Bell and Arai Helmets - Only Helmets

Bell HP77 EVO-IV 8860-2018 APB Carbon Fiber Helmet Pre-order: Ships after Q3. Bell Helmets Championship Pedigree Auto Racing Helmet Based on Bell’s highly successful F1 World Champion proven HP7 design, the Bell HP77 8860-2018 provides the latest impact protection by lowering the visor opening 12 mm and reinforcing the front of the helmet with advanced ballistic protection (ABP). The HP77 is the most advanced FIA8860-2018 helmet in Bell’s line-up, setting a new standard for lightweight, aerodynamically superior carbon fiber helmet performance to meet the intense demands of open-wheel and open-cockpit racing. The Bell HP77 carbon fiber helmet is homologated to the FIA 8860-2018 ABP standard, the most rigorous sport helmet standard on the planet. The Bell HP77 carbon fiber helmet was designed for professional formula racers competing at the highest levels of the sport and for any other racing driver who considers safety of paramount importance. Bell HP77 8860-2018 Carbon Fiber Helmet Details: Homologation: FIA8860-2018 ABP Visor opening lowered 12 mm adding ballistic protection from medium-size debris High-strength and high-modulus carbon fiber shell Advanced multi-density, multi-piece liner for energy absorption and impact performance Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor Top and chin bar ventilation system with 12 intake and exhaust channels Shell and shield design optimized for aerodynamic performance Integrated channels for drink tube and radio systems Top spoiler, top and chin bar gurneys available separately Factory-installed HANS anchors HP helmet bag included Color: Matte Carbon Fiber Finish Sizes: 54cm to 59+ Compatible Shields: SE077 Shield Pivot Kit: SV (SE07, SE077) Bell HP77 Interior Fabric Color Options: Custom interior fabric is available in Black, White, Red, Tan, Purple, Blue, Green or Neon Yellow. These are special order, additional charges will apply. Grey interior fabric is standard.

Arai GP-7SRC ABP Carbon Racing Helmet The Best Arai Auto Racing Helmet The new Arai GP-7SRC ABP is a stunning example of Arai’s vision and technological mastery, engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary Carbon Fiber (CF) weave that combines CF’s existing benefits of high strength and extreme light weight. But there's a major added benefit that standard CF does not possess: flexibility. (Standard CF tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of high end closed-cockpit racing. The remaining list of Arai GP-7SRC features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The Arai GP-7SRC ABP meets or exceeds the FIA 8860-2018 ABP homologation standard. Advanced Ballistic Protection The Formula One Standard FIA's new ABP (Advanced Ballistic Protection) specification is intended especially for drivers in open cars. The Arai GP-7SRC ABP has been strengthened in the forehead area, incorporating an external intrusion panel (previously mounted to the shield) that is now integrated into the helmet shell itself. The ABP homologation was written to reduce the risk of injury from debris or other objects striking a driver’s head. Arai GP-7SRC ABP 8860-2018 Carbon Fiber Ventilation Three large, close-able, intake vents combined with larger 10mm holes and two additional exhaust vents in the center of the helmet greatly increase air flow. A redesigned exhaust cowling improves aerodynamics, drawing out hot air escaping the helmet. The GP-7SRC comes with all vents unattached so you can customize the vent configuration to your specific needs. Arai Positive Shield Latch Arai's positive latch mechanism provides solid shield closure while allowing normal operation of the shield. Designed as an integral component of the shield system, not just an add-on afterthought, its functional simplicity belies the complexity of the design. Installed HANS Post Anchors Included Integrated seats accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepts a variety of anchor systems, making installation easy. The flat surface around the mounting nut allows the anchor post to rest flush on the helmet surface. Arai's Most Advanced ABP Carbon Fiber Shell Available in sizes XS through Large. Arai's proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance while keeping weight and bulk to a minimum. Eject-Ready Crown Pad Pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system. Drink Tube Compatible The GP-7SRC chin liner is now more easily removed to install a drink tube into the liner. The chin liner comes standard with four different drink hose placements. This helmet will ship with signature required for delivery.

