Club Benefits

Garmin Catalyst Cage Mount w/ Low-Profile Magnet Compatible with RAM mount parts This cage mount cradle for the Garmin Catalyst driving performance optimizer provides a secure fit with quick and easy one-handed attachment and removal of the Catalyst from the cradle. This mounting kit includes a 2.5” (64mm) round base with AMPS hole pattern, locking double socket arm and diamond base adapter that connects to the cage mount cradle. The Garmin Catalyst Cage Mount includes a low-profile magnetic mount that replaces the magnetic mount that ships with the Catalyst. (The Catalyst magnetic mount does not fit in this cage mount cradle.) This mount has a ball joint size of 1.0” (25.4 mm). In the Box: Cage with assembly hardware Low-profile magnetic mount 2.5” round base with AMPS hole pattern Locking double socket arm Diamond base adapter that connects to the cage mount cradle Note: This is not designed as a roll cage mount.

AMT Ultra-Low Seat Mount For Corvette C5 Through C8 Sub Strap Mount Included The Best Way to Put Proper Seats in Your Corvette Throughout the years, the iconic Corvette has been equipped from the factory with many great features. Unfortunately, the seats aren't one of them. Those Corvette drivers who have added a proper racing seat to their Corvette often say it's the most important mod they've made to increase their track-day enjoyment and safety. However, a proper racing seat should be mounted from the side on fixed mounts, not using the OEM seat hardware. As a result, headroom becomes a concern with any racing seat in a Corvette, but AMT Motorsports has effectively eliminated that concern with the Ultra-Low Seat Mount. The Benefit of Innovative Design Countless development hours were spent making the Ultra-Low Seat Mount the best available for the Corvette. (The only way to get your seat lower in your car is to cut a hole in it!) The bottom of the seat can literally touch the floor in your Corvette. By machining a perfect hex in the mounts to accept the mounting bolts for the side brackets, AMT maximizes seat clearance. This machined hex also removes an extra wrench (and a whole lot of headache) from the install process. These seat mounts are machined from 6061-T6 extruded aluminum. Rather than allow the side brackets to only sit on bolts, AMT machines the brackets so there's a perfect mechanical interface with the bottom and side of each floor mount, increasing stiffness and strength. Included with every mount are studs and hardware to allow the mount to be bolted using the factory Corvette seat studs. Sub Strap Bar Included Finally, there's a movable cross bar to accept five- and six-point sub straps. This sub-strap bar is bolted to the floor mounts with flat head screws, and there are two more holes in the cross bar in case your sanctioning body requires you to bolt the bar through the floor. Two eye-bolts are included with the cross bar. We don't recommend using a different sub-strap bar with the AMT mount since you'll need to modify either the mount or the sub-strap bar to get it to fit. Lifetime Guaranteed Quality As with everything AMT makes, these mounts and sub-strap bars are proudly 100% made in the USA. If any part of the mount fails for any reason, AMT Motorsport will replace the offending part free of charge.

CMS Fire Extinguisher Decal Our CMS Fire Extinguisher Decal meets the standards of NASA, SCCA and IMSA for marking your fire system actuator location. 3" diameter Die-cut vinyl decal

Trac-Com Foam Earbuds For the purpose of hygiene and safety, this product is not eligible for return. Experience professional style communication while racing with Trac-Com Foam Earbuds. These earbuds are designed specifically for racers, providing clear and comfortable hearing during intense races. When paired with the Trac-Com Pro Helmet Kit, these foam earbuds offer top-notch communication capabilities, allowing you to stay connected with your team and receive important instructions without any distractions. Trac-Com Foam Earbud Features Structured for optimal fit and comfort Clear and crisp sound quality Compatible with Trac-Com Pro Helmet Kit Don't let poor communication hinder your performance on the track. Upgrade to Trac-Com Foam Earbuds and experience the difference in your racing experience. Order now and take your racing game to the next level!

Stand21 Porsche Motorsport Helmet & HNR Bag Officially-Licensed Porsche Motorsport helmet and head and neck restraint carry bag. Constructed from durable tear- and puncture-resistant polyester, this premium Porsche Motorsport logo bag safely carries one helmet plus one or two head-and-neck restraints (depending on the size/model). Lined in soft material with reinforced seams for durability, there's no better way for the Porsche racing enthusiast to tote helmet and HANS.

