Sparco Race Gear

Sparco QRT-K Carbon Kevlar Racing Seat The QRT-K is a full Carbon Kevlar version of the QRT-R. The QRT-K looks amazing with the exposed yellow/black Carbon Kevlar weave. The QRT-K is one of the lightest seats on the market. The QRT-K weighs 13.5lbs fully trimmed (with padding, cover and harness guides) and is constructed from “Pre-Preg” aerospace grade Carbon Kevlar. The QRT-K was specifically designed for a larger driver and it can fit a 36” waist (pants size) driver. The QRT-K is unique because it was designed to fit a larger driver but has excellent fitment into smaller cockpits. The QRT-K requires the special QRT Side mounts (#600QRT) which allows the seat to be raked back for a comfortable ergonomic seating position. The QRT-K is FIA 8855-1999 approved. Sparco QRT-K Carbon Kevlar Racing Seat Size Large fits up to a 36” waist (pants size) What Is Sparco QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies to produce maximum strength with minimum weight. QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco QRT-K Carbon Kevlar Racing Seat Technology Ultralight Carbon Kevlar Composite Shell - 13.5lbs including cover and padding Visible carbon kevlar weave Excellent fitment into small cockpits Large size driver fitment Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA 8855-1999 approved Dimensions

Sparco Eagle 2.0 Race Suit Single-Layer Construction, Multi-Layer Performance The Sparco Eagle 2.0 Race Suit is the newest evolution of Sparco’s professional Eagle driver suit. Built with updated HOCOTEX® material that is softer and 30% thinner than before, the Eagle 2.0 delivers premium comfort, advanced fire protection, and modern FIA-approved performance in a lightweight single-layer design. With four new colorways, large stretch zones, 360-degree arm gussets, and improved breathability, the Eagle 2.0 is designed for serious racers who want maximum mobility without giving up protection. HOCOTEX Technology: Single Layer, Serious Protection The Eagle 2.0 is the result of more than three years of research and development. Sparco’s patented HOCOTEX® technology changes the way racing suits are built by creating a single-layer fabric that delivers the protective performance normally associated with multi-layer construction. Instead of relying on traditional quilted layers, HOCOTEX® uses a honeycomb structure with internal air cells. This design helps improve thermal protection while reducing bulk, weight, and restriction. Unprecedented Comfort And Breathability Thanks to HOCOTEX®, the Sparco Eagle 2.0 is three times more breathable than a suit made with traditional technology. The thinner fabric construction works with large side and back stretch panels to give drivers excellent comfort in the car. The Eagle 2.0 also features full 360-degree arm gussets for improved range of motion. Sparco’s new Eagle stretch fabric is lighter, more breathable, and more abrasion resistant than traditional stretch material, giving the suit better comfort and durability in high-movement areas. Improved Fire And Heat Resistance Traditional racing suits use multiple fabric layers sewn together in a quilted pattern, creating air spaces that expand during fire exposure to help protect the driver. HOCOTEX® takes a different approach with a honeycomb microcell structure that creates thousands of internal air chambers throughout the suit. While a traditional size 52 race suit may have around 300 air chambers, the Sparco Eagle 2.0 has more than 60,000 microcell air chambers. This structure helps deliver a 10 to 12 percent increase in heat protection performance while keeping the suit thin, light, and highly breathable. Sparco Eagle 2.0 Driver Race Suit Details FIA 8856-2018 homologated Single-layer construction with multi-layer protection Updated softer HOCOTEX® material Material is 30% thinner than the previous version 3X more breathable than a standard race suit Full 360-degree arm gussets for improved mobility Large stretch panels on the sides and back New breathable Eagle stretch fabric Reinforced arms and legs with anti-abrasive material More than 60,000 microcell air chambers Improved heat protection performance Patented Sparco HOCOTEX® technology Made in Italy Available in four colorways Developed through more than three years of research and development Why Choose The Sparco Eagle 2.0 Race Suit? The Sparco Eagle 2.0 Driver Race Suit is ideal for racers who want premium FIA-approved protection in a lightweight, highly breathable package. Its HOCOTEX® single-layer construction reduces bulk while delivering advanced thermal protection, and its large stretch panels help the suit move naturally in the driving position. For drivers who prioritize comfort, safety, and professional-level mobility, the Eagle 2.0 is one of Sparco’s most advanced race suits. Sparco Eagle 2.0 Driver Race Suit Sizing Chart Frequently Asked Questions Q: Is the Sparco Eagle 2.0 FIA approved?A: Yes. The Sparco Eagle 2.0 Race Suit is FIA 8856-2018 homologated. Q: What is HOCOTEX®?A: HOCOTEX® is Sparco’s patented single-layer fabric technology that uses a honeycomb microcell structure to provide multi-layer-style protection with less bulk. Q: Is the Eagle 2.0 a single-layer suit?A: Yes. The Eagle 2.0 uses single-layer construction while delivering protective performance normally associated with multi-layer suits. Q: How breathable is the Sparco Eagle 2.0?A: The Eagle 2.0 is three times more breathable than a suit produced with traditional technology. Q: Does the Eagle 2.0 have stretch panels?A: Yes. It has large stretch panels on the sides and back, plus 360-degree arm gussets for improved flexibility. Q: What makes the Eagle 2.0 more heat resistant?A: Its HOCOTEX® honeycomb structure creates more than 60,000 microcell air chambers, helping improve heat protection performance. Q: How many colorways are available?A: The Sparco Eagle 2.0 is available in four colorways. Q: Is the Sparco Eagle 2.0 made in Italy?A: Yes. The Eagle 2.0 uses patented Sparco HOCOTEX® technology made in Italy.

