Club Benefits

Lifeline Zero 2020 FIA 3.0ltr Fire Marshal Mechanical System Designed for sedan racers, the Lifeline Zero 2020 Fire Marshall Fire System is mechanically actuated, has a 3.0 Liter capacity, two pull cables and 5 nozzles for coverage and FIA list 16 compliant, so you are legal for WRL, ChampCar, NASA, SRO, SCCA, PCA, BMWCCA, and more.  Lifeline Zero 2020 FIA 3.0ltr Fire Marshal Mechanical System Details: Manufacturer: Lifeline Manufacturer part number: LL-106-001-011 Bottle material: Steel Lifeline Zero 2020 FIA 3.0ltr Fire Marshal Mechanical System Components: 1x ready to use, filled and certified Steel 3.0L Cylinder 1x 8mm – Alloy Semi Rigid Tube – 6m Length 1x Heat Proof Overbraid – 6m 1x 2.0mtr/6ft Pull Cable – Red T Handle 1x 4.0mtr/12ft Pull Cable – Red T Handle 1x Zero 2020 Brackets & Straps 1x 8mm Bulkhead Fitting 5x Misting Nozzle 4x 8mm Equal T Connector The new Zero 2020 FIA 3ltr Fire Marshal Mechanical Fire Suppression System provides substantial coverage and performance from a revised lighter and smaller bottle. Now utilizing a water based ABF foam that delivers the fastest heat absorption and knock down capability on the market. Utilizing 3 of Lifeline’s superior misting nozzles for the engine bay and 2 for the cockpit allows for a lighter system overall and maximum protection of the driver. Lifeline Zero 2020 FIA 3.0ltr Fire Marshal Mechanical System Benefits: Smaller and lighter design than the previous Zero 2000 systems with increased levels of safety compared to competitors The fastest heat absorption and fire knock down capability available from a water based system 5 nozzle system for strategic coverage of the engine bay and cockpit reducing weight and complexity of the installation FIA Technical List 16 compliant Steel cylinder dimensions - 6.1in OD(155mm) x 13.5in Length Overall(342mm) at 11.5lbs(5.2kg) Covers a wide range of vehicles including Sports/GT cars, Formula/Prototype cars, and Rally cars Lifeline fire systems are pressurized canisters and can be only shipped ground

Stilo ST5.1 GT Carbon Fiber SA2020 Racing Helmet The Legendary Stilo Carbon Helmet Continues The ST5.1 GT Carbon is Stilo's Snell SA2020-compliant version of their best-selling carbon helmet. With an autoclave molded carbon fiber shell, the Stilo Helmets ST5.1 GT Carbon offers strength superior to fiberglass and composites while minimizing weight. With its large eyeport, the Stilo ST5.1 GT Carbon offers unsurpassed peripheral vision and all of the available tinted, mirrored, and iridium-colored visors (sold separately) have a center pinch-clip to make opening and closing easy, even while wearing nomex racing gloves. Although updated to meet the newest Snell SA2020 certification, the Stilo ST5.1 GT Carbon also retains its FIA 8858-2015 homologation. This makes the helmet legal for nearly all road race usage (except for those sanctioning bodies requiring FIA 8860 homologation). Stilo Helmets Legendary Integrated Flexibility The Stilo Helmets ST5.1 GT Carbon is unsurpassed in built-in flexibility. Its two side ports can be fitted separately with integrated communication electronics, forced air, helmet eject system, or a driver hydration system. Thanks to its innovative shell design, mounting and routing these options into the ST5.1 GT is sleek and seamless. Whether you're using side-mounted communications, side air, or a built-in hydration kit for staying hydrated during long enduro stints, everything is neat, tidy and completely out of the way when not needed. Stilo simply offers the best-designed modular racing helmet on the market. Industry-standard M6 threaded receivers are molded into the helmet shell to accommodate anchors for your head-and-neck restraint. Stilo Sizing Note: We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly. Stilo Helmets ST5.1 GT Carbon Fiber Helmet Details: Manufacturer: Stilo Helmets Manufacturer part number: AA0700AF1T Homologation: FIA 8858-2015 Certification: Snell SA2020 Compatible shields: Stilo ST5 and ST5.1 helmet shields Integrated side ports for adding communications, forced air, or hydration Noise-attenuating earmuffs included Other Versions of the Stilo ST5.1 Racing Helmet: Stilo Helmets ST5.1 GT Composite Helmet Stilo Helmets ST5 GT ZERO 8860-2018 Carbon Helmet Measuring Your Head The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Bell SE07 3mm Helmet Shields (Fits RS7,HP7) Bell Racing SE07 3mm Helmet Shield Fits: Bell RS7 Bell HP7 Bell Racing Helmets SE07 helmet shields are specifically designed for the Bell RS7 and HP7 helmets. These 3mm injection-molded optically correct polycarbonate face shield with Double Screen Anti-Fog (DSAF) insert for superior fog control. The SE07 shield uses the SV (SE07) pivot kit, is compatible with tear offs, and is available in a variety of tint colors. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) Bell SE07 Helmet Shield Available Tint Colors: Clear Light Smoke Dark Smoke Yellow Silver Mirror Blue Mirror Rainbow Iridium Mirror Multi-Layer Blue Multi-Layer Red

