Brey Krause
Brey Krause R-9044 Seat Adapter w Sub Mount Porsche 996-997-986-987
$282.57
Brey Krause Side-Mount Adapter & Sub Strap Bar
The Brey Krause R-9044 Side-Mount Adapter with Integrated Sub-Strap Bar makes installing racing seats in your Porsche straightforward and painless. Designed for the Porsche 996, 997, Boxster or Cayman, the R-9044 does away with your OEM seat sliders, mounting the seat as low as possible in the car and removing excess weight. An integrated sub-strap bar is adjustable for proper 5 or 6-point sub-strap routings.
Three front-to-rear fixed mounting points allow your Brey-Krause Side-Mount Adapters (not included) to be installed in several fore-aft positions. Best of all, the entire assembly can be quickly installed before a track event and just as easily removed when you're back home. Voila! The daily driving comfort of your stock seats plus the bolstering and safety of a racing seat when you're at the track.
Brey Krause seat side-mount brackets can be added separately in the dropdown above, creating a ready-to-bolt-in racing seat system!
Brey Krause R-9044 Seat Adapter Details
Manufacturer: Brey Krause
Manufacturer part no.: R-9044
Fitment: Porsche 911 Carrera (996/997), Boxster & Cayman (986/987)
Material: Type 304 Stainless Steel
Weight: 4 lbs.
Finish: Satin
Seat side mounts not included
Brey Krause
Brey Krause C6-C7 Corvette Extra Low Seat Mount + Sub-Bar
$261.95
C6/C7 Corvette Extra-Low Seat Mount incl. Sub-Bar
The Brey-Krause R-9153 driver-side seat mount offers a solution to the low roof-line of the C6 and C7 Chevrolet Corvettes. This racing seat adapter places the seat rails at a slant, allowing the seat to be lower in a rearward position when combined with a Recaro Slider (sold separately). This slant allows the seat to sit higher when in a forward position (perfect for shorter drivers), while offering increased head clearance when adjusted rearward for taller drivers.
The Brey-Krause R-9153 bolts directly to the floor of the Corvette, and combines with a Recaro slider to allow the installation of many seat options when used with Brey-Krause side-mounts. Also compatible with the C6 Corvette if you are searching for additional head-room.
The mounting kit comes complete with an adjustable integrated Sub-Bar for correct mounting of your 5 or 6 point harness system. The design also allows for the reuse of stock 3-point belts, with inboard/outboard lap belt mounting locations built in. Note: Brey-Krause R-906X series side mount brackets must be purchased separately.
NOTE: Although this kit allows for the installation of many brands and models of racing seat, due to the extremely low roof-line and the tight confines of the C7 Corvette, many larger racing seats will not fit. Please contact one of our racing seat experts (844) 438-7244 with questions related to your particular installation.
Brey-Krause C6-C7 Extra Low Seat Mount Details
Manufacturer: Brey-Krause
Manufacturer part no.:Â R-9153
Materials (seat mount): Aircraft-grade aluminum
Materials (sub bar): Type 304 stainless steel
Finish: Black gloss powder coat
Weight: 7.8 lbs / 3.5 kg
Car Fitments: C6 and C7 Chevy Corvette coupes (2005 - 2019), including Z51 and Z06.
Hardware: all necessary hardware included
Brey Krause
Brey Krause R-9775 Cobra Nogaro Mount Porsche 996-997-986-987 Sliders
$249.36
Brey Krause R-9775 Cobra Nogaro Seat Mount for Porsche Seat Sliders
The Brey Krause R-9775 makes adapting the phenomenal Cobra Nogaro sport seats to your Porsche's OEM manual sliders (sliders not included)1. The R-9775 can also be used with the Brey Krause R-9044 Seat Adapter for a lower mounting height and even lighter weight.
The Cobra Nogaro is the perfect balance between a full-fledged racing seat (with pass-throughs for harness shoulder and anti-sub belts) and a seat comfortable enough for daily driving or weekend touring.
