Club Benefits

Stilo ST6 GT Composite SA2025 Racing Helmet The legendary Stilo composite—lighter, cooler, clearer For over 25 years, Stilo has led racing-helmet innovation and the ST6 line marks a bold new chapter. With input from top programs, engineers refined front and top aerodynamics for stability at speed. The ST6 GT Composite emphasizes airflow, visibility, and long-stint comfort while meeting modern safety targets. From track-tested aero to a dual-lock visor system, every update is about confidence in the car. The ST6 improves on the market-leading ST5 in key areas: ~10% lighter than Stilo ST5 ~26% more airflow than Stilo ST5 ~11% wider downward visibility Refined liner and cheek pads More shell sizes to optimize weight Reworked visor construction for durability and easy care Updated visor hardware for smoother actuation Stilo ST6 GT Composite Auto Racing Helmet Features Puro Tech: Stilo's composite process minimizes extra coatings to reduce mass without compromising protection. Added shell size: now offered in three shell sizes, the ST6 GT helps deliver the smallest, lightest shell appropriate for your head size. Increased airflow design: redesigned front intake and top vents route air through EPS channels to reduce sweat and moisture. Increased downward visibility: a wider field of view speeds up belt fastening and improves situational awareness. Interior comfort: revised cheek padding stabilizes fit and comfort at speed. Injection molded visor: clear optics with a washable high-performance anti-fog treatment. Dual visor lock: compliant with FIA standards in both closed and vent positions. Updated visor hardware: smoother actuation and easier installation; available in anodized finishes. Stilo Helmets ST6 GT Composite Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0800AF2X Homologation: FIA 8858-2015 Certification: Snell SA2025 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs Stilo ST6 Size & Measurement Customers who typically wear a size 59 in other brands are often most comfortable in a Stilo size 61 (large shell). If you’re between sizes, many drivers prefer the tighter option for stability. What’s Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020—not a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo ST6 GT Composite SA2025 Helmet FAQs Is this Snell SA2025 certified? Yes, this listing reflects SA2025 certification for U.S. auto racing. What’s the difference between GT and FN? GT includes earmuffs for noise reduction and comms; FN is open-ear for maximum awareness and airflow. Can I reuse ST5 shields? No, the ST6 uses its own shield family; choose ST6-specific shields and hardware. Ships with signature required.

Alpinestars Tech-1 ZX v4 FIA/SFI Nomex Gloves Rev up your racing experience with the Alpinestars Tech-1 ZX v4 Nomex auto racing gloves - the latest top-of-the-line glove from the leaders in high-performance racing gear. These gloves are more than just, well, gloves; they're your ticket to improved safety, unrivaled grip and performance, and a dash of style that'll make you feel like a racing legend. What's New? Alpinestars is always on the quest for perfection when it comes to driver safety and performance. With the Tech-1 ZX v4, they've turned down the heat, quite literally! These gloves boast a jaw-dropping 20% improvement in heat transmission without compromising on the fit, feel, and grip that Alpinestars is famous for. Designed For The Pros (And Perfect for You) Developed hand-in-hand with Formula 1 and Endurance racing's finest, the Tech-1 ZX v4 Gloves provide top-notch protection and temperature control. Thanks to their dual-sided honeycomb fabric construction, breathability is off the charts. No more sweaty palms during those high-speed laps! Grip That Won't Let Go The 3D silicone print palm delivers grip like never before, and the pre-curved shape means less material bunching when you're gripping the wheel for dear life. External seams? Yes, please! They keep those pressure points at bay, ensuring superior comfort throughout your race. Feel The Control Outer grip zones on these gloves give you unparalleled control over the cockpit's commands. Plus, the ergonomically designed 3D grip technology with strategically placed silicone surface patterning boosts flexibility and control, making every maneuver a breeze. Stay Connected In this digital age, staying connected is crucial. These gloves are touchscreen compatible, so you can stay in touch with your pit crew without removing them. Safety First Certified to meet updated FIA 8856-2018 and SFI 3.3 homologation standards, these gloves are not just stylish but incredibly safe. Alpinestars Tech 1-ZX V4 Glove Size Chart Alpinestars Tech 1-ZX V4 Glove FAQs What makes a good racing glove? A good racing glove should offer a snug fit, superior grip, breathability, and meet safety standards. The Tech-1 ZX v4 ticks all these boxes and then some! How do I choose a racing glove? Consider factors like fit, grip, breathability, and safety certifications. The Tech-1 ZX v4 excels in all these aspects. Do racing gloves make a difference? Absolutely! They provide better grip, reduce fatigue, and enhance safety. The Tech-1 ZX v4 takes it up a notch with its advanced features. What are racing gloves used for? Racing gloves are essential for providing a secure grip on the steering wheel, enhancing control over the vehicle, and protecting your hands in case of accidents. How do I wash my racing gloves? Follow the manufacturer's care instructions for washing your racing gloves. Typically, it's recommended to hand wash them in mild detergent and let them air dry. Ready to Take the Checkered Flag? Elevate your racing game with the Alpinestars Tech-1 ZX v4 Nomex Gloves. It's not just a purchase; it's a commitment to safety, performance, and style. So what are you waiting for? Grab your pair today and make every lap count. Victory is just a glove away!