36-Inch Stilo to Chatterbox 3.5mm Helmet Cable This cable can be used to connect several types of devices to your Stilo helmet. Includes 3.5mm (1/8") right angle 4C male connector on one end and Stilo 4C male connector on the other. Made in the USA from thin ROHS-compliant cable, durability tested for the ultimate in strength and reliability. Stilo to Chatterbox 3.5mm Helmet Cable Details: Manufacturer: RaceCom Manufacturer part number: R CB STILO36 Connects to Chatterbox Tandem Pro 2, Chatterbox DUO Connects to any cell phone with a 3.5mm (1/8") female headphone jack

Bell M8 Sport Racing Helmet – Snell SA2025 Certified The Bell M8 Sport Racing Helmet SA2025 combines classic Bell Racing design, outstanding visibility, superior ventilation, and dependable motorsport protection in a versatile full-face helmet built for drivers of all experience levels. Designed for road racing, endurance racing, club competition, HPDE, and track-day applications, the Bell M8 Sport features a lightweight composite shell, advanced multi-density impact liner, and an exceptionally large eyeport that provides an expanded field of vision. Certified to Snell SA2025, the M8 Sport delivers current-generation automotive racing helmet protection with the comfort and functionality drivers expect from Bell Racing. Its spacious eyeport is especially beneficial for drivers who wear eyeglasses, while the direct-flow chin bar ventilation and manually adjustable upper air intakes help maintain comfort during demanding driving sessions. With integrated channels for optional communications and hydration equipment, factory-installed M6 FHR mounting terminals, and Bell's SRV-8 shield system, the M8 Sport provides exceptional versatility at an accessible price. Bell M8 Sport SA2025 Helmet Key Features Snell SA2025 Certified: Meets the current Snell automotive racing helmet safety standard. Lightweight Composite Shell: Designed to deliver durable protection while maintaining comfortable weight. Advanced Multi-Density Impact Liner: Multi-piece energy-absorbing construction engineered for impact performance. Extra-Large Eyeport: Provides exceptional peripheral visibility and additional space for eyeglasses. Direct-Flow Chin Bar Ventilation: Channels incoming air through the front of the helmet. Adjustable Upper Air Intakes: Manual lever vents can be opened or closed according to driver preference. Integrated Communication Channels: Built-in facepiece routing provisions accommodate compatible radio equipment. Hydration System Ready: Designed for compatible optional drinking tube installations. Bell SRV-8 Shield System: Uses compatible SRV-8 racing shields and SRV-1 pivot hardware. Synthetic Rubber Eyeport Gasket: Helps reduce dust, dirt, and water entering around the shield. Factory-Installed M6 Terminals: Provides mounting points for approved HANS and FHR anchors. Extended Helmet Size Range: Offers one of Bell Racing's broadest size selections. Fire-Resistant Interior: Dark Grey high-strength, high-comfort FR fabric. Optional Interior Colors: Selected alternative colors available through compatible manufacturer configurations. Optional Racing Accessories: Compatible shields, tear-offs, spoilers, and ventilation accessories available separately. Two Exterior Colors: Gloss White and Matte Black. Extra-Large Eyeport for Outstanding Driver Visibility One of the defining features of the Bell M8 Sport is its exceptionally large eyeport. The expanded opening provides a wide field of vision, allowing drivers to better monitor surrounding traffic, mirrors, corner workers, and cockpit instruments. Compared with helmets featuring narrower racing eyeports, the M8 Sport provides additional visual space that can be particularly useful in closed-cockpit race cars and during wheel-to-wheel competition. The large eyeport also makes the M8 Sport an excellent option for drivers who wear prescription eyeglasses while racing. For drivers who prioritize visibility and a less restrictive viewing area, the Bell M8 Sport is one of the most versatile full-face helmets in Bell's Sport Series. Designed for Drivers Who Wear Eyeglasses Finding a racing helmet that comfortably accommodates eyeglasses can be challenging. The Bell M8 Sport addresses this concern with a larger-than-average eyeport that provides additional clearance for many eyewear styles. This design helps drivers put on and remove eyeglasses while wearing the helmet and provides an expanded viewing area during driving. Eyeglass compatibility depends on the shape and size of the frames, so drivers should test their glasses with the helmet whenever possible. For racers requiring prescription eyewear, the M8 Sport offers a practical combination of comfort, visibility, and motorsport protection. Snell SA2025 Certified Racing Protection The Bell M8 Sport is certified to Snell SA2025, the current Snell automotive racing helmet standard. The certification establishes testing requirements for impact protection and other protective characteristics appropriate to automotive motorsport. The M8 Sport is suitable for qualifying road racing, club racing, time trial, driving school, and track-day applications that accept Snell SA2025 certification. Important: Bell lists the M8 Sport with Snell SA2025 certification. FIA 8859 homologation is not specified for this model. Always verify the requirements of your racing organization before purchasing. Lightweight Composite Shell Construction The Bell M8 Sport features a lightweight composite outer shell engineered to provide structural strength and reliable protection without unnecessary weight. The composite construction works with the helmet's advanced multi-density impact liner to help absorb and distribute impact energy. This construction makes the M8 Sport an attractive alternative to more expensive full-carbon racing helmets while maintaining the protection required by its Snell SA2025 certification. For drivers participating in extended track sessions, a comfortable helmet with an effective fit can help reduce fatigue and improve concentration. Advanced Multi-Density Impact Liner Inside the Bell M8 Sport is an advanced multi-density, multi-piece impact liner designed to maximize energy