Club Benefits

PFC 0279.XX.16.44 Brake Pads PFC 11 Compound: A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from the PFC01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented PFC08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 08 Compound: One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, PFC08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. Fits the Following Vehicles: Make Model Year Notes BMW 318i 1984 - 1992 Rear BMW 318is 1991 - 1992 Rear BMW 325 1986 - 1988 Rear BMW 325e 1984 - 1987 Rear BMW 325es 1986 - 1987 Rear BMW 325i 1987 - 1991 Rear BMW 325iS 1987 - 1991 Rear BMW 325iX 1988 - 1991 Rear BMW 524td 1985 - 1986 Rear BMW 528e 1982 - 1988 Rear BMW 533i 1983 - 1984 Rear BMW 535i 1985 - 1987 Rear BMW 635CSi 1985 - 1989 Rear BMW 735i 1985 - 1986 Rear BMW L6 1987 Rear BMW L7 1986 - 1987 Rear BMW M5 1988 - 1990 Rear BMW M6 1987 - 1988 Rear

Schroth Clubman 2x2 6 Point Racing Harness Schroth's Clubman has one aim: to provide a superior harness for people needing a lower-cost belt. The Clubman features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" Clubman pull up lap belts, and a T-bar non adjustable sub strap. Shoulders and sub strap hardware is wrapped in. The FHR specific shoulder belts are designed to make FHR use safer and more comfortable. The full 2" shoulder webbing fits perfecting on a FHR device, creating optimal force distribution on the surface of the device. Adjusters and Options The adjusters on the Clubman belt are heavier and not as easy to use. They are, however, cheaper and bring down the overall cost of the harness. In addition the sub strap does not have adjusters and the lap hardware is not interchangeable. Only available with snap-in, pull-up lap belts. Laps are not reversible like they are on the Flexi 2x2. Schroth Clubman 2x2 Harness Details Manufacturer: Schroth Manufacturer part no.: SR 94570-0 2” shoulder belts 2” Profi pull-up lap belts with sewn-in snap-in hardware T-bar sub non-adjustable strap Rotary cam lock

A1-291 Girodisc Porsche 718 GT4 RS Front Rotors (408×36 mm) Price: $1,950.00 These Girodisc A1-291 2-piece front rotors are a direct replacement for the Porsche 718 GT4 RS with the factory iron brake system. Weighing about ~29 lb per rotor, the fully floating design reduces unsprung/rotational mass while retaining OEM calipers, ABS, and brake bias. Vehicle Fitment Porsche 718 Cayman GT4 RS (982) – Front, OEM iron brakes (not PCCB) High-Carbon Rings & Curved-Vane Cooling The rotor rings are machined from a proprietary high-carbon iron casting for durability and heat capacity. Curved internal vanes (72-vane) act as a centrifugal pump to pull cooling air through the disc under hard use. The 2-piece construction allows reuse of the aluminum hat with D1-291 replacement rings. Dimensions Diameter: 408 mm Thickness: 36 mm Weight: ~29 lb per rotor assembly Features Direct OEM replacement; no modifications required 2-piece floating design reduces unsprung & rotational mass Reusable 6061-T6 aluminum hats; cadmium-plated hardware Manufactured and assembled in Bellingham, WA Sold/priced per pair A1-291 FAQs Does this fit PCCB cars? No — this listing is for cars with OEM iron rotors. Minimum service thickness? Replace when rings reach 34 mm, or earlier if a crack reaches the outer edge. Which replacement rings? D1-291 (pair, with hardware) for Girodisc hats.

AiM Trackday Kit Short Cable for SmartyCam3 The AiM Trackday kit mount offers a neat solution for connecting your Solo2 DL & SmartyCam3 without dealing with the two meter cable normally included with the Smartycam. If you need the mount for your Solo2 DL and SmartyCam3, that can be found here! AiM Trackday Kit Short Cable for SmartyCam3 & Solo2 DL Details: Manufacturer: AiM Sports Manufacturer Part Number: V02554910 Cable Length: Approx. 7" (18 cm) 712 5-pin male to 712 5-pin male