HJC HJ-28 Replacement Shields These HJC replacement helmet shields give you a choice of several popular and useful colors and tints. Dark tints are perfect for bright, sunny days at the race track while the amber shield gives you better contrast perception when it's cloudy. The Black Chrome, Dark Blue, and Fire Red mirror shields are made using RST, a specialized coating process in a high-vacuum chamber with metallic compounds, giving them a one-of-a-kind rainbow appearance. These shields fit HJC models: AR-10 III, HX-10 III, H10 Composite, H10 Carbon, and H70. HJC HJ-28 Replacement Helmet Shield Features Polycarbonate injection molded construction for superior visibility and durability Hard coated anti-fog interior (Amber, Clear, and Dark Smoke only) Pre-installed tear off posts Available in Dark Blue, Black Chrome, Amber, Dark Smoke, Fire Red, and Clear

CMS Master "OFF" Decal Our CMS Master "OFF" Decal meets the standards of NASA, SCCA and IMSA for the "international marking of a spark in a blue triangle" to mark your vehicle's kill switch location. 3.375" by 2" wide Die-cut vinyl decal

Dull Finish Racers Tape 2in by 83ft (Gaffers Tape) The preferred choice of the pros. Dull Finish Gaffers tape is a vinyl-coated cloth, rather than a poly coated. Anybody who has ever used Gaffers tape, in place of duct tape, never looks back. This tape has a high quality adhesive that does not leave a sticky residue when removed. It comes in six brilliant colors and has many racing uses, including pit marking, emergency body and fender repair and waterproofing. The uses are endless. Available in eight colors; Black White Red Blue Electric Blue Yellow Neon Pink Neon Green    

CMS Performance RF1 DOT4 Racing Brake Fluid Real Life 622º Boiling Point Without the Real High Price RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 622º F / 328º C, RF1 exceeds all DOT 3 & DOT 4 requirements and is compatible with all DOT 3, DOT 4, and DOT 5.1 fluids. Note: RF1, like all DOT 4 brake fluids, is not compatible with DOT 5 silicone-based or any mineral-based brake fluids. On the race track, there is perhaps no single safety system more important than your brakes. No single part of that system is more critical than brake fluid, given the extraordinarily high temperatures it operates under. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot. We found more than a few brands whose product was all hype and not high performance. No Hype. All Performance. No Kidding. So we did something about it. CMS Performance RF1 is manufactured in partnership with Orthene, maker of the also-excellent Halo P1 racing brake fluid and a brake fluid supplier to many racing teams in Formula 1, WEC, and other professional series. RF1 was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days. The bottom line is this: you can spend a lot more on brake fluid, but it's hard to find higher-performance than RF1 Racing Brake Fluid. CMS Performance RF1 Racing Brake Fluid Details: Manufacturer: CMS Performance Manufacturer part no.: CMSRF1 Typical dry boiling point: 622º F / 328º C Typical wet boiling point: 399º F / 204º C Exceeds DOT 3 & DOT 4 standards Bottle size: 500 ml (16.9 fl. oz.) Click Here for Product MSDS Sheet A Word About Flushing Brake Fluid All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point. To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!