absorption and impact performance. The protective liner works together with the composite shell to manage impact forces during a motorsport incident. A properly fitted helmet is essential for the liner and shell to function as intended. The helmet should remain securely positioned around the head without excessive movement or uncomfortable pressure points. Superior Ventilation With Adjustable Air Intakes The Bell M8 Sport incorporates a versatile ventilation system designed to improve airflow and driver comfort. Direct-flow front chin bar vents help introduce cooling air into the helmet, while upper intake vents provide additional ventilation. The upper air intakes feature manually operated levers that allow drivers to open or close the ventilation openings depending on the conditions. These adjustments are useful during changing weather, cool morning sessions, and warm-weather endurance events. The adjustable ventilation arrangement makes the M8 Sport adaptable to different racing environments without requiring a permanent modification to the helmet. Bell SRV-8 Racing Shield and SRV-1 Pivot System The Bell M8 Sport uses the Bell SRV-8 shield system with compatible SRV-1 pivot hardware. The large shield complements the helmet's oversized eyeport, providing excellent visibility through the front opening. Replacement SRV-8 shields are available separately in selected finishes and configurations, allowing drivers to tailor their setup to different lighting conditions. Compatible tear-off films can also be installed to help manage dirt, rubber debris, and other contaminants during racing. The SRV-1 pivot system provides the mounting hardware required for compatible Bell racing shields. Always use approved replacement shields and hardware designed specifically for the Bell M8 Sport. Synthetic Rubber Gasket for Dirt and Water Resistance The Bell M8 Sport incorporates a synthetic rubber gasket around the shield opening. The gasket helps create a seal between the helmet shell and the shield when properly closed. This design helps reduce dirt, dust, and water entering around the eyeport during changing track conditions. Regular inspection of the gasket and shield hardware helps maintain proper operation and visibility. Integrated Racing Radio and Communication Compatibility The Bell M8 Sport includes integrated channels within the facepiece to accommodate compatible communications equipment. These channels provide routing options for selected racing radio systems and communication accessories. Communication compatibility is particularly useful for endurance racing, club racing, and other motorsport disciplines where drivers rely on instructions from the pit crew. The integrated routing provisions help simplify accessory installation without requiring unnecessary modifications to the protective helmet shell. Note: Radio systems, microphones, speakers, and communication equipment are sold separately. Hydration System Compatibility for Endurance Racing Extended track sessions and endurance racing can create demanding conditions for drivers. The Bell M8 Sport features integrated facepiece channels that allow compatible hydration equipment to be routed through the helmet. Drivers can install suitable drinking tubes and hydration accessories to support fluid intake during extended driving sessions. The routing options provide additional flexibility when configuring the helmet around a specific race car and driver setup. Important: Hydration equipment is optional and is not included with the standard M8 Sport helmet. Factory-Installed M6 HANS and FHR Mounting Terminals The Bell M8 Sport comes equipped with factory-installed M6 threaded terminals for compatible frontal head restraint anchors. These mounting provisions allow approved HANS/FHR anchor hardware to be installed without modifying the protective shell. The system supports use with compatible head-and-neck restraint equipment required by many motorsport sanctioning organizations. Important: The M6 mounting terminals are included, but HANS/FHR anchor clips are sold separately. Always use approved anchor components and follow the manufacturer's installation instructions. One of Bell Racing's Widest Helmet Size Ranges The Bell M8 Sport offers one of the broadest helmet size ranges available in the Bell Racing product lineup. Its expanded size selection makes the M8 Sport an excellent option for drivers who have difficulty finding a properly fitted helmet in conventional size ranges. Bell offers the M8 Sport in manufacturer size ranges starting at 54-55 and extending through 67-68, subject to inventory availability. To select the correct size, measure the circumference of your head around the widest point, approximately one inch above your eyebrows. Take several measurements to ensure accuracy and compare the results with Bell's official helmet sizing recommendations. Helmet fit should be snug and secure without creating uncomfortable pressure points. A professional fitting is recommended whenever possible. Fire-Resistant Interior and Comfort Features The Bell M8 Sport features a Dark Grey high-strength, high-comfort fire-resistant interior designed for competitive motorsport use. The interior provides supportive contact around the head while maintaining comfort throughout demanding track sessions. Bell also offers selected alternative interior color configurations, including Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink, and Orange. Alternative interior configurations may require special ordering and are subject to manufacturer availability. Ideal for Road Racing, HPDE and Endurance Competition The Bell M8 Sport is designed to accommodate a wide variety of motorsport applications. Its combination of visibility, ventilation, accessory compatibility, and extended sizing makes it suitable for drivers participating in: Road Racing Club Racing GT and Touring Car Racing Endurance Racing High-Performance Driving Events Track Days Time Trials Driving Schools Autocross Events Requiring SA-Rated Helmets Event eligibility depends on the helmet certification requirements of the specific organization or series. Bell M8 Sport SA2025 Technical Specifications Manufacturer: Bell Racing