Sparco Land Classic Nomex Racing Gloves The Sparco Land Classic Nomex Gloves bring traditional motorsport styling to a modern, competition-approved racing glove. Based on Sparco’s proven Land platform, the Land Classic uses vintage-inspired Cream and Navy colorways while retaining the fire-resistant protection, steering feedback, and secure fit required for current racing environments. An ergonomic palm follows the natural position of the hand around the steering wheel, while reinforced stitching supports durability in high-contact areas. Updated suede grip material across the palm and fingertips improves traction without adding unnecessary bulk between the driver and the wheel. Approved to both FIA 8856-2018 and SFI 3.3/5 standards, the Sparco Land Classic is a practical choice for drivers who prefer understated heritage styling over modern graphic-heavy glove designs. Vintage Colorways with a Competition-Ready Construction The defining feature of the Land Classic is its restrained, period-inspired appearance. The Cream and Navy color options complement historic race cars, vintage-style driving suits, restoration projects, and classic motorsport liveries without looking like a costume or replica accessory. Beneath the traditional color palette is a fully modern protective glove engineered for sanctioned auto racing. This gives drivers the look of earlier motorsport equipment with the certification and construction expected from current Sparco safety gear. Ergonomic Palm Designed Around the Steering Wheel The palm is shaped to conform to the hand’s natural driving position. This reduces excess material when the fingers are wrapped around the steering wheel and helps the glove remain properly positioned during braking, cornering, and repeated steering corrections. Reinforced stitching supports the palm structure and helps maintain the glove’s fit through regular use. The result is a stable, responsive connection between the driver and the wheel. Updated Suede Grip at the Palm and Fingertips Sparco redesigned the grip surfaces with suede anti-slip material across the palm and fingertips. The textured suede provides dependable traction while preserving the tactile feedback many drivers prefer from a traditional racing glove. Fingertip reinforcement also improves control when using switches, paddle shifters, steering-wheel buttons, and gear levers. Unlike thick rubberized overlays, the suede grip maintains a soft, natural feel. Elastic Wrist for Simple, Secure Retention An elasticated wrist holds the glove securely in place without requiring an external strap or bulky closure. The streamlined design allows quick entry and removal while maintaining dependable overlap with a compatible racing suit sleeve. The elastic wrist also helps accommodate a wider range of hand shapes, contributing to the Land Classic’s comfortable and familiar fit. Accessible Performance for Club and Professional Drivers The Land Classic is positioned as an entry-level competition glove, but its construction includes the essential features drivers depend on: certified fire resistance, a shaped palm, reinforced stitching, suede grip, and a secure wrist. Its straightforward design avoids unnecessary layers and complex closures, making it a strong value for drivers who want certified protection and clear steering feedback in a classic-looking glove. Dual FIA and SFI Certification The Sparco Land Classic Nomex Gloves are approved to FIA 8856-2018 and SFI 3.3/5 standards. Carrying both certifications makes the glove suitable for a wide variety of racing organizations and competition formats. Drivers should verify the exact glove standard required by their sanctioning body before participating in an event. Sparco Land Classic Nomex Glove Features Vintage-inspired Sparco Land glove design Available in Cream or Navy Fire-resistant competition glove construction Ergonomic palm follows the natural driving position Reinforced palm stitching improves durability Updated suede anti-slip palm grip Suede fingertip grip improves cockpit control Low-bulk construction preserves steering feedback Elastic wrist provides secure retention Easy on-and-off design FIA 8856-2018 approved SFI 3.3/5 approved Sparco Land Classic Glove Specifications Manufacturer: Sparco Model: Land Classic Product Type: Nomex Auto Racing Gloves Palm Design: Ergonomic with reinforced stitching Grip Material: Suede palm and fingertips Wrist: Elasticated Available Colors: Cream and Navy Homologation: FIA 8856-2018 and SFI 3.3/5 A Traditional Alternative to Modern Racing Gloves Many current racing gloves use aggressive graphics, silicone patterns, and complex multi-panel construction. The Sparco Land Classic takes a simpler approach with subdued colors, traditional suede grip, and a clean silhouette. For drivers building a cohesive vintage-inspired cockpit or simply preferring a less flashy glove, the Land Classic delivers a distinctive look without compromising current safety certification. Sparco Land Classic Nomex Glove Size Chart Frequently Asked Questions Are the Sparco Land Classic Gloves FIA approved?Yes. They are approved to the FIA 8856-2018 standard. Are the Sparco Land Classic Gloves SFI approved?Yes. They also meet the SFI 3.3/5 standard. What colors are available?The Land Classic is available in Cream and Navy vintage-inspired colorways. What material is used for the grip?Suede anti-slip material is used across the palm and fingertips to improve traction and steering feedback. What is the benefit of the ergonomic palm?It follows the natural shape of the hand around the steering wheel, helping reduce bunching and maintain a stable fit. Do these gloves have a wrist strap?No. An elastic wrist holds the glove securely in place without a separate closure strap. Are the Land Classic Gloves only intended for vintage racing?No. Their appearance is vintage-inspired, but their FIA and SFI certifications make them suitable for modern competition where those standards are accepted. How should Sparco Land Classic Gloves fit?They should fit closely around the palm and fingers without restricting movement or leaving excess material at the fingertips.

