12 DAYS OF CHRISTMAS SALE

Stilo Helmets ST5 GT 8860-2018 Carbon Fiber Racing Helmet FIA 8860 Certification valid thru 2032 for these ST5 GT 8860 Carbon Fiber Helmets The Stilo ST5 GT 8860-2018 Carbon Fiber Racing Helmet is one of Stilo's most iconic and versatile closed-face racing helmets. Crafted from a carbon fiber layup and certified to the demanding FIA 8860-2018 standard, the ST5 GT is designed for drivers competing across a wide range of professional and high-level motorsports. Building on the successful ST4 helmet platform, the ST5 GT introduces a larger eyeport, improved interior fit system, integrated accessory ports, and extensive compatibility with communications, hydration, and forced-air systems. Lightweight Carbon Fiber Construction The Stilo ST5 GT uses a lightweight carbon fiber shell designed to provide exceptional protection while reducing unnecessary weight on the driver's head and neck. Small shell weight: approximately 3.13 lbs Large shell weight: approximately 3.39 lbs Two dedicated shell sizes for improved fit and reduced weight Using separate small and large shell configurations allows Stilo to create a more proportional helmet rather than relying on excessive interior padding to accommodate different head sizes. FIA 8860-2018 Certified Protection The ST5 GT Carbon is FIA 8860-2018 certified, making it suitable for a wide variety of high-level motorsport applications where advanced FIA helmet certification is required. The FIA 8860 standard is designed for professional competition and represents one of the most demanding helmet standards used in motorsports. Integrated Side Accessory Ports One of the defining features of the Stilo ST5 GT is the integrated side-port system located on both sides of the helmet. These ports allow drivers to configure the helmet around their specific racing requirements while keeping accessories neatly integrated into the helmet. Compatible systems and accessories include: Integrated communication systems Forced-air systems Hydration and drink systems Combined communications, air, and hydration configurations Stilo designed these systems to integrate seamlessly with the ST5 platform, making the ST5 GT one of the most customizable racing helmets available. Larger Eyeport and 3mm Anti-Fog Visor Compared with the earlier ST4 helmet platform, the ST5 features a larger eyeport designed to open beyond the driver's normal line of sight for improved visibility inside the cockpit. The helmet comes standard with a 3mm clear visor featuring Stilo's anti-fog coating. A variety of additional visor options are also available separately, allowing drivers to configure the helmet for different lighting and racing conditions. Removable Interior Padding Stilo improved the ST5 interior with removable cheek pads and removable top padding, allowing drivers to fine-tune the fit of the helmet. The helmet also comes standard with removable earmuff cushions designed to isolate the ears and create a significantly quieter environment inside the helmet. This is particularly beneficial for drivers using integrated communications or competing in loud closed-cockpit race cars. Designed for Communications, Air and Hydration The ST5 GT is designed from the outset to accommodate multiple driver-support systems without requiring a collection of externally mounted components. The helmet can be configured for: Integrated electronics Driver communications Air supply Hydration systems Multiple systems used together This versatility makes the ST5 GT particularly well suited to GT racing, endurance racing, touring cars, and other closed-cockpit motorsports. Stilo ST5 GT 8860-2018 Carbon Helmet Features FIA 8860-2018 certified Carbon fiber shell construction Approximately 3.13 lbs in the small shell Approximately 3.39 lbs in the large shell Two separate shell sizes for improved fit and reduced weight Integrated side accessory ports Ready for integrated electronic communication systems Compatible with forced-air systems Compatible with hydration and drink systems Communications, air, and hydration systems can be combined Larger eyeport compared with the ST4 platform 3mm clear visor included Anti-fog visor coating Removable cheek pads Removable top padding Removable earmuff cushions for improved noise isolation HANS posts included Additional aero accessories available Top-air kits available separately Multiple visor options available separately Built for Professional Motorsport The Stilo ST5 GT Carbon combines advanced FIA protection with lightweight carbon construction and one of the most adaptable accessory systems available in a racing helmet. Its combination of integrated communications capability, forced-air compatibility, hydration support, improved visibility, customizable interior padding, and FIA 8860-2018 certification makes it an excellent choice for drivers who need a professional-level helmet that can be configured around their race car and competition environment. Stilo ST5 GT 8860-2018 Carbon Fiber Helmet Sizing Chart For the most accurate fit, measure around the largest part of your head approximately one inch above your eyebrows and around the widest point at the back of your head. Take the measurement several times and use the largest result when selecting your helmet size. View our Auto Racing Helmet Buyer's Guide for additional helmet sizing and fit information. Stilo ST5 GT 8860-2018 FAQs What certification does the Stilo ST5 GT Carbon have?The Stilo ST5 GT Carbon is FIA 8860-2018 certified. How much does the Stilo ST5 GT Carbon weigh?The small shell weighs approximately 3.13 lbs, while the large shell weighs approximately 3.39 lbs. Is the Stilo ST5 GT made from carbon fiber?Yes. The helmet is constructed using a carbon fiber layup designed to provide high-level protection while minimizing helmet weight. Does the Stilo ST5 GT include a visor?Yes. It comes standard with a 3mm clear visor featuring an anti-fog coating. Can communications be installed in the ST5 GT?Yes. The integrated side ports are designed to accommodate compatible Stilo electronic communication systems. Can the ST5 GT use a forced-air system?Yes. The helmet is designed to accept compatible air-supply systems and optional top-air kits. Can I use a hydration system with the ST5 GT?Yes. Compatible drink and hydration systems can be integrated into the helmet. Can communications, air, and hydration be used together?Yes. The ST5 GT is designed so integrated electronics, air supply, and hydration systems can be used individually or in combination. Are the interior pads removable?Yes. The cheek pads and top pads are removable, allowing drivers to better customize the helmet fit. Does the ST5 GT include HANS posts?Yes. HANS posts are included with the helmet.    

Alpinestars Tech-1 Start v3 Nomex Racing Gloves The Alpinestars Tech-1 Start v3 Nomex Gloves are engineered to provide lightweight protection, precise steering-wheel control, and lasting comfort for competitive auto racing. Designed with a single upper panel and an innovative finger construction, these racing gloves reduce excess material throughout the fingers while lowering the overall weight of the glove. The streamlined design creates a close, anatomically optimized fit that is especially beneficial inside confined racing cockpits. Drivers receive improved freedom of movement, reduced bulk, and a more direct connection with the steering wheel and vehicle controls. Lightweight Single-Panel Construction The single-panel upper construction minimizes unnecessary seams and material across the glove. This helps improve flexibility and reduces potential pressure points during long races, qualifying sessions, and track days. By reducing excess fabric in the fingers, the Tech-1 Start v3 offers a more precise fit and improved dexterity without sacrificing the protection required for motorsport competition. Innovative Finger Design Box-cut fingertip construction provides a comfortable and natural finger position while helping reduce material buildup near the fingertips. The middle and ring fingers use a seamless, no-fourchette design that eliminates the traditional fabric panels between the fingers. This construction creates a less restrictive feel and allows the glove to conform more closely to the driver’s hand. The reduced bulk is particularly useful when operating steering-wheel buttons, switches, paddles, and other controls inside compact racing cockpits. Silicone Palm Grip Ergonomically positioned silicone-printed zones across the palm provide enhanced grip on the steering wheel. The strategically placed silicone helps reduce unwanted hand movement and allows the driver to maintain control without applying excessive gripping pressure. The improved grip can help reduce hand fatigue while providing a more consistent steering feel during demanding driving conditions. Extended Elasticated Cuff The close-fitting, straight cuff extends beyond the wrist to provide dependable coverage between the gloves and racing suit. An elasticated wrist allows for easy entry while helping keep the glove securely positioned once fitted. The streamlined cuff design also reduces unnecessary bulk around the wrist and fits comfortably beneath or over the cuff of a compatible racing suit. FIA and SFI-Certified Racing Protection The Alpinestars Tech-1 Start v3 Gloves are certified to FIA 8856-2018 and SFI 3.3/5 standards for use in sanctioned motorsport competition. These certifications make the gloves suitable for many professional, club-level, endurance, road-racing, and grassroots motorsport applications. Always confirm the required safety standard with your racing organization or sanctioning body before competition. Alpinestars Tech-1 Start v3 Nomex Glove Features Lightweight Nomex auto-racing glove construction Single upper panel reduces seams and overall weight Innovative finger construction reduces excess material Box-cut fingertip design for improved comfort and fit Seamless no-fourchette construction on the middle and ring fingers Anatomically optimized for confined racing cockpits Ergonomically positioned silicone palm grip zones Enhanced steering-wheel grip and control Close-fitting straight extended cuff Elasticated wrist for easy entry and a secure fit Designed to improve dexterity and reduce hand fatigue FIA 8856-2018 certified SFI 3.3/5 certified Ideal for Multiple Racing Applications The Tech-1 Start v3 is an excellent choice for drivers who need certified protection without the weight and bulk of a heavier racing glove. Its close-fitting design and silicone palm grip make it suitable for road racing, autocross, time trials, endurance racing, track days, and other forms of competitive motorsport. Why Choose the Alpinestars Tech-1 Start v3 Gloves? These gloves combine certified fire-resistant protection with a lightweight, driver-focused construction. The reduced-material finger design improves comfort and dexterity, while the silicone palm zones provide the grip needed for accurate steering input. For drivers seeking an affordable Alpinestars racing glove with FIA and SFI certification, the Tech-1 Start v3 delivers a strong balance of protection, comfort, and control. Alpinestars Tech-1 Start v3 Nomex Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 Start v3 Gloves fire resistant?Yes. These gloves are designed for auto racing and use fire-resistant materials appropriate for certified motorsport competition. What certifications do the Tech-1 Start v3 Gloves have?They are certified to FIA 8856-2018 and SFI 3.3/5 standards. What is a no-fourchette finger design?A no-fourchette design removes the traditional material panels between selected fingers. This reduces bulk and creates a closer, more anatomically optimized fit. Do these gloves have silicone on the palm?Yes. Ergonomically positioned silicone-printed zones provide enhanced grip on the steering wheel. Are these gloves suitable for kart racing?They are designed as fire-resistant auto-racing gloves. Karting organizations may use different certification requirements, so drivers should confirm the rules for their specific series. How should Alpinestars racing gloves fit?They should fit closely without restricting movement or causing uncomfortable pressure at the fingertips. A secure fit helps preserve steering feel and control.