With threaded lap belt bosses on both sides, the R-9775 works on both the driver- and passenger-side. It makes adapting the Nogaro to your OEM Porsche non-powered sliders a breeze. The Schroth Profi II GT3 six-point harness bolts right up, as well as your OEM inboard seat belt receptacle. Add the BK-9030 sub-belt adapter (available in the dropdown above) and you really have the best of both worlds!
Brey Krause R-9775 Cobra Nogaro Mount Details
Manufacturer: Brey Krause
Manufacturer part no.: R-9775
Fitment (cars): all Porsche 996, 997, Boxster/Cayman models with manual seat sliders.
Fitment (seat): Cobra Nogaro Sport Seats.
Material: 11 gauge T-304 stainless steel.
Finish: powder coated black wrinkle-finish.
Weight: 4.0 lbs.
Porsche manual seat slider (pictured) not included
1 Note: Porsche OEM manual seat slider assembly (not included) from the 996/986 and some 997/987 models is required for installation. This product is not compatible with power seat sliders.
Brey Krause
Brey Krause R-9751 OMP HTE Seat Adapter Porsche 997-987-996-986
$248.10
Easily Install OMP HTE Seats In Your Porsche
The Brey Krause R-9751 Driver-side Racing Seat Side Mount Bracket (for passenger-side, see R-9752) allows for the easy installation of OMP HTE Racing Seats into Porsche 996, 997, Boxster, and Cayman models using the OEM factory non-power sliders. It can also be used with BK's R-9044 assembly.
Designed to keep the seat as low as possible, the four mounting positions provide a wide range of recline options. An inboard threaded seat belt mount is integrated into the adapter.
Brey Krause R-9751 OMP HTE Seat Adapter Details
Manufacturer: Brey Krause
Manufacturer part no.: R-9751
Fitment: all Porsche 996, 997, 986, 987 models with non-power seats.
Racing seat: fits OMP HTE Racing Seats.
Material: 11 gauge, Type 304, stainless steel.
Finish: powder coated black wrinkle-finish.
Weight: 4.0 lbs.
Note: Factory non-power (manual) slider assembly from the 996/986 (and some 997/987s) required for installation. Will not fit sliders with power option.
Recaro
Recaro Steel Side Mounts (Pole Position N.G.)
$245.00
Recaro Steel Side Mounts for the Pole Position N.G.
FIA Approved Racing Seat Side Mounts
These Recaro Steel Side Mount brackets for the Recaro Pole Position N.G. racing seat provide an FIA-approved mounting system for your Recaro seat. Strong, rigid, and made specifically for your Recaro, this simple side mount system is for drivers who demand the highest quality in their safety gear.
Recaro Steel Side Mount Details
Manufacturer: Recaro
Manufacturer part no.: 7223825
One pair of side mounts
Steel construction
FIA certified
For use with the Recaro Pole Position N.G. racing seat
Recaro
Recaro Steel Side Mounts (Podium) FIA or ABE
$245.00
Recaro Podium Steel Side MountsÂ
This Mount Set Fits the Following Seats:
Recaro Podium Medium
Recaro Podium Large
FIA Approved Racing Seat Flexibility
These Recaro Steel Side Mount brackets for the Recaro Podium seat fits both the medium and large size seats. Strong, rigid, and made specifically for your Recaro Podium seat, this simple side mount system is for drivers who demand the highest quality in their safety gear. Available in either ABE or FIA Certification
Sold in pairs.The Recaro Podium steel side mounts can be used with Recaro Podium seats.