Antigravity SC-4 Super-Charger The Antigravity SC-4 Super-Charger is a compact 4-Amp charging solution built for everyday riders, weekend racers, and anyone who wants reliable battery maintenance. Perfect for lithium or lead/acid batteries up to 120Ah, this smart charger combines advanced safety protections with easy-to-use features. Whether you’re prepping your track car, maintaining a motorcycle during the off-season, or keeping a tractor ready for work, the SC-4 delivers dependable power without the guesswork. Smart charging made simple Antigravity SC-4 Super-Charger Features Multi-use versatility: works with cars, trucks, motorcycles, ATVs, UTVs, RVs, tractors, boats, and more. Multi-chemistry support: compatible with Lithium (LiFePO4/LFP) and Lead/Acid (AGM, STD, GEL, WET, VRLA). Multi-voltage operation: charges 6V and 12V lithium plus 12V lead/acid types. LCD digital display: shows real-time voltage, current, and charging progress. Two-button simplicity: quickly select battery type or special function. Built-in voltage tester: monitor your battery health without extra tools. Power supply mode: delivers 14v at 4A to keep electronics live during swaps. BMS Re-Set function: wakes lithium batteries that enter protection mode. Recondition mode: attempts to revive sulfated or undercharged lead/acid batteries. Automatic Winter Mode: optimized charging in cold conditions. Compact size: 7.8 x 3.7 x 1.8 inches with IP65 protection rating. Specifications Input Voltage 110–120V AC ~ 50–60 Hz (US plug) Output Voltage 6V / 12V DC Max Output Current @ 6V 2A Max Output Current @ 12V STD/AGM/LFP 4A Battery Capacity Range 3Ah – 120Ah Recondition Mode 16.5V DC / 1.5A (lead/acid only) Operating Temperature -4°F to 104°F (-20°C to 40°C) Protection Class Class II, IP65 Dimensions 7.8" × 3.7" × 1.8" Warranty 3 years UPC 711811704901 SKU AG-BC-SC-4 FAQs: Antigravity SC-4 Super-Charger What size batteries can the SC-4 handle? It’s designed for battery capacities from 3Ah up to 120Ah, making it ideal for motorcycles, ATVs, and daily drivers. Is the SC-4 safe to leave connected long-term? Yes. It has automatic maintenance mode and built-in safety protections, so you can keep it connected without worry. How is the SC-4 different from the SC-10? The SC-4 provides 4A charging, best for small to mid-size batteries. The SC-10 offers faster 10A charging and is better for larger-capacity batteries. Can I use it for battery swaps? Absolutely. The 4A power supply function keeps vehicle electronics energized so you don’t lose settings during battery changes. Keep your batteries healthy and ready to go with the Antigravity SC-4 Super-Charger. Order today and enjoy dependable, easy-to-use charging technology built for real-world performance.

Bell GT6 RD ULTRA-4C/EC Carbon Fiber Pre-Order: Shipping in Sept 2026 FIA 8859-2024/SA2025 Helmet The Bell GT6 RD ULTRA-4C/EC delivers pro-grade safety and communication in a lightweight, closed-cockpit package. Drawing design inspiration from the aggressive HP6 platform, it features a wide eyeport for integrated visibility, a premium carbon composite shell, and all-in communications and hydration solutions built in. 4C: Carbon Composite 4 Layer Construction On Bell helmets, “4C” stands for “Carbon Composite 4 Layer Construction.” It refers to the shell technology Bell uses: a 4-layer carbon composite laminate. This blend typically combines carbon fiber with other advanced fibers (like Kevlar® or fiberglass) in multiple layers. The purpose is to deliver a shell that is lighter than fiberglass alone, but more affordable and versatile than Bell’s top-end full carbon HP series shells (like HP7 or HP77 which use pure carbon/advanced aerospace layups). EC: Electronic Communications Integration The "EC” in model name means the helmet incorporates an electronic comms and hydration kit integration. The closed-face GT6 RD ULTRA-4C/EC integrates the latest technology from ZeroNoise® including advanced electronics, high power speakers, and noise canceling microphone to assure outstanding performance, sound insulation, and communication efficiency. Ultra-Light Carbon Construction Meets Pro Racing Preparedness Built with superior carbon-glass composite materials, the helmet keeps fatigue low and track awareness high. Integrated ZeroNoise® electronics, high-power speakers, and a noise-canceling mic ensure outstanding comms and sound insulation. The face piece is also optimized for ventilation and hydration—perfect for endurance and closed-cockpit racers. Bell GT6 RD ULTRA-4C/EC Carbon Fiber SA2025 Helmet Size Chart Bell GT6 RD ULTRA-4C/EC Carbon Fiber SA2025 Helmet Details Design Derived From: HP6 RD-4C platform Shell: Ultra-lightweight carbon-glass composite Certifications: FIA 8859-2024 and Snell SA 2025 Eyeport: Wide for expanded visibility ZeroNoise® Comms: Built-in speakers, noise-canceling mic, and heavy-duty coil cable with Nexus connector Hydration: Integrated drink-tube channels and side connectors Ventilation: Extraction vents + optional top/side forced-air intake compatibility HANS Anchors: Factory-installed for added safety Color & Finish: Gloss Carbon Interior: Dark grey, high-strength FR fabric (alt interior colors by special order) Sizes: 54 (6¾) through 61+ (7 ⅝) Bell GT6 RD ULTRA-4C/EC Carbon Fiber SA2025 Helmet Features Ultra-lightweight Premium Carbon shell Equipped with Bell Racing SmartLock Mechanism Wide eyeport opening for optimal vision in closed cockpit cars (Shield type SE06) Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Integrated channels in face piece offering multiple options to install drinking tube, valves and radio systems Extraction vents to maximize cooling and air circulation Integrated technology from ZeroNoise® including advanced electronics high power speakers, and noise canceling microphone Factory installed Hans anchors as original equipment Optional Top and Side air intakes available for use with external cooling system Compatible with interior parts kits and drinking tube kits Bell GT6 RD ULTRA-4C/EC Carbon Fiber SA2025 Helmet FAQs What does “4C/EC” mean?4C stands for "Carbon Composite 4 Layer Construction", and EC indicates electronic communication and hydration integrations are factory-installed. Which helmet series does this come from?Derived from the closed-cockpit GT6 platform with HP6 lineage—designed for serious GT and endurance racers. What communication system is included?An integrated ZeroNoise® kit with high-power speakers, a noise-canceling mic, Nexus connector, and hydration ports come built in. Can I add forced air later?Yes. Compatible top and side intake kits are available for enhanced cooling. Is this track-legal?Yes. It’s dual-certified to FIA 8859-2024 and Snell SA2025—check your series rules to confirm. What customization options exist?Alternate interior colors, ear muff covers, and aero accessories are available by special order or as add-ons. Race with lightweight carbon construction, pro-level comms, and cockpit-focused visibility.