Arai Auto Racing GP-5W SA2020 Helmet The Arai Auto Racing GP-5W SA2020 Helmet is perfect for stock car, sedan, and rally drivers. The GP-5W Helmet is a favorite because of its wider, 90mm (approx 3.5” top to bottom) eye port opening. The GP-5W uses its own exclusive shield with this larger opening. The Arai GP-5W is Snell SA2020 certified with M6 washer/nuts installed at the factory. Drivers of any experience level will be able to easily install their Head and Neck Restraint system anchor posts (sold separately). The Arai Auto Racing GP-5W SA2020 also comes with the FIA 8859-2015 certification sticker found on the shell’s interior lining. Arai GP-5W Innovative SCLC Construction The Arai GP-5W Helmet SA2020 is built with Arai's exclusive, very-lightweight SCLC (Super Complex Laminate Construction) shell technology. This ensures a low overall weight to balance the added weight of the helmet’s larger shield. Arai GP-5W Helmet Shell Shape he Arai Auto Racing GP-5W Helmet SA2020 helps reduce fatigue for the driver due to its more natural head shape, smaller shell size, and lower center of gravity to assist with balance and stability. Interior Fit of the Arai GP-5W The Arai Auto Racing GP-5W Helmet SA2020 is designed to closely match the shape of the human head, allowing for a snug, yet comfortable, fit. Arai has developed this “natural” shape over more than 50 years of helmet design research and refinement. Wide-View Eye Port Sedan drivers will appreciate the larger, 90mm eye port, top to bottom. A visor peak is available for drivers not needing a shield on the The Arai Auto Racing GP-5W Helmet SA2020. Removable/Replaceable Cheek Pads Low maintenance, easy-to-clean cheek pads are removable, washable, and replaceable with pads of varying thickness to provide a snug, safe fit. M6 HANS Anchor Threads The FIA 8859-2015 certified GP-5W helmet has M6 threaded washer/nuts with 6mm threads pre-installed. This convenient feature lets the driver use the anchor system that works best with their Head and Neck Restraint. The anchor posts are made to rest flush on the helmet surface, accepting a variety of HNR anchor systems. Arai GP-5W Extraordinary Ventilation Closed-cockpit drivers need greater airflow when racing. The upper ventilation system of the GP-5W SA2020 helmet incorporates two exhaust vents and two large intake ducts to help keep the driver cool and comfortable. Available Visors for the Arai GP-5W Available shields for the Arai GP-5W are available here. Arai anti-fog shields are available in clear, light tint and dark smoke. Standard shields also come in clear, light tint and dark smoke. Don't forget to check out the Competition Motorsport Performance Racing Helmet Bag to keep your new Arai GP-5W safe and secure throughout each race weekend. The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship to you with signature required for delivery.

OMP 36-Hole Racing Seat Brackets New OMP racing seat brackets feature a 36-hole design to accommodate an incredibly wide range of seat mounting configurations. Made from steel or OMP's high-strength 6mm aluminum construction, they comply with FIA Appendix J article 253, approved for competition use. They are designed to work seamlessly with OMP Racing Seats, and will fit many other seats with 11.4 in. (289 mm) side-mounting hole spacing (including many Sparco seats). The multi-hole design allows for up to 36 different seat mounting positions. Aluminum mounts are black anodized for excellent durability.

