Wholesale Distribution

Alpinestars Tech-1 KX v3 Karting Shoes The Alpinestars Tech-1 KX v3 Karting Shoes combine Formula 1-inspired construction, lightweight comfort, and precise pedal sensitivity for competitive kart racing. Their anatomically profiled design provides a close, supportive fit while reducing unnecessary bulk around the foot. An advanced seamless thermo-welded upper uses an ultra-thin polyurethane film over breathable 3D mesh. This construction reduces conventional seams and potential pressure points while improving flexibility, ventilation, and long-session comfort. The revised asymmetric closure system combines adjustable support with Alpinestars’ wire-tightening technology. Drivers can fine-tune the fit across the foot for dependable stability during hard braking, rapid throttle transitions, and demanding race conditions. Seamless Thermo-Welded Construction The Tech-1 KX v3 uses an advanced thermo-welded upper that reduces bulky stitched seams. An ultra-thin protective film reinforces the structure while allowing the shoe to remain lightweight and flexible. The streamlined construction helps minimize pressure points and creates a smooth, close-fitting profile suitable for tightly spaced kart pedals. Breathable 3D Mesh Upper Breathable 3D mesh promotes airflow around the foot, helping reduce heat buildup during long races, practice sessions, and warm-weather karting events. Laser-cut ventilation openings and perforated sections further improve air circulation without compromising the shoe’s supportive structure. Revised Asymmetric Closure System The asymmetric closure follows the natural shape of the foot for a secure and personalized fit. Adjustable straps work with Alpinestars’ wire closure system to distribute tension evenly across the upper. This design helps reduce unwanted foot movement while eliminating the bulk of a traditional centered lacing system. External Heel and Ankle Support Reinforcement around the heel and ankle provides additional stability during hard braking and aggressive pedal transitions. The supportive structure helps keep the rear of the foot securely positioned without restricting normal ankle movement. Internal Toe Reinforcement An internal reinforced toe area provides protection against impacts and repeated contact with the kart, pedals, and chassis components. Superlight Tongue and Padded Collar A lightweight tongue reduces material across the top of the foot, while soft collar padding improves comfort around the ankle. The microfiber collar helps reduce irritation during extended wear. Thin Performance Outsole The exclusive lightweight rubber outsole is designed to maximize pedal sensitivity. Its thin profile allows drivers to feel subtle changes in brake pressure and throttle position for more precise control. The specialized compound also provides dependable grip on kart pedals and trackside surfaces. Alpinestars Tech-1 KX v3 Karting Shoe Features Advanced Formula 1-inspired karting shoe construction Seamless thermo-welded upper Ultra-thin polyurethane reinforcement film Breathable 3D mesh panels Laser-cut ventilation openings Anatomically profiled performance fit Revised asymmetric closure system Alpinestars wire-tightening closure Adjustable support straps External heel reinforcement Supportive ankle construction Internal reinforced toe area Superlight tongue Soft microfiber ankle collar Comfortable collar padding Lightweight rubber outsole Thin sole profile for precise pedal feel Designed for competitive indoor and outdoor karting Technical Specifications Product: Alpinestars Tech-1 KX v3 Karting Shoes Manufacturer: Alpinestars Product Type: Kart racing shoes Upper Construction: Seamless thermo-welded structure Upper Materials: Ultra-thin polyurethane film and breathable 3D mesh Ventilation: Laser-cut openings and perforated panels Closure: Asymmetric adjustable strap and wire system Heel Protection: External reinforced heel structure Ankle Protection: Supportive external reinforcement Toe Protection: Internal reinforced toe area Collar: Soft microfiber with lightweight padding Outsole: Thin lightweight rubber karting sole Alpinestars Tech-1 KX v3 Karting Shoe Size Chart Frequently Asked Questions What type of racing are the Alpinestars Tech-1 KX v3 shoes designed for? The Tech-1 KX v3 is designed specifically for kart racing, including competitive indoor and outdoor karting. How does the wire closure system work? The wire system evenly tightens the shoe around the foot, allowing fast and precise fit adjustments without relying entirely on traditional laces. Are the Alpinestars Tech-1 KX v3 shoes breathable? Yes. The upper combines 3D mesh, perforated sections, and laser-cut ventilation openings to promote airflow around the foot. Do the Tech-1 KX v3 shoes provide good pedal feel? Yes. The thin lightweight rubber outsole is designed to provide direct feedback through the brake and throttle pedals. What is the benefit of the seamless upper? The thermo-welded construction reduces bulky stitched seams and potential pressure points while maintaining support, flexibility, and durability. Do the shoes provide heel and ankle support? Yes. Reinforced heel and ankle areas help stabilize the foot during hard braking and rapid pedal transitions. Are these shoes comfortable for long karting sessions? Yes. The breathable upper, padded collar, lightweight tongue, and anatomically shaped construction are designed to reduce heat and pressure during extended sessions. Can the Tech-1 KX v3 be used for indoor karting? Yes. The breathable construction, secure fit, and responsive sole make it suitable for indoor kart racing and league competition. Can these shoes be used for auto racing? The Tech-1 KX v3 is designed for karting. Drivers competing in auto racing should use fire-resistant footwear approved to the standard required by their racing organization. How should the Alpinestars Tech-1 KX v3 fit? The shoes should fit snugly around the heel and midfoot without painful pressure points. The toes should have a small amount of room while wearing the socks normally used for racing. How should the Tech-1 KX v3 Karting Shoes be cleaned? Clean the exterior with a soft damp cloth and mild soap, then allow the shoes to air dry naturally. Do not machine wash, submerge them in water, or expose them to direct heat. Lightweight Karting Performance and Precise Control The Alpinestars Tech-1 KX v3 Karting Shoes combine breathable seamless construction, a secure wire closure, reinforced protection, and a thin performance outsole. Their lightweight design and close anatomical fit make them an excellent choice for kart racers seeking comfort, stability, and accurate pedal feedback.