Helmets Model: M8 Sport Series: Bell Sport Series Helmet Type: Full-Face Auto Racing Helmet Certification: Snell SA2025 Shell Material: Lightweight Composite Impact Liner: Advanced Multi-Density, Multi-Piece Construction Exterior Colors: Gloss White and Matte Black Standard Interior: Dark Grey High-Strength, High-Comfort FR Fabric Alternative Interior Colors: Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink, and Orange Eyeport: Extra-Large Eyeport for Enhanced Visibility Eyeglass Friendly: Yes, Subject to Eyewear Fit Ventilation: Direct-Flow Chin Bar and Upper Adjustable Air Intakes Upper Vent Control: Manual Open/Close Levers Shield System: Bell SRV-8 Shield Pivot Kit: Bell SRV-1 Eyeport Gasket: Synthetic Rubber Communication Ready: Yes, With Optional Equipment Hydration Compatible: Yes, With Optional Equipment FHR Mounting: Factory-Installed M6 Terminals HANS/FHR Anchor Clips: Sold Separately Manufacturer Size Ranges: 54-55, 55-56, 57-58, 58-59, 60-61, 61-61+, 63-64, 65-66, 67-68 Primary Applications: Road Racing, Club Racing, Endurance Racing, HPDE, Time Trials, and Track Days Quantity: Sold Individually Compatible Bell M8 Sport Racing Helmet Accessories The Bell M8 Sport supports a selection of genuine Bell Racing accessories for enhanced visibility, comfort, and functionality. Bell SRV-8 Replacement Helmet Shields Bell SRV-8 Double Screen Anti-Fog Replacement Shields Bell SRV-1 Shield Pivot Kits Compatible Racing Optics Tear-Off Films Bell HANS/FHR Anchor Clip Sets Compatible Bell Rear Racing Spoilers Selected Forced-Air Ventilation Accessories Racing Communication Equipment Driver Hydration Accessories Protective Racing Helmet Bags Always verify accessory compatibility with the Bell M8 Sport SA2025 before ordering. Bell M.8 Helmet SA2025 Sizing Chart  Bell M8 Sport Helmet Care and Maintenance Proper care and routine inspection help maintain the performance, comfort, and condition of your Bell M8 Sport racing helmet. Exterior Care: Bell racing helmets use a durable polyurethane exterior coating designed to resist scratching. Clean the shell with a soft microfiber cloth and appropriate products suitable for automotive finishes. Avoid solvent-based or abrasive cleaners. Interior Care: Use mild soap and water with a clean cloth to gently hand-clean the interior fit padding according to Bell Racing's instructions. Drying: Allow the helmet to dry thoroughly after exposure to moisture or perspiration before placing it into storage. Shield Care: Clean the shield with approved visor-safe products and inspect for cracks, scratches, or damaged pivot hardware. Ventilation Maintenance: Inspect the chin bar and adjustable upper vents for dirt, debris, or damaged operating mechanisms. Hardware Inspection: Check the chin strap, shield pivots, and installed FHR anchors before every driving event. Storage: Store the helmet in a clean, cool, dry environment away from direct sunlight, excessive heat, and chemical exposure. Bell M8 Sport SA2025 Helmet FAQs Is the Bell M8 Sport Snell SA2025 certified? Yes. The current Bell M8 Sport carries Snell SA2025 certification for applicable automotive motorsport applications. Is the M8 Sport FIA 8859 certified? Bell lists the M8 Sport SA2025 with Snell certification. FIA 8859 homologation is not specified for this model. What makes the Bell M8 Sport different from other racing helmets? The M8 Sport features an exceptionally large eyeport, versatile ventilation, and one of Bell Racing's broadest helmet size ranges. Is the Bell M8 Sport good for drivers who wear glasses? Yes. The extra-large eyeport provides additional clearance for many eyeglass styles, although actual compatibility depends on the frames and individual fit. What is the Bell M8 Sport shell made from? The helmet uses lightweight composite shell construction. Can I adjust the helmet ventilation? Yes. The upper intake vents feature manual levers that allow drivers to open or close the ventilation openings. What shield fits the Bell M8 Sport? The M8 Sport uses Bell SRV-8 replacement shields and compatible SRV-1 pivot hardware. Can I add tear-offs to the shield? Yes. Compatible tear-off film systems are available for the Bell SRV-8 shield. Does the Bell M8 Sport include HANS anchors? The helmet includes M6 threaded mounting terminals. Compatible HANS/FHR anchor clips are sold separately. Can I install a racing radio system? Yes. Integrated facepiece channels provide routing options for compatible optional communication equipment. Can I install a drink tube? Yes. The M8 Sport includes provisions for compatible driver hydration systems. What sizes are available? Bell offers nine manufacturer size ranges from 54-55 through 67-68, subject to inventory availability. What colors are available? The Bell M8 Sport is offered in Gloss White and Matte Black. What interior comes standard? The standard interior is Dark Grey high-strength, high-comfort fire-resistant fabric. Is the M8 Sport suitable for endurance racing? Yes. Its extra-large eyeport, ventilation, and optional communication and hydration provisions make it well suited for endurance racing when Snell SA2025 certification is accepted. What is the difference between the M8 Sport and M8 Ultra? The M8 Sport features a lightweight composite shell and Sport Series interior, while the M8 Ultra uses carbon shell construction and offers a higher-end configuration. Is the M8 Sport suitable for beginners? Yes. Its versatile design, affordable price, and broad size range make it an excellent option for both entry-level and experienced drivers. Exceptional Visibility and Value With the Bell M8 Sport SA2025 The Bell M8 Sport Racing Helmet SA2025 delivers outstanding visibility, dependable protection, versatile ventilation, and broad sizing options in a classic Bell Racing design. With its lightweight composite shell, Snell SA2025 certification, oversized eyeport, adjustable air intakes, SRV-8 shield system, and integrated provisions for optional communications and hydration, the M8 Sport offers the features serious drivers need without premium carbon helmet pricing. Choose the Bell M8 Sport SA2025 for an exceptional combination of comfort, visibility, versatility, and race-ready value.