Bell HP77 8860-2018 Carbon Fiber Helmet Bell Helmets Championship Pedigree Auto Racing Helmet Based on Bell’s highly successful F1 World Champion proven HP7 design, the Bell HP77 8860-2018 provides the latest impact protection by lowering the visor opening 12 mm and reinforcing the front of the helmet with advanced ballistic protection (ABP). The HP77 is the most advanced FIA8860-2018 helmet in Bell’s line-up, setting a new standard for lightweight, aerodynamically superior carbon fiber helmet performance to meet the intense demands of open-wheel and open-cockpit racing. The Bell HP77 carbon fiber helmet is homologated to the FIA 8860-2018 ABP standard, the most rigorous sport helmet standard on the planet. The Bell HP77 carbon fiber helmet was designed for professional formula racers competing at the highest levels of the sport and for any other racing driver who considers safety of paramount importance. Bell HP77 8860-2018 Carbon Fiber Helmet Details: Homologation: FIA8860-2018 ABP Visor opening lowered 12 mm adding ballistic protection from medium-size debris High-strength and high-modulus carbon fiber shell Advanced multi-density, multi-piece liner for energy absorption and impact performance Optical-grade injection molded Double Screen Anti-Fog (DSAF) visor Top and chin bar ventilation system with 12 intake and exhaust channels Shell and shield design optimized for aerodynamic performance Integrated channels for drink tube and radio systems Top spoiler, top and chin bar gurneys available separately Factory-installed HANS anchors HP helmet bag included Color: Matte Carbon Fiber Finish Sizes: 54cm to 59+ Compatible Shields: SE077 Shield Pivot Kit: SV (SE07, SE077) Bell HP77 Interior Fabric Color Options: Custom interior fabric is available in Black, White, Red, Tan, Purple, Blue, Green or Neon Yellow. These are special order, additional charges will apply. Grey interior fabric is standard.

Arai GP-7SRC 8860-2018     The new Arai GP-7SRC Carbon Fiber 8860-2018 auto racing helmet is a stunning example of Arai’s vision and technological mastery, engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary carbon fiber weave that combines its existing properties of high strength and extreme light weight. Arai's proprietary carbon fiber has a property that standard carbon fiber does not possess: flexibility. (Standard carbon fiber tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of high end closed-cockpit racing. The remaining list of Arai GP-7SRC features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The Arai GP-7SRC carbon fiber auto racing helmet meets or exceeds the latest FIA 8860-2018 homologation standards.  Additional Helmet shields for the Arai GP-7SRC helmet available here Ventilation Is Strong in the Arai GP-7SRC Carbon Large, closable intake vents combined with a 10mm vent greatly increase air intake. Larger 10mm rear vent hole increases air flow further compared to previous models. Arai's Innovative Positive Shield Latch Positive latch mechanism provides solid shield latching while allowing normal operation of the shield. Designed to be an integral component of the shield system, not just an add-on afterthought. Simplicity of the function belies the complexity of the design. Integrated HANS Post Anchors Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepst a variety of anchor systems, making installation much easier. Flat surface area around the mounting nut allows the anchor post base to rest flush with the helmet surface. Proprietary Carbon Fiber Shell Construction Proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance and keep weight and size to a minimum. Eject-Ready Crown Pad Integrates Exceptional Safety A pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system. Extremely Flexible Drink Tube Compatibility The GP-7SRC chin liner is easily removed to install a drink tube into the liner. The chin liner comes standard with four different drink hose placements. Add a Competition Motorsport Performance Racing Helmet Bag to keep your new Arai GP-7SRC Carbon Fiber helmet safe and secure throughout every race weekend. Getting The Best Fit for Your Arai GP-7SRC Carbon The Arai GP-7SRC 8860-2018 is available in sizes XS to Large. The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Bell HP7 EVO-IV Carbon Fiber FIA 8860-2018 Helmet Pre-order: Ships after Q3. The Bell Racing Helmet Designed to FIA Super Helmet Standards Developed through close collaboration with leading F1 drivers and teams, the carbon fiber Bell HP7 EVO-IV is aerodynamically sleek, lightweight and efficient, designed to excel under the intense demands of open-wheel and open-cockpit racing. The updated Bell Bell HP7 EVO-IV meets the FIA's FIA8860-2018 "super helmet" standard, the most advanced sport helmet standard in the world. Designed for professional drivers competing at the highest levels of motorsports, the Bell HP7 EVO III Carbon Fiber helmet allows racers to take advantage of technological innovations like aerospace composite materials and advanced energy absorbing liner systems. Bell HP7 EVO-IV Carbon Fiber FIA 8860-2018 Helmet Details: Manufacturer: Bell Helmets Model number: 11010xx Construction: High-strength and high-modulus carbon fiber ultra-light shell Color: Carbon, Matte Finish Homologation: FIA 8860-2018 Sizes: 54cm to 61+cm Interior: Advanced multi-density, multi-piece liner Visor: Optical-grade SE07 Double Screen Anti-Fog (DSAF) Ventilation: Top and chin bar ventilation system with 12 intake and extraction channels Bell HP7 EVO-IV Carbon Fiber Additional Features: Shell and shield optimized for aerodynamic performance, low internal noise, and impact energy management Integrated channels to install drink tube and radio systems Available with or without duckbill (chin spoiler) Top spoiler, top and chin bar gurneys available separately Factory installed HANS anchors included Add a Competition Motorsport Performance Racing Helmet Bag to keep your new Bell HP7 Carbon Fiber helmet safe and secure throughout each a race weekend. Bell HP7 EVO-IV Carbon Fiber FIA 8860-2018 Helmet Interior Colors Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order, additional charges will apply). Grey interior is standard. This helmet will ship with signature required for delivery.