Sparco X-Light Racing Shoes The Sparco X-Light Racing Shoes combine lightweight construction, premium comfort, and responsive pedal control for competitive auto racing. Developed using feedback from Sparco professional drivers, the X-Light incorporates flexible materials and advanced racing-shoe technology to improve fit, breathability, and mobility behind the wheel. An ultra-soft calfskin leather upper provides a comfortable and supportive fit, while strategically positioned perforations promote airflow throughout the shoe. The mid-cut profile provides additional ankle coverage without limiting the flexibility needed for braking, shifting, and throttle operation. Instead of a conventional racing-shoe tongue, the X-Light uses a stretch jacquard fabric panel that conforms to the top of the foot. A matching jacquard insert at the rear allows the Achilles area to move naturally, helping reduce pressure and restriction during long sessions in the cockpit. Ultra-Soft Calfskin Leather Upper The premium calfskin leather upper provides an excellent balance of flexibility, durability, and comfort. Its soft construction allows the shoe to conform closely to the foot while maintaining the support required for precise pedal operation. Stretch Jacquard Tongue Panel A flexible jacquard fabric panel replaces the traditional padded tongue. This lightweight construction stretches across the top of the foot for a close, comfortable fit while improving ventilation and reducing unnecessary bulk. Flexible Achilles Panel A jacquard stretch insert at the rear of the shoe supports unrestricted Achilles movement. This flexible panel allows the ankle to move naturally while braking, shifting, and transitioning between pedals. Perforated Mid-Cut Construction Strategically positioned ventilation perforations help circulate air around the foot. The breathable construction improves comfort during sprint races, endurance events, qualifying sessions, and extended track use. Responsive Lightweight Outsole The Sparco X-Light uses a next-generation outsole made from lightweight pure rubber. Its streamlined design provides direct feedback through the brake, throttle, and clutch pedals while maintaining dependable grip. Anti-Static and Fluid-Resistant Sole The rubber outsole is anti-static and resistant to fuel and oil, making it suitable for demanding racing and paddock environments. The thin construction maintains pedal sensitivity without sacrificing essential durability. Pre-Formed Cushioned Insole A pre-formed cushioned insole supports the natural shape of the foot and helps reduce pressure during long driving sessions. The contoured design improves comfort while maintaining the close fit expected from a professional racing shoe. Versatile Lacing Options The Sparco X-Light includes both speed laces and traditional laces. Drivers can select the closure style that provides their preferred combination of convenience, adjustment, and support. Sparco X-Light Racing Shoe Features Lightweight professional auto racing shoe Developed using feedback from Sparco professional drivers Ultra-soft calfskin leather upper Comfortable mid-cut racing design Stretch jacquard tongue panel Flexible rear Achilles stretch insert Strategically positioned ventilation perforations Pre-formed cushioned insole Next-generation lightweight pure-rubber outsole Excellent pedal sensitivity and feedback Anti-static sole construction Fuel-resistant outsole Oil-resistant outsole Speed laces included Traditional laces included FIA 8856-2018 homologated Technical Specifications Product: Sparco X-Light Racing Shoes Manufacturer: Sparco Upper Material: Ultra-soft calfskin leather Design: Mid-cut racing shoe Upper Panel: Stretch jacquard fabric Rear Panel: Flexible Achilles stretch insert Ventilation: Perforated upper Insole: Pre-formed cushioned construction Outsole: Lightweight pure rubber Sole Properties: Anti-static, fuel resistant, and oil resistant Laces: Speed laces and traditional laces included Certification: FIA 8856-2018 European Sizes: 37–48 Available Colors: White/Red, Blue/White, Gray/Orange, and Black Sparco X-Light Racing Shoes Sizing Chart Frequently Asked Questions Are the Sparco X-Light Racing Shoes FIA approved? Yes. The Sparco X-Light Racing Shoes are homologated to the FIA 8856-2018 standard. Drivers should confirm the current footwear requirements for their racing organization, class, and event. What are the Sparco X-Light Racing Shoes made from? The upper is constructed from ultra-soft calfskin leather with flexible jacquard fabric inserts at the tongue and Achilles area. What is the benefit of the jacquard tongue panel? The stretch jacquard panel conforms to the top of the foot while reducing bulk and improving ventilation. It provides a flexible, sock-like feel compared with a conventional padded tongue. Does the Sparco X-Light provide good ankle mobility? Yes. The flexible jacquard panel behind the ankle allows the Achilles area to move naturally during braking, shifting, and throttle operation. Do the Sparco X-Light Racing Shoes provide good pedal feel? Yes. The lightweight pure-rubber outsole is designed to provide direct feedback through the pedals while maintaining dependable grip. Are the soles resistant to fuel and oil? Yes. The outsole is resistant to fuel and oil and also features anti-static properties. Do the shoes include both types of laces? Yes. The Sparco X-Light includes speed laces and traditional laces so the driver can choose the preferred closure style. Are these shoes suitable for HPDE and track-day driving? Yes. Their comfortable fit, responsive sole, ventilation, and FIA-approved construction make them suitable for professional competition, club racing, autocross, time trials, HPDE events, and track days. How should the Sparco X-Light Racing Shoes fit? Racing shoes should fit securely without painful pressure points or restricted circulation. The heel should remain stable, and the toes should have enough room to rest naturally while wearing racing socks. How should I care for the Sparco X-Light Racing Shoes? Allow the shoes to air dry naturally after use and keep them away from direct heat. Clean the leather with an appropriate leather-care product and avoid unnecessary walking on gravel, rough pavement, or other abrasive surfaces. Lightweight Comfort and Responsive Pedal Control The Sparco X-Light Racing Shoes deliver the premium materials, flexible fit, ventilation, and direct pedal feedback demanded by serious competitors. Their calfskin leather construction, jacquard stretch panels, cushioned insole, and lightweight fluid-resistant outsole make them an excellent choice for professional racing and high-performance track driving.  

