OMP Racing
OMP RT Racing Seat (2030 Expiry)
from $947.66
$1,199.00
OMP RT Racing Seat (2030 Expiry)
The OMP RT is a fixed-back, FIA-approved seat that blends track capability with street-friendly ergonomics. Its shell offers race-seat rigidity with lowered sides for easier entry/exit, supportive bolsters for control, and upholstery options that balance durability and comfort.
OMP RT Racing Seat Key Features
FIA 8855-1999 homologated
HANS compatible; integrated shoulder harness guides
Shell material options: fiberglass (approx. 22 lb) or carbon fiber
Alcantara/leather trim with removable padded inserts
Lowered side profile for easier cockpit access
Side-mount configuration; 290 mm bolt-hole spacing
OMP RT Racing Seat Specs
Recommended waist range: 29"–36"
Harness compatibility: 4-, 5-, or 6-point
Mounting bolt torque: 22 ft-lbs (30 Nm)
Head restraints: none
Fitment & Safety Note
As a fixed-back seat intended for performance use, install only with appropriate safety equipment (e.g., roll bar/half-cage/full cage) and use approved mounts/hardware.
Sabelt S.p.A.
Sabelt GT-Pad Racing Seat (2030 Expiry)
$943.66
$1,179.00
Sabelt GT-Pad Racing Seat 2030 Expiry
The Sabelt GT-Pad racing seat is Sabelt’s first modular seat, offering drivers the most customization available outside of a custom-built racing seat. The lightweight shell is covered with a velour fabric that is highly resistant to wear, looks great and is extremely comfortable even for extended stints when endurance racing.
Additional seat pad kits (Medium, Large, and XL) are available in either red or black, making it possible to customize the seat to both your fitment needs and your design taste by utilizing different colored and/or sized pads. The Sabelt GT-Pad is a truly ground-breaking seat design bringing everyone the fit, finish, and comfort previously available only with custom-made racing seats.
Sabelt GT-PAD Racing Seat Features
2030 Expiry
FIA 8855-1999 homologation
Medium weighs 23.5 lbs.
Large weighs 23.3 lbs.
XL weighs 23.1 lbs.
Developed using Sabelt's experience participating in the world’s leading racing series.
Integrated head protection system.
Shoulders and hips designed according to the requirements of Regulation 8862 to improve driver safety.
Rear structural reinforcement.
Ergonomic foam sections developed through CAD simulations and tested by professional drivers to improve driving comfort.
Kinderpoint anti-slip fabric on shoulder bolsters.
Air Ducting System uses space between pads to improve air circulation and breathability.
Sabelt S.p.A.
Sabelt GT3 Racing Seat
$929.95
Sabelt GT3 Racing Seat
The new Sabelt GT3 Racing Seat was re-designed with light weight and driver comfort in mind. The GT3 shell weighs 15% less than the previous model thanks to the innovative use of lightweight lamination. Additionally, the new removable leg cushion has been developed to increase driver comfort. Low side bolsters make entry and exit easy while still keeping the driver firmly (and safely) in place.
Anything but a basic racing seat, the Sabelt GT3's plush, high-wear velour upholstery, brilliant gel-coat shell, and use of high-density foam throughout add up to a very comfortable, great-looking seat without breaking the bank.
Sabelt GT3 Racing Seat Features
FIA 8855-1999 homologation
Weight: 21.6 lbs (9.8 kg)
Side bolstering to prevent lateral movement
Six-point harnesses ready thanks to sub-belt holes in the bottom of the shell
Highly wear-resistant velour fabric
Removable leg cushion
Sparco S.p.A.
Sparco QRT-R Racing Seat
$929.00
Sparco QRT-R Racing Seat
Ultra-lightweight QRT Technology At Its Best!
The QRT-R is the first seat to feature Sparco’s patented QRT ultra-light technology. This QRT Technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT Technology gives weight savings of 7 lbs to 10 lbs per shell. The main benefit is that QRT-R seat approaches the weight of a carbon fiber seat at a price of a fiberglass seat.
The QRT-R is the lightest "Medium/Large" size fiberglass seat, the shell alone weighs only 9.9 lbs (or 15 lbs fully trimmed). The QRT-R has a unique CAD design that features a lower seating position that can fit a larger/taller driver with the exterior dimensions that can fit into smaller vehicles. The QRT-R is FIA 8855-1999 approved. Available in cloth.
Requires the #600QRT side mount for proper mounting.
