Alpinestars Auto Race Gloves

Alpinestars Tech-1 ZX v4 FIA/SFI Nomex Gloves Rev up your racing experience with the Alpinestars Tech-1 ZX v4 Nomex auto racing gloves - the latest top-of-the-line glove from the leaders in high-performance racing gear. These gloves are more than just, well, gloves; they're your ticket to improved safety, unrivaled grip and performance, and a dash of style that'll make you feel like a racing legend. What's New? Alpinestars is always on the quest for perfection when it comes to driver safety and performance. With the Tech-1 ZX v4, they've turned down the heat, quite literally! These gloves boast a jaw-dropping 20% improvement in heat transmission without compromising on the fit, feel, and grip that Alpinestars is famous for. Designed For The Pros (And Perfect for You) Developed hand-in-hand with Formula 1 and Endurance racing's finest, the Tech-1 ZX v4 Gloves provide top-notch protection and temperature control. Thanks to their dual-sided honeycomb fabric construction, breathability is off the charts. No more sweaty palms during those high-speed laps! Grip That Won't Let Go The 3D silicone print palm delivers grip like never before, and the pre-curved shape means less material bunching when you're gripping the wheel for dear life. External seams? Yes, please! They keep those pressure points at bay, ensuring superior comfort throughout your race. Feel The Control Outer grip zones on these gloves give you unparalleled control over the cockpit's commands. Plus, the ergonomically designed 3D grip technology with strategically placed silicone surface patterning boosts flexibility and control, making every maneuver a breeze. Stay Connected In this digital age, staying connected is crucial. These gloves are touchscreen compatible, so you can stay in touch with your pit crew without removing them. Safety First Certified to meet updated FIA 8856-2018 and SFI 3.3 homologation standards, these gloves are not just stylish but incredibly safe. Alpinestars Tech 1-ZX V4 Glove Size Chart Alpinestars Tech 1-ZX V4 Glove FAQs What makes a good racing glove? A good racing glove should offer a snug fit, superior grip, breathability, and meet safety standards. The Tech-1 ZX v4 ticks all these boxes and then some! How do I choose a racing glove? Consider factors like fit, grip, breathability, and safety certifications. The Tech-1 ZX v4 excels in all these aspects. Do racing gloves make a difference? Absolutely! They provide better grip, reduce fatigue, and enhance safety. The Tech-1 ZX v4 takes it up a notch with its advanced features. What are racing gloves used for? Racing gloves are essential for providing a secure grip on the steering wheel, enhancing control over the vehicle, and protecting your hands in case of accidents. How do I wash my racing gloves? Follow the manufacturer's care instructions for washing your racing gloves. Typically, it's recommended to hand wash them in mild detergent and let them air dry. Ready to Take the Checkered Flag? Elevate your racing game with the Alpinestars Tech-1 ZX v4 Nomex Gloves. It's not just a purchase; it's a commitment to safety, performance, and style. So what are you waiting for? Grab your pair today and make every lap count. Victory is just a glove away!

