Auto Racing Driver Safety Gear at CMS – Page 18

Chillout Systems 3" Neoprene Air Duct Hose from $79.00

Chillout Systems 3" Neoprene Air Duct Hose Chillout's Neoprene Air Duct Hose is extremely flexible, pliable and structurally strong thanks to a coated spring-steel wire helix that prevents it from collapsing. The fiberglass fabric cover and fiberglass cord are both impregnated and coated with neoprene rubber. With a temperature tolerance between -45° F and 330° F (7º C and 165º C), the Chillout Neoprene Air Duct Hose is ideal for most racing applications, including channeling fresh, cool air to your Chillout Quantum Cooler. It's also perfect for cockpit cooling and other low-pressure ducting applications where extreme heat can't be avoided. Under-hood applications such as connecting an air intake to an airbox, or an airbox to a throttle body are also great uses. Choose 6-foot or 12-foot overall length. Chillout Neoprene Air Duct Hose Features: 3 inch interior diameter High strength and flexibility Up to 330º F (165º C) heat resistance Product SKU: CH-ADH3

Stilo Carbon Peak Visors ST5 Helmets $279.95

Stilo ST5 Carbon Peak Visors Introducing the Stilo ST5 8860 Carbon Peak, the perfect accessory to enhance your racing experience. Designed as an optional extra for FIA8860 ST5 helmets, this peak is FIA approved and offers both style and functionality on the track. Similar to the bill of a ball cap, the ST5 Peak Visor by Stilo is effective at blocking the sunlight from your eyes. The peak visor can be adjusted to the angle of the sun throughout the day. Fitted for the SA2020 Stilo ST5 models, the ST5 peak is the perfect visor for keeping the sun out of your eyes. Stilo ST5 Peak Visors Details: Manufacturer: Stilo Fits Stilo ST5: Yes Stilo YA0862 Gloss Carbon Fiber (FIA 8859 weave) Stilo YA0863 Gloss Carbon Fiber (FIA 8860 weave)

Chillout Systems No Drip 1/4" Shirt Adapters $105.00

Chillout Systems No Drip 1/4" Shirt Adapters No Drip Adapters from Chillout Systems are designed to never leak and maximize the reliability of your driver cooling unit without the annoying "drip" when you disconnect. Chillout Systems No Drip 1/4" Shirt Adapter Details: Manufacturer: ChillOut Systems Manufacturer Part Number: CO-DLC-1 Works with other ¼" cooling shirts: Yes Quantity: 4 Pieces (2 complete sets) We have found in very long endurance races such as the 2021 World Racing league 24 Hours of Sebring, multiple driver changes have parasitic loss of fluid during the repetitious connecting of the drivers shirts. No Drip adapters also prevent unintentional release as the Shirt Adapters lock together, linking the hose to your system securely.