Bell HP7 EVO III Carbon Fiber FIA 8860-2018 Helmet The Bell Racing Helmet Designed to FIA Super Helmet Standards Developed through close collaboration with leading F1 drivers and teams, the carbon fiber Bell HP7 EVO III is aerodynamically sleek, lightweight and efficient, designed to excel under the intense demands of open-wheel and open-cockpit racing. The updated Bell HP7 EVO-III meets the FIA's FIA8860-2018 "super helmet" standard, the most advanced sport helmet standard in the world. Designed for professional drivers competing at the highest levels of motorsports, the Bell HP7 EVO III Carbon Fiber helmet allows racers to take advantage of technological innovations like aerospace composite materials and advanced energy absorbing liner systems. Bell HP7 Carbon Fiber FIA 8860-2018 Helmet Details: Manufacturer: Bell Helmets Model number: 11010xx Construction: High-strength and high-modulus carbon fiber ultra-light shell Color: Carbon, Matte Finish Homologation: FIA 8860-2018 Sizes: 54cm to 61+cm Interior: Advanced multi-density, multi-piece liner Visor: Optical-grade SE07 Double Screen Anti-Fog (DSAF) Ventilation: Top and chin bar ventilation system with 12 intake and extraction channels Bell HP7 EVO III Carbon Fiber Additional Features: Shell and shield optimized for aerodynamic performance, low internal noise, and impact energy management Integrated channels to install drink tube and radio systems Available with or without duckbill (chin spoiler) Top spoiler, top and chin bar gurneys available separately Factory installed HANS anchors included Add a Competition Motorsport Performance Racing Helmet Bag to keep your new Bell HP7 Carbon Fiber helmet safe and secure throughout each a race weekend. Bell HP7 Carbon Fiber FIA 8860-2018 Helmet Interior Colors Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order, additional charges will apply). Grey interior is standard. This helmet will ship with signature required for delivery.

