Driver Cooling & Hydration

Chillout Systems 4-Inch 285 CFM Blower An ultra-efficient and lightweight design, the Chillout 4-inch 285 CFM blower offers high air output and low amp draw. This is the most powerful and reliable blower in its class. FEATURES: 285 cubic feet per minute (CFM) 4.7 Amps 12 Volts Lightweight, durable, and ultra-reliable

Maglock Air Kit **Maglock Air hose NOT included** Maglock Air - Helmet Side Only KitWhat's included:Maglock® Air Helmet sideMaglock® Air Dust CapMaglock® Visor StickerTool Kit

Paragon 1.5" Air Supply Hose (10 Feet) Paragon’s 1.5” diameter x 10’ length Air Hose is designed to work with Paragon Viking Pro coolers, Viking Pro Bundles, and Air Blower Bundles. At 1.5” diameter, the Paragon Air Hose is small and flexible enough to route to your helmet without any necessary weight, giving you great head cooling while aiding in keeping fog off your visor. Paragon 1.5" Air Supply Hose Details Manufacturer: Paragon Manufacturer part no.: 02-45000 Hose OD: 1.5" Hose length: 10 feet Weight: 2 lbs.

CoolShirt Replacement Fan/235 CFM Air Blower System This is the factory replacement fan for CoolShirt's ABS-C 235 CFM Air Blower System to keep delivering clean, fresh air to the racer's helmet from the racecar's outside intake. The 235cfm blower is perfect for "hot blooded" drivers or for enduro drivers needing a cooler core temp when the cockpit temperature rises. Keep it running with this replacement fan. CoolShirt Replacement Fan/235 CFM Air Blower System Details:  Manufacturer: CoolShirt Manufacturer part number: 5013-0002 CFM: 235 Voltage: 10-16.8 V Wiring: Yellow+ (Positive), Black - (Ground/Common)

Chillout Systems 3" Neoprene Air Duct Hose Chillout's Neoprene Air Duct Hose is extremely flexible, pliable and structurally strong thanks to a coated spring-steel wire helix that prevents it from collapsing. The fiberglass fabric cover and fiberglass cord are both impregnated and coated with neoprene rubber. With a temperature tolerance between -45° F and 330° F (7º C and 165º C), the Chillout Neoprene Air Duct Hose is ideal for most racing applications, including channeling fresh, cool air to your Chillout Quantum Cooler. It's also perfect for cockpit cooling and other low-pressure ducting applications where extreme heat can't be avoided. Under-hood applications such as connecting an air intake to an airbox, or an airbox to a throttle body are also great uses. Choose 6-foot or 12-foot overall length. Chillout Neoprene Air Duct Hose Features: 3 inch interior diameter High strength and flexibility Up to 330º F (165º C) heat resistance Product SKU: CH-ADH3

Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system. The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED: 3" Air Duct Plenum

Paragon 4.4AH Li-Ion Arctic Wolf/Fox Battery Paragon’s Wolf/Fox Battery Charger is designed for use with the Paragon Arctic Wolf/Fox Li-Ion Battery. The Arctic Wolf/Fox Battery Charger has an indicator light that illuminates bright green when your battery is fully charged. Plugs into any standard US 110-120V electrical outlet. Paragon Arctic Wolf/Fox Battery Charger Details Manufacturer: Paragon Manufacturer part no.: 03-29400 Input voltage: 110-120V Battery included: no Weight: 1 lb.

Paragon Drain Kit Paragon’s Drain Kit is the ultimate accessory for draining water from Paragon cooling garments, hose sets, coolers, and bags. The Paragon Drain Kit includes two male connectors and two female connectors.

Paragon 3.0" Air Supply Hose (5 Feet) Paragon’s 3” diameter x 5’ length Air Hose is designed to work with most NACA ducts on the market, channeling fresh air from outside the car to feed your Paragon 240 CFM blower. When connected to a Viking Pro Cooler, this provides optimized cool air flow into your helmet for excellent head cooling. Paragon 3.0" Air Supply Hose Details Manufacturer: Paragon Manufacturer part no.: 03-45000 Hose OD: 3.0" Hose length: 5 feet Weight: 2 lbs.

Paragon 4.0" Blower Filter Housing Fitting Paragon’s 4” Blower Filter Housing Fitting is custom made for connecting Paragon’s 3” Air Hose to the 4" inlet of Paragon’s 240 CFM Air Blower. The Paragon 4” Blower Filter Housing Fitting is made to house Paragon’s Blower Air Filter Screen and Paragon’s Blower Air Filter (each sold separately).

Maglock Air Hose **Maglock Air hose side NOT included** Maglock Air Hose is built to our exact specifications to ensure that you get the lightest, most flexible hose on the market today. The feedback from our test pilots ensures you that neck fatigue during use is greatly reduced, furthermore, this hose does not leverage or disconnect the Maglock Air in high G or high impact environments. Used by top motorsports athletes including all Andretti Indy cars, Ricky Stenhouse Jr. (NASCAR), Ricky Johnson (TT), and Guy Cosmo (IMSA). We highly recommend our hose to be paired with Maglock Air.

Paragon 4.0" Blower Hose Fitting Paragon’s 4” Blower Hose Fitting is custom made for connecting the Paragon 1.25” Air Hose to Paragon’s 240 CFM Air Blower.

Chillout Systems 1.5 Liter Coolant Formula This 1.5 liters of coolant will last a single racer an entire season! Non-toxic and biodegradable coolant that circulates through your Chillout Systems cooler and cooling garments, keeping you cool and your cooler running in prime condition. Does not evaporate, greatly extending the amount of time between refilling your system. Chillout cooling garments encase tubular veins within the material, covering a large surface area of the body to keep you cool, dry, and focused. We suggest you replace the Chillout Coolant in your system at least once per race season. It takes less than two minutes and keeps your cooling system running in peak condition.

Chillout Systems Hose Connectors (Pair) Designed to withstand wear, these military-grade cooling adapters improve the reliability of the Chillout Quantum Cooler by latching securely and enabling coolant formula to cycle through the system with no leakage. This ultra-durable design allows thousands of dry connections and disconnections. Sold in pairs.

Chillout Systems Dual Prong Adaptor Designed to withstand wear, this military-grade dual-prong liquid connector maximizes the reliability of your driver cooling unit. The dual-prong design latches securely, enabling your Chillout hose to be linked to your system while preventing unintentional release. Dual-prong adapter connects Chillout cooling garments (or other brands cooling shirts with ¼” tubing) to a Chillout Systems driver cooling system with ¼” adapters.

Paragon Guardian Female Bulkhead Connector Paragon’s Guardian Female Bulkhead Connector is available as a replacement for a damaged female Guardian Bulkhead Connector on any Paragon Viking, Viking Pro, or Viking Pro Dual cooler, as well as Arctic Wolf, Arctic Wolf Pro, Arctic Fox and Arctic Fox Pro cooler bags. The Guardian Female Bulkhead Connector is Paragon’s emergency release connector option, allowing easy disconnection from your cooling system with a quick pull on the connected hose set or cooling garment. Priced/sold individually. Paragon Guardian Female Bulkhead Connector Details Manufacturer: Paragon Emergency release: yes Replaces broken fitting on your Paragon Viking cooler or cooler bag Sold individually