Sparco QRT Performance Racing Seat Amazingly Light. Supremely Comfortable. The Sparco QRT Performance seat represents the luxury evolution of Sparco's revolutionary QRT-R race seat. The QRT-R was the first seat to feature Sparco’s patented lightweight QRT technology, and the QRT Performance uses the same FIA race shell but is covered in rich Italian leather and Alcantara. Each Sparco QRT Performance is hand-stitched in the Sparco OEM factory in Torino, Italy. The QRT Performance has a unique CAD design featuring a lower seating position for taller drivers while maintaining exterior dimensions that fit into smaller cockpits. The QRT Performance holds the driver securely on the race track and is also comfortable for long trips on the road. Experience Sparco's Innovative QRT Technology Sparco QRT technology yields an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. This translates to an average weight savings of 30% when compared to standard fiberglass technology. So Sparco QRT racing seats approach the weight of carbon fiber at the price of fiberglass composite. The Sparco QRT Performance Racing Seat requires the Sparco #600QRT side mounts for proper installation. Sparco QRT Performance Racing Seat Features FIA 8855-1999 approved OEM Italian leather and Alcantara Ultra-light QRT fiberglass composite shell reduces weight up to 30% Lower seating position can fit taller/larger drivers Smaller outer dimensions for improved vehicle fitment Available in Black or Red Dimensions

Sparco EVO QRT Performance Racing Seats The Sparco EVO QRT Performance updates the iconic EVO with leather/Alcantara upholstery and QRT ultra-light construction. Slimmed shoulder bolsters improve fit in small cars, lower sides ease entry and exit, and raised harness slots improve belt routing—keeping drivers comfortable and planted on street or track. The EVO QRT series offers generous back-angle rake for long-stint comfort and is available in cloth or vinyl. FIA approved. Sizing EVO S — Small (up to 32" waist) EVO — Medium (up to 34" waist) EVO L — Large (up to 36" waist) EVO XL — Extra Large (up to 38" waist) What is Sparco QRT? Developed in Italy, QRT is a patented process that produces the lightest fiberglass composite shells on the market—up to 30% lighter than traditional methods—delivering a carbon-like weight at a fiberglass price. Key Features QRT ultra-light fiberglass composite shell Excellent fitment for compact cockpits Four sizes for precise fit (S to XL) Supportive ergonomics with raised harness guides Fire-retardant, high-grip fabrics FIA 8855-1999 approved Dimensions EVO S EVO (Standard) EVO L / EVO XL

Sparco Circuit/Circuit II Carbon Fiber Racing Seat Expiry: 2030 The Sparco Circuit Carbon Fiber is the ultra-light, pre-preg (dry) carbon version of the popular Circuit QRT seat, designed with built-in head protection for added driver safety. Featuring integrated head bolsters for lateral impact protection, it’s compatible with FHR and HANS devices for complete restraint system integration. Weighing significantly less than composite models, the Circuit Carbon combines a lightweight shell with strategic high-grip fabrics for lateral support and improved cockpit control. Its slim profile fits smaller cockpits while maintaining excellent ergonomics, and a thin-profile bottom cushion keeps the driver low without sacrificing comfort. FIA 8859-1999 approved. Key Features Pre-preg (dry) carbon fiber shell for ultra-lightweight strength Integrated head protection with impact-absorbing surround Compatible with HANS and FHR devices High-grip, fire-retardant fabric in strategic zones Excellent fit for compact cockpits Durable anti-wear fabric on seat edges FIA 8855-1999 approved Sizing Sparco Circuit Carbon Fiber Small / Narrow – fits up to a 32" waist Sparco Circuit II Carbon Fiber Medium – fits up to a 36" waist

