New Products

The Premium Bolt-In Roll Bar for the Subaru WRX (VB Chassis) Fits the Following Vehicles: Subaru WRX VB (2022+), all trim levels The CMS Performance Roll Bar is the strongest, safest, most precisely engineered bolt-in roll bar available for the 2022+ Subaru WRX. Designed with a focus on safety, chassis rigidity, and OEM-level fitment, the CMS Performance Roll Bar integrates seamlessly with the WRX’s modern rally-inspired interior. Every CMS roll bar is built exclusively from Docol R8 Advanced High-Strength Steel, offering exceptional tensile strength, energy absorption, and occupant protection. Docol R8 is 15% stronger than 4130 CrMo and 30% stronger than mild (DOM) steel commonly used by other manufacturers. Superior in Every Way This construction makes the CMS Performance Roll Bar for the WRX superior in resistance to deformation, weld integrity, and energy dissipation. The one-piece main hoop with integrated X-bracing and harness bar bolts directly to reinforced chassis points, creating the structural backbone of the system. The rearward kickers are engineered to maximize roll-over protection while maintaining excellent rearward visibility. The harness bar positions shoulder straps at the ideal angle (0° to -20°) for proper racing-harness geometry across a wide range of seat positions. True Bolt-In Installation Without Sacrificing Strength or Fitment Installation instructions are coming soon! The CMS Performance Roll Bar bolts directly into the WRX’s chassis mounting points with no cutting, no welding, and no backing plates required. Full 360° TIG welding provides exceptional strength and long-term durability. This is a true plug-and-play roll bar designed for weekend track drivers and dedicated time-attack enthusiasts alike. Exceptional Color Options Set CMS Performance Apart Every CMS Performance Roll Bar includes custom powder coating in your choice of factory-matched Subaru colors for the 2022+ WRX1. You can also opt for CMS technical finishes—including the brilliant Superchrome—or go with a clean satin black for a stealth look. No need to settle for generic colors. Optional WRX Rear Seat Delete Kit A custom CMS Performance rear seat delete kit is available for the 2022+ WRX. Designed specifically to integrate with the CMS Roll Bar, it delivers a clean, factory-quality finish while maximizing weight reduction and usability. CMS Performance: Premium Materials. Precision Construction. Industry-leading materials, intelligent engineering, and meticulous craftsmanship have made CMS Performance roll bars the benchmark for track-focused enthusiasts. The WRX (VB) Roll Bar continues that legacy, offering unmatched strength, fitment, and customization for drivers ready to push their Subaru further on the street or at the circuit. CMS Performance Roll Bar Details Manufacturer: CMS Performance Manufacturer Part: CPRB-WRXVB Materials: 1.75″ × .095" Docol R8 Advanced High-Strength Steel One-piece main hoop for maximum safety and rigidity Proprietary kicker design for exceptional strength and simplified installation CNC-cut mounting plates for precise chassis alignment CNC-machined high-strength steel interlocking joints Allows full seat travel with nearly all OEM and aftermarket seats All USA-made Grade 8 hardware included Comes with detailed installation instructions (PDF) 1Note: Powder coating is professionally matched to OEM Subaru paints. As with all powder-coated finishes, slight variance versus liquid paint is normal but not noticeable once installed inside the vehicle. This product is intended for off-road race-track use only.

Bell HP77 Gabriel Bortoleto 2025 Mini Bell Helmet Replica 1:2 The Bell HP77 Gabriel Bortoleto 2025 Mini Helmet is a stunning 1:2 scale replica of the helmet worn by Bortoleto during the 2025 Formula One season. Handcrafted by Bell Racing Helmets in the same factory as the full-size HP77 race helmets, this collector’s piece perfectly captures the precision, design, and flair of Kick Sauber Formula One team. Precision Replica of the 2025 Gabriel Bortoleto Helmet Each Bell 1:2 scale mini helmet is crafted using premium materials, mirroring the shell structure, visor design, and internal padding of the full-scale original. Produced under the guidance of Bell’s top engineers, these replicas showcase the same attention to aerodynamics, safety design, and finish that define the real HP77 helmet. Features Scale: 1:2 Crafted by Bell Racing Helmets for Kick Sauber F1 Shell Material: 77% Fibre Reinforced Plastic Interior: 15% Cotton Fabric + Foam Hardware: 8% Metal Components Weight: 0.5 kg Dimensions: 180mm (W) x 140mm (H) x 135mm (D) Bell HP77 Gabriel Bortoleto 2025 Mini Bell Helmet FAQs: Is this the same design Gabriel Bortoleto wore during the 2025 F1 season? Yes, this mini helmet replicates the exact 2025 season design worn by Gabriel Bortoleto while driving for Kick Sauber. Is the Bell HP77 Mini Helmet officially licensed? Absolutely. It’s officially licensed by the Kick Sauber Formula One Team and produced by Bell Racing Helmets. Can the visor be opened or adjusted? The visor is fixed for display purposes, designed to maintain structural integrity and an authentic look. Does the helmet come with a display case or box? Yes, each helmet includes a custom-designed collector’s box for safe storage and presentation. What materials are used to make the helmet? The helmet combines fibre-reinforced plastic, cotton fabric with foam interior, and metal components—mirroring the composition of the full-scale HP77. Celebrate the speed, precision, and craftsmanship of Formula One with this Bell HP77 Gabriel Bortoleto 2025 Mini Helmet Replica.