Alpinestars Tech-1 ZX v3 Nomex Racing Gloves The Alpinestars Tech-1 ZX v3 Nomex Racing Gloves are engineered for professional drivers who demand exceptional protection, precise steering-wheel feel, and lasting comfort. Developed with leading Formula 1 and endurance racing drivers, the latest Tech-1 ZX generation introduces an advanced dual-sided honeycomb construction designed to improve heat protection and breathability. The new honeycomb Nomex top layer delivers nearly a 20% improvement in heat transmission performance compared with the previous generation. This enhanced protection is achieved without sacrificing the close fit, flexibility, and control that have made the Tech-1 ZX one of Alpinestars’ premier racing gloves. Advanced Honeycomb Nomex Construction The Tech-1 ZX v3 uses a breathable, flame-resistant aramidic fiber main construction with a bonded aramidic lining. This two-layer honeycomb assembly helps regulate temperature while providing the protection required for high-level motorsport competition. The lightweight construction reduces bulk around the hands, allowing the driver to maintain a natural connection with the steering wheel and cockpit controls during long races and demanding track sessions. Alpinestars Tech-1 ZX v3 Glove Features Certified to the FIA 8856-2018 homologation standard Advanced dual-sided honeycomb aramidic fiber construction Bonded aramidic lining for improved comfort and temperature control Nearly 20% improved heat transmission performance External seams for reduced pressure points and enhanced comfort Pre-curved fingers and palm for a natural driving position Ergonomic 3D silicone grip technology on the palm and fingers Strategically positioned grip pattern for flexibility and control Outer grip zones for precise cockpit control Touchscreen-compatible thumb and index fingertip Improved Grip and Steering-Wheel Feel A newly developed 3D silicone print is applied across the palm and fingers to provide secure grip with less printed surface area. This reduced pattern helps preserve flexibility and steering-wheel feel while still delivering dependable control under demanding racing conditions. Additional grip zones are positioned along the outer areas of the glove to improve contact with switches, paddles, and other cockpit controls. Pre-Curved Fit and External Seams The pre-curved shape has been increased from the previous version to better match the natural position of the hands while holding the steering wheel. This helps reduce material bunching, improves fit, and minimizes hand fatigue during extended driving sessions. External seams remove bulky stitching from the inside of the fingers, reducing pressure points and improving overall comfort and sensitivity. Touchscreen Compatibility The thumb and index fingertip are touchscreen compatible, allowing drivers to operate phones, tablets, data systems, and other touch-sensitive devices without removing their gloves. Alpinestars Tech-1 ZX v3 Nomex Gloves Sizing Chart Alpinestars Tech-1 ZX v3 Nomex Racing Gloves FAQs Are the Alpinestars Tech-1 ZX v3 Gloves FIA approved?Yes. The Tech-1 ZX v3 Gloves are certified to the FIA 8856-2018 homologation standard for fire-resistant motorsport apparel. What is the benefit of the honeycomb Nomex construction?The dual-sided honeycomb aramidic construction improves breathability and heat protection while maintaining a lightweight and flexible feel. How much has heat protection improved?Alpinestars states that the new honeycomb top layer provides nearly a 20% improvement in heat transmission performance compared with the previous generation. Why do these gloves use external seams?External seams reduce pressure points inside the fingers and provide a smoother, more comfortable fit while driving. Are the Tech-1 ZX v3 Gloves touchscreen compatible?Yes. The thumb and index fingertip are designed to work with compatible touchscreen devices. Do the gloves have a pre-curved fit?Yes. The fingers and palm are pre-curved to follow the natural position of the hands on the steering wheel, reducing bunching and fatigue.

Alpinestars Tech-1 Race v4 Nomex Racing Gloves The Alpinestars Tech-1 Race v4 Nomex Racing Gloves deliver premium comfort, dependable steering-wheel grip, and certified fire-resistant protection at an accessible price point. Developed for competitive auto racing, the Tech-1 Race v4 combines a lightweight aramid construction with pre-curved fingers, external palm-side seams, and a high-grip silicone surface. An open-cuff design and 180-degree elasticated wrist make the gloves easy to put on while maintaining a secure, streamlined fit. The close anatomical construction improves steering feedback and dexterity when operating paddle shifters, buttons, switches, and other cockpit controls. The Tech-1 Race v4 meets FIA 8856-2018 and SFI homologation requirements, making it suitable for many professional, amateur, endurance, road-racing, and club-level motorsport applications. Pre-Curved Racing Fit The fingers are pre-curved to follow the natural shape of the hand around the steering wheel. This ergonomic construction reduces resistance through the fingers and helps the driver maintain a relaxed grip during qualifying laps, sprint races, and extended driving sessions. The close-fitting design also reduces excess material around the fingertips, improving dexterity and steering-wheel sensitivity. External Palm-Side Seams External seams along the palm side of the fingers move bulky stitching away from the primary