Competition Motorsport Racing Seat Mounting Hardware Kit Complete Mounting Kit Includes: Four (4) 8x1.25 25mm Bolts Four (4) 8x1.25 20mm Bolts Four (4) 8x1.25 Locking Nuts Eight (8) Washers (Sparco Part Numbers 50001 and 50002, everything you need in one place.)

Molecule Helmet Care Kit This specially-bundled kit from Competition Motorsport makes it easy and safe to keep your racing helmet in top condition, clean and fresh. The light-duty Cleaner & Polish spray is designed to keep your helmet exterior shell clean, shiny and protected. Safe to use on all finishes, including flat and matte. Refresher spray keeps the inside of your helmet clean, while Anti-Fog helps to keep the inside of your visor clear. Rain Repel is excellent at keeping the outside of your visor clear and making it easy to clean off debris, bugs, etc. MOLECULE DETAILER is designed to keep exterior of helmets clean and maintain a low luster finish in a simple application. Cleans and restores Gloss Finishes in an easy applicationSafely removes bugs, oils, dirt & grimeRecommended for use on all matte style finishes MOLECULE HELMET REFRESH is a lightly scented spray specifically formulated to deodorize interior of helmets. Cosmetic-grade formula containing benzalkonium chloride (BKC) sanitizing ingredient, HELMET REFRESH keeps the interior padding, foam and helmet lining clear of odors. Cleans & deodorizes helmet liningsProprietary odor eliminating technologyCosmetic grade, skin-friendly and sanitizing ingredientsIncludes FDA compliant antimicrobial – BKC >MOLECULE ANTI-FOG improves visibility and is designed specifically to inhibit fog causing moisture on the interior of shields. Apply to the inside surface of visors, goggles or wind screens to guard against distortion. Reduces fogging & improves visibilityCleans surface of dirt & chemicalsRecommended for helmet visors, goggles and wind screens MOLECULE VISOR CLEANER RAIN REPEL safely cleans helmet exterior visors while improving visibility in wet weather. Easy to apply formula, also repels rain and other liquids from sticking to the visor. For use on visors, goggles and wind screens. MOLECULE HELMET CARE KIT INCLUDES: (1) Helmet CLEANER & POLISH 4 oz. (1) Helmet REFRESHER 4 oz. (1) Helmet RAIN REPEL 4 oz. (1) Helmet ANTI-FOG 4 oz. SKU: MLHCK-4-4