Stilo Female Hydration System Coupling Use with Stilo ST5 and ST6 GT Helmet  Hydration Kits Engineered to seamlessly integrate into your Stilo ST5/ST6 GT helmet hydration system. Contains one YA0604 female connector for use with the Stilo YA0600 helmet hydration kit.

Sparco Martini Racing Livery Travel Bag Race-Ready, TSA-Friendly Race weekends and air travel don’t always mix—until now. The Sparco Martini Racing Travel Rolling Bag is designed for racers who need a carry-on bag that fits in the overhead bin but still hauls all the essentials. Whether you're flying to a race, heading to a motorsport expo, or just want a stylish way to carry your gear, this compact-yet-spacious bag is built for the job. With reinforced wheels, protective padding, and styling inspired by the iconic Martini Racing teams, the Sparco Martini Racing Travel Bag is more than just luggage—it’s a statement. And yes, it fits your helmet (minus the frustration of checking it in). Why Choose the Sparco Martini Racing Travel Bag? Carry-On Approved: No more baggage claim delays—this TSA-friendly size lets you keep your gear close.Protective & Padded: Quilted interior and reinforced under compartment protect your racing essentials from rough handling.Stay Organized: Multiple internal pockets + a front document pocket = everything stays in its place.Effortless Travel: Reinforced wheels and a sturdy telescoping handle make navigating terminals, paddocks, and pit lanes a breeze.Secure Packing: Double adjustable closure straps keep your contents from shifting, no matter how fast you’re moving.Stylish Yet Functional: Available in black/red or black/silver—because your bag should look as fast as you drive. Sparco Martini Racing Travel Bag Details Manufacturer: Sparco Manufacturer part no.: 016438 Dimensions: H10" x L22" x W14" Capacity: 1.7 cu. ft. (48 liters) Weight: 6.6 lbs. (3.0 kg) Features: Carry-on compliant size Protective padding with quilting Upper compartment for soft items like gloves & underwear Internal front document pocket Reinforced wheels & telescoping handle Double adjustable closure straps FAQs – Because We Know You Have Questions Q: Will this bag fit in overhead compartments?A: Yes! The 22” length is within most airlines' carry-on size limits. Just don’t overpack it like a spare tire in a GT3 trunk. Q: Can I fit my helmet in this bag?A: Your helmet will fit if packed carefully, but it’s tight. If you’re carrying multiple racing items, you may want to check out the Sparco Martini Racing Tour Bag for extra space. Q: Are the wheels durable enough for frequent travel?A: Absolutely! The reinforced wheels are designed to handle airport terminals, paddock lots, and everything in between. Q: Does this bag have a laptop sleeve?A: While it doesn’t have a dedicated laptop compartment, the internal front document pocket is great for storing paperwork, tablets, or a small laptop. Take Off with the Perfect Carry-On You wouldn’t settle for second place on track—so why settle for a subpar travel bag? The Sparco Travel Rolling Bag is designed for racers who need performance, protection, and convenience in a carry-on size. Fly smarter, travel lighter, and race harder—grab yours today!