Alpinestars SP v3 Racing Shoes The Alpinestars SP v3 Racing Shoes deliver a refined combination of comfort, protection, and responsive pedal control for competitive auto racing. An anatomically profiled design provides a secure performance fit, while the lightweight racing outsole helps drivers maintain precise control over the brake, throttle, and clutch pedals. The premium suede upper offers excellent flexibility, durability, and comfort. Perforated suede across the tongue improves airflow, helping reduce heat buildup during demanding sprint races, endurance events, autocross, HPDE sessions, and track days. A heat-resistant para-aramidic fiber lining adds strength and protection without unnecessary weight. Lightweight microporous padding around the heel and insole provides additional cushioning, while the reinforced heel counter improves lateral stability under braking and rapid pedal transitions. Premium Suede Construction The SP v3 upper is constructed from premium suede selected for its balance of flexibility, durability, and comfort. Its soft construction allows the shoe to conform closely to the foot while maintaining the support required for accurate pedal operation. Anatomically Profiled Fit Alpinestars uses an anatomically shaped design to create a close, responsive fit around the foot. This streamlined profile helps reduce unnecessary movement inside the shoe and makes it easier to operate closely spaced racing pedals. Improved Ventilation Perforated suede on the tongue promotes airflow through the shoe. The breathable construction helps manage heat and moisture during long driving sessions without adding bulky ventilation materials. Heat-Resistant Para-Aramidic Lining A para-aramidic fiber tubular lining provides excellent heat resistance, structural strength, and lightweight protection. The lining surrounds the foot while maintaining the flexibility needed for smooth and precise pedal inputs. Lightweight Heel and Insole Padding Microporous padding around the heel and insole improves comfort while keeping weight to a minimum. This cushioning helps reduce pressure and fatigue during extended periods behind the wheel. Reinforced Heel Support A compressed leather heel counter reinforces the rear of the shoe for improved protection and lateral stability. This supportive construction helps keep the heel properly positioned during hard braking and quick pedal transitions. Supportive Underfoot Construction A polypropylene lasting board works with leather reinforcement to provide underfoot support and comfort. The structure helps distribute pressure while preserving the sensitivity required from a professional racing shoe. Responsive Alpinestars Racing Sole The exclusive Alpinestars racing outsole uses a lightweight rubber compound with a textured grip pattern. Its low-profile construction provides dependable pedal traction and direct feedback through the brake, throttle, and clutch pedals. Alpinestars SP v3 Racing Shoe Features Premium suede upper for flexibility, comfort, and durability Anatomically profiled racing fit Perforated suede tongue for improved ventilation Heat-resistant para-aramidic fiber tubular lining Lightweight microporous heel and insole padding Compressed leather heel counter Improved lateral stability and heel support Polypropylene lasting board Leather underfoot reinforcement Lightweight Alpinestars rubber racing outsole Textured sole pattern for dependable pedal grip Low-profile design for responsive pedal feedback FIA 8856-2018 homologated Technical Specifications Product: Alpinestars SP v3 Racing Shoes Manufacturer: Alpinestars Upper Material: Premium suede Tongue: Perforated suede Lining: Para-aramidic fiber tubular construction Padding: Lightweight microporous material Heel Counter: Reinforced compressed leather Lasting Board: Polypropylene with leather reinforcement Outsole: Lightweight textured rubber racing sole Certification: FIA 8856-2018 Alpinestars SP v3 Racing Shoes Sizing Chart Frequently Asked Questions Are the Alpinestars SP v3 Racing Shoes FIA approved? Yes. The Alpinestars SP v3 Racing Shoes are homologated to the FIA 8856-2018 standard. Drivers should confirm the current footwear requirements for their racing organization, class, and event. What are the Alpinestars SP v3 Racing Shoes made from? The upper is constructed from premium suede with a perforated suede tongue. The interior uses a heat-resistant para-aramidic fiber tubular lining. How do the Alpinestars SP v3 Racing Shoes fit? The SP v3 has an anatomically profiled, performance-oriented fit designed to hold the foot securely and improve pedal feedback. Racing shoes should fit snugly without causing painful pressure points or restricting circulation. Are the Alpinestars SP v3 Racing Shoes breathable? Yes. Perforations in the suede tongue help circulate air through the shoe and reduce heat buildup during demanding driving sessions. Do the SP v3 Racing Shoes provide good pedal feel? Yes. The lightweight, low-profile rubber outsole is designed to provide direct pedal feedback, while its textured grip pattern helps maintain secure contact with the pedals. What does the reinforced heel counter do? The compressed leather heel counter supports the rear of the foot and improves lateral stability during hard braking, shifting, and rapid pedal transitions. Are these shoes suitable for HPDE and track days? Yes. Their secure fit, breathable construction, supportive heel, and responsive outsole make them suitable for professional competition, club racing, autocross, time trials, HPDE events, and track-day driving. Can the Alpinestars SP v3 be used for karting? The SP v3 can be worn for some karting applications, but it is designed and certified as an auto racing shoe. Karting-specific footwear may provide an outsole better suited to walking through kart paddocks and pit areas. How should I care for suede racing shoes? Allow the shoes to air dry naturally after use and keep them away from direct heat. Use a soft suede brush for light cleaning and avoid unnecessary walking on gravel, rough pavement, or other abrasive surfaces. Comfort, Protection, and Precise Pedal Control The Alpinestars SP v3 Racing Shoes combine premium suede, breathable construction, lightweight cushioning, reinforced heel support, and a responsive racing outsole. Their FIA-approved design provides the comfort, control, and protection required by competitive drivers and serious track-day enthusiasts.

Alpinestars ZX EVO v3 Underlayer Pants Looking for high-performance gear that’s as serious about safety as you are? Meet the Alpinestars ZX EVO V3 Bottom—a Formula 1-specification base layer that goes beyond the basics. This isn’t just underwear; it’s a layer of lightweight armor against heat and flame, crafted with LENZING™ FR. This unique, eco-friendly fiber doesn’t just protect; it’s also designed to keep you cool, dry, and comfortable even when the pressure heats up.   Alpinestars ZX EVO v3 Underlayer Pants Features & Benefits Next-Level Flame Resistance The ZX EVO V3 Bottom uses LENZING™ FR, a top-tier cellulosic fiber that permanently protects against heat transfer, so you stay safe from fire hazards. Soft as a Cloud Alpinestars knows comfort is key, so they made this base layer ultra-thin, lightweight, and soft. Think of it as a second skin but one built for speed. Breathability that Lasts With jacquard mesh and diamond construction, this layer provides stretch-fit comfort and increased ventilation. You’ll feel the airflow, even under a racing suit. Moisture-Wicking Magic The fabric pulls sweat away from your skin, keeping you cooler for longer so you can stay laser-focused on the track. Picture this It’s race day. You’ve suited up, and under all the layers, the ZX EVO V3 Bottom is working overtime to keep you cool and collected. Every shift, every corner, you’re focused on the track—not on discomfort. The lightweight, seamless design ensures no annoying bunching or pinching, giving you one less thing to think about as you take on the competition. Alpinestars ZX EVO v3 Underlayer Pants Product Specifications Material LENZING™ FR cellulosic fiber for flame resistance and thermal insulation Weight 255g/sqm, keeping weight low and comfort high Construction Jacquard mesh with diamond structure, designed for breathability and optimal fit Protection Certified to FIA 8856-2018 & SFI 3.3 standards, meeting racing’s toughest safety certifications Alpinestars ZX EVO v3 Underlayer Pants FAQs: Is this base layer suitable for all racing events?Absolutely. With FIA 8856-2018 and SFI 3.3 certifications, the ZX EVO V3 Bottom is approved for both amateur and professional racing. How does it compare to regular base layers?Unlike standard options, this F1-spec underwear combines advanced flame resistance, moisture-wicking, and lightweight comfort, giving you premium protection without the bulk. Does it run true to size?Yes! Alpinestars optimized the fit with a revised pattern that conforms to your shape, ensuring maximum comfort. So, are you ready to race with confidence, comfort, and peace of mind? Add the Alpinestars ZX EVO V3 Bottom to your cart and experience the difference top-level racing underwear makes.

Alpinestars Race v3 Nomex Underlayer Shirt This lightweight Nomex® undergarment gives you exceptional breathability and comfort, along with flame-resistant properties. The Race v3 Series Formula 1 specification tech base layer incorporates a relaxed fit for comfort when wearing under a driving suit. ALPINESTARS RACE V3 NOMEX UNDERLAYER SHIRT CONSTRUCTION Advanced tech base layer with Alpinestars innovative flame-resistant technology incorporating elastane fiber for improved engineered elasticity and high levels of comfort. Stretchable construction under the new homologation standard requirements.  ALPINESTARS RACE V3 NOMEX UNDERLAYER SHIRT PROTECTION  Certified to the new FIA 8856-2018 homologation standard. Lenzing FR® fire-resistant material ALPINESTARS RACE V3 NOMEX UNDERLAYER SHIRT KEY FEATURES Soft-touch textile for feel and enhanced comfort. Lenzing FR® material is a natural viscose fiber with unique thermal insulation and flame resistance properties that help prevent heat stress.

