Racetech Manufacturing Limited
Racetech Door Pulls
$36.00
Racetech Door Pulls
When it’s you versus the race track, every piece of your gear has to deliver in terms of performance, reliability, and light weight. Racetech fabric racing door pulls are light, reliable, and built for abuse so you can rely on them when the stakes are highest.
Key Features:
Precision Engineering: Designed with the racer’s mindset for maximum performance and safety.
Lightweight Strength: Every gram saved matters when you’re chasing lap times and podiums.
Built for Competition: Meets the standards serious racers demand on and off the track.
Specifications:
High-performance nylon webbing
Track-tested durability
Optimized for professional motorsports
Racetech Door Pulls FAQs:
Is this product certified for racing use?Yes, it meets all relevant racing standards for its category.
Can it be used for street or track only?This product is specifically optimized for track and race environments.
How does it compare to similar products?Designed for maximum performance, it offers superior durability and functionality over typical alternatives.
Why Buy from Competition Motorsport?
We live racing. That means offering only track-proven gear, expert advice, and fast shipping so you’re never left waiting in the paddock. Let’s get you dialed in for success.
Sabelt S.p.A.
Sabelt 2 Inch Harness Pads
$36.00
Sabelt 2 Inch Harness Pads
Sabelt 2-inch harness pads offer additional padding for your harness shoulder straps, with easy-to-use Velcro closure. Sold in pairs.
Antigravity Batteries
Antigravity Tire Inflator / Air Pump | Compact 12V Portable Mini Compressor
$36.00
Antigravity AG-MSA-9 Tire Inflator / Air Pump
Compact Power to Keep You Rolling Anywhere
The Antigravity AG-MSA-9 Tire Inflator / Air Pump is an ultra-compact and portable air compressor designed to work seamlessly with your Micro-Start jump-starter or Portable Power Station. At just 3.5 x 1.5 x 4.25 inches and weighing only 1 lb, this travel-ready air pump packs serious convenience into a tiny footprint, letting you inflate tires and other gear anywhere, anytime.
Perfect for topping off car, truck, motorcycle, or dirt bike tires on the road or trail, it’s also ideal for bicycles, sports balls, small rafts, and other inflatables. It features a built-in pressure gauge and an integrated LED light to make night or roadside use safer and easier. Whether it lives in your glovebox, motorcycle saddlebag, or adventure kit, this inflator is the ultimate just-in-case tool to keep you moving.
Key Features
Ultra-Compact: Just 3.5″ x 1.5″ x 4.25″ and only 1 lb — fits in a glovebox or saddlebag.
Versatile Power Options: Works with 12V output from Micro-Start or vehicle cigarette lighter port.
LED Work Light: Built-in illumination makes night or roadside use easy.
Pressure Gauge: Integrated gauge shows tire pressure while inflating.
Multi-Use: Inflate vehicle tires, sports balls, small rafts, air mattresses, and more.
Portable Kit: Includes power cables and inflation tips for on-the-go use.
Detachable Cables: Compact 12" SAE-DC cable and long 9' SAE-cigarette lighter cable included.
Kit Includes
Mini Tire Inflator / Air Pump
12-inch Cable (SAE to DC 5.5mm) for use with Micro-Start 12V port
9-foot Cable (SAE to Male Cigarette Lighter) to reach any tire on a vehicle
Needle Tip for inflating sports balls
Plastic Tip for inflating small rafts, air mattresses, and other small inflatables
Specifications
Dimensions: 3.5″ x 1.5″ x 4.25″ (89x38x108mm)
Weight: 16 oz (454 g)
Power: 12V DC (via vehicle cigarette lighter, Micro-Start, or Portable Power Station)
Accuracy: Gauge is accurate within 3–4 psi (for emergency use only)
Compatible With
XP-20-HD
XP-20
XP-10-G2 (Gen 2)
XP-10-HD
XP-10 (Gen 1)
XP-1 (Gen 1)
PS-80
PS-45
Note: This inflator will not work with Micro-Start models that only have USB ports. It requires a 12V DC output port.
Paragon Pro Inc.
Paragon Guardian Female Bulkhead Connector
$36.00
Paragon Guardian Female Bulkhead Connector
Paragon’s Guardian Female Bulkhead Connector is available as a replacement for a damaged female Guardian bulkhead connector on any Paragon Viking, Viking Pro, or Viking Pro Dual cooler, as well as Arctic Wolf, Arctic Wolf Pro, Arctic Fox and Arctic Fox Pro cooler bags.
The Guardian Female Bulkhead Connector is Paragon’s emergency release connector option, allowing easy disconnection from your cooling system with a quick pull on the connected hose set or cooling garment.
