Sparco S.p.A.
Sparco ADV XT Carbon Racing Seat
$8,300.00
Sparco ADV XT Carbon Racing Seat
The Sparco ADV XT is an ultra-lightweight carbon fiber racing seat engineered to meet the FIA’s highest seat rating, FIA 8862-2009. Tested to withstand ~70G impacts and over 6,600 lbs of lateral force, the ADV XT delivers top-tier strength with a relaxed, GT-oriented driving position for long stints and endurance comfort.
Energy-absorbing structures protect high-stress areas, while the self-extinguishing upholstery includes non-slip zones in the shoulders and seat base for secure support. HANS compatible and FIA approved when mounted with Sparco side-mount brackets #0049605.
Technology
Ultra-lightweight carbon fiber construction
FIA 8862-2009 approved; ~70G impact testing
GT-cockpit geometry with relaxed driving position
HANS device compatible
Fire-retardant, self-extinguishing upholstery
Non-slip shoulder and seat inserts
Dimensions
Competition Motorsport | sales@competitionmotorsport.com | (844) 438-7244
Sparco S.p.A.
Sparco ADV Prime Pad Carbon Racing Seat | FIA 8862-2009
$6,800.00
Sparco ADV Prime Pad Carbon Racing Seat | FIA 8862-2009
The Sparco ADV Prime Pad Carbon Racing Seat represents the ultimate in FIA 8862-2009 safety homologation, engineered for professional motorsport where maximum protection, rigidity, and weight savings are critical. Constructed from advanced carbon fiber with energy-absorbing foam and K-Point self-extinguishing fabric, this seat is built to perform at the highest levels of competition.
Advanced Carbon Safety Cell
The Sparco ADV Prime Pad is manufactured with a full carbon fiber monocoque shell, designed to exceed FIA 8862-2009 safety standards. It features a new lining design with removable double-density pads, a full-length cushion with separate leg rest, and self-extinguishing fabric for maximum fire resistance. Energy-absorbing padding is integrated for impact protection.
Sparco ADV Prime Pad Features
FIA 8862-2009 homologation (No. AS.095.21)
Lightweight carbon fiber shell for maximum rigidity and safety
New K-Point self-extinguishing fabric for durability and fire resistance
Removable double-density padding and full-length cushion for ergonomic comfort
Integrated energy-absorbing foam to meet FIA impact standards
M12 side mounting with 290 mm spacing for FIA-compliant installation
Add Sparco ADV Prime Side Mount Brackets (004990ADV)
Sparco ADV Prime Pad Carbon Racing Seat FAQs:
What is FIA 8862-2009? FIA 8862-2009 is the highest FIA homologation for seat safety, requiring the seat to withstand extremely high impact loads during testing.
Is this seat suitable for road use? No. FIA 8862-2009 seats are intended strictly for competition vehicles with approved mounting structures.
Can the padding be replaced? Yes. The ADV Prime Pad features removable double-density pads that can be replaced or adjusted for fit.
What mounting hardware do I need? This seat requires FIA-homologated side mounts using M12 bolts and 290 mm lateral spacing.
Does this seat expire? FIA 8862-2009 seats typically have a 10-year homologation life from the date of manufacture, with possible extensions depending on regulations.
Upgrade your race car with the Sparco ADV Prime Pad Carbon Racing Seat and meet the highest levels of safety, comfort, and performance on the track.
Sparco S.p.A.
Sparco ADV Prime Competition Pad Carbon Racing Seat | FIA 8862-2009
$5,750.00
Sparco ADV Prime Competition Pad Carbon Racing Seat | FIA 8862-2009
The Sparco ADV Prime Competition Pad Carbon Racing Seat represents the pinnacle of FIA 8862-2009 homologation technology, designed for professional drivers who demand uncompromising ergonomics, structural integrity, and comfort during the most demanding racing conditions. This seat combines a carbon fiber monocoque shell with advanced padding technology to deliver exceptional support and safety.
Compatibility
Universal fit for competition vehicles using FIA-homologated side-mount seat brackets
Compatible with GT, Touring, Rally, Endurance, and Prototype race cars
Requires FIA-compliant side mounting with M12 hardware and 290 mm lateral spacing
Professional-Grade Carbon Construction
The ADV Prime Competition Pad features a shaped backrest that envelops the driver for maximum support, with additional reinforcement in the lumbar area to improve posture and reduce fatigue during endurance events. Its removable double-density padding is designed for optimal comfort and adaptability, while the self-extinguishing fabric lining meets stringent FIA fire safety standards. Efficient carbon construction keeps weight low while exceeding FIA crash performance requirements.
Features
FIA 8862-2009 homologation (No. AS.099.22)
Carbon fiber monocoque shell with enhanced lumbar reinforcement
Ergonomic backrest design to envelop the driver’s torso
Removable double-density competition pads for custom fit
Self-extinguishing fabric lining for fire resistance
Efficient carbon construction for optimal strength-to-weight ratio
M12 side mounting with 290 mm spacing for FIA-compliant installation
Add Sparco ADV Prime Side Mount Brackets (004990ADV)
Sparco ADV Prime Competition Pad Carbon Racing Seat FAQs:
What makes this seat different from the standard ADV Prime? The Competition Pad version includes enhanced lumbar support and shaped padding for increased endurance comfort and precision driving feel.
Is this seat FIA 8862-2009 homologated? Yes. It meets FIA 8862-2009 standards and carries homologation number AS.099.22.
Can the pads be removed or replaced? Yes. The double-density pads are fully removable and replaceable, allowing for a custom fit.