Alpinestars Tech-1 Race v3 Nomex Gloves The Alpinestars Tech-1 Race v3 Nomex Gloves deliver excellent steering feel, lightweight protection, and premium driving comfort at an accessible price. Developed with construction techniques found in higher-priced racing gloves, the Tech-1 Race v3 combines a bonded aramidic fiber shell, pre-curved fingers, strategically printed silicone grip, and a full-length protective gauntlet. A minimal-seam design helps reduce bulk and pressure points, while the open cuff and 180-degree elasticated wrist allow quick entry without sacrificing a secure fit. Certified to FIA 8856-2018, the Tech-1 Race v3 provides current fire-resistant protection for competitive motorsport. Lightweight Aramidic Fiber Construction The glove’s main structure is made from flame-resistant aramidic fiber bonded for an effective balance of protection, flexibility, and comfort. Alpinestars combines lightweight materials with carefully selected construction methods to reduce overall glove weight without compromising coverage. The lighter design allows the driver to move naturally between the steering wheel, shifter, paddle controls, and cockpit switches while helping reduce fatigue during extended sessions. Pre-Curved Fingers and Palm The Tech-1 Race v3 is shaped around the natural position of the hand while gripping a steering wheel. Pre-curved fingers and a contoured palm reduce the effort required to close the hand and help prevent material from bunching in high-contact areas. This driving-specific shape promotes a more relaxed grip, allowing the driver to maintain control without unnecessary hand tension. Comfort-Focused Finger Construction Inside-stitched seams on all five fingers create a clean exterior and support dependable durability. The carefully shaped finger construction provides a close, responsive fit while maintaining the flexibility needed for steering and cockpit operation. Minimal seam placement across the glove helps reduce unnecessary material and creates a smoother connection between the hand and steering wheel. Extended Silicone Grip Printing Silicone printing extends across the palm and fingers to improve steering-wheel traction and tactile control. The grip pattern is positioned in key contact areas to help the driver maintain a secure hold during braking, cornering, shifting, and rapid steering corrections. Because the silicone is printed directly onto the glove, it provides dependable grip without the thickness of a separate palm layer. Direct Steering Feel and Control The lightweight palm and low-profile silicone print preserve sensitivity through the steering wheel. Drivers can feel steering resistance, vibration, and changes in vehicle balance while maintaining consistent traction. This combination of grip and feedback helps reduce the need to squeeze the wheel excessively, supporting improved comfort and precision over longer runs. Single-Panel Full-Gauntlet Top A full-gauntlet single-panel upper provides streamlined coverage from the hand through the extended cuff. Reducing the number of material transitions helps lower weight and creates a clean, close-fitting profile. The extended cuff provides additional protection around the wrist and supports proper overlap with the sleeve of a compatible fire-resistant racing suit. Open Cuff with 180-Degree Elasticated Wrist Alpinestars’ open-cuff design makes the Tech-1 Race v3 quick and easy to put on between sessions. A 180-degree elasticated wrist holds the glove securely once fitted without requiring a bulky external strap. The design combines easy entry in the pits with stable retention while the driver is in the car. Reduced-Weight Printed Graphics External printed design details give the glove a distinctive Alpinestars appearance without adding the weight and stiffness associated with heavier embroidered overlays. The low-profile graphics complement the glove’s lightweight construction while maintaining a professional competition look. FIA 8856-2018 Homologated Protection The Alpinestars Tech-1 Race v3 Nomex Gloves are certified to the FIA 8856-2018 standard for protective clothing used in automobile competition. The fire-resistant aramidic construction and extended cuff meet modern requirements for heat and flame protection. Drivers should verify the homologation requirements of their specific racing organization before competition. Alpinestars Tech-1 Race v3 Glove Construction Bonded flame-resistant aramidic fiber main construction Lightweight materials reduce overall glove weight Minimal-seam design improves comfort and sensitivity Inside-stitched seams on all five fingers Pre-curved fingers and palm follow the natural driving position Full-gauntlet single-panel upper construction Extended silicone printing across the palm and fingers Low-profile printed graphics reduce added weight Alpinestars Tech-1 Race v3 Glove Features Excellent steering-wheel feel and tactile feedback Silicone palm and finger grip improves control Pre-curved construction helps reduce hand fatigue Open cuff allows easy entry and removal 180-degree elasticated wrist provides secure retention Extended cuff improves wrist and sleeve coverage Lightweight construction supports natural hand movement FIA 8856-2018 homologated Alpinestars Tech-1 Race v3 Glove Specifications Manufacturer: Alpinestars Model: Tech-1 Race v3 Product Type: Nomex Auto Racing Gloves Main Material: Flame-resistant aramidic fiber Finger Construction: Pre-curved with inside-stitched seams Palm: Extended silicone grip print Upper: Single-panel full-gauntlet construction Wrist: 180-degree elasticated design Cuff: Open extended gauntlet Homologation: FIA 8856-2018 Premium Performance Without the Premium Price The Tech-1 Race v3 offers a strong combination of advanced fit, lightweight materials, secure silicone grip, and modern FIA protection. Its pre-curved shape supports natural steering control, while the minimal-seam construction and elasticated wrist improve comfort and convenience. For drivers seeking a responsive FIA-approved glove with many of the features found in Alpinestars’ higher-level models, the Tech-1 Race v3 delivers excellent performance and value. Alpinestars Tech-1 Race v3 Nomex Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 Race v3 Gloves FIA approved?Yes. The gloves are homologated to the FIA 8856-2018 standard. What material are the gloves made from?The main construction uses bonded flame-resistant aramidic fiber for protection, comfort, and reduced weight. Do the gloves have silicone palm grip?Yes. Extended silicone printing is positioned across the palm and fingers to improve grip and steering control. How do the pre-curved fingers improve comfort?The pre-curved shape follows the natural position of the hand around the steering wheel, helping reduce resistance, bunching, and fatigue. Do the Tech-1 Race v3 Gloves have a wrist strap?No. A 180-degree elasticated wrist provides secure retention without a separate adjustment strap. What is the benefit of the open-cuff design?The open cuff makes the gloves easier to put on and remove while the elasticated wrist keeps them securely positioned during driving. Why is the cuff extended?The extended gauntlet provides additional wrist coverage and proper overlap with a compatible racing suit sleeve. How should the Tech-1 Race v3 Gloves fit?They should fit closely around the palm and fingers without restricting movement or leaving excessive material at the fingertips.

Alpinestars Race v3 Nomex Fireproof Underlayer Shirt This lightweight Nomex® undergarment gives you exceptional breathability and comfort, along with flame-resistant properties. The Race v3 Series Formula 1 specification tech base layer incorporates a relaxed fit for comfort when wearing under a driving suit. Alpinestars Race v3 Nomex Shirt Construction Advanced tech base layer with Alpinestars innovative flame-resistant technology incorporating elastane fiber for improved engineered elasticity and high levels of comfort. Stretchable construction under the new homologation standard requirements.  Alpinestars Race v3 Nomex Shirt Protection  Certified to the new FIA 8856-2018 homologation standard. Lenzing FR® fire-resistant material Alpinestars Race v3 Nomex Shirt Key Features Soft-touch textile for feel and enhanced comfort. Lenzing FR® material is a natural viscose fiber with unique thermal insulation and flame resistance properties that help prevent heat stress.

Simpson Hybrid Sport Head and Neck Restraint The Hybrid Sport from Simpson features a lightweight design using DuPont carbon/polymer construction and provides maximum comfort and maneuverability with superior strength. Simpson Hybrids come race-ready. The trusted low profile design disappears into the seat when worn and allows for easy in and out of the race car, eliminating the danger of becoming caught in other gear. The protection stays with the racer during multiple impacts, flips and rolls. Simpson Hybrid Sport HNR Details SFI 38.1 certification Available with patent pending multi-tether system to enhance side to side movement DuPont carbon polymer construction Sleek, modern profile with defined wings for seatbelt containment Select your size based on the size chart

Alpinestars Race v3 Nomex Fireproof Underlayer Pants Lightweight and offering high breathability and flame-resistance properties, the Race v3 Series Formula 1 specification tech base layer incorporates a relaxed fit for comfort when wearing under a driving suit. Alpinestars Race v3 Nomex Pants Construction Advanced tech base layer with Alpinestars innovative flame-resistant technology incorporating elastane fiber for improved engineered elasticity and high levels of comfort. Stretchable construction under the new homologation standard requirements. Alpinestars Race v3 Nomex Pants Protection Certified to the new FIA 8856-2018 homologation standard. Constructed from Lenzing FR® flame-resistant material. Alpinestars Race v3 Nomex Pants Key Features Soft-touch textile for feel and enhanced comfort. Lenzing FR® material is a natural viscose fiber with unique thermal insulation and flame resistance properties that help prevent heat stress.