Bell HP77 Fernando Alonso 2025 Mini Bell Helmet Replica 1:2 The Bell HP77 Fernando Alonso 2025 Mini Helmet is a stunning 1:2 scale replica of the helmet worn by Alonso during the 2025 Formula One season. Handcrafted by Bell Racing Helmets in the same factory as the full-size HP77 race helmets, this collector’s piece perfectly captures the precision, design, and flair of Aston Martin Aramco Formula One team. Precision Replica of the 2025 Fernando Alonso Helmet Each Bell 1:2 scale mini helmet is crafted using premium materials, mirroring the shell structure, visor design, and internal padding of the full-scale original. Produced under the guidance of Bell’s top engineers, these replicas showcase the same attention to aerodynamics, safety design, and finish that define the real HP77 helmet. Features Scale: 1:2 Crafted by Bell Racing Helmets for Aston Martin Aramco F1 Shell Material: 77% Fibre Reinforced Plastic Interior: 15% Cotton Fabric + Foam Hardware: 8% Metal Components Weight: 0.5 kg Dimensions: 180mm (W) x 140mm (H) x 135mm (D) Bell HP77 Fernando Alonso 2025 Mini Bell Helmet FAQs: Is this the same design Fernando Alonso wore during the 2025 F1 season? Yes, this mini helmet replicates the exact 2025 season design worn by Fernando Alonso while driving for Aston Martin Aramco. Is the Bell HP77 Mini Helmet officially licensed? Absolutely. It’s officially licensed by the Aston Martin Aramco Formula One Team and produced by Bell Racing Helmets. Can the visor be opened or adjusted? The visor is fixed for display purposes, designed to maintain structural integrity and an authentic look. Does the helmet come with a display case or box? Yes, each helmet includes a custom-designed collector’s box for safe storage and presentation. What materials are used to make the helmet? The helmet combines fibre-reinforced plastic, cotton fabric with foam interior, and metal components—mirroring the composition of the full-scale HP77. Celebrate the speed, precision, and craftsmanship of Formula One with this Bell HP77 Fernando Alonso 2025 Mini Helmet Replica.

Complete Wheel Package for the Porsche 718 GT4 RS BBS FI-R Evo Porsche GT4 RS Forged Line Exclusive Series Buckle up, GT4 RS purists, because the BBS FI-R Evo is here to redefine what perfection looks like in forged aluminum. This isn’t just another wheel set — it’s BBS taking everything they’ve learned on the track and wrapping it into a street-legal masterpiece for the most hardcore Porsche drivers. If your GT4 RS already makes your heart race, these wheels are about to make it skip a few beats. The FI-R Evo represents the evolution of BBS’s most iconic design. More precision, more cutouts, more edge. It’s lighter, stronger, and engineered to make your GT4 RS feel like it’s running on pure adrenaline. When performance meets art, this is the result — form following function in perfect harmony. BBS FI-R Evo GT4 RS Package Wheel Sizes and Weights Front: 20x8.5 ET+61 – approx. 17.7 lbs (8.2 kg) Rear: 20x11 ET+50 – approx. 19.3 lbs (9.9 kg) With the same offsets as the factory GT4 RS setup, this package delivers flawless fitment, maintaining OEM geometry and balance while shedding critical unsprung weight. The FI-R Evo’s signature Y-spoke design with machined spoke reliefs further reduces mass while maximizing strength and airflow around your brakes. Every ounce saved translates directly to sharper steering and faster lap times. Imagine rolling into pit lane — the sound of that 4.0L flat-six reverberating off the walls, and those BBS spokes catching the light like liquid metal. The FI-R Evo doesn’t whisper performance — it shouts it. Built for the driver who wants every apex conquered, every downshift precise, and every lap just a little faster than the last. Quick Specs for the Speed Obsessed One-piece forged aluminum from the BBS Motorsports Division in Germany Enhanced spoke machining for maximum rigidity and minimal weight Center lock fitment – direct bolt-on for Porsche GT4 RS (no adapters required) Finishes: Diamond Black, Platinum Silver, Satin Bronze, and Gloss Black Designed to clear factory GT4 RS carbon-ceramic and steel brake systems Vehicle Fitment Direct fit for Porsche 718 GT4 RS (2022+). Same offsets and specifications as factory center lock wheels. Compatible with: 2022+ Porsche 718 Cayman GT4 RS (Center Lock) Why You’ll Love the FI-R Evo Forged from aerospace-grade aluminum using a proprietary multi-stage process, each BBS FI-R Evo wheel is a perfect balance of form and function. The refined spoke reliefs and high-pressure forging create a wheel that’s not just light — it’s relentless. Expect faster steering response, reduced rotational inertia, and that unmistakable BBS feel that connects you directly to the tarmac. FAQs How does the FI-R Evo differ from the standard FI-R?The Evo version adds advanced machining, optimized material removal, and new spoke cutouts for even greater weight reduction without compromising stiffness or strength. Is this a direct bolt-on for the GT4 RS?Yes. The 20x8.5 +61 front and 20x11 +50 rear fit exactly like the stock Porsche setup, retaining OEM ride quality and alignment geometry. Are these wheels in stock or made-to-order?Competition Motorsport stocks popular GT4 RS fitments and finishes. Some configurations are made-to-order with short lead times directly from BBS Germany. So, what are you waiting for? If you want to feel the difference — the real, heart-pounding, pulse-racing difference — that a set of BBS FI-R Evo wheels can make to your Porsche GT4 RS, it’s time to stop reading and start clicking. Transform your ride, your drives, and your race days. Get the BBS FI-R Evo wheels now and write your legend one corner at a time. Hit that purchase button and never look back — except maybe in your rearview mirror to see who’s trailing behind you. BBS FI-R remains one of the most iconic and respected wheel models ever produced. But BBS didn’t stop there — they evolved it. Enter the FI-R Evo: an even lighter, stronger, more refined wheel featuring additional spoke cutouts and new fitments for the latest Porsche performance models like the GT4 RS, 992 GT3, and 992 Turbo. BBS FI-R Evo Forged Line Exclusive Series wheels for Porsche center-lock applications are one-piece forged aluminum masterpieces designed and produced in the legendary BBS Motorsports Department for track-focused or performance-minded Porsche owners. The signature five-Y-spoke design incorporates strategically machined reliefs to deliver exceptional lightness while maintaining the durability required for serious motorsport use. These Porsche-specific BBS Forged Line Exclusive Series wheels are typically made-to-order, but Competition Motorsport often keeps popular finishes, sizes, and offsets in stock. Call one of our BBS wheel specialists at (844) 438-7244 for a personalized quote and real-time availability. We’ll make sure you get the perfect fit, the right finish, and a price that can’t be beat.

