Auto Racing Driver Safety Gear at CMS – Page 21

Chillout Systems Chillout Systems 3" Air Duct Plenum $48.00

Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system. The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED: 3" Air Duct Plenum

NecksGen Sparco Helmet kit AIR/SKY $45.00

Replacement hardwares for our Air Pro and Sky RF full face helmets Air/Sky Helmet Visor Fastener Kit by Sparco .This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship.Manufactured from industry-leading ... Rigorously tested to withstand years of abuse Built for maximum strength and endurance Designed and manufactured using innovative technologies

Sold out -31% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpinestars Alpinestars ZX v3 Nomex Socks $44.95 $64.95

Alpinestars ZX v3 Nomex Socks These nomex socks from Alpinestars' advanced ZX base layer series were developed with a compression design for enhanced performance. Lightweight and comfortable, these ZX v3 socks incorporate elastane fiber for comfort and freedom of movement. PROTECTION Certified to the new FIA 8856-2018 homologation standard.

HANS Sport 3 Tether Kits - Competition Motorsport

Hans HANS Sport 3 Tether Kits $59.95

HANS Sport 3 Tether Kits Ensure the safety and functionality of your HANS Sport 3 with our replacement tether kits. Designed for use with Sliding tethers and post anchors, these kits allow you to easily swap out your existing tether for a longer or shorter one. In the event of an incident, it is crucial to have a reliable and secure tether in place, and our HANS Sport 3 Tether Kits provide just that. Made with high-quality materials, these kits are built to withstand the demands of competitive motorsports. Keep your HANS Sport 3 in top condition with our reliable and durable tether kits.

sparco x-cool recharge kit 001157RECHARGE Image

Sparco Sparco X-Cool Recharge Kit $40.00

Sparco X-Cool Recharge Kit The easy-to-apply Sparco X-Cool Recharge Kit helps revive your Sparco fire suit or nomex underwear to it's original high-temperature performance. Simply add to your washing machine along with your performance apparel.Each kit can treat one Sparco fire suit or one complete set of Sparco nomex underwear (balaclava, shirt, pants and socks). SKU: 001157RECHARGE

Stilo Stilo Tearoff ST5 Thick 4mil $34.95

Stilo ST5 Thick 4mil Tearoff Pack qty 12 (4 Sleeves of 3) Protect Your Stilo ST5 Helmet Shield from rocks, dirt, and debris with these 4 mil thick tearoffs. Measuring 4 mil thickness (the most popular thickness for open cockpit and harsh environment racers), it is intended for road racing and/or dirt track use. This package of 4 mil tear-offs are in 4 stacks of 3 per package (12 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo 4 mil Tearoff Pack Quantity 10 (4 Sleeves of 3) Details: Manufacturer: Stilo Manufacturer part numbers: 3459C Thickness each: 4 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 4 Stacks of 3 each Note: This is the thicker of tearoffs (4 mil) for your Stilo ST5 series helmets. It is used primarily in Road Racing Open Cockpit or other harsh environment race tracks

Alpinestars Engine Pit Gloves - Competition Motorsport

Alpinestars Alpinestars Engine Pit Gloves $39.95

Alpinestars Engine Pit Gloves The Engine Glove is a hybrid multi-material glove which offer high levels of comfort and protection. Soft, lightweight and flexible, the glove has mesh panels for optimum levels of breathability, while the tough synthetic suede leather palm means it is highly durable. It’s also reassuringly protective thanks to the strategically positioned TPR on the knuckles. Another neat feature is the conductive print on the palm and fingers which allows mechanics to operate a tablet while wearing the gloves. ALPINESTARS ENGINE PIT GLOVE KEY FEATURES Advanced TPR knuckle insert offers impact protection without compromising dexterity. Ergonomic stretch insert between thumb and palm and on backhand offers flexibility to vastly improve hand movement. Sublimated, fade-resistant color on back of the hand for a distinctive look. Synthetic suede thumb reinforcement for durability and seam reinforcement. Touchscreen compatible fingertip for use with handheld devices. Short cuff styling. ALPINESTARS ENGINE PIT GLOVE CONSTRUCTION Lightweight, multi-material glove incorporating a stretch mesh and stretch fabric on the top of the hand. Stretch mesh and stretch fabric offer comfort and cooling performance. Synthetic suede palm with padding provides grip, durability and tactility. Hook and loop grip cuff closure on the back of the hand for a precise fit. Strategic 2mm foam padding on fingers for fit and comfort.