pressure areas inside the glove. This creates a smoother interior surface and helps reduce discomfort while gripping the steering wheel. The seam placement provides a natural feel without sacrificing the durability required for repeated competition use. High-Grip Silicone Palm A silicone grip surface across the palm provides dependable traction against the steering wheel. The low-profile grip pattern improves control during braking, cornering, shifting, and rapid steering inputs while preserving tactile feedback. Enhanced traction allows the driver to maintain control with less gripping pressure, which can help reduce hand fatigue during longer races and track sessions. Open Cuff and Elasticated Wrist The open-cuff design allows quick entry and removal between sessions. A 180-degree elasticated wrist holds the glove securely in place without requiring a bulky external closure. The streamlined wrist construction provides comfortable overlap with the sleeve of a compatible racing suit while maintaining freedom of movement. Flame-Resistant Aramid Construction The Alpinestars Tech-1 Race v4 is constructed from flame-resistant aramid fiber with a bonded aramid lining. This lightweight construction provides certified motorsport protection while maintaining flexibility and comfort. The soft interior lining helps reduce irritation and provides a close, consistent fit during extended use. FIA and SFI-Approved Racing Protection The Alpinestars Tech-1 Race v4 Racing Gloves meet FIA 8856-2018 and applicable SFI homologation standards. These certifications make the gloves suitable for many racing series and sanctioning bodies that require approved fire-resistant driver equipment. Drivers should confirm the required certification with their racing organization before competition. Alpinestars Tech-1 Race v4 Glove Features Fire-resistant auto-racing glove construction Flame-resistant aramid fiber outer material Bonded aramid lining Pre-curved fingers provide a natural driving position External palm-side seams reduce pressure points Silicone palm surface improves steering-wheel grip Close anatomical fit improves dexterity Open-cuff design allows quick entry and removal 180-degree elasticated wrist provides a secure fit Lightweight construction supports long-session comfort FIA 8856-2018 approved SFI homologated Alpinestars Tech-1 Race v4 Specifications Manufacturer: Alpinestars Model: Tech-1 Race v4 Product Type: Auto Racing Gloves Outer Material: Flame-resistant aramid fiber Lining: Bonded aramid lining Palm: High-grip silicone surface Fit: Anatomical with pre-curved fingers Wrist: Open cuff with 180-degree elasticated construction Available Sizes: Small through XX-Large Homologation: FIA 8856-2018 and SFI Ideal for Multiple Motorsport Applications The Alpinestars Tech-1 Race v4 Racing Gloves are suitable for a wide range of motorsport disciplines, including: Circuit racing Endurance racing Sprint racing Sports-car competition Touring-car racing Rally and time trials Autocross Driver instruction HPDE and performance track driving Why Choose Alpinestars Tech-1 Race v4 Gloves? The Tech-1 Race v4 combines many features commonly associated with higher-priced racing gloves, including pre-curved fingers, external palm-side seams, silicone grip material, and a lightweight aramid construction. Its open cuff and elasticated wrist provide quick entry and a secure fit, while the close anatomical design delivers the steering feedback and dexterity required for competitive driving. The result is a comfortable, certified racing glove that provides strong performance and value. Alpinestars Tech-1 Race v4 Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 Race v4 Gloves FIA approved?Yes. The gloves meet the FIA 8856-2018 standard for protective clothing used in automobile competition. Are the Tech-1 Race v4 Gloves SFI approved?Yes. The gloves also meet applicable SFI homologation requirements. Confirm the exact certification required by your racing organization before competition. How should Alpinestars racing gloves fit?They should fit closely around the hands and fingers without restricting movement. There should not be excessive material at the fingertips or uncomfortable pressure across the palm. What is the benefit of the pre-curved fingers?The pre-curved construction follows the natural position of the hand around the steering wheel, improving comfort and helping reduce fatigue. Why are the seams located on the outside?External palm-side seams move bulky stitching away from pressure areas inside the fingers, creating a smoother and more comfortable fit. What type of grip material is used on the palm?The palm features a silicone surface designed to improve steering-wheel traction while maintaining tactile feedback. Do the gloves use a wrist strap?No. The open-cuff design uses a 180-degree elasticated wrist to provide a secure fit without a separate closure strap. Do Alpinestars racing gloves require a break-in period?The gloves may become more flexible and conform more closely to the hands with regular use. They should still fit comfortably when first worn. Should racing gloves be stretched to improve the fit?Do not forcefully stretch the gloves. Select the correct size using the sizing chart and allow the materials to naturally conform during use. Are the Tech-1 Race v4 Gloves suitable for endurance racing?Yes. Their lightweight construction, pre-curved fit, external seams, and silicone palm grip make them suitable for extended driving sessions.