CMS Performance Bolt-In Roll Bar For Chevy Camaro (Gen 6) This Roll Bar Fits The Following Cars: 2016-2024 Chevy Camaro (all except convertible) The Strongest Roll Bar Available For Your Gen 6 Camaro The CMS Performance Camaro Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market. In designing the Camaro roll bar, safety, strength, and structural integrity were our primary goals. Fully TIG welded from Docol R8 Advanced High-Strength Steel allows us to design a roll bar that is stronger and lighter! Our innovative design maximizes the room for the factory Recaro seats, meaning taller drivers can send their seat all the way back and still maintain a comfortable recline. Precision CNC machined solid steel interlocking roll bar clamps on the kicker mounting plates help make installation a snap. Free custom powder-coating gives you a premium, finished look without breaking the budget. Add the optional custom-cut Rear Seat Delete Kit and you've got a fully trimmed-out roll bar installation that performs as great as it looks. Our Camaro roll bar forms the perfect foundation for taking your safety up a huge notch. Designed for Incredible Strength And Safety Click Here for Installation Instructions Safety is the main reason to install a roll bar in the first place. As racers ourselves, we sweat the details. That's why we use 1.75" x .095" Docol R8. Docol is 15% stronger than 4130 CrMo, and much less brittle. Docol R8 also dissipates impact energy more effectively. It's the same tubing used in full-competition road racing roll cages because, first and foremost, it's a roll bar not a trim piece. Our beefy main hoop straddles the rear seat cross member, a much stronger location than the rear footwell, eliminating the need for underbody backing plates. Taking a cue from NHRA cage design, the diagonal supports feature a concave design to allow full front-seat travel while distributing roll-over energy between the main hoop and kickers. The harness cross-bar is precisely located to put your shoulder straps at both the proper angle (0° to -20°) and distance to the driver. Finally our rear kickers bolt to a reinforced corner of the rear seat floor, again requiring no backing plates beneath the floor pan. Objects in the Rear View Mirror Are Clear A clear rear view is a big part of safety both on and off the race track. Our use of very high-strength materials and innovative design lets us keep your Camaro's rear view unobstructed by unnecessary bracing. This also helps the overall weight of the CMS Performance roll bar down. Every detail of the CMS Performance CMS Gen 6 Camaro roll bar is engineered with safety as the primary goal. An American-Made Roll Bar For An American Icon Okay, another reason to install a roll bar in a car like the Gen 6 Camaro is that they look cool. We're gear heads, we get that. Each roll bar is handcrafted right here in America by master fabricators for a perfect fit, beautifully 360o TIG welded for high strength, and fully powder-coated in our facility for a brilliant, durable finish. There's no extra charge for custom colors like the amazing, brilliant Superchrome! CMS operates a complete powder-coating facility to offer you color-matched Camaro factory colors1, giving your Camaro a personalized look that will last. None of your interior trim panels need to be eliminated or cut. Your rear seat back can be re-installed, or you can opt for our custom-made Shrader rear seat delete, the perfect place to put a track bag, helmet and HANS, driver cooling system, etc. (you can hide stuff under there, too). If you ever want to put your car back to stock, it will go back together as though the roll bar was never there. Complete, detailed instructions make installation pretty simple (figure about two hours if you're reasonably handy), and all Grade 8 hardware needed is shipped with your CMS roll bar. Add Racing Harnesses and a Head-And-Neck Restraint and and you're ready to hit the track safe and secure. CMS Performance Gen 6 Camaro Roll Bar Details Manufacturer: CMS Performance Manufacturer part no.: PRB412 Materials: 1.75″ X .095" Docol R8 Advanced High-Strength Steel Construction: Full 360o TIG welding throughout Design: One-piece main hoop/kicker design with detachable kicker feet for installation Weight: 51 lbs. (23.2 kg) Gen 6 Camaro Roll Bar Features Custom-made rear seat delete available Precision CNC-cut mounting plates Designed, built, and powder-coated in the USA American-made CNC machined steel interlocking roll bar clamps ease installation Allows full seat travel with any seat Straightforward installation and perfect fitment Comes with all necessary hardware 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car. This product is intended for off-road race track use only.