Is this seat suitable for road cars? No. FIA 8862-2009 seats are designed exclusively for race vehicles with FIA-compliant mounting.
What is the expected lifespan? FIA 8862-2009 seats are typically valid for 10 years from manufacture, with potential extensions depending on regulations.
Equip your race car with the Sparco ADV Prime Competition Pad Carbon Racing Seat and experience the highest level of FIA-approved safety, ergonomics, and endurance comfort.
Sparco S.p.A.
Sparco SPX Carbon Reclining Seat (Non-FIA)
$3,400.00
Sparco SPX Reclining Seat (non-FIA)
The SPX is handcrafted in Italy using the same technology and materials used for OEM super cars. In fact, the SPX is the first carbon fiber reclining seat available to the public that meets the same specifications required by the OEM manufacturers and weighs only 28 pounds. What this means is that the attention to detail and quality put into the SPX cannot be matched by any other seat manufacturer on the market today.
The Sparco SPX seat represents the ultimate evolution of the sport seat. The SPX uses a combination of carbon fiber and advanced composites that give the driver both comfort and performance in a lightweight package. With the ergonomic shape of the carbon fiber backrest and the seating position of the RTM composite lower, the SPX holds the driver during extreme lateral forces and is comfortable for long road trips.
Beautifully Upholstered, Amazingly Light
The SPX is covered in a combination of beautifully perforated and buttery-smooth Italian leathers. The center of the SPX is covered in Alcantara suede to allow you to gain absolute control of your vehicle and enhance your driving experience. To finish off the performance look, all hand stitching is done in tone-on-tone black with the Sparco logo embroidered in matching black. The gloss finished carbon fiber backrest features a leather pull strap which releases the backrest to fold forward to allow access to a backseat or storage area. The backrest also features a micro adjustment knob that allows you to dial in the perfect driving position. The SPX is sold in driver and passenger versions (left and right).
Sparco SPX Carbon Reclining Seat Details
Lightest carbon fiber reclining seat on the market
Gloss carbon fiber back rest
RTM composite lower (an advanced composite with strength and weight similar to carbon fiber)
Covered in hand-stitched Italian leather and Alcantara suede
Leather pull for seat back release
Sold in driver (left) and passenger (right) configurations
This seat is not FIA compliant and is not intended for use in racing or other competition applications
SPX Seat Dimensions
A Little Sparco History
Sparco has designed and engineered some of the most advanced sport seats in the world, including the first-ever adjustable carbon fiber seat in 1998 for the Lamborghini Diablo. Since then, countless super cars such as the Bugatti Veyron and Lamborghini Aventador have used Sparco design and technology in their vehicles. In addition to seats, Sparco also produces carbon fiber body panels, bumpers, roofs and aerodynamic pieces, in addition to structural carbon fiber parts like stressed-member engine cradles and other chassis parts.
Supplying OEM manufacturers requires every part to pass demanding safety and durability tests. Sparco’s extensive expertise in carbon fiber technology is why they're a Tier One supplier for Alfa Romeo, AMG, Aston Martin, Audi, Bentley, Bugatti, Ferrari, Koenigsegg, Lamborghini and Lotus to name a few.
Sparco S.p.A.
Sparco Prime RF-10 Supercarbon |FIA 8860-2018
$2,999.00
Sparco Prime RF-10 Supercarbon FIA 8860-2018 Racing Helmet
The Sparco Prime RF-10 Supercarbon Racing Helmet is a premium carbon fiber auto racing helmet engineered for competitors who demand exceptional protection, lightweight construction, ventilation, and comfort. Designed for serious motorsport use, the Prime RF-10 Supercarbon combines an advanced carbon fiber shell with FIA 8860-2018 and Snell SA2020 certification.
A center visor locking system provides secure shield closure, while strategically positioned front air intakes and top exhaust vents help circulate air through the helmet and reduce heat and condensation. The removable interior lining can be taken out for cleaning, and factory-installed FHR posts provide compatibility with head-and-neck restraint systems.
FIA 8860-2018 Carbon Fiber Protection
The Sparco Prime RF-10 Supercarbon is constructed from carbon fiber to provide an exceptionally strong yet lightweight helmet shell. Its professional-level construction is designed for demanding motorsport environments where protection, weight reduction, and driver comfort are critical.
The helmet is approved to both FIA 8860-2018 and Snell SA2020 standards, making it suitable for a wide range of competitive auto racing applications where these certifications are accepted.
Advanced Helmet Ventilation
Front air intakes direct airflow through the helmet to help keep the driver comfortable and improve visor clarity during competition. Upper ventilation openings work as exhaust ports, allowing excess heat and moisture to escape from inside the helmet.
This ventilation system is especially beneficial during long sessions and high-temperature racing conditions where heat buildup and visor condensation can become distracting.
Secure Center Visor Locking System
The Sparco Prime RF-10 Supercarbon incorporates a center visor locking mechanism designed to provide a positive and secure visor closure while racing.
The helmet is supplied with a clear FIA-approved visor. A dark smoke visor is available separately for drivers who prefer reduced glare in bright conditions.
Removable and Washable Interior
The interior lining can be removed from the helmet for easier cleaning and maintenance. This allows racers to keep the helmet interior fresh after demanding race weekends, track days, and endurance events.
Drink System Ready
The Prime RF-10 Supercarbon is designed to accommodate an optional driver hydration system, allowing racers to integrate a drink setup for longer competition sessions and endurance racing.
Factory-Installed FHR Posts
Factory-fitted FHR posts are included with the helmet for compatibility with appropriate head-and-neck restraint systems.