Sparco ULTRA Carbon Racing Seat – FIA 8855-1999 Approved  - 2030 Expiry Extreme weight reduction meets uncompromising carbon fiber racing seat technology. The Sparco ULTRA Carbon Racing Seat is engineered for serious motorsport competitors who demand exceptional strength, minimal weight, and a low seating position. Constructed from aerospace-grade pre-preg carbon fiber, this ultra-lightweight fixed-back competition seat combines advanced materials with a purpose-built ergonomic design. Weighing approximately 8.3 lbs (3.8 kg), the Sparco ULTRA Carbon represents one of Sparco's most weight-focused FIA-approved racing seat designs. Its exposed dry carbon construction eliminates traditional upholstery and padding, reducing unnecessary weight while providing a more direct connection between the driver and vehicle. Designed for narrow racing cockpits, the ULTRA Carbon provides an exceptionally compact profile without sacrificing the contoured support needed during demanding competition. Its sculpted monocoque shell, integrated harness openings, and low seating position make it an outstanding choice for lightweight race cars, time attack builds, and competition vehicles where every pound matters. Sparco ULTRA Carbon Racing Seat Features FIA 8855-1999 Homologated: Competition racing seat designed to meet recognized FIA safety requirements. Ultra-Lightweight Construction: Approximately 8.3 lbs (3.8 kg) for exceptional weight savings. Pre-Preg Carbon Fiber Shell: Aerospace-grade dry carbon construction delivers excellent strength with minimal weight. Exposed Carbon Finish: Uncovered carbon fiber shell eliminates conventional fabric upholstery and padding. Low Seating Position: Thin, sculpted shell allows the driver to sit lower in the vehicle. Narrow Cockpit Compatibility: Compact exterior dimensions help accommodate restricted racing interiors. Ergonomic Monocoque Design: Integrated lumbar contouring and carefully engineered recline provide natural driver support. Direct Chassis Feedback: Minimal cushioning allows drivers to experience a more connected seating position. Integrated Harness Openings: Shoulder harness pass-through openings accommodate compatible motorsport harness systems. Side-Mount Installation: Designed for installation using compatible Sparco aluminum side brackets. Premium Racing Appearance: Glossy exposed carbon weave delivers a distinctive professional motorsport finish. Ultra-Lightweight Pre-Preg Carbon Fiber Construction The Sparco ULTRA Carbon Racing Seat uses advanced pre-preg carbon fiber technology to achieve an outstanding strength-to-weight ratio. Unlike conventional composite racing seats, which often rely on thicker shells, padding, and upholstery, the ULTRA Carbon focuses on minimizing material weight while maintaining the structural performance required for competition. Pre-preg carbon fiber construction utilizes reinforcement materials impregnated with a controlled amount of resin. This manufacturing method supports consistent material distribution and efficient structural design. The result is a lightweight carbon fiber monocoque shell that provides an exceptionally direct seating experience without unnecessary layers or bulk. Designed for Narrow Racing Cockpits Many competition vehicles have limited interior space, especially when equipped with roll cages, door bars, center tunnels, and specialized safety equipment. The Sparco ULTRA Carbon addresses these challenges with a compact, low-profile shell that allows installation in tight racing environments. Its streamlined side profile and carefully contoured seating area help maximize available cockpit space while supporting a secure driving position. This makes the ULTRA Carbon especially appealing for lightweight race car builds, track-focused vehicles, and custom motorsport applications where traditional racing seats may be too wide or bulky. Lower Seating Position and Improved Chassis Feedback The ULTRA Carbon eliminates conventional fabric upholstery and thick foam padding to create a seating surface that is both exceptionally lightweight and remarkably direct. By positioning the driver closer to the carbon shell, the seat can help lower the seating position compared with bulkier upholstered alternatives, depending on the mounting configuration. A lower seating position can improve helmet clearance, accommodate drivers within tight roll cage structures, and support more favorable driver positioning in competition vehicles. The rigid carbon construction also provides direct feedback from the vehicle chassis, allowing drivers to feel more connected to the car's movement during acceleration, braking, and cornering. Ergonomic Support Without Traditional Upholstery Despite its minimalist appearance, the Sparco ULTRA Carbon is engineered with driver ergonomics in mind. The one-piece carbon shell incorporates carefully shaped back support, lumbar contouring, and a natural recline angle intended to accommodate the driver's seated position. Its sculpted seating surface supports the body without requiring traditional foam cushions or fabric coverings. Drivers should evaluate the seat's shape and dimensions carefully to ensure a secure fit, particularly when selecting a seat for extended endurance racing sessions. FIA 8855-1999 Racing Seat Homologation The Sparco ULTRA Carbon carries FIA 8855-1999 homologation and is designed for use in motorsport applications requiring an approved fixed-back competition seat. Its lightweight carbon construction and competition-focused design make it suitable for professional and amateur racing applications where the seat complies with the applicable sanctioning body's regulations. Always verify the seat's homologation label, expiration requirements, mounting configuration, and competition eligibility before installation. Sparco ULTRA Carbon Racing Seat Specifications Manufacturer: Sparco Model: ULTRA Carbon Manufacturer Part Number: 008037ZNR Seat Type: Fixed-Back Competition Racing Seat FIA Homologation: FIA 8855-1999 Shell Material: Pre-Preg Carbon Fiber Construction: Lightweight Carbon Fiber Monocoque Weight: Approximately 8.3 lbs (3.8 kg) Finish: Exposed Black Carbon Fiber Upholstery: None – Bare Carbon Shell Size: Single-Size Competition Shell Fitment Guidance: Approximately Medium/Large, up to 36-inch waist depending on driver build Mounting: Side-Mount Configuration Applications: Auto Racing, Time Attack, Club Racing, and Track-Focused Competition Vehicles Sparco ULTRA Carbon Racing Seat Dimensions Proper seat measurements are especially important when installing a fixed-back racing seat in a narrow cockpit or competition vehicle with roll cage clearance restrictions. The dimensions below are based on the supplied product dimension drawing. Front Overall Width: 17.76 inches (451 mm) Rear Overall Width: 17.13 inches (435 mm) Front Mounting Width: 14.72 inches (374 mm) Rear Mounting Width: 13.90 inches (353 mm) Overall Height: 33.46 inches (850 mm) Overall Depth: 29.53 inches (750 mm) Side Mounting Hole Spacing: 11.42 inches (290 mm) Fitment Note: Measure the available cockpit width, roll cage clearance, mounting points, seat height, and driver position before purchasing. Dimensions should be confirmed against the current manufacturer's technical drawing before fabrication or permanent installation. Why Choose the Sparco ULTRA Carbon Racing Seat? The Sparco ULTRA Carbon is designed for racers who prioritize low weight, compact fitment, and direct driver feedback. Its pre-preg carbon fiber construction, minimalist seating surface, and ergonomic monocoque shape distinguish it from conventional fabric-covered racing seats. For competition vehicles where every pound matters, the ULTRA Carbon offers an exceptional combination of advanced materials, purposeful engineering, and professional racing aesthetics. Sparco ULTRA Carbon Racing Seat Frequently Asked Questions How much does the Sparco ULTRA Carbon Racing Seat weigh? The Sparco ULTRA Carbon has a listed weight of approximately 8.3 lbs (3.8 kg), making it an exceptionally lightweight fixed-back competition seat. Is the Sparco ULTRA Carbon FIA approved? Yes. The seat carries FIA 8855-1999 homologation. Verify the seat's homologation label and your racing organization's eligibility requirements before competition. What is the Sparco ULTRA Carbon made from? The seat uses high-strength pre-preg aerospace-grade carbon fiber, commonly referred to as dry carbon, to achieve a high strength-to-weight ratio. Does the Sparco ULTRA Carbon come with padding? The ULTRA Carbon is designed for use without conventional fabric upholstery or foam padding. Its sculpted carbon shell provides the primary seating surface. What size driver fits the Sparco ULTRA Carbon Racing Seat? The seat is offered in a single-size configuration, commonly described as a Medium/Large fit for drivers with approximately a 36-inch waist or smaller. Actual fit depends on hip width, torso dimensions, driving position, and personal preference. Can the Sparco ULTRA Carbon fit into a narrow race car cockpit? Yes. Its compact shell and narrow exterior design make it especially suitable for applications where traditional racing seats may have clearance issues. Always verify dimensions before installation. What mounting brackets are required? Sparco recommends the 600W or 600W90 aluminum side-mount brackets for installation due to the ULTRA Carbon's unique shell geometry. Does the Sparco ULTRA Carbon include seat brackets? Mounting brackets are separate components unless specifically included in a product bundle. Vehicle-specific installation hardware may also be necessary. Can the Sparco ULTRA Carbon improve driving position? Its slim carbon construction and compatible low-position side mounting can allow a lower seating position, depending on the vehicle and installation. Is the Sparco ULTRA Carbon suitable for track days and racing? Yes. The seat is intended for competition motorsport applications, including track-focused builds, time attack, and club racing where the installation and homologation meet event requirements. Shop the Sparco ULTRA Carbon Racing Seat Experience premium carbon fiber seat construction engineered for the demands of serious motorsport competition. With its exceptionally lightweight monocoque shell, FIA 8855-1999 homologation, narrow cockpit fitment, and low seating position, the Sparco ULTRA Carbon delivers the performance-focused design racers expect from Sparco. Upgrade your race car with the Sparco ULTRA Carbon Racing Seat and experience an exceptionally direct, lightweight driving position.  