Alpinestars Tech-1 Start v4 Nomex Racing Gloves The Alpinestars Tech-1 Start v4 Nomex Gloves are engineered to deliver lightweight protection, direct steering feedback, and a close anatomical fit. A newly developed single-panel upper and reduced-material finger construction help minimize bulk without sacrificing the coverage required for competitive motorsport. The Tech-1 Start v4 is built around the way a driver naturally holds the steering wheel. Box-cut fingertips, strategically printed silicone grip zones, and a straight extended cuff work together to improve comfort, control, and ease of entry. Certified to the SFI 3.2/5A standard, these gloves are a strong choice for drivers who want dependable protection and a clean, performance-focused design. Reduced-Material Finger Design The Tech-1 Start v4 uses an innovative finger construction designed to reduce excess fabric around the hand. Removing unnecessary material helps the glove feel lighter and improves sensitivity when operating the steering wheel, shifter, switches, and other cockpit controls. The streamlined construction also reduces bunching inside confined cockpits, where precise hand movement and consistent steering feel are especially important. Single-Panel Upper Construction A single upper panel creates a smoother, more uniform fit across the back of the hand. Fewer material transitions help reduce pressure points and allow the glove to move naturally as the fingers flex around the steering wheel. This simplified construction also contributes to the glove’s low overall weight and clean exterior appearance. Box-Cut Fingertips The ring and middle fingers use a box-cut fingertip design without traditional fourchettes. This construction eliminates unnecessary side panels in key areas and creates a more anatomical shape around the fingertips. The result is a closer fit with less material between the driver and the controls, helping improve dexterity in tight cockpit environments. Silicone-Printed Palm Grip Ergonomically positioned silicone zones are printed across the palm to improve steering-wheel traction. The grip pattern is placed in the areas that experience the greatest contact during cornering, braking, and rapid steering inputs. The silicone surface provides control without adding a thick layer between the hand and the wheel, preserving tactile feedback and helping the driver maintain a relaxed grip. Straight Extended Cuff The Tech-1 Start v4 features a close-fitting, straight extended cuff that provides additional wrist coverage and dependable overlap with a compatible racing suit sleeve. An elasticated wrist helps hold the glove securely in place while keeping the entry opening flexible enough for quick on-and-off use between sessions. Lightweight Cockpit-Focused Fit Every major design feature is intended to reduce unnecessary weight and bulk. The single-panel upper, compact finger construction, and low-profile grip zones create a glove that feels responsive without becoming restrictive. This close fit is especially beneficial for drivers working with small steering wheels, paddle shifters, radio controls, data-system buttons, and other tightly packaged cockpit equipment. SFI 3.2/5A Certified Protection The Alpinestars Tech-1 Start v4 Gloves are certified to the SFI 3.2/5A standard. This certification makes them suitable for many racing organizations that require approved fire-resistant driver gloves. Drivers should confirm the exact certification requirements of their sanctioning body before competition. Alpinestars Tech-1 Start v4 Glove Features Lightweight fire-resistant racing glove construction Single-panel upper reduces seams and excess material Reduced-weight finger construction Box-cut fingertips on the ring and middle fingers No-fourchettes design in key finger areas Anatomical fit developed for confined cockpits Ergonomically positioned silicone palm grip zones Close-fitting straight extended cuff Elasticated wrist provides secure retention Easy entry and removal SFI 3.2/5A certified Alpinestars Tech-1 Start v4 Specifications Manufacturer: Alpinestars Model: Tech-1 Start v4 Product Type: Nomex Auto Racing Gloves Upper Construction: Single-panel design Finger Construction: Reduced-material box-cut fingertips Palm: Silicone-printed grip zones Cuff: Straight extended design Wrist: Elasticated Homologation: SFI 3.2/5A Why the Tech-1 Start v4 Feels Different Many entry-level racing gloves rely on traditional multi-panel finger construction that can create extra material around the fingertips. The Tech-1 Start v4 takes a different approach by simplifying the upper and reshaping the