Bell HP77 George Russell 2025 Mini Bell Helmet Replica 1:2 The Bell HP77 George Russell 2025 Mini Helmet is a stunning 1:2 scale replica of the helmet worn by George Russell during the 2025 Formula One season. Handcrafted by Bell Racing Helmets in the same factory as the full-size HP77 race helmets, this collector’s piece perfectly captures the precision, design, and flair of Mercedes-AMG PETRONAS Formula One Team engineering. Precision Replica of the 2025 George Russell Helmet Each Bell 1:2 scale mini helmet is crafted using premium materials, mirroring the shell structure, visor design, and internal padding of the full-scale original. Produced under the guidance of Bell’s top engineers, these replicas showcase the same attention to aerodynamics, safety design, and finish that define the real HP77 helmet. Features Scale: 1:2 Crafted by Bell Racing Helmets for Mercedes-AMG PETRONAS F1 Shell Material: 77% Fibre Reinforced Plastic Interior: 15% Cotton Fabric + Foam Hardware: 8% Metal Components Weight: 0.5 kg Dimensions: 180mm (W) x 140mm (H) x 135mm (D) Includes custom presentation box Bell HP77 George Russell 2025 Mini Bell Helmet FAQs: Is this the same design George Russell wore during the 2025 F1 season? Yes, this mini helmet replicates the exact 2025 season design worn by George Russell while driving for Mercedes-AMG PETRONAS. Is the Bell HP77 Mini Helmet officially licensed? Absolutely. It’s officially licensed by Mercedes-AMG PETRONAS Formula One Team and produced by Bell Racing Helmets. Can the visor be opened or adjusted? The visor is fixed for display purposes, designed to maintain structural integrity and an authentic look. Does the helmet come with a display case or box? Yes, each helmet includes a custom-designed collector’s box for safe storage and presentation. What materials are used to make the helmet? The helmet combines fibre-reinforced plastic, cotton fabric with foam interior, and metal components—mirroring the composition of the full-scale HP77. Celebrate the speed, precision, and craftsmanship of Formula One with this Bell HP77 George Russell 2025 Mini Helmet Replica.

Sparco Stealth RF (SA2025 / FIA 8859-2024) The Sparco Stealth RF helmet combines advanced motorsport protection with comfort and precision fit. Constructed from a lightweight fiberglass shell, it exceeds FIA 8859-2024 and Snell SA2025 standards—delivering top-tier safety without unnecessary weight. Designed for racers who demand confidence behind the wheel, it’s engineered for superior impact absorption, ventilation, and long-term comfort. Lightweight Protection, Race-Ready Design Every element of the Stealth RF was created to enhance performance under pressure. Its aerodynamic shell keeps you stable at speed, while the efficient multi-vent system prevents heat buildup so you can stay focused through the longest stints. The removable fire-retardant lining keeps you cool and clean, and the helmet comes ready with factory-installed HANS posts for immediate use on track. SPARCO STEALTH RF HELMET FEATURES • Lightweight fiberglass shell exceeding FIA 8859-2024 and Snell SA2025 standards• Advanced ventilation with front chin and top intakes plus rear exhaust ports• Removable, washable fire-retardant lining for long-term freshness• Optional drink-system compatibility for endurance racing• Three-position adjustable visor for optimized airflow and clarity• Central locking visor mechanism for a secure, race-grade seal• Factory-installed FHR (HANS) posts ready for use• Dual shell sizes for ideal fit and weight balance• Seven available sizes to accommodate a wide range of drivers SPARCO STEALTH RF HELMET SIZE CHART SPARCO STEALTH RF HELMET FAQs: Is the Stealth RF certified for competition? Yes. It meets both FIA 8859-2024 and Snell SA2025 homologation standards, making it eligible for most major racing series. Can I remove and wash the interior? Yes, the fire-retardant liner is fully removable and washable for easy cleaning between events. Does it include HANS posts? The Stealth RF comes from the factory with FHR (HANS) posts installed and ready to use. Is a drink system supported? Yes. The helmet is pre-drilled to accommodate an optional drink-tube setup for endurance and long-distance racing. The Sparco Stealth RF offers elite-level safety and comfort in one streamlined package—built for drivers who take every lap seriously.