Alpinestars Tech-1 ZX v3 Nomex Racing Gloves The Alpinestars Tech-1 ZX v3 Nomex Racing Gloves are engineered for professional drivers who demand exceptional protection, precise steering-wheel feel, and lasting comfort. Developed with leading Formula 1 and endurance racing drivers, the latest Tech-1 ZX generation introduces an advanced dual-sided honeycomb construction designed to improve heat protection and breathability. The new honeycomb Nomex top layer delivers nearly a 20% improvement in heat transmission performance compared with the previous generation. This enhanced protection is achieved without sacrificing the close fit, flexibility, and control that have made the Tech-1 ZX one of Alpinestars’ premier racing gloves. Advanced Honeycomb Nomex Construction The Tech-1 ZX v3 uses a breathable, flame-resistant aramidic fiber main construction with a bonded aramidic lining. This two-layer honeycomb assembly helps regulate temperature while providing the protection required for high-level motorsport competition. The lightweight construction reduces bulk around the hands, allowing the driver to maintain a natural connection with the steering wheel and cockpit controls during long races and demanding track sessions. Alpinestars Tech-1 ZX v3 Glove Features Certified to the FIA 8856-2018 homologation standard Advanced dual-sided honeycomb aramidic fiber construction Bonded aramidic lining for improved comfort and temperature control Nearly 20% improved heat transmission performance External seams for reduced pressure points and enhanced comfort Pre-curved fingers and palm for a natural driving position Ergonomic 3D silicone grip technology on the palm and fingers Strategically positioned grip pattern for flexibility and control Outer grip zones for precise cockpit control Touchscreen-compatible thumb and index fingertip Improved Grip and Steering-Wheel Feel A newly developed 3D silicone print is applied across the palm and fingers to provide secure grip with less printed surface area. This reduced pattern helps preserve flexibility and steering-wheel feel while still delivering dependable control under demanding racing conditions. Additional grip zones are positioned along the outer areas of the glove to improve contact with switches, paddles, and other cockpit controls. Pre-Curved Fit and External Seams The pre-curved shape has been increased from the previous version to better match the natural position of the hands while holding the steering wheel. This helps reduce material bunching, improves fit, and minimizes hand fatigue during extended driving sessions. External seams remove bulky stitching from the inside of the fingers, reducing pressure points and improving overall comfort and sensitivity. Touchscreen Compatibility The thumb and index fingertip are touchscreen compatible, allowing drivers to operate phones, tablets, data systems, and other touch-sensitive devices without removing their gloves. Alpinestars Tech-1 ZX v3 Nomex Gloves Sizing Chart Alpinestars Tech-1 ZX v3 Nomex Racing Gloves FAQs Are the Alpinestars Tech-1 ZX v3 Gloves FIA approved?Yes. The Tech-1 ZX v3 Gloves are certified to the FIA 8856-2018 homologation standard for fire-resistant motorsport apparel. What is the benefit of the honeycomb Nomex construction?The dual-sided honeycomb aramidic construction improves breathability and heat protection while maintaining a lightweight and flexible feel. How much has heat protection improved?Alpinestars states that the new honeycomb top layer provides nearly a 20% improvement in heat transmission performance compared with the previous generation. Why do these gloves use external seams?External seams reduce pressure points inside the fingers and provide a smoother, more comfortable fit while driving. Are the Tech-1 ZX v3 Gloves touchscreen compatible?Yes. The thumb and index fingertip are designed to work with compatible touchscreen devices. Do the gloves have a pre-curved fit?Yes. The fingers and palm are pre-curved to follow the natural position of the hands on the steering wheel, reducing bunching and fatigue.

Alpinestars Tech-1 Race v4 Nomex Racing Gloves The Alpinestars Tech-1 Race v4 Nomex Racing Gloves deliver premium comfort, dependable steering-wheel grip, and certified fire-resistant protection at an accessible price point. Developed for competitive auto racing, the Tech-1 Race v4 combines a lightweight aramid construction with pre-curved fingers, external palm-side seams, and a high-grip silicone surface. An open-cuff design and 180-degree elasticated wrist make the gloves easy to put on while maintaining a secure, streamlined fit. The close anatomical construction improves steering feedback and dexterity when operating paddle shifters, buttons, switches, and other cockpit controls. The Tech-1 Race v4 meets FIA 8856-2018 and SFI homologation requirements, making it suitable for many professional, amateur, endurance, road-racing, and club-level motorsport applications. Pre-Curved Racing Fit The fingers are pre-curved to follow the natural shape of the hand around the steering wheel. This ergonomic construction reduces resistance through the fingers and helps the driver maintain a relaxed grip during qualifying laps, sprint races, and extended driving sessions. The close-fitting design also reduces excess material around the fingertips, improving dexterity and steering-wheel sensitivity. External Palm-Side Seams External seams along the palm side of the fingers move bulky stitching away from the primary pressure areas inside the glove. This creates a smoother interior surface and helps reduce discomfort while gripping the steering wheel. The seam placement provides a natural feel without sacrificing the durability required for repeated competition use. High-Grip Silicone Palm A silicone grip surface across the palm provides dependable traction against the steering wheel. The low-profile grip pattern improves control during braking, cornering, shifting, and rapid steering inputs while preserving tactile feedback. Enhanced traction allows the driver to maintain control with less gripping pressure, which can help reduce hand fatigue during longer races and track sessions. Open Cuff and Elasticated Wrist The open-cuff design allows quick entry and removal between sessions. A 180-degree elasticated wrist holds the glove securely in place without requiring a bulky external closure. The streamlined wrist construction provides comfortable overlap with the sleeve of a compatible racing suit while maintaining freedom of movement. Flame-Resistant Aramid Construction The Alpinestars Tech-1 Race v4 is constructed from flame-resistant aramid fiber with a bonded aramid lining. This lightweight construction provides certified motorsport protection while maintaining flexibility and comfort. The soft interior lining helps reduce irritation and provides a close, consistent fit during extended use. FIA and SFI-Approved Racing Protection The Alpinestars Tech-1 Race v4 Racing Gloves meet FIA 8856-2018 and applicable SFI homologation standards. These certifications make the gloves suitable for many racing series and sanctioning bodies that require approved fire-resistant driver equipment. Drivers should confirm the required certification with their racing organization before competition. Alpinestars Tech-1 Race v4 Glove Features Fire-resistant auto-racing glove construction Flame-resistant aramid fiber outer material Bonded aramid lining Pre-curved fingers provide a natural driving position External palm-side seams reduce pressure points Silicone palm surface improves steering-wheel grip Close anatomical fit improves dexterity Open-cuff design allows quick entry and removal 180-degree elasticated wrist provides a secure fit Lightweight construction supports long-session comfort FIA 8856-2018 approved SFI homologated Alpinestars Tech-1 Race v4 Specifications Manufacturer: Alpinestars Model: Tech-1 Race v4 Product Type: Auto Racing Gloves Outer Material: Flame-resistant aramid fiber Lining: Bonded aramid lining Palm: High-grip silicone surface Fit: Anatomical with pre-curved fingers Wrist: Open cuff with 180-degree elasticated construction Available Sizes: Small through XX-Large Homologation: FIA 8856-2018 and SFI Ideal for Multiple Motorsport Applications The Alpinestars Tech-1 Race v4 Racing Gloves are suitable for a wide range of motorsport disciplines, including: Circuit racing Endurance racing Sprint racing Sports-car competition Touring-car racing Rally and time trials Autocross Driver instruction HPDE and performance track driving Why Choose Alpinestars Tech-1 Race v4 Gloves? The Tech-1 Race v4 combines many features commonly associated with higher-priced racing gloves, including pre-curved fingers, external palm-side seams, silicone grip material, and a lightweight aramid construction. Its open cuff and elasticated wrist provide quick entry and a secure fit, while the close anatomical design delivers the steering feedback and dexterity required for competitive driving. The result is a comfortable, certified racing glove that provides strong performance and value. Alpinestars Tech-1 Race v4 Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 Race v4 Gloves FIA approved?Yes. The gloves meet the FIA 8856-2018 standard for protective clothing used in automobile competition. Are the Tech-1 Race v4 Gloves SFI approved?Yes. The gloves also meet applicable SFI homologation requirements. Confirm the exact certification required by your racing organization before competition. How should Alpinestars racing gloves fit?They should fit closely around the hands and fingers without restricting movement. There should not be excessive material at the fingertips or uncomfortable pressure across the palm. What is the benefit of the pre-curved fingers?The pre-curved construction follows the natural position of the hand around the steering wheel, improving comfort and helping reduce fatigue. Why are the seams located on the outside?External palm-side seams move bulky stitching away from pressure areas inside the fingers, creating a smoother and more comfortable fit. What type of grip material is used on the palm?The palm features a silicone surface designed to improve steering-wheel traction while maintaining tactile feedback. Do the gloves use a wrist strap?No. The open-cuff design uses a 180-degree elasticated wrist to provide a secure fit without a separate closure strap. Do Alpinestars racing gloves require a break-in period?The gloves may become more flexible and conform more closely to the hands with regular use. They should still fit comfortably when first worn. Should racing gloves be stretched to improve the fit?Do not forcefully stretch the gloves. Select the correct size using the sizing chart and allow the materials to naturally conform during use. Are the Tech-1 Race v4 Gloves suitable for endurance racing?Yes. Their lightweight construction, pre-curved fit, external seams, and silicone palm grip make them suitable for extended driving sessions.