Sparco Prime RF-10 Supercarbon Helmet Features
FIA 8860-2018 approved
Snell SA2020 approved
Advanced carbon fiber shell construction
Lightweight professional racing helmet design
Clear FIA-approved visor included
Center visor locking mechanism
Infinitely adjustable visor positioning
Front ventilation system promotes airflow through the helmet
Top exhaust ventilation helps remove heat and condensation
Removable interior lining for easier cleaning
Compatible with an optional driver drink system
Factory-installed FHR posts
Optional dark smoke visor available separately
Sparco Prime RF-10 Supercarbon Technical Specifications
Manufacturer: Sparco
Model: Prime RF-10 Supercarbon
Helmet Type: Full-face auto racing helmet
Shell Material: Carbon fiber
Certification: FIA 8860-2018
Snell Certification: SA2020
Visor: Clear FIA-approved visor included
Visor Lock: Center locking mechanism
Ventilation: Front air intakes with upper exhaust ventilation
Interior: Removable and washable lining
FHR Posts: Factory installed
Drink System: Optional system compatible
What's Included
Sparco Prime RF-10 Supercarbon racing helmet
Clear FIA-approved visor
Factory-installed FHR posts
Please Note: The Sparco Prime RF-10 Supercarbon is supplied with a clear visor. Images showing a dark smoke visor may feature the optional dark smoke visor, which is sold separately.
Sparco Prime RF-10 Supercarbon Sizing Chart
Sparco Prime RF-10 Supercarbon Questions & Answers
What certifications does the Sparco Prime RF-10 Supercarbon have?The helmet is approved to FIA 8860-2018 and Snell SA2020 standards.
Is the Sparco Prime RF-10 Supercarbon made from carbon fiber?Yes. The helmet uses a lightweight carbon fiber shell engineered for high-level motorsport protection.
What visor comes with the Sparco Prime RF-10 Supercarbon?The helmet is supplied with a clear FIA-approved visor.
Is the dark smoke visor included?No. The dark smoke visor shown in some product images is optional and sold separately.
Does the visor lock in the center?Yes. The Prime RF-10 Supercarbon uses a center visor locking mechanism designed to provide a secure visor closure.
Is the visor adjustable?Yes. The visor can be adjusted through its available opening range to suit driver preference and ventilation needs.
How is the Sparco Prime RF-10 Supercarbon ventilated?Air intakes at the front of the helmet direct airflow through the interior, while upper exhaust vents help remove heat and condensation.
Can the interior lining be removed?Yes. The helmet features a removable interior lining that can be taken out for cleaning.
Does the Sparco Prime RF-10 Supercarbon include FHR posts?Yes. Factory-installed FHR posts are included.
Can a drink system be installed?Yes. The helmet is designed to accommodate an optional driver hydration system.
How do I choose the correct Sparco Prime RF-10 Supercarbon size?Measure the circumference of your head with a flexible measuring tape and compare the measurement with the Sparco helmet sizing chart.
Should I replace the helmet after a crash?A racing helmet that has sustained a significant impact should be removed from service and evaluated or replaced according to the manufacturer's recommendations.
Sparco S.p.A.
Sparco SPR Reclining Seat (Non-FIA)
$2,500.00
Sparco SPR Reclining Seat (non-FIA)
The Sparco SPR is a premium sport seat that balances daily comfort with secure support for spirited driving. It shares the ergonomic philosophy of the SPX at a more accessible price, featuring a lightweight RTM composite shell and an OEM-derived recliner with dual side levers for quick, precise adjustment.
Upholstery combines durable synthetic leather with a soft-touch microsuede center for grip and comfort. Contoured bolsters help stabilize the torso under lateral load while maintaining long-trip comfort. Designed for street use; non-FIA.
Key Features
Lightweight RTM composite shell
OEM-style reclining mechanism with dual adjuster levers
Supportive bolsters and ergonomic padding
Synthetic leather with soft-touch microsuede center
Accepts many 4-point harnesses (fitment dependent)
Non-FIA; intended for street applications
Dimensions
A Little History
Sparco’s expertise spans OEM programs for supercar manufacturers and advanced carbon-composite development, informing the ergonomics and durability found in its street seat range.
Sparco S.p.A.
Sparco QRT-C Performance Carbon Fiber Racing Seat
$2,350.00
Sparco QRT-C Performance Carbon Fiber Racing Seat
The Sparco QRT-C Performance Carbon seat represents the luxury evolution of the QRT-C race seat. The QRT-C Performance Carbon uses the same FIA approved light-weight all-carbon fiber race shell as the QRT-C race seat but is covered in Italian Leather and Alcantara. The QRT-C Performance Carbon is constructed from “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The seats are handstitched in the Sparco OEM factory in Torino Italy.
The Sparco QRT-C Performance Carbon has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller cockpits. The QRT-C Performance can hold the driver during extreme lateral forces, but is also comfortable for long road trips. The QRT-C Performance Carbon seat is FIA Approved.
Sparco QRT-C Performance Carbon Racing Seat Size
Large – up to a 36” waist (pants size)
What Is Sparco QRT?
Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies.
QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point.
Sparco QRT-C Performance Carbon Racing Seat Features
Ultra-light carbon fiber shell
Excellent fitment in small cockpits
Medium/Large size driver fitment
Excellent ergonomics
Fire retardant fabric
Special non-slip fabric
FIA 8855-1999 approved
Dimensions
Sparco S.p.A.