The Premium Bolt-In Roll Bar for the GR Corolla Fits the Following Vehicles: Toyota GR Corolla GZEA14 (2023+) The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the GR Corolla. Engineered with a premium placed on safety and structural rigidity, the exceptional design of the CMS Performance Roll Bar integrates perfectly with the car's sporty, rally-inspired interior. CMS Performance uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength, impact absorption, and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used by other roll bar manufacturers. Superior in Every Way This makes the CMS Performance Roll Bar for the GR Corolla superior in every way, including resistance to deformation, weld integrity, and energy dissipation. The one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. The rearward kickers are optimized for support in a roll-over event while maintaining an unobstructed rear view for the driver. The main hoop cross bar is designed to locate your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) to the driver's shoulders regardless of seat position. True Bolt-In Installation Without Sacrificing Safety or Looks Installation instructions can be found here. The CMS Performance Roll Bar bolts directly to chassis strong points without the need for any significant modifications to the chassis or use of under-car backing plates. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. No welding or chassis cutting is involved in installation – a truly plug-and-play roll bar! Exceptional Color Options Set CMS Performance Apart Each CMS Performance roll bar includes custom powder coating in your choice of color-matched factory paint colors for your GR Corolla1! You don't have to settle for generic black, white, red, or yellow. CMS Performance can also powder coat your roll bar in one of our amazing technical colors, such as the astoundingly cool Superchrome! And, of course, there's always our rich satin black option for a stealthy installation. Custom Made Rear Seat Delete Kit Available CMS Performance offers an optional customized rear seat delete kit made specifically for the GR Corolla. It is specially modified to fit the CMS Performance Roll Bar, giving your installation an amazing factory-finished look. CMS Performance: The Best Products At The Best Price An unwavering focus on cutting-edge materials, unsurpassed design & construction, and premium fit & finish has propelled CMS Performance roll bars to the top of the industry. The CMS Performance GR Corolla Roll Bar is the latest addition to our growing catalog, offering unsurpassed safety, integrity, design and customization to customers taking this amazing car to the next level on the street or at the track. CMS Performance Roll Bar Details Manufacturer: CMS Performance Manufacturer Part: CPRB-GRCOR Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel Features: One-piece main hoop for superior strength and occupant safety; proprietary kicker design eases installation while maintaining exceptional strength CNC-cut mounting plates CNC machined high-strength-steel interlocking joints Allows full seat travel with virtually any seat All USA-made Grade 8 hardware included Comes with detailed installation instructions 1 Note: powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight variance from the OEM paint color is normal and is imperceptible with the roll bar installed inside the car. This product is intended for off-road race track use only.

Sparco ADV Prime Pad Carbon Racing Seat | FIA 8862-2009 The Sparco ADV Prime Pad Carbon Racing Seat represents the ultimate in FIA 8862-2009 safety homologation, engineered for professional motorsport where maximum protection, rigidity, and weight savings are critical. Constructed from advanced carbon fiber with energy-absorbing foam and K-Point self-extinguishing fabric, this seat is built to perform at the highest levels of competition. Advanced Carbon Safety Cell The Sparco ADV Prime Pad is manufactured with a full carbon fiber monocoque shell, designed to exceed FIA 8862-2009 safety standards. It features a new lining design with removable double-density pads, a full-length cushion with separate leg rest, and self-extinguishing fabric for maximum fire resistance. Energy-absorbing padding is integrated for impact protection. Sparco ADV Prime Pad Features FIA 8862-2009 homologation (No. AS.095.21) Lightweight carbon fiber shell for maximum rigidity and safety New K-Point self-extinguishing fabric for durability and fire resistance Removable double-density padding and full-length cushion for ergonomic comfort Integrated energy-absorbing foam to meet FIA impact standards M12 side mounting with 290 mm spacing for FIA-compliant installation Add Sparco ADV Prime Side Mount Brackets (004990ADV) Sparco ADV Prime Pad Carbon Racing Seat FAQs: What is FIA 8862-2009? FIA 8862-2009 is the highest FIA homologation for seat safety, requiring the seat to withstand extremely high impact loads during testing. Is this seat suitable for road use? No. FIA 8862-2009 seats are intended strictly for competition vehicles with approved mounting structures. Can the padding be replaced? Yes. The ADV Prime Pad features removable double-density pads that can be replaced or adjusted for fit. What mounting hardware do I need? This seat requires FIA-homologated side mounts using M12 bolts and 290 mm lateral spacing. Does this seat expire? FIA 8862-2009 seats typically have a 10-year homologation life from the date of manufacture, with possible extensions depending on regulations. Upgrade your race car with the Sparco ADV Prime Pad Carbon Racing Seat and meet the highest levels of safety, comfort, and performance on the track.