OMP FIRST-S Racing Driver Suit The OMP FIRST-S Racing Driver Suit is a revised entry-level FIA-homologated racing suit designed for drivers who want dependable protection, comfort, and classic OMP styling at an approachable price point. Updated with lightweight fabrics and improved construction, the FIRST-S delivers the safety and mobility needed for track days, club racing, HPDE, and competitive motorsport. Certified to the FIA 8856-2018 homologation standard, the OMP FIRST-S uses a two-layer construction with a durable fire-retardant exterior and a soft knitted inner layer for improved comfort during long sessions in the car. Ultra-flat internal seams help reduce rubbing, while the elastic knitted lower-back insert improves flexibility and driver comfort in a seated driving position. Lightweight Two-Layer FIA Protection The OMP FIRST-S Racing Suit is built around a lightweight and breathable two-layer design. At 385 g/m², this updated version is lighter than previous FIRST-S models while still maintaining the durability and protective performance drivers expect from OMP. Improved Comfort and Mobility Full-floating arms with elastic bellows allow greater freedom of movement behind the wheel, helping reduce resistance while steering, shifting, and entering or exiting the car. The modern fishbone quilting pattern is designed to better match the driver's ergonomics in a seated racing position, giving the suit a clean professional look while improving overall comfort. OMP FIRST-S Racing Driver Suit Features FIA 8856-2018 homologated racing suit Lightweight and breathable two-layer construction Durable fire-retardant outer material Soft knitted inner layer for driver comfort Full-floating arms for improved mobility Elastic bellows for reduced restriction while driving Ultra-flat anti-rubbing internal seams Elastic knitted lower-back insert for comfort and flexibility Modern fishbone quilting pattern Classic OMP fit and styling Weight: 385 g/m² Why Choose the OMP FIRST-S Racing Driver Suit? The OMP FIRST-S is an excellent choice for drivers looking for an FIA 8856-2018 race suit that balances safety, comfort, and value. With its lighter construction, improved mobility, and trusted OMP build quality, the FIRST-S is a strong option for racers moving into FIA-rated gear or anyone looking to upgrade from older safety equipment. OMP FIRST-S Racing Driver Suit FAQs Is the OMP FIRST-S Racing Driver Suit FIA approved?Yes. The OMP FIRST-S Racing Driver Suit is certified to the FIA 8856-2018 homologation standard. How many layers does the OMP FIRST-S suit have?The OMP FIRST-S uses a lightweight two-layer construction with a fire-retardant outer shell and soft knitted inner layer. Is the OMP FIRST-S lighter than the previous version?Yes. The revised FIRST-S uses updated lightweight fabrics and weighs 385 g/m². Does the OMP FIRST-S have floating arms?Yes. The suit features full-floating arms with elastic bellows for improved range of motion while driving. Who is the OMP FIRST-S Racing Driver Suit best for?The FIRST-S is ideal for drivers who need an FIA 8856-2018 homologated suit with  comfortable two-layer protection, classic styling, and strong value. OMP FIRST-S Driver Race Suit Sizing Chart