Bell Helmets HP6 EVO-II RD-4C/EC Carbon Fiber Racing Helmet Pre-order: Ships after Q3. The Bell HP6 EVO-II RD-4C/EC is built for serious racers who demand uncompromising safety and performance. Using technology straight from Bell’s flagship HP7, this FIA 8860-2018 homologated helmet is engineered for closed-cockpit competition with advanced materials, integrated comms, and hydration capabilities all in one sleek carbon shell. Bell HP6 EVO-II RD-4C/EC 8860-2018 Carbon Fiber Helmet Details Manufacturer: Bell Helmets Construction: Full advanced carbon fiber shell, ultra-lightweight Exterior: Matte carbon finish Interior: Dark grey, high-strength FR comfort fabric Homologation: FIA 8860-2018 Factory-installed HANS anchors Integrated hydration system and electronic ear cup speakers Comes with Bell HP helmet bag Shield: Bell SV06 DSAF Features & Options Wide eye port for maximum visibility in closed-cockpit cars Advanced multi-density, multi-piece liner for impact protection Integrated channels for drink tube and radio systems Extraction vents improve airflow and cooling Optional interior color customization (Tan, White, Red, Purple, Blue, Green, Neon Yellow by special order) Top forced-air intake can be installed left or right to connect with external cooling systems Forced air kits available, including Quick Lock (V10), Maglock compatible Optional ear cups for enhanced noise insulation What’s In The Box Bell HP6 EVO-II RD-4C/EC 8860-2018 Carbon Fiber Helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key Bell HP6 8860-2018 FAQs Is the Bell HP6 RD-4C/EC helmet FIA approved? Yes, it carries the FIA 8860-2018 homologation, the highest standard for helmet safety in motorsports. Does this helmet include built-in communication? Yes, it comes with integrated electronic ear cup speakers and hydration system pre-installed from the factory. Can I use this helmet with a cooling system? Absolutely. The helmet is compatible with Bell’s top forced-air intakes and works with Quick Lock and Maglock connections. What type of shield does the HP6 use? The helmet includes a clear SE06 3mm DSAF shield, with tinted and iridium options available separately. Step up to the Bell HP6 EVO-II RD-4C/EC 8860-2018 Carbon Fiber Racing Helmet and experience uncompromised visibility, safety, and performance on track.

Bell Helmets HP6 EVO-II RD-4C Carbon Fiber Racing Helmet Pre-order: Ships after October 1, 2025. Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 EVO-II RD-4C 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 114101X Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Integrated Hydration and Electronics for ear buds (ear buds not included) Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 RD-4C 8860-2018 Features & Options Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 EVO-II RD-4C 8860-2018 Carbon Fiber Helmet Bell HP6 EVO-II 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell HP10 Rally Helmet  Introducing the Bell HP10 Rally helmet - the epitome of advanced helmet technology, drawing inspiration from Bell's esteemed HP7 Advanced Helmets. Proudly FIA 8860-2018 approved, this modern masterpiece is not just an open-face rally helmet; it's a statement of performance. Crafted with an ultra-lightweight carbon shell, it features a quick-detach Half Chin Bar (HCB), adjustable carbon fiber peak, and a state-of-the-art adjustable integrated sunscreen. Prioritizing both comfort and sound insulation, it stands as the go-to choice for rally drivers and co-drivers aiming for the pinnacle of their craft. Bell Racing Helmets dedicated R&D team collaborated with audio experts and elite rally drivers, ensuring unparalleled sound insulation and communication. Embedded with ZeroNoise® electronics, potent speakers, and a noise-cancelling microphone, the Bell HP10 Rally helmet promises unmatched safety, comfort, and communication.  Bell HP10 Rally Helmet Features Homologation: FIA 8860-2018 Exterior: matte finish carbon fiber Interior: dark grey high-strength Comfort FR® fabric. Open face design with ultra-lightweight advanced full carbon shell. Removable carbon Half Chin Bar (HCB) easily detaches for fast airway access in an emergency. ZeroNoise® electronics, high-power speakers, and noise-cancelling mic integrated in HCB. Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance. Factory installed HANS anchors. Adjustable integrated anti-scratch sunscreens: ML Red Mirror (M10S-Short) installed,  Dark Smoke (M10-Long) supplied in the box. Removable cheek pads with multi-density advanced materials for optimal comfort. Ultra-reliable, heavy duty in-molded female Nexus connector. Adjustable carbon fiber sun peak. Air extraction holes maximize cooling. Bell HP10 Rally Helmet Options Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (each by special order). Adjustable sunscreens available in various colors and two lengths to ensure optimal visual comfort. Sizes (in cm): 54, 55, 56, 57, 58, 59, 60, 61, and 61+.