Sparco EVO Performance Carbon Fiber Racing Seat | Med, Large or XL
$2,350.00
Sparco EVO Performance Carbon Fiber Racing Seats
The Sparco Evo Performance Carbon Fiber Seat looks as good on the street and it does on the track. Finished in soft and smooth leather with an alcantara center, this seat is at the Pinnacle of the Evo line. As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track!
The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover). The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved.
Sparco Evo Performance Seat Sizes
The Sparco EVO series is among the most versatile competition seats we carry, available in the following three sizes to ensure proper fitment:
EVO CARBON – Medium (up to 34” waist)
EVO L CARBON – Large (up to 36” waist)
EVO XL CARBON – X-Large (38” waist)
EVO QRT Racing Seat Features
Ultra-light pre-preg carbon fiber shell
Excellent fitment into small vehicle cockpits
Three sizes: Medium through XL
Excellent ergonomics
Leather and alcantara upholstery
FIA 8855-1999 approved
EVO Carbon Fiber Racing Seat Dimensions
EVO Std Dimensions:
EVO L / XL Dimensions:
Sparco S.p.A.
Sparco Prime Driver Race Suit
$2,300.00
Sparco Prime Driver Racing Suit
The Sparco Prime Driver Racing Suit is an ultralight professional racing suit developed to provide exceptional fire protection, breathability, and driver comfort. Originally developed for the McLaren Formula One team, every component has been optimized to reduce weight without sacrificing the protection required for competitive motorsports.
The Prime features a three-layer construction made with proprietary Sparco materials and premium DuPont Nomex fibers. Its specialized outer layer uses a double-faced Nomex Comfort mesh woven with Sparco’s Kompact system, creating a lightweight and breathable structure with effective anti-static properties.
Pre-curved arms and legs place the suit in a natural driving position, while an inner-thigh stretch panel improves mobility and reduces restriction inside the cockpit. Lightweight components, flattened stitching, and reduced padding help create a close, comfortable fit for sprint races, endurance events, and professional competition.
Ultralight Three-Layer Construction
The Sparco Prime uses an advanced three-layer construction engineered to reduce weight while maintaining dependable fire-resistant protection. Each layer is optimized to provide a balance of safety, breathability, and comfort during demanding racing conditions.
DuPont Nomex Comfort Outer Layer
The third outer layer is made from double-faced mesh constructed with original DuPont Nomex Comfort fibers. Sparco’s Kompact weaving system creates a breathable, lightweight fabric that contains a high percentage of anti-static fibers.
Pre-Curved Driving Position
Pre-curved arms and legs allow the suit to follow the driver’s natural seated position. This reduces material bunching around the elbows, knees, and hips while helping improve mobility during steering, shifting, and pedal operation.
Inner-Thigh Stretch Panel
A strategically positioned stretch panel along the inner thigh provides greater flexibility and comfort. The stretch construction allows the legs to move naturally and helps reduce pressure during long periods behind the wheel.
Lightweight Zipper and Collar
An ultra-slim zipper and reduced-profile collar help minimize unnecessary weight and bulk. The streamlined construction sits comfortably beneath a helmet and head-and-neck restraint system while maintaining a professional race-ready fit.
Seamless Wrist and Ankle Cuffs
Soft Nomex and viscose cuffs provide a close, comfortable fit around the wrists and ankles. Their seamless construction helps reduce pressure points and irritation during extended driving sessions.
Flattened Stitching
Thinner thread and flattened seams are used throughout the suit to reduce weight and improve comfort. The low-profile stitching minimizes bulky areas that can create pressure between the driver, seat, belts, and cockpit.
Sparco Prime Driver Racing Suit Features
Developed for the McLaren Formula One team
Ultralight professional racing suit construction
FIA 8856-2018 approved
SFI 3.2A/5 approved
Advanced three-layer construction
Exclusive DuPont Nomex fibers
Double-faced Nomex Comfort mesh outer layer
Sparco Kompact weaving technology
High percentage of anti-static fibers
Excellent breathability and heat management
Pre-curved arms and legs
Inner-thigh stretch panel
Ultra-slim lightweight zipper
Reduced-profile collar
Reduced neck and shoulder padding
Soft seamless wrist and ankle cuffs
Thin thread with flattened stitching
Designed for increased comfort during long racing stints
Technical Specifications
Product: Sparco Prime Driver Racing Suit
Manufacturer: Sparco
Construction: Three layer
Primary Material: DuPont Nomex
Outer Layer: Double-faced Nomex Comfort mesh
Fabric Technology: Sparco Kompact weaving system
Stretch Panel: Inner thigh
Fit: Pre-curved arms and legs
Closure: Ultra-slim lightweight zipper
Cuffs: Seamless Nomex and viscose
Certification: FIA 8856-2018 and SFI 3.2A/5
European Sizes: 48–66
Colorways: Three available combinations
Sparco Prime Driver Racing Suit Sizing Chart
Frequently Asked Questions
Is the Sparco Prime Driver Racing Suit FIA approved?
Yes. The Sparco Prime is approved to the FIA 8856-2018 standard for use in many international and professional auto racing competitions.
Is the Sparco Prime racing suit SFI approved?
Yes. The Prime is also approved to the SFI 3.2A/5 standard. Drivers should confirm the current suit requirements for their racing organization, class, and event.
How many layers does the Sparco Prime suit have?
The Sparco Prime uses an advanced three-layer construction designed to provide fire protection while minimizing weight and improving breathability.
What is the Sparco Prime racing suit made from?
The suit is constructed with premium DuPont Nomex fibers. Its outer layer uses a double-faced Nomex Comfort mesh woven with Sparco’s Kompact system.
