PFC Motorsport Brakes

0278.11.17.44 (11 Compound) A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation.  0278.08.17.44 (08 Compound) One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range.  

PFC Brake Pads 0635.97.13.44 (97 Compound) A favorite since its debut, Performance Friction 97-Compound Racing Braking Pads continue to impress, winning numerous races in CART, ALMS, Grand Am, ASA, and Club Races everywhere. The 97-Compound has less initial bite and torque then the 01, while offering great modulation, a very flat torque curve, and excellent release characteristics. A naturally low-wearing pad, the 97 compound is popular in the endurance circuits and amongst Club Racers and Track-Day enthusiasts. PFC Brake Pads 0635.08.13.44 (08 Compound) One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. PFC Brake Pads 0635.11.13.44 (11 Compound) Based on the out-going 01-compound, Performance Friction's 11-compound takes the same great high-bite and torque but with even better rotor and pad wear characteristics and improved bite, modulation, and release. Exhibiting a very high initial bite and torque, very little temperature induced torque rise follows. Less torque scatter exists for improved modulation with excellent release, helping to eliminate wheel lock at the end of a stop. Fits Mazda Miata (94-05), Front

Performance Friction PFC Brake Pads 7968.XX.28.44 The mission of PFC Brakes is to provide the correct CarbonMetallic® pad compound for each application and venue. Instead of an all makes, all models approach, PFC formulates the correct compound with behavior to suit the venue it is designed for. This is the reason in many applications; there maybe only one or two pad options.  With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”.  This means very easy burnishing to bed pads and discs. PFC 331 Compound 331 is the next generation of PFC endurance material. Improved control with ABS, and gentle on discs.  The 331 Carbon Metallic ® compound has been developed with higher initial bite than PFC’s renowned 08 endurance compound.  The 331 has improved release, and continues to offer exceptional control and feel. It boasts low wear rate and exceptional disc conditioning. PFC 82 Compound 82 Compound: New Front Endurance Compound 82 Compound is the new standard for PFC endurance compounds. It has gained an immediate following upon release in the endurance sportscar world after its debut win in the 2023 24hrs of Nürburgring. The 82 is a degressive pad specifically designed to work together with ABS to give superior control and a smooth release, minimizing lockups. The 82 compound has an extremely low wear rate while simultaneously being extra gentle on discs, making this compound the ultimate endurance option. Long distances aren’t this pad’s only strong suit though! With a very high initial bite, this pad can also be used for medium distance sprint applications, where ABS compatibility and a low wear rate are requested. The 82 compound was developed by working closely with experienced teams and drivers to ultimately tailor this pad to have the perfect combination of durability and speed!  PFC 15 Compound The new generation 15 compound is becoming very popular due to its excellent braking characteristics. Very good in all conditions and excellent when running at high temperatures. Its easy control and release are appreciated by engineers and drivers. Gentle on discs and low wear rate are other excellent virtues. 15 is a great compound winner in different GT3/GT4 races or open wheel categories such as US F3, F3 and Indy Lights. It has better cold bite than 11 or 13. The 15 is one of the most complete PFC compounds. 15 works very well with modern racing ABS. PFC 11 Compound A new-generation sprint and medium distance friction material, giving you the ultimate in control with superior disc conditioning. Developed from PFC 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. 991.1 GT3 (13-17) GT3 Cup, 3.8L, 338kW (13-) 991.2 TT/GT2 RS (16-) GT2 RS 3.8L, 515KW (17-) GT2 RS Clubsport 3.8L, 515KW (19-) 991.2 GT3 (18-) GT3 Cup, 4.0L, 357KW 992.1 (19-) C2S, 3.0L, 331KW (19-) C4S, 3.0L, 331KW (19-) Cayman 981 (14-16) GT4 3.8, 283 kW (15-16) GT4 CS 3.8, 283 kW (16-16) Cayman 718 (17-) GT4 4.0, 309 KW (19-) GT4 CS, 3.8L, 313KW (21-) GT4 RS, 4.0L, 368KW (21-)

PFC 11 COMPOUND A new generation sprint and medium-distance friction compound, giving you the ultimate in control with superior disc conditioning. Developed from the PFC 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth, developed to reduce wheel locking at the end of a stop while giving more cold and hot bite than the endurance oriented PFC 08 compound.¬†¬†PFC 08 COMPOUND One of PFC's most popular compounds which came to fame in Endurance Sports Car and GT racing due to its performance in applications where smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, PFC 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of competitors' materials but with much higher bite and consistent performance across a broad temperature range. PFC 332 COMPOUND 332 has been formulated with lower bite and torque for rear applications.With smooth release, the 332 offers excellent stability and control.The 332 has been designed to work with ABS applications, and has exceptionally low wear rates.   FITMENT (Iron Rotors Only) 997 & 997.2 GT3/GT3RS 997 & 997.2 Turbo 996 GT3¬†  