Sparco X-Light+ Racing Shoes The Sparco X-Light+ Racing Shoes are ultra-lightweight professional racing shoes designed for drivers who want maximum weight savings, breathable comfort, and exceptional pedal feel. Built with FIA 8856-2018 approval, fire-retardant stretch fabric, Kevlar support cables, and a carbon fiber midsole, the X-Light+ is engineered for elite-level motorsport performance. The X-Light+ uses a full fabric upper that wraps the foot like a second skin, helping keep dust, debris, and unwanted material out of the shoe while maintaining comfort and flexibility. This breathable fireproof stretch fabric was developed by Sparco to provide protection, durability, and a close fit without unnecessary weight. Sparco X-Light+ Racing Shoe Features FIA 8856-2018 approved for motorsport competition use. Ultra-lightweight fire-retardant stretch fabric upper. Full fabric upper fits like a second skin for comfort and support. Kevlar cables woven into the upper provide added foot support. Full carbon fiber inlayed sole runs from heel to toe. Ultra-thin outsole improves pedal sensitivity and control. Anti-static, oil-resistant, and fuel-resistant outsole construction. Highly breathable design helps reduce heat buildup. Cushioned inner sole with printed silicone pattern improves traction and pedal feel. Designed for top-level professional drivers focused on weight savings and performance. Ultra-Lightweight Second-Skin Fit The Sparco X-Light+ is built around a fire-retardant stretch fabric upper that conforms closely to the foot. This second-skin fit helps reduce excess movement while keeping the shoe lightweight and breathable. The fabric construction also helps prevent dust, soil, and debris from entering the shoe during race use. Kevlar Cable Support Kevlar cables are woven into the upper to provide the right amount of support without adding unnecessary bulk. This helps the shoe remain flexible and comfortable while still giving the driver a secure, confidence-inspiring fit. Carbon Fiber Midsole The X-Light+ features a full carbon fiber inlayed sole developed by Sparco engineers. This flexible carbon fiber structure runs from the heel to the toe and is visible through the ultra-thin outsole. The design helps deliver outstanding pedal sensitivity while maintaining support and protection. Ultra-Thin Racing Outsole The outsole is ultra thin to maximize pedal feel and driver feedback. It is also anti-static, oil resistant, and fuel resistant, making it suitable for the cockpit, paddock, and garage environment. Printed Silicone Inner Sole The cushioned inner sole includes a printed silicone pattern to improve traction inside the shoe. This helps keep the foot planted while enhancing overall pedal feel and control during braking, throttle modulation, and quick pedal transitions. Available Colors Black White/Black Black/Orange Black/Yellow Black/Red Sparco X-Light+ Racing Shoe Specifications Approval: FIA 8856-2018 Upper: Fire-retardant stretch fabric with soft leather construction Support: Kevlar cables woven into the upper Sole: Full carbon fiber inlayed sole Outsole: Ultra-thin, anti-static, oil-resistant, and fuel-resistant Inner Sole: Cushioned inner sole with printed silicone pattern Fit: Breathable second-skin fit Use: Professional motorsport, road racing, endurance racing, track days, and competition driving Sparco X-Light+ Racing Shoes Sizing Chart Sparco X-Light+ Racing Shoe FAQs Are the Sparco X-Light+ Racing Shoes FIA approved?Yes. The Sparco X-Light+ Racing Shoes are FIA 8856-2018 approved for motorsport competition use. What makes the Sparco X-Light+ so lightweight?The X-Light+ uses a fire-retardant stretch fabric upper, lightweight support materials, and an ultra-thin racing outsole to reduce weight while maintaining protection and performance. Does the Sparco X-Light+ have a carbon fiber sole?Yes. The X-Light+ features a full carbon fiber inlayed sole that runs from heel to toe for support, flexibility, and pedal sensitivity. Are these shoes breathable?Yes. The stretch fabric upper is highly breathable and designed to fit closely around the foot while helping reduce heat buildup. Is the outsole oil and fuel resistant?Yes. The ultra-thin outsole is anti-static, oil resistant, and fuel resistant for racing and paddock environments. What colors are available?The Sparco X-Light+ Racing Shoes are available in Black, White/Black, Black/Orange, Black/Yellow, and Black/Red.

Stilo ST5 GT ZERO 8860-2018 Carbon Helmet FIA 8860 Certification valid to 2033 for these ST5 GT Zero Carbon Fiber Helmets The Stilo ST5 GT ZERO 8860-2018 Carbon Helmet is one of Stilo's most advanced ST5-generation full-face racing helmets, combining an exceptionally lightweight ZERO carbon fiber shell with FIA 8860-2018 protection, integrated accessory ports, excellent visibility, and a design developed specifically for serious closed-cockpit competition. Built for professional racers and drivers who refuse to compromise on helmet weight or protection, the ST5 GT ZERO delivers the premium construction, comfort, and equipment integration that made the ST5 platform a favorite in GT, endurance, touring-car, and sports-car racing.   FIA 8860-2018 Advanced Helmet Protection The ST5 GT ZERO is homologated to the FIA 8860-2018 advanced helmet standard. This high-level motorsport specification places demanding requirements on impact protection, shell strength, energy absorption, and penetration resistance. For racers competing in high-speed professional motorsport, FIA 8860-2018 construction provides a significant step above conventional club-level helmet specifications. Stilo ZERO Carbon Fiber Construction The defining feature of the ST5 GT ZERO is its extremely lightweight ZERO carbon fiber shell. Stilo developed the ZERO construction for racers looking to reduce helmet mass as much as possible while retaining FIA 8860-level protection. Lower helmet weight can reduce strain on the driver's head and neck during heavy braking, high lateral loads, long endurance stints, and extended race sessions. ST5 GT ZERO Helmet Weight Small shell: approximately 2.5 lbs. (1130 g) up to size 59 with intercom Large shell: approximately 2.7 lbs. (1230 g) up to size 64 with intercom These exceptionally low weights make the ST5 GT ZERO a premium option for racers who place a high priority on reducing helmet mass. Purpose-Built for Closed-Cockpit Racing The GT configuration is designed around the needs of drivers competing inside closed-cockpit race cars. Its aerodynamic shell, integrated accessory ports, ventilation capability, communication compatibility, and excellent eyeport visibility make it particularly well suited to GT, endurance, touring-car, prototype, and sports-car racing. Dual Integrated Side Ports One of the ST5 GT's most distinctive features is its pair of integrated side ports. Instead of attaching large external fittings to the helmet, Stilo incorporates the accessory connection points directly into the shell design. The side ports can be configured for several types of driver equipment, allowing the helmet to be tailored to the car and racing application. Side Port Accessory Options Integrated communication electronics Forced-air helmet systems Driver hydration systems Helmet Eject system integration Radio and communication connections When an accessory is not installed, the ports remain discreet and integrated into the helmet profile. GT vs. Naked ST5 ZERO The ST5 GT ZERO includes Stilo's multifunction side ports for electronics, air, hydration, and other accessories. The ST5 N ZERO, often referred to as the Naked version, removes the side-port system for drivers who prefer the cleanest and simplest possible shell configuration. Larger Eyeport for Improved Visibility The ST5 platform features a taller and lower eyeport than previous-generation Stilo helmets, providing improved visibility without sacrificing the coverage expected from a professional full-face racing helmet. The increased viewing area helps drivers see more of the cockpit, mirrors, gauges, apexes, surrounding traffic, and track environment. Center Pinch-Clip Visor Latch The ST5 visor uses Stilo's convenient center pinch-clip locking system. The centrally positioned latch is designed to make visor opening and closing easier, even while the driver is wearing racing gloves. This placement also allows the visor to be operated naturally with either hand. ST5 Visor Compatibility The ST5 GT ZERO uses the standard Stilo ST5 visor family, giving racers access to a wide variety of shield options for different lighting and weather conditions. Available ST5 shield options include clear, smoked, mirrored, colored, and other specialty configurations. Eight Top Ventilation Openings The ST5 GT ZERO includes eight top ventilation openings designed to help move cooling air through the helmet and reduce heat buildup during demanding sessions. These openings can also be used with compatible Stilo ST5 Top Air systems when forced-air cooling is desired. Forced-Air System Compatible For hot closed-cockpit cars, the ST5 GT ZERO can be configured with a compatible forced-air system. The helmet's integrated design allows air-system hardware to be added without turning the helmet into a bulky collection of external fittings. This makes the GT ZERO especially attractive for endurance racers and drivers competing in high-temperature cockpits. Integrated Communication Capability The ST5 GT platform was designed to accommodate professional racing communications. Compatible microphones, speakers, earbuds, radio connections, and other electronics can be integrated into the helmet depending on the driver's communication system. This approach helps keep wiring organized while maintaining the comfort and fit of the interior. Hydration System Compatible The ST5 GT ZERO can also accommodate a compatible driver drinking system through its integrated accessory architecture. For endurance racing and long sessions, hydration-system integration allows the driver to drink without removing safety equipment or relying on awkward external routing. Eject System Compatible The helmet can be configured for use with a compatible Eject helmet-removal system, providing teams and safety crews with another option when preparing the driver's complete safety package. Factory HANS Anchors Included The ST5 GT ZERO includes HANS/FHR post anchors, allowing the helmet to be used with compatible Head and Neck Restraint systems. Having the anchors installed as part of the helmet package simplifies race preparation and ensures the helmet is ready for the restraint equipment commonly required in professional motorsport. Contoured ST5 Cheek Pads The ST5 interior uses redesigned, contoured cheek pads developed to improve comfort and helmet stability. A proper racing helmet should remain firmly positioned on the head during braking, cornering, vibration, and aerodynamic loading without creating excessive localized pressure. Stilo ST5 GT ZERO Features FIA 8860-2018 homologation Certification valid through 2033 for these specific helmets Ultra-lightweight ZERO carbon fiber shell Approximately 1130 g small-shell weight with intercom Approximately 1230 g large-shell weight with intercom Designed for professional closed-cockpit racing Dual integrated multifunction side ports Communication-system compatible Forced-air system compatible Hydration-system compatible Eject system compatible Taller and lower eyeport for improved visibility Center pinch-clip visor latch Compatible with standard Stilo ST5 shields Eight top ventilation openings Compatible with Stilo ST5 Top Air systems Contoured comfort cheek pads Factory HANS/FHR anchors included Helmet bag designed to accommodate helmet and HNR included Why Choose the ST5 GT ZERO? The ST5 GT ZERO is built for the racer who wants the integrated functionality of the ST5 GT platform without giving up the weight advantage of Stilo's ZERO carbon construction. Its combination of FIA 8860-2018 protection, low shell weight, integrated communication and cooling options, excellent visibility, and HANS compatibility makes it especially well suited to demanding GT and endurance applications. Getting the Correct Stilo Fit A properly fitted racing helmet should feel snug and secure around the entire head with even pressure and no concentrated painful areas. Measure around the widest part of the head using a flexible measuring tape, approximately one inch above the eyebrows and around the rear of the skull. Take two or three measurements and use the largest consistent measurement when selecting a helmet size. Drivers moving from another helmet brand should select their Stilo size according to actual head circumference rather than assuming the same numerical size will fit identically. Stilo Size 59 Fit Note We have found that customers who normally wear a size 59 in other helmet brands are often more comfortable in a Stilo size 60, which moves the driver into the larger shell. Please measure carefully and order accordingly. Stilo ST5 GT ZERO Carbon Fiber Helmet Sizing Chart Questions & Answers What certification does the Stilo ST5 GT ZERO have?The ST5 GT ZERO is homologated to the FIA 8860-2018 advanced helmet standard. The certification on these specific helmets is valid through 2033. What makes the ZERO version different?The ZERO uses Stilo's lightweight premium carbon construction to minimize helmet weight while retaining FIA 8860-2018 protection. How much does the ST5 GT ZERO weigh?The small shell weighs approximately 1130 g, or 2.5 lbs., with intercom equipment, while the large shell weighs approximately 1230 g, or 2.7 lbs., with intercom equipment. What are the side ports used for?The two integrated side ports can support compatible electronics, forced-air equipment, hydration systems, and helmet-removal equipment depending on the driver's configuration. What is the difference between the ST5 GT ZERO and ST5 N ZERO?The GT ZERO includes Stilo's multifunction side ports. The N ZERO is the Naked version and eliminates the side-port system for a simpler shell configuration. Can I install a radio or communication system?Yes. The ST5 GT is designed to accommodate several compatible professional communication configurations. Can I connect a forced-air system?Yes. The helmet's ventilation openings and accessory architecture allow compatible Stilo forced-air components to be installed. Can I use a drinking system?Yes. Compatible hydration equipment can be integrated into the ST5 GT ZERO. Does the helmet include HANS anchors?Yes. HANS/FHR post anchors are included. What shields fit the ST5 GT ZERO?The helmet uses the standard Stilo ST5 shield family, giving drivers several clear, tinted, mirrored, and specialty visor options. How many top vents does the helmet have?The ST5 GT ZERO has eight top ventilation openings, which can also be used with compatible Stilo Top Air equipment. Why might I need a Stilo size 60 if I normally wear a 59?Fit varies between helmet manufacturers. Based on customer fitting experience, many drivers who typically wear a size 59 in other brands are more comfortable in a Stilo size 60. Does a helmet bag come with the ST5 GT ZERO?Yes. A Stilo helmet bag designed to accommodate the helmet and HNR is included. Does this helmet require a signature for delivery?Yes. This helmet ships with signature required for delivery.  