Alpinestars Bionic Rib Protector Lightweight Kart Rib Protection Engineered for Performance Every racer knows the rib cage takes a beating in competitive karting. The Alpinestars Bionic Rib Protector offers precision-engineered, lightweight protection that keeps you comfortable and in control. Designed for both amateur and professional kart drivers, this kart rib protector is ideal for minimizing fatigue while safeguarding against high-impact forces. Whether you're grinding out laps at your local circuit or chasing podiums on the national stage, the Bionic delivers the protection you need without slowing you down. Crafted with a high-density impact-resistant shell and internal bio-foam padding, the Alpinestars Bionic Rib Protector is contoured for a race-focused fit under your kart suit. Adjustable elastic straps ensure a secure, customizable hold, while the ventilated design keeps airflow high during long sessions. It’s the perfect blend of comfort, mobility, and safety—built by a brand trusted across all levels of motorsport. A high-performance, lightweight, ergonomically constructed guard for the ribs and kidneys, the Bionic Rib Support incorporates intelligent adjustment features to offer kart drivers a supremely comfortable, customized and supporting fit. Alpinestars Bionic Rib Protector Construction Technical multi-layered main construction for optimized performance fit, protection and comfort. Advanced, soft poly-lycra inner lining means protection can be worn under or over garment. Dual composition padding incorporating 3mm high density poly-foam layer laminated with 4mm absorption EVA. Incorporates specially selected materials and components to offer crucial weight-saving performance. External 500 denier Cordura® outer for high resistance to abrasion. Alpinestars Bionic Rib Protector Features Dual-density, strategically positioned, ergonomically shaped protectors incorporate fiberglass core and robust PE hardshell outer for excellent impact and shock dispersion. Central adjustable back panel with Velcro attachments offers complete range of fit allowing protection to be worn under or over garment. Fully adjustable front strap with a D-ring closure features elasticated section for comfort. Adjustable shoulder straps constructed from highly breathable 3D mesh with elasticated gusset for snug fit. Perforated rear for comfort and ventilation. Alpinestars Bionic Rib Protector Protection Dual-density, strategically positioned, ergonomically shaped protectors incorporate fiberglass core. Robust PE hardshell outer for excellent impact and shock dispersion. Alpinestars Bionic Rib Protector Size Chart Alpinestars Bionic Rib Protector FAQs Q: Is the Alpinestars Bionic Rib Protector FIA certified?A: No, the Bionic Rib Protector is not FIA 8870 certified, but it offers excellent protection for club-level and regional karting events. Q: What sizes are available?A: The Bionic Rib Protector is available in multiple adult and youth sizes, designed for various chest circumferences. Check the size chart for details. Q: What materials are used in the construction?A: It features a rigid outer shell paired with internal bio-foam padding for a balance of protection and comfort. Q: Can this rib protector be worn under a kart suit?A: Yes. The low-profile, contoured design allows it to fit comfortably under most CIK/FIA-compliant karting suits. Q: Who is this rib protector best suited for?A: It’s ideal for junior and adult kart racers looking for reliable protection without the added weight or bulk of a certified model. Q: Is the Bionic Rib Protector adjustable?A: Absolutely. It includes elasticated and adjustable Velcro straps for a secure, race-ready fit. Q: Does this protector offer ventilation?A: Yes, the design features strategic perforations and a breathable liner to help reduce heat and keep airflow high.

Alpinestars Race v3 Nomex Pants Lightweight and offering high breathability and flame-resistance properties, the Race v3 Series Formula 1 specification tech base layer incorporates a relaxed fit for comfort when wearing under a driving suit. ALPINESTARS RACE V3 NOMEX PANT CONSTRUCTION Advanced tech base layer with Alpinestars innovative flame-resistant technology incorporating elastane fiber for improved engineered elasticity and high levels of comfort. Stretchable construction under the new homologation standard requirements.  ALPINESTARS RACE V3 NOMEX PANT PROTECTION Certified to the new FIA 8856-2018 homologation standard. Constructed from Lenzing FR® flame-resistant material.   ALPINESTARS RACE V3 NOMEX PANT KEY FEATURES Soft-touch textile for feel and enhanced comfort. Lenzing FR® material is a natural viscose fiber with unique thermal insulation and flame resistance properties that help prevent heat stress.

Alpinestars Indoor Kart Racing Suit V2 The Alpinestars Indoor Kart Racing Suit V2 is built for recreational karting, indoor karting leagues, rental kart tracks, and drivers who want a clean, professional look with better comfort than standard track rental gear. Designed with lightweight single-layer construction, this indoor kart suit delivers durability, breathability, and flexibility for long sessions behind the wheel. Made from a poly-cotton twill material, the Alpinestars Indoor Kart Racing Suit V2 offers a strong balance of comfort and abrasion-resistant wear for non-fireproof karting use. Its regular fit, adjustable waist belt, ergonomic collar, and flexible leg design make it easy to move in the kart while maintaining a polished race-ready appearance. Comfortable Indoor Karting Performance The Indoor Kart Racing Suit V2 is designed for drivers who need lightweight comfort without unnecessary bulk. The single-layer poly-cotton twill shell helps keep the suit breathable while still providing the durability needed for repeated karting use. Formula 1-inspired shoulder styling gives the suit a professional motorsport look, while the ergonomic collar with soft lining improves comfort around the neck during longer sessions. Knitted wrist cuffs help keep the sleeves in place, and the adjustable waist belt allows the driver to fine-tune the fit. Alpinestars Indoor Kart Racing Suit V2 Features Advanced single-layer construction for lightweight durability Poly-cotton twill material for strength, comfort, and breathability Formula 1-inspired shoulder design for a professional racing look Ergonomic collar with soft lining for improved comfort Adjustable waist belt for a secure, personalized fit Two thigh pockets for convenient storage Inner chest pocket with hook-and-loop closure Leg bottoms with hook-and-loop adjustment Wide leg gussets for improved flexibility Knitted wrist cuffs to reduce sleeve movement Durable front metal zipper Regular fit for unrestricted movement Ideal For Indoor And Recreational Karting The Alpinestars Indoor Kart Racing Suit V2 is a strong choice for recreational kart racers, indoor karting centers, arrive-and-drive events, corporate karting programs, and drivers who want their own dedicated karting suit. It is comfortable enough for repeated use and durable enough for the demands of regular karting sessions. This suit is intended for indoor and leisure karting applications. It is not a fireproof auto racing suit and is not designed for FIA or SFI automotive racing use. Frequently Asked Questions Is the Alpinestars Indoor Kart Racing Suit V2 fireproof? No. This suit is designed for recreational and indoor karting use where fireproof racewear is not required. It is not an auto racing fire suit. What material is the suit made from? The Alpinestars Indoor Kart Racing Suit V2 is made from a single-layer poly-cotton twill material designed for durability, comfort, and breathability. Does this suit have storage pockets? Yes. It includes two thigh pockets and an inner chest pocket with a hook-and-loop closure for small essentials. What kind of fit does the suit have? The suit has a regular fit with an adjustable waist belt, knitted wrist cuffs, and adjustable leg bottoms for comfortable movement in and out of the kart. Who is this suit best for? This suit is best for indoor karting, recreational karting, rental kart programs, arrive-and-drive events, and drivers who want a personal karting suit for comfort and presentation. Can I use this for auto racing? No. This suit is not designed for auto racing. Auto racing requires fire-retardant FIA or SFI-certified racewear depending on the sanctioning body and event rules. Competition Motorsport | sales@competitionmotorsport.com | (844) 438-7244