fingers around the driver’s natural hand position. This design helps the glove feel lighter, cleaner, and more connected to the steering wheel. The silicone palm adds traction where it is needed, while the extended cuff and elasticated wrist keep the glove securely positioned throughout a session. Alpinestars Tech-1 Start v4 Nomex Glove Size Chart Frequently Asked Questions What is the benefit of the single-panel upper?The single-panel design reduces seams, bulk, and material transitions across the back of the hand, creating a smoother and lighter fit. What does box-cut fingertip construction mean?The ring and middle fingers are shaped without traditional side-panel fourchettes, reducing excess material and improving the anatomical fit. Do the gloves have silicone grip?Yes. Silicone zones are printed across the palm in areas selected to improve steering-wheel traction and control. Are the Tech-1 Start v4 Gloves SFI approved?Yes. They are certified to the SFI 3.2/5A standard. How should these gloves fit?They should fit closely around the fingers and palm without restricting movement. There should be minimal excess material at the fingertips. Do the gloves use a wrist strap?No. The extended cuff uses an elasticated wrist to provide a secure fit without a separate closure strap. Are these gloves designed for small cockpits?Yes. Their reduced-material finger construction and close anatomical fit are specifically beneficial in confined cockpit environments. Will the silicone palm reduce steering feel?The silicone zones are low profile and strategically positioned to add grip while preserving tactile feedback through the steering wheel.

Alpinestars Tech-1 ZX v2 Nomex Racing Gloves The Alpinestars Tech-1 ZX v2 Nomex Racing Gloves are premium fire-resistant driving gloves engineered for exceptional comfort, steering-wheel feel, and protection. Designed for serious competitors, the Tech-1 ZX v2 combines strategically positioned seams, a lightweight aramidic construction, and advanced palm grip technology. Internal stitching around the thumb improves sensitivity when operating steering-wheel buttons and cockpit controls, while externally stitched finger seams reduce pressure points and provide a smooth, comfortable fit during long races. Premium Nomex Racing Glove Construction The Tech-1 ZX v2 features a flame-resistant aramidic fiber main construction with a bonded aramidic lining. This lightweight assembly helps regulate temperature while maintaining the flexibility and sensitivity required for precise driving. Alpinestars uses lightweight printed graphics instead of heavier sewn-on details, helping reduce overall glove weight without sacrificing its professional appearance. Alpinestars Tech-1 ZX v2 Glove Features FIA 8856-2018 homologated for motorsport competition Flame-resistant aramidic fiber main construction Bonded aramidic lining for temperature control and comfort Internal thumb seam for improved control sensitivity External finger seams to reduce pressure points Ergonomic chassis with pre-curved fingers Strategically positioned silicone grip on the palm and fingers Latex-treated inner palm to help reduce micro-slipping Outer grip zones for precise cockpit control Touchscreen-compatible thumb and index fingertips Open-cuff design with a 180-degree elasticated wrist Extended cuff length for increased fire and heat protection Lightweight printed graphics Advanced Palm Grip and Control The inner palm is treated with latex to reduce small movements between the hand and glove while gripping the steering wheel. This helps provide a more secure and consistent connection during high-intensity driving. Ergonomically positioned silicone grip sections across the palm and fingers improve traction without making the glove feel overly stiff. Additional outer grip zones provide improved control when operating switches, paddles, and other cockpit equipment. Internal and External Seam Construction The Tech-1 ZX v2 uses internal stitching around the thumb to improve tactile feedback when operating multiple push-buttons commonly found on modern racing steering wheels. The four fingers use external seams that move bulky stitching away from the inside of the glove. This reduces pressure points and improves comfort, especially during endurance racing and extended track sessions. Pre-Curved Ergonomic Fit The ergonomic chassis and pre-curved fingers follow the natural position of the hands while holding a steering wheel. This helps reduce material bunching and driver fatigue while maintaining a secure and responsive fit. An open-cuff design with a 180-degree elasticated wrist makes