Icon B2 Open-Face Auto Racing Helmet Modern Safety and Classic Open-Face Design on Sale Today! The Icon B2 Open-Face Auto Racing Helmet delivers professional-grade protection in a lightweight, comfortable open-face configuration—ideal for drivers who prefer maximum visibility, airflow, and compatibility with intercoms or eye protection. Designed for competitive motorsports and track-day use, the B2 blends modern safety engineering with a clean, no-nonsense aesthetic. Built around a composite shell and multi-density EPS liner, the Icon B2 is engineered to manage impact energy effectively while maintaining a balanced, comfortable fit during long stints behind the wheel. Its open-face design makes it especially well-suited for drivers running closed-cockpit cars, vintage race cars, rally applications, or instructors who need easy communication. Key Features Snell SA2020 approved for auto racing use Lightweight composite shell construction Multi-density EPS liner for optimized impact absorption Open-face design for improved visibility and airflow Fire-retardant interior materials Comfort-focused fit for extended driving sessions Compatible with most racing intercom and radio systems Ideal Applications Track days and HPDE events Club racing and time trials Vintage racing Rally and autocross Driver instruction and coaching Why Choose the Icon B2? The Icon B2 Open-Face Helmet is a strong choice for drivers who value comfort, communication, and a wide field of view—without sacrificing recognized safety certification. Whether you’re logging laps at a track day or competing in sanctioned motorsport events, the B2 offers dependable protection in a versatile, driver-friendly package.

Alpinestars SuperMono v2 Racing Shoes The Alpinestars Supermono v2 Racing Shoes are engineered for drivers who demand an exceptionally lightweight fit, precise pedal feedback, and dependable heat protection. Every component has been carefully designed to reduce unnecessary weight while maintaining the comfort, strength, and support required for competitive auto racing. A contoured sock-style construction allows the Supermono v2 to follow the natural shape of the foot more closely than a traditional racing shoe. The streamlined design reduces bulk inside the cockpit, while strategically positioned perforations improve ventilation during demanding sprint races, endurance events, and extended track sessions. The premium bovine leather upper uses a patented one-piece construction that minimizes seams and excess material. Combined with a fire-resistant elastic collar, para-aramidic lining, and Alpinestars’ thin Formula 1-derived rubber outsole, the Supermono v2 provides a secure connection between the driver and the pedals. Ultralight Sock-Style Construction The Supermono v2 features a sculpted, sock-like design that conforms closely to the lines of the foot. This low-profile construction reduces unnecessary material and provides a secure performance fit without creating excessive bulk around the ankle or pedal area. Premium One-Piece Leather Upper The main upper is constructed from premium bovine leather for an effective balance of flexibility, mechanical resistance, and driver comfort. Alpinestars’ patented one-piece upper design reduces the number of separate panels and seams, helping lower weight while improving comfort inside the cockpit. Secure Hook-and-Loop Closure A streamlined hook-and-loop closure provides quick and secure adjustment. A hidden instep adjustment allows the driver to fine-tune the fit across the top of the foot for improved support and reduced movement during heavy braking and rapid pedal transitions. Fire-Resistant Sock and Lining The elastic fire-resistant collar and tongue provide a close, comfortable fit around the ankle. A para-aramidic tubular lining offers excellent heat resistance, strength, and weight savings while maintaining the flexibility needed for precise pedal operation. Strategic Ventilation Perforated zones are positioned along the lateral and medial sides, front toe area, and collar to improve airflow throughout the shoe. The perforated inner gusset and breathable construction help manage heat and moisture during demanding driving conditions. Formula 1-Derived Racing Outsole The Supermono v2 uses Alpinestars’ exclusive thin rubber compound outsole developed from its Formula 1 racing program. The thin construction provides excellent sensitivity through the brake, throttle, and clutch pedals, while the textured surface supplies dependable grip. Lightweight Cushioning and Support Microporous padding surrounds the heel and footbed to improve comfort without adding unnecessary weight. A microporous heel section provides additional shock absorption, while nitrile rubber collar padding supports the ankle and improves comfort during long sessions. Alpinestars Supermono v2 Racing Shoe Features Ultralight professional auto racing shoe Contoured sock-style construction Premium bovine leather upper Patented one-piece upper design Fire-resistant elastic collar and tongue Para-aramidic tubular lining Main hook-and-loop closure Hidden instep fit adjustment Front and rear pull tabs for easier entry Strategically positioned ventilation perforations Perforated inner gusset padding Lightweight microporous heel and footbed padding Nitrile rubber collar padding Texon and microporous insole construction Microporous heel for additional shock absorption Transfer-applied graphics for reduced weight Thin Formula 1-derived rubber outsole Textured outsole pattern for dependable pedal grip SFI 3.3/5 homologated Technical Specifications Product: Alpinestars Supermono v2 Racing Shoes Manufacturer: Alpinestars Upper Material: Premium bovine leather Upper Construction: Patented one-piece design Lining: Para-aramidic tubular lining Closure: Hook-and-loop with hidden instep adjustment Collar and Tongue: Elastic fire-resistant construction Padding: Lightweight microporous material and nitrile rubber Insole: Texon with microporous upper material Outsole: Thin textured rubber compound derived from Alpinestars’ Formula 1 racing program Certification: SFI 3.3/5 Alpinestars Supermono v2 Racing Shoes Sizing Chart Frequently Asked Questions Are the Alpinestars Supermono v2 Racing Shoes SFI approved? Yes. This version of the Alpinestars Supermono v2 complies with the SFI 3.3/5 homologation standard. Drivers should confirm the current footwear requirements for their racing series and class. What are the Supermono v2 Racing Shoes made from? The main upper is constructed from premium bovine leather using a patented one-piece design. The interior uses a heat-resistant para-aramidic tubular lining. How do the Alpinestars Supermono v2 Racing Shoes fit? The Supermono v2 has a close, contoured racing fit designed to feel similar to a sock. The hook-and-loop closure and hidden instep adjustment allow the fit to be secured across the top of the foot. Do the Supermono v2 Racing Shoes have traditional laces? No. The shoe uses a streamlined hook-and-loop closure with a hidden instep adjustment, reducing exposed components and maintaining a clean, lightweight design. Are the Alpinestars Supermono v2 Racing Shoes breathable? Yes. Strategically positioned perforations on the lateral side, medial side, toe area, and collar promote airflow. The perforated inner gusset also improves breathability around the foot. What makes the Supermono v2 outsole different? The thin rubber outsole is derived from Alpinestars’ Formula 1 racing program. Its low-profile construction improves pedal sensitivity, while the textured pattern provides secure grip on the pedals. Are these racing shoes suitable for HPDE and track days? Yes. Their secure fit, lightweight construction, ventilation, and responsive outsole make them suitable for professional racing, club competition, time trials, autocross, HPDE events, and track-day driving. How should I care for the Alpinestars Supermono v2 Racing Shoes? Allow the shoes to air dry naturally after use and keep them away from direct heat. Clean the leather with an appropriate leather-care product and avoid unnecessary walking on gravel, rough pavement, or other abrasive surfaces. Ultralight Performance and Precise Pedal Feedback The Alpinestars Supermono v2 Racing Shoes combine a sculpted sock-like fit, premium one-piece leather construction, heat-resistant lining, and a thin Formula 1-derived outsole. Their minimal design and lightweight cushioning provide the comfort, support, and pedal sensitivity required by drivers competing at the highest levels of motorsports.