Bell Helmets HP6 EVO-II  Carbon Fiber Racing Helmet Pre-order: Ships after Q3. Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 EVO-II  8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11400 Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 8860-2018 Features & Options: Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation Bell HP6 8860-2018 Carbon Fiber Helmet FAQs: What certification does the HP6 meet? The helmet is homologated to FIA 8860-2018, the strictest current motorsport helmet standard. Does this helmet come with accessories? Yes, it includes a clear SE06 DSAF shield (installed), Bell HP helmet bag, tear-off posts, and a hex wrench key. Can the HP6 be used with a cooling system? Yes, the top ventilation slots accept forced-air kits, compatible with Maglock quick disconnects. Are interior color options available? Yes, Bell offers alternative colors such as Tan, White, Red, Purple, Blue, Green, and Neon Yellow by special order. In The Box of Your Bell HP6 8860-2018 Carbon Fiber Helmet: Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell Helmets HP6 8860-2018 RD-4C/EC Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 RD-4C/EC 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11410X Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Integrated Hydration and Electronic Ear Cup Speakers Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 RD-4C/EC 8860-2018 Features & Options: Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 RD-4C/EC 8860-2018 Carbon Fiber Helmet: Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell Helmets HP6 8860-2018 RD-4C Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 RD-4C 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11410X Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Integrated Hydration and Electronics for ear buds (ear buds not included) Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 RD-4C 8860-2018 Features & Options Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 RD-4C 8860-2018 Carbon Fiber Helmet Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell HP10 Carbon Open Face Helmet Introducing the Bell HP10 Carbon Open Face Helmet, the ultimate choice for rally racing aficionados seeking uncompromised safety, comfort, and performance. Crafted with precision and innovation, the new HP10 Carbon incorporates the advanced technology of Bell's HP7 state-of-the art Advanced Helmets in a sleek and modern design that provides the ultimate open-face helmet protection. The Bell HP10 Carbon features an ultra-lightweight carbon shell, adjustable carbon fiber peak, brand new adjustable integrated sunscreen, and highly comfortable professional fit. The HP10 is perfect for racers who want the feeling of an open-face helmet but demand outstanding comfort and superior performance. Constructed from advanced high-strength carbon fiber, the HP10 Carbon boasts exceptional strength and durability while remaining incredibly lightweight. This means you can race comfortably for extended periods without the burden of a heavy helmet. Its open face design provides optimal visibility, allowing you to stay fully aware of your surroundings and make split-second decisions on the challenging terrain encountered during rally races. The HP10 Carbon also features a superior ventilation system, ensuring a constant flow of fresh air to keep you cool and focused on conquering the toughest off-road stages. With its FIA 8860-2018 certification, the Bell HP10 Carbon Open Face Helmet provides the peace of mind that you're equipped with top-tier protection, meeting the strictest safety standards for motorsports. Elevate your rally racing experience with this premium helmet that merges style, comfort, and unmatched safety, making it the ideal choice for off-road racing enthusiasts who demand the best. Bell HP10 Helmet Features Homologation: FIA 8860-2018 approved. Exterior: matte finish carbon fiber. Interior: dark grey high-strength Comfort FR® fabric. Ultra-lightweight advanced full carbon shell. Factory-installed HANS anchors. Multi-density, multi-piece liner maximizes energy absorption and impact performance. Adjustable carbon fiber sun peak. Adjustable integrated anti-scratch sunscreen: ML Red mirror (M10S-Short) installed plus Dark Smoke (M10-Long) in the box. Removable cheek pads with multi-density materials for optimal comfort. Flexible sound-insulating ear muffs provide excellent sound insulation. Air extraction holes maximize cooling. Bell HP10 Carbon Open Face Helmet Options Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (each by special order). Adjustable sunscreens available in various colors and two lengths to ensure optimal visual comfort. Bell HCB (Half Chin Bar) compatible. Sizes (in cm): 54, 55, 56, 57, 58 ,59, 60, 61, and 61+.