Performance Friction PFC 0278.XX.17.44 E30 Front - 08 and 11 Compound The PFC 0278 brake pad fits the BMW Spec E30 front axle and is available in both the 08 and 11 compounds. The 08  (endurance) compound is most popular in endurance applications such as ChampCar in an 8 hour race. The 11 (sprint) compund has dominated the NASA Spec E30 podiums since it's inception.   Performance Friction PFC 0278.XX.17.44 E30 Front Details: Manufacturer: Performance Friction (PFC) Manufacturer part number 08 Compound: 0278.08.17.44 Manufacturer part number 11 compound: 0278.11.17.44 Fits BMW E-30 Front: Yes Fits BMW E-30 M3 Front: No Thickness of backing plate and pad material: 17mm 0278.08.17.44 (08 Compound) One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range 0278.11.17.44 (11 Compound) A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation.

7740.08.16.44 (08 Compound) One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. COMMON CALIPER FITMENT: Radical SR1

Performance Friction PFC Brake Pads 7745.XX.16.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the Sports Car market, we know It’s Quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge  Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs.  PFC 01 COMPOUND The Performance Friction PFC 01 compound is the standard by which all other racing brake pads are judged. The PFC 01 has a very high initial bite and torque, with very little temperature-induced torque rise. At the end of braking, less torque scatter exists for improved modulation and excellent release. With its low-wear characteristics and excellent disc conditioning properties, it's no wonder the PFC 01 compound has won more World and National Championships than any other brake pad on the market! PFC 11 Compound A new-generation sprint and medium distance friction material, giving you the ultimate in control with superior disc conditioning. Developed from PFC 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 13 Compound The new generation of ultimate high bite-high friction. Performance Friction's 13 compound has been developed with increased bite, modulation, with superior disc conditioning and release characteristics for exceptional control. Ultra-smooth and great for tracks with high grip or high downforce cars. It is the ultimate combination of high bite and infinite control. Ideal use where high bite in the first third of the stop is desired. 13’s wear is on a par with PFC’s legendary 01 compound and will operate at higher temperatures if called to. 13 has a very high threshold for fade resistance. Out of all the high bite, high torque pads on the market 13 has shown to have one of the lowest taper wear in a properly designed race caliper.   COMMON CALIPER FITMENTS: Manufacturer: Model: Alcon H-Type AP Racing CP4567 CP5040-10/11/12/13S4 CP5100 CP5108 CP6760  

PFC Brake Pads 7969.XX.26.44 (26mm) PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the Sports Car market, we know It’s Quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge  Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs.  PFC 332 Compound 332 has been formulated with lower bite and torque for rear applications.  With smooth release, the 332 offers excellent stability and control.  The 332 has been designed to work with ABS applications, and has exceptionally low wear rates. PFC 11 Compound A new generation sprint and medium distance friction material‚the ultimate in control with superior disc conditioning. Developed from PFC 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation.   991.1 GT3 (13-17) GT3 Cup, 3.8L, 338kW (13-) 991.2 TT/GT2 RS (16-) GT2 RS 3.8L, 515KW (17-) GT2 RS Clubsport 3.8L, 515KW (19-) 991.2 GT3 (18-) GT3 Cup, 4.0L, 357KW 992.1 (19-) C2S, 3.0L, 331KW (19-) C4S, 3.0L, 331KW (19-) Cayman 981 (14-16) GT4 3.8, 283 kW (15-16) GT4 CS 3.8, 283 kW (16-16) Cayman 718 (17-) GT4 4.0, 309 KW (19-) GT4 CS, 3.8L, 313KW (21-) GT4 RS, 4.0L, 368KW (21-)

PFC 11 COMPOUND A new generation sprint and medium distance friction material, giving you the ultimate in control with superior disc conditioning. Developed from PFC 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of a stop while giving more cold and hot bite than the endurance oriented PFC 08 compound. Brake with confidence, with the ultimate control and modulation. PFC 331 COMPOUND 331 is the next generation of PFC endurance material. Improved control with ABS, and gentle on discs. The 331 Carbon Metallic ® compound has been developed with higher initial bite than PFC’s renowned 08 endurance compound. The 331 has improved release, and continues to offer exceptional control and feel. It boasts low wear rate and exceptional disc conditioning.