Sparco Competition Driver Race Suit (Boot Cuff) The Sparco Competition Driver Race Suit with Boot Cuffs combines lightweight fire-resistant materials, breathable stretch panels, and an ergonomic driving fit at an excellent value. Designed for competitive auto racing, the Competition delivers many of the comfort and mobility features normally found in higher-priced professional racing suits. The latest generation of synthetic fire-resistant fabrics provides a soft, lightweight outer surface with a comfortable and breathable interior. Pre-curved arms and legs help place the suit naturally in the seated driving position, reducing pulling and material bunching around the elbows, knees, shoulders, and waist. This boot-cuff version replaces traditional ankle knit cuffs with a wider pant-leg opening designed to fit over racing shoes. The result is a clean, relaxed appearance with less material concentrated around the ankle. Boot-Cuff Pant Leg Design The boot-cuff construction allows the lower portion of the suit to sit over the top of the racing shoes rather than tucking inside them. This design reduces bulk around the ankles and provides the traditional boot-cut appearance preferred by many drivers. Lightweight Fire-Resistant Construction The Sparco Competition is made from modern synthetic fire-resistant materials selected for their balance of protection, low weight, and comfort. The soft outer fabric and breathable interior help reduce fatigue during sprint races, endurance events, autocross, time trials, and track days. Unique Elastic Arm Cuffs The Competition features Sparco’s distinctive elastic wrist-cuff system. The slim cuffs are designed to fit easily inside the gauntlets of racing gloves, helping create a smooth overlap between the suit and gloves without excessive material bunching around the wrists. Pre-Curved Arms and Legs Pre-curved sleeves and pant legs follow the driver’s natural seated position. This ergonomic shaping improves comfort while steering, shifting, and operating the pedals and helps reduce tension across the shoulders, elbows, hips, and knees. Large Rear Mesh Stretch Panel A large stretch panel across the rear of the suit improves upper-body mobility and allows the suit to move with the driver. This reduces pulling across the shoulders and back when reaching for the steering wheel or controls. Breathable Inner-Thigh Stretch Panel A strategically positioned mesh stretch panel in the inner-thigh area improves airflow and flexibility around the hips, groin, and upper legs. The breathable construction helps manage heat while reducing restriction in the seated driving position. Sparco Competition Boot Cuff Race Suit Features Professional driver racing suit with boot-cuff pant legs FIA 8856-2018 homologated SFI 3.2A/5 approved Lightweight synthetic fire-resistant construction Soft outer fabric for increased comfort Breathable interior materials Unique elastic wrist-cuff system Wrist cuffs designed to fit inside racing-glove gauntlets Pre-curved arms and legs Large rear mesh stretch panel Breathable inner-thigh stretch panel Improved mobility in the seated driving position Boot-cut lower legs designed to fit over racing shoes Available in five colorways Available in European sizes 48–66 Technical Specifications Product: Sparco Competition Driver Race Suit Manufacturer: Sparco Cuff Style: Boot cuff Material: Synthetic fire-resistant fabric Arm Design: Pre-curved with elastic wrist cuffs Leg Design: Pre-curved with boot-cuff openings Rear Panel: Large mesh stretch panel Inner-Thigh Panel: Breathable mesh stretch construction Certification: FIA 8856-2018 and SFI 3.2A/5 European Sizes: 48–66 Colorways: Five available combinations Sparco Competition Driver Race Suit Sizing Chart Frequently Asked Questions Is the Sparco Competition Driver Race Suit FIA approved? Yes. The Sparco Competition is homologated to the FIA 8856-2018 standard. Drivers should confirm the current equipment requirements for their racing organization, class, and event. Is the Sparco Competition suit SFI approved? Yes. The suit is also approved to the SFI 3.2A/5 standard for many forms of sanctioned auto racing. What does boot cuff mean on a racing suit? A boot-cuff racing suit has wider lower pant legs designed to fit over the top of racing shoes. Standard ankle cuffs are narrower and are normally tucked inside the shoes. Does the boot-cuff design change the suit’s certification? No. The boot-cuff version maintains the suit’s FIA 8856-2018 and SFI 3.2A/5 certifications. It primarily changes the fit and appearance of the lower pant legs. Does the Sparco Competition provide good mobility? Yes. Pre-curved arms and legs, a large rear stretch panel, and a breathable inner-thigh panel help the suit move naturally with the driver. What is special about the wrist cuffs? The Competition uses slim elastic wrist cuffs designed to tuck easily inside the gauntlets of racing gloves. This helps reduce bulk and creates a secure overlap between the suit and gloves. Is the Sparco Competition suitable for endurance racing? Yes. Its lightweight fabric, breathable inserts, and multiple stretch panels make it a comfortable option for endurance racing and other events involving extended periods behind the wheel. How should the Sparco Competition race suit fit? The suit should fit comfortably while the driver is seated, with enough room for approved fire-resistant underwear. It should not pull tightly across the shoulders, back, waist, or knees, and it should not contain excessive loose material. What sizes are available? The Sparco Competition Driver Race Suit is available in European sizes 48 through 66. How should the race suit be cleaned? Follow the washing instructions printed on the suit’s internal care label. Close the zipper and hook-and-loop sections before washing, use a mild approved detergent, and avoid bleach, fabric softener, and excessive heat. Lightweight Comfort and Race-Ready Protection The Sparco Competition Driver Race Suit with Boot Cuffs offers an excellent balance of certified protection, breathable comfort, mobility, and value. Its pre-curved construction, unique wrist cuffs, large rear stretch panel, inner-thigh ventilation, and boot-cut pant legs make it a versatile choice for club racers, professional competitors, and serious track-day drivers.

Sabelt Universe TS-8 Driver Race Suit The Sabelt Universe TS-8 Driver Race Suit is built for serious drivers who want premium safety, comfort, and professional motorsport style in one lightweight package. Made in Italy from 100% Nomex fabric, this two-layer racing suit is FIA 8856-2018 homologated and designed for excellent mobility, breathability, and protection during demanding race conditions. Sabelt Universe TS-8 Driver Race Suit Features FIA 8856-2018 homologation for current international motorsport safety compliance. Available with SFI 3.2A/5 and SFI 3.4 certification by special request. 100% Nomex construction provides trusted fire-resistant protection. Lightweight two-layer design with approximately 310g/m² fabric weight. Breathable ergonomic material helps improve comfort during long sessions. Integrated bi-stretch panels support flexibility and a slim, tailored fit. Full floating sleeves and pre-curved arms help reduce bunching while driving. Ultrathin stitching improves comfort and gives the suit a clean professional finish. Lateral pockets provide convenient storage without disrupting the suit’s fit. Lightweight cuffs, lower neck collar, and YKK 3T zipper add comfort and durability. Embroidered Sabelt logos complete the refined race-ready appearance. Built for Professional-Level Comfort and Mobility The Sabelt Universe TS-8 is engineered to feel light, flexible, and comfortable when seated in the car. Full floating sleeves, anti-bunching pre-curved arms, and bi-stretch elastic panels help drivers move naturally through steering, shifting, and cockpit adjustments. The lower neck collar and lightweight cuffs reduce restriction, making the suit easier to wear during long race weekends.   Sabelt Universe TS-8 Driver Race Suit Specifications Manufacturer: Sabelt Model: Universe TS-8 Certification: FIA 8856-2018 Optional Certification: SFI 3.2A/5 and SFI 3.4 by special request Material: 100% Nomex Layers: 2 Fabric Weight: 310g/m² Fit: Slim fit Zipper: YKK 3T Available Sizes: 44-66 Available Colors: White, Red, Black, and Blue Sabelt Universe TS-8 Driver Race Suit FAQs Is the Sabelt Universe TS-8 FIA approved?Yes. The Sabelt Universe TS-8 Driver Race Suit is FIA 8856-2018 homologated for current motorsport safety requirements. Can the Sabelt Universe TS-8 be ordered with SFI certification?Yes. The Universe TS-8 is available with SFI 3.2A/5 and SFI 3.4 certification by special request. What material is the Sabelt Universe TS-8 made from?The suit is made from 100% Nomex fabric, which is widely used in motorsports for its fire-resistant performance. Is the Sabelt Universe TS-8 a slim-fit suit?Yes. The Universe TS-8 uses a slim-fit design with ultrathin stitching and bi-stretch panels for a tailored feel without sacrificing driver mobility. Does the Sabelt Universe TS-8 help with movement in the car?Yes. Full floating sleeves, pre-curved arms, and elastic stretch panels help reduce restriction and bunching while seated in the cockpit. What sizes are available for the Sabelt Universe TS-8?The Sabelt Universe TS-8 Driver Race Suit is available in sizes 44 through 66. Choose the Sabelt Universe TS-8 Driver Race Suit for premium Italian craftsmanship, FIA-approved protection, and the lightweight comfort serious drivers need on race day.  

