McLaren MP4-12C

D1-023 Girodisc McLaren Front Rings Keep your McLaren’s world-class braking performance sharp with Girodisc D1-023 380mm front replacement rings. These precision-engineered rotors are direct replacements for Girodisc two-piece systems and bolt to your existing aluminum hats using the supplied floating hardware kit. Each ring is machined from Girodisc’s proprietary high-carbon cast iron, offering exceptional thermal capacity, improved pedal feel, and consistent stopping power during both spirited road driving and track use. Vehicle Fitment Compatible with:• McLaren 12C / MP4-12C• McLaren 650S / 675LT• McLaren 540C / 570S / 570GT / 600LTNote: Designed exclusively for Girodisc 380mm two-piece front rotor systems. Not compatible with OEM carbon-ceramic or one-piece iron rotors. Features • Sold as a left/right pair with complete floating hardware kit• Direct replacements for Girodisc 380mm two-piece front rotors• CNC-machined from high-carbon cast iron for stability and heat control• Directional curved vanes optimize airflow for superior cooling• Maintains OEM brake bias, ABS, and traction control calibration• Precision-balanced for vibration-free operation• Designed exclusively for Girodisc aluminum hats Specifications • Diameter: 380 mm• Position: Front• Material: High-carbon cast iron• Mount type: Floating two-piece system• Includes: Two rotor rings and complete hardware kit• Sold/priced per pair Girodisc D1-023 McLaren 380mm Front Ring FAQs Can these be installed with factory McLaren rotor hats? No. The D1-023 rings are designed exclusively for Girodisc aluminum hats and are not compatible with OEM carbon-ceramic or iron rotors. Do these rings improve braking compared to OEM steel rotors? Yes. The floating two-piece design improves heat dissipation, reduces unsprung mass, and enhances braking consistency under heavy load. What brake pads pair best with these rotors? For street and occasional track driving, Ferodo DS2500 or Hawk HPS 5.0 offer excellent balance. For dedicated track use, Pagid RS29 or Carbotech XP12 pads provide high-temperature stability and fade resistance. What torque should I use for installation hardware? Torque all fasteners to 12 ft-lbs (16 Nm) with blue Loctite. After one full heat cycle, recheck torque to confirm proper float and secure alignment. Upgrade your McLaren’s braking system with Girodisc D1-023 380mm front replacement rings — engineered for peak performance, thermal control, and consistent braking feel lap after lap.

C3 Carbon McLaren MP4-12C/650S Carbon Fiber Coolant Tank Cover (Ribbed) FITMENT: McLaren MP4-12C (2012-2014) McLaren 650S (2015-2016) Add visual flair to your McLaren's engine bay with a new carbon fiber coolant tank cover from C3 Carbon. A direct replacement for the factory part on the McLaren MP4-12C or 650S, this beautifully finished and easy to install carbon fiber piece adds a bit of drama that reflects the McLaren's racing heritage. C3's autoclaved, pre-impregnated dry carbon fiber cover is engineered for a perfect fit and is finished flawlessly. C3 has matched the OEM McLaren 3K, 2x2 twill weave for a factory-original McLaren appearance. Choose between brilliant high-gloss or satin clear finishes. This part can also be purchased as part of a complete McLaren Engine Bay Carbon Package! FEATURES: Autoclaved pre-preg dry 3K carbon fiber with 2x2 twill weave matched to McLaren OEM carbon fiber Clear-coated with premium automotive urethane OEM-perfect fit Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Fiber Shift Paddles Enhance the beauty of your MP4-12C cockpit with C3 Carbon shift paddles. C3's autoclaved, pre-impregnated dry carbon cfiber shift paddles install easily and fit perfectly, bringing you the beauty of carbon fiber every time you drive your McLaren. C3 has matched the OEM McLaren 3K twill weave for a perfect original factory appearance. Easy installation using incredibly strong 3M VHB 5952 double-sided tape makes this a must-have for any 12C owner. All 2012-15 McLaren MP4-12C models Features Autoclaved pre-preg dry 3K carbon fiber with OEM McLaren-matched twill weave. Clear-coated with automotive urethane, hand polished to a mirror finish Precise fit without any modification Installs in minutes using 3M VHB (Very High Bond) double-sided tape Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.