Sparco X-Light FE Infinity Driver Race Suit FULL EFFICIENCY TECHNOLOGY EXPANDED TO THE X-LIGHT INFINITY SUIT LINE Sparco X-Light FE Infinity Driver Race Suit The Sparco X-Light FE Infinity Driver Race Suit combines professional-level fire protection, lightweight comfort, extensive stretch construction, and Sparco Full Efficiency technology. Designed for drivers who want maximum mobility without excessive weight or bulk, the X-Light FE Infinity delivers a close, comfortable fit in the seated driving position. The suit is constructed with regenerated materials recovered from Sparco’s production processes. This Full Efficiency approach helps reduce material waste and lowers the environmental impact of manufacturing while maintaining the safety, durability, and performance required for competitive motorsports. A lightweight two-layer construction provides FIA-approved protection while remaining soft and breathable. Pre-curved fully floating sleeves, stretch elbow panels, multidirectional rear stretch zones, full-length side panels, and an inner-thigh stretch insert allow the suit to move naturally with the driver inside the cockpit. Sparco Full Efficiency Technology Sparco Full Efficiency technology uses regenerated fibers and carefully controlled production processes to reduce waste without compromising performance. The X-Light FE Infinity is developed through a Life Cycle Assessment approach that evaluates the environmental impact of the product throughout its manufacturing cycle. Using regenerated materials from Sparco’s production process helps reduce CO₂ emissions by approximately 7 kg per suit. This gives drivers a more environmentally responsible option while preserving the protection and comfort expected from a premium Sparco racing suit. Lightweight Two-Layer Construction The X-Light FE Infinity uses a lightweight two-layer design engineered to provide dependable heat and flame protection with less bulk than many traditional racing suits. The soft interior and breathable outer construction help improve comfort during sprint races, endurance events, qualifying sessions, and extended track use. Fully Floating Pre-Curved Sleeves Pre-curved sleeves place the arms in a natural driving position, helping reduce pulling across the shoulders and elbows. The fully floating sleeve construction allows the arms to move independently from the torso for smoother steering and shifting movements. Stretch panels at the elbows provide additional flexibility when the arms are bent, helping reduce resistance and fatigue during long sessions behind the wheel. Multidirectional Rear Stretch Panel A large multidirectional stretch panel across the lower back allows the upper portion of the suit to move with the driver. This helps reduce tension across the shoulders, back, and waist when seated and secured by a racing harness. The anti-abrasion construction improves durability in an area that frequently contacts the racing seat while maintaining the flexibility needed for entering and exiting the vehicle. Full Side Stretch Construction Stretch panels extend along the sides of the suit from beneath the arms toward the thighs. These flexible zones allow the torso and hips to move naturally while helping the suit maintain a close, streamlined fit. The side construction is particularly beneficial when reaching for controls, turning the steering wheel, climbing into a restricted cockpit, or remaining seated for extended periods. Breathable Inner-Thigh Insert A breathable stretch panel extends through the inner-thigh and groin area to improve flexibility and airflow in a high-heat zone. This construction reduces pulling around the legs and hips while promoting greater comfort during intense driving conditions. Ultra-Flat Internal Seams Ultra-flat seams help reduce bulky areas and pressure points inside the suit. The low-profile construction improves comfort where the suit contacts the seat, harnesses, fire-resistant underwear, and other driver equipment. Reducing internal friction can help limit irritation and fatigue during endurance races and other events involving long periods in the cockpit. Seamless Wrist and Ankle Cuffs Soft seamless cuffs provide a close, comfortable fit around the wrists and ankles. Their streamlined construction reduces unnecessary bulk beneath racing gloves and shoes while helping prevent uncomfortable pressure points. Adjustable Waist Belt An adjustable hook-and-loop waist belt allows the driver to fine-tune the fit around the torso. The belt helps stabilize the suit without restricting movement and maintains a clean profile in the seated driving position. Hidden Pockets Discreet pockets provide space for small essentials without disrupting the suit’s streamlined appearance. Their low-profile construction helps prevent unnecessary bulk around the cockpit and harness areas. Infinity Graphic Design The X-Light FE Infinity adds a distinctive full-body graphic treatment to Sparco’s advanced X-Light FE platform. The printed design creates a modern professional appearance without relying on heavy decorative panels or excessive embroidery. Sparco X-Light FE Infinity Race Suit Features Premium lightweight professional driver racing suit Sparco Full Efficiency regenerated-material technology Life Cycle Assessment-based product development Approximately 7 kg reduction in CO₂ emissions per suit Lightweight two-layer construction FIA 8856-2018 homologated Distinctive full-body Infinity graphic design Pre-curved arms for a natural driving position Fully floating sleeve construction Stretch elbow panels Multidirectional rear stretch panel Anti-abrasion elasticated lower-back construction Full-length side stretch panels Breathable inner-thigh and groin stretch insert Ultra-flat internal seams Soft seamless wrist and ankle cuffs Adjustable hook-and-loop waist belt Low-profile hidden pockets Designed for comfort in the seated driving position Available in European sizes 48–66 Technical Specifications Product: Sparco X-Light FE Infinity Driver Race Suit Manufacturer: Sparco Product Code: BRS0007B0 Construction: Lightweight two layer Material Technology: Sparco Full Efficiency regenerated fibers Environmental Development: Life Cycle Assessment certified process Estimated CO₂ Reduction: Approximately 7 kg per suit Sleeves: Pre-curved and fully floating Stretch Areas: Elbows, lower back, sides, groin, and inner thighs Seams: Ultra-flat internal construction Cuffs: Seamless wrist and ankle cuffs Waist Adjustment: Hook-and-loop belt Pockets: Hidden low-profile pockets Certification: FIA 8856-2018 European Sizes: 48–66 Sparco X-Light FE Infinity Driver Race Suit Sizing Chart Frequently Asked Questions Is the Sparco X-Light FE Infinity Race Suit FIA approved? Yes. The Sparco X-Light FE Infinity is homologated to the FIA 8856-2018 standard. Drivers should confirm the current equipment requirements for their racing organization, vehicle class, and event. How many layers does the X-Light FE Infinity have? The current Sparco X-Light FE Infinity uses a lightweight two-layer construction designed to provide certified protection while reducing unnecessary weight and bulk. What does Full Efficiency mean? Sparco Full Efficiency technology uses regenerated materials recovered from the company’s production processes. The program is designed to reduce waste and environmental impact while preserving racing performance and safety. How does the suit reduce its environmental impact? The use of regenerated materials helps reduce manufacturing waste and is estimated to lower CO₂ emissions by approximately 7 kg per suit. The product is also developed through a Life Cycle Assessment approach. Does the X-Light FE Infinity provide good mobility? Yes. The suit includes fully floating sleeves, stretch elbow panels, a multidirectional lower-back panel, full side stretch zones, and a flexible inner-thigh insert for excellent freedom of movement. Is the suit comfortable for endurance racing? Yes. Its lightweight construction, breathable inserts, seamless cuffs, ultra-flat seams, and extensive stretch zones make it well suited to endurance racing and other events involving long periods behind the wheel. What is the difference between the X-Light FE and X-Light FE Infinity? The Infinity version uses the performance and Full Efficiency construction of the X-Light FE while adding a distinctive full-body printed graphic design. Does the suit have pockets? Yes. The X-Light FE Infinity includes hidden pockets designed to provide discreet storage without adding unnecessary bulk to the suit. What sizes are available? The Sparco X-Light FE Infinity Driver Race Suit is available in European sizes 48 through 66. How should the Sparco X-Light FE Infinity fit? The suit should fit comfortably in the seated driving position without pulling tightly across the shoulders, back, waist, or legs. It should provide enough room for approved fire-resistant underwear without excessive loose material. How should the race suit be cleaned? Follow the cleaning instructions printed on the suit’s internal care label. Close the zipper and hook-and-loop sections before washing, use a mild approved detergent, and avoid bleach, fabric softener, or excessive heat. Lightweight Performance with a More Sustainable Design The Sparco X-Light FE Infinity Driver Race Suit gives serious competitors FIA-approved protection, extensive freedom of movement, and lightweight comfort in a distinctive professional design. Its regenerated materials, two-layer construction, breathable stretch zones, fully floating sleeves, and ultra-flat seams make it an excellent choice for drivers who value performance, comfort, and reduced environmental impact.