Alpinestars Tech-1 K v2 Karting Shoes The Alpinestars Tech-1 K v2 Karting Shoes are engineered for drivers who want durable protection, a secure anatomical fit, and precise feedback through the brake and throttle pedals. Developed specifically for the demands of kart racing, the Tech-1 K v2 combines a supportive nubuck microfiber upper with lightweight ventilation and an ultra-thin Formula 1-inspired outsole. An improved anatomical profile creates a flatter forefoot and a more natural fit around the foot. This streamlined design reduces unnecessary bulk around closely spaced kart pedals while helping the driver maintain accurate control during braking, acceleration, and rapid pedal transitions. The dual asymmetric closure system combines aramidic speed lacing with a low-profile hook-and-loop strap. This arrangement distributes pressure more evenly across the foot and allows the fit to be adjusted for dependable support throughout practice, qualifying, and racing. Durable Nubuck Microfiber Upper The Tech-1 K v2 uses an advanced hybrid upper constructed from durable nubuck and microfiber materials. The supportive structure is designed to withstand repeated karting use while remaining lightweight and flexible. Strategically positioned perforated zones improve airflow through the shoe, helping reduce heat buildup during long indoor sessions and warm outdoor race weekends. Enhanced Anatomical Fit The revised anatomical design improves the shape of the forefoot and allows the shoe to sit more naturally around the driver’s foot. A flatter toe area helps reduce excess material and improves contact with closely positioned pedals. This close-fitting profile supports accurate pedal movement without creating unnecessary pressure around the toes or midfoot. Dual Asymmetric Closure System The asymmetric closure follows the natural shape of the foot rather than applying pressure directly down the center. Aramidic speed laces run through durable para-aramidic eyelets to provide a secure and personalized fit. An ultra-thin hook-and-loop ankle strap adds support while maintaining a low profile inside the kart. Ergonomic Heel Counter Alpinestars’ polypropylene foot counter supports the heel and helps maintain stability during aggressive braking. The ergonomic construction limits unwanted rear-foot movement while allowing the ankle to move naturally. External Toe Reinforcement Reinforcement on both sides of the toe improves abrasion resistance and protection in areas commonly exposed to pedals, chassis components, and repeated contact inside the kart. External Rear Heel Protection A protective rubber section at the rear of the heel helps resist abrasion and impact while entering the kart, operating the pedals, and walking through the paddock. Ultra-Thin Formula 1 Specification Sole The Tech-1 K v2 features an ultra-thin outsole developed using Alpinestars Formula 1 footwear technology. Its exclusive rubber compound is strategically ribbed to provide grip and sensitivity through the pedals. The rounded heel supports smooth movement between the brake and throttle, while the specialized tread provides dependable grip in both wet and dry conditions. Comfortable Low-Cut Collar The soft microfiber collar is cut lower around the rear of the ankle to reduce pressure against the Achilles area. This construction improves comfort and range of motion during repeated pedal operation. Nitrile Rubber Collar Padding Lightweight nitrile rubber padding provides support around the ankle without adding excessive bulk. The material helps maintain comfort during long karting sessions while preserving the shoe’s streamlined profile. Perforated Padded Tongue The soft padded tongue uses perforations to improve ventilation and comfort across the top of the foot. Its flexible construction works with the asymmetric closure to create an even, secure fit. Alpinestars Tech-1 K v2 Karting Shoe Features Designed specifically for indoor and outdoor kart racing Durable nubuck and microfiber hybrid upper Strategically positioned perforated ventilation zones Enhanced anatomical foot profile Flatter forefoot for improved pedal control Dual asymmetric closure system Aramidic speed lacing Durable para-aramidic lace eyelets Ultra-thin hook-and-loop ankle strap Ergonomic polypropylene heel counter External toe reinforcement on both sides External rear heel rubber protection Soft microfiber low-cut rear collar Lightweight nitrile rubber collar padding Perforated padded tongue Ultra-thin Formula 1 specification outsole Strategically ribbed rubber tread Responsive pedal feel and sensitivity Grip in wet and dry conditions Technical Specifications Product: Alpinestars Tech-1 K v2 Karting Shoes Manufacturer: Alpinestars Product Type: Kart racing shoes Upper: Nubuck and microfiber hybrid construction Ventilation: Strategically positioned perforated zones Closure: Aramidic speed laces with low-profile hook-and-loop strap Eyelets: Para-aramidic construction Heel Support: Ergonomic polypropylene foot counter Toe Protection: External reinforcement on both sides Heel Protection: External abrasion-resistant rubber reinforcement Collar: Soft microfiber with nitrile rubber padding Tongue: Perforated soft padding Outsole: Ultra-thin Formula 1 specification rubber sole Recommended Use: Indoor and outdoor kart racing Alpinestars Tech-1 K v2 Karting Shoe Size Chart Frequently Asked Questions What type of racing are the Alpinestars Tech-1 K v2 shoes designed for? The Tech-1 K v2 is designed specifically for kart racing, including indoor leagues, outdoor competition, practice sessions, and club-level events. Do the Tech-1 K v2 shoes provide good pedal feel? Yes. Their ultra-thin Formula 1 specification outsole is designed to provide direct brake and throttle feedback while maintaining dependable grip. What is the benefit of the asymmetric closure? The asymmetric design follows the natural shape of the foot and distributes pressure more evenly than a traditional centered lacing system. This helps create a supportive and personalized fit. Are the Alpinestars Tech-1 K v2 shoes breathable? Yes. Perforated sections in the upper and tongue improve airflow and help reduce heat buildup during longer karting sessions. What does the polypropylene heel counter do? The ergonomic heel counter supports and stabilizes the rear of the foot during braking and quick pedal transitions while helping limit unwanted heel movement. Are the toe and heel reinforced? Yes. External reinforcement protects both sides of the toe, while an abrasion-resistant rubber section protects the rear heel area. Are the Tech-1 K v2 shoes comfortable around the Achilles area? Yes. The rear collar is cut lower and uses soft microfiber to improve Achilles comfort and allow a greater range of ankle movement. Can the Tech-1 K v2 be used for indoor karting? Yes. The breathable construction, secure fit, and responsive outsole make the Tech-1 K v2 suitable for indoor and outdoor kart racing. Are these shoes fire-resistant? The Tech-1 K v2 is designed for kart racing and should not be used as a substitute for fire-resistant auto racing footwear. Drivers should use shoes approved to the standard required by their sanctioning organization. How should the Alpinestars Tech-1 K v2 fit? The shoes should fit snugly around the heel and midfoot without painful pressure points. Leave a small amount of space around the longest toe while wearing the socks normally used for racing. How should the Tech-1 K v2 Karting Shoes be cleaned? Clean the exterior with a soft damp cloth and mild soap, then allow the shoes to air dry naturally. Do not machine wash, fully submerge, or place them near direct heat. Durable Karting Support with Formula 1 Pedal Feel The Alpinestars Tech-1 K v2 Karting Shoes combine a durable ventilated upper, anatomical support, reinforced protection, and an ultra-thin Formula 1 specification outsole. Their secure asymmetric closure and responsive construction make them an excellent choice for kart racers seeking comfort, stability, and precise control.