-59% sale

OMP First-S red racing glove facing right on a white background

OMP First-S Race Gloves | FIA 8856-2018 $49.66 $119.00

OMP First-S Race Gloves The OMP First-S Race Gloves combine dependable fire-resistant protection, secure steering-wheel grip, and everyday comfort in an affordable competition glove. Updated to meet the FIA 8856-2018 homologation standard, the First-S is designed for drivers who want modern safety and straightforward performance without stepping into a premium price category. Silicone printing across the palms and fingers improves traction and control, while redesigned finger inserts provide a closer, more comfortable fit. A straight-cut cuff with an elasticated wrist allows quick entry and keeps the glove securely positioned throughout each session. Affordable FIA-Approved Performance The OMP First-S is built for drivers who need certified protection and reliable control at a practical price. Its lightweight construction focuses on the features that matter most behind the wheel: grip, comfort, flexibility, and current FIA approval. This makes the First-S a strong choice for drivers replacing older equipment or purchasing their first pair of FIA-homologated racing gloves. Silicone Palm and Finger Grip Silicone printing is applied across the palm and fingers to create a secure connection with the steering wheel. The low-profile grip pattern improves traction without adding the bulk of a separate reinforcement layer. Extending the silicone onto the fingers also improves control of paddle shifters, switches, buttons, and other cockpit controls. Improved Finger Inserts Redesigned finger inserts help the glove follow the natural shape of the hand more closely. The improved construction reduces excess material and supports better comfort around the fingers during repeated steering inputs. A more precise fit can also improve dexterity and reduce hand fatigue during longer sessions. Comfort for Extended Track Use The OMP First-S is designed to remain comfortable through repeated laps and long track days. Its lightweight materials allow natural hand movement while minimizing unnecessary pressure and bulk. The close-fitting construction helps the driver maintain a relaxed grip rather than squeezing the wheel excessively to stay in control. Straight-Cut Elasticated Wrist A straight-cut cuff gives the First-S a clean, traditional appearance and allows easy overlap with a compatible racing suit sleeve. The elasticated wrist keeps the glove securely positioned without requiring a bulky hook-and-loop strap. The flexible opening also makes the gloves quick and easy to put on or remove between sessions. Modern OMP Styling The OMP First-S features updated graphics and is available in multiple color options. Drivers can coordinate the gloves with OMP suits, shoes, helmets, and other racing equipment for a consistent competition look. FIA 8856-2018 Homologated Protection The OMP First-S Race Gloves are homologated to FIA 8856-2018, the current standard for fire-resistant driver clothing used in many forms of automobile competition. Drivers should always confirm the exact equipment requirements of their sanctioning organization before entering an event. OMP First-S Nomex Glove Features Lightweight fire-resistant racing glove construction Silicone printing across the palm and fingers Low-profile grip preserves steering sensitivity Improved finger inserts enhance fit and comfort Straight-cut cuff provides a clean, streamlined fit Elasticated wrist allows easy entry and secure retention Available in multiple modern colorways FIA 8856-2018 homologated OMP First-S Nomex Glove Specifications Manufacturer: OMP Model: First-S Product Type: Fire-Resistant Auto Racing Gloves Palm: Silicone-printed grip Fingers: Silicone grip print with improved inserts Wrist: Elasticated closure Cuff: Straight cut Available Sizes: XS through XXL Homologation: FIA 8856-2018 Why Choose the OMP First-S? The First-S offers a practical balance of certified protection, secure grip, and comfort. Its silicone palm and finger print improve control, while the updated finger construction and elasticated wrist keep the fit simple and dependable. For drivers seeking a current FIA-approved glove with strong value and recognizable OMP styling, the First-S is an excellent competition-ready option. OMP First-S Nomex Glove Size Chart Frequently Asked Questions Are the OMP First-S Race Gloves FIA approved?Yes. The OMP First-S is homologated to the FIA 8856-2018 standard. Can the OMP First-S Gloves be used for competitive racing?Yes, when FIA 8856-2018-approved gloves meet the requirements of the racing organization or event. Do the gloves have silicone grip on the fingers?Yes. Silicone printing covers both the palm and fingers to improve steering-wheel and cockpit control. What is the benefit of the improved finger inserts?They provide a closer, more comfortable fit while reducing excess material and helping maintain dexterity. Do the OMP First-S Gloves have a wrist strap?No. An elasticated wrist keeps the gloves securely positioned without a separate adjustment strap. What sizes are available?The OMP First-S Race Gloves are available in sizes XS through XXL. Are these gloves suitable for long races or track sessions?Yes. Their lightweight construction and improved finger fit are designed to reduce fatigue during extended use. How should I clean the OMP First-S Gloves?Hand wash them gently with mild soap and cool water, then allow them to air dry. Avoid machine washing, bleach, strong chemicals, and high heat. How should the OMP First-S Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips.