CMS Performance Bolt-In Roll Bar For Porsche 718 Cayman GT4RS This Roll Bar Fits the Following Cars: Porsche Cayman GT4RS, 718 (2023+) The First and Best Roll Bar Designed for the GT4RS CMS Performance has done it again! We've designed the new CMS Performance Roll Bar for the Porsche 718 Cayman GT4 RS to be the strongest, safest, and most beautifully constructed roll bar on the market. In designing the CMS Performance Roll Bar for your Porsche GT4 RS, safety and structural rigidity are, as always, our primary concerns. That's why we use 1.75 x .095" Docol R8 Advanced High-Strength Steel tubing for the main hoop and kickers and a 1.5" harness cross bar minimize weight. Docol R8 is stronger and more ductile than the Chromoly tubing other manufacturers use. The CMS Performance Porsche GT4 RS Roll Bar features a 1.5" diameter cross-bar designed to put your racing harness shoulder straps at the correct angle (0° to -20° front-to-back) and distance (about 8 inches) relative to the driver. Yet the CMS roll bar requires no cutting through the carpeting in the middle of your interior (replacing this carpet is expensive if you ever want to return your car to stock). This also provides an ideal mount for a HD Racing Video camera.   Attention To Detail Is The Hallmark Of CMS Performance Our use of Docol R8 tubing throughout also lets us to keep the driver's rear view unobstructed by the rear diagonal bracing typically used to support weaker roll bars. This also gives you unfettered access to the engine cover without removing any part of your roll bar. Other roll bars require partial removal to get at your engine -- not ideal in a car that sees track time. The CMS Performance Roll Bar for the Porsche GT4RS is designed with rear kickers that route over the incredible carbon fiber intakes and engine cover and bolt to the GT4 RS rear shock towers. These are the safest, strongest possible mounting points, adding rigidity to the chassis and suspension. The main roll hoop is mounted to the frame structure across the rear bulkhead for light weight and superior safety. Exceptional Color Options Only From CMS Performance CMS Performance will powder coat your roll bar in a brilliant color that's been custom-matched to Porsche's GT4RS OEM color palette1. We also offer powder coating in technical colors such as the amazing Superchrome! Or you can go with our rich satin black for a more stealthy look. The Best Porsche GT4RS Roll Bar At The Best Price Fully TIG welded by master welders using superior materials, the design, strength, fit, and finish of the CMS Performance GT4RS Roll Bar is second to none. You can certainly spend more on a roll bar, but can you only get the best from CMS Performance. Add Premium Racing Harnesses to Your Porsche GT4RS Add six-point Schroth Enduro 2x2 GT4, Schroth Flexi 2x2 GT4, or Sabelt Silver Series GT4 harnesses to your order and save! Or you can add either the Schroth Profi II ASM GT4 or Sabelt Porsche GT4 four-point harnesses for one or both seats. Both the six-point and four-point harnesses are specially designed to bolt directly to your Porsche GT4RS lightweight carbon bucket seats. If you're installing six-point harnesses in your Porsche, we strongly recommend adding the CMS Performance Sub Strap Mount to your seats. This custom-made steel sub strap mount provides a solid, properly located anchor for your anti-submarine strap, and it's easy to install at the same time as your roll bar. Click Here For Installation Instructions CMS Performance Porsche Cayman GT4RS Roll Bar Details Manufacturer: CMS Performance Manufacturer part no.: CPRB-GT4RS Materials: 1.75 x .095" Docol R8 Advanced High-Strength Steel; CNC-cut mounting carbon steel plates; solid steel CNC-machined interlocking roll bar joints Construction: 360o TIG welded throughout; one-piece main hoop & three-piece kickers ease installation Hardware included: all necessary American-made Grade 8 hardware Features: easy engine access without removing any part of the roll bar; no cutting your central carpet Installation: 3-4 hours with detailed instructions Porsche Cayman GT4RS Roll Bar Options Pre-cut OEM Porsche interior trim for easier installation, preserving your original trim CMS Performance Sub Strap Mount 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car. This product is intended for off-road, race track use only.