PFC Porsche 991 GT3 Cup / GT4 Clubsport Rear Slotted Replacement Disc 380mm diameter and thickness is 30mmThe radial depth is 47mmBrake disc only, does not include brake bell Slotted V2/V3 disc 991 GT3 Cup Car and GT4 Clubsport Porsche 991 GT3 Cup (sprint). Not for use in official Porsche Carrera Cup championships.Porsche Cayman GT4 Clubsport (FIA GT4 homologated) GT4CS Part numbers replace: 380.30.0047.451 380.30.0047.461

Performance Friction PFC Brake Pads 0558.xx.18.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the Sports Car market, we know It’s Quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge  Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs.  PFC 08 COMPOUND One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. PFC 11 COMPOUND A new-generation sprint and medium distance friction material, giving you the ultimate in control with superior disc conditioning. Developed from PFC 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. FITMENT: BMW 318i incl. Ti; Race Ready 1993 - 1999 Front BMW 318is incl. Ti; Race Ready 1993 - 1999 Front BMW 318ti incl. Ti; Race Ready 1995 - 1999 Front BMW 323Ci Race Ready 2000 Front BMW 323i Race Ready 1999 - 2001 Front BMW 323is Race Ready 1999 Front BMW 323ti Race Ready 1999 - 2000 Front BMW 325 Race Ready 1998 - 2000 Front BMW 325Ci Race Ready 2001 - 2003 Front BMW 325i Race Ready 1992 - 2003 Front BMW 325is Race Ready 1992 - 1995 Front BMW 325xi Race Ready 2001 - 2003 Front BMW 328Ci Race Ready 2000 Front BMW 328i Race Ready 1996 - 2000 Front BMW 328is Race Ready 1996 - 1999 Front BMW 525i Sedan only; Race Ready 1994 Front BMW Z3 1.9i; 2.8i; Coupe; Roadster; Race Ready 1999 Front BMW Z3 1.9i; 2.8i; Roadster; Race Ready 1998 Front BMW Z3 2.0i; 2.8i; Coupe; Roadster; Race Ready 2000 Front BMW Z3 2.2i; 3.0i; Coupe; Roadster; Race Ready 2001 - 2002 Front BMW Z3 Base; Roadster; 2.8i; Race Ready 1997 Front BMW Z3 Base; Roadster; Race Ready 1996 Front BMW Z4 Race Ready 2003 - 2005 Front BMW Z5 Roadster 3.0i; Race Ready 2007 Front

PFC 01 COMPOUND The Performance Friction PFC 01 compound is the standard by which all racing brake pads are judged. The PFC 01 has a very high initial bite and torque, with very little temperature-induced torque rise. At the end of braking, less torque scatter exists for improved modulation and excellent release. With its low-wear characteristics and excellent disc conditioning properties, it's no wonder the PFC 01 compound has won more World and National Championships than any other brake pad on the market! COMMON CALIPER FITMENTS: Manufacturer: Model: AP Racing CP2279   CP3620   CP3720   CP3788, CP3789   CP4890   CP5000   CP5835   CP5880 AP Racing (Essex) SC250   SC430

Performance Friction PFC Brake Pads 0548.XX.16.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the Sports Car market, we know It’s Quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge  Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs.  The PFC 0548.11.16.44 and PFC 0548.08.18.44 have dominated the NASA Spec E46 class since inception. The PFC 0548 pad shape fits the rear axle of the E46 (non-M) chassis and comes in three popular compounds, the 08, 11 and brand new 332. PFC 332 Compound 332 has been formulated with lower bite and torque for rear applications. With smooth release, the 332 offers excellent stability and control. The 332 has been designed to work with ABS applications, and has exceptionally low wear rates. PFC 11 Compound A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation.   PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. FITS:  BMW 7 Series 1994-01 E38 BMW 8 Series 1994- E31 BMW 330Cd / 330Ci 2003- E46 BMW 330d / 330Xd 2000-06 E46 BMW 330i 2000-06 E46 E46-330i BMW M3 2000-06 E46 E46-M3 BMW M3 CSL 2000-06 E46 CSL BMW M5 1998-03 E39 BMW X3 2004- E83 BMW X5 2000- E53 BMW Z4M 2006- E85 M Roadster & Coupé BMW Z8 2000-  

PFC 08 COMPOUND One of PFC's most popular compounds which came to fame in Endurance Sports Car and GT racing due to its performance in applications where smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, PFC 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of competitors' materials but with much higher bite and more consistent performance across a broad temperature range. FITMENT (Iron Rotors Only): Porsche 997.1 & 997.2 GT3/GT3RS Porsche 997 Turbo Porsche 996 GT3        

PFC Brake Pads 0636.97.13.44 (97 Compound) A favorite since its debut, Performance Friction 97-Compound Racing Braking Pads continue to impress, winning numerous races in CART, ALMS, Grand Am, ASA, and Club Races everywhere. The 97-Compound has less initial bite and torque then the 01, while offering great modulation, a very flat torque curve, and excellent release characteristics. A naturally low-wearing pad, the 97 compound is popular in the endurance circuits and amongst Club Racers and Track-Day enthusiasts. PFC Brake Pads 0636.11.13.44 (11 Compound) Based on the outgoing 01-compound, Performance Friction's 11-compound takes the same great high-bite and torque but with even better rotor and pad wear characteristics and improved bite, modulation, and release. Exhibiting a very high initial bite and torque, very little temperature induced torque rise follows. Less torque scatter exists for improved modulation with excellent release, helping to eliminate wheel lock at the end of a stop. Fits Mazda Miata (94-05), Front