Chillout Systems Quantum Cooling Package - Competition Motorsport

Chillout Systems Quantum Pro Cooling Package from $4,379.00

Chillout Systems Complete Quantum V3 Pro Cooling Kit This Competition Motorsport-exclusive kit contains everything required for a complete installation of the amazing Chillout Systems Quantum V3 driver cooling system. With lots of options and upgrades to choose from, you'll be able to configure precisely the Chillout cooling system that suits your needs. The heart of the system, the Chillout Quantum V3 Cooler, is a simple-to-use driver cooling unit that offers 5 temperature settings to support varying racing conditions. Two powerful 175 CFM fans help decrease amp draw while moving a lot of air, and a bright easy-to-read digital display on the Quantum Cooler V3 makes dialing in your cooling super simple. This groundbreaking ice-less cooling system is engineered to incredibly high standards and built like a tank. It eliminates the race day nuisances that come with inferior cooling methods requiring constant filling and dumping of ice and water. Plus, the Chillout Quantum V3 saves the added weight by cutting out all the bulk. No ice, no water, no maintenance. Focus on what’s important: winning! Chillout Systems Complete Quantum Cooling Base Package: Chillout Systems Quantum V3 Cooler Wiring harness Steel mounting tray Chillout Club Series cooling shirt Dual prong connector Chillout Systems coolant formula (1.5 liter) Chillout Systems 6-foot insulated coolant hose 40-amp inline fuse Optional Quantum Cooling Package Upgrades: Upgrade to the Quantum Cooler Pro (see comparison below) 10-Foot insulated coolant hose Insulated Y-Hose for driver/co-driver cooling (6-foot main, two 4-foot branches) Pro Touring SFI cooling shirt Carbon Fiber Air Duct Plenum (increases air flow & cooling capacity) Rapid Release Connector (includes roll bar and flush mounts, easy push-on connection, and emergency pull release) Wired remote control What makes the Chillout Systems Quantum V3 Cooler superior to other driver cooling systems? Complete control over coolant temperature, not just the flow of liquid Bright, easy-to-read digital display on the cooler or remote control unit Requires 25% less space to mount, fits nearly any vehicle Say goodbye to the hassle of dumping and filling ice and water Chillout System weighs far less than any competing system A 1.5-liter coolant pack lasts most drivers an entire season With the Chillout Second Vehicle Kit (available separately), your cooler can be hot-swapped to another car in under two minutes Quantum Pro vs Quantum V3 Here are a few added features of the Quantum Cooler Pro: Full color LCD display showing more extensive data Internal bypass valve (no need for a coolant loop) lets the system cool the reservoir with no shirt connected Dual 4-inch 220 CFM brushless fans 50% larger condenser and 25% larger evaporator Coolant reservoir has twice the capacity Eco Mode keeps the system drawing under 18 amps at all times

Simpson Hybrid S Head and Neck Restraint (Custom Female Fit) $1,199.95

Custom Fit Simpson Hybrid-S If you want the best in comfort and protection, a Custom Fit Hybrid-S is the answer. This is a custom, made to measure Simpson Hybrid-S device that will give you not just the safety you need, but comfort every lap. Great for females or anyone that wants a custom Hybrid-S. This is a custom made to measure device that will be made to your exact dimensions. Your custom device is usually ready to ship within 14 days. After you place your order, please email us a copy of your purchase receipt with the measurements outlined below and let us make you the most comfortable SFI 38.1 helmet restraint you will ever wear. Simpson Hybrid-S Head and Neck Restraint Details Manufacturer: Simpson Manufacturer part number: SIM-HYS-CUSTOM Rating: FIA 8858-2010 Works with 3 way factory belts Works with racing 4/5/6/7 way racing harness High quality carbon fiber construction Low profile. No high back to hook on the bars on exit Multiple load paths to dissipate head loads Buckle attachment in front. No bulky straps underneath Full Carbon Fiber "S" Model Connects to standard Hans Post Anchors, not included Legal for NASA, PCA, SCCA, BMWCCA, SCCA Pro, IMSA, SRO, NHRA Measuring Your Custom Female Simpson Hybrid-S Step 1: Wearing your favorite racing suit or normal driving apparel, measure over your outermost layer. Your new Simpson Custom Female device will always be on the outside with nothing covering it. Step 2: Measure just below the bottom of the bra all the way around. Fill in this number in inches (including fractions) or centimeters. Step 3: Measure from top of shoulder over breast to bottom of bra. Fill in this number in inches (including fractions) or centimeters. FIA Approved Simpson Hybrid-S Works With Three-Point Belts The Hybrid-S Head Restraint by Simpson is the only head restraint approved for use with three-point restraints (such as standard seat belts) that is also FIA approved. This provides added protection for driving instructors, auto manufacturing test engineers, and other drivers using three-point restraints. Simpson's Top Concern Is Safety DE drivers and instructors can now be safe while in the student's car using only the standard three-point seat belts. Factory seat belts were not compatible with a Head and Neck Restraint until the Simpson Hybrid Nascar Approved Head And Neck Restraint became FIA approved. Stay safe in every vehicle. Note: for the best protection while driving on a race track, we suggest a Full-Containment Cockpit System that includes a full-containment seat, Snell- or FIA-rated auto racing helmet, FIA or SFI approved Head and Neck Restraint, and six- or seven-point racing harness system.

Paragon Guardian Insulated Cooling Water Hose from $88.00

Paragon Guardian Water Hose Set Paragon’s innovative Guardian Water Supply/Return Hose Set is designed for efficiency and durability. The Guardian Hose is insulated to keep your cooling garment supplied with icy cold water from a Paragon Viking or Arctic Fox cooler. The supply side of the Paragon Guardian Water Supply Hose delivers cooling water to the tubing inlet of your garment, while the return side of the hose set returns water warmed by body heat back to the cooler to be re-chilled and recirculated. Foam insulation acts as a thermal barrier to properly maintain the temperature of the water being supplied to your cooling garment. Paragon Guardian connectors on the hose set are designed for emergency release, allowing you to easily disconnect with a quick pull on the hose set or garment. Paragon Guardian Supply Hose Lengths 4 feet (2 lbs.) 8 feet (2 lbs.) 12 feet (3 lbs.) 20 feet (4 lbs.)