Alpinestars Tech-M Pit Crew Gloves The Alpinestars Tech-M Pit Crew Gloves are purpose-built for professional motorsport mechanics who need fire-resistant protection, impact absorption, dependable grip, and fast on-and-off performance in the pit lane. Designed and developed through competition in the World Endurance Championship, the Tech-M combines a lightweight bonded aramid-fiber construction with strategically positioned protective foam, abrasion-resistant reinforcement, and textured leather palm inserts. The pre-curved design helps reduce material bunching while operating wheel guns, handling wheels, and completing other demanding pit-stop tasks. An open cuff with a 180-degree elasticated wrist provides a secure fit while allowing mechanics to quickly put on or remove the gloves. Developed for Professional Pit-Crew Use The Tech-M was designed specifically around the needs of motorsport pit crews. Its construction supports the rapid hand movements, tool control, grip, and protection required during high-pressure pit stops. The reduced-material design helps preserve dexterity and tactile feedback while maintaining protection in areas exposed to impact, abrasion, vibration, and heat. Flame-Resistant Aramid Construction The main glove body is made from bonded flame-resistant aramid fiber. This lightweight construction provides a balance of protection, comfort, flexibility, and durability for professional motorsport environments. The flame-resistant materials help provide the coverage required for pit-lane personnel working around fuel, hot components, brakes, wheels, and other competition hazards. Impact-Absorbing Knuckle and Finger Protection Silicon FR-coated protective patches incorporate foam reinforcement across the knuckles and fingers. These strategically positioned areas help absorb impact during wheel changes, equipment handling, and other pit activities. The protective construction is designed to provide additional coverage without creating unnecessary bulk or significantly restricting hand movement. Reinforced Thumb and Index-Finger Area A Silicon FR-reinforced aramid patch is positioned between the thumb and index finger. This high-contact area experiences substantial wear when gripping wheel guns, handles, tools, and other pit equipment. The reinforcement improves abrasion resistance while helping the glove maintain its shape and performance through repeated use. Textured Goat Nappa Leather Palm Inserts Strategically positioned 1 mm Textured Goat Nappa leather inserts provide grip, abrasion resistance, and shock absorption across key palm contact areas. The leather reinforcement helps mechanics maintain control of wheel guns, wheels, tools, and equipment while reducing vibration and impact transmitted through the hands. Pre-Curved Fingers and Palm The fingers and palm are pre-curved to follow the natural gripping position of the hand. This construction reduces excess material and bunching when holding a wheel gun or other pit equipment. The ergonomic shape helps improve dexterity, comfort, and control during fast, repetitive pit-stop procedures. Open Cuff with 180-Degree Elasticated Wrist The wide cuff opening allows mechanics to quickly put on the gloves when preparing for a pit stop. A 180-degree elasticated wrist helps hold the glove securely in place without requiring a bulky closure system. An integrated silicone pull tab assists with removal, helping pit crew members transition quickly between tasks. Durable Embroidered Graphics Fully embroidered Alpinestars graphics provide a professional appearance and improved durability compared with basic surface printing. The branding is designed to withstand repeated professional use and frequent handling. FIA Homologated Pit-Crew Protection The Alpinestars Tech-M Pit Crew Gloves comply with the FIA 8856-2000 homologation standard. This makes them suitable for many professional motorsport applications requiring approved protective equipment for pit-lane personnel. Teams and crew members should confirm the required certification with their racing organization, series, or sanctioning body before competition. Alpinestars Tech-M Pit Crew Glove Features Designed specifically for professional motorsport pit crews Developed through World Endurance Championship competition Bonded flame-resistant aramid-fiber construction Lightweight reduced-material design Impact-absorbing foam reinforcement at the knuckles and fingers Silicon FR-coated protective patches Reinforced thumb and index-finger contact area Textured 1 mm Goat Nappa leather palm inserts Enhanced grip, abrasion resistance, and shock absorption Pre-curved fingers and palm reduce material bunching Wide open cuff allows quick entry 180-degree elasticated wrist provides a secure fit Silicone pull tab assists with glove removal Durable embroidered Alpinestars graphics FIA 8856-2000 homologated Alpinestars Tech-M Pit Crew Glove Specifications Manufacturer: Alpinestars Model: Tech-M Product Type: Pit Crew Racing Gloves Main Material: Bonded flame-resistant aramid fiber Protection: Foam-reinforced Silicon FR knuckle and finger patches Palm: Textured 1 mm Goat Nappa leather inserts Fit: Pre-curved fingers and palm Wrist: 180-degree elasticated construction Cuff: Wide open aperture with silicone removal tab Homologation: FIA 8856-2000 Ideal for Pit-Lane and Motorsport Workshop Tasks The Alpinestars Tech-M Pit Crew Gloves are designed for demanding motorsport tasks, including: Wheel changes Wheel-gun operation Tire and wheel handling Endurance-racing pit stops Sports-car and touring-car competition Professional race-team service work Trackside mechanical support Motorsport workshop preparation Why Choose Alpinestars Tech-M Pit Crew Gloves? The Alpinestars Tech-M combines fire-resistant protection with the grip, impact absorption, and dexterity required for professional pit-lane work. Its reinforced knuckles, fingers, palm, and thumb area help protect the hands during wheel changes and tool operation. The lightweight pre-curved construction improves control while reducing bunching, and the wide cuff allows quick entry during time-sensitive pit stops. For mechanics who need FIA-homologated protection developed specifically for motorsport service work, the Tech-M is a purpose-built solution. Alpinestars Tech-M Pit Crew Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-M Gloves FIA approved?Yes. The Tech-M Pit Crew Gloves comply with the FIA 8856-2000 homologation standard. Are these gloves designed for drivers or pit crew members?They are specifically designed for motorsport pit crews and mechanics performing wheel changes, tool operation, and other pit-lane tasks. Do the Tech-M Gloves have impact protection?Yes. Foam-reinforced Silicon FR patches are strategically positioned across the knuckles and fingers to help absorb impact. What material is used on the palm?The palm uses strategically positioned 1 mm Textured Goat Nappa leather inserts for grip, abrasion resistance, and shock absorption. Are the gloves suitable for using a wheel gun?Yes. Their palm reinforcement, pre-curved fit, grip inserts, and impact-absorbing construction are designed for wheel-gun operation and wheel changes. What is the benefit of the pre-curved design?The pre-curved fingers and palm follow the natural gripping position of the hand, reducing material bunching and improving control. How do the gloves stay secure around the wrist?A 180-degree elasticated wrist provides a close, secure fit without requiring a bulky external closure. Are the gloves easy to remove quickly?Yes. The wide cuff opening and integrated silicone tab make them easier to put on and remove during fast pit-lane transitions. Are the Alpinestars graphics printed or embroidered?The gloves feature fully embroidered graphics for improved durability and a professional appearance.

Alpinestars Youth Neck Support A Kart Racing Neck Brace for Young Champions Protect your young driver like the pros. The Alpinestars Youth Neck Support delivers premium head and neck protection for karting’s next generation. Whether your child is chasing victory at local kart tracks or gaining seat time in race go karts, this karting brace is engineered to reduce the risk of serious neck injuries by minimizing helmet roll and sudden impact forces. Designed for junior racers, it offers the same commitment to safety, performance, and comfort trusted by world-class athletes—scaled for youth-sized competitors. Crafted with lightweight, high-density foam and ergonomic shaping, this Kart Racing neck support ensures consistent comfort and freedom of movement during long stints behind the wheel. The easy-to-use rear fastener and compatibility with most karting suits and helmets make it ideal for serious kart racing. From weekend warriors to rising stars, give your young driver the confidence to push harder, knowing they’re protected by a brand synonymous with motorsport excellence. Alpinestars Youth Neck Support Highlights Lightweight karting neck brace for junior drivers with ergonomic, race-ready fit Designed to reduce axial load and rotational forces in kart crashes Durable high-density core foam with soft liner for comfort and sweat absorption Compatible with most youth karting helmets and suits Specially designed for youth or smaller framed rider the Youth Neck Support functions when the helmet and support frame provide an alternative load path for the excessive energy that compresses the neck. If the helmet is in contact with the neck support at the moment of impact the overall load passing through the neck can be reduced, which may prevent a fracture from occurring and reduce the chance of muscular injuries from extreme head movement. Although it is not possible to eliminate the risk of any form of injury, the support has been proven to help reduce the most serious damage and minimize the risk of collateral injury as the impact load is channeled away from the neck. Alpinestars Youth Neck Support Features New compact and easy to use lightweight neck protection to fit kids from 8 - 14 years old. Ergonomic designed and engineered shape for perfect fitment and engagement with A-5s and Youth Bionic Action Jacket Left and right rigid frames made from a polymer compound in combination with the internal smooth edged soft injected EVA provide a perfect fit and stable positioning. Overall frame construction dissipates energy loads by transmitting them across the back. Flexible back connector between the left and the right frames allows the Neck Support to follow the body movement when riding.