Simpson Hybrid S 3-Point Head and Neck Restraint The Hybrid S Head Restraint is FIA and SFI approved (when worn with a multi-point harness system) and is tested and shown to be compatible with 3-point harnesses used by Car Club enthusiasts and High Performance Driving Experiences. This allows Driving Instructors, Auto Manufacturing Test Engineers, and others in cars with 3-point harnesses to have added protection. We are pleased to offer this great option for increased protection to this sector of the market. Bear in mind, however, that on a racetrack the best protection we believe is a Full-Containment Cockpit System that includes a full containment seat, Snell SA2015 or FIA 8860 rated helmet, FIA or SFI approved head restraint, and 6- or 7-point racing harness system. SIMPSON HYBRID S 3-P0INT HNR  OPTIONS: Select your size based on the size chart Competition Motorsport only carries this device with standard HANS post anchor clips as they're lightweight and easy to attach/detach SIMPSON HYBRID S 3-P0INT HNR FEATURES: FIA and SFI Approved with 5-, 6- and 7-point harness systems FMVSS Tested for use with 3-point OEM belt system High quality carbon fiber construction Low profile, no high back to hook on the roll bars, etc. in emergency exit Multiple load paths to dissipate head loads Buckle attachment in front, no bulky straps underneath SIMPSON HYBRID S 3-P0INT HNR  INSTALLATION: To use a Hybrid S with a 3-point seat belt system, the SAS (Seatbelt Anchoring System) is not used. (The SAS strap anchor loops hook into the buckle of a 5-, 6- or 7-point racing harness.) Have the wearer put on the Hybrid S and get into the driver's seat. Follow the instructions on fitting the device to the wearer. Engage the 3-point seat belt and sit in the normal driving position. Have a helper apply gentle pressure to the top of the device, keeping the device stable during tether adjustment. The device should be in a comfortable position behind the driver’s back, against the seat cushion. With the helper holding the device and the driver looking straight forward, hold the triangulated tether up to the anchors on the driver’s helmet. Adjust the side tethers so that the end fitting can be easily inserted into the helmet anchor without pulling down on the helmet. A comfortable adjustment on the side tether is to have about ¼” of slack in the tethers. With the helper still holding the device down and the driver looking straight ahead, adjust the rear tethers so that there is ½” to 1” of slack. Test the amount of head movement by moving the head straight forward. The driver should have 1” to 2” of forward head movement before the slack is taken out of the tether. Remember when checking this not to rotate the head down; translate it straight forward. This should allow for plenty of head movement on track. AIRBAG USE WITH HYBRID S: DO NOT unhook or disable the airbag system installed by the auto manufacturer or their authorized installer. Outside experts in Detroit have confirmed this and require their test engineers to use the Hybrid S in conjunction with the airbag in a 3-point system. Simpson agrees that the airbag and Hybrid S work together to increase protection in frontal crashes.

Trac-Com Boom Mic: The Ultimate Solution for Racing Intercoms Introducing the Trac-Com Portable Boom Mic/Speaker Headset, the answer to years of frustration with person-to-person racing intercom systems. This state-of-the-art intercom system is designed from the ground up to offer superior sound and reliability. Made and tested in the USA, the Trac-Com is the best solution for racing intercoms and driver to passenger communications. The portable boom mic/speaker headset is a flexible solution for driver-passenger communication. It is designed to provide crystal clear sound and is compatible with various communicator systems. You can choose your 4ft cable with a NASCAR, IMSA, Stilo, Chatterbox, or Trac-Com connector plug to work seamlessly with your existing system. Say goodbye to frustrating intercom systems and hello to the Trac-Com Boom Mic. Experience the ultimate in driver-passenger communication and take your racing experience to the next level. Get your Trac-Com Boom Mic today and enjoy the best in sound and reliability.

CMS Performance Bolt-In Roll Bar For Porsche 981 & 718 Cayman This Roll Bar Fits The Following Cars: 2014-16 (981) Cayman Base, S, GTS, GT4 2017+ (718) Cayman Base, S, GTS, GT4 Hands Down the Best Roll Bar for the Porsche Cayman The CMS Performance Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market for your Cayman. In designing our roll bar, safety and structural rigidity were our primary goals. That's why we use 1.75 x .095" Docol R8 Advanced High-Strength Steel tubing, much stronger than the smaller-diameter 4130 CrMo tubing others use. The harness cross-bar is designed to put your harness shoulder straps at the proper angle (0° to -20°) and distance to the driver, regardless of your seat position. Yet the CMS roll bar requires no cutting through the carpeted hump in the middle of your interior (replacing this carpet is expensive if you ever want to return your car to stock). This also provides an ideal mount for a SmartyCam video camera. Unsurpassed Design and Meticulous American-Made Craftsmanship Our use of Docol R8 tubing throughout also lets us keep the driver's rear view unobstructed by the rear diagonal bracing typically used to support weaker roll bars. This also gives you unfettered access to the engine cover without removing any part of your roll bar. Other roll bars require partial removal to get at your engine -- not ideal in a car that sees track time. The CMS Performance Roll Bart for the Porsche Cayman features rear kickers bolted to the Cayman's rear shock towers, the safest, strongest possible mounting points. This mounting also adds rigidity to the chassis and suspension for improved handling. The main roll hoop is mounted to the frame structure across the rear bulkhead for lighter weight and superior strength. The Only Roll Bar Color-Matched to Your Porsche CMS Performance has perfected the process of powder coating each roll bar in a color custom-matched to Porsche's OEM color palette. This gives your Cayman roll bar a truly unique, from-the-factory look. We also offer technical powder coat finishes like the amazing-looking Superchrome! Or you can go with a rich satin black for a more stealthy, low-key installation. Every CMS roll bar is professionally powder-coated to order in-house. Fully TIG welded by master welders using superior materials, the design, strength, fit, and finish of the CMS roll bar all add up to this: you can spend more on a roll bar, but you only get the best from CMS. Add Premium Porsche-Specific Harnesses for Added Safety Up the track-day safety factor with six-point Schroth Enduro 2x2 GT4, Schroth Flexi 2x2 GT4, or Sabelt Silver Series GT4 harnesses specially designed for your Porsche. Or for a more convenient installation, four-point Schroth Profi II ASM GT4 or Sabelt Porsche GT4 harnesses can be added to your order using our convenient pull-down menus above! All of these harnesses are specifically designed to bolt right directly to your Porsche lightweight carbon bucket seats. (Some Porsche passenger seats do not have a factory sub-strap pass throughs.) If you're installing six-point harnesses in your Porsche, we strongly recommend adding the CMS Performance Sub Strap Mount to your order. Custom-made from solid steel, these provide a strong, properly located anchor for your anti-submarine straps and are easy to install alongside your roll bar. Click Here for Installation Instructions CMS Performance Porsche Cayman Roll Bar Details Materials: main hoop and kickers 1.75 x .095" Docol R8 Advanced High-Strength Steel Construction: fully TIG welded Design: One-piece main hoop and three-piece rear kickers for ease of installation Design features: Easy engine access without removing any part of the roll bar; no cutting through the middle of your expensive carpet; CNC cut mounting plates; CNC machined interlocking roll bar clamps Designed, built, and finished in the USA by CMS Performance Easy to install and perfect fitment guaranteed Detailed installation instructions and all necessary hardware Porsche Cayman Roll Bar Options Pre-cut OEM Porsche interior trim for easier installation, preserving your original trim CMS Performance Sub Strap Mount for six-point harness installation This product is intended for off-road race track use only.