Paragon Viking Cooler Mounting Tray from $128.99

Paragon Viking Cooler Mounting Tray Paragon’s Viking Cooler Mounting Tray is designed to provide a customized mounting option with protection for Paragon’s Viking and Viking Pro driver cooling systems. The Paragon Viking Cooler Mounting Tray includes two Viking tray straps that secure the cooler while allowing access to the interior without having to remove the cooler from the tray. Made from a single sheet of steel and powder-coated black for durability. The Viking Cooler Mounting Tray is available to fit either the 12L or 18L Paragon Viking cooler. Paragon Viking Cooler Mounting Tray Dimensions Fits 18L cooler: 4 lbs., 16" x 10" x 6" Fits 12L cooler: 3 lbs., 14" x 9" x 4"

Paragon Air Blower Bundle $264.50

Paragon Air Blower Bundle Paragon’s Air Blower Bundle is assembled as a complete, all-in-one kit. The Paragon Air Blower Bundle is perfect when you want to bring fresh air into your helmet, and includes all the necessary Paragon products to connect a NACA duct inlet to your helmet. The Paragon Air Blower Bundle is light weight and compact, weighing only 6 lbs. total. Click Here for Installation Instructions The Paragon Air Blower Bundle Includes: Blower Air Filter Blower Air Filter Screen 1.25” Air Hose (10ft) 3” Air Hose (5ft) 240 CFM Blower Angled Helmet Fitting 4” Blower Hose Fitting 4” Blower Filter Housing Fitting

Paragon Defense Solution Maintenance Additive (16-oz.) $11.99

Paragon Defense Solution 16 Oz. Paragon Defense Solution enhances cooler, garment, and hose performance in your driver cooling system by defending against mold and bacteria growth. Paragon Defense Solution is formulated to safeguard your cooling investments against mold, mildew, and harmful bacteria that cause reduced water flow and musty odors. Paragon Defense Solution is non-toxic, biodegradable, and environmentally friendly. It's also compatible with non-Paragon ice water-based coolers. This non-toxic, biodegradable solution contains a fungicide that is safe to use in all Paragon cooling systems. Regular use of Paragon Defense Solution will not only help keep your system clean, it will also improve the performance and life of your system's fluid pump. Use 2 oz. of additive every time your driver cooling system is used (or 6 oz. for the large, multi-person pit cooling systems).

Paragon Guardian Male Connector $24.99

Paragon Guardian Hose Connector Paragon’s Guardian Male Connector is a replacement for any existing 1/4” or 5/16" Guardian Connector used on Paragon cooling garments and Guardian water hose sets. The Guardian Male Connector functions as a dry-break emergency release, allowing you to easily disconnect from your cooling system with a quick pull on your water hose set or connected garment. Compatible With Paragon, Coolshirt, Momo, and F.A.S.T. The Paragon Guardian Male Connector is compatible with female connectors used by Paragon, Coolshirt, Momo, and F.A.S.T. This means that, no matter what brand of driver cooling system you have, a Paragon cooling shirt will work with it because the shirt has two Paragon Guardian Male Connectors (inlet/supply and outlet/return) If you own a Momo or F.A.S.T. cooling shirt and want to use it with a Paragon system, simply purchase two of these Guardian male connectors, snip off the connectors on your shirt, and replace them with the Guardians. That's it! Paragon Guardian Male Connector Details Manufacturer: Paragon Connector type: male Barbed-end size: regular 1/4" (6mm) or large 5/16" (8mm) Universal dry-break connector Priced/sold individually