Sparco Gulf Racing Stage Rucksack Race-Ready Gig Bag for Gear-Heavy Drivers Designed for racers who travel light, the 15-liter (0.5 cu. ft.) Sparco Gulf Racing Stage Rucksack is your on-the-move command center. With dedicated compartments for your helmet and shoes, rugged wheels, and Sparco’s race-ready durability, this backpack duffel is built to haul everything from suits to snacks without breaking a sweat. Whether you're a weekend warrior or a full-time pro driver, this is the bag that says, “Yeah, I came prepared.” Sparco Gulf Racing Stage Rucksack Features Purpose-Built Helmet & Shoe Compartments: Keep your most important gear protected and separated with padded, designated zones. Reinforced Construction: Quilted padding lines the interior while a rugged under compartment gives structure and shock resistance on the go. Double Harness Straps: Two wide, adjustable straps cinch your load securely—perfect for race days when everything gets packed to the limit. Telescoping Pull Handle & Durable Wheels: Maneuver easily through pits, airports, or garages with reinforced wheels and a solid extending handle. Front Document Pocket: Ideal for quick-access items like tech sheets, schedules, or passports when traveling for events. Sparco Gulf Stage Rucksack FAQs: Will this rucksack fit a full-size racing helmet? Yes, it features a dedicated helmet compartment designed specifically for motorsport use. Is it suitable for air travel? Absolutely. It has reinforced wheels and a telescoping handle, making it ideal for travel to national or international events. How much gear can it carry? It’s built to hold your helmet, shoes, suit, accessories, and more—perfect for full track-day kits. Serious Protection, Iconic Style If you're serious about racing, your gear deserves serious protection. The Sparco Gulf Stage Rucksack brings premium materials, smart design, and iconic Gulf style to your travel setup—because a pro-level driver should never look like a rookie in the paddock.

Alpinestars Tech-1 K v3 Karting Gloves The Alpinestars Tech-1 K v3 Karting Gloves are premium competition gloves designed for drivers who demand precise steering feedback, lightweight comfort, and dependable grip. Their ergonomic construction combines pre-curved fingers, a synthetic suede palm, and strategically applied silicone grip to create a responsive connection with the kart steering wheel. Four-way stretch materials allow the gloves to move naturally with the hands, while semi-external seams reduce interior bulk and pressure points. Certified to the FIA 8877-2022 Grade 1 homologation standard, the Tech-1 K v3 delivers current competition approval with the fit, sensitivity, and distinctive styling expected from Alpinestars. FIA 8877-2022 Grade 1 Homologation The Alpinestars Tech-1 K v3 is homologated to the FIA 8877-2022 Grade 1 standard for karting apparel. This current certification makes the gloves suitable for karting events that require FIA-approved protective equipment. Drivers should always confirm the specific equipment rules of their championship, sanctioning organization, or event before competition. Lightweight Construction with Precise Steering Feel The Tech-1 K v3 uses a lightweight chassis that minimizes unnecessary material between the driver and steering wheel. This streamlined construction helps preserve tactile feedback, allowing the driver to feel changes in front-end grip, steering load, and chassis movement. Reduced bulk also allows the fingers to move freely when making quick corrections or maintaining a consistent steering position during demanding sessions. Four-Way Stretch Upper A dual-layer nylon and cotton upper incorporates four-way stretch to provide a close, flexible fit. The material follows the natural movement of the hand without creating excessive resistance across the knuckles or fingers. The stretch construction also helps reduce loose material and bunching, keeping the glove securely positioned during rapid steering inputs. Synthetic Suede Palm The synthetic suede palm provides a durable and stable contact surface for the steering wheel. Its low-profile construction balances abrasion resistance with the sensitivity needed for precise kart control. Synthetic suede also supports consistent performance through repeated practice sessions, qualifying runs, and race-day use. Silicone-Printed Grip Silicone printing across the palm improves traction against the steering wheel. The grip treatment helps reduce unwanted hand movement during braking, cornering, and quick changes of direction. Because the silicone is applied directly to the palm surface, it adds grip without requiring a thick reinforcement layer that could reduce steering feel. Pre-Curved Finger Design The fingers are shaped to follow the natural position of the hand around a kart steering wheel. This pre-curved construction reduces material bunching and minimizes the effort needed to maintain a secure grip. A more natural hand position can help reduce fatigue during long races, endurance events, and repeated sessions throughout a race weekend. Semi-External Seams Semi-external seams move much of the stitching away from sensitive contact areas inside the fingers. This creates a smoother interior and helps reduce irritation or pressure during extended use. The seam configuration also supports a close fit while maintaining the durability required for competitive karting. Sublimated Alpinestars Graphics The upper glove features bold sublimated graphics that resist fading and cracking. Multiple color combinations allow drivers to coordinate their gloves with their karting suit, helmet, shoes, and team colors. The graphic treatment provides a distinctive appearance without adding raised materials or unnecessary weight to the glove. Straight-Cut Gauntlet Cuff A straight-cut gauntlet cuff extends over the wrist to provide a clean, secure fit. The streamlined design allows the glove to remain comfortably positioned while maintaining unrestricted wrist movement. The cuff construction also makes the gloves easy to put on and remove between sessions. Alpinestars Tech-1 K v3 Karting Glove Features FIA 8877-2022 Grade 1 homologated Lightweight construction for improved steering sensitivity Four-way stretch dual-layer nylon and cotton upper Synthetic suede palm for durability and tactile feedback Silicone-printed grip improves steering-wheel traction Pre-curved fingers support a natural driving position Semi-external seams reduce interior pressure points Close ergonomic fit helps minimize material bunching Sublimated graphics resist fading Straight-cut gauntlet cuff provides secure wrist coverage Available in youth and adult sizes Alpinestars Tech-1 K v3 Karting Glove Specifications Manufacturer: Alpinestars Model: Tech-1 K v3 Product Type: Kart Racing Gloves Upper Material: Four-Way Stretch Dual-Layer Nylon and Cotton Palm: Synthetic Suede Grip: Silicone-Printed Treatment Finger Construction: Pre-Curved Seams: Semi-External Cuff: Straight-Cut Gauntlet Homologation: FIA 8877-2022 Grade 1 Why Choose the Alpinestars Tech-1 K v3? The Tech-1 K v3 is designed for drivers who want direct steering feedback without sacrificing comfort. Its lightweight stretch upper follows the hand closely, while the synthetic suede palm and silicone grip provide the traction required for aggressive karting. Pre-curved fingers and semi-external seams further improve long-session comfort by reducing bunching and internal pressure. Combined with FIA 8877-2022 Grade 1 approval, these features make the Tech-1 K v3 a strong choice for competitive youth and adult kart racers. Alpinestars Tech-1 K v3 Karting Gloves Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 K v3 Gloves FIA approved?Yes. They are homologated to the FIA 8877-2022 Grade 1 standard for karting apparel. What type of grip do the gloves use?The Tech-1 K v3 uses silicone printing across the synthetic suede palm to improve traction and steering-wheel control. Are the seams internal or external?The gloves use semi-external seams to reduce interior bulk and pressure points while maintaining a close fit. Are the fingers pre-curved?Yes. The pre-curved construction follows the natural shape of the hand around the steering wheel and helps reduce material bunching. What is the upper glove made from?The upper uses a four-way stretch, dual-layer nylon and cotton construction for flexibility, comfort, and a close fit. Are the Tech-1 K v3 Gloves breathable?Yes. Their lightweight stretch construction helps manage heat and allows the hands to move naturally during demanding sessions. Are youth sizes available?Yes. The Tech-1 K v3 is offered in youth and adult sizing. Refer to the size chart for the most accurate fit. Are these gloves suitable for indoor and outdoor karting?Yes. Their lightweight construction and silicone grip work well for both indoor and outdoor kart competition, provided they meet the event’s safety requirements. How should the Alpinestars Tech-1 K v3 Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excess material at the fingertips. How should the gloves be cleaned?Follow the care instructions supplied by Alpinestars. Avoid bleach, harsh chemicals, machine drying, and direct high heat that could damage the materials or silicone grip.