Sparco K-Pole Kart Racing Shoe The Sparco K-Pole karting shoe was specifically designed for durability while offering the highest levels of comfort and performance in the kart. Distinctly designed, the K-Pole features a breathable, perforated matte-printed upper with a two-tone contrasting design. For greater grip and pedal sensitivity, the K-Pole has an anatomic inner sole with a low back, allowing the heel to move freely while karting. An all-new ultralight outer sole is anti-slip, anti-static, and oil-resistant.   SPARCO K-POLE KART RACING SHOE TECHNOLOGY Matte printed upper with breathable perforations Anatomic inner sole for comfort New high-grip outer sole

MOLECULE NOMEX GARMENT WASH Molecule Nomex Garment Wash safely and effectively cleans racing garments using technical fabrics like Nomex, in standard washing machines. Ordinary laundry detergent can leave residues on Nomex clothing that reduces their flame-retardant and thermal isolation properties. Molecule is specifically formulated to remove soil and contaminants that can degrade Nomex fabric's performance, along with odor-causing bacteria. MOLECULE NOMEX GARMENT WASH FEATURES: Concentrated formula effectively cleans technical fabrics in standard washing machines Recommended for technical fabrics, including Nomex Removes contaminants that can degrade fabric performance More cost effective and safer than dry-cleaning Contains a fabric brightener to help you look your best Maintains fabric breathability Up to eight washes per bottle sku: MLWA-16-6

Bell SE03 Helmet Shields Bell SE03 Double Screen Anti-Fog (DSAF) helmet shields are specifically designed for the SA2015 Bell GP.3 and GTX.3 helmets (including carbon fiber models), and the SA2010 Bell HP3 Carbon Helmet. The Double Screen Anti-Fog treatment features variable thickness that exceeds 5mm in the field of vision for excellent clarity and fog-control. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) Bell SE03 Shield Tints & Colors: Clear Amber Yellow Light Smoke Dark Smoke Blue Chrome Silver Chrome Gold Chrome Red Chrome Rainbow Mirror  Multilayer Red Multilayer Blue Multilayer Green

RAM Windshield Suction Mount Among the great advantages to the AiM Solo family of GPS lap timers is that, unlike other timers, you don't have to connect any wires to use it. That makes it ideal for use in daily-driven track-day cars (or for moving from one car to another). The RAM windshield mount lets you to mount your AiM Solo2 or Solo2 DL (and older Solo versions) to your windshield quickly and securely. Installation is as easy as pushing a lever; removal is as easy as lifting the lever. Two pivoting ball joints allow a wide range of adjustment. Two 6mm screw holes match the holes in the standard mounting plate included with your AiM Solo2 or Solo2 DL. There's no better, more convenient way to mount your AiM Solo2 / Solo2 DL.