Sparco QRT-R Racing Seat Key Features
Lightest "Medium/Large" size fiberglass seat on the market
Lower seating position that can fit taller/larger drivers
Smaller outer dimensions for small vehicle fitment
QRT Technology gives an average weight savings of 7lbs per shell
FIA 8855-1999 approved
Dimensions
Sparco S.p.A.
Sparco Grid Q Racing Seat
$929.00
Sparco Grid Q Racing Seat
The Sparco Grid Q is engineered for superior lateral support, driver ergonomics, and safety. Its modular padding system uses individual Velcro-attached pads to fine-tune fit and create natural ventilation channels across the seating surface. A new shell design adds deep side bolsters and supportive shoulders for excellent hold under high-G loads.
Built with Sparco’s QRT (Quick Resin Technology), the Grid Q achieves an ultra-light fiberglass composite shell while maintaining outstanding strength. Side cushions can be removed for additional hip room, and the harness slots accommodate a wide range of driver sizes. The Grid Q is FIA approved and HANS compatible.
Sparco QRT Technology
QRT delivers an exceptional strength-to-weight ratio, reducing shell weight by up to 30% versus traditional fiberglass methods—approaching carbon fiber performance at a more accessible price point.
Features
QRT ultralight fiberglass composite shell
Deep side and shoulder bolsters for lateral support
Modular Velcro padding with ventilation channels
Removable side cushion for wider fit
Harness slots fit a broad range of drivers
HANS device compatible
Fire-retardant, self-extinguishing upholstery with non-slip zones
FIA 8855-1999 approved
Dimensions
Sparco S.p.A.
Sparco Pro 2000 QRT Racing Seat
$929.00
Sparco Pro 2000 QRT Racing Seat
QRT TECHNOLOGY LIGHTENS THE ICONIC SPARCO PRO 2000
The Pro 2000 QRT is an evolution of Sparco's iconic Pro 2000 seat. The Pro 2000 QRT has been upgraded with new ergonomics and technology. It is designed for a medium-sized driver with a waist size up to 34 inches. The Pro 2000 QRT is Sparco's deepest bolstered seat, giving the driver exceptional lateral support. It also features removable/adjustable lumbar cushions and non-slip fabric on the shoulder and bottom cushion areas for improved seat comfort.
The Pro 2000 QRT is made with all-new QRT Technology, resulting in an ultra-light yet incredibly strong outer shell. The shoulder harness openings have been raised and the seat area around the mid-section has been reshaped for less interference when compared to the original Pro 2000. The Sparco Pro 2000 QRT is FIA approved.
WHAT IS QRT?
Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies.
QRT creates an unparalleled mechanical strength-to-weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point.
SPARCO PRO 2000 QRT TECHNOLOGY
QRT ultra-light fiberglass composite shell
Excellent fitment into small cockpits
Adjustable lumbar cushions
Excellent ergonomics
Fire retardant fabric
FIA approved
SPARCO PRO 2000 QRT DIMENSIONS
Sparco S.p.A.
Sparco EVO QRT Racing Seat | Small, Med, Large or XL
$929.00
Sparco EVO QRT Racing Seats
As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo QRT. Starting with the shoulder bolsters, Sparco trimmed down the width to help them fit into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo QRT fits perfectly in a Miata!), the Sparco Evo QRT is sure be a mainstay at the track!
The Sparco EVO QRT series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. Available in cloth or vinyl. The Sparco EVO QRT is FIA approved.
Sparco EVO QRT Racing Seat Sizes
The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment:
EVO S – Small (up to 32” waist)
EVO – Medium (up to 34” waist)
EVO L – Large (up to 36” waist)
EVO XL – Extra Large (38” waist)
What Is Sparco QRT Technology?
Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point.
Sparco EVO QRT Racing Seat Features
QRT ultra-light fiberglass composite shell
Excellent fitment into small cockpits
Four Sizes: Small through XL
Excellent ergonomics
Fire retardant fabric
Special non-slip fabric
FIA 8855-1999 approved
Dimensions
EVO S Dimensions:
EVO Dimensions:
EVO L / XL Dimensions:
Sparco S.p.A.
Sparco Rev Racing Seat
$929.00
Sparco Rev Racing Seat
The Ideal Racing Seat for Smaller Cockpits
The Sparco Rev is a light-weight competition seat is that offers performance, safety and styling. Evolved from the Evo seat, the Rev is designed for the smaller driver. Constructed with a special non-slip fabric in the shoulder and cushion, the Rev features silver harness slots and signature Sparco embroidery. The Sparco Rev racing seat is FIA approved.