Alpinestars Tech-1 Start v4 Nomex Racing Gloves The Alpinestars Tech-1 Start v4 Nomex Gloves are engineered to deliver lightweight protection, direct steering feedback, and a close anatomical fit. A newly developed single-panel upper and reduced-material finger construction help minimize bulk without sacrificing the coverage required for competitive motorsport. The Tech-1 Start v4 is built around the way a driver naturally holds the steering wheel. Box-cut fingertips, strategically printed silicone grip zones, and a straight extended cuff work together to improve comfort, control, and ease of entry. Certified to the SFI 3.2/5A standard, these gloves are a strong choice for drivers who want dependable protection and a clean, performance-focused design. Reduced-Material Finger Design The Tech-1 Start v4 uses an innovative finger construction designed to reduce excess fabric around the hand. Removing unnecessary material helps the glove feel lighter and improves sensitivity when operating the steering wheel, shifter, switches, and other cockpit controls. The streamlined construction also reduces bunching inside confined cockpits, where precise hand movement and consistent steering feel are especially important. Single-Panel Upper Construction A single upper panel creates a smoother, more uniform fit across the back of the hand. Fewer material transitions help reduce pressure points and allow the glove to move naturally as the fingers flex around the steering wheel. This simplified construction also contributes to the glove’s low overall weight and clean exterior appearance. Box-Cut Fingertips The ring and middle fingers use a box-cut fingertip design without traditional fourchettes. This construction eliminates unnecessary side panels in key areas and creates a more anatomical shape around the fingertips. The result is a closer fit with less material between the driver and the controls, helping improve dexterity in tight cockpit environments. Silicone-Printed Palm Grip Ergonomically positioned silicone zones are printed across the palm to improve steering-wheel traction. The grip pattern is placed in the areas that experience the greatest contact during cornering, braking, and rapid steering inputs. The silicone surface provides control without adding a thick layer between the hand and the wheel, preserving tactile feedback and helping the driver maintain a relaxed grip. Straight Extended Cuff The Tech-1 Start v4 features a close-fitting, straight extended cuff that provides additional wrist coverage and dependable overlap with a compatible racing suit sleeve. An elasticated wrist helps hold the glove securely in place while keeping the entry opening flexible enough for quick on-and-off use between sessions. Lightweight Cockpit-Focused Fit Every major design feature is intended to reduce unnecessary weight and bulk. The single-panel upper, compact finger construction, and low-profile grip zones create a glove that feels responsive without becoming restrictive. This close fit is especially beneficial for drivers working with small steering wheels, paddle shifters, radio controls, data-system buttons, and other tightly packaged cockpit equipment. SFI 3.2/5A Certified Protection The Alpinestars Tech-1 Start v4 Gloves are certified to the SFI 3.2/5A standard. This certification makes them suitable for many racing organizations that require approved fire-resistant driver gloves. Drivers should confirm the exact certification requirements of their sanctioning body before competition. Alpinestars Tech-1 Start v4 Glove Features Lightweight fire-resistant racing glove construction Single-panel upper reduces seams and excess material Reduced-weight finger construction Box-cut fingertips on the ring and middle fingers No-fourchettes design in key finger areas Anatomical fit developed for confined cockpits Ergonomically positioned silicone palm grip zones Close-fitting straight extended cuff Elasticated wrist provides secure retention Easy entry and removal SFI 3.2/5A certified Alpinestars Tech-1 Start v4 Specifications Manufacturer: Alpinestars Model: Tech-1 Start v4 Product Type: Nomex Auto Racing Gloves Upper Construction: Single-panel design Finger Construction: Reduced-material box-cut fingertips Palm: Silicone-printed grip zones Cuff: Straight extended design Wrist: Elasticated Homologation: SFI 3.2/5A Why the Tech-1 Start v4 Feels Different Many entry-level racing gloves rely on traditional multi-panel finger construction that can create extra material around the fingertips. The Tech-1 Start v4 takes a different approach by simplifying the upper and reshaping the fingers around the driver’s natural hand position. This design helps the glove feel lighter, cleaner, and more connected to the steering wheel. The silicone palm adds traction where it is needed, while the extended cuff and elasticated wrist keep the glove securely positioned throughout a session. Alpinestars Tech-1 Start v4 Nomex Glove Size Chart Frequently Asked Questions What is the benefit of the single-panel upper?The single-panel design reduces seams, bulk, and material transitions across the back of the hand, creating a smoother and lighter fit. What does box-cut fingertip construction mean?The ring and middle fingers are shaped without traditional side-panel fourchettes, reducing excess material and improving the anatomical fit. Do the gloves have silicone grip?Yes. Silicone zones are printed across the palm in areas selected to improve steering-wheel traction and control. Are the Tech-1 Start v4 Gloves SFI approved?Yes. They are certified to the SFI 3.2/5A standard. How should these gloves fit?They should fit closely around the fingers and palm without restricting movement. There should be minimal excess material at the fingertips. Do the gloves use a wrist strap?No. The extended cuff uses an elasticated wrist to provide a secure fit without a separate closure strap. Are these gloves designed for small cockpits?Yes. Their reduced-material finger construction and close anatomical fit are specifically beneficial in confined cockpit environments. Will the silicone palm reduce steering feel?The silicone zones are low profile and strategically positioned to add grip while preserving tactile feedback through the steering wheel.

Alpinestars Kart Racing Rain Suit The Alpinestars Kart Racing Rain Suit is essential wet-weather gear for kart racers who need to stay dry, comfortable, and focused when the track turns wet. Designed to be worn over your primary karting suit, this lightweight transparent rain suit provides full-body waterproof protection without hiding your racewear, team colors, or sponsor logos. Built for competitive karting, the Alpinestars Kart Racing Rain Suit combines waterproof materials, taped seams, elasticized cuffs, and a tailored fit to help reduce water ingress while minimizing excess flapping at speed. The clear outer-layer construction allows your driving suit to remain visible, while the ergonomic design helps maintain freedom of movement in the kart. Whether you are preparing for a rainy race weekend, a wet qualifying session, or unpredictable practice conditions, the Alpinestars Kart Racing Rain Suit is a must-have piece of karting gear for drivers who want dependable rain protection without compromising comfort or control. Alpinestars Kart Racing Rain Suit Details Waterproof Karting Protection: Lightweight waterproof rain suit designed to be worn over a kart racing suit in wet conditions. Transparent Outer Layer: Clear construction allows your race suit, team colors, and sponsor branding to remain visible. Taped Seam Construction: Sealed seams help prevent water from entering through the suit during heavy rain. Inner V-Shaped Gusset: Designed to improve protection during heavy downpours and reduce water ingress through the front opening. Waterproof Front Closure: Waterproof zipper and Velcro collar closure help seal the suit against the elements. Elasticized Fit Points: Elastic waist, wrist cuffs, and ankle cuffs help keep the rain suit secure while driving. Tailored Karting Fit: Precise fit helps reduce bunching and excessive flapping at karting speeds. High-Profile Collar: Provides added sealing around the neck for improved wet-weather coverage. Asymmetric Front Opening: Alpinestars-specific front opening design improves fit and rain protection. Right Elbow Heat Protection: Heavy-duty textile sleeve panel helps protect against heat generated by the kart engine. Alpinestars Kart Racing Rain Suit Construction Lightweight waterproof material for wet-weather karting use. Taped seams to help block water ingress. Elasticized waist, wrists, and ankles for a secure fit. Waterproof zipper with Velcro collar closure. Transparent design keeps the driver’s karting suit visible. Reinforced right elbow panel for added durability and heat resistance. Alpinestars Kart Racing Rain Suit Sizing The Alpinestars Kart Racing Rain Suit is available in both youth and adult sizing. It is designed to be worn over your primary kart racing suit, so choose the size that best matches your driver size and racewear fit. Youth Sizes: 120, 130, 140, 150 Adult Sizes: XS, S, M, L, XL, 2XL, 3XL Why Choose the Alpinestars Kart Racing Rain Suit? Rain racing requires confidence, visibility, and comfort. The Alpinestars Kart Racing Rain Suit helps protect drivers from wet conditions while preserving the fit and visibility of their main karting suit. Its lightweight waterproof construction, secure cuffs, taped seams, and reinforced elbow panel make it a smart addition to any kart racer’s gear bag. Alpinestars Kart Racing Rain Suit Sizing Chart