Stilo ST6 GT Carbon Fiber SA2025 Racing Helmet The legendary Stilo carbon helmet‚ lighter, cooler, clearer For over 25 years Stilo has led racing-helmet innovation, and the ST6 line marks a bold new chapter. With input from top programs, engineers refined the front and top aerodynamics for high-speed stability. The carbon ST6 prioritizes airflow, visibility, and comfort while maintaining modern safety standards. From track-tested aero to a dual-lock visor system, every detail is designed to give racers a performance edge. The ST6 improves on the market-leading ST5 in key areas: 10% lighter than Stilo ST5 26% more airflow than Stilo ST5 11% more visibility Refined liner and cheek pads More shell sizes for optimized weight Reworked visor construction for durability and easy care Updated visor hardware for reliability Stilo ST6 GT Carbon Helmet Features Puro Tech: Stilo's carbon fiber manufacturing process minimizes extra coatings to reduce mass without compromising protection. New shell size options: now offered in three shell sizes to deliver the smallest, lightest shell appropriate for your head size. Increased airflow design: redesigned front intake and top vents route air through EPS channels to reduce sweat and moisture. Increased downward visibility: a wider eyeport improves belt fastening and cockpit awareness. Interior comfort: reshaped cheek pads stabilize fit and comfort at speed. Injection-molded visor: clear optics with a washable high-performance anti-fog treatment. Dual visor lock: compliant with FIA standards in both closed and vent positions. Updated visor hardware: smoother actuation and easier installation; available in anodized finishes. Stilo Helmets ST6 GT Carbon Fiber Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0800AF1X Homologation: FIA 8858-2015 (FHR posts) Certification: Snell SA2025 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs included Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 FN SA2025 Carbon Fiber Helmet Stilo ST6 FN 8859-ABP Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero 8860-2018 ABP Carbon Fiber Helmet Stilo ST6 GT Composite Helmet Stilo ST6 FN 8859-ABP Carbon Fiber Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860 Carbon Fiber Helmet Stilo ST6 FN 8860-ABP Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Measuring Your Head for Your New Stilo ST6 GT Carbon Fiber Helmet The most effective helmet is one that fits properly. Have an assistant measure the circumference of your head about an inch above your eyebrows, around the largest point at the back, and back to the front. Take multiple measurements and use the largest. What's Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020‚ not a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo ST6 GT Carbon SA2025 Helmet FAQs Is this Snell SA2025 certified? Yes, this listing reflects SA2025 certification. What's the difference between GT and FN? GT includes earmuffs for noise reduction and comms; FN is open-ear for maximum awareness and airflow. Can I use ST5 shields on the ST6? No. The ST6 uses its own shield family; choose ST6-specific shields and hardware. How should I choose my size? Measure head circumference and consult the pad chart; if between sizes, many drivers prefer the tighter fit for stability. This helmet will ship with signature required for delivery.

Stilo ST6 FN ABP Carbon Fiber 8859-2024 / SA2025 Racing Helmet Advanced ABP protection with Snell SA2025 performance For over 25 years Stilo has led helmet innovation, and the ST6 FN ABP marks a new benchmark. With development input from top programs, the ST6 refines front and top aero for stability, broadens airflow, and expands visibility so you can focus on driving. Built from carbon fiber for a light, rigid shell, the ST6 FN ABP blends comfort and cooling with modern safety. From the dual-lock visor system to the revised eyeport and venting, every detail is aimed at confidence and consistency on track. The ST6 improves on the market-leading ST5 in key areas: 10% lighter than Stilo ST5 26% more airflow than Stilo ST5 11% more visibility More comfortable liner and cheek pads More shell sizes for lower weight Improved visor construction for durability and ease of care Higher quality visor hardware for increased reliability Stilo ST6 FN ABP 8859-2024 Carbon Fiber Auto Racing Helmet Features Puro Tech, Stilo's carbon fiber manufacturing approach minimizes extra coatings to reduce mass while maintaining protection. New shell size options: Stilo ZERO and ABP helmets are now offered in four shell sizes to deliver the smallest, lightest shell appropriate for your head. Increased airflow design: redesigned front intake and new top vents route air through EPS channels to reduce sweat and moisture. Increased downward visibility: a wider eyeport speeds up belt fastening and improves situational awareness. Interior comfort: reshaped cheek pads stabilize fit and comfort at speed. Injection-molded visor: improved optical clarity with a washable high-performance anti-fog treatment. Dual visor lock ‚Äì compliant with FIA standards in both closed and vented positions. Updated visor hardware: smoother actuation and easier installation; available in anodized finishes. Stilo ST6 FN ABP Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0810AF1WY Homologation: FIA 8859-2024 ABP Certification: Snell SA2025 Compatible shields: Stilo ST6 ABP helmet shields Open-ear FN design for maximum awareness and cooling Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 GT SA2025 Carbon Fiber Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet Stilo ST6 GT Composite Helmet Stilo ST6 FN 8860 Carbon Fiber ABP Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860 Carbon Fiber Helmet Stilo ST6 FN Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Stilo ST6 FN ABP 8859-2024 Sizing Note Customers who typically wear a size 59 in other brands are often most comfortable in a Stilo size 60, which uses the large shell. How to Measure for Your Stilo ST6 FN ABP Helmet Use a dressmaker‚Äôs tape or string to measure around your head about one inch above your eyebrows and around the largest point at the back. Take multiple measurements and use the largest. Proper fit is critical for comfort and safety. What's Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020‚Äînot a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo ST6 FN ABP 8859-2024 / SA2025 Helmet FAQs: Is this helmet Snell SA2025 certified? Yes, this helmet has both SA2025 certification and FIA 8859-2024 ABP homologation. What does ABP mean? ABP indicates additional frontal protection meeting the FIA's Advanced Ballistic Protection requirement. What's the difference between Stilo's FN and GT helmets?  The ST6 GT is designed for closed-cockpit cars (and is often marketed for that “GT” style car environment). It features molded-in side ports for forced air, comms, and/or hydration kits integrated into the helmet shell itself. The ST6 FN is optimized for open-cockpit, formula / sprint / open-wheel style cars. It has an aerodynamic advantage because it does not feature the side ports present on the GT model. Can I use ST5 shields on the ST6? No. The ST6 uses its own shield family; choose ST6-specific shields and hardware. This helmet will ship with signature required for delivery.