Priced/sold individually.
Paragon Guardian Female Bulkhead Connector Details
Manufacturer: Paragon
Emergency release: yes
Replaces broken fitting on your Paragon Viking cooler or cooler bag
Sold individually
Paragon Pro Inc.
Paragon Guardian Male Connector
$36.00
Paragon Guardian Hose Connector
Paragon’s Guardian Male Connector is a replacement for any existing 1/4” or 5/16" Guardian Connector used on Paragon cooling garments and Guardian water hose sets. The Guardian Male Connector functions as a dry-break emergency release, allowing you to easily disconnect from your cooling system with a quick pull on your water hose set or connected garment.
Compatible With Paragon, Coolshirt, Momo, and F.A.S.T.
The Paragon Guardian Male Connector is compatible with female connectors used by Paragon, Coolshirt, Momo, and F.A.S.T. This means that, no matter what brand of driver cooling system you have, a Paragon cooling shirt will work with it because the shirt has two Paragon Guardian Male Connectors (inlet/supply and outlet/return)
If you own a Momo or F.A.S.T. cooling shirt and want to use it with a Paragon system, simply purchase two of these Guardian male connectors, snip off the connectors on your shirt, and replace them with the Guardians. That's it!
Paragon Guardian Male Connector Details
Manufacturer: Paragon
Connector type: male
Barbed-end size: regular 1/4" (6mm) or large 5/16" (8mm)
Universal dry-break connector
Priced/sold individually
Garmin Ltd.
Garmin Catalyst Dash Cam Universal Suction Cup Mount
$36.00
Garmin Catalyst Dash Cam Universal Suction Cup Mount
To mount the camera for the award winning Garmin Catalyst to a race car, we prefer the Garmin Catalyst Camera Suction Cup Mounting Kit. It includes a sturdy ball joint mount with a suction cup base for quickly mounting your Garmin Catalyst Remote Camera.
Mounting Kit Details
Manufacturer: Garmin
Manufacturer Part Number: 010-12530-25
Designed to perfectly fit the Garmin Catalyst remote camera
We have many racers that also take their Garmin Catalyst from their street car to their track day/race car and the Garmin Suction Cup Mounting Kit is a track-worthy way of securing your Catalyst to your race car.
Garmin Ltd.
Garmin Catalyst Universal Carrying Case
$36.00
Garmin Catalyst Universal Carrying Case
The Garmin Catalyst Universal Carrying Case is built for performance-minded racers who expect more from their gear. Store and protect your Garmin Catalyst in this Garmin Universal Carrying Case. Holds any tablet-sized electronic device up to 7 in. (18 cm) long.
Travel in style with this sleek Garmin Catalyst Carrying Case. It's built to endure the elements, protecting your compatible Garmin device (not included) for the long haul. This Garmin case sports a durable thermo-molded exterior with zipper and padded interior.
Garmin Catalyst Carrying Case Details
Manufacturer: Garmin
Manufacturer part no.: 010-11917-00
Dimensions: 7.0"L x 4.6"W x 2.0"H
Weight: 4.8 oz.
Protects your Garmin navigator
Thermo-molded exterior
Zipper and padded interior
Bell Racing Helmets
Bell SV (SE07, SE077) Helmet Shield Pivot Kit
$36.00
Bell Racing Helmets SV (SE07,SE077) Pivot Kit
The SV (SE07, SE077) Pivot Kit is replacement hardware for Bell helmets that use SE07 3mm, SE07 2mm, and SE077 3mm shields.
Bell recommends using a new hardware kit when replacing the helmet shield and keeping a spare pivot kit around. Available in Black or Silver.
Compatible With The Following Bell Racing Helmets:
HP77
HP7
RS7
RS7C LTWT
RS7SC LTWT
RS7 Carbon
RS7K
RS7K Carbon
KC7-CMR
KC7-CMR Carbon
CMS Performance
CMS Performance Roll Bar Harness Collars
from $36.00
CMS Performance Locking Roll Bar Harness Collars
Designed For CMS Performance Roll Bars To Keep Harnesses In Place
These locking roll bar collars from CMS Performance are designed and perfectly sized to fit roll bars with either 1.75" or 1.50" O.D. cross-bars. Precision-machined CMS Performance Roll Bar Harness Collars help keep your harness shoulder straps in exactly the right place on your roll bar.
These easy-to-install double-split aluminum collars come with high-strength Allen bolt hardware. CMS Performance powder coats them in rich satin black so they look as good as they perform.