the gloves easier to put on and remove while keeping them securely positioned during competition. FIA 8856-2018 Protection The Alpinestars Tech-1 ZX v2 Gloves are certified to the FIA 8856-2018 homologation standard. The extended cuff provides increased wrist and forearm coverage to help protect against fire and heat when worn with an approved racing suit. Touchscreen Compatibility Touch-sensitive material on the thumb and index fingertips allows drivers to operate compatible touchscreen devices, including mobile timing applications and data acquisition equipment, without removing their gloves. Sizing Chart Alpinestars Tech-1 ZX v2 Nomex Racing Gloves FAQs Are the Alpinestars Tech-1 ZX v2 Gloves FIA approved?Yes. The gloves are certified to the FIA 8856-2018 homologation standard for fire-resistant motorsport apparel. Why are the finger seams located on the outside?External finger seams reduce internal pressure points and provide a smoother, more comfortable fit while driving. Why is the thumb seam stitched internally?The internal thumb seam improves sensitivity when operating steering-wheel buttons, switches, and other cockpit controls. What improves the steering-wheel grip?The palm combines a latex treatment with strategically positioned silicone grip sections to reduce slipping and improve control. Are the Tech-1 ZX v2 Gloves touchscreen compatible?Yes. The thumb and index fingertips are designed to operate compatible touchscreen devices. Do these gloves have pre-curved fingers?Yes. The fingers are pre-curved to follow the natural driving position and help reduce material bunching and fatigue. How does the open-cuff design work?The open cuff and 180-degree elasticated wrist make the gloves easier to put on and remove while providing a secure fit around the wrist.

Alpinestars Tech-1 Race v3 Nomex Gloves The Alpinestars Tech-1 Race v3 Nomex Gloves deliver excellent steering feel, lightweight protection, and premium driving comfort at an accessible price. Developed with construction techniques found in higher-priced racing gloves, the Tech-1 Race v3 combines a bonded aramidic fiber shell, pre-curved fingers, strategically printed silicone grip, and a full-length protective gauntlet. A minimal-seam design helps reduce bulk and pressure points, while the open cuff and 180-degree elasticated wrist allow quick entry without sacrificing a secure fit. Certified to FIA 8856-2018, the Tech-1 Race v3 provides current fire-resistant protection for competitive motorsport. Lightweight Aramidic Fiber Construction The glove’s main structure is made from flame-resistant aramidic fiber bonded for an effective balance of protection, flexibility, and comfort. Alpinestars combines lightweight materials with carefully selected construction methods to reduce overall glove weight without compromising coverage. The lighter design allows the driver to move naturally between the steering wheel, shifter, paddle controls, and cockpit switches while helping reduce fatigue during extended sessions. Pre-Curved Fingers and Palm The Tech-1 Race v3 is shaped around the natural position of the hand while gripping a steering wheel. Pre-curved fingers and a contoured palm reduce the effort required to close the hand and help prevent material from bunching in high-contact areas. This driving-specific shape promotes a more relaxed grip, allowing the driver to maintain control without unnecessary hand tension. Comfort-Focused Finger Construction Inside-stitched seams on all five fingers create a clean exterior and support dependable durability. The carefully shaped finger construction provides a close, responsive fit while maintaining the flexibility needed for steering and cockpit operation. Minimal seam placement across the glove helps reduce unnecessary material and creates a smoother connection between the hand and steering wheel. Extended Silicone Grip Printing Silicone printing extends across the palm and fingers to improve steering-wheel traction and tactile control. The grip pattern is positioned in key contact areas to help the driver maintain a secure hold during braking, cornering, shifting, and rapid steering corrections. Because the silicone is printed directly onto the glove, it provides dependable grip without the thickness of a separate palm layer. Direct Steering Feel and Control The lightweight palm and low-profile silicone print preserve sensitivity through the steering wheel. Drivers can feel steering resistance, vibration, and changes in vehicle balance while maintaining consistent traction. This combination of grip and feedback helps reduce the need to squeeze the wheel