Does the Sparco Prime provide good mobility?
Yes. Pre-curved arms and legs place the suit in a natural driving position, while the inner-thigh stretch panel allows greater movement inside the cockpit.
Is the Sparco Prime suitable for endurance racing?
Yes. Its lightweight materials, breathable construction, anti-static fibers, and stretch panel make it well suited to endurance racing and other events involving extended periods behind the wheel.
What makes the Sparco Prime lighter than a standard racing suit?
The Prime uses optimized materials, an ultra-slim zipper, reduced neck and shoulder padding, seamless cuffs, thinner thread, and flattened stitching to eliminate unnecessary weight and bulk.
What sizes are available?
The Sparco Prime Driver Racing Suit is available in European sizes 48 through 66.
How should a racing suit fit?
A racing suit should fit comfortably in the seated driving position without pulling tightly across the shoulders, torso, or legs. There should be enough room for fire-resistant underwear while avoiding excessive loose material.
How should the Sparco Prime racing suit be cleaned?
Follow the care instructions printed on the suit’s internal label. Close the zipper and hook-and-loop sections before washing, use approved mild cleaning products, and avoid bleach, fabric softener, or excessive heat that could damage the fire-resistant materials.
Professional-Level Protection with Minimal Weight
The Sparco Prime Driver Racing Suit combines premium Nomex materials, lightweight components, breathable fabric technology, and an ergonomic driving fit. Its three-layer construction, pre-curved limbs, inner-thigh stretch panel, and dual FIA and SFI approval make it an excellent choice for professional drivers and serious club racers.
Sparco S.p.A.
Sparco Pro Master Racing Seat | FIA 8855-2021
from $2,200.00
Sparco Master Racing Seat
FIA 8855-2021 Approved
This seat is available by special order only (8-10 weeks lead time). As such, all purchases are final and non-refundable.
Experience the Pinnacle of Racing Comfort and Safety with the Sparco Master 8855-2021 Racing Seat. Now you can enjoy your new race seat for up to 10 years.1
Are you ready to take your racing experience to new heights of safety and comfort? Look no further than the Sparco Master 8855-2021 Racing Seat. Meticulously crafted to deliver unparalleled comfort and safety, this seat is a game-changer for any racing enthusiast or professional driver.
Designed to meet the latest, most stringent FIA 8855-2021 safety standards, the Sparco Master Racing Seat offers top-of-the-line protection on the track. Safety is our utmost priority, and with the Sparco Master 8855-2021 Racing Seat, you can confidently push the limits, knowing you're protected by industry-leading safety measures.
But safety is just the beginning. The Sparco Master Racing Seat goes above and beyond to provide unmatched comfort during those long racing sessions. Its ergonomic design contours to your body shape, offering optimal support and reducing driver fatigue. The seat's plush padding, wrapped in luxurious and breathable fabric, enhances your overall comfort, allowing you to stay focused and perform at your best throughout the race.
Versatility is key, and the Sparco Master Racing Seat delivers in spades. With integrated side and backrest bolsters that can be easily adjusted, this seat allows you to find the perfect fit, ensuring optimal stability and control. Every movement becomes precise and effortless, empowering you to navigate those tight turns with unmatched confidence.
Aesthetically pleasing and built to impress, the Sparco Master 8855-2021 Racing Seat boasts a sleek and dynamic design that will elevate the interior of any race car. From its attention-grabbing accents to its impeccable stitching, this seat is a visual statement that perfectly balances style and function.
Invest in the Sparco Master 8855-2021 Racing Seat, and experience the epitome of performance, comfort, and safety. Its 10-year 8855-2021 certification is a testament to its outstanding quality and longevity, ensuring it will serve as a reliable companion for your racing endeavors for years to come.
Don't compromise when it comes to your racing experience. Choose the Sparco Master 8855-2021 Racing Seat and unlock a new level of comfort, performance, and safety on the track. Get ready to dominate the competition and make your mark in the world of motorsport.
1 Note: this seat requires Sparco Side Mount 004919 in order to qualify for the ten-year FIA certification.
What is FIA 8855-2021 Certification?
The FIA 8855-2021 certification is the latest racing seat safety standard established by the Fédération Internationale de l'Automobile (FIA), the governing body for motorsport. It specifically pertains to racing seats and sets forth a set of stringent criteria that must be met to ensure the highest level of safety for drivers.The certification encompasses a range of requirements related to the design, construction, and performance of racing seats.
8855-2021 Requirements Include:
Impact Resistance: Racing seats must be able to withstand high-impact forces and provide effective protection to the driver in the event of a crash. They undergo rigorous testing to ensure they can withstand these forces without compromising driver safety.
Load-Bearing Capacity: Racing seats are subjected to tests to determine their load-bearing capacity. This ensures that they can support the weight of the driver and maintain their structural integrity under intense racing conditions.Flame Resistance: Racing seats must be constructed from materials that are resistant to fire. This is crucial in motorsport, as a fire incident can occur in the event of a crash. The FIA 8855-2021 certification requires seats to meet specific flame resistance standards to enhance driver safety.
Durability: Racing seats undergo tests to evaluate their durability over an extended period of time. This ensures that they can withstand the demands of racing, including vibrations, impacts, and repeated use, without compromising their structural integrity.
The Highest Safety Standard on Earth
It's important for racers to choose seats that are certified under the FIA 8855-2021 standard, as it ensures they are investing in a product that meets the highest safety standards set by the governing body of motorsport. By selecting FIA-certified seats, drivers can have confidence in the safety and performance of their racing equipment, allowing them to focus on pushing their limits on the track.