Recaro Podium Steel Side Mount Details
Manufacturer: Recaro
Manufacturer part no.: 5219908 or 5219910
One pair of side mounts
Steel construction
Choose FIA or ABE Certification
For use with the Recaro Podium seats
Recaro
Recaro Pro Racer/Profi SPG & SPA 55mm Seat Cushion
$245.00
Recaro Pro Racer/Profi SPG & SPA Seat Cushion (Standard Size)
This 55mm Seat Cushion Fits the Following Seats:
Recaro Pro Racer SPA
Recaro Pro Racer SPG
Recaro Profi SPA
Recaro Profi SPG
Extra Height Seat Cushion for Customized Comfort
Recaro 55mm black velour front seat cushion for the Pro Racer and Profi SPA/SPG racing seats.
Recaro 55mm Seat Cushion Features:
One black velour cushion
55mm height
For use with the Recaro Profi SPA/SPG or Pro Racer SPA/SPG
Recaro
Recaro Steel Side Mounts (XL) 7207450ANA
$245.00
Recaro Pro Racer/Profi Steel Side Mounts (XL Size)
This Mount Set Fits the Following Seats:
Recaro Pro Racer SPA XL
Recaro Pro Racer SPG XL
Recaro Profi SPAÂ XL
Recaro Profi SPG Â XL
Recaro Pole Position
Recaro Pole Position ABE
FIA Approved Racing Seat Flexibility
These Recaro Steel Sidemount brackets for the P 1300 GT advanced racing shell provide an FIA-approved mounting system for your Recaro Pro Racer or Profi SPA/SPG XL, or Pole Position racing seat. Strong, rigid, and made specifically for your Recaro XL racing seat, this simple side mount system is for drivers who demand the highest quality in their safety gear.
These Recaro universal steel side mounts can be used with Recaro Pole Position, Pole Position ABE, Profi XL, Pro Racer SPA XL (FIA Certified) side mounted bucket seats or most other brands as well. Check out the standard-size version here.
Sold in pairs.
Recaro Steel Side Mounts Details:
Manufacturer: Recaro
Manufacturer part no.: 7207450ANA
One pair of side mounts
Steel construction
FIA certified
For use with the Recaro Profi SPA/SPG XL, Pro Racer SPA/SPG XL, or Pole Position
Recaro
Recaro Steel Side Mounts (Standard) 360942
$245.00
Recaro Pro Racer/Profi Steel Side Mounts (Standard Size)
This Mount Set Fits the Following Seats:
Recaro Pro Racer SPA
Recaro Pro Racer SPG
Recaro Profi SPA
Recaro Profi SPG
FIA Approved Racing Seat Flexibility
These Recaro steel side-mount brackets for the P 1300 GT advanced racing shell provide an FIA-approved mounting system for your Recaro Pro Racer or Profi SPA/SPG. Strong, rigid, and made specifically for your Recaro racing seat, this simple side mount system is for drivers who demand the highest quality in their safety gear.
This side mount system only works with the Recaro Pro Racer and Profi SPA/SPG standard-size seats. Check out the XL version here.
Sold in pairs.
Recaro Steel Side Mount Details:
Manufacturer: Recaro
Manufacturer part no.: 360942
Contents: one pair of side mounts
Material: steel
Homologation: FIA certified
For use with the Recaro Profi SPA/SPG and Pro Racer SPA/SPG racing seats
CMS Performance
CMS Performance Sub Strap Mount for Porsche Carbon Bucket Seat
from $195.00
CMS Performance Sub Strap Mount for Porsche Lightweight Carbon Bucket Seats
This Product Fits the Following Cars:
992 GT3/GT3RS
991.1 & 991.2 GT3/GT3RS
991.2 GT2RS
981 Cayman GT4
718 Cayman GT4
718 Cayman GT4RS
The Best Way to Install Sub Straps in your Porsche
The CMS Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Light Weight Bucket seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the CMS Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base.
The CMS Performance Sub Strap Mount fits the driver- and/or passenger-side seats.
Born In The USA
CMS Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid carbon steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. CMS Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety.