excessively, supporting improved comfort and precision over longer runs. Single-Panel Full-Gauntlet Top A full-gauntlet single-panel upper provides streamlined coverage from the hand through the extended cuff. Reducing the number of material transitions helps lower weight and creates a clean, close-fitting profile. The extended cuff provides additional protection around the wrist and supports proper overlap with the sleeve of a compatible fire-resistant racing suit. Open Cuff with 180-Degree Elasticated Wrist Alpinestars’ open-cuff design makes the Tech-1 Race v3 quick and easy to put on between sessions. A 180-degree elasticated wrist holds the glove securely once fitted without requiring a bulky external strap. The design combines easy entry in the pits with stable retention while the driver is in the car. Reduced-Weight Printed Graphics External printed design details give the glove a distinctive Alpinestars appearance without adding the weight and stiffness associated with heavier embroidered overlays. The low-profile graphics complement the glove’s lightweight construction while maintaining a professional competition look. FIA 8856-2018 Homologated Protection The Alpinestars Tech-1 Race v3 Nomex Gloves are certified to the FIA 8856-2018 standard for protective clothing used in automobile competition. The fire-resistant aramidic construction and extended cuff meet modern requirements for heat and flame protection. Drivers should verify the homologation requirements of their specific racing organization before competition. Alpinestars Tech-1 Race v3 Glove Construction Bonded flame-resistant aramidic fiber main construction Lightweight materials reduce overall glove weight Minimal-seam design improves comfort and sensitivity Inside-stitched seams on all five fingers Pre-curved fingers and palm follow the natural driving position Full-gauntlet single-panel upper construction Extended silicone printing across the palm and fingers Low-profile printed graphics reduce added weight Alpinestars Tech-1 Race v3 Glove Features Excellent steering-wheel feel and tactile feedback Silicone palm and finger grip improves control Pre-curved construction helps reduce hand fatigue Open cuff allows easy entry and removal 180-degree elasticated wrist provides secure retention Extended cuff improves wrist and sleeve coverage Lightweight construction supports natural hand movement FIA 8856-2018 homologated Alpinestars Tech-1 Race v3 Glove Specifications Manufacturer: Alpinestars Model: Tech-1 Race v3 Product Type: Nomex Auto Racing Gloves Main Material: Flame-resistant aramidic fiber Finger Construction: Pre-curved with inside-stitched seams Palm: Extended silicone grip print Upper: Single-panel full-gauntlet construction Wrist: 180-degree elasticated design Cuff: Open extended gauntlet Homologation: FIA 8856-2018 Premium Performance Without the Premium Price The Tech-1 Race v3 offers a strong combination of advanced fit, lightweight materials, secure silicone grip, and modern FIA protection. Its pre-curved shape supports natural steering control, while the minimal-seam construction and elasticated wrist improve comfort and convenience. For drivers seeking a responsive FIA-approved glove with many of the features found in Alpinestars’ higher-level models, the Tech-1 Race v3 delivers excellent performance and value. Alpinestars Tech-1 Race v3 Nomex Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 Race v3 Gloves FIA approved?Yes. The gloves are homologated to the FIA 8856-2018 standard. What material are the gloves made from?The main construction uses bonded flame-resistant aramidic fiber for protection, comfort, and reduced weight. Do the gloves have silicone palm grip?Yes. Extended silicone printing is positioned across the palm and fingers to improve grip and steering control. How do the pre-curved fingers improve comfort?The pre-curved shape follows the natural position of the hand around the steering wheel, helping reduce resistance, bunching, and fatigue. Do the Tech-1 Race v3 Gloves have a wrist strap?No. A 180-degree elasticated wrist provides secure retention without a separate adjustment strap. What is the benefit of the open-cuff design?The open cuff makes the gloves easier to put on and remove while the elasticated wrist keeps them securely positioned during driving. Why is the cuff extended?The extended gauntlet provides additional wrist coverage and proper overlap with a compatible racing suit sleeve. How should the Tech-1 Race v3 Gloves fit?They should fit closely around the palm and fingers without restricting movement or leaving excessive material at the fingertips.