Paragon Cooling Water Shirt from $165.00

Paragon Cooling Water Shirt The Paragon Cooling Water Shirt is designed for optimum performance and cooling efficiency under the harshest, hottest racing conditions. Made from 6.1 oz, 100% sustainably-sourced ring spun cotton, the Paragon Cooling Water Shirt includes ample tubing to cover your core, keeping you cool during the most intense race laps. Available in sizes XXS through XXXXL with a true-to-size fit, black or white in color, and right- or left-exit tubing connectors. A fantastic Paragon innovation is the option to add a Cooling Hood to the Paragon Cooling Water Shirt, delivering cooling water to your head as well as your core. The Paragon Cooling Hood is made from the same high-quality material as the shirt for a seamless connection. Pair with a Viking Cooler or Arctic Cooling Bag System The Paragon Cooling Water Shirt paired with a Viking System or Arctic Bag System (each sold separately) circulates ice-cooled water over the wearer's torso, keeping you comfortable and focused especially during those hot, late laps when heat fatigue can easily set in. The Paragon Cooling Water Shirt also connects easily to any cooling system with a quick-disconnect Paragon Guardian insulated hose (sold separately). Advanced moisture-wicking properties, antimicrobial protection, and “clean seam” tubing sewn into the interior of the Paragon Cooling Water Shirt keeps the driver dry and comfortable. Paragon's patented non-kink tubing ensures consistent, continual cooling water flow. Paragon Cooling Water Shirts are easy to care for with no special laundering needed. Just machine wash and hang to dry. This shirt won’t pick, fade, or shrink. Paragon Cooling Water Shirt Details Manufacturer: Paragon Pro Sizes: XXS to XXXL Colors: Black or White Tubing exit: Left or Right Material: 6.1 oz. ring spun 100% cotton Optional Cooling Hood

Paragon Guardian Female Bulkhead Connector $24.99

Paragon Guardian Female Bulkhead Connector Paragon’s Guardian Female Bulkhead Connector is available as a replacement for a damaged female Guardian bulkhead connector on any Paragon Viking, Viking Pro, or Viking Pro Dual cooler, as well as Arctic Wolf, Arctic Wolf Pro, Arctic Fox and Arctic Fox Pro cooler bags. The Guardian Female Bulkhead Connector is Paragon’s emergency release connector option, allowing easy disconnection from your cooling system with a quick pull on the connected hose set or cooling garment. Priced/sold individually. Paragon Guardian Female Bulkhead Connector Details Manufacturer: Paragon Emergency release: yes Replaces broken fitting on your Paragon Viking cooler or cooler bag Sold individually

Paragon Viking Pro Cooler 12V Air and Water Cooler from $522.99

Paragon Viking Pro Cooler 12V Air and Water Cooler The Paragon Viking Pro 12V Cooler is the amped-up version of the regular Viking 12V Cooler. The Viking Pro Cooler is built to be durable and efficient with its 12-volt pump providing constant circulation of cold water through Paragon cooling garments. The addition of a u-shaped aluminum air tube inside the cooler, designed specifically for helmet cooling, when connected to a blower system, is what makes this Paragon’s Pro version. The side exit Guardian bulkhead connectors on the Viking Pro Cooler are Paragon’s emergency release option, allowing easy disconnection with a quick pull on the connected hose set or garment. The Viking Pro 12V Cooler is available in 12L or 18L capacity and works seamlessly with most cool suit brands. Paragon Pro 12V Cooler Dimensions 12 Liter: 10 lbs, 19" x 13" x 13" 18 Liter: 10 lbs, 19" x 13" x 13" Paragon cooling garments are sold separately.

Paragon Viking Pro Air & Water Cooling Bundle from $1,299.00

Paragon Viking Pro Air & Water Cooling Bundle The Paragon Viking Pro Air & Water Bundle can be used with any Paragon cooling garment. It effectively sends temperature-controlled cooling water through the garment along with blower-enhanced, cooled, HEPA-4 filtered air to your helmet. The Paragon Viking Pro Air & Water Bundle provides 300 Watts (1,023 BTU) of continuous cooling per hour. Its 240 CFM blower and 12- or 18-Liter cooler unit with internal pump deliver temperature-controlled cool water to your Paragon cooling garment (sold separately) and chilled air to your helmet. Eight feet of double-insulated water hose, complete with dry quick-disconnects and an automatic shutoff, attach your cooling shirt to the unit. Paragon Viking Pro Air & Water Bundle Details Manufacturer: Paragon Paragon 12- or 18-liter cooler with internal 12V fluid pump Cooler mounting tray with two straps 8-foot insulated Guardian water supply hose with dry-break disconnects 240 CFM air blower 10 foot x 1.25" air hose 5 foot x 3.0" air hose 1.25" hose end fittings (2) Angled helmet fitting 4" blower hose fitting 4" blower filter housing fitting Blower air filter Blower air filter screen Everlast Ice cool pack Defense Solution (16 oz.) Paragon cooling garments sold separately.

Find anything you need

Driver Gear

If you wear it to protect yourself while racing, you'll find it in the Competition Motorsport Driver Gear collection.