Stilo ST6 GT Composite SA2025 Racing Helmet The legendary Stilo composite—lighter, cooler, clearer For over 25 years, Stilo has led racing-helmet innovation and the ST6 line marks a bold new chapter. With input from top programs, engineers refined front and top aerodynamics for stability at speed. The ST6 GT Composite emphasizes airflow, visibility, and long-stint comfort while meeting modern safety targets. From track-tested aero to a dual-lock visor system, every update is about confidence in the car. The ST6 improves on the market-leading ST5 in key areas: ~10% lighter than Stilo ST5 ~26% more airflow than Stilo ST5 ~11% wider downward visibility Refined liner and cheek pads More shell sizes to optimize weight Reworked visor construction for durability and easy care Updated visor hardware for smoother actuation Stilo ST6 GT Composite Auto Racing Helmet Features Puro Tech: Stilo's composite process minimizes extra coatings to reduce mass without compromising protection. Added shell size: now offered in three shell sizes, the ST6 GT helps deliver the smallest, lightest shell appropriate for your head size. Increased airflow design: redesigned front intake and top vents route air through EPS channels to reduce sweat and moisture. Increased downward visibility: a wider field of view speeds up belt fastening and improves situational awareness. Interior comfort: revised cheek padding stabilizes fit and comfort at speed. Injection molded visor: clear optics with a washable high-performance anti-fog treatment. Dual visor lock: compliant with FIA standards in both closed and vent positions. Updated visor hardware: smoother actuation and easier installation; available in anodized finishes. Stilo Helmets ST6 GT Composite Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0800AF2X Homologation: FIA 8858-2015 Certification: Snell SA2025 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs Stilo ST6 Size & Measurement Customers who typically wear a size 59 in other brands are often most comfortable in a Stilo size 61 (large shell). If you’re between sizes, many drivers prefer the tighter option for stability. What’s Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020—not a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo ST6 GT Composite SA2025 Helmet FAQs Is this Snell SA2025 certified? Yes, this listing reflects SA2025 certification for U.S. auto racing. What’s the difference between GT and FN? GT includes earmuffs for noise reduction and comms; FN is open-ear for maximum awareness and airflow. Can I reuse ST5 shields? No, the ST6 uses its own shield family; choose ST6-specific shields and hardware. Ships with signature required.

CMS Performance Racing Tow Strap Mount for Porsche Fits the Following Cars: Porsche 981 (All) Porsche 718 (All) Porsche 982 (All) Note: does not fit 992, 997, 987, and earlier Porsches with right-hand threaded tow hooks. When the unexpected happens at the race track, your tow straps get your Porsche back in the game without skipping a beat. To do that, you need to have a super strong, rock-solid connection to your car. That's where CMS Performance Racing Tow Strap Mounts come in. American Made Performance That Moves You Forward The CMS Performance Tow Strap Mount is a lightweight but ultra-strong bracket to mount your fabric racing tow straps (which can be added to your order above) to your Porsche1. CNC machined from American billet 7075-T6 aerospace-grade aluminum, these workhorse mounts won't deform under load when things go sideways and you need to be pulled back into the race. Designed to fit the front and rear tow hook receivers on popular race and track-day Porsche models, these mounts accept Sparco or Sabelt racing tow straps with a 15mm mounting hole. Key Features: Precision Engineering: Designed and machined in the USA with a racer’s mindset for maximum performance, safety, and simplicity. Lightweight Strength: Every gram saved matters when you’re chasing lap times and podiums. But you can't sacrifice strength. These mounts are CNC milled from 7075-T6 aerospace-grade aluminum. Built for Competition: Meets the standards serious racers demand on and off the track. Specifications: CNC milled in the USA from American-forged aluminum billet Length (tip of threads to base of mounting flange): Front, 5.50 in. (139.7 mm); Rear, 4.75 in. (120.7 mm) Diameter (main shaft): 0.75 in. (19 mm) Tow strap hole diameter: 15mm Mounting threads: Porsche DIN RND405 M20 x 1/8" High-performance 7075-T6 aerospace aluminum Track-tested durability Optimized for professional motorsports Includes Allen bolt and machined tow strap spacer FAQs: Can this mount be used on the street or is it track only?This product is specifically optimized for track and race environments, but it can be used on street cars as well. How does it compare to similar products?Designed for maximum performance and the extraordinary rigors of racing, this tow strap mount orients your tow straps correctly to maximize their strength and effectiveness, offering superior durability and functionality over typical alternatives. Why Buy From Competition Motorsport? We live racing. That means offering only track-proven gear, expert advice, and fast shipping so you’re never left waiting in the paddock. Let’s get you dialed in for success. 1 Racing tow straps are sold separately, or can be added in the dropdown above.