Bell Helmets HP6 8860-2018 Carbon Fiber Racing Helmet Incorporating technology used in Bell's state-of-the-art HP7 Advanced Helmet, the Bell HP6 is homologated to the latest FIA 8860-2018 standards. With its modern and aggressive design, the Bell HP6 was developed especially for racers in closed-cockpit environments. The Bell HP6 combines a wide eye port, for extended vision, with an ultra-lightweight advanced carbon fiber shell. Its ventilation slots can be connected to various types of air intakes drawing air from external cooling systems. The HP6 can also be fitted with optional ear cups providing optimal noise insulation. Fully-integrated radio communication and hydration systems are available. Bell HP6 8860-2018 Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part no.: 11400 Construction: full advanced carbon fiber shell Exterior Color: carbon, matte finish Interior: dark grey high strength, high comfort FR fabric Homologation: FIA 8860-2018 Factory installed HANS anchors: yes Bell HP helmet bag: yes Shield: Bell SV06 DSAF Bell HP6 8860-2018 Features & Options: Wide eye port for extended vision in closed-cockpit cars Advanced multi-density, multi-piece liner Integrated channels for drink tube and radio systems Extraction vents maximize air circulation Alternative interior colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order, additional cost) Top forced air intake can be installed on left or right top side vents to connect an external cooling system Forced air kits available including Quick Lock (V10), fully compatible with Maglock Optional ear cups for increased noise insulation In The Box of Your Bell HP6 8860-2018 Carbon Fiber Helmet: Bell HP6 8860-2018 Carbon Fiber helmet Clear SE06 3mm DSAF shield (installed) Bell HP helmet bag Plastic tear-off posts (installed) Hex wrench key

Bell RS7C LTWT Carbon Fiber Helmet SA2025 This is a pre-order, shipping after Q3 2025. Cutting-Edge Protection in a Lightweight Package Based on the design of the range-topping Bell HP7, the Bell RS7 LTWT features an extraordinary lightweight carbon-composite shell made using Bell’s high-pressure proprietary molding system. The Bell RS7 LTWT Carbon's innovative shell and shield design improve acoustic comfort, aerodynamic performance, and energy absorption. The Double Screen Anti-Fog (DSAF) shield and rubber eye port gasket ensure air, water, and dust don't enter the helmet. Bell RS7C LTWT Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part number: 1237A Certification: Snell SA2025 and FIA 8859-2024 Construction: aerospace grade ultra-light carbon fiber shell Color: carbon matte clear Shield: Bell 3mm SE07 Shield included: clear optical-grade injection molded Double Screen Anti-Fog (DSAF) Sizes: 54cm to 61cm+ HANS anchors: factory installed Ear cups: included Pivot kit: SV(SE07, SE077) Bell RS7C LTWT Additional Features: Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance Multi-purpose fitment system with or without included ear cups Top and chin bar ventilation system with 14 intake and extraction channels Interior ventilation channels maximize air flow Shell and shield optimized to improve aerodynamic performance Integrated channels for drink tube and radio systems Top spoiler, top gurney and chin-bar gurney available separately Top air attachments available separately Additional Bell RS7C LTWT Carbon Fiber helmet shields available here

Bell RS7C LTWT Carbon Fiber Helmet SA2020 Cutting-Edge Protection in a Lightweight Package Based on the design of the range-topping Bell HP7, the Bell RS7 LTWT features an extraordinary lightweight carbon-composite shell made using Bell’s high-pressure proprietary molding system. The Bell RS7 LTWT Carbon's innovative shell and shield design improve acoustic comfort, aerodynamic performance, and energy absorption. The Double Screen Anti-Fog (DSAF) shield and rubber eye port gasket ensure air, water, and dust don't enter the helmet. Bell RS7C LTWT Carbon Fiber Helmet Details: Manufacturer: Bell Helmets Manufacturer part number: 1237A Certification: Snell SA2020 Construction: aerospace grade ultra-light carbon fiber shell Color: carbon matte clear Shield: Bell 3mm SE07 Shield included: clear optical-grade injection molded Double Screen Anti-Fog (DSAF) Sizes: 54cm to 61cm+ HANS anchors: factory installed Ear cups: included Pivot kit: SV(SE07, SE077) Bell RS7C LTWT Additional Features: Advanced multi-density, multi-piece liner maximizes energy absorption and impact performance Multi-purpose fitment system with or without included ear cups Top and chin bar ventilation system with 14 intake and extraction channels Interior ventilation channels maximize air flow Shell and shield optimized to improve aerodynamic performance Integrated channels for drink tube and radio systems Top spoiler, top gurney and chin-bar gurney available separately Top air attachments available separately Additional Bell RS7C LTWT Carbon Fiber helmet shields available here