CMS Performance Roll Bar Harness Collar Details
Manufacturer: CMS Performance
Manufacturer Part Numbers: RB-COLLAR-AL175 or RB-COLLAR-AL150
Features: clamps tight to help keep your shoulder straps firmly located in the proper position
Material: aluminum
Inside diameter (when tightened): 1.50" or 1.75"
Finish: satin black powder coating for long-lasting great looks
Roll bar collars are priced individually.
CMS Performance
CMS Performance RF1 Racing Brake Fluid (500 ml)
from $36.00
CMS Performance RF1 DOT4 Racing Brake Fluid
Real Life 622º Boiling Point Without the Real High Price
RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 622º F / 328º C, RF1 exceeds all DOT 3 & DOT 4 requirements and is compatible with all DOT 3, DOT 4, and DOT 5.1 fluids.
Note: RF1, like all DOT 4 brake fluids, is not compatible with DOT 5 silicone-based or any mineral-based brake fluids.
On the race track, there is perhaps no single safety system more important than your brakes. No single part of that system is more critical than brake fluid, given the extraordinarily high temperatures it operates under. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot. We found more than a few brands whose product was all hype and not high performance.
No Hype. All Performance. No Kidding.
So we did something about it. CMS Performance RF1 is manufactured in partnership with Orthene, maker of the also-excellent Halo P1 racing brake fluid and a brake fluid supplier to many racing teams in Formula 1, WEC, and other professional series. RF1 was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days.
The bottom line is this: you can spend a lot more on brake fluid, but it's hard to find higher-performance than RF1 Racing Brake Fluid.
CMS Performance RF1 Racing Brake Fluid Details:
Manufacturer: CMS Performance
Manufacturer part no.: CMSRF1
Typical dry boiling point: 622º F / 328º C
Typical wet boiling point: 399º F / 204º C
Exceeds DOT 3 & DOT 4 standards
Bottle size: 500 ml (16.9 fl. oz.)
Click Here for Product MSDS Sheet
A Word About Flushing Brake Fluid
All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point.
To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!
Competition Motorsport
Get This T-Shirt Free!
$34.00
Competition Motorsport RPM-Logo T-Shirt
For a limited time (while supplies last), get the Competition Motorsport "RPM" logo T-shirt FREE! Choose your T-shirt size and add it to your shopping cart with at least $99 worth of other gear and – voila! – the shirt is yours at no charge.
For road racing fanatics, this sleek and modern Competition Motorsport T-Shirt by Next Level Apparel is a must-have. Made from a premium 60/40 cotton/poly blend, it balances all-day comfort with track-day durability. Featuring the iconic CMS RPM logo on the chest, it’s built for those who live life in the fast lane, whether you’re in the paddock or pit lane—or just grabbing coffee between track sessions.
Fly The Competition Motorsport Flag Wherever You Go
CMS T-Shirt Features:
60/40 cotton/polyester blend delivers comfort with wrinkle resistance
Tailored fit with classic crew neck — track-day ready or casually clean-cut
Available exclusively in Black to match your motorsport mindset
Competition Motorsport "RPM" logo printed on the front
Perfect for race weekends, cars & coffee, or hanging in the paddock
Sizes from S through 2XL to fit every driver and enthusiast
Competition Motorsport T-Shirt FAQs:
What material is used in the CMS Logo T-Shirt? It’s crafted from a high-quality 60% cotton and 40% polyester blend that stays comfortable lap after lap.
Does this shirt shrink in the wash? The cotton/poly blend helps resist shrinking and keeps its fit after multiple washes.
Is the fit more athletic or relaxed? This shirt has a tailored, modern fit—not baggy, but not skin-tight. Order a size up if you prefer a looser fit.
Can I wear this shirt at the track? Absolutely—it's made for trackside hangs, race-day pride, or wrenching on your car in the garage.
Whether you're heading to an HPDE, prepping for autocross, or repping CMS at your favorite car show, this is the shirt that puts your passion in gear. Grab yours before they’re gone.
Sabelt S.p.A.
Sabelt UI-100 Nomex Racing Socks FIA 8856-2000 Certified
$32.00
$50.00
Sabelt UI-100 Nomex Socks
The Sabelt UI-100 Nomex Racing Socks are engineered for serious drivers who demand fire-resistant comfort and protection at every level of motorsport. Constructed from a premium blend of Aramidic (Nomex) and Viscose fibers, these calf-length socks offer a soft, anatomical fit designed to perform under pressure—whether you're pulling long stints on track or competing in FIA-sanctioned events.
Homologated to the FIA 8856-2000 standard, the Sabelt UI-100 socks are designed to reduce heat transfer while maintaining breathability, making them a must-have in your fireproof racing gear lineup. Lightweight, durable, and made in Italy, these racing socks provide full lower-leg coverage without compromising feel or flexibility.