OMP Sport Gloves FIA 8856-2018 The OMP Sport Gloves provide certified fire-resistant protection, dependable steering-wheel grip, and lightweight comfort at an accessible price. Homologated to the FIA 8856-2018 standard, these racing gloves are well suited for HPDE events, autocross, time trials, club racing, and other motorsport applications requiring approved driver equipment. Silicone printing across the palm creates a secure connection with the steering wheel, while the elasticated wrist makes the gloves easy to put on and helps keep them securely positioned throughout each session. Their straightforward construction gives drivers the protection and control they need without unnecessary bulk. Certified Protection at an Accessible Price The OMP Sport Gloves are designed for drivers who need current FIA-approved protection without moving into a premium racing-glove price category. They combine essential safety features with a comfortable construction that works well for both developing drivers and experienced club-level competitors. FIA 8856-2018 homologation makes them suitable for many competitive motorsport events requiring certified fire-resistant driver apparel. Drivers should always confirm the specific equipment requirements of their sanctioning organization or racing series. Silicone-Printed Palm Grip Silicone printing across the palm improves traction between the glove and steering wheel. The low-profile design helps provide a secure grip without adding a bulky reinforcement layer that could reduce steering feedback. The additional traction allows the driver to maintain control with a more relaxed grip, which can help reduce unnecessary hand and forearm fatigue during longer sessions. Lightweight Driving Comfort The lightweight construction allows natural hand movement and maintains sensitivity through the steering wheel. This makes the OMP Sport a practical option for track days, qualifying sessions, sprint races, and extended driving events. A close-fitting design minimizes excess material around the hand while allowing the driver to operate paddle shifters, switches, buttons, and other cockpit controls with confidence. Elasticated Wrist Entry An elasticated wrist opening allows quick entry and removal while helping keep the glove securely positioned during competition. The streamlined closure eliminates the need for a bulky adjustment strap and provides a clean overlap with compatible racing-suit sleeves. Versatile OMP Styling The OMP Sport Gloves are offered in multiple color combinations, allowing drivers to coordinate them with OMP racing suits, shoes, helmets, and other equipment. Their modern graphics provide a recognizable competition look while maintaining a practical, performance-focused design. OMP Sport Racing Glove Features Fire-resistant auto racing glove construction FIA 8856-2018 homologated Silicone-printed palm for secure steering-wheel grip Low-profile grip design preserves steering sensitivity Lightweight construction for extended driving comfort Elasticated wrist for easy entry and secure retention Close-fitting design supports dexterity and cockpit control Available in multiple OMP color combinations OMP Sport Glove Specifications Manufacturer: OMP Model: Sport Product Type: Fire-Resistant Auto Racing Gloves Palm: Silicone-Printed Grip Wrist Closure: Elasticated Entry Homologation: FIA 8856-2018 Recommended Use: HPDE, Autocross, Time Trial, Club Racing, and Competitive Motorsport Why Choose the OMP Sport Gloves? The OMP Sport Gloves focus on the features drivers use every lap: certified fire protection, secure steering grip, comfortable hand movement, and a simple elasticated wrist. Their approachable price makes them a strong choice for new competitors purchasing their first FIA-approved gloves or experienced drivers looking for dependable track equipment. OMP Sport Glove Size Chart Frequently Asked Questions Are the OMP Sport Gloves FIA approved?Yes. The OMP Sport Gloves are homologated to the FIA 8856-2018 standard for fire-resistant driver clothing. Can these gloves be used for wheel-to-wheel racing?Yes, provided FIA 8856-2018-approved gloves meet the requirements of the racing series, sanctioning organization, or event. Are the OMP Sport Gloves suitable for beginners?Yes. Their combination of certified protection, comfortable construction, dependable grip, and accessible pricing makes them a practical choice for developing drivers. Do the palms have silicone grip?Yes. Silicone printing across the palm improves traction and steering-wheel control without adding excessive bulk. How do the OMP Sport Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips. Most drivers begin with their usual OMP glove size. Do the gloves have an adjustable wrist strap?No. The elasticated wrist provides a secure fit without requiring a separate hook-and-loop adjustment strap. Are they comfortable for long track sessions?Yes. Their lightweight construction and streamlined fit are designed to support comfort and dexterity during extended driving sessions. How should the OMP Sport Gloves be cleaned?Gently hand wash them using mild soap and cool water, then allow them to air dry. Avoid bleach, harsh chemicals, machine drying, and direct high heat.

Chillout Systems Pro Touring Cooling Shirt FIA/SFI Homologated When the heat is on—literally—this is the cooling shirt that steps up. The Chillout Systems Pro Touring Cooling Shirt offers full-coverage performance cooling with professional-grade FIA and SFI approvals. Whether you’re running endurance races in brutal temps or hammering through back-to-back sessions, this shirt keeps your core cool, your mind sharp, and your focus laser-locked. It’s race-proven tech that goes under your suit but works overtime to keep you on top of your game. Maximum Cooling Performance with FIA/SFI Homologation Approval Features: Superior Cooling Coverage: With up to 160 feet of precision-placed tubing, this shirt offers maximum body coverage for more effective core temperature regulation in the harshest racing conditions. Contoured Fit for Optimal Contact: Designed to hug the torso like a second skin, ensuring the cooling veins stay flush with your body and don't shift while you drive. Better contact equals better cooling and less distraction. Advanced 8-Circuit Cooling: Eight individual coolant circuits work in unison to eliminate hot spots and provide fast, balanced heat dissipation across your entire upper body. Antimicrobial Construction: Woven with bacteria-fighting fibers that keep your shirt fresher for longer—even during multi-day race weekends. Certified safe and skin-friendly. FIA and SFI Certified: Approved to FIA 8856-2018 and SFI 3.3 standards for professional use in sanctioned motorsport events. Custom Fit Options: Choose the correct fitting option to match your cooling system. Sizes 3XL and above require an 8-week lead time due to custom production. Chillout Systems Pro Touring Cooling Shirt FAQs: Is this shirt compatible with all Chillout cooling systems? Yes, but you must select the proper fitting to match your system. Compatibility is system-dependent. How long does it take to receive a 3XL or larger size? Larger sizes (3XL+) are made to order and require up to 8 weeks for production. These are not stocked items. Can I use this cooling shirt without FIA or SFI certification? Maybe, it depends on the applicable sanctioning body rules.  But the FIA and SFI approval means it's also safe and compliant for professional-level competition if needed. Is this shirt machine washable? Hand washing is strongly recommended to preserve the tubing and antibacterial properties. Do not use fabric softener. Stay cool and stay competitive with the Chillout Systems Pro Touring Cooling Shirt—because overheating should never be the reason you miss a podium.

