camaro The Brey Krause R-9172 Sub Strap Mount is designed to mount directly to Brey Krause seat track adapter R-9170 or R-9171.  This sub strap mount can be used with either driver- or passenger-side mounts.   Brey Krause R-9172 Gen 6 Camaro Sub Strap Mount Details: Material: T304 stainless steel Finish: brushed stainless steel Weight: 2 lbs. (0.9 kg) Side mounts, sliders, and harness not included

Schroth Bolt Kit For Porsche GT3 And GT4 For use with the following harnesses: Schroth Porsche GT3/GT4 ASM Harness (4 Point) Schroth Enduro 2x2 Porsche GT3 6 Point Racing Harness Schroth Flexi 2x2 Porsche GT3-GT4 6 Point Racing Harness Looking to install Schroth GT3/GT4 harnesses in your Porsche equipped with factory Lightweight Carbon Bucket seats and three-point seat belts? This bolt kit will attach your Schroth harness to your Lightweight Carbon Buckets while allowing proper rotation for ideal lap belt positioning. Schroth Porsche Bolt Kit Includes: (2) S-82 washers (2) S-104 sleeves (2) S-184 washers (2) SG-29 bolts

Competition Motorsport Racing Seat Mounting Hardware Kit Complete Mounting Kit Includes: Four (4) 8x1.25 25mm Bolts Four (4) 8x1.25 20mm Bolts Four (4) 8x1.25 Locking Nuts Eight (8) Washers (Sparco Part Numbers 50001 and 50002, everything you need in one place.)