Allstar Performance SFI 45.1 Roll Bar Padding Allstar Performance SFI 45.1 mini roll bar padding is ideal for tight areas in a race car when standard padding is too large. It features a unique, compact design to provide driver protection to specific areas and meets SFI 45.1 specifications. Allstar Performance Roll Bar Padding is easy to install, with a special peel-and-stick backing giving you a secure fit on roll bars ranging from  1.25 inches to 1.75 inches in diameter. Allstar Performance Roll Bar Padding Details: Manufacturer: Allstar Performance Thickness: 0.75 inches Length: sold in individual 36-inch lengths Maximum Bar Diameter: 1.75 inches Minimum Bar Diameter: 1.25 inches Certification: SFI 45.1 Attachment: attaches to roll bar with adhesive backing

OMP Racing Seat Slider Easily adjust your racing seat to the optimal position with an OMP racing seat slider. OMP seat sliders are best for any OMP seat application. They're designed to allow the driver to adjust the seat position with precision, giving you a position that's completely custom to you. OMP seat slider sets employ a double locking mechanism for increased strength and safety. This slider is not FIA approved.

Sparco QRT-R Side Mount Seat Brackets Sparco QRT-R side mounts are specifically designed for the QRT-R and other QRT performance seats. These QRT side mounts are designed for the unique bottom shape of QRT seats. Multiple side holes allow your QRT seat to be mounted low in the vehicle and with the proper amount of recline or rake. Available in black. Sparco QRT-R Side Mount Details Manufacturer: Sparco Manufacturer part no.: 600QRT, 600QRTAL Material: steel or aluminum Weight: 6.5 lbs per set (steel), 3.2 lbs per set (aluminum) Designed for unique QRT bottom shell shape Allows for low mounting in vehicle and proper recline or rake