Sparco Prime-R Racing Shoes The Sparco Prime-R Racing Shoes deliver an ultralight design, responsive pedal feedback, and premium comfort for demanding competitive drivers. Developed for high-level motorsports, the Prime-R weighs approximately 240 grams in size 42, helping reduce unnecessary weight without compromising support or protection. The soft kangaroo leather upper provides a lightweight and flexible fit that moves naturally with the driver’s foot. Strategically placed perforations, a breathable lining, and an ultra-breathable padded tongue help control heat and perspiration during long races and demanding track sessions. A thin rubber outsole with differentiated grip textures provides direct pedal feedback while maintaining dependable traction. The sole is also designed to resist fuel and oil and features optimized stiffness for race cars that require high brake-pedal pressure. Lightweight Kangaroo Leather Construction The Prime-R’s kangaroo leather upper provides an excellent combination of low weight, flexibility, and durability. Fully inkjet-printed graphics reduce the need for heavier decorative materials while creating the shoe’s distinctive professional appearance. Breathable Racing Comfort Perforations throughout the upper promote airflow around the foot. An anti-perspiration breathable lining and padded fabric tongue provide additional comfort during sprint races, endurance events, qualifying sessions, and extended track use. Secure Lace and Ankle Closure Ultralight flat laces provide a close, adjustable fit, while the ultra-grip hook-and-loop ankle strap secures both the laces and ankle. This helps reduce unwanted movement and keeps the closure system safely contained while driving. Responsive Racing Sole The thin rubber sole is engineered to provide excellent pedal sensitivity, allowing the driver to better feel brake pressure, throttle position, and pedal movement. Differentiated grip textures provide traction where it is needed without adding unnecessary bulk. Sparco Prime-R Racing Shoe Features FIA 8856-2018 homologated SFI 3.3/5 homologated Approximately 240 grams in size 42 Soft and lightweight kangaroo leather upper Fully inkjet-printed graphics for reduced weight Perforated upper for improved breathability High abrasion-resistant leather inserts Ultralight flat racing laces Ultra-grip hook-and-loop ankle strap Strap helps secure the ankle and contain the laces Comfortable racing insole Anti-perspiration breathable lining Padded tongue made from ultra-breathable fabric Thin rubber sole for responsive pedal feedback Differentiated outsole grip texture Fuel- and oil-resistant outsole construction Technical Specifications Product: Sparco Prime-R Racing Shoes Manufacturer: Sparco Model: Prime-R Upper Material: Kangaroo leather Outsole: Thin rubber with differentiated grip texture Closure: Flat laces with hook-and-loop ankle strap Lining: Anti-perspiration and breathable Ventilation: Perforated upper and breathable tongue Weight: Approximately 240 grams in size 42 Certification: FIA 8856-2018 and SFI 3.3/5 Sizes: EU 36–48 Sparco Prime-R Racing Shoes Sizing Chart Frequently Asked Questions Are the Sparco Prime-R Racing Shoes FIA approved? Yes. The Sparco Prime-R is homologated to the FIA 8856-2018 standard for use in many sanctioned auto racing competitions. Are the Sparco Prime-R Racing Shoes SFI approved? Yes. The Prime-R is also homologated to the SFI 3.3/5 standard. Drivers should confirm the current footwear requirements for their racing series and class. How much do the Sparco Prime-R Racing Shoes weigh? The Prime-R weighs approximately 240 grams in EU size 42. Weight may vary slightly depending on shoe size. What are the Sparco Prime-R Racing Shoes made from? The upper is constructed from lightweight kangaroo leather with breathable perforations and high abrasion-resistant leather inserts in key areas. How do the Sparco Prime-R Racing Shoes fit? The Prime-R has a close, performance-oriented racing fit. The flat laces and hook-and-loop ankle strap allow the driver to adjust the fit while helping secure the foot and contain the laces. Are these shoes suitable for HPDE and track-day driving? Yes. Their lightweight construction, thin sole, and responsive pedal feel make them suitable for professional competition, club racing, time trials, autocross, HPDE events, and track days. Can the Sparco Prime-R be used for karting? The Prime-R can be worn for karting, but it is designed and certified as an auto racing shoe. Karting-specific shoes may provide outsole construction better suited to walking through paddock and pit areas. How should I care for kangaroo leather racing shoes? Keep the shoes dry, avoid unnecessary walking on abrasive surfaces, and allow them to air dry naturally after use. Clean the leather carefully with products intended for delicate leather and do not place the shoes near direct heat. Ultralight Performance and Precise Pedal Control The Sparco Prime-R Racing Shoes combine premium kangaroo leather, breathable comfort, secure ankle support, and an exceptionally thin racing sole. Their lightweight design and direct pedal feedback make them an excellent choice for drivers who demand precision during every braking, throttle, and shifting input.

CMS Special Edition Sabelt Hero TG-11 Geckotech Racing Gloves The CMS Special Edition Sabelt Hero TG-11 Geckotech Racing Gloves combine professional-level protection, exceptional steering-wheel grip, and exclusive Competition Motorsport styling. Developed in collaboration with Sabelt, this special-edition glove delivers the proven performance of the Hero TG-11 with distinctive CMS branding. Certified to the FIA 8856-2018 standard, these fire-resistant racing gloves are designed for drivers who demand dependable protection without sacrificing comfort or control. Their updated ergonomic construction provides a close, natural fit that reduces excess bulk and improves feel behind the wheel. Geckotech Grip Technology Sabelt Geckotech technology uses a high-grip silicone treatment across the palm to provide secure contact with the steering wheel. The textured surface helps maintain consistent control during demanding sessions, including high-temperature and high-intensity racing conditions. A reinforced internal palm construction improves durability in high-wear areas, helping the gloves withstand repeated use throughout a full racing season. CMS Special Edition Sabelt TG-11 Racing Glove Features FIA 8856-2018 homologated for motorsport competition Exclusive Competition Motorsport special-edition graphics Geckotech silicone palm treatment for exceptional grip Reinforced internal palm construction for increased durability Ergonomic design for a close and natural fit Lightweight construction with reduced bulk Extended racing cuff for added wrist coverage Available in sizes 8 through 12 Comfort and Driver Control The streamlined profile and updated fit allow the gloves to follow the natural shape of the hands. This design improves flexibility around the fingers and reduces material bunching, giving drivers a more precise connection with the steering wheel and vehicle controls. Breathable materials help manage heat during extended track sessions, while the long cuff provides additional coverage when worn with an approved racing suit. Sizing Chart CMS Special Edition Sabelt Hero TG-11 Geckotech FAQs Are these genuine Sabelt Hero TG-11 Geckotech racing gloves?Yes. Competition Motorsport and Sabelt collaborated to produce this special edition of the Hero TG-11 Geckotech glove with exclusive CMS graphics. Are these racing gloves FIA approved?Yes. The gloves are homologated to the FIA 8856-2018 standard for fire-resistant motorsport apparel. What makes the Geckotech palm different?The Geckotech palm uses a silicone-based grip treatment that improves steering-wheel contact and control during demanding driving conditions. How is the CMS Special Edition different from the standard TG-11?The CMS Special Edition combines the performance construction of the Sabelt Hero TG-11 with exclusive Competition Motorsport colors, graphics, and branding. Do these gloves run true to size?The Hero TG-11 uses an updated ergonomic fit designed to follow standard racing-glove sizing. Drivers between sizes may prefer the larger size for additional room. What sizes are available?The CMS Special Edition Sabelt Hero TG-11 Geckotech Racing Gloves are available in sizes 8 through 12.  

