Coolshirt
Coolshirt Safety-Pull Release Connectors
$45.00
Two female dry quick-disconnects for any Coolshirt system water line. These are designed to disconnect in an emergency by the force of the driver pulling away from the lines.
FEATURES
5/16" female connectors will work with your Coolshirt system (as well as some other cooling products)
Sold as a pair
Â
Hans
HANS Sport 3 Tether Kits
$59.95
HANS Sport 3 Tether Kits
Ensure the safety and functionality of your HANS Sport 3 with our replacement tether kits. Designed for use with Sliding tethers and post anchors, these kits allow you to easily swap out your existing tether for a longer or shorter one. In the event of an incident, it is crucial to have a reliable and secure tether in place, and our HANS Sport 3 Tether Kits provide just that. Made with high-quality materials, these kits are built to withstand the demands of competitive motorsports. Keep your HANS Sport 3 in top condition with our reliable and durable tether kits.
Sparco
Sparco X-Cool Recharge Kit
$40.00
Sparco X-Cool Recharge Kit
The easy-to-apply Sparco X-Cool Recharge Kit helps revive your Sparco fire suit or nomex underwear to it's original high-temperature performance. Simply add to your washing machine along with your performance apparel.Each kit can treat one Sparco fire suit or one complete set of Sparco nomex underwear (balaclava, shirt, pants and socks).
Racing Optics
Stilo Tearoff ST5 Thick 4mil
$39.95
Stilo ST5 Thick 4mil Tearoff Pack qty 12(4 Sleeves of 3)
Protect Your Stilo ST5 Helmet Shield from rocks, dirt, and debris with these 4 mil thick tearoffs. Measuring 4 mil thickness (the most popular thickness for open cockpit and harsh environment racers), it is intended for road racing and/or dirt track use. This package of 4 mil tear-offs are in 4 stacks of 3 per package (12 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches.
Stilo 4 mil Tearoff Pack Quantity 10 (4 Sleeves of 3) Details:
Manufacturer: Stilo
Manufacturer part numbers: 3459C
Thickness each: 4 mil
Gradient: Clear
Fits All Stilo ST5 Helmets: Yes
Fits All Stilo ST4F and Stilo ST4W Helmets: No
4 Stacks of 3 each
Note: This is the thicker of tearoffs (4 mil) for your Stilo ST5 series helmets. It is used primarily in Road Racing Open Cockpit or other harsh environment race tracks
Alpinestars
Alpinestars Engine Pit Gloves
$39.95
Alpinestars Engine Pit Gloves
The Engine Glove is a hybrid multi-material glove which offer high levels of comfort and protection. Soft, lightweight and flexible, the glove has mesh panels for optimum levels of breathability, while the tough synthetic suede leather palm means it is highly durable. It’s also reassuringly protective thanks to the strategically positioned TPR on the knuckles. Another neat feature is the conductive print on the palm and fingers which allows mechanics to operate a tablet while wearing the gloves.
KEY FEATURES
Advanced TPR knuckle insert offers impact protection without compromising dexterity.
Ergonomic stretch insert between thumb and palm and on backhand offers flexibility to vastly improve hand movement.
Sublimated, fade-resistant color on back of the hand for a distinctive look.
Synthetic suede thumb reinforcement for durability and seam reinforcement.
Touchscreen compatible fingertip for use with handheld devices.
Short cuff styling.
CONSTRUCTION
Lightweight, multi-material glove incorporating a stretch mesh and stretch fabric on the top of the hand.
Stretch mesh and stretch fabric offer comfort and cooling performance.
Synthetic suede palm with padding provides grip, durability and tactility.
Hook and loop grip cuff closure on the back of the hand for a precise fit.
Strategic 2mm foam padding on fingers for fit and comfort.
Sparco
Sparco Meca 3 Pit Gloves
$39.00
Sparco Meca 3 Pit Gloves
The back of the Sparco Meca 3 pit mechanic's glove is made from elasticized, printed, scuff resistant fabric. The palms are synthetic scuff resistant hide, giving you excellent dexterity and feel with reinforcements positioned between the thumb and index finger. Pads between the fingers provide excellent breathability and comfort. The Meca 3 has a velcro wrist strap for a secure, comfortable fit.
Stilo
Stilo ST5 Hydration Kit
$49.95
Stilo ST5 Helmet Hydration Kit
Hydration bite-valve kit designed specifically for the Stilo ST4 and ST5 helmet.