Sparco Sparco Meca 3 Pit Gloves $39.00

Sparco Meca 3 Pit Gloves The back of the Sparco Meca 3 pit mechanic's glove is made from elasticized, printed, scuff resistant fabric. The palms are synthetic scuff resistant hide, giving you excellent dexterity and feel with reinforcements positioned between the thumb and index finger. Pads between the fingers provide excellent breathability and comfort. The Meca 3 has a velcro wrist strap for a secure, comfortable fit.

Stilo Stilo ST5 Hydration Kit $49.95

Stilo ST5 Helmet Hydration Kit Hydration bite-valve kit designed specifically for the Stilo ST4 and ST5 helmet. STILO ST5 HYDRATION KIT INCLUDES: (1) Male hydration connector (1) Female hydration connector (1) Hydration tube (1) Bite valve

Stilo Stilo ST5 Side Air Adapter Hose $49.95

Stilo ST5 Side Air Adapter Hose Connects Standard Forced-Air To Stilo ST5 Side Air Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This adapter hose allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet. Must be used in conjunction with Stilo Side Air Kit YA0653. Stilo ST5 Side Air Adapter Hose SKU: YA0639

Stilo Stilo ST5 Earcup Set $34.95

Stilo ST5 Earcup Set Stilo passive noise attenuating removable earcups. Not for use with helmets equipped with built-in earcup communications. Can be used in conjunction with 3.5mm jack and in-ear buds, or without any communications installed.

Maglock Air Hose - Competition Motorsport

FluidLogic Maglock Air Hose from $31.80

Maglock Air Hose **Maglock Air hose side NOT included** Maglock Air Hose is built to our exact specifications to ensure that you get the lightest, most flexible hose on the market today. The feedback from our test pilots ensures you that neck fatigue during use is greatly reduced, furthermore, this hose does not leverage or disconnect the Maglock Air in high G or high impact environments. Used by top motorsports athletes including all Andretti Indy cars, Ricky Stenhouse Jr. (NASCAR), Ricky Johnson (TT), and Guy Cosmo (IMSA). We highly recommend our hose to be paired with Maglock Air.

Chillout Systems 1.5 Liter Coolant Formula - Competition Motorsport

Chillout Systems Chillout Systems 1.5 Liter Coolant Formula $30.00

Chillout Systems 1.5 Liter Coolant Formula This 1.5 liters of coolant will last a single racer an entire season! Non-toxic and biodegradable coolant that circulates through your Chillout Systems cooler and cooling garments, keeping you cool and your cooler running in prime condition. Does not evaporate, greatly extending the amount of time between refilling your system. Chillout cooling garments encase tubular veins within the material, covering a large surface area of the body to keep you cool, dry, and focused. We suggest you replace the Chillout Coolant in your system at least once per race season. It takes less than two minutes and keeps your cooling system running in peak condition.

Bell Bell Forced Air Low Profile Nozzle & Cover Plate (HP6/GT6 Helmet) $29.95

Bell Forced Air Low Profile Nozzle & Cover Plate Adds Genuine Bell Forced-Air Nozzle to Your HP6 or GT6 Helmet This clear plastic Bell Helmets forced-air kit consists of the following: (1) Forced-air low profile nozzle (1) Cover plate (2) Seal kits Each seal kit contains two pieces of 20 x 80mm and two pieces of 20 x 120mm double-sided tape.

Molecule Matte Helmet Care Kit MSHCK44 IMAGE

Molecule Molecule Matte Helmet Care Kit $29.95

Molecule Matte Helmet Care Kit This specially-bundled kit from Competition Motorsport makes it easy and safe to keep your racing helmet in top condition, clean and fresh. The light-duty Matte Detailer spray is designed to keep your Matte helmet exterior shell clean. Safe to use on all finishes, including flat and matte. Refresher spray keeps the inside of your helmet clean, while Anti-Fog helps to keep the inside of your visor clear. Rain Repel is excellent at keeping the outside of your visor clear and making it easy to clean off debris, bugs, etc. MOLECULE MATTE HELMET CARE KIT INCLUDES: (1) Helmet MATTE DETAILER 4 oz. (1) Helmet REFRESHER 4 oz. (1) Helmet RAIN REPEL 4 oz. (1) Helmet ANTI-FOG 4 oz. SKU: MSHCK44