Sparco Rev Racing Seat Details
Specifically designed for the smaller driver
Ultra-light fiberglass composite shell
Re-proportioned seat design provides excellent ergonomics
Hans device compatible
Fire retardant fabric
Special non-slip fabric
FIA 8855-1999 approved
Dimensions
OMP Racing
OMP HTE-R 400 Racing Seat (2030 Expiry)
$927.66
$1,159.00
OMP HTE-R 400 Racing Seat - 2030 Expiry
The OMP HTE-R 400 racing seat gives you the same protective halo-style design as their standard HTE-R in a slimmer profile for installation in smaller cockpits. Constructed from a lightweight gel-coated fiberglass shell, the HTE-R 400 is upholstered in OMP's highly breathable Airtex material for comfort even in the hottest conditions.
Removable back/base cushions and a comfortable split-leg bottom cushion give you room to customize the fit. High side bolsters offer excellent lateral support, while the large HANS-compatible shoulder harness slots ensure proper alignment for a wide range of driver heights.
OMP HTE-R 400 Racing Seat Features
Manufacturer: OMP Racing
FIA 8855-1999 homologated
Gel-coated Fiberglass shell
Weight: 22.4 lbs. (10.2 kg)
Mounting: Side only
OMP Racing
OMP HTE-R Racing Seat | Regular or XL (2030 Expiry)
from $927.66
$1,159.00
OMP HTE-R Racing Seat - 2030 Expiry
The OMP HTE-R Racing Seat, which comes in size Regular or XL, is used in pro and amateur racing series all around the world because drivers prefer its protective, halo-style design and uncommonly comfortable construction. Based on a lightweight, gel-coated fiberglass shell, the Airtex material on the upholstered surfaces allows for exceptional breathability under high-temperature conditions.
OMP HTE-R seats have removable base- and back-cushions with an ergonomic, split-leg bottom cushion. They are designed to work comfortably with any HANS device and harnesses. High side-bolsters provide excellent lateral leg support and the seats are side-mount (W fixing) for supreme safety.
The OMP HTE-R XL version is 20mm wider, 20mm deeper (front to back), and 40mm taller than the Regular OMP HTE-R.
OMP HTE-R RACING SEAT FEATURES
FIA Homologation 8855-1999
SHELL: Fiberglass
MOUNTING: W (side)
HOLES: 5
WEIGHT: 9.4 to 10.5 kg (20.7 to 23.1 lbs.)
HANS compatible
OMP Racing
OMP ARS-R Racing Seat
$899.00
OMP ARS-R Racing Seat
Seat in gel-coated fiberglass shell. Large shoulder harness slots to accommodate various heights. Medium-height side bolsters for lateral leg support. Removable back, base and leg cushion for maximum individual seating comfort. Upholstered entirely in high breathability AIRTEX® material.
OMP Racing
OMP RS-PT2 Racing Seat
$899.00
OMP RS-PT2 Racing Seat
The OMP RS-PT2 Racing Seat features a fiberglass shell, large shoulder harness slots to accommodate various heights, and high side bolsters for lateral leg support for increased protection. The RS-PT2 is a full containment racing seat with a "halo" to limit lateral movement of the head in the event of an impact to reduce the risk of head/neck injury. Removable back cushion and split leg rests to allow maximum individual seating comfort.
The RS-PT2 seat is finished in fire resistant materials. HANS and HSC PATENT compatible.
OMP Racing
OMP FIRST-R Racing Seat
$749.00
OMP FIRST-R Racing Seat
The OMP FIRST-R Racing Seat is your gateway to the track, offering professional-grade safety and comfort in an entry-level package. Built with a fiberglass shell and upholstered entirely in velour, this seat isn’t just a place to sit—it’s your cockpit command center. With HANS® compatibility, W-side fixing points, and high side bolsters, it’s ready to keep you safe, comfortable, and in control as you chase your next personal best.
FIRST-R Racing Seat Features & Benefits
Fiberglass Shell Construction: Strong yet lightweight, the shell offers durability and support without adding unnecessary weight to your setup.
Velour Upholstery: Fully upholstered in high-quality velour for a soft, comfortable feel that doesn’t compromise durability.
HANS® Compatible: Designed to work seamlessly with your Head and Neck Support system for maximum safety on the track.