Sparco X-Light FE Driver Race Suit Full Efficiency Tech Extended to the X-Light Suit Line The Sparco X-Light Full Efficiency Race Suit offers superior lightweight comfort with a focus on sustainability, crafted from regenerated materials to reduce waste while maintaining top-tier safety standards. Engineered with cutting-edge features like breathable inserts and ultra-flat seams, it ensures the ultimate in comfort, protection, and eco-responsibility. Key features, benefits, and outcomes: Regenerated Material Construction: Utilizes recycled fabric from Sparco's production process, reducing waste and CO₂ emissions by 7kg per suit, benefiting the environment without sacrificing performance or safety. 2-Layer Lightweight Design: Incorporates Sparco’s latest lightweight materials, ensuring high-level protection while keeping weight at a minimum, allowing you to perform without added bulk. Breathable Inserts in Groin Area: Provides targeted airflow in high-heat zones, promoting cooling during intense driving sessions and enhancing comfort. Fully Floating Pre-Curved Sleeves: Uses advanced fabric construction for unrestricted arm movement, giving you optimal flexibility and reducing muscle strain during extended wear. Anti-Abrasion Elasticated Lower Back Panel: Ensures a snug fit without restriction in the seated position, minimizing friction and discomfort for a smoother driving experience. Ultra-Flat Internal Seams: Reduces pressure points, decreasing fatigue over long periods by minimizing internal friction against the skin. Seamless Cuffs and Ankles: Delivers a sleek, irritation-free finish around extremities, enhancing comfort and ease of movement. Hidden Pockets: Discreet storage options within the suit, providing secure space for small essentials without affecting the suit's fit or profile. Adjustable Velcro Belt: Allows you to fine-tune the fit for your body, ensuring stability and comfort throughout the race. Fully focused on delivering exceptional heat and flame protection, the Sparco X-Light Full Efficiency Race Suit keeps you both safe and comfortable during high-intensity drives. The breathable inserts channel airflow exactly where you need it, reducing heat buildup so you stay cool under pressure. Ultra-flat seams and seamless cuffs minimise potential pressure points, which means reduced fatigue even over prolonged sessions. With its precision-engineered design, every component works together to ensure freedom of movement, preventing restriction during those crucial moments on the track. Choose a suit that combines environmental responsibility with race-grade performance. Experience the Sparco X-Light Full Efficiency Race Suit and see the difference in comfort, protection, and eco-conscious engineering. The hallmark of the Sparco X-Light FE race suit is its innovative, advanced design with an extra focus on comfort and efficiency using 70% regenerated fibers and is LCA Certified. The Sparco X-Light race suit pushes the boundaries of Sparco’s revolutionary lightweight race suit design, using a lightweight Nomex outer layer along with an ultra-soft inner layer comprised of 90% regenerated fibers which provides superior fire protection with a comfortable feel. The Sparco X-Light features stretch panel technology derived from Sparco's Hocotex® Eagle suit. This specially-engineered stretch fabric is lighter and more durable than traditional elastic fabric. The Sparco X-Light race suit has pre-curved fully floating sleeves with stretch elbow panels, multi directional back stretch panels along with full side stretch panels that run from under the arm to the thighs. The X-Light race suit has another unique feature which is a breathable stretch panel that runs from inner thigh to inner thigh. The X-Light suit has the most stretch panels of any Sparco suit which gives ultimate comfort in the seated driving position. The X-Light FE is available in three colors in sizes from EU48-66. The X-Light FE race suit is FIA 8856-2018 approved. Sparco X-Light FE Driver Race Suit Details: Lightweight, comfortable fabric weighs a mere 270g/m2 Three-layer construction for maximum protection Pre-curved arms with elbow stretch panels Fully floating knit sleeves Multi-directional rear stretch panels create a fully-floating upper Full side mesh stretch panel Inner thigh mesh stretch panel FIA 8856-2018 homologated Sparco X-Light FE Driver Race Suit Sizing Chart

Sparco Martini Racing Driver Suit The Golden Age of Rally Racing Brought Back to Life! In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best racing drivers in the world. Now this partnership is renewed, and fans of the Martini Racing historical livery have access to beautiful re-creations of the original Sparco products. All of Sparco's Martini Racing reproductions have been updated with the newest Sparco safety technology and carry current FIA homologations. Classic Racing Heritage Meets Modern Technology The Sparco Martini Racing Replica Race Suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability, and comfort when compared to the original worn back in the day. The suit features iconic Martini Racing embroideries and patches to faithfully recreate the original look. The Martini Racing replica race suit is made from Sparco's latest generation fabrics, offering a soft, lightweight outer fabric and breathable inserts at the sides, plus a large lower-back stretch panel for maximum comfort. The Sparco Martini Racing Replica Race Suit also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and Sparco's signature epaulettes. Available in sizes EU48 - EU66. Sparco Martini Replica Race Suit Details: Martini Racing embroideries Lightweight three-layer fabric Pre-curved arms  Lightweight zipper and collar Breathable stretch panels FIA 8856-2018 approved