Stilo ST5 FN 8860-2018 ABP Carbon Fiber Racing Helmet FIA 8860 Certification valid thru 2033 for these ST5 FN 8860 ABP Helmet The Stilo ST5 FN 8860-2018 ABP Carbon Fiber Racing Helmet is engineered for professional drivers who demand one of the highest levels of helmet protection available in motorsports. Designed around the stringent FIA 8860-2018 ABP standard, the ST5 FN ABP combines an extremely lightweight carbon-fiber shell with Advanced Ballistic Protection developed for top-level open-wheel, prototype, endurance, and professional racing. The FN designation stands for Stilo's Formula Naked configuration. Unlike the ST5 GT, the FN eliminates the external integrated side ports to reduce weight and create an exceptionally clean aerodynamic profile. The helmet can still be configured for communications, forced air, hydration, and helmet eject systems through Stilo's purpose-built accessory system. For drivers competing at the highest levels of motorsport—or racers who simply refuse to compromise on protection—the ST5 FN 8860-2018 ABP delivers exceptional safety, low weight, comfort, and professional-grade functionality. FIA 8860-2018 ABP Advanced Ballistic Protection ABP stands for Advanced Ballistic Protection. FIA developed the ABP specification to provide increased protection to the frontal area of the helmet, particularly around the forehead and visor opening. The ABP design incorporates additional protection directly into the helmet structure instead of relying on the separate Zylon visor panel used with previous-generation FIA 8860-2010 Formula 1 helmets. The FIA 8860-2018 ABP testing procedure includes demanding impact and projectile testing intended for motorsports where drivers may be exposed to debris and other high-energy impacts. The result is an exceptionally protective helmet designed for the highest levels of professional competition. Lightweight Carbon Fiber Construction The Stilo ST5 FN 8860-2018 ABP is constructed from 100% medium-tensile carbon fiber, providing an outstanding combination of strength, rigidity, impact performance, and low weight. Reducing helmet weight is especially important in open-wheel and high-downforce race cars, where sustained lateral G-forces can place significant loads on the driver's head and neck. The lightweight construction of the ST5 FN helps reduce fatigue during long sessions without sacrificing the protection required by the FIA 8860-2018 ABP standard. Designed for Open-Cockpit and Professional Racing The ST5 FN ABP is particularly well suited for open-wheel and open-cockpit racing where the driver's helmet is more exposed to airflow, debris, and other environmental factors. The ABP configuration uses a reduced-height eyeport and specialized visor to increase protection around the forehead area. Combined with the aerodynamic ST5 shell, the helmet provides a compact and streamlined profile for high-speed racing. Formula Naked FN Design The FN or Formula Naked configuration removes the external side accessory ports found on the Stilo ST5 GT. Eliminating these ports reduces weight and creates a smooth exterior shell ideally suited to Formula, prototype, and open-wheel applications. Despite the clean exterior, the ST5 FN remains compatible with a wide range of Stilo accessories and can be configured for driver communications, hydration, top forced air, and helmet eject systems. Integrated Accessory Capability The ST5 FN was designed so important racing accessories can be added without creating unnecessary cables, hoses, or components hanging around the driver's helmet. Compatible with Stilo FN communication systems Compatible with Stilo top forced-air systems Compatible with helmet eject systems Compatible with hydration systems Available aero accessories for open-cockpit applications Compatible with Stilo ABP-specific visors Communications, forced-air components, hydration equipment, and other optional accessories are sold separately unless specifically included with the selected configuration. Factory-Installed HANS Posts The Stilo ST5 FN 8860-2018 ABP comes with factory-installed HANS posts, making it ready for use with compatible head-and-neck restraint systems. Factory installation provides a clean, properly positioned attachment solution without requiring the racer to install restraint anchors separately. ST5 ABP Visor System The ABP helmet uses a specialized reduced-height eyeport and visor designed specifically around the Advanced Ballistic Protection requirements. Stilo's center visor locking system allows the shield to be opened and closed easily, even while wearing racing gloves. Tear-off posts allow the helmet to be configured for racing environments where debris and contamination can quickly affect visibility. Important: Because of the different eyeport design, always verify that replacement shields and accessories are specifically compatible with the ST5 ABP helmet. Improved Interior Comfort Stilo redesigned the ST5 interior with more contoured cheek pads and padding designed to improve comfort and helmet stability. Removable earmuff cushions help isolate the driver's ears from surrounding noise, creating a quieter environment and providing dedicated space for compatible communications equipment. Eight-Point Top Ventilation Eight ventilation openings across the top of the helmet help manage airflow and can also be used with the optional Stilo ST5 Top Air System. A forced-air system can be especially valuable in endurance racing, enclosed cockpits, and hot-weather competition where maintaining driver comfort and concentration becomes increasingly important. Stilo ST5 FN 8860-2018 ABP Features FIA 8860-2018 ABP certified Advanced Ballistic Protection 100% medium-tensile carbon-fiber construction Ultra-lightweight FN Formula Naked design Designed for open-wheel, prototype, endurance, and professional racing Reduced-height ABP eyeport for increased frontal protection Clear ABP visor included Tear-off compatible visor system Center visor locking mechanism Factory-installed HANS posts Eight top ventilation openings Compatible with Stilo top forced-air systems Compatible with FN communication systems Compatible with hydration systems Compatible with helmet eject systems Contoured cheek pads Removable earmuff cushions Nomex interior Double D-ring chin strap Two-shell construction for optimized fit and weight Stilo ST5 FN 8860-2018 ABP Helmet Sizing Chart Stilo ST5 full-face helmets use two different shell sizes to provide a better-fitting helmet without adding unnecessary padding and weight. Competition Motorsport Fit Note: We have found that customers who normally wear a size 59 in some other helmet brands are often more comfortable moving to a Stilo size 60. Stilo helmets tend to fit slightly snugger than many competing brands, so accurate measurement is important. How to Measure for a Stilo Helmet Use a flexible cloth measuring tape and measure around the widest part of your head. Position the tape approximately one inch above your eyebrows, run it above your ears, and continue around the widest portion at the back of your head. Take the measurement two or three times and use the largest number. A properly fitted racing helmet should fit firmly and evenly around your head without creating painful pressure points. View the Competition Motorsport Auto Racing Helmet Buyer's Guide Stilo ST5 FN 8860-2018 ABP FAQs Q: What does ABP mean on a Stilo helmet?A: ABP stands for Advanced Ballistic Protection. It is part of the FIA 8860-2018 ABP specification and provides increased protection around the frontal portion of the helmet and eyeport. Q: What certification does the Stilo ST5 FN ABP have?A: This helmet is certified to the FIA 8860-2018 ABP advanced helmet standard. Q: Is the ST5 FN ABP Snell certified?A: No. This helmet's primary certification is FIA 8860-2018 ABP. It should not be confused with the Snell SA2020 versions of the ST5. Q: What does FN mean?A: FN stands for Formula Naked. The FN configuration eliminates the external side accessory ports found on the ST5 GT to minimize weight and provide a clean aerodynamic shell. Q: Is the ST5 FN ABP designed for open-wheel racing?A: Yes. The helmet is particularly well suited for open-wheel, prototype, Formula, and other open-cockpit racing applications where advanced protection and low weight are priorities. Q: Does the helmet include HANS posts?A: Yes. Factory-installed HANS posts are included. Q: Can communications be installed in the FN helmet?A: Yes. The helmet can be equipped with compatible Stilo FN communication systems even though it does not have the external integrated side ports found on the ST5 GT. Q: Can I add a forced-air system?A: Yes. The eight top ventilation openings allow the helmet to be configured with a compatible Stilo ST5 top forced-air system. Q: Can I use a regular ST5 visor on the ABP helmet?A: The ABP helmet uses a specialized eyeport and visor configuration. Replacement shields should always be confirmed as compatible with the ST5 ABP helmet before ordering. Q: How many shell sizes does the ST5 use?A: The ST5 full-face platform uses two shell sizes. Sizes 54 through 59 use the small shell, while sizes 60 through 64 use the large shell. Q: Does Stilo run small?A: Stilo helmets generally fit slightly snugger than many other helmet brands. Accurate head measurement is recommended before ordering. Professional-Level Protection Without Compromise The Stilo ST5 FN 8860-2018 ABP is built for racers who demand exceptional protection without unnecessary weight. Its carbon-fiber shell, Advanced Ballistic Protection, Formula Naked aerodynamic design, factory-installed HANS posts, and extensive accessory compatibility make it a serious choice for professional-level competition. Whether you're racing an open-wheel car, prototype, high-downforce machine, or another application requiring FIA 8860-2018 ABP certification, the ST5 FN delivers the protection, lightweight construction, and functionality expected from one of Stilo's premier racing helmets. This helmet will ship with signature required for delivery.