OMP 320 ALU S Steering Wheel Flat Design. Built for Control. The OMP 320 ALU S Steering Wheel delivers professional-level control and comfort in a compact, motorsport-ready design. With a 320 mm diameter and flat profile, it’s ideal for tight cockpits and performance builds where responsiveness is key. Its three anodized aluminum spokes combine strength and lightness, while the black suede cover with pre-formed handgrips ensures maximum traction and comfort during aggressive driving. Designed with functionality in mind, the 320 ALU S comes supplied with two individual buttons—perfect for wiring auxiliary functions like horn, high beams, or other racing essentials. Whether for a dedicated track car or a dual-purpose street machine, this steering wheel provides an unmatched balance of ergonomics and durability. Features & Benefits 320 mm Flat Design: Compact and responsive, perfect for racing cockpits. Three Anodized Aluminum Spokes: Lightweight yet durable construction. Pre-Formed Handgrips: Contoured for superior feel and reduced fatigue. Premium Black Suede Cover: Delivers glove-friendly grip and control. Integrated Buttons: Includes two accessory buttons for horn, high beams, or other functions. Race-Bred Ergonomics: Optimized for comfort and precision in performance driving. Technical Specifications Diameter: 320 mm Profile: Flat Spokes: 3 anodized aluminum Handgrip Shape: Oval 35x24 mm Cover Material: Black suede Buttons: 2 accessory buttons included Why Choose the OMP 320 ALU S? Blending sleek design, high-performance materials, and functional versatility, the OMP 320 ALU S Steering Wheel is built for drivers who demand comfort, control, and race-ready functionality. From endurance racers to weekend track warriors, this wheel puts everything you need right at your fingertips.