Custom Porsche Colors Available For Personalized Look
The standard powder coat color of the CMS Performance Sub Strap Mount is a silky-smooth satin black. If you want your sub strap mounts to show a bit of flair, we have color-matched several Porsche paint colors and can powder coat your sub strap mounts in any of those colors for an additional $95 per mount.
CMS Performance Sub Strap Mount Details
Solid steel construction for maximum safety
Allows full fore/aft and up/down seat adjustment
Powder-coated satin black standard; several Porsche colors available (custom colors are an additional $95 per mount)
Fits driver or passenger seat (Porsche Carbon LWB only)
Simple to install
Compatible with OEM seat belt and airbag hardware
Sparco
Sparco Seat Mounting Base: 600 Series
$185.00
Sparco 600 Series Seat Mounting Base
Fitment for a Wide Range of Cars and Trucks
Sparco 600 Series seat bases utilize the factory seat mounts on your car's or truck's floor to give you a strong, flat mounting surface for your Sparco racing seat. Sparco 600 Series seat bases are vehicle specific for an easy, bolt-in installation. The 600 Series Sparco racing seat base is constructed with 3/16" steel providing a strong, flex-free mount.
Sparco 600 Series racing seat mounting bases are powder coated in a black wrinkle finish for a clean look. In addition to the mounting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform for custom installation of side mounts directly to the base (drilling required). Direct installation is handy in race vehicles where the lowest seat position is desired.
Note: We carry Sparco 600 Series seat mounting bases for dozens of popular fitments in stock. For less-common fitments, it may take up to 10 business days for your mounting base to ship.
Photos are of various Sparco 600 Series Mounting Bases. Your seat mounting base may differ.
Sparco Seat Mounting 600 Series Base Details:
Manufacturer: Sparco
Manufacturer part no.: 600SB
Construction: 3/16" steel
Finish: wrinkle-finish black powder coating
Outer mounting holes for wide side-mount racing seats
Mounting surface allows direct installation of side mounts (some drilling may be required)
Proper Installation of Your Sparco Racing Seat Requires:
(1) Sparco 600 Series Seat Mounting Base
(1) Set of two side mount brackets (steel or aluminum)
(1) Side mounting hardware kit (50002)
Optional (1) Track Set Seat Slider (00493)1
1Â The Track Set Seat Slider allows for forward and aft seat adjustment. It is not SFI or FIA certified. Check with your sanctioning body before installing.
Sparco 600 Series Seat Mounting Base Part Numbers
Copy the SKU from the chart below and paste it into the "Input Part Number" field above when adding to cart.
Brey Krause
Brey Krause R-9052 Seat Side Mount Brackets Porsche 991 & 981
$182.47
Brey Krause R-9052 Porsche Race Seat Side Mounts
The Brey Krause R-9052 Seat Side Mount Adapters are designed to help install a multitude of side-mounting racing seats directly to the factory manual sliders1 used on many Porsche 991 and 981 cars. (Porsche OEM sliders are not included.) They also fit some later 997 & 987 Porsches equipped with similar tabbed sliders.
Porsche factory sliders are known for their quality and strength. Along with their longer travel versus aftermarket sliders, they help retain the factory feel in your car. Brey Krause's innovative design allows the side mounts to be installed in four different positions. Combined with included spacers, they are compatible with a multitude of racing seats that are between 390 and 430mm wide. Slightly slotted side-mounting holes allow for fitment to the most popular seat manufacturers (Sparco, Recaro, OMP, Cobra, and more).
The R-9052 is compatible with the Brey Krause R-9259 sub strap mount (available as an option) for use with a five- or six-point racing harness.
Brey Krause R-9052 Side Mount Bracket Details
Made from 11-gauge T304 stainless steel
Powder-coated in satin black
Weight 5 lbs (2.3 kg)
Fits all Porsche 991 & 981 cars with OEM manual seat sliders (also fits some late 997 & 987 cars with similar tabbed sliders)Â
Fits side-mount racing seats between 390-430mm wide
Maintains factory seat belt mount
Download installation instructions here
1 Porsche OEM manual seat sliders (not included) are required for seat installation. The R-9052 is not compatible with Porsche power seat sliders. Not compatible with race seat sliders.