CMS Performance Ultimate Race Seat Mounting Kit This Kit Fits the Following Vehicles: Porsche 911 Carrera, 2001-2023 (All) Porsche Boxster, 2001-2023 (All) Porsche Cayman, 2006-2023 (All) Introducing Our Complete Race Seat Mounting Kit: The Ultimate Upgrade for Porsche Motorsports Enthusiasts! Are you a Porsche racing or track-day aficionado looking to upgrade your on-track safety and performance? Look no further than the CMS Performance Ultimate Racing Seat Mounting Kit. One of the very best upgrades you can make for driving your Porsche on the race track is adding a dedicated racing seat. CMS Performance designed this kit to give you a complete solution to installing your choice of seat in your Porsche. No mixing-and-matching, hunting for parts and wondering whether it'll all work together. The CMS Performance Ultimate Race Seat Mounting Kit has everything you need! Precision Engineering for Porsche Excellence The CMS Performance Ultimate Race Seat Mounting Kit is precision- engineered, tailor-made to fit a variety of race seats safely and securely in your Porsche. Crafted with meticulous attention to detail from 3/16" carbon steel, this kit draws on our many years of experience with track-prepped Porsches. Let CMS Performance help you unlock the full potential of your high-performance Porsche on the race track. Custom Powder Coat to Match Your Porsche The CMS Performance Ultimate Race Seat Mounting Kit comes standard in a durable black wrinkle-finish powder coat. CMS Performance can also custom powder-coat your kit in just about any Porsche OEM paint color you like. Simply choose "Custom Color" in the dropdown above and specify the Porsche color you want in your Order Notes at check-out. See Assembly Instructions Here CMS Performance Ultimate Race Seat Mounting Kit Includes: Mounting base w/ integrated sub strap bar (bolts securely to factory Porsche seat mounting holes) Two steel side-mount race seat brackets All necessary hardware (Grade 8) Optional: high-performance race seat slider Key Features of This Kit: Race-Ready Compatibility: Designed to seamlessly integrate with a wide range of racing seats from Sparco, OMP, Racetech and Sabelt. Our mounting kit ensures a perfect fit on the driver and/or passenger side of your Porsche. Whether you drive a 911, Cayman, or Boxster, CMS Performance has you covered. Fully Integrated: The CMS Performance kit includes everything you need to install a racing seat in your Porsche. No mixing-and-matching, so you can spend less time installing and more time racing. Lightweight Durability: Constructed from premium materials, our kit prioritizes strength without compromising on weight. The integrated design puts a premium on maintaining structural integrity. Customization Options: Tailor your installation to perfection with multiple options, including racing sliders and custom powder-coat colors. Enhanced Safety: Safety is paramount in motorsports, and our kit doesn't cut corners. It's designed to meet or exceed industry safety standards, keeping you protected during the most demanding races. Quick and Easy Installation: The CMS Performance Racing Seat Mounting Kit is engineered for straightforward installation and precise fitment. Not included: CMS Performance roll bar and race seats are available separately. Seat mounting kit is shown with optional Recaro seat slider.

Sparco RW-7 Nomex Socks The Sparco RW-7 line of Nomex undergarments is designed to provide both exceptional comfort and excellent protection. The RW-7 is made from a unique mixture of very comfortable and soft fibers. Sparco RW-7 socks are treated with Sparco’s X-Cool treatment, which draws heat from the surface of the driver's body to cool the skin. In addition to this cooling, Sparco X-Cool has an antibacterial effect. You'll stay cooler and more comfortable even in the most strenuous racing environments. X-Cool treatment ensures optimal hygiene for every race. Sparco RW-7 Nomex Sock Details Manufacturer: Sparco Manufacturer part no.: 001522 FIA 8856-2018 approved Seamless, stretchable Nomex in key areas for mobility Designed for comfort while in the driving position Minimal external seams for increased driver comfort Available in Black or White Sparco racing socks are sized according to European shoe sizes. Use the chart below to find your size.

Alpinestars Kart Racing Rain Suit Alpinestars Kart Racing Rain Suit – Lightweight, Waterproof Protection for Any Weather The Alpinestars Kart Racing Rain Suit is essential gear for any driver determined to stay dry and focused in wet racing conditions. Designed to be worn over your primary racewear, this lightweight, waterproof outer layer offers full-body coverage while maintaining mobility and breathability. As part of the trusted Alpinestars kart racing suits collection, this rain suit ensures that performance doesn’t stop when the weather turns. Engineered for high-performance karting, the Alpinestars Rain Suit features sealed seams, elastic cuffs, and an ergonomic cut to provide a secure fit without restricting movement. The transparent material allows for sponsor and suit visibility, while ventilation panels prevent overheating during wet sessions. Whether you're competing in a full race weekend or gearing up for a rainy practice run, this is the Alpinestars rain suit for karting that keeps you protected without compromising comfort. Available now at Competition Motorsport, your premier destination for the best karting suits, FIA kart suit accessories, and weather-ready gear that serious racers trust. Constructed from lightweight 100% waterproof yet breathable materials with taped seams and elasticized waist, cuffs and legs, the Kart Racing Suit is a must have accessory when taking to the track in poor conditions. The tailored fit prevents bunching and excessive flapping at speed, while the waterproof zipper and Velcro closure collar are effective at preventing water ingress. Another neat design touch is a reinforced right elbow to protect against the heat generated by the kart’s engine. The Kart Rain Suit is see-through to allow a driver’s suit to be visible. ALPINESTARS KART RACING RAIN SUIT CONSTRUCTION Inner V-shaped gusset enables use during heavy downpours. Elasticized cuffs on the wrist and ankles. Clear, waterproof suit for competition use. ALPINESTARS KART RACING RAIN SUIT KEY FEATURES Heavy duty, textiles sleeve panel for resistance against heat from the kart’s engine High profile collar provides a complete seal against the elements. Constructed with light, 100% waterproof materials and taped seams to prevent water ingress. Precise fit minimizes flapping at high speeds. Alpinestars asymmetric front opening design. ALPINESTARS KART RACING RAIN SUIT SIZES Youth sizes 120 - 150 Adult sizes XS - 3X-Large