The ten-year 8855-2021 certification is a remarkable achievement that sets the Sparco Master Racing Seat apart from its competitors. This certification signifies that the seat meets the rigorous safety standards established by the Fédération Internationale de l'Automobile (FIA), the governing body for motorsport safety.
The FIA 8855-2021 standard is specifically designed to ensure the highest level of safety for racing seats. It encompasses a comprehensive set of criteria that must be met, including impact resistance, load-bearing capacity, flame resistance, and durability. Undergoing rigorous testing and evaluation, the Sparco Master Racing Seat has proven its ability to withstand extreme conditions and provide optimal protection to the driver.
The ten-year certification is a testament to the seat's exceptional build quality and longevity. It means that the Sparco Master Racing Seat is built to last, with materials and construction techniques that are designed to withstand the demands of competitive racing over an extended period of time. This certification provides peace of mind to racers, knowing that their investment in the Sparco Master Racing Seat will serve them well for many years to come.
Moreover, the 10-year certification demonstrates Sparco's commitment to excellence and their dedication to ensuring the highest level of safety in motorsports. Sparco, renowned for their expertise in producing high-performance racing equipment, has consistently pushed the boundaries of innovation to deliver products that meet and exceed industry standards.
Choosing a racing seat with a ten-year 8855-2021 certification means you're making a wise investment in your safety and long-term racing endeavors. It's a clear indication that the Sparco Master Racing Seat has undergone rigorous testing, proven its exceptional quality, and is recognized by the FIA as a product that meets the highest safety standards.
Dimensions
Sparco S.p.A.
Sparco ADV XT Racing Seat | FIA 8855-2021
from $2,100.00
Sparco ADV XT Racing Seat
FIA 8855-2021 Certified
SPECIAL ORDER (8-10 WEEKS) - Non-Refundable
Elevate Your Racing Performance with the Sparco ADV XT 8855-2021 Racing Seat. Now you can enjoy your new race seat for up to 10 years.1
Elevate Your Racing Performance
Introducing the Sparco ADV XT 8855-2021 Racing Seat, the pinnacle of racing comfort and safety. Designed to meet the rigorous standards of the FIA 8855-2021 certification, this seat combines cutting-edge technology with exceptional craftsmanship to deliver an unparalleled racing experience.
Safety is paramount in motorsport, and the Sparco ADV XT Racing Seat is engineered to provide uncompromising protection. Constructed with a sturdy tubular frame and utilizing high-quality materials, this seat ensures exceptional durability and resilience. It has been rigorously tested to meet the stringent FIA 8855-2021 safety standards, providing you with the confidence to push your limits on the track.
But the Sparco ADV XT Racing Seat doesn't stop at safety. It also delivers exceptional comfort, keeping you focused and comfortable during those intense racing sessions. The ergonomic design conforms to your body, providing optimal support and reducing driver fatigue. With its plush padding and premium upholstery, this seat enhances your overall comfort, enabling you to maintain peak performance throughout every race.
Visually Striking Precision and Control
Experience precision control like never before with the Sparco ADV XT Racing Seat. Its advanced design features integrated side and backrest bolsters that can be easily adjusted to your preferences. This customizable fit ensures optimal stability, allowing you to make precise maneuvers with ease, giving you the competitive edge you need to outperform your rivals.
Visually striking and flawlessly crafted, the Sparco ADV XT 8855-2021 Racing Seat is a true embodiment of style and functionality. Its sleek and aerodynamic design, complemented by intricate stitching and attention to detail, will make a statement in any race car interior.
When it comes to performance, safety, and comfort, the Sparco ADV XT 8855-2021 Racing Seat exceeds expectations. Its ten-year FIA 8855-2021 certification1 highlights its exceptional quality and long-lasting durability, ensuring it will be your trusted companion for countless racing adventures.
Take your racing experience to the next level with the Sparco ADV XT 8855-2021 Racing Seat. Unlock unparalleled safety, comfort, and performance on the track. Don't settle for anything less than the best—choose Sparco and dominate the competition.
1 Note: this seat requires Sparco Side Mounts 004932 in order to qualify for the ten-year FIA certification. You can select the side mounts above when ordering.
What is FIA 8855-2021 Certification?
The FIA 8855-2021 certification is the latest racing seat safety standard established by the Fédération Internationale de l'Automobile (FIA), the governing body for motorsport. It specifically pertains to racing seats and sets forth a set of stringent criteria that must be met to ensure the highest level of safety for drivers.The certification encompasses a range of requirements related to the design, construction, and performance of racing seats.
These requirements include:
Impact Resistance: Racing seats must be able to withstand high-impact forces and provide effective protection to the driver in the event of a crash. They undergo rigorous testing to ensure they can withstand these forces without compromising driver safety.
Load-Bearing Capacity: Racing seats are subjected to tests to determine their load-bearing capacity. This ensures that they can support the weight of the driver and maintain their structural integrity under intense racing conditions.Flame Resistance: Racing seats must be constructed from materials that are resistant to fire. This is crucial in motorsport, as a fire incident can occur in the event of a crash. The FIA 8855-2021 certification requires seats to meet specific flame resistance standards to enhance driver safety.
Durability: Racing seats undergo tests to evaluate their durability over an extended period of time. This ensures that they can withstand the demands of racing, including vibrations, impacts, and repeated use, without compromising their structural integrity.