Alpinestars Tech-1 Start v3 Nomex Racing Gloves The Alpinestars Tech-1 Start v3 Nomex Gloves are engineered to provide lightweight protection, precise steering-wheel control, and lasting comfort for competitive auto racing. Designed with a single upper panel and an innovative finger construction, these racing gloves reduce excess material throughout the fingers while lowering the overall weight of the glove. The streamlined design creates a close, anatomically optimized fit that is especially beneficial inside confined racing cockpits. Drivers receive improved freedom of movement, reduced bulk, and a more direct connection with the steering wheel and vehicle controls. Lightweight Single-Panel Construction The single-panel upper construction minimizes unnecessary seams and material across the glove. This helps improve flexibility and reduces potential pressure points during long races, qualifying sessions, and track days. By reducing excess fabric in the fingers, the Tech-1 Start v3 offers a more precise fit and improved dexterity without sacrificing the protection required for motorsport competition. Innovative Finger Design Box-cut fingertip construction provides a comfortable and natural finger position while helping reduce material buildup near the fingertips. The middle and ring fingers use a seamless, no-fourchette design that eliminates the traditional fabric panels between the fingers. This construction creates a less restrictive feel and allows the glove to conform more closely to the driver’s hand. The reduced bulk is particularly useful when operating steering-wheel buttons, switches, paddles, and other controls inside compact racing cockpits. Silicone Palm Grip Ergonomically positioned silicone-printed zones across the palm provide enhanced grip on the steering wheel. The strategically placed silicone helps reduce unwanted hand movement and allows the driver to maintain control without applying excessive gripping pressure. The improved grip can help reduce hand fatigue while providing a more consistent steering feel during demanding driving conditions. Extended Elasticated Cuff The close-fitting, straight cuff extends beyond the wrist to provide dependable coverage between the gloves and racing suit. An elasticated wrist allows for easy entry while helping keep the glove securely positioned once fitted. The streamlined cuff design also reduces unnecessary bulk around the wrist and fits comfortably beneath or over the cuff of a compatible racing suit. FIA and SFI-Certified Racing Protection The Alpinestars Tech-1 Start v3 Gloves are certified to FIA 8856-2018 and SFI 3.3/5 standards for use in sanctioned motorsport competition. These certifications make the gloves suitable for many professional, club-level, endurance, road-racing, and grassroots motorsport applications. Always confirm the required safety standard with your racing organization or sanctioning body before competition. Alpinestars Tech-1 Start v3 Nomex Glove Features Lightweight Nomex auto-racing glove construction Single upper panel reduces seams and overall weight Innovative finger construction reduces excess material Box-cut fingertip design for improved comfort and fit Seamless no-fourchette construction on the middle and ring fingers Anatomically optimized for confined racing cockpits Ergonomically positioned silicone palm grip zones Enhanced steering-wheel grip and control Close-fitting straight extended cuff Elasticated wrist for easy entry and a secure fit Designed to improve dexterity and reduce hand fatigue FIA 8856-2018 certified SFI 3.3/5 certified Ideal for Multiple Racing Applications The Tech-1 Start v3 is an excellent choice for drivers who need certified protection without the weight and bulk of a heavier racing glove. Its close-fitting design and silicone palm grip make it suitable for road racing, autocross, time trials, endurance racing, track days, and other forms of competitive motorsport. Why Choose the Alpinestars Tech-1 Start v3 Gloves? These gloves combine certified fire-resistant protection with a lightweight, driver-focused construction. The reduced-material finger design improves comfort and dexterity, while the silicone palm zones provide the grip needed for accurate steering input. For drivers seeking an affordable Alpinestars racing glove with FIA and SFI certification, the Tech-1 Start v3 delivers a strong balance of protection, comfort, and control. Alpinestars Tech-1 Start v3 Nomex Glove Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 Start v3 Gloves fire resistant?Yes. These gloves are designed for auto racing and use fire-resistant materials appropriate for certified motorsport competition. What certifications do the Tech-1 Start v3 Gloves have?They are certified to FIA 8856-2018 and SFI 3.3/5 standards. What is a no-fourchette finger design?A no-fourchette design removes the traditional material panels between selected fingers. This reduces bulk and creates a closer, more anatomically optimized fit. Do these gloves have silicone on the palm?Yes. Ergonomically positioned silicone-printed zones provide enhanced grip on the steering wheel. Are these gloves suitable for kart racing?They are designed as fire-resistant auto-racing gloves. Karting organizations may use different certification requirements, so drivers should confirm the rules for their specific series. How should Alpinestars racing gloves fit?They should fit closely without restricting movement or causing uncomfortable pressure at the fingertips. A secure fit helps preserve steering feel and control.