Sparco Gulf Racing Driver Suit The Golden Age of Endurance Racing Brought Back to Life! In the golden years of endurance racing, Sparco and Gulf Racing contributed to the triumphs of the best racing drivers in the world. Now this partnership is renewed, and fans of the Gulf Racing historical livery have access to beautiful re-creations of the original Sparco products. All of Sparco's Gulf Racing reproductions have been updated with the newest Sparco safety technology and carry current FIA homologations. Classic Racing Heritage Meets Modern Technology The Sparco Gulf Racing Replica Race Suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability, and comfort when compared to the original worn back in the day. The suit features iconic Gulf Racing embroideries and patches to faithfully recreate the original look. The Gulf Racing replica race suit is made from Sparco's latest generation fabrics, offering a soft, lightweight outer fabric and breathable inserts at the sides, plus a large lower-back stretch panel for maximum comfort. The Sparco Gulf Racing Replica Race Suit also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and Sparco's signature epaulettes. Available in sizes EU48 - EU66. Sparco Gulf Replica Race Suit Details: Gulf Racing embroideries Lightweight three-layer fabric Pre-curved arms  Lightweight zipper and collar Breathable stretch panels FIA 8856-2018 approved Suit only (shoes, helmet, gloves, balaclava, house and car not included)

Sparco Superleggera Driver Race Suit The Sparco Superleggera Driver Race Suit is built for drivers who want premium protection, extremely low weight, and maximum mobility in the cockpit. Known as one of the lightest FIA 8856-2018 approved racing suits available, the Superleggera combines advanced fire-resistant construction with stretch panel technology for exceptional comfort during long sessions and competitive racing. The Sparco Superleggera is designed with special four-way stretch panels that run from the underarm down to the hip, helping the suit move naturally with the driver while seated. These side stretch panels work together with a rear stretch panel, breathable inner thigh stretch panel, 360-degree floating arm gussets, and pre-curved arms and legs to reduce restriction and improve comfort behind the wheel. FIA 8856-2018 and SFI 3.2A/5 approved, the Sparco Superleggera auto racing suit is a top choice for racers who need certified protection with a lightweight, high-mobility fit. Sparco Superleggera Race Suit Details FIA and SFI Approved: FIA 8856-2018 and SFI 3.2A/5 approved for competition use. Ultra-Lightweight Construction: One of the lightest FIA-approved Sparco race suits available. Four-Way Stretch Panels: Stretch panels run from the underarm down to the hip for excellent mobility. Rear Stretch Panel: Improves flexibility and comfort while seated in the driving position. 360 Floating Arm Gussets: Allows natural arm movement with reduced restriction while steering. Pre-Curved Arms and Legs: Ergonomic fit helps reduce bunching inside the cockpit. Inner Thigh Stretch Panel: Breathable stretch zone improves comfort during long driving sessions. Lightweight Zipper and Collar: Helps reduce bulk while maintaining a clean race-ready fit. Why Choose the Sparco Superleggera Driver Race Suit? The Sparco Superleggera Driver Race Suit is ideal for racers who want a lightweight, comfortable, and certified fire-resistant suit. Its stretch construction, floating arm gussets, pre-curved design, and breathable panels make it one of the most comfortable Sparco race suits for serious competition use. Sparco Superleggera Race Suit Sizing Chart