KIT INCLUDES:Â
(1) Male hydration connector
(1) Female hydration connector
(1) Hydration tube
(1) Bite valve
Coolshirt
Coolshirt Motorsports Drain Kit
$38.00
Coolshirt Motorsports Drain Kit
The Coolshirt motorsports drain kit is designed to make draining your shirt and/or cooler quickly and easily. The kit comes with two female connectors, one male connector, and roughly two feet of tubing.
To drain your garment just connect it to the the female connectors and hang the garment allowing it to gravity-drain. We recommend that you leave the female connectors in the shirt after it has drained for several hours to allow any excess moisture in the tubes to evaporate. If needed, you can blow a light stream or air (10psi or less) through the garment to aid in the draining process.
The male connector and tubing will allow you to plug into the cooler and pump the water out. We recommend that you leave the cooler lip open after pumping the cooler out to allow for any excess moisture to evaporate.
Stilo
Stilo ST5 Side Air Adapter Hose
$49.95
Stilo ST5 Side Air Adapter Hose
Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone.
This adapter hose allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet.
MUST BE USED IN CONJUCTION WITH SIDE AIR KIT YA0653.
Stilo
Stilo ST5 Earcup Set
$34.95
Stilo ST5 Earcup Set
Stilo passive noise attenuating removable earcups. Not for use with helmets equipped with built-in earcup communications. Can be used in conjunction with 3.5mm jack and in-ear buds, or without any communications installed.
FluidLogic
Maglock Air Hose
from $31.80
Maglock Air Hose
**Maglock Air hose side NOT included**
Maglock Air Hose is built to our exact specifications to ensure that you get the lightest, most flexible hose on the market today. The feedback from our test pilots ensures you that neck fatigue during use is greatly reduced, furthermore, this hose does not leverage or disconnect the Maglock Air in high G or high impact environments. Used by top motorsports athletes including all Andretti Indy cars, Ricky Stenhouse Jr. (NASCAR), Ricky Johnson (TT), and Guy Cosmo (IMSA). We highly recommend our hose to be paired with Maglock Air.
Chillout Systems
Chillout Systems 1.5 Liter Coolant Formula
$30.00
Chillout Systems 1.5 Liter Coolant Formula
This 1.5 liters of coolant will last a single racer an entire season!
Non-toxic and biodegradable coolant that circulates through your Chillout Systems cooler and cooling garments, keeping you cool and your cooler running in prime condition. Does not evaporate, greatly extending the amount of time between refilling your system.
Chillout cooling garments encase tubular veins within the material, covering a large surface area of the body to keep you cool, dry, and focused.
We suggest you replace the Chillout Coolant in your system at least once per race season. It takes less than two minutes and keeps your cooling system running in peak condition.
Bell
Bell Forced Air Low Profile Nozzle & Cover Plate (HP6/GT6 Helmet)
$29.95
Bell Helmets Forced-Air Nozzle for HP6/GT6 Helmet
This clear plastic Bell Helmets forced-air kit consists of the following:
(1) Forced-air low profile nozzle
(1) Cover plate
(2) Seal kits
Each seal kit contains two pieces of 20 x 80mm and two pieces of 20 x 120mm double-sided tape.
Molecule
Molecule Matte Helmet Care Kit
$29.95
Molecule Matte Helmet Care Kit
This specially-bundled kit from Competition Motorsport makes it easy and safe to keep your racing helmet in top condition, clean and fresh. The light-duty Matte Detailer spray is designed to keep your Matte helmet exterior shell clean. Safe to use on all finishes, including flat and matte. Refresher spray keeps the inside of your helmet clean, while Anti-Fog helps to keep the inside of your visor clear. Rain Repel is excellent at keeping the outside of your visor clear and making it easy to clean off debris, bugs, etc.
KIT INCLUDES:
(1) Helmet MATTE DETAILER 4 oz.
(1) Helmet REFRESHER 4 oz.
(1) Helmet RAIN REPEL 4 oz.
(1) Helmet ANTI-FOG 4 oz.
Alpinestars
Alpinestars KX v2 Karting Balaclava
$29.95
Alpinestars KX v2 Karting Balaclava
Alpinestars KX v2 Balaclava Summer is extremely lightweight and thin, while being incredibly soft to the touch for greatly enhanced comfort when wearing a full face helmet, and has extensive mesh panels on the rear for optimum levels of breathability.
Â