Simple, Rugged, and Reliable Two Person Intercom The Speedcom SCC-2MPI driver coaching intercom brings features from much more expensive intercom systems and offers simple, rugged and reliable driver-to-passenger communications. Speedcom SCC-2MPI Two Person Intercom Details Manufacturer: Speedcom Manufacturer part no: SCC-2MPI Power source 1: Four AA batteries Power source 2: 12VDC vehicle power cable with cigarette lighter adapter Independent volume control: Yes Extra loud volume with superb sound quality Helmet connections: Two IMSA 4C female connectors with 2.2m (7ft. 2 in.) leads Audio output: RCA plug can send audio in real time to any recording device with an audio input Integrated roll bar mounting ears for easy installation Optional headsets can be added in the dropdown above  Two Independent Power Source Options The Speedcom SCC-2MPI has two independent power sources. For the instructor going from car to car, the 4 internal AA batteries provides multiple weekends of power. For a driver who mounts the SCC-2MPI in their car a 12V DC flying lead (open wires) can power the intercom anytime vehicle power is available. Securely Mounted Two-Person Intercom System An incredibly simple and secure roll bar "V" notch is built into the Speedcom SCC-2MPI communicator. Just add two worm-drive/jubilee clamps and you are secured beyond anything we hope you do to your car. Even rally racers. Two-Person Intercom Helmet Connections Built in are dual IMSA protocol (4C) female connectors on a lead. These dual IMSA cables are built-in and ready to connect to your Roux integrated electronics or any other helmet with an IMSA helmet kit. If your helmet is not wired, simply add two Speedcom SCC-SEIH Single Ear Intercom Headsets. This device requires headsets sold separately. Two Independent Volume Controls Dual independent volume controls are mounted on the front for easy control. The driver knob on the left has the main power control built in, eliminating the need for a secondary master power switch. The result is clean, simple, powerful sound control. Compact And Rugged The SCC-2MPI is compact and rugged. The main unit is 9 cm (3.5 in.) wide and the roll bar mount ears are 2.5 cm (1 in.) longer on each side. Available Cable Lengths If you've ever had to purchase a race car electronics extension cable, you know how frustrating it is. Why did an engineer think a 3 in. lead is going to work for a racing driver? The 12V DC power lead for the Speedcom SCC-2MPI is 1.3 meters (4 ft 3 in) long. The helmet connectors: 2.2 meters (7 ft 2 in)!