Sparco Advanced Thunder Kart Racing Suit FIA 8877-2022 Certified Safety, Comfort and Style The Sparco Thunder Advanced Kart Racing Suit delivers professional-grade protection, bold styling, and all-day comfort for racers at every level. Certified to the latest FIA 8877-2022 Grade 1 homologation, the Thunder Advanced provides the safety demanded by serious competitors, while remaining breathable and mobile enough for long, grueling sessions on the track. Constructed from lightweight, abrasion-resistant Cordura, this suit includes strategic stretch panels, mesh inserts, and pre-curved arms for maximum freedom of movement. Internally, soft cotton terry lining enhances comfort, while underarm and thigh vents help regulate body temperature during intense races. The Thunder’s ergonomic fit and half-floating sleeves reduce fatigue and let you focus on your performance. Make A Statement at the Kart Track The Sparco Thunder Advanced doesn’t just perform—it also makes a statement. Now available in seven new colorways, it features a lowered collar, contrast accents, and Sparco’s signature epaulettes. Side pockets and an adjustable belt add practical touches, while the elasticated back panel ensures a tailored fit in and out of the kart. Offered at an exceptional value, the Thunder Advanced brings premium features typically found in higher-end suits. Whether you're a beginner or a championship contender, this FIA-certified suit is a reliable investment in performance and protection. Available now at Competition Motorsport, with expert sizing support and fast shipping. Features and Benefits of the Sparco Thunder Advanced Kart Suit FIA 8877-2022 Grade 1 Approval: This suit meets stringent FIA standards, ensuring you have reliable protection during races, giving you peace of mind when you're on the track so you can focus on what matters most, winning. Two-Layer Abrasion-Resistant Cordura Material: The durable fabric is designed to keep you safe so you can focus on performance. Large Rear Stretch Panel: The stretch panel at the back enhances comfort and fit in the seated position, allowing for better mobility and less restriction while driving. Perforated Stretch Panels: Located in the armpits and inner leg, these panels improve breathability and cooling, helping you maintain optimal body temperature during intense races. Semi-Floating Sleeves and Pre-Curved Arms: These features improve the overall fit of the suit, allowing for greater freedom of movement and enhanced comfort, particularly in a driving position. Ribbed Neck and Concealed Zip: The ribbed neck offers added comfort while the concealed zip provides a sleek look, contributing to a professional appearance on the track. Sparco Thunder Advanced Karting Suit Technology Elasticized back panel Lowered collar Breathable inserts on inner thigh and underarm Belt Side pockets FIA 8877-2022 Grade 1 approved Sparco Thunder Advanced Karting Suit Sizing Frequently Asked Questions (FAQ) – Sparco Thunder Advanced Kart Racing Suit What is the difference between a kart suit and an auto racing suit?A kart racing suit like the Sparco Advanced Thunder is specifically engineered for karting and focuses on abrasion resistance rather than fire protection. Since karting involves low fire risk, FIA kart suits like this one are not fire-retardant. In contrast, auto racing suits are constructed with flame-resistant materials and carry FIA or SFI fire certifications for use in motorsports involving fuel and fire hazards. Where are Sparco suits made?Sparco kart racing suits, including the Advanced Thunder, are proudly designed and manufactured in Italy. With a reputation built on precision engineering, Italian craftsmanship, and motorsport innovation, Sparco remains one of the most trusted names in racing gear across the globe. What is the Sparco Thunder Advanced kart racing suit?The Sparco Advanced Thunder is a high-performance FIA 8877-2022 Grade 1 kart suit designed for competitive kart racers seeking exceptional comfort, protection, and mobility. With a modern ergonomic cut, breathable mesh panels, and lightweight multi-layer construction, it's built to meet the demands of high-level racing while maintaining full FIA compliance. What is the Sparco Thunder Advanced made of?This lightweight kart suit is crafted with abrasion-resistant outer layers, internal mesh lining for breathability, and elastic stretch panels for optimal flexibility. The materials are selected to reduce fatigue, increase airflow, and provide a race-ready fit without compromising safety. Is the Sparco Thunder Advanced FIA certified?Yes. The Advanced Thunder is homologated to the latest FIA 8877-2022 Grade 1 kart suit standard, ensuring it meets the safety and durability requirements for national and international karting competitions. It’s fully approved for FIA-sanctioned events worldwide. Is this a lightweight kart suit?Yes. The Sparco Advanced Thunder is a true lightweight kart suit, designed to deliver maximum performance with reduced bulk. Its breathable and flexible design helps drivers stay cool and agile throughout intense race sessions. Who is the Sparco Thunder Advanced ideal for?This suit is ideal for serious kart racers of all levels—whether you're competing in junior, senior, or master classes. It’s designed for drivers who need a race-legal suit that combines FIA-certified protection, high-performance materials, and lasting comfort for extended use on track. Why choose Sparco for karting gear?Sparco kart racing suits are known for blending high-performance materials with race-proven functionality and Italian style. With a legacy rooted in professional motorsports, Sparco continues to deliver premium suits for drivers who demand the very best in safety, comfort, and design.

CMS Performance Bolt-In Harness Bar This Harness Bar Fits The Following Cars: Porsche Boxster Spyder RS (2023-25) Porsche Cayman (2014-25) Porsche Cayman S (2014-25) Porsche Cayman GTS (2015-25) Porsche Cayman GT4 (2016-22) Porsche Cayman GT4 RS (2022-25) Porsche Boxster (2013-25) Porsche Boxster S (2013-25) Porsche Boxster GTS (2013-25) High Strength Bolt-In Harness Bar for the Porsche Cayman & Boxster Expertly crafted from high-strength, 1.5" fully TIG welded Docol R8 Advanced High-Strength Steel tubing, the CMS Performance Harness Bar is the strongest, lightest, and safest bolt-in harness bar on the market for your Porsche. It gives you the perfect attachment for your five- or six-point harness shoulder straps without having to install a full roll bar. The CMS Performance Harness Bar is designed to place your racing harness shoulder straps at the proper angle (0° to -20°) and distance (eight inches or less) so the driver and passenger racing harnesses function properly. There is no need to cut your Porsche's carpeted central hump, a design unique to CMS Performance that provides an ideal location for mounting an AiM SmartyCam. The CMS Performance Harness Bar also gives you full access to the engine cover. It mounts to the frame structure across the passenger compartment bulkhead, directly behind the seats. Click Here For Installation Instructions Engineered. Fabricated. Powder Coated. All Under One Roof. CMS Performance roll bars are manufactured in-house in the USA using premium Docol R8 steel, then powder coated in your choice of available finishes at no additional charge. With typical lead times of just two to three weeks, you spend less time waiting and more time driving. The Ultimate in Quality and Precision The CMS Performance Harness Bar is meticulously designed, fabricated, and fully TIG welded by CMS Performance master fabricators for unsurpassed integrity, fit, and finish. The harness bar comes standard in a smooth satin black powder coat to complement any interior. Or you can choose from any number of custom powder coat colors matched to most factory Porsche paint colors. To install the CMS Performance Harness Bar, some modification of your OEM interior trim will be required. CMS Performance offers precision-cut OEM Porsche trim as an option to ease installation and preserve your original interior pieces. CMS Performance Harness Bar Details 1.50″ x .120" Docol R8 Advanced High-Strength Steel No cutting of carpeted center hump preserves expensive OEM carpet CNC-cut mounting plates Designed, built and finished in the USA Allows full seat travel with any seat Easy to install with perfect fitment guaranteed Detailed installation instructions and all necessary hardware included