High Side Bolsters: Provides excellent lateral leg support, keeping you securely in place through every high-speed turn.
5 Harness Slots: Equipped to accommodate a 5-point harness, ensuring a snug and secure fit.
Removable Base Cushion: Customize your comfort level with the removable cushion, designed for optimal ergonomics.
W-Side Fixing Points: Easy and secure side mounting for a hassle-free installation process.
Picture This...
It’s race day. You slide into the FIRST-R Racing Seat, and it feels like it was custom-made just for you. The velour upholstery hugs you like a trusted co-pilot, while the high side bolsters hold you steady as you dive into corners. The fiberglass shell absorbs the vibrations of the track, letting you focus on the perfect line. Lap after lap, you’re not just driving—you’re commanding.
OMP FIRST-R Racing Seat Specifications
Shell Material: Fiberglass
Upholstery: Full velour
Certifications: FIA 8855-1999
Harness Compatibility: 5 harness slots (compatible with 5-point harness systems)
Mounting Points: W-side fixing points
Additional Features: HANS® compatibility, removable base cushion
Fit: Ideal for track day enthusiasts and entry-level racers
FIRST-R Racing Seat FAQs
Q: Is this seat FIA-approved?A: Yes! The FIRST-R Racing Seat meets FIA 8855-1999 standards, making it suitable for most entry-level motorsport events.
Q: Can this seat be installed in a street car?A: While technically possible, it’s designed for track use. Make sure to check local regulations if you’re planning to use it on the road.
Q: How does the removable base cushion work?A: The cushion can be removed or adjusted to fine-tune your seating position and comfort level during long stints.
Q: Does the seat work with a 6-point harness?A: While designed for 5-point harnesses, the slots may accommodate a 6-point harness. Confirm fitment with your specific harness system.
Why Choose the FIRST-R Racing Seat?
When you’re starting your racing journey, you need gear that balances performance, safety, and value. The FIRST-R Racing Seat does all that and more, giving you professional-grade features without the pro-level price tag. Whether it’s your first track day or your tenth, this seat has your back—literally.
Don’t just dream about the podium—make it your reality. Click Add to Cart now and get ready to feel the difference of racing with confidence!
Sparco S.p.A.
Sparco EVO QRT Racing Seat | Small, Med, Large or XL (2030 Expiry)
$743.20
$929.00
Sparco EVO QRT Racing Seats 2030 Expiry
2030 Expiry
As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo QRT. Starting with the shoulder bolsters, Sparco trimmed down the width to help them fit into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo QRT fits perfectly in a Miata!), the Sparco Evo QRT is sure be a mainstay at the track!
The Sparco EVO QRT series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. Available in cloth or vinyl. The Sparco EVO QRT is FIA approved.
Sparco EVO QRT Racing Seat Sizes
The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment:
EVO S – Small (up to 32” waist)
EVO – Medium (up to 34” waist)
EVO L – Large (up to 36” waist)
EVO XL – Extra Large (38” waist)
What Is Sparco QRT Technology?
Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point.
Sparco EVO QRT Racing Seat Features
QRT ultra-light fiberglass composite shell
Excellent fitment into small cockpits
Four Sizes: Small through XL
Excellent ergonomics
Fire retardant fabric
Special non-slip fabric
FIA 8855-1999 approved
Dimensions
EVO S Dimensions:
EVO Dimensions:
EVO L / XL Dimensions:
OMP Racing
OMP WRC-R Racing Seat | Regular or XL (2030)
from $726.66
$919.00
OMP WRC-R Racing Seat (2030 Expiry)
The OMP WRC-R Racing Seat offers professional-level features in a classic design with aggressive side and thigh bolsters. Upholstered in OMP's highly breathable Airtex material to keep you cool and improve performance even in the hottest conditions. The WRC-R features removable back/base cushions and a comfortable split-leg bottom cushion. High side-bolsters offer excellent lateral leg support, while the HANS-compatible shoulder harness slots accomodate various driver heights. Seat gel-coated fiberglass shell. Large . High side bolsters for lateral leg support for higher protection. Removable back, base and leg cushion for maximum individual seating comfort.
Available in both Regular and XL sizes (the XL is wider and taller).
OMP WRC-R Racing Seat Features
FIA homologated to 8855-1999 standard
Removable cushions in the back, base and split leg
High side bolsters for great lateral leg support
Large harness slots
19.4 lbs (8.8 kg) Regular
23.5 lbs (10.7 kg) XL