Racetech
Racetech RTB2005C Seat Back Brace Clamps
$169.99
Racetech RTB2005C Seat Back Brace Clamps
Racetech RTB2005C aluminum clamps for back-mounting seats. Precision cut from a 20mm-thick 5083 aluminum alloy. Sold as a pair, these clamps fit around a roll cage or roll bar tube and bolt to the Racetech RTB2115B Seat Back Brace. This allows you to effectively back-mount any Racetech 119-Series racing seat to your roll bar or roll cage at shoulder level. Supplied with two M8 bolts and two flat washers.
Racetech RTB2005C Available Sizes:
1.50 inch (38.1mm) inside diameter
1.625 inch (41.3mm) inside diameter
1.75 inch (44.5mm) inside diameter
Racetech
Racetech RTB1009M Aluminum Side Mount Brackets
$169.99
Racetech RT1009MÂ Aluminum Side Mounts
Lightweight and Strong Racing Seat Side Brackets
Racetech mill-finish 5mm (5083 grade) aluminum brackets for side-mounting a racing seat. Five slots and five holes in each bracket provide plenty of height and tilt adjustment for the optimal driving position.
Sold as a pair.
Racetech RT1009MÂ Brackets Fit the Following Seats:
RT4009, RT4009W
RT4009HR, RT4009THR, RT4009WHR, RT4009WTHR
RT4100, RT4100WT, RT4100HR, RT4100WTHR
RT4119HRW, RT4119THR, RT4119WHR, RT4119WTHR
RT4129HRW, RT4129WHR, RT4129WTHR
RT9009, RT9009HR
RT9119HR, RT9119THR, RT9119WTHR
RT9129HRW, RT9129THR, RT9129WHR, RT9129WTHRL
Racetech RT1009MÂ Specs and Details:
Weight: 2.74 lbs (1.24 kg) per pair
Materials:Â 5mm 5083 aluminum alloy
Seat hole spacing: nominal 295mm; min 290mm; max 300mm
Sparco
Sparco Side Mount Brackets: HD Aluminum (004903)
$169.00
Sparco HD Aluminum Side Mount Seat Brackets
Far and away our most popular side mount seat bracket, the Sparco HD Aluminum seat mounts have multiple side holes making it easy to customize your seating position.
The Sparco HD Aluminum side mounts have the added benefit of being able to mount with the legs facing either in or out, giving you more vehicle mounting options. These heavy duty side mounts are larger than the standard Sparco aluminum side mounts. All aluminum construction makes them lightweight, with an anodized silver finish for durability.
Sparco HD Aluminum Side Mount Details
Manufacturer: Sparco
Manufacturer part no.: 004903
Material: aluminum
Finish: anodized silver
Weight: 3.4 lbs (1.5 kg) per set
Multiple mounting positions
Reverse mount option
Brey Krause
Brey Krause R-9041 Sparco Slider Adapter Porsche 997-987-991-981
$165.41
Easily Install Sparco Racing Sliders In Your Porsche
The Brey Krause R-9041 Seat Track Adapter Kit allows the installation of Sparco Seat Sliders to the floor of Porsche 911, Boxster, and Cayman models. This in turn allows the ability to adapt various Brey Krause R-906x Seat Side-Mount Brackets (sold separately) to the floor of your compatible Porsche.
Brey Krause R-9041 Sparco Slider Adapter Details
Manufacturer: Brey Krause
Manufacturer part no.: R-9041
Construction: TIG welded from 7 ga. T304 stainless steel
Adapts Sparco 00493 or Cobra sliders to Porsche 991/981/997/996/987/986
Satin-finish stainless steel
Weight: 2 lbs. 6 oz.