Stilo WRC Intercom Systems The Stilo WRC Series Intercom Systems were designed to be securely installed on the roll bar, where it's easy to reach and convenient to adjust. They plug directly into your Stilo helmet with the included IMSA cables for clear, pitch-perfect audio while on track. The WRC Series feature an automatic On/Off switch controlled through co-driver plug connection; no more starting races disconnected. WRC 03 The Stilo WRC 03 intercom is equipped with top-of-the-line WRC electronics. Designed for compatibility with Trophy Plus, WRC, and ST5 helmets, as well as WRC headsets. Amplify sound clarity with matched electronics. Runs on standard 9-volt battery, with optional car adapter for continuous power. WRC DES The WRC DES includes an advanced noise-canceling "extra filter" which effectively eliminates background noise to make driver/co-driver communications clearer than ever! Individual volume adjustment for each connected helmet. Nine-volt power supply standard (9V battery), with 12-volt available as option. Camera and/or radio connection is also possible with these units. DG-10 For more advanced communication needs, the DG-10 includes noise-cancellation as well as a Bluetooth connection for simplicity at its finest. Digital active noise cancellation with SDA filter Integrated Bluetooth for mobile phone connection Camera and radio connections Click here for our Connection Guide for the Stilo DG-10. DG-30 A fully digital communications platform engineered to deliver exceptional clarity, operational stability and comms redundancy in the harshest motorsport environments. Featuring digital active noise cancellation with Stilo’s SDA filter, the DG-30 intelligently reduces engine, wind, and drivetrain noise so driver and co-driver communication remains crisp and intelligible even at high speeds or in extremely loud cockpits. DG-30 Includes the following: Main unit with GSM module integrated Remote control panel External aerial Click here for our Connection Guide for the Stilo DG-30.

Sparco RW-10 Seamless Nomex Shirt The Sparco RW-10 line of Nomex undergarments is the lightest and most breathable on the market that is homologated to the new FIA 8856-2018 standard. When designing this new line of undergarments, Sparco studied the drivers seating position to ensure ultimate fit and comfort. The RW-10 features a fully seamless structure with ultra-soft stretchable material for a very comfortable fit. RW-10 shirts and underpants are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool treatment has an anti-bacterial effect. The RW-10 Undershirt is a seamless design with no seams for additional comfort. It is available in four sizes: X-Small, Small/Medium, Large/XL, and XXL. The RW-10 undershirt is a compression type fit, so if you prefer a looser fit you should choose one size larger than you normally wear. Available in Black, Grey, Navy, or White. Sparco RW-10 Nomex Shirt Technology Newest FIA rating, FIA 8856-2018 Seamless stretchable Nomex in key areas for mobility Designed for comfort in the driving position Minimal external seams increase driver comfort X-Cool Silver draws heat from the body surface to cool the driver X-Cool Silver has anti-bacterial effect

AiM Sports 712 to 719 Four-Pin Patch Cables Add the appropriate AiM Sports 712 to 719 4-Pin Extension Cables to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level! The AiM Sports 712 to 719 4-Pin Patch Cables have a female 4-pin 719 (plastic) connector at one end and a male 4-pin 712 (threaded) connector at the other to connect most analog automotive sensors to the MyChron3, XG-Log Auto Dash, AiM EVO4, or AiM EVO4s Data Logger. Available in 0.5 thru 4 Meter lengths. The AiM 712 to 719 Cable is Compatible With: MyChron Expansion AiM Data Hub Channel Expansion EVO4 Logger EVO4s Logger PART NUMBERS: V02PCB05BTXG – cable length: 0.5 meter (1.6 ft) V02PCB10BTXG – cable length: 1 meter (3.3 ft) V02PCB15BTXG – cable length: 1.5 meter (4.9 ft) V02PCB20BTXG – cable length: 2 meters (6.6 ft) V02PCB25BTXG – cable length: 2.5 meters (8.2 ft) V02PCB30BTXG – cable length: 3 meters (9.8 ft) V02PCB35BTXG – cable length: 3.5 meters (11.5 ft) V02PCB40BTXG – cable length: 4 meters (13.1 ft) V02PCB50BTXG – cable length: 5 meters (16.4 ft) Note: Cables typically take 3 to 5 business days to ship.