Sparco ULTRA QRT Racing Seat  Ultra-lightweight racing seat performance without the premium price of carbon fiber. The Sparco ULTRA Racing Seat combines advanced fiberglass composite construction, a minimalist design, and exceptionally low weight to deliver a competition-ready seat for serious motorsport enthusiasts. Weighing just 11.4 lbs (5.2 kg), the Sparco ULTRA is one of the lightest fiberglass competition seats in the Sparco lineup. Its innovative QRT Ultra-Light Technology and exposed composite shell eliminate traditional fabric upholstery and padding, helping reduce weight while improving the driver's connection to the vehicle. Designed specifically for narrow cockpits, the ULTRA provides an exceptionally compact exterior profile while accommodating standard- to larger-build drivers. Its sculpted monocoque shell delivers ergonomic lumbar support, natural recline, and a low seating position without unnecessary bulk. With FIA 8855-1999 homologation, the Sparco ULTRA delivers professional motorsport construction for drivers looking to reduce vehicle weight, optimize cockpit space, and improve their racing position. Sparco ULTRA Racing Seat Key Features FIA 8855-1999 Approved: Homologated fixed-back competition racing seat. Ultra-Lightweight Design: Weighs approximately 11.4 lbs (5.2 kg). Advanced Fiberglass Construction: Lightweight composite shell engineered for exceptional strength and rigidity. QRT Ultra-Light Technology: Sparco composite manufacturing technology designed to minimize weight without sacrificing performance. Unpadded Racing Shell: Eliminates traditional upholstery and foam cushioning for maximum weight reduction. Low Seating Position: Minimalist shell design allows drivers to sit closer to the vehicle floor when appropriately mounted. Narrow Cockpit Compatibility: Compact exterior dimensions accommodate space-constrained race car interiors. Integrated Lumbar Contouring: Ergonomic shell shape provides natural back and lumbar support. Direct Chassis Feedback: Rigid construction helps drivers feel vehicle movement more directly. Integrated Harness Openings: Designed to accommodate compatible multi-point racing harnesses. Side-Mount Configuration: Compatible with appropriate competition seat mounting brackets. Exposed Composite Finish: Purpose-built racing appearance without conventional upholstery. What Is Sparco QRT Ultra-Light Technology? QRT stands for Quick Resin Tech, Sparco's advanced composite manufacturing technology developed to reduce racing seat weight while maintaining excellent structural performance. Developed in Sparco's OEM Composite Laboratory in Italy, QRT technology utilizes advanced fiberglass manufacturing processes inspired by aerospace composite construction. This technology allows Sparco to manufacture fiberglass racing seat shells with substantially less weight than many conventional fiberglass designs, approaching the performance characteristics of more expensive carbon fiber alternatives. The Sparco ULTRA takes this weight-saving philosophy even further by eliminating traditional seat upholstery and padding. The result is an exceptionally lightweight racing seat that delivers an outstanding balance of affordability, structural rigidity, and professional motorsport performance. 11.4-Pound Ultra-Lightweight Racing Seat Weight reduction is one of the most effective ways to improve overall race car performance. Reducing unnecessary vehicle mass can benefit acceleration, braking, handling, and responsiveness. At approximately 11.4 lbs, the Sparco ULTRA provides significant weight-saving potential compared with heavier upholstered competition seats. Its fiberglass composite monocoque construction eliminates unnecessary material while preserving a rigid and supportive shell. For drivers building lightweight track cars, time attack vehicles, or dedicated competition machines, the ULTRA provides a practical alternative to more expensive carbon fiber seats. Minimalist Shell Design for Maximum Driver Feedback The Sparco ULTRA Racing Seat is engineered to be used without conventional fabric upholstery or foam padding. By removing these components, Sparco reduces overall weight and creates a more direct physical connection between the driver and the vehicle. The rigid fiberglass shell allows drivers to experience vehicle movement and lateral loading with less cushioning between their body and the seat structure. Its contoured seating surface provides natural support through an ergonomically designed backrest, lumbar section, and lower seat profile. This unique approach combines lightweight construction with a focused, competition-oriented driving experience. Low Seating Position for Better Cockpit Fitment The Sparco ULTRA's minimalist construction can help drivers achieve a lower seating position compared with traditional padded racing seats, depending on the vehicle and mounting arrangement. A lower seating position can offer several advantages in dedicated competition vehicles. Additional helmet clearance beneath roll cages and roof structures Improved driver positioning in low-roof vehicles More flexibility when positioning the steering wheel and pedals Reduced seating height for drivers with longer torsos Potential for a lower driver center of gravity The actual installed height depends on the seat brackets, mounting points, floor configuration, and driver requirements. Designed for Narrow Racing Cockpits The Sparco ULTRA is particularly well suited to race cars with limited interior space. Its compact fiberglass shell helps accommodate vehicles equipped with roll cages, door bars, center tunnels, and specialized racing equipment. Despite its narrow exterior design, the ULTRA offers an ergonomically contoured seating area intended to accommodate a range of driver builds. This makes it an appealing option for compact sports cars, track-focused builds, and custom racing applications where conventional competition seats may create clearance problems. FIA 8855-1999 Racing Seat Homologation The Sparco ULTRA carries FIA 8855-1999 homologation, making it suitable for motorsport applications that accept this competition seat standard. Its fixed-back fiberglass construction is designed for the structural and safety requirements of competitive motorsport. Always verify the seat's homologation label, expiration date, installation requirements, and eligibility under your racing organization's current regulations. Sparco ULTRA Racing Seat Specifications Manufacturer: Sparco Model: ULTRA Manufacturer Part Number: 008037FNR Product Type: Fixed-Back Competition Racing Seat Homologation: FIA 8855-1999 Shell Material: Lightweight Fiberglass Composite Construction: QRT Ultra-Light Composite Technology Weight: Approximately 11.4 lbs (5.2 kg) Finish: Black Exposed Composite Upholstery: None Size: Single Size Fitment Guidance: Medium/Large – approximately up to a 36-inch waist, depending on driver proportions Mounting: Side-Mount Configuration Recommended Applications: Track Days, Club Racing, Time Attack, and Dedicated Competition Vehicles Sparco ULTRA Racing Seat Sizing Chart The Sparco ULTRA utilizes a competition-oriented side-mount configuration designed to accommodate its unique fiberglass shell. Due to the seat's low-profile construction, compatible side-mount brackets are necessary to position the seat correctly and securely within the vehicle. Mounting hardware and brackets must be selected according to the seat's mounting specifications and the vehicle's installation requirements. Important: Verify bracket compatibility and the required mounting bolt specifications before installation. Universal seat mounts may not accommodate the ULTRA's shell geometry. Vehicle-specific seat mounting components may be required and are sold separately unless otherwise stated. Sparco ULTRA Racing Seat Size and Dimensions The Sparco ULTRA is offered in a single-size configuration intended to accommodate standard- to larger-build drivers while maintaining a compact exterior footprint. Its narrow shell design makes it particularly useful for racing applications where cockpit width and roll cage clearance are limited. Driver Fitment: Approximately Medium/Large, generally suitable for drivers with waist measurements up to 36 inches, depending on hip width, torso proportions, and seating preference. Published dimensions for the Sparco ULTRA fiberglass seat include: Maximum Front Width: 17.76 inches (451 mm) Maximum Rear Width: 17.13 inches (435 mm) Front Mounting Width: 14.72 inches (374 mm) Rear Mounting Width: 13.90 inches (353 mm) Overall Height: 33.46 inches (850 mm) Side Mounting Spacing: 11.42 inches (290 mm) Fitment Recommendation: Measure the available cockpit width, seat rail placement, roll cage clearance, and driver seating position before ordering. Confirm critical dimensions against the current Sparco technical drawing for the ULTRA fiberglass seat. Sparco ULTRA vs. Sparco ULTRA Carbon Racing Seat Both Sparco ULTRA models share a minimalist design philosophy focused on lightweight construction, narrow cockpit compatibility, and direct driver feedback. The primary difference is the shell material and weight. Specification Sparco ULTRA Sparco ULTRA Carbon Shell Construction Fiberglass Composite Pre-Preg Carbon Fiber Approximate Weight 11.4 lbs 8.3 lbs FIA Homologation 8855-1999 8855-1999 Traditional Upholstery None None Design Focus Lightweight Performance and Value Maximum Weight Reduction The Sparco ULTRA fiberglass seat is an excellent option for drivers seeking ultra-lightweight performance at a more accessible price point. The ULTRA Carbon is designed for competitors prioritizing the absolute lowest possible seat weight through advanced carbon fiber construction. Sparco ULTRA Racing Seat Frequently Asked Questions How much does the Sparco ULTRA Racing Seat weigh? The Sparco ULTRA weighs approximately 11.4 lbs (5.2 kg), making it one of Sparco's lightest fiberglass racing seats. Is the Sparco ULTRA FIA approved? Yes. The Sparco ULTRA carries FIA 8855-1999 homologation. Competition eligibility depends on the seat's homologation status and the racing organization's current regulations. What is the Sparco ULTRA Racing Seat made from? The seat is manufactured from lightweight fiberglass composite material using Sparco's advanced composite technology. What is QRT technology? QRT stands for Quick Resin Tech, a Sparco composite manufacturing technology developed to reduce fiberglass shell weight while maintaining structural performance. Does the Sparco ULTRA include seat padding? No. The ULTRA is designed for use without conventional fabric upholstery or foam padding. Its contoured composite shell provides the seating surface. What size driver fits the Sparco ULTRA? The seat is offered in a single-size configuration, generally described as Medium/Large and suitable for drivers with waist measurements up to approximately 36 inches. Driver fit depends on body proportions and should be evaluated before purchasing. Is the Sparco ULTRA suitable for narrow race car interiors? Yes. Its compact exterior design makes it particularly suitable for race cars with limited cockpit space, although vehicle-specific clearance must be confirmed. Does the Sparco ULTRA provide a lower seating position? Its minimalist, unpadded shell can help achieve a lower seating position when installed with compatible brackets and appropriate vehicle mounting points. What is the difference between the ULTRA and ULTRA Carbon? The standard ULTRA uses lightweight fiberglass composite construction and weighs approximately 11.4 lbs. The ULTRA Carbon uses pre-preg carbon fiber and weighs approximately 8.3 lbs, providing additional weight savings. Are seat mounting brackets included? Mounting brackets and vehicle-specific installation hardware are separate unless specifically listed as included. Confirm the required bracket and fastener specifications before installation. Can the Sparco ULTRA be used for track days and club racing? Yes. The ULTRA is designed for motorsport applications, including track days, time attack, and competition events that accept its homologation and mounting configuration. Shop the Sparco ULTRA Lightweight Racing Seat Experience professional motorsport seat technology with the Sparco ULTRA Racing Seat. Combining an ultra-lightweight fiberglass composite shell, FIA 8855-1999 homologation, minimalist ergonomics, and compact cockpit fitment, the ULTRA delivers performance-focused engineering for serious drivers. Whether you're building a lightweight track car or upgrading a dedicated competition vehicle, the Sparco ULTRA offers exceptional weight-saving potential and a direct connection to your race car. Upgrade to the Sparco ULTRA Racing Seat and experience the advantages of lightweight competition seating.