Alpinestars Tech-1 T v3 Racing Shoes The redesigned Alpinestars Tech-1 T v3 offers drivers optimum levels of comfort, fit and feel in an SFI 3.3/5 homologated shoe at an intermediate price point. Featuring leather and suede construction with a suede collar, the shoe boasts a cut away section at the heel for more freedom of movement while operating the pedals with no pressure points while driving. Every aspect of the shoe has been carefully considered to keep weight as low as possible. The velcro strap is a single layer for added lightness, while also ensuring there is no pressure point on the instep, and the classic lace closure system features hidden loops on the lateral and medial to guarantee a snug but unrestrictive fit. The all-new rubber sole, which mimics an asymmetric tire tread, is water repelling and oil resistant to offer high levels of grip and thicker for enhanced levels of comfort in and out of the car, while the mid sole offers reassuring levels of cushioning. Other premium touches include an outer toe protector for comfort and durability, and a Nomex lining to protect the entire foot against heat. ALPINESTARS TECH 1-T RACE SHOE KEY FEATURES Complies with SFI 3.3/5 homologation standards Strategically positioned perforation zones for enhanced cooling performance and maximized airflow Dual closure system incorporates adjustable hook and loop strap plus traditional lacing and a hidden loop system for a personalized fit and secure closure Para-aramidic fiber tubular lining construction for excellent heat-resistance, weight saving and reduced seams Tongue features perforated soft tongue padding for comfort and improved fit Collar is cut lower at the rear to allow for greater Achilles’ heel comfort and improved range of movement The outsole also features a toe protector for enhanced durability and abrasion resistance Features a multi-compound construction and ergonomic polypropylene heel counter plus integrated insole, which provides support, protection and stability Dedicated lateral toe protection SFI Alpinestars label on the tongue made from fireproof PU film transfer   ALPINESTARS TECH 1-T RACE SHOE CONSTRUCTION Fireproof PU midsole for comfort New lightweight rubber compound sole with new textured grip and improved pedal feel Main upper constructed from durable, full grain leather with suede for optimized levels of durability, comfort and abrasion resistance Collar padding constructed from nitrile rubber specifically blended for high resistance to oil while providing good feel and flexibility   ALPINESTARS TECH 1-T RACE SHOE HOMOLOGATION certified to the SFI 3.3/5 standard.   Manufacturer Part Number: 2710122-1055 (Black/Cool Gray/Yellow) 2710122-119 (Black/Silver) 2710122-21 (White/Black) 2710122-213 (White/Black/Red) 2710122-312 (Red/Black/White) 2710122-7912 (Lite Blue/Black/White)

Sparco Thunder Kart Racing Suit The Sparco Thunder 2020 karting suit offers the ultimate balance of performance and value. Made from abrasion-resistant fabric and lined with Sparco’s well-known soft cotton terry, the Thunder is both durable and comfortable. To dissipate heat and cool the body temperature, the Thunder has internal thigh and underarm vents. The Thunder features half-floating sleeves and strategically placed stretch panel and elastic for increased mobility. This stylish two tone suit includes contrast accents and Sparco signature epaulettes. The Sparco Thunder is CIK-FIA 2013-1 approved. TECHNOLOGY Pre-curved arms Full floating sleeves Back stretch panel Internal leg and underarm vents for breathability CIK-FIA 2013-1 approved

Alpinestars Race v3 Nomex Balaclava This Formula 1 specification balaclava is extremely lightweight and thin, while being incredibly soft to the touch for greatly enhanced comfort when wearing a driving suit. ALPINESTARS RACE V3 NOMEX BALACLAVA KEY FEATURES Flat seams construction to reduce pressure points and improve strength. Mouth opening for hydration tube access. ALPINESTARS RACE V3 NOMEX BALACLAVA CONSTRUCTION Advanced tech base layer with Alpinestars innovative flame-resistant technology incorporating elastane fiber for improved engineered elasticity and high levels of comfort. Stretchable construction under the new homologation standard requirements. Soft-touch textile for feel and enhanced comfort. ALPINESTARS RACE V3 NOMEX BALACLAVA PROTECTION Certified to the new FIA 8856-2018 homologation standard. Lenzing FR® material is a natural viscose fiber with unique thermal insulation and flame resistance properties that help prevent heat stress.