It is important for racers to choose seats that are certified under the FIA 8855-2021 standard, as it ensures they are investing in a product that meets the highest safety standards set by the governing body of motorsport. By selecting FIA-certified seats, drivers can have confidence in the safety and performance of their racing equipment, allowing them to focus on pushing their limits on the track. The ten-year 8855-2021 certification is a remarkable achievement that sets the Sparco ADV XT Racing Seat apart from its competitors. This certification signifies that the seat meets the rigorous safety standards established by the Fédération Internationale de l'Automobile (FIA), the governing body for motorsport safety.
The FIA 8855-2021 standard is specifically designed to ensure the highest level of safety for racing seats. It encompasses a comprehensive set of criteria that must be met, including impact resistance, load-bearing capacity, flame resistance, and durability. Undergoing rigorous testing and evaluation, the Sparco ADV XT Racing Seat has proven its ability to withstand extreme conditions and provide optimal protection to the driver.
The ten-year certification is a testament to the seat's exceptional build quality and longevity. It means that the Sparco ADV XT Racing Seat is built to last, with materials and construction techniques that are designed to withstand the demands of competitive racing over an extended period of time. This certification provides peace of mind to racers, knowing that their investment in the Sparco ADV XT Racing Seat will serve them well for many years to come.
Moreover, the ten-year certification demonstrates Sparco's commitment to excellence and their dedication to ensuring the highest level of safety in motorsports. Sparco, renowned for their expertise in producing high-performance racing equipment, has consistently pushed the boundaries of innovation to deliver products that meet and exceed industry standards.
Choosing a racing seat with a ten-year 8855-2021 certification1 means you're making a wise investment in your safety and long-term racing endeavors. It's a clear indication that the Sparco ADV XT Racing Seat has undergone rigorous testing, proven its exceptional quality, and is recognized by the FIA as a product that meets the highest safety standards.
SPARCO ADV XT RACING SEAT DIMENSIONS
Sparco S.p.A.
Sparco Circuit / Circuit II Carbon Fiber Racing Seat
$2,049.00
Sparco Circuit / Circuit II Carbon Fiber Racing Seat
The Sparco Circuit Carbon is the pre-preg (dry) carbon version of the Circuit QRT, designed with integrated head protection for added safety. Lightweight construction, high-grip fabrics, and supportive ergonomics keep drivers stable and comfortable in compact cockpits. Compatible with HANS/FHR devices and FIA 8855-1999 approved.
Key Features
Pre-preg (dry) carbon fiber shell for ultralight strength
Integrated head bolsters with energy-absorbing surround
High-grip, fire-retardant fabric in key contact areas
Slim profile for small-cockpit fitment
Supports HANS/FHR device use
FIA 8855-1999 approved
Sizing
Circuit (Standard): Small/Narrow – fits up to a 32" waist
Circuit II (Large): Medium – fits up to a 36" waist
Sparco S.p.A.
Sparco Martini Legend Kevlar Racing Seat
$1,950.00
Sparco Martini Legend Kevlar Racing Seat
Rev up your racing experience with the Sparco Martini Legend Kevlar race seat, a meticulously crafted seat with a winning combination of Kevlar and carbon fiber. Engineered for unparalleled performance, safety and style, this race seat is the pinnacle of motorsport excellence. With its exceptional construction and iconic design, it's no wonder this seat is at the top of every racing enthusiast's wishlist.
Sparco: An Unrivaled Performance Heritage
The Sparco Martini Legend Kevlar race seat boasts an innovative construction that combines lightweight Kevlar and dry carbon fiber. This fusion provides outstanding strength, rigidity, and durability while maximizing safety. The seat's ergonomic design ensures maximum comfort during intense races, allowing you to maintain full control of your vehicle at high speeds.
Martini Legend Kevlar Seat Safety
Safety is of utmost importance in motorsports, and the Sparco Martini Legend Kevlar race seat excels in this aspect. It meets the stringent FIA 8855-1999 safety standard, guaranteeing optimal protection in an impact. The seat features integrated head and shoulder protection, bolstered side supports, and deep thigh cushions to minimize the risk of injury. With this seat, you can race with confidence, knowing that your well-being is prioritized.
Iconic Martini Racing Style
Stand out on the track with the legendary Martini Racing design adorning the Sparco Martini Legend Kevlar race seat. The iconic Martini Racing colors are proudly displayed on this seat, instantly recognizable by racing enthusiasts worldwide. This timeless aesthetic, combined with the impeccable craftsmanship of Sparco, creates a seat that not only performs but also captivates attention.
Join the elite ranks of motorsport legends and elevate your racing to new heights with the Sparco Martini Legend Kevlar race seat. Immerse yourself in the race with its Kevlar and carbon fiber construction, delivering unrivaled performance, safety, and iconic style. Don't settle for anything less than the best – equip yourself with a seat that embodies the essence of motorsport excellence.
Purchase yours today and experience the thrill of true racing mastery.
Sparco Legend Kevlar Race Seat Size
Medium / Large (up to 36” waist)
Sparco Martini Legend Kevlar Seat Details
Ultra lightweight dry carbon/Kevlar shell
Bottom mount only
Excellent ergonomics
FIA 8855-1999 approved
Sparco S.p.A.
Sparco ULTRA Carbon Racing Seat
$1,849.00
Sparco ULTRA Carbon Racing Seat
The Sparco ULTRA Carbon competition seat is the lightest FIA 8855-1999 approved seat in the Sparco range, weighing in at a featherweight 8.3 lbs. (3.8kg)! The ULTRA Carbon racing seat is constructed with high-strength pre-preg aerospace grade carbon fiber (also known as dry carbon), giving it an optimal strength-to-weight ratio.