Sparco EVO Carbon Fiber Racing Seats 2028 Expiry As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover).  The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. Sparco EVO Racing Seat Sizes The Sparco EVO series is among the most versatile competition seats we carry, available in the following size to ensure proper fitment: EVO L – Large (up to 36” waist)   Sparco EVO QRT Racing Seat Features Ultralight Pre-Preg Carbon Fiber shell Excellent fitment into small vehicle cockpits Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA 8859-1999 approved EVO Carbon Fiber Racing Seat Dimensions

Sparco Martini Legend Kevlar Racing Seat THESE SEATS ARE BRAND NEW BUT HAVE A FIA 2026-Expiry Rev up your racing experience with the Sparco Martini Legend Kevlar race seat, a meticulously crafted seat with a winning combination of Kevlar and carbon fiber. Engineered for unparalleled performance, safety and style, this race seat is the pinnacle of motorsport excellence. With its exceptional construction and iconic design, it's no wonder this seat is at the top of every racing enthusiast's wishlist. Sparco: An Unrivaled Performance Heritage The Sparco Martini Legend Kevlar race seat boasts an innovative construction that combines lightweight Kevlar and dry carbon fiber. This fusion provides outstanding strength, rigidity, and durability while maximizing safety. The seat's ergonomic design ensures maximum comfort during intense races, allowing you to maintain full control of your vehicle at high speeds. Martini Legend Kevlar Seat Safety Safety is of utmost importance in motorsports, and the Sparco Martini Legend Kevlar race seat excels in this aspect. It meets the stringent FIA 8855-1999 safety standard, guaranteeing optimal protection in an impact. The seat features integrated head and shoulder protection, bolstered side supports, and deep thigh cushions to minimize the risk of injury. With this seat, you can race with confidence, knowing that your well-being is prioritized. Iconic Martini Racing Style Stand out on the track with the legendary Martini Racing design adorning the Sparco Martini Legend Kevlar race seat. The iconic Martini Racing colors are proudly displayed on this seat, instantly recognizable by racing enthusiasts worldwide. This timeless aesthetic, combined with the impeccable craftsmanship of Sparco, creates a seat that not only performs but also captivates attention. Join the elite ranks of motorsport legends and elevate your racing to new heights with the Sparco Martini Legend Kevlar race seat. Immerse yourself in the race with its Kevlar and carbon fiber construction, delivering unrivaled performance, safety, and iconic style. Don't settle for anything less than the best – equip yourself with a seat that embodies the essence of motorsport excellence. Purchase yours today and experience the thrill of true racing mastery. Sparco Legend Kevlar Race Seat Size Medium / Large (up to 36” waist) Sparco Martini Legend Kevlar Seat Details Ultra lightweight dry carbon/Kevlar shell Bottom mount only Excellent ergonomics FIA 8855-1999 approved

Sparco Eagle LTD Driver Race Suit   The Eagle LTD is newest evolution of the Eagle race suit. The new Eagle LTD race suit features an updated, softer HOCOTEX® material which is 30% thinner. The Eagle LTD features an all-new design with four new colorways. The Eagle LTD race suit carries the newest FIA homologation. Single-Layer Construction, Multi-Layer Performance The Eagle LTD is the latest iteration of the Eagle fabric and the result of over 3 years of R&D. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric. The Eagle LTD is FIA 8856-2018 homologated. Unprecedented Comfort Thanks to HOCOTEX®, the Eagle LTD is three times more breathable than a suit produced using traditional technology. The use of this relatively thinner fabric along with large side and back stretch panels and 360 degree arm gussets give the Eagle LTD ultimate flexibility and comfort. The Eagle LTD uses at new stretch material called Eagle fabric, which is lighter, more breathable, and more abrasion resistant than traditional stretch material. Improved Fire & Heat Resistance Traditional racing suits have layers of fabric sewn together in a quilted pattern. The quilting provides air space between the layers which bloats in a fire, this provides thermal protection to the driver. HOCOTEX® creates a honeycomb structure with internal air cells that ensure the driver even more fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Eagle LTD has over 60,000 microcell air chambers which provide a 10 to 12% increase in heat protection performance. Sparco Eagle LTD Driver Race Suit Details: Single layer construction, multi-layer protection 3X more breathable than a standard suit with full 360o arm gussets Large stretch panels on sides and back with new breathable fabric Reinforced arms and legs with anti-abrasive material Three years of research and development HOCOTEX® patented Sparco Technology made in Italy Available in four colorways FIA 8856-2018 homologated Sparco Eagle LTD Driver Race Suit Sizing Chart