CMS Special Edition – Sabelt Hero TG-11 Geckotech Racing Gloves The Competition Motorsport Special Edition Sabelt Hero TG-11 Geckotech Gloves combine elite FIA 8856-2018 fireproof protection with unmatched grip and comfort, delivering everything you need to stay cool, confident, and in control on the track. Fireproof Like A Dragon's Hide Crafted to meet rigorous FIA 8856-2018 standards, these gloves offer maximum fire resistance. You might not breathe fire, but your hands will stay protected from the heat of the race. Competition Motorsport Special Edition Sabelt TG-11 Race Glove Features: Grip Like A Gecko: Silicon-infused palms give you unbeatable steering wheel control, almost like gecko-level superpowers at your fingertips. Ironclad Durability: Reinforced internal palm construction makes these gloves tough enough to handle race after race without compromise. Comfort Fit For A King: The updated ergonomic design hugs your hands naturally, eliminating the bulkiness of older glove styles. Sleek As A Race Car: The aerodynamic profile not only looks sharp but minimizes drag for every microsecond advantage. Tailored To You: Available in sizes 8–12, ensuring a perfect fit for drivers of all styles. Competition Motorsport Special Edition | Sabelt Hero TG-11 Geckotech FAQs: Are these genuine Sabelt Hero TG-11 Geckotech racing gloves? Yes they are. Sabelt and CMS collaborated to bring you these top-of-the-line Hero TG-11 Geckotech gloves featuring Special Edition Competition Motorsport livery. Are these gloves FIA approved? Yes, they are FIA 8856-2018 homologated for top-level motorsport competition. What makes the Geckotech grip unique? The silicon-infused palm provides maximum grip even in sweaty or high-intensity racing conditions. How is the Competition Motorsport edition different? This special edition features exclusive Competition Motorsport branding combined with the proven Hero TG-11 performance. Do these gloves run true to size? Yes, they are designed with an updated fit that matches standard sizing for racing gloves. Take control with the Competition Motorsport Special Edition Sabelt Hero TG-11 Geckotech Gloves. Built for racers who demand the best in grip, comfort, and protection, these gloves are ready for your next victory.

SilverRocket Titanium Ultralight Race Pipe 13.9kg Lighter. 15HP Stronger. Pure Racing Sound. This product fits the following cars: Porsche 718 GT4 RS/ Boxster Spyder Porsche 718 GT4 RS Clubsport/Leichtbau The Lightest Exhaust In The World For The Porsche GT4 RS The SilverRocket Race Pipe is engineered exclusively for superior track performance. The SilverRocket Race Team's development objectives were: Ultra-lightweight design to reduce vehicle weight as much as possible Exceptional durability to withstand intense race conditions. Distinctive RSR-style, high-energy race car sound. Optimized rear underbody clearance for the upcoming SR high-downforce diffuser After four full prototype versions and 16 revisions, plus rigorous testing on FIA Level 1 and 2 tracks over nine months and 4,500 kilometers on-track, the SilverRocket Race Pipe achieves all these objectives and is ready for your Porsche! The SilverRocket Titanium Ultralight Race Pipe is the ultimate exhaust upgrade for serious track enthusiasts and Porsche GT4 RS owners demanding peak performance. Engineered for uncompromising racing conditions and validated through over 4,500 kilometers of on-track testing, this pipe delivers a rare blend of performance, durability, and race-bred sound. Constructed from high-grade titanium, the SilverRocket Race Pipe weighs just 3,200 grams—cutting an incredible 13.9 kilograms off your GT4 RS. This minimalist, one-piece design not only reduces weight dramatically but also improves structural integrity and heat resistance under extreme conditions. Race-Validated Power Gains Thanks to its streamlined architecture and optimized airflow path, the SR Race Pipe delivers a significant boost of 15 horsepower over the stock muffler. Its proprietary X-Cross airflow collision and outlet narrowing design enhances exhaust velocity, producing the razor-sharp, high-pitched tone reminiscent of the legendary Porsche RSR race car. Track-Ready Fitment and Compatibility The overall height at the rear is lifted by 4cm to accommodate the upcoming SR high-downforce diffuser, ensuring compatibility with future aerodynamic upgrades. Precision-engineered to fit seamlessly with the Porsche GT4 RS factory tailpipe, it also works flawlessly with OEM headers and over-axle pipes—without triggering a check engine light. Durability Built for Endurance Equipped with SilverRocket’s innovative Flatbed Fixing Mechanism, this pipe minimizes vibration stress on high-load circuits, dramatically extending its service life in extreme racing environments. Material: Aerospace-grade titanium Weight: 3.2 kg (13.9 kg lighter than OEM!) Power Gain: +15 HP over stock Exhaust Note: High-pitched RSR-inspired tone Fitment: OEM tailpipe compatible, works with OEM header & OAP Ride Height: +4CM clearance at rear for diffuser compatibility Will this trigger a CEL?No. When installed with OEM headers and over-axle pipes, the SR Race Pipe does not trigger the check engine light. Can I use the factory tailpipe?Yes. The original Porsche GT4 RS tailpipe fits directly with no modification. Is this suitable for street use?This product is engineered for racing use only and may not comply with emissions regulations in certain regions. Unleash your GT4 RS with the SilverRocket Titanium Ultralight Race Pipe—where reduced weight, increased power, and that unmistakable RSR scream come together for the ultimate on-track advantage.