CMS Performance Bolt-In Roll Bar For Porsche 911T, GT3 & GT3RS This Roll Bar Fits the Following Cars: Porsche 911T, 992.1 with rear seat delete (2023-25) Porsche GT3, 992.1 (2022-24) Porsche GT3RS, 992.1 (2023-25) Note: This roll bar does not fit the Porsche 992.2 GT3 (2025+). That roll bar will be available in Oct 2026. The Premium Roll Bar For Porsche's Latest Track Day Animal The CMS Performance Roll Bar is the strongest, safest, highest quality bolt-in roll bar on the market for the Porsche 992 911T, GT3 and GT3RS (with the exception of our CMS Performance Clubsport Roll Bar!). In designing and building any CMS Performance roll bar, safety and structural rigidity are our primary goals. And the Porsche 992 T/GT3/GT3RS roll bar is no exception. That's why we fully 360o TIG weld 1.75" Docol R8 Advanced High-Strength Steel tubing instead of the inferior 4130 CrMo or even mild steel other roll bar manufacturers use. CMS Performance tailors the Porsche 992 911T/GT3/GT3RS roll bar to use the strongest chassis mounting points. The main roll hoop is X-braced and features a cross bar for mounting racing harness shoulder straps. Attention To Detail Is The Hallmark Of CMS Performance The CMS Performance Roll Bar for the Porsche 992 911T, GT3 and GT3RS features a harness cross-bar that places your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) and distance (as close as possible) to the driver and passenger, regardless of seat position. Our use of high-tech Docol R8 tubing and main-hoop cross bracing gives you an unobstructed rear view without the need for additional braces that add weight, complexity, and obstruct your view. CMS Performance features uniquely designed three-piece rear kickers that bolt to the Porsche 992 911T/GT3/GT3RS rear shock towers (where the factory GT3 Cup Car roll cage mounts). The safest, strongest mounting points, this adds rigidity to the chassis and suspension. The three-piece kicker design is incredibly strong while also being a breeze to install (vs. the typical one-piece design that is usually a nightmare to install). The main roll hoop is mounted to Porsche's steel frame structure beneath the vehicle just like the factory Cup Car cage. Built To Racing Specs, Finished Like A Porsche Designed using the same guidelines as a full racing roll cage and fully 360oTIG welded by our chassis fabricators and master welders, the CMS Performance Roll Bar for the Porsche 992 T, GT3 and GT3RS is unsurpassed for quality, durability, and structural integrity. We professionally powder-coat each CMS Performance Roll Bar in-house to guarantee fit and finish no other manufacturer can achieve. This also lets us use powder coat colors matched to the Porsche GT3 and GT3RS OEM paint colors for a truly customized aesthetic1. We also offer custom technical powder finishes like the amazing Superchrome (pictured above)! Or you can choose a rich satin black if stealth is more your thing. Powder coating any color you choose is included in the price of your CMS Performance Roll Bar. Don't Settle For Anything Less Than The Best Thoughtful engineering and design, superior materials, masterful fabrication, and beautiful custom finishing at an affordable price. That's the CMS Performance way of doing things. Backed by our legendary customer service, it all adds up to this: you can certainly pay a lot more for a roll bar, but you can only get the best from CMS. Add Premium Racing Harnesses To Your Porsche Add six-point Schroth Enduro 2x2 GT3, Schroth Flexi 2x2 GT3, or Sabelt Silver Series GT3 racing harness to your order and save! These harnesses are specifically designed for the Porsche 992 GT3 and GT3RS and will bolt to your factory lightweight carbon bucket seats. Or you can add four-point Schroth Profi II ASM GT3 or Sabelt Porsche GT3 4 Point harnesses, ideal for the Porsche 992 T, GT3 and GT3RS passenger seat that doesn't have a factory sub-strap pass through. With six-point harnesses, we strongly recommend using the CMS Performance Sub Strap Mount to provide a solid, properly located anchor for your anti-submarine straps. The CMS Performance Sub Strap Mount is simple to install at the same time you're installing your roll bar! Straightforward Installation Takes The Headache Out Of Roll Bars Click Here for Installation Instructions We've been through more than a few wrestling matches installing bolt-in roll bars in street cars. Fortunately, we used that experience to design the CMS Performance Roll Bar for the Porsche 992 T, GT3 and GT3RS to be a lot less frustrating to install. We hesitate to go so far as to say it's easy, but we'll say it isn't hard if you have a friend and some basic tools. CMS Performance Roll Bar Details Manufacturer: CMS Performance Manufacturer Part: CPRB-992 Material: Docol R8 Advanced High-Strength Steel, 1.75" O.D. Construction: Full-penetration 360o TIG welded; one-piece main hoop and three-piece kickers; high-strength double-bolted interlocking roll bar joints and American-made Grade 8 hardware. CNC-cut precision mounting plates Full seat travel with any seat Detailed installation instructions & all necessary hardware for a seamless installation 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car. This product is intended for off-road race track use only.