The Sparco ULTRA Carbon seat is a revolutionary design that is installed and used without a fabric cover or padding, minimizing weight and maximizing performance. This also allows for a lower seating position and more direct feedback from the chassis of your race car. The Sparco ULTRA Carbon shell is the epitome of form following function. The lightweight monocoque design gives it an extremely comfortable shape that's contoured for a seated driver with the perfect amount of recline and lumbar support.
The Sparco ULTRA Carbon competition seat was designed to fit into very narrow cockpits wile still offering sizing that fits a standard- or larger-build driver. The Sparco ULTRA Carbon is FIA 8855-1999 approved.
The Sparco ULTRA Carbon seat requires Sparco Aluminum Side Mounts 600W or 600W90 due to the shape of the seat. These mounts will allow the seat to be mounted in the lowest position.
Sparco ULTRA Carbon Fiber Race Seat Details
Manufacturer: Sparco
Manufacturer part no.: 008037ZNR
Sizing: Medium/Large (up to 36” waist)
Weight: 8.3 lbs. (3.8 kg)
Homologation: FIA 8855-1999 approved
Seat Shell: ultra-lightweight pre-preg carbon fiber
Upholstery: none
Excellent fitment into small narrow vehicle cockpits
Supremely comfortable ergonomics and lower seating position
Racing Seat Dimensions
Sparco S.p.A.
Sparco EVO Carbon Fiber Racing Seat | Standard, Large or XL
$1,849.00
Sparco EVO Carbon Fiber Racing Seats
As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track!
The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover). The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved.
Sparco EVO Racing Seat Sizes
The Sparco EVO series is among the most versatile competition seats we carry, available in the following three sizes to ensure proper fitment:
EVO – Medium (up to 34” waist)
EVO L – Large (up to 36” waist)
EVO XL – X-Large (38” waist)
Sparco EVO QRT Racing Seat Features
Ultralight Pre-Preg Carbon Fiber shell
Excellent fitment into small vehicle cockpits
Three sizes: Standard (medium), Large and XL
Excellent ergonomics
Fire retardant fabric
Special non-slip fabric
FIA 8859-1999 approved
EVO Carbon Fiber Racing Seat Dimensions
Dimensions
EVO Standard Dimensions:
EVO L / XL Dimensions:
Sparco S.p.A.
Sparco Evolve GP Sim Cockpit with Sparco GP Sim Seat
from $1,799.00
Sparco Evolve GP Sim Cockpit
Drive Like a Pro, Feel Like a Champion!
Includes Sparco GP Gaming Seat
Ready to take your sim racing experience to the next level? Enter the Sparco Evolve GP Sim Cockpit, a purpose-built formula-style sim racing rig that gets you into the perfect low-slung, high-speed driving position. Whether you're gunning for the pole position or just shaving milliseconds off your lap time, this cockpit is built for serious racers who want the feel of a real formula car—without ever leaving their living room.
Designed to mimic the seating position of a real formula race car, the Evolve GP allows you to sit low and angled, just like the pros. And comfort? Oh, it’s there in spades. The Evolve GP features a specially designed racing seat with customizable padding, so you can tweak your setup until it feels just right—perfect for those marathon sim racing sessions.
Key Features That Make You Faster (and More Comfortable)
Formula-style sim cockpit – You’ll feel like you’re sitting in the cockpit of a real F1 car. All you need is the helmet!
Sparco GP Gaming Seat is included.
Customizable seat padding – Because every racer’s body is different, and you deserve comfort tailored to you.
Integrated monitor stand with VESA mount – Keep your screen right in your line of sight for immersive racing action. No neck craning here.
Adjustable steering wheel and pedal platform – Perfect for direct drive wheels and high-pressure pedals, so your rig is ready for any high-performance gear you throw at it.
Adjustable leveling feet – Ensures your cockpit is stable, level, and ready for action, no matter where you set up.
Why the Sparco Evolve GP Is Built for Winners
The Evolve GP isn’t just about looking good—it’s about racing better. The cockpit’s low, formula-style seating position gives you that authentic racing feel, and with an adjustable wheel and pedal platform, your controls are always right where you need them. Whether you're rocking a direct-drive wheel or high-end pedals, this cockpit is built to handle it all.
Plus, the integrated monitor stand with VESA mount keeps your display perfectly positioned, so you can stay laser-focused on the road ahead. And with adjustable leveling feet, you’ll always have a rock-solid setup, no matter how intense the race gets.
Sparco Evolve GP Sizing and Compatibility
VESA mount for screens – Compatible with most sim racing monitors.
Adjustable for any setup – Whether you're a seasoned pro or a weekend warrior, the Evolve GP adapts to your needs.
Sparco Evolve GP FAQs
Is this cockpit compatible with all racing wheels and pedals? Absolutely! The Sparco Evolve GP is designed to handle direct-drive wheels and high-pressure pedals, ensuring stability and precision for your setup.
Can I adjust the seat and wheel position? Yes! Both the steering wheel platform and the pedal platform are fully adjustable, allowing you to fine-tune the setup to match your preferred driving style.
Is the cockpit sturdy? With its steel tubular frame and adjustable leveling feet, the Evolve GP is built for stability. No wobbles, no worries—just solid racing performance every time.
Race to Win with the Sparco Evolve GP Sim Cockpit!
Don’t just race—evolve your sim racing setup with the Sparco Evolve GP. Formula-style comfort, customizable features, and pro-level stability make this cockpit the perfect upgrade for serious sim racers.
Hit 'Add to Cart' now, and start racing like the pros!