FIA Homologation: FIA 8856-2000 approved
Material: Aramidic (Nomex) and Viscose blend
Design: Calf-length for extended coverage
Comfort: Soft-touch construction for long stints and reduced fatigue
Origin: Made in Italy
Competition Motorsport | sales@competitionmotorsport.com | (844) 438-7244
ISC Racers Tape
Dull Finish Racers Tape 2 In by 83 Ft
$32.00
Dull Finish Racers Tape 2in by 83ft (Gaffers Tape)
The preferred choice of the pros. Dull Finish Gaffers tape is a vinyl-coated cloth, rather than a poly coated. Anybody who has ever used Gaffers tape, in place of duct tape, never looks back. This tape has a high quality adhesive that does not leave a sticky residue when removed. It comes in six brilliant colors and has many racing uses, including pit marking, emergency body and fender repair and waterproofing. The uses are endless.
Available in eight colors;
Black
White
Red
Blue
Electric Blue
Yellow
Neon Pink
Neon Green
Sabelt S.p.A.
Sabelt Racing Tow Strap
$30.00
Sabelt Racing Tow Straps
Performance That Keeps You in the Race
Sabelt's Racing Tow Strap is simple and straightforward to install, available in multiple colors to complement any vehicle, and makes sure you can always get pulled out of trouble if/when the time comes!
Key Features:
Precision Engineering: Designed with the racer’s mindset for maximum performance and safety.
Lightweight Strength: Every gram saved matters when you’re chasing lap times and podiums.
Built for Competition: Meets the standards serious racers demand on and off the track.
Specifications:
Length: 10 7/8 in. (276 mm)
Mounting hole: 15 mm diameter
High-performance materials
Track-tested durability
Optimized for professional motorsports
Sabelt Racing Tow Strap FAQs:
Is this product certified for racing use?Yes, it meets all relevant racing standards for its category.
Can it be used for street or track only?This product is specifically optimized for track and race environments.
How does it compare to similar products?Designed for maximum performance, it offers superior durability and functionality over typical alternatives.
Why Buy From Competition Motorsport?
We live racing. That means offering only track-proven gear, expert advice, and fast shipping so you’re never left waiting in the paddock. Let’s get you dialed in for success.
Paragon Pro Inc.
Paragon Arctic Wolf/Fox Pro Replacement Battery Pigtail
$30.00
Paragon Arctic Wolf/Fox Pro Battery Pigtail
Paragon’s Arctic Wolf/Fox Battery Pigtail is available as a replacement for the factory-installed pigtail on any Arctic Wolf Pro or Arctic Fox Pro cooler bag.
Paragon Arctic Wolf/Fox Pro Battery Pigtail Details
Manufacturer: Paragon
Manufacturer part no.: 04-29400
Length: 10 inches
Weight: 1 lbs.
Sparco S.p.A.
Sparco Gulf Socks
$29.00
Sparco Gulf Socks
Racing Heritage for Your Feet
The Sparco Gulf Socks combine iconic racing heritage with everyday comfort, wrapped in a seamless, stylish package. Whether you're hitting the paddock or lounging at home, these Gulf-liveried socks are a subtle nod to motorsport greatness—without having to wear fireproof gear to the grocery store.
Sparco Gulf Socks Features:
Gulf-Inspired Design: The unmistakable Gulf colorway adds a bold motorsport aesthetic, perfect for fans of racing history.
Seamless Construction: Say goodbye to irritating seams. These socks are built for all-day wear without pressure points or bunching.
Premium Material Blend: Crafted from 80% combed cotton for softness, 17% polyamide for durability, and 3% elastane for stretch and fit.
Two Size Options: Choose from 36/40 EU (roughly US Men's 4–7) and 41/46 EU (US Men's 8–12) for the perfect fit.
Casual or Track Day: Whether it’s a trip to the kart track or just flexing your style at work, these socks handle both comfort and cred.
Sparco Gulf Socks FAQs:
What sizes are available for the Sparco Gulf Socks? They come in two EU sizes: 36/40 and 41/46, covering most adult foot sizes.
Are the Sparco Gulf Socks good for racing? These are lifestyle socks—not fireproof—so save them for before and after your stint behind the wheel.
Do the socks shrink after washing? Thanks to the elastane and polyamide blend, they retain their shape and size well when washed cold and air-dried.
Can I wear these with driving shoes? Absolutely. Their low-profile seamless design fits comfortably inside narrow racing or driving shoes.
Slide into motorsport history every morning with the Sparco Gulf Socks—perfect for racing fans who like their style low-key and high-performance.