Alpinestars Supertech Racing Shoes Certified to FIA 8856-2018 and SFI 3.3/5 homologation standards The new Alpinestars Supertech auto racing shoe boasts a new, fully knitted upper construction designed to deliver the closest, most comfortable fit, adapting to the morphology of your feet and improving comfort in the cockpit to reduce driver fatigue. The ultra-lightweight Supertech shoes feature a full carbon heel cup for a secure heel lockdown, holding the foot firmly in place. The shoes have a 3D printed midsole manufactured using Digital Light Synthesis. This optimizes cushioning in key areas: softer under the heel bone, but stiffer at the edges for maximum stability. The memory foam heel padding reduces vibrations transmitted to the heel, reducing discomfort, while the ultra-thin rubber outsole gives the driving feel required for maximum performance. Alpinestars Supertech Key Features Ultra-lightweight, knitted upper offers superior driver comfort in forefoot. Thermo-formed carbon heel cup provides secure heel lockdown. 3D printed midsole offers premium soft cushioning, whilst retaining maximum stability. Alpinestars Supertech Construction Ultra-lightweight racing shoe featuring a fully knitted fire retardant upper, made from a blend of aramidic fibers to offer drivers unsurpassed comfort, and breathability, as well as a precise and secure fit around the foot. Engineered stretch tongue zone and ankle collar area for optimum fit, with rear pull tab for ease of entry while putting on the shoe. Upper overlay skin for durability and support while providing flex points for comfort when walking. Thermo-formed carbon fiber heel cup provides secure heel lockdown. 3D printed midsole allows for multi density cushioning, softer under the heel bone but stiffer at the edges for maximum stability. Redesigned F1-derived ultra-thin rubber outsole delivers greater feel, improved sensitivity with the pedals, and optimum levels of grip. The textured rubber outer sole has an asymmetric tread and is water repelling and oil resistant to offer high levels of grip. Lightweight memory padding around the heel reduces vibrations being transmitted to the heel bone, while the seamless Achilles zone construction provides enhanced driver comfort. Lightweight flat lacing ensures secure fit and reduces pressure points.

OMP TECNICA SUPER LIGHT Race Suit Featherweight Performance, Maximum Protection—Because Speed Doesn’t Like Extra Baggage. You know that feeling when you’re strapped into your car and adrenaline takes over? The OMP Tecnica Super Light Driver Race Suit is built for those moments—the ones where every millisecond counts, and the last thing you need is a bulky suit slowing you down. Engineered for high-performance drivers who demand lightweight fireproof protection, this suit is designed with cutting-edge materials that keep you cool, comfortable, and focused on the checkered flag. Whether you're battling for position in an endurance race or carving up a track day, the Tecnica Super Light gives you the confidence to push your limits without compromising safety. Why You’ll Love It Ultra-Lightweight Fireproof Protection – Made with advanced 2-layer (2L) inner compound technology, featuring a soft knitted fabric quilted with meta-aramid non-woven fabric. Translation? You’re wrapped in fire-resistant safety without feeling like you’re wearing a medieval suit of armor. Ergonomic, Race-Ready Fit – Bielastic inserts (fancy talk for ultra-stretchy panels) strategically placed to provide maximum flexibility where you need it most. That means a tailored, second-skin fit that won’t restrict your movements when you’re heel-toeing or sawing at the wheel. Stay Cool Under Pressure – Breathable inserts under the arms and at the sides let fresh air circulate, preventing that dreaded “hot suit sauna” effect after a few laps. Smooth Operator – Ultraflat, anti-rubbing seams with fishbone outside top stitching reduce chafing, because the only friction you should be feeling is between your tires and the tarmac. Race-Ready Style – Contrast color details on the pockets, inner collar, and suit edges ensure you look as fast as you drive. Bonus points if it matches your livery. OMP Technica Super Light Race Suit Tech Specifications & Features Homologation: FIA 8856-2018 Approved (because safety always comes first) Material: Lightweight 2L inner compound with soft knitted meta-aramid fabric Stretch Panels: Bielastic inserts for an ergonomic fit Cooling Zones: Breathable panels at sides and underarms Seam Design: Ultraflat anti-rubbing seams with fishbone outside top stitching Fit: Pre-curved arms and legs for natural driving position Weight: Featherlight compared to traditional suits OMP TECNICA SUPER LIGHT DRIVER RACE SUIT FAQs Q: Is the OMP Tecnica Super Light suitable for endurance racing?A: Absolutely! It’s built for comfort, breathability, and all-day wearability, so whether you’re doing a 20-minute sprint or a 24-hour endurance race, you’ll stay comfortable. Q: How does the fit compare to other OMP suits?A: It has a tailored, athletic fit, thanks to the stretch panels. If you’re between sizes, we recommend sizing up for a little extra room. Q: Can I wash my race suit?A: Yes, but hand wash with cold water and mild detergent. Don’t toss it in with your gym clothes unless you like the idea of ruining a premium suit. Q: How fire-resistant is this suit?A: It meets FIA 8856-2018 standards, which means it’s built to withstand extreme heat and flames. But let’s hope you never have to test that in action. Ready to Race? Your competitors won’t know what hit them when you show up looking this sharp, feeling this comfortable, and pushing the limits without distraction. Whether you’re shaving tenths off your lap times or chasing down a podium finish, the OMP Tecnica Super Light Driver Race Suit is your ultimate performance upgrade. Don’t wait—gear up and go full throttle! Order yours today! OMP TECNICA SUPER LIGHT DRIVER RACE SUIT SIZE CHART