OMP KS-XR KART RACING SHOE OMP KS-XR Kart Racing Shoes The OMP KS-XR Kart Racing Shoes combine lightweight construction, responsive pedal control, and a secure precision fit for competitive kart racing. Designed for drivers who demand comfort and control during intense indoor and outdoor sessions, the KS-XR delivers the support and sensitivity needed to confidently attack every braking zone and corner. The upper is constructed from lightweight perforated microfiber to promote airflow without sacrificing durability. A rotor-style closure system provides quick, precise adjustment across the foot, while the flexible rear bellow allows natural ankle movement when operating the pedals. A new-generation karting outsole provides dependable grip and direct pedal feedback. Combined with an anatomical insole and strategically reinforced areas, the OMP KS-XR offers a balanced blend of comfort, stability, and performance for developing racers and experienced karting competitors. Precision Rotor Lacing System The KS-XR uses a rotor-style closure inspired by OMP professional racing footwear. Turning the adjustment dial evenly tensions the closure cable, allowing the driver to create a secure and personalized fit without conventional loose laces. The quick-adjustment design makes it easy to tighten or release the shoes between sessions while helping maintain consistent support throughout the race. Lightweight Perforated Microfiber The upper is constructed from lightweight microfiber with strategically positioned perforations. This breathable design promotes airflow around the foot and helps reduce heat buildup during long practice sessions, qualifying runs, and races. Microfiber also provides the flexibility required for smooth pedal operation while maintaining the durability needed for regular karting use. New-Generation Karting Sole The specialized outsole is designed to provide dependable grip and responsive pedal sensitivity. Its low-profile construction helps the driver feel subtle changes in brake and throttle pressure while maintaining secure contact with the pedals. Flexible Rear Ankle Bellow A flexible bellow at the rear of the shoe allows the ankle to move naturally during braking and throttle operation. This helps reduce restriction while maintaining support around the heel and upper ankle. Anatomical Comfort and Support An anatomically shaped insole supports the natural contours of the foot and helps distribute pressure more evenly. The supportive interior construction improves comfort during extended track time without creating unnecessary bulk. Reinforced High-Wear Areas Strategically positioned reinforcement helps protect areas exposed to repeated contact with the kart, pedals, and chassis. The added protection improves durability while preserving the shoe’s lightweight feel. FIA 8877-2022 Karting Homologation The OMP KS-XR is homologated to the FIA 8877-2022 karting equipment standard. This certification makes the shoe suitable for karting competitions that require footwear meeting the current FIA karting standard. OMP KS-XR Kart Racing Shoe Features Designed specifically for competitive kart racing FIA 8877-2022 homologated Lightweight perforated microfiber upper Breathable construction for improved airflow Precision rotor-style closure system Quick and evenly distributed fit adjustment New-generation high-grip karting outsole Responsive brake and throttle pedal feedback Flexible rear ankle bellow Anatomically shaped supportive insole Strategically reinforced high-wear areas Suitable for indoor and outdoor karting Available in multiple performance-oriented colorways Technical Specifications Product: OMP KS-XR Kart Racing Shoes Manufacturer: OMP Product Type: Kart racing shoes Upper Material: Lightweight perforated microfiber Closure: Rotor-style cable adjustment system Rear Construction: Flexible ankle bellow Insole: Anatomically shaped supportive footbed Outsole: High-grip, high-sensitivity karting sole Certification: FIA 8877-2022 Available Colors: Black/Silver and Black/Silver/Fluorescent Yellow European Sizes: 36–48 OMP KS-XR Kart Racing Shoe Size Chart Frequently Asked Questions Are the OMP KS-XR Kart Racing Shoes FIA approved? Yes. The OMP KS-XR is homologated to the FIA 8877-2022 karting equipment standard. Drivers should confirm the current footwear requirements for their racing series, class, and event. What is the benefit of the rotor lacing system? The rotor closure evenly tensions the shoe across the foot and allows quick, precise fit adjustments. It also eliminates loose conventional laces that may require readjustment between sessions. Are the OMP KS-XR shoes breathable? Yes. The lightweight microfiber upper includes strategically positioned perforations that promote airflow and help reduce heat buildup during demanding karting sessions. Do the OMP KS-XR shoes provide good pedal feel? Yes. The low-profile karting outsole is designed to provide direct brake and throttle feedback while maintaining dependable grip on the pedals. What does the rear ankle bellow do? The flexible rear bellow allows the ankle to move naturally when braking and accelerating while maintaining support around the heel. Can the OMP KS-XR be used for indoor karting? Yes. The breathable upper, secure closure, and responsive sole make the KS-XR suitable for both indoor and outdoor kart racing. Are the OMP KS-XR shoes fire resistant? No. The KS-XR is designed and homologated for kart racing and is not intended to replace fire-resistant auto racing footwear. Drivers competing in auto racing events should select shoes approved for the fire-protection standard required by their organization. Can the OMP KS-XR be used for auto racing? The KS-XR is intended for karting. It should not be used in auto racing classes that require fire-resistant FIA 8856-2018 or SFI-approved driver footwear. What sizes are available? The OMP KS-XR is available in European sizes 36 through 48. Refer to the OMP size chart and measure carefully before selecting a size. How should the OMP KS-XR fit? The shoes should fit securely around the heel and midfoot without painful pressure points or restricted circulation. The rotor closure should feel supportive without being overtightened. How should the OMP KS-XR Kart Racing Shoes be cleaned? Clean the exterior with a damp cloth and mild soap, then allow the shoes to air dry naturally. Do not machine wash, submerge them in water, or place them near direct heat. Precision Fit and Responsive Karting Performance The OMP KS-XR Kart Racing Shoes combine breathable microfiber, precise rotor adjustment, a flexible ankle bellow, and a responsive high-grip outsole. Their FIA 8877-2022 homologation and driver-focused construction make them an excellent choice for competitive indoor and outdoor kart racing.

Sparco K-Track Rib Protector FIA 8870 Rib Protection for Karting’s Elite When every corner pushes your limits, your gear should never hold you back. The Sparco K-Track Rib Protector is engineered for serious kart racers who demand top-tier protection, agility, and FIA-certified compliance. Designed for both rising talent and experienced competitors, this FIA 8870 rib protector blends advanced materials and ergonomic fitment to shield your ribs without sacrificing mobility or focus on the track. The K-Track’s ultra-lightweight composite shell disperses impact forces while maintaining a slim, comfortable profile under any karting suit. Internal padding delivers precise pressure distribution and breathability, keeping you cool during long sessions. With sizes and fitments for youth and adult racers, the Sparco K-Track kart rib protector ensures an elite-level fit tailored for peak kart racing performance and safety. Sparco K-Track Kart Racing Rib Protector Highlights Certified to the latest FIA 8870-2018 kart rib protector homologation Lightweight, rigid shell with optimized impact absorption zones Ergonomic shaping for full freedom of movement while cornering Adjustable closures for a secure, tailored fit under karting suits Available in youth and adult sizes to suit all serious kart racers The Sparco K-Track is a hybrid rib protector vest designed to provide lightweight and flexible protection to drivers. It has been developed to exceed the standards set by the latest FIA 8870-2018 homologation, ensuring the highest levels of safety and protection. The K-Track features a sternum plate that adds an extra layer of protection to the driver's chest. The sides of the vest have multiple adjustments, allowing for a customized fit, and it has a soft stretch inner liner that conforms to the driver's shape in the seated position, offering enhanced comfort. Sparco K-Track Kart Racing Rib Size Chart Sparco K-Track Kart Racing Rib Protector FAQs Q: Is the Sparco K-Track rib protector FIA certified?A: Yes, it meets the FIA 8870-2018 homologation, making it legal for use in national and international karting events. Q: Who should wear the K-Track rib protector?A: It’s designed for competitive kart racers—both youth and adults—looking for maximum rib protection without compromising comfort or performance. Q: What materials are used in the construction?A: The K-Track features a high-strength composite outer shell with energy-absorbing internal foam and breathable liner. Q: Can it be worn under all karting suits?A: Yes, the low-profile ergonomic design fits easily under modern CIK/FIA-compliant kart suits. Q: Is the K-Track suitable for youth drivers?A: Absolutely. The K-Track comes in youth-specific sizing, ensuring proper fit and protection for smaller drivers. Q: How do I choose the right size?A: Refer to the chest circumference and driver height sizing chart to select the proper youth or adult size. Q: How is the rib protector secured?A: The K-Track uses adjustable shoulder and waist straps for a stable, customized fit during aggressive karting maneuvers.

Sabelt Hero Superlight Women's TS-10 Driver Race Suit Light, Comfortable, and FIA 8856-2018 Approved The Sabelt Hero Superlight Women's TS-10 Driver Race Suit is a professional-level women’s racing suit designed for drivers who want ultra-lightweight comfort, modern protection, and a fit tailored specifically for female racers. Built with premium multi-layer Nomex materials, the TS-10 delivers FIA-approved safety without unnecessary bulk. At only 265 g/m², the Hero Superlight TS-10 is one of the lightest women’s driver suits available. Its slim, ergonomic cut helps reduce excess material, while stretch panels in key movement zones improve flexibility and comfort in the cockpit. Built Specifically For Women Racing Drivers Unlike many race suits that simply resize a standard men’s pattern, the Sabelt Hero Superlight Women's TS-10 is tailored for a women-specific fit. The suit is shaped for comfort while seated in a race car, helping reduce bunching, restriction, and driver fatigue. Pre-curved sleeves help maintain a natural driving position, while elastic stretch panels around the elbows, knees, and lumbar area provide added movement and ventilation during long sessions. The lower-profile collar helps reduce restriction around the neck, making the suit more comfortable during extended track time. Lightweight Multi-Layer Nomex Protection The TS-10 uses a three-layer fire-resistant construction designed to balance protection, comfort, and weight savings. The outer layer is made from an extremely light woven flame-resistant material, while the soft Nomex inner layer adds comfort against the body. A honeycomb middle layer provides insulation without adding unnecessary bulk. For maximum lightness, this women’s racing suit does not use a waist belt. Instead, the clean slim-fitting design eliminates excess seams and unnecessary material. Even the accent stripes are printed to help save weight. Sabelt Hero Superlight Women's TS-10 Details FIA 8856-2018 approved Women-specific driver race suit fit Lightweight 265 g/m² fabric construction Multi-layer fireproof Nomex materials Soft knit Nomex inner layer for comfort Honeycomb middle layer for insulation Breathable and ergonomic construction Stretch panels for comfort and mobility Full floating sleeves Anti-bunching pre-curved arms Lower-profile collar for reduced restriction Front cellphone pocket No waist belt for reduced weight Black knit wrist and ankle cuffs Printed Sabelt logo details Available in multiple color options Why Choose The Sabelt Hero Superlight Women's TS-10? The Sabelt Hero Superlight Women's TS-10 Race Suit is ideal for women drivers who want a lightweight FIA-approved suit without sacrificing comfort or professional protection. Its low weight, slim fit, stretch panels, and women-specific tailoring make it a strong choice for club racing, endurance racing, HPDE competition, and serious motorsport use. With its clean design and premium Sabelt construction, the TS-10 delivers the comfort and mobility drivers need while maintaining the safety standards required for modern racing. Sabelt Women's Race Suit Sizing Proper race suit sizing is important for both comfort and safety. The Sabelt Hero Superlight Women's TS-10 is designed with a women-specific fit, so use the Sabelt women’s size chart when selecting your size. Frequently Asked Questions Q: Is the Sabelt Hero Superlight Women's TS-10 FIA approved?A: Yes. The Sabelt Hero Superlight Women's TS-10 Driver Race Suit is FIA 8856-2018 approved for motorsport use. Q: Is this race suit made specifically for women?A: Yes. The TS-10 is tailored with a women-specific fit instead of using a resized men’s suit pattern. Q: How lightweight is the Sabelt Hero Superlight TS-10?A: The suit uses lightweight 265 g/m² fabric construction, making it one of Sabelt’s lighter professional-level women’s race suits. Q: Does the TS-10 have a waist belt?A: No. The Sabelt Hero Superlight Women's TS-10 does not use a waist belt in order to reduce weight and keep the suit slim and clean. Q: What materials are used in this suit?A: The TS-10 uses multi-layer fireproof Nomex materials, including a light woven outer layer, honeycomb insulation layer, and soft knit Nomex inner layer. Q: Is this suit comfortable for long races?A: Yes. Stretch panels, pre-curved arms, breathable construction, and a lower-profile collar help improve comfort during long sessions. Q: What colors are available?A: The Sabelt Hero Superlight Women's TS-10 is available in multiple color options, including pink, black, and white